SMS Solid Stainless Cylinders

Size: px
Start display at page:

Download "SMS Solid Stainless Cylinders"

Transcription

1 SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function in Washdown Applications or other Harsh Environments A U R O R A A I R P R O D U C T S 35

2 SMS DESIGN FEATURES Piston rod is hard chrome plated type 303 stainless Rod extension/wrench flats are long enough to fit standard wrenches. Special heavy duty wiper not only seals out solid contaminants but also effectively prevents liquids and gases from entering the cylinder interior. End caps are type 303 stainless steel Clean crevice free threaded construction assures maximum strength and allows easy wash down Heavy /8 wall type 304 stainless tube is precision honed Brass or aluminum piston is attached with a high strength threaded joint. Reduce noise and fatigue problems such as rod breakage with urethane/nitrile shock pads. Add " to the cylinder length for each pad. Pneumatic use only to 80 F. Pneumatic rod seal is a "longlife" nitrile cup. Hydraulic rod seal is pressure energized and extra long wearing for improved sealability. Composite rod bushing has high temperature capability and excellent chemical resistance. Solid lubricant fillers provide excellent wear characteristics for non-lube service. The bearing is inboard of the wiper and seal, away from the environment Optional wick provides teflon lube for non-lube service on O ring piston. Standard piston seal is large cross section O ring. Compounds are carefully selected for maximum cycle life. Optional U cup piston seals with teflon wear strip stretch the limits of service even futher. Reduce friction and operate without lube in the severest applications while extending or eliminating the service interval. If space permits for applications involving side loads or long strokes, select SMS, 2, 3, 5, 7, 8, 9, which have extra long bearings with added space between support points. Strokes longer than the maximum listed in the ordering procedure can be produced but careful consideration must be given to how the cylinder is applied how well is the load supported or guided, is the cylinder used in push or tension, is the cylinder vertical or horizontal, etc. Consult factory on all strokes longer than standard. Stroke increments other than standard can also be made. Special lengths are generally available in a few days and are priced as "non-standard" strokes. 36

3 /8 BORE SMS STAINLESS 200 PSI MAX. AIR 500 PSI MAX. HYD. Non shock SMS Options Shock Pads Viton Seals Non-lube Service Magnetic Piston U Cup Piston 90 Rear Clevis Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 8# Fully compressed 22# Spring material Stainless steel Optional Male Rod Thread -24 UNF 2A -4SS Nut Nose Mounting Nut Not included with cylinder Order Separately 8-8 Stainless SS-375 Rod Clevis & Nut 5/6 SMS SMS SMS3 7/ ID UNF THR'D, EQUAL SPACED ON.687 B.C. (CLEARANCE FOR #6 S.H.C.S.) SMS /8 + STROKE 3 + STROKE 3 /8 + STROKE UNS.999 PILOT.996 x 7/64 LG HEX 5/ UNS x DP..996 PILOT.999 x 7/64 LG UNS PILOT x 7/64 LG. 5/6-24 x DP. HEX 2 27/32 + STROKE HEX -4 UNS.999 PILOT.996 x 7/64 LG. HEX 5/6-24 x DP. 5/6-24 x DP. Series SMS Solid Stainless -24 THREAD SQUARE SS-30 Clevis Pin assembly Used on SS SS-90 St d Clevis Brk t Used on SMS 2 Series 300 Stainless R. PER PART.378 3/6 3/6 SSC-40 Low Profile Clevis Brk t Used on SMS /32 3/6 7/8.380 /32 SQ. TYP. 7/64 THRU, 4 PLC. 2 37

4 /8 BORE SMS STAINLESS SMS /8-27 N.P.T. 2 3/32 + STROKE DBL ACTING 9/6 + STROKE 5/6-24 x DEEP DRILL AND C-BORE FOR #0 S.H.C.S., SQUARE -20 x DEEP, Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 8# Fully compressed 22# Spring material Stainless steel /32 + STROKE 5/6-24 x DEEP SQ Optional Male Rod Thread.25 SMS7 /8-27 N.P.T /32 + STR DBL ACTING 2 7/8 + STROKE 3/6 DRILL AND C-BORE FOR #0 S.H.C.S., -20 x DEEP, SQUARE 5/6-24 x DEEP -24 UNF 2A WHEN YOU VE FINALLY HAD IT WITH PLATED CYLINDERS... SMS8 3/6 DRILL AND C-BORE FOR #0 S.H.C.S., -20 x DEEP, /8 + STROKE 5/6-24 x DEEP SQUARE SS-375 Rod Clevis & Nut 5/6 SMS9 3/6 DRILL AND C-BORE FOR #0 S.H.C.S., -20 x DEEP, -24 THREAD SQUARE 2 7/8 + STROKE 5/6-24 x DEEP SQUARE 3/ SS-30 Clevis Pin assembly Used on SS-375 SMS0 5/

