Piston Accumulators Series Catalog HY /US Page

Transcription

1 Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard Seal Options to Handle a Variety of Fluids and Temperatures SME ertification and E Marking vailable 50 Parker Hannifin orporation ccumulator ivision

2 Page Specifications Materials Shell high strength alloy steel aps steel Pistons aluminum (2" thru 7"), ductile iron (9") Gas Valve artridge steel Gas Valve Protector steel Piston Glide Rings PTFE Piston & End Seals various polymers Piston Seal ackups PTFE Series 5000 Gas Valve Series 5000 accumulators and gas bottles with 2 through 6 bores are supplied with a high pressure cored gas valve as standard. Models with 7 and 9 bores are supplied with a heavy duty (military) poppet-type gas valve cartridge (Mil. Spec. MS ) as standard. Gas Valve with ore (2-6 ores) Military Style (MS) Gas Valve (7-9 ores) ctual ore Sizes & Maximum Flow Rates Pressure Ratings Nominal ctual ore Size Max. Recommended Flow* ore Size (in.) (in.) (mm) GPM LPM *Note: ased on 120 in/sec maximum piston speed, port & fitting size will become limiting factors for most applications. Series 5000 piston accumulators are rated at minimum 4 to 1 design factors. For pressures over 5000 psi, consult the factory. Fluids Parker s piston accumulators are compatible with a wide variety of fluids. Standard accumulators (with nitrile seals) may be used with petroleum-based industrial oils or water-based flame resistant fluids. Optional seals compatible with most industrial fluids are available with temperature ranges from -45 F to 325 F (-43 to 162 ). Precharge Units are shipped with a nominal nitrogen precharge as standard. For specific precharge pressures, specify at the time of order. Standard s The following ports are supplied as standard on all fluid ends and on the gas end of accumulators ordered for use with gas bottles: Standard s ore Metric Models Size Standard Models SPP (in) 2 SE #12 3/4 3 SE #12 3/4 4 SE # SE # ode 62 Flange 2 Metric ISO 6162 Flange 9 2 ode 62 Flange 2 Metric ISO6162 Flange #5 SE THRE 1/2 20 UNF-2 vailable Options If your application requires a piston accumulator, gas bottle, or special option that falls outside of Parker s broad offering, consult your local distributor, Parker representative, or the factory with your specific requirements. Parker has the manufacturing and engineering expertise to design and build piston accumulators to your exacting requirements, from simple modifications of standard units to complete designs. Some example of Parker s past special designs include: Special and Stainless Steel Materials Piston Position and Velocity Sensors and Switches Special Seals Non-Standard apacities Water Service s Fixed Gauge Mounts Fuse Plug ssemblies 1/2 20 UNF-2 Note: The standard Parker gas cap will accept either style gas valve. uxiliary Gas ottles When space does not permit the installation of the required piston accumulator, a smaller accumulator may be used by connecting it to an auxiliary gas bottle(s) that can be located in a nearby spot where space is available. In some cases, a piston accumulator and gas bottle combination may be more economical, especially large capacity sizes. Piston travel, confined to the accumulator, must be calculated with ample margins to store the required fluid. 51 Parker Hannifin orporation ccumulator ivision

3 Page Models, apacities & imensions Series 5000 Small ore 5000 PSI for Oil and Water Service G epth ored Gas Valve Threaded F ia. olt ircle Flanged Model No. Fluid Gas - Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 2N00051K N00101K N00151K / /4 8 2N00291K 1 Pint N00581K 1 Quart N00291K 1 Pint N00581K 1 Quart N00901K 1.5 Liter / /4 3/ N01161K 1/2 Gal N01831K 3 Liter N00581K 1 Quart N01161K 1/2 Gal N02311K 1 Gal / / N03471K 1-1/2 Gal N05781K 2-1/2 Gal N02311K 1 Gal N03471K 1-1/2 Gal N05781K 2-1/2 Gal N09241K 4 Gal / / N11551K 5 Gal N17331K 7-1/2 Gal N23101K 10 Gal Notes: 1) For Water Service add W after construction code, see How to Order. 2) See Options for complete listing of port options. 3) SME certified and E marked accumulators and gas bottles available. 52 Parker Hannifin orporation ccumulator ivision