5 24 HOUR DELIVERY 200 PSI MAX. AIR 500 PSI MAX. HYD. Non shock SMS Options Shock Pads Viton Seals Non-lube Service Magnetic Piston U Cup Piston Non-rotate (SMA 7, 8, 9, 4, 5, 7) 90 Rear Clevis 3 /8 + STROKE SMS 5/6 5/6-24 x DEEP SQUARE /3 SSC-40 Low Profile Clevis Brk t Used on SMS6 2 /8 + STROKE 0-32 UNF THR'D, EQUAL SPACED ON.687 B.C. (CLEARANCE FOR #6 S.H.C.S.) /32 3/6 7/8 /32 SQ. TYP. 7/64 THRU, 4 PLC. SS-90 St d Clevis Brk t Used on SMS 6 Series 300 Stainless steel R. PER PART.378 3/6 SS-90T Trunnion Brk t Used on SMS 0,.380 3/6 304 Stainless 2 SMS4 SMS5 7/8 + STROKE 2 + STROKE 5/6-24 x DP UNF THR D, EQUAL SPACED ON.687 B.C. (CLEARANCE FOR #6 S.H.C.S.) 45 5/6-24 x DP UNF THR'D, EQUAL SPACED ON.687 B.C. (CLEARANCE FOR #6 S.H.C.S.) Series SMS Solid Stainless R. PER PART.378 3/6 3/6 RAISE THE BAR FOR YOUR COMPETITORS BY SELECTING AURORA SOLID STAINLESS PRODUCTS SMS6 SMS7 7/ ID. 27/32 + STROKE 5/6-24 x DP UNF THR'D, 8 HOLES EQUAL SPACED ON.687 B.C. (CLEARANCE FOR #6 S.H.C.S.) 5/6-24 x DP. 2 39

6 BORE SMS STAINLESS 200 PSI MAX. AIR 500 PSI MAX. HYD. Non shock SMS SMS /32 + STROKE -2 UNF.249 PILOT.246 x /64 LG. / 2-24 x DP. 3 7/8 + STROKE 2 9/6 /6 Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 5# Fully compressed 50# Spring material Stainless steel Optional Male Rod Thread I.D. /8-27 NPT -2 UNF.249 PILOT.246 x /64 LG. -24 x DP. -20 UNF 2A SMS /6 + STROKE -2SS Nut Nose Mounting Nut Not included with cylinder Order Separately 7/8 23/32-2 UNF.249 PILOT.246 x /64 LG. -24 x DP. SMS5-20 UNC THR'D. EQUAL SPACED ON 2.87 B.C. (CLEARANCE FOR #0 S.H.C.S.) 2 3/32 + STROKE SS-500 Rod Clevis and Nut /6 2 SMS UNF.249 PILOT.246 x /64 LG. 2 5/32 + STR 9/6-24 x 2 SQUARE -24 x DP. -20 THREAD 7/8 SQUARE.377 SS-50 Clevis Pin Assembly Used on SS-500 /8-27 N.P.T. + STR CLEAR -20 S.H.C.S., 5/6-8 x, 40

7 ALL AURORA PRODUCTS AVAILABLE FOR 24 HOUR DELIVERY SMS Options Shock Pads Viton Seals Non-lube Service Magnetic Piston U Cup Piston Non-rotate (SMA 7,8,9) 90 Rear Clevis SSC-90 Low Profile Clevis Brk t Used on SMS 2 Series 300 Stainless /32 TYP. SS-00 St d Clevis Brk t Used on SMS 2 Series 300 Stainless 9/6 /6 SS-00T Trunnion Brk t Used on SMS 0, 304 Stainless 3/32 7/64 THRU, 4 PLC. /32 2 PLC. 3/6 R. R. /32 2 PLC. 3/6.635 SQUARE 2 /32 THRU THRU SMS7 SMS8 SMS /32 + STROKE 2 SQUARE 9/6-24 x /8-27 N.P.T. 2 /8-27 N.P.T /6 2 7/32 + STR /8-27 N.P.T. /8-27 N.P.T. CLEAR -20 S.H.C.S., CLEAR -20 S.H.C.S., 5/6-8 x, 2 3/32 + STROKE 2 SQUARE 9/6-24 x /6 CLEAR -20 S.H.C.S., 5/6-8 x, 3 3/6 + STROKE 2 SQUARE 9/6-24 x 2 3/32 + STROKE TYP. /6 2 SQUARE 5/6-8 x, -24 x Series SMS Solid Stainless 9/6 /6 2 All Aurora Cylinders are 00% Factory Tested to insure Trouble Free Performance SMS0 SMS /8-27 N.P.T. /8-27 N.P.T. 2 /8-27 N.P.T. 3/6 3 3/6 + STROKE TYP. 3/6 3/32 TYP. -24 x 3/32 TYP. 2 SQUARE

8 BORE SMS STAINLESS 200 PSI MAX. AIR 500 PSI MAX. HYD. Non shock 2 SMS4 2 3/6 + STROKE 3/32 + STROKE -20 UNC THR'D. EQUAL SPACED ON 2.87 B.C. (CLEARANCE FOR #0 S.H.C.S.) -24 x DP UNC THR'D. EQUAL SPACED ON 2.87 B.C. (CLEARANCE FOR #0 S.H.C.S.) Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 5# Fully compressed 50# Spring material Stainless steel Optional Male Rod Thread 2 2 SMS /6 9/6 2 7/8 + STROKE -24 x DP UNC THR'D. EQUAL SPACED ON 2.87 B.C. (CLEARANCE FOR #0 S.H.C.S.) 2 SS-500 Rod Clevis and Nut -20 UNF 2A /6 2 SMS I.D. 3/32 + STROKE -24 x DP UNC THR'D. 8 HOLES EQUAL SPACED ON 2.87 B.C. (CLEARANCE FOR #0 S.H.C.S.) -20 THREAD 7/8 SQUARE.377 SS-50 Clevis Pin Assembly Used on SS SMS7 SSC-90 Low Profile Clevis Brk t Used on SMS 6 Series 300 Stainless /32 3/ /32-24 x DP. SS-00 St d Clevis Brk t Used on SMS 6 Series 300 Stainless /32 2 PLC. 2 R. THRU All Aurora Cylinders are Fully Repairable TYP. SQUARE 7/64 THRU, 4 PLC. 9/6 /6 3/6 2 42

9 2 BORE SMS STAINLESS 200 PSI MAX. AIR 500 PSI MAX. HYD. Non shock Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 20# Fully compressed 75# Spring material Stainless steel /32 + STROKE Optional 8 ports available UNF.249 PILOT.246 x /64 LG. SMS 2-20 x DP. Optional Male Rod Thread /8-8 UNF 2A -2SS Nut Nose Mounting Nut Not included with cylinder Order Separately 7/8 23/ / STROKE 2/64.50 I.D Optional 8 ports available UNF.249 PILOT.246 x /64 LG STROKE SMS2-20 x DP. SMS3 Series SMS Solid Stainless 8-8 Stainless SS-625 Rod Clevis and Nut 2 Optional 8 ports available 5/6-8 UNC THR'D. EQUAL SPACED ON B.C. 3 + STROKE (CLEARANCE FOR S.H.C.S.) / UNF PILOT x /64 LG x DP. SMS5 2 SQUARE -8 THREAD.502 SS-60 Clevis Pin Assembly Used on SS /8 SS-00 St d Clevis Brk t Used on SMS 2 Series 300 Stainless /32 2 PLC. R. THRU -2 UNF.249 PILOT.246 x /64 LG. -20 x DP. Make the Best Choice /6 /6 3/6 2 ask for Technical Support 43

10 2 BORE SMS STAINLESS 200 PSI MAX. AIR 500 PSI MAX. HYD. Non shock SMS6 25/ STROKE 23/ /8-27 NPT /32 5/6 + STROKE CLEAR S.H.C.S. Optional 8 ports available 2 SQUARE 5/6-8 x DEEP, -20 x DEEP Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 20# Fully compressed 75# Spring material Stainless steel 25/ STROKE 25/32 2 SQ Optional Male Rod Thread /8.750 SMS7 2 /8-27 NPT 2 3/32 + STR 7/8 Optional 8 ports available 3 /32 + STROKE 7/8 CLEAR S.H.C.S. -20 x DEEP 5/6-8 x DEEP, 2 SQ -8 UNF 2A SS-625 Rod Clevis and Nut SMS8 2 25/32 Optional 8 ports available 3 + STROKE 7/ x CLEAR S.H.C.S. 5/6-8 x SQ -8 THREAD SQUARE.502 SS-60 Clevis Pin Assembly Used on SS x 44 SMS9 SMS0 2-8 NPT -8 NPT 25/32 Optional 8 ports available 3 /32 + STROKE CLEAR S.H.C.S. 3/32 TYP /32 TYP. -20 x /6-8 x 2 SQ TYP. You CAN Buy Peace of Mind Aurora Stainless

11 ALL AURORA PRODUCTS AVAILABLE FOR 24 HOUR DELIVERY SMS Options Shock Pads Viton Seals Non-lube Service Magnetic Piston U Cup Piston Non-rotate (SMA 7, 8, 9, 4, 5, 7) 90 Rear Clevis Unique Applications Sometimes Require Unique Cylinders See our custom design capabilities on page 87 SMS SMS4 SMS STROKE 3/32-8 NPT 2 + STROKE 2 /32 + STROKE.750 3/32 TYP. TYP x DP x DP. -20 x SQ TYP. 5/6-8 UNC THR'D. EQUAL SPACED ON B.C. (CLEARANCE FOR S.H.C.S.) 3 /8 2 5/6-8 UNC THR'D. EQUAL SPACED ON B.C. (CLEARANCE FOR S.H.C.S.) 3 /8 2 Series SMS Solid Stainless SS-00 St d Clevis Brk t Used on SMS 6 Series 300 Stainless 9/6 /6 SS-00T Trunnion Brk t Used on SMS 0, /32 2 PLC. 3/6 R Stainless steel THRU SMS SMS7 4/ I.D. 3 + STROKE 2/ x DP. 2 + STROKE /32 5/6-8 UNC THR'D. EQUAL SPACED ON B.C. (CLEARANCE FOR S.H.C.S.) 3 /8 2 5/6-8 UNC THR'D. 8 HOLES EQUAL SPACED ON B.C. (CLEARANCE FOR S.H.C.S.) R. /32 2 PLC. 3/6 THRU /6 / x DP. 3 /8 45