4 Page Models, apacities & imensions Series 5000 Small ore 5000 PSI for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid Gas (oth Ends) ccumulator Volume Volume S Tube E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00583KTETE 1 Quart N01163KTETE 1/2 Gal N02313KTETE 1 Gal / / N03473KTETE 1-1/2 Gal N05783KTETE 2-1/2 Gal N02313KTETE 1 Gal N03473KTETE 1-1/2 Gal N05783KTETE 2-1/2 Gal N09243KTETE 4 Gal / / N11553KTETE 5 Gal N17333KTETE 7-1/2 Gal N23103KTETE 10 Gal PSI uxiliary Gas ottles G epth ored Gas Valve Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual S Tube E F G Weight ottle (gal) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00581K 1 Quart N01161K 1/2 Gal N02311K 1 Gal / / N03471K 1-1/2 Gal N05781K 2-1/2 Gal N02311K 1 Gal N03471K 1-1/2 Gal N05781K 2-1/2 Gal N09421K 4 Gal / / N11551K 5 Gal N17331K 7-1/2 Gal N23101K 10 Gal Parker Hannifin orporation ccumulator ivision

5 Page Models, apacities & imensions Series 5000 Small ore 345 ar Metric for Oil and Water Service G epth ored Gas Valve Threaded F ia. olt ircle Flanged Model No. Fluid - Gas Volume Oil Volume SPP/G SE E F G Weight Service (Liters) (cu in) (Liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 2N00052K N00102K N00152K / N00292K N00582K N00292K N00582K N00902K /4 M N01162K N01832K N00582K N01162K N02312K M N03472K N05782K N02312K N03472K N05782K N09242K M N11552K N17332K N23102K Notes: 1) For Water Service add W after construction code, see How to Order. 2) See Options for a complete listing of port options. 3) SME certified and E marked accumulators and gas bottles are available. 54 Parker Hannifin orporation ccumulator ivision

6 Page Models, apacities & imensions Series 5000 Small ore 345 ar Metric for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid - (oth Ends) Gas ccumulator Volume Volume SPP/G SE E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582KRR N01162KRR N02312KRR M N03472KRR N05782KRR N02312KRR N03472KRR N05782KRR N09242KRR M N11552KRR N17332KRR N23102KRR ar Metric uxiliary Gas ottles G epth ored Gas Valve Threaded F ia. olt ircle Flange Model No. Gas Volume - Gas Nominal ctual SPP/G SE E F G Weight ottle (liters) (liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582K N01162K N02312K M N03472K N05782K N02312K N03472K N05782K N09242K M N11552K N17332K N23102K Parker Hannifin orporation ccumulator ivision

7 Page Models, apacities & imensions Series 5000 Large ore 5000 PSI for Oil and Water Service G epth MS Gas Valve Threaded F ia. olt ircle Flange Fluid Gas Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) (in) (in) (in) (in) (lbs) 7K11551K 5 Gal K17331K 7-1/2 Gal " SE ode K23101K 10 Gal ± Flange 2 5/ K34651K 15 Gal K23101K 10 Gal K34651K 15 Gal K46201K 20 Gal " SE ode 62 3/ K57751K 25 Gal ± Flange K69301K 30 Gal Notes: 1) For Water Service add W after construction code, see How to Order. 2) See Options for a complete listing of port options. 3) SME certified and E marked accumulators and gas bottles are available. The Minimum esign Metal Temperature (MMT) for SME certified piston accumulators presented in this section is 20 F (-7 ). 56 Parker Hannifin orporation ccumulator ivision

8 Page Models, apacities & imensions Series 5000 Large ore 5000 PSI for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid Gas ccumulator Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) (oth Ends) (in) (in) (in) (lbs) 7K11553KPQPQ 5 Gal K17333KPQPQ 7-1/2 Gal K23103KPQPQ 10 Gal ± SE ode 62 5/ K34653KPQPQ 15 Gal K23103KPQPQ 10 Gal K34653KPQPQ 15 Gal K46203KPQPQ 20 Gal SE ode 62 3/ K57753KPQPQ 25 Gal ± K69303KPQPQ 30 Gal PSI uxiliary Gas ottles G epth MS Gas Valve Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual E F G Weight ottle (gal) (cu in) (in) (in) (in) s (in) (in) (in) (lbs) 7K11551K 5 Gal K17331K 7-1/2 Gal K23101K 10 Gal ± SE ode 62 5/ K34651K 15 Gal K23101K 10 Gal K34651K 15 Gal K46201K 20 Gal SE ode 62 3/ K57751K 25 Gal ± K69301K 30 Gal Parker Hannifin orporation ccumulator ivision