12 3 BORE SMS STAINLESS 200 PSI MAX. AIR 400 PSI MAX. HYD. Non shock SMS /8 + STROKE -8 NPT -8 NPT 7/8 7/8 5 5/6 + STROKE / UNF.748 PILOT.744 x /64 LG. 3-6 x DP. 7/8 3-6 x DP. Spring Return Cylinders Pneumatic only Springs add to cyl. length 0-2 stroke add extra 2-4 stroke add 3 extra over 4 stroke not available Spring force Fully extended 20# Fully compressed 75# Spring material Stainless steel Optional Male Rod Thread.000 SMS I.D. -8 NPT UNF.748 PILOT.744 x /64 LG. 7/8-6 UNF 2A 3 4 3/6 + STROKE 3-6 x DP. -2SS Nut Nose Mounting Nut Not included with cylinder Order Separately 2 SMS3-8 NPT -6 UNC THR'D. 3 7/8 + STROKE EQUAL SPACED ON 3.78 B.C. (CLEARANCE FOR 5/6 S.H.C.S.) UNF.748 PILOT.744 x /64 LG. 7/8 3-6 x DP. SMS-750 Rod Clevis and Nut 2 SMS NPT UNF.748 PILOT.744 x /64 LG. 7/8 SQ STANDARD CYLINDERS + CORROSION = LIABILITY AURORA STAINLESS + CORROSION = PEACE OF MIND -6 THREAD.752 SS-70 Clevis Pin Assembly Used on SMS

13 ALL AURORA PRODUCTS AVAILABLE FOR 24 HOUR DELIVERY SMS Options Shock Pads Viton Seals Non-lube Service Magnetic Piston U Cup Piston 90 Rear Clevis SSC-300 Clevis Brk t Used on SMS2, 6 Series 300 Stainless steel 3 3 3/6 + STROKE -8 NPT 2 7/8 + STROKE UNC THR'D. EQUAL SPACED ON 3.78 B.C. (CLEARANCE FOR 5/6 S.H.C.S.) 7/ x DP. SMS4-6 UNC THR'D. EQUAL SPACED ON 3.78 B.C. (CLEARANCE FOR 5/6 S.H.C.S.) 3/6 R..750 THRU /32 2 PLC. 2 STAINLESS CYLINDERS + STAINLESS ACCESSORIES NPT /8 7/ I.D. 2 7/8 + STROKE -8 NPT 4 5/6 + STROKE / NPT 7/ x DP. -6 UNC THR'D. EQUAL SPACED ON 3.78 B.C. (CLEARANCE FOR 5/6 S.H.C.S.) 7/8 4-6 UNC THR'D. 8 HOLES EQUAL SPACED ON 3.78 B.C. (CLEARANCE FOR 5/6 S.H.C.S.) 3 SMS5 3-6 x DP. SMS6 Series SMS Solid Stainless CORROSION -8 NPT.000 7/8 4 Help in Making the Best Choice -6 x DP. SMS7 Technical

14 ORDERING PROCEDURE - SMS Stainless Select code numbers/letters (bold type) from each of the six boxes below - then select options desired from the table below. List codes in the same sequence as shown. Bore Code Type Code Service Code /8" " 2" 3" Double acting Single acting spring return (Adds to cyl. length) Spring extend not available C A Pneumatic Hydraulic E G Mounting Style/Code SMS SMS 2 SMS 3 SMS 5 SMS 6 SMS 7 SMS 8 SMS 9 SMS 0 SMS SMS 4 SMS 5 SMS 6 SMS 7 Stroke Code is stroke in total /8" increments Example: " stroke = 8 2 " stroke = 8 Stocked in the following strokes: /8,,,,,,,,, 2 and " increments to 0" 3" bore - Limited to 8" max. stroke Piston Rod Codes Bore Thread Code x Male M /6-8 x Female 5/6-24 x Female F3 F4-20 x Male M8-6 x Female F5-24 x Female F x /8 Male M x Female F x Male M x Female F0 With non-rotate option enter code Option Description Code Extra rod extension " increments Shock pads Pneu. only to 80 F Double acting only Specify code letter J followed by extra length required as a two place decimal om the table Example: J.50 = " extra J.25 = "extra Add to either or both ends in /8", ", 2" bore up to 2" stroke. Over 2" stroke and on all 3" bore must be added to both ends Each pad adds " length Rod end only Cap end only Both ends Non-lube service Available on standard O ring Piston. Not available or necessary on U cup piston P Viton seals U cup piston Standard seals are nitrile and urethane +0 to +200 F For service 0 to +400 F specify viton Extends cycle life and reduces friction Piston is aluminum and includes teflon wear strip adds " to length Clevis 90 to std SMS 2, 6, only T Magnetic piston Adds " to length W Non rotate Available only on double acting SMS 7, 8, 9, 4, 5, 7 with male stud without male stud " oversize ports 2" bore only SMS, 2, 3, 6, 7, 8, 9, only Not available with option x,y Z J L M N R S X Y Part No. Example: bore Mounting style SMS9 stroke -20 x male thread 5 SMS9 C 2 E M8 R W Double acting Pneumatic Magnetic piston Viton seals 48

15 SMS Service Parts When ordering any repair part please provide the part number and description shown below along with the serial number and part number of the cylinder being serviced Key Description /8 Bore Bore 2 Bore 3 Bore Seal kits for cylinders with O ring piston Pneumatic, Nitrile Pneumatic, Viton Hydraulic, Nitrile Hydraulic, Viton Add suffix NL for Non-Lube Add suffix NL for Non-Lube SMS 34 SMS 34V SMS 35 SMS 35V SMS 345 SMS 345V SMS 355 SMS 355V SMS 3420 SMS 3420V SMS 3520 SMS 3520V SMS 3430 SMS 3430V SMS 3530 SMS 3530V Seal kits for cylinders with U cup piston includes Teflon wear strip Pneumatic, Nitrile Pneumatic, Viton Hydraulic, Nitrile Hydraulic, Viton Rear port cap 2 Rear pivot cap 2 90 Rear pivot cap Side port cap Rear flange cap Square cap Tube Piston rod assembly Spring guide Pair Spring Magnet Flange head Nose Mount Head Short square Head Long square Head Square non rotate head Trunnion head Non-rotate guide bushing Cap end shock pad Head end shock pad Add suffix 250 for 2" bore NPT Add suffix 250 for 2" bore NPT Add suffix 250 for 2" bore NPT Add suffix 250 for 2" bore NPT Add suffix 250 for 2" bore NPT SMS59 and SS325 supplied in pairs Add suffix NR for non-rotate Add suffix 250 for 2" bore, NPT Add suffix 250 for 2" bore, NPT Add suffix 250 for 2" bore, NPT Pair SMS 54 SMS 545 SMS 5420 SMS 5430 SMS 54V SMS 545V SMS 5420V SMS 5430V SMS 55 SMS 555 SMS 5520 SMS 5530 SMS 55V SMS 555V SMS 5520V SMS 5530V SMS 0 SMS 05 SMS 020 SMS 030 SMS SMS 5 SMS 20 SMS 30 SMS 90 SMS 590 SMS 2090 SMS 3090 SMS 48 SMS 485 SMS 4820 SMS 4830 SMS 3 SMS 35 SMS 320 SMS 330 SMS 46 SMS 465 SMS 4620 part No. is T followed by the complete cylinder part number SMS part 3 No. is PR followed by the complete cylinder part number SMS 2 SMS 25 SMS 220 SMS 230 SS 2 SS 25 SS 220 SS 220 SMS 59 SS 325 SS 3220 SS 3230 SMS 4 SMS 45 SMS 420 SMS 430 SMS 0 SMS 05 SMS 020 SMS 030 SMS 44 SMS 445 SMS 4420 SMS 45 SMS 455 SMS 4520 SMS 45NR SMS 455NR SMS 4520NR SMS 45T SMS 455T SMS 4520T SMS 5 SMS 5 SMS 5 Consult factory 3MSP CSP 5CSP 2CSP 3MSP Series SMS Solid Stainless 49

SMS Solid Stainless Cylinders

SMS Solid Stainless Cylinders SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of

More information

QUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless

QUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series

More information

Series SS Solid Stainless Cylinders

Series SS Solid Stainless Cylinders Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

* Screw clearance to allow bolt head to pass through - no counter bores

* Screw clearance to allow bolt head to pass through - no counter bores Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with

More information

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE

Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for

More information

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51

LP/LPM Series. Non-Lube Air Cylinder P1M. Tooling Plate P1M. Swing Clamp P1M. Contents E51 Non-Lube Air Cylinder P1G C05(S) LP(M) Swing Clamp Tooling Plate Contents Features...52 Ordering Information...53 Specifications...54 Basic Dimensions...55 Mounting Options...56 Spring Data...57 Rod Options...58

More information

Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER

Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.

More information

Flat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders

More information

Provenair Series AN Cylinders Parts List / Service Instructions

Provenair Series AN Cylinders Parts List / Service Instructions Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250

SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2 THRU 2 BORE SIZE MAXIMUM PSI 250 SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE

More information

HTR TIE-ROD CYLINDERS H I K M N TUBE OD

HTR TIE-ROD CYLINDERS H I K M N TUBE OD 1 Brand Cylinders LINE THE HTR Pressure Ratings: 2" - 4" Bore = 2500 PSI, 5" Bore = 2000 PSI BORE (INCH) B C D E F G = J 2.0 1.015 2.125 1.625 1.000 1.000 1.142 2.5 1.015 2.125 1.625 1.000 1.000 1.142

More information

FULL COLOR TAB #6 TC 105

FULL COLOR TAB #6 TC 105 FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty

More information

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501

More information

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)

SERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA) BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

STAINLESS STEEL CYLINDER CONSTRUCTION

STAINLESS STEEL CYLINDER CONSTRUCTION STAINLESS STEEL CYLINDER CONSTRUCTION In the early 950 s, Clippard introduced miniature pneumatic cylinders and valves to industry. No other manufacturer can boast of the same experience or knowledge of

More information

Heavy Duty Bench Top Presses

Heavy Duty Bench Top Presses Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown

More information

The friction free alternative

The friction free alternative Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.