9 Page Models, apacities & imensions Series 5000 Large ore 345 ar Metric for Oil and Water Service G epth MS Gas Valve Threaded F ia. olt ircle Flange Fluid Gas Volume Volume E F G Weight Model No. (Liters) (cu in) (liters) (mm) (mm) (mm) (mm) (mm) (mm) (kg) 7K11552K K17332K " Metric 226 7K23102K ± SE ode 62 Flange 2 M K34652K K23102K K34652K Metric 483 9K46202K SE ode 62 M K57752K ± Flange K69302K Notes: 1) For Water Service add W after construction code, see How to Order. 2) See Options for a complete listing of port options. 3) SME certified and E marked accumulators and gas bottles are available. 58 Parker Hannifin orporation ccumulator ivision

10 Page Models, apacities & imensions Series 5000 Large ore 345 ar Metric for Use with Gas ottles Typical oth Ends G epth Gas Threaded F ia. olt ircle Flange Fluid Gas ccumulator Volume Volume E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) (oth Ends) (mm) (mm) (mm) (kg) 7K11552KMQMQ K17332KMQMQ Metric 226 7K23102KMQMQ ± SE ode 62 Flange 2 M K34652KMQMQ K23102KMQMQ K34652KMQMQ Metric 483 9K46202KMQMQ SE ode 62 M K57752KMQMQ ± Flange K69302KMQMQ ar Metric uxiliary Gas ottles G epth MS Gas Valve Threaded F ia. olt ircle Flange Model No. Gas Volume Gas Nominal ctual E F G Weight ottle (Liters) (Liters) (mm) (mm) (mm) s (mm) (mm) (mm) (kg) 7K11552K K17332K Metric 222 7K23102K ± SE ode 62 Flange 2 M K34652K K23102K K34652K Metric 461 9K46202K SE ode 62 M K57752K ± Flange K69302K Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 60 for complete listing of port options. 59 Parker Hannifin orporation ccumulator ivision

11 Page Options Series 5000 Optional s The following ports are available as options on all piston accumulators. SE Straight Thd. ode 62 Flange NPT SPP ISO Min. ode Min. Min. Min. Min. Size ode ore Size Inch Metric ore Size ode ore Size ode ore Size ode ore #5 T 2" 1" PG MG 4" 3/8" UT 2" 3/8" R 2" M14 Y 2" #6 T 2" 1¼" PH MH 4" 1/2" UU 2" 1/2" R 2" M18 Y 2" #8 T 2" 1½" PP MV 6" 3/4" UV 2" 3/4" R 2" M22 Y 2" #10 TI 2" 2" PQ MQ 6" 1" UW 3" 1" R 3" M27 Y 2" #12 T 2" 2½" PR 7" 1¼" UX 3" 1¼" RE 3" M33 YE 3" #16 TE 3" 3 PS 9 1½" UY 4" 1½" RF 4" M42 YF 3" 2 UZ 4 2 RG 4 Notes: 1) 1" thru 2" flanges are to standard SE ode 62 dimensions, 2-1/2" to Socket Weld Flange dapter Pattern, dimensions are shown below. Metric pattern supplied on 345 ar Metric units unless otherwise specified. 2) SPT and Metric ports available, consult factory. SE 4-olt Flange imensions ode 62 (ISO 6162) (thru 2" diameter) 6000 PSI (410 ar) Flange Size SE Flange imensions (in.) Metric SE Flange imensions (mm) in mm F G F G 1½" 38 5/ ½ M " 50 3/ M ½" 7/ ½ F (4 places) x G Min. epth Seal Material **Recommended Maximum Seal Operating Temperature with General pplication ode Polymer Temperature Range Reduced Life and ompatibility* K una -20 F to 165 F 200 F Parker's Standard ompound ompatible Nitrile -29 to with most mineral oil-based fluids E Fluorocarbon -10 F to 250 F 400 F ompatible with most mineral oil-based fluids at Elastomer -23 to higher temperatures and some exotic fluids Ethylene -40 F to 250 F 300 F ompatible with most phosphate ester fluids Propylene -40 to and some synthetic fluids H Hydrogenated -45 F to 325 F 350 F ompatible with most oil-based and biodegradable fluids, Nitrile -43 to maintains sealing effectiveness at a wide range of temperatures Q Low Temp. -45 F to 185 F 200 F ompatible with most mineral oil-based fluids and Nitrile -43 to maintains sealing effectiveness at low temperatures * Note: onsult local distributor or factory for fluid compatibility information. Temperature ranges may vary depending upon fluid used in hydraulic system. ** The temperature listed indicates the operating temperature range of the seals, not the accumulator. For the Minimum esign Metal Temperature (MMT) of SME certified accumulators, refer to page Parker Hannifin orporation ccumulator ivision