More information

FULL COLOR TAB #12 BTP

FULL COLOR TAB #12 BTP FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage

More information

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414

More information

The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS!

The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! SERIES JHD HEAVY DUTY AIR CYLINDER The Lehigh Miracalube Air Cylinder The Only Real Self-Lube Air Cylinder in the World BENEFITS! The true test of a cylinder is how well it performs in your application.

More information

FULL COLOR TAB #16 TECHNICAL DATA

FULL COLOR TAB #16 TECHNICAL DATA FULL COLOR TAB #16 TECHNICAL DATA 276 General How Force Charts Weight Charts Seal Kits Conversion Charts TECHNICAL DATA How to determine the right cylinder size for the job. To determine what cylinder

More information

FA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8

FA SERIES KNIFE GATE PNEUMATIC CYLINDERS... 8 FA SERIES KNIFE GATE PNEUMATIC CYLINDERS......... 8 section 8 154 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Dimensional Information FA SERIES DIMENSIONS BASIC DIMENSIONS PLUS

More information

Actuator Products Compact Cylinders

Actuator Products Compact Cylinders Low profile design Flexible construction with special modification capability High density iron rod bearing provides maximum support for longer life Single and double acting versions available 6 mounting

More information

Series AM/MM/WM Mill Type Cylinders

Series AM/MM/WM Mill Type Cylinders ET AH To order this part, call Lifco Hydraulics USA Toll Free at -00-- S S ZE* SS* SW (TYP) FB THRU, () PLACES TE UF WA / EE P* ØE EE P* CD 00 M CW S Series AM/MM/WM Mill Type Cylinders Table of Contents

More information

SRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback

SRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical

More information

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16 or 3/8 Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated

More information

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic

More information

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C

Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE

More information

Compact Select Cylinders Inch Series.

Compact Select Cylinders Inch Series. Compact Select Cylinders Inch Series Table of Contents: Inch Series Inch Series, Options and ccessories Inch Series How to Order: Inch Series... pg. Forces, Pressure Ratings, Envelope Dimensions... pg.

More information

Original Line Original Line How to Order Introduction to Bimba Standard Air Three-Position Air with Adjustable Cushions MRS Non-Rotating Air PC Steel Non-Repairable Original Line Steel Repairable (Bell

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TECHNICAL DATA: FORCE CHART BORE STROKE

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TECHNICAL DATA: FORCE CHART BORE STROKE How to determine the right size Cylinder for the job TECHNICAL DATA To determine what size cylinder the task requires, you need to answer a few questions about three main points: load, velocity and air

More information

Table of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5

Table of Contents General Specifications, Available Mountings... 1 Introduction... 2 Application Examples... 3 Features... 4 Theory of Operation... 5 With Continuous Position Feedback Catalog AU08-0971/NA September, 2002! Compact Design! Highly Accurate Position Feedback Capability! Electronic Controllers Available! 5 Bore Sizes Table of Contents General

More information

RP SERIES 200 psi Mill-type Cylinder

RP SERIES 200 psi Mill-type Cylinder Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20

More information

RL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to

RL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to RL-G70 PARTS LIST # 102693I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to For older hoists use the following: Parts List No. 102692H for Serial Number 2485 to 6596 IF YOUR HOIST DOES NOT FALL WITHIN

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

Original & T Series 8 Bores, 1/2" 4" Features & Benefits General, Standard Specifications

Original & T Series 8 Bores, 1/2 4 Features & Benefits General, Standard Specifications Original & T Series 8 Bores, /2" 4" Section Index Features & Benefits....2 General, Standard Specifications....2 Page Construction Details....3,.4 How a Pancake is built Information....5,.6 How a Pancake

More information

Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders

Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................

More information

SAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories

SAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified

More information

Double-Wall Cylinders/Repairable Stainless Steel Cylinders

Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders/Repairable Stainless Steel Cylinders Double-Wall Cylinders 6.3-6.15 Repairable Stainless Steel Cylinders 6.16-6.24 DW/RSS Cylinders Bimba Double-Wall Cylinders The Bimba Double-Wall

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1 NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need

More information

PURAKAL SERIES 100 TABLE OF CONTENTS

PURAKAL SERIES 100 TABLE OF CONTENTS TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................