12 Page Options & Parts Series 5000 Water Service Option (W) Piston accumulators are available for use with water as the fluid media. Modifications include electroless nickel plating all surfaces and metal parts. Optional Military Style Gas Valve (M) 2 thru 6 ore Sizes heavy duty (military style) poppet-type gas valve cartridge (Mil. Spec. MS ) is available as an option (M) specify when ordering. Military Style (MS) Gas Valve Note: This valve is standard on 7 and 9 bore sizes. 1/2 20 UNF-2 Safety Fuse Options (F) Safety Fuses are used as a safety device on accumulators and gas bottles to prevent over-pressurization of gas due to external heat or hydraulic pressure (set at 140% of maximum system pressure to avoid rupture disk fatigue and premature failure). The rupture disks are calibrated to rupture at a pre-determined pressure. Safety fuses are available on most sizes of piston accumulators. Safety fuses can be installed on all piston accumulators by using a fuse adapter. 4" bore units and above can be equipped with a fuse port machined in the gas cap by specifying the Safety Fuse Option (F) at the time of order in the model code, see How to Order. The safety fuse assembly and/or fuse adapter must be ordered separately Fuse #8 SE 3/4-16 UNF #8 SE Straight Th d #5 SE Straight Th d escription Part Number Safety Fuse ssembly xxxx Replacement Rupture isks xxxx Fuse dapter ) ssembly includes housing and rupture disk, xxxx = pressure setting in 100 psi increments, i.e., for an assembly with a 2000 PSI setting, order P/N Fuse dapter #5 SE Straight Th d 61 Parker Hannifin orporation ccumulator ivision

13 Page Parts Series 5000 Parts List ccumulators Item Part escription 1 ody 2 ap 3 Gas ap 4 Piston 5 V-O-Ring 5 V-O-Ring ack-up Washers 6 PTFE Ring (Piston) 7 O-Ring 7 O-Ring ack-up Washer 8 Gas Valve 8 Gas Valve O-Ring 9 Gas Valve Guard 9 Screw 5000 PSI Seal Kit Numbers (Includes items 5, 5, 6, 7, 7, 8) Material ore Size 2" 3 4" 6" 7" 9" una-nitrile (Std.) RK0200K000 RK0300K000 RK0400K000 RK0600K000 RK0700K000 RK0900K000 Fluorocarbon RK0200E000 RK0300E000 RK0400E000 RK0600E000 RK0700E000 RK0900E000 EPR RK RK RK RK RK RK Hydrogenated Nitrile RK0200H000 RK0300H000 RK0400H000 RK0600H000 RK0700H000 onsult Factory Low Temp Nitrile RK0200Q000 RK0300Q000 RK0400Q000 RK0600Q000 RK0700Q000 RK0900Q000 Mounting, harging & Gauging ccessories Parker offers a wide variety of mounting, charging and gauging accessories. See ccumulator ccessories. Special Options If your application requires a piston accumulator, gas bottle, or special option that falls outside of Parker s broad offering, consult your local distributor, Parker representative, or the factory with your specific requirements. Parker has the manufacturing and engineering expertise to design and build piston accumulators to your exacting requirements, from simple modifications of standard units to complete designs. Some example of Parker s past special designs include: Special and Stainless Steel Materials Piston Position and Velocity Sensors and Switches Special Seals Non-Standard apacities Tie Rod onstruction Special ertifications Spring & Weight Loaded onsult the experts at Parker with your next piston accumulator requirement! 62 Parker Hannifin orporation ccumulator ivision

14 Page Ordering Information Series 5000 How to Order Series 5000 Piston accumulators and gas bottles can be specified by using the symbols in the chart below to develop a model number. Select only those symbols that represent the features desired, and place them in the sequence indicated by the example at the top of the chart. Nominal ore Type of esign esign Seal Hyd. Gas Series Size onstruction Options apacity Pressure Number ompound Modification Modification 7 K K Series ccumulator Gas ottle Nominal ore Size 2 2 inches 3 3 inches 4 4 inches 6 6 inches 7 7 inches 9 9 inches N K L E Type of onstruction Threaded both ends non-sme mat l standard on 2, 3, 4, 6 Threaded both ends.s.m.e. mat l standard on 7 & up Same as K with.s.m.e. approval stamp 7 & up. vailable as special on smaller sizes Threaded both ends, E marked (1 liter and above) or SEP marked (under 1 liter) ore Size/apacity cu. in. (0.08 liters) cu. in. (0.16 liters) cu. in. (0.25 liters) cu. in. (0.48 liters) cu. in. (0.95 liters) cu. in. (0.48 liters) cu. in. (0.95 liters) cu. in. (1.47 liters) cu. in. (1.90 liters) cu. in. (3.00 liters) cu. in. (0.95 liters) cu. in. (1.90 liters) gal. (3.79 liters) ½ gal. (5.69 liters) ½ gal. (9.47 liters) gal. (3.79 liters) ½ gal. (5.69 liters) ½ gal. (9.47 liters) gal. (15.1 liters) gal. ( 18.9 liters) ½ gal. (28.4 liters) gal. (37.9 liters) gal. (18.9 liters) ½ gal. (28.4 liters) gal. (37.9 liters) gal. (56.8 liters) gal. (37.9 liters) gal. (56.8 liters) gal. (75.8 liters) gal. (94.6 liters) gal. (114 liters) onsult factory for other available sizes. and Gas Modifications esignated by 2 igits 1st 2nd Min. igit Style igit escription ore Size lank Std. lank Std. T SE SE #5 (1/2-20) 2 Straight SE #6 (9/16-18) 2 Thread SE #8 (3/4-16) 2 s SE #12 (1 1/16-12) 2 E SE #16 (1 5/16-12) 3 F SE #20 (1 5/8-12) 3 G SE #24 (1 7/8-12) 4 H SE #32 (2 1/2-12) 7 I SE #10 (7/8-14) PSI (ode 62) Min. ore P Flange F 3/4 4 ode 62 G 1 4 H 1 1/4 4 M Metric P 1 1/2 6 Flange Q 2 6 per R* 2 1/2 7 ISO 6162 S* 3 9 * For socket weld flange. Not available with metric flange. T 3/8 2 U NPTF U 1/2 2 (Not V 3/4 2 Recommended) W 1 2 X 1 1/4 2 Y 1 1/2 4 Z 2 4 SPP/SPT Metric/ISO R SPP 3/8-19 M14 x 1.5 Parallel 1/2-14 M18 x 1.5 SPT 3/4-14 M22 x 1.5 Taper 1-11 M27 x 2 G Metric E 1 1/4-11 E M33 x 2 Y ISO F 1 1/2-11 F M42 x G 2-11 G M48 x 2 Options lank Standard Gas ap W Water Service F SE Fuse * G SE Fuse *, Water Service M MS Gas Valve L MS Gas Valve, Water Service P Fuse * and MS R Fuse * and MS , Water Service * Safety fuse assembly not included. Order fuse assembly separately. H esign Pressure 5000 PSI 350 ar (E marked only) esign Number 1 Standard s 2 Metric Mounting Holes & Hyd. (SPP/Metric Flange Standard) Specify Optional s 3 Optional (Hyd. or Gas, See Modifications Table) *** Special esign Example of Optional ccumulator 4 N K T U V Non-std. Standard s vailable (See Modifications Table if Using Other Than Standard s Shown elow) ore Standard Metric (SPP) Size s s 2 SE #12 3/4 3 SE #12 3/4 4 SE # SE # ode 62 Flange 2 ISO6162 Flange 9 2 ode 62 Flange 2 ISO6162 Flange SE #8 Hyd. Seal ompound (See atalog for Temperature Settings) K una Nitrile (Std) E Fluoroelastomer EPR H Hydrogenated Nitrile Q S NPT 3/4 Gas Low Temp. Special (to be specified) 63 Parker Hannifin orporation ccumulator ivision

15 Page Notes Series Parker Hannifin orporation ccumulator ivision