More information

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available. AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors

More information

DIMENSIONS & MOUNTS. NOTE: For Spring Return and Fail safe options, double the stroke when calculating overall dimensions HEAD NUT (SSSM-114)

DIMENSIONS & MOUNTS. NOTE: For Spring Return and Fail safe options, double the stroke when calculating overall dimensions HEAD NUT (SSSM-114) STAINLESS STEEL SMALL BORE CYLINDERS SSSM (All Stainless Steel). Available in 1-1/8 bore only. MODEL REAR PORTED - NO TANG Model SSSM (All Stainless Steel). Available in 1-1/8 (28mm) bore only. Pressure

More information

KRONES DIRECT REPLACEMENTS

KRONES DIRECT REPLACEMENTS PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE

More information

LF90C thru current printed 7/19/2012 Page 1 of 5

LF90C thru current printed 7/19/2012 Page 1 of 5 Drill Serial Number Range: LF90C 2011 001 thru current For Drill Build: DRILL MODULE, LF90C (3549226 Rev: D) Document Number: 5400780 Rev. A Effective Date: 1 Jan 2011 KIT SUMMARY 1 102629 KIT, BASE FRAME

More information

SERIES BCZ2D NOZZLE CYLINDER START-UP AND INFORMATION SHEET

SERIES BCZ2D NOZZLE CYLINDER START-UP AND INFORMATION SHEET Model Number Definition SERIES BCZD NOZZLE CYLINDER START-UP AND INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with cylinder installation, setup and repair.

More information

Drill Serial Number Range: LF90C thru current

Drill Serial Number Range: LF90C thru current Drill Serial Number Range: LF90C- 2011-001 thru current For Drill Build: DRILL MODULE, LF90C (3549226 Rev: D) Document Number: 5400780 Rev. B Effective Date: 1- Jan- 2011 KIT SUMMARY 1 102629 KIT, BASE

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16" to 2" bore Double acting pneumatic actuators

RPD Series Delrin End Cap Roundline Plus Stainless Steel Body Actuators 9/16 to 2 bore Double acting pneumatic actuators RP Series elrin nd ap Roundline Plus Stainless Steel Body ctuators 9/6" to 2" bore ouble acting pneumatic actuators elrin cetal Resin end cap cylinders for washdown, and corrosive environment application

More information

Flat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power)

Flat SquareFlat Flat SquareFlat FO2, FO3, FO4(multiple power) Flat Cylinders Flat-1 2.3-2.11 SquareFlat-1 2.12-2.18 Flat-11 2.19-2.23 SquareFlat-11 2.24-2.28 FO2, FO3, FO4(multiple power) 2.29-2.34 FOP(multiple position) 2.35-2.41 Flat Accessories 2.42-2.43 EF1 Cylinders

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE) Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with

More information

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING

More information

ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES

ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)

More information

Catalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders

Catalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders Catalog PN- Prices effective September 1, 011 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders 5-8-10 Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

Original Line Cylinders

Original Line Cylinders How to Order Introduction to Bimba Standard Air.3.4-.9.0-.65 Three-Position.66-.67 Air with Adjustable Cushions.68-.75 MRS.76-.86 Non-Rotating Air.87-.97 PC.98-.03 All Stainless Steel Repairable (Bell

More information

Bimba Original Line - Stainless Steel Body Air Cylinders

Bimba Original Line - Stainless Steel Body Air Cylinders Bimba Original Line - Stainless Steel Body Air Cylinders How to Order The model number of all Original Line cylinders consists of three alphanumeric clusters. These designate product type, bore size and

More information

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

250 psi rating. series. pneumatic cylinders. bulletin 0606ST. 20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

SERIES BCS STRETCH ROD CYLINDERS

SERIES BCS STRETCH ROD CYLINDERS BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH

More information

Angular and Parallel Grippers

Angular and Parallel Grippers CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...

More information

RL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to

RL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN

More information

Original Line Cylinders

Original Line Cylinders How to Order Introduction to Bimba 1.3 1.4-1.9 Standard Air 1.10-1.66 Three-Position 1.67-1.68 Air with Adjustable Cushions 1.69-1.76 MRS 1.77-1.87 Non-Rotating Air 1.88-1.98 PC 1.99-1.104 Steel Non-Repairable

More information

Port Flow Rate/ Function Series Actuators Page Number Size Factor

Port Flow Rate/ Function Series Actuators Page Number Size Factor Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6

More information

SERIES PA SWING ARM CLAMPS for the Automotive Industry

SERIES PA SWING ARM CLAMPS for the Automotive Industry Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:

More information

Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual

Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...

More information

Table of Contents Tiny Titan Series Features and Benefits How to Order Optional Features

Table of Contents Tiny Titan Series Features and Benefits How to Order Optional Features Table of Contents Tiny Titan Series. 3-22 Features and Benefits.................. 3 How to Order......................... 4 Optional Features..................... 5 Basic and Front Flange Mounts..........

More information

Features. Machine Screw Actuators Stainless Steel. Must be bolted to lifted member to prevent rotation, except when keyed.

Features. Machine Screw Actuators Stainless Steel. Must be bolted to lifted member to prevent rotation, except when keyed. Top Plate - 316 S.S. Must be bolted to lifted member to prevent rotation, except when keyed. Machine Screw Actuators Lifting Screw - 316 S.S. Also available as threaded end or clevis end. Carbon Steel

More information

Duty Types and Forces

Duty Types and Forces Types and Forces Threaded Body Metric Cylinders cting Compact Cylinders, End s: mm, mm, and mm Threaded Body Metric Cylinders TB series cylinders are single acting. Their single port is located at the

More information

Four Shaft Linear Thrusters

Four Shaft Linear Thrusters Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust

More information

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI

A SERIES. Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI A SERIES Heavy-Duty Pneumatic Cylinders Pressure Rating 250 PSI 1, 2, 6, 43 Heads, Caps, Retainers, Mountings The heads, retainers, and mountings, are machined from steel. The trunnion head, flanges and

More information

RL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to

RL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN

More information

Cylinders Small Bore Tie Rod

Cylinders Small Bore Tie Rod Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:

More information

Cylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi

Cylinders. Series TQ Agricultural Cylinders. Vickers. Nominal Pressure: 2500 psi Vickers Cylinders Series TQ Agricultural Cylinders Nominal Pressure: 500 psi Released 10 91 113A Series TQ Hydraulic Cylinders Designed for Agricultural Applications Features Working pressure to 500 psi

More information

TR-1 Gold Cylinder and Bracket Mounting Instructions

TR-1 Gold Cylinder and Bracket Mounting Instructions TR-1 Gold Cylinder and Bracket Mounting Instructions OMC 8 HP. 2 & 4 Stroke: 1993-2002 Page 1 PN 906-1000-00 Parts: Cylinder Bracket Kit PN 120-1000-01 ITEM PART No QTY. NAME 3 330-1003-00 1 Pin, Stern

More information

HYDROSTATIC TEST SYSTEM MANUAL

HYDROSTATIC TEST SYSTEM MANUAL PDQC HYDROSTATIC TEST SYSTEM MANUAL Technical Specification Operating Instructions Part List Revised 12-2016 Manual # PDQC- 6,000 And PDQC-10,000 1 PDQC PERFORMANCE DATA Model Number Maximum Pressure Volume

More information

HP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT 60 PSI

HP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT 60 PSI ISO 9001 REGISTERED HP5 BULL PIN FOR FRAME LINE APPLICATIONS 754 LBF RETRACT FORCE @ 60 PSI RETRACTING LOCATING PIN WITH A 2KG SLIDE HAMMER PISTON. RAP ACTION* PROVIDES CONCENTRATED PULLING POWER. A GREATER

More information

FULL COLOR TAB #11 IT AB121

FULL COLOR TAB #11 IT AB121 FULL COLOR TAB #11 IT AB121 208 AB121 Air SERIES: AUTO RECIPROCATING AIR BOOSTER Model Numbers: AB121 & AB221 This 2:1 ratio air-to-air booster is compact and self-contained. Unit incorporates integral

More information

P1E Series ISO Cylinders

P1E Series ISO Cylinders High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane

More information

Rotary Vane Actuators

Rotary Vane Actuators Rotary Vane Actuators Rotary Vane Actuators Unitized Body Turn-Act s patented extrusion combines tube, stator and bolt lobes into a one-piece unitized body. Unique design provides torsional rigidity allowing

More information

ML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications

ML SERIES. Double-Acting Hydraulic Valve Actuator. Thrusts up to 1,500,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications Actuation Solutions and Systems for the World s Most Challenging nvironments ML SRIS Double-Acting Hydraulic Valve Actuator Designed & ngineered for Severe-Service Applications Thrusts up to 1,500,000

More information

Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space

Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space Non-Rotating Elliptical Piston Cylinders, Type DZH Features and Benefits Slim, Flat, Elliptical Piston DZH Cylinders Provide Non-rotating Linear Actuation in up to 50% Less Space Patented elliptical piston/seal

More information

A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves

A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies

4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies 4050A Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials

More information

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications

A SERIES. Double-Acting. Pneumatic Valve Actuator TECHNICAL BROCHURE. Designed & engineered for severe-service applications A SRIS Double-Acting Pneumatic Valve Actuator Designed & engineered for severe-service applications Service and support www.cowandynamics.com A SRIS Design & Materials Barrel Seals Nitrile O -ring standard.

More information

AIR-MITE AIR-MITE DEVICES, INC W. MONTROSE AVENUE CHICAGO, ILLINOIS PHONE: 773/ FAX: 773/

AIR-MITE AIR-MITE DEVICES, INC W. MONTROSE AVENUE CHICAGO, ILLINOIS PHONE: 773/ FAX: 773/ CATALOG NO. 97 PNEUMATIC AUTO M ATION COMPONENTS AIR-MITE 4739 W. MONTROSE AVENUE CHICAGO, ILLINOIS 60641 PHONE: 773/286-3393 FAX: 773/286-4703 introduction Air Power, the harnessed servant of industrial

More information