Flow Controls & Accessories

Size: px
Start display at page:

Download "Flow Controls & Accessories"

Transcription

1 Flow ontrols & ccessories Section Flow ontrol Valves SPF Series Series Series Right ngle Series Needle Valves SPN Series Series...11 SP Series heck Valve & 3047 Series heck Valve...13 EM Series Exhaust Mufflers...14 reather Vents...15 ES Series Silencer...15 SN ir Line Silencer...16 Muffler-Reclassifier ES...17 utomatic rip Leg rain...18 Relief Valves...18 Quick Exhaust & Shuttle Valves Englewood, olorado

2 atalog 9W-J-261 Flow ontrol Valves Flow ontrols & ccessories SPF Series 1/8" to 1/2" Ports omponent Materials ody Material: rass Needle: Stainless Steel all heck: Stainless Steel heck Retainer: cetal Needle Seals: Nitrile (Standard), Fluorocarbon (Optional) Knob: luminum E F (Open) (oth Ends) General Information The SPF Series Flow ontrol Valves meter flow of air or oil in one direction and allow free flow in the reverse direction. SPF Series valves are manufactured with a two step needle. Fine metering is accomplished over the initial adjustment turns and nominal metering is provided over the remaining turns. Once the desired flow is selected, a set screw can be tightened to maintain the setting. These valves are available with NPTF ports in 1/8", 1/4", 3/8", and 1/2" sizes PSI Non-Shock racking pressure for return check poppet 5 PSI Nominal Standard: 0 to 140 F* -40 to 140 F (Hydraulic service) Extended Temperature: 0 to 400 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Model Selection and imensions Model Number Port Size E F SPF200 1/8-27 NPTF SPF400 1/4-18 NPTF SPF600 3/8-18 NPTF SPF800 1/2-14 NPTF For units with Fluorocarbon seals, add suffix V. Example: SPF200V Performance ata - Flow ontrolled Flow Free Flow Needle Full Open/heck losed Needle Full Open Model Flow - SFM Effective Flow - SFM Effective 100 PSI v 100 PSI v rea Full P Sq. Inches Full P Sq. Inches SPF SPF SPF SPF Englewood, olorado

3 atalog 9W-J-261 Micrometer Flow ontrol Valves Flow ontrols & ccessories 337 Series 1/8" to 3/4" Ports ody Material: rass Needle: Stainless Steel heck Seal: Urethane Needle Seals: una N (Fluorocarbon optional consult factory) Model Selection and imensions 1 I omponent Materials H1 - OPEN H2 - LOSE Knob: luminum Spring: Stainless Steel Retainer: Zinc- Plated Steel Set Screw: Steel General Information The 337 Series Flow ontrol Valves meter flow of air in one direction and allow free flow in the reverse direction. The 337 Series valves are manufactured with a fine tapered needle providing precise flow control, even at low flow rates. The perimeter of the adjustment knob features numerical micrometer position markings providing a visual indication of the setting. Once the desired flow is selected, a set screw can be tightened to maintain the setting. These valves are available with NPTF ports in 1/8", 1/4", 3/8", 1/2", and 3/4" sizes. This series is recommended for pneumatic service. 250 PSI racking pressure for return check poppet 1 to 2 PSIG Standard: 0 to 180 F* Extended Temperature: 0 to 300 F* (consult factory) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Port Flow (SFM ) imensions Service Size Model dj. Free Flow H1 H2 Kit 1/8" /16" /4" /16" /8" /8" /2" /16" /4" /8" t 100 PSIG inlet pressure with full pressure drop. Mounting racket Model Selection and imensions Port Size Mounting imensions racket Model No. E F G 1/8" /4" /8" /2" /4" Mounting racket 1 1 ia. G ia. (2 Holes) E F 0 9 * 3/32" maximum panel thickness * 3 Englewood, olorado

4 atalog 9W-J-261 (Revised 03/21/05) Flow ontrol Valves Flow ontrols & ccessories 3250 Series 1/8" to 3/4" Ports pplication The 3250 Series Flow ontrol Valves are specifically designed to accurately meter the flow of air in one direction and allow free flow in the opposite direction. The 3250 Series Flow ontrol Valves are also suitable for low pressure hydraulic service. Operation E (losed) FULL FLOW F J FLOW When air is moving in the free flow direction through the valve, it forces the poppet off its seat and unrestricted air flow is permitted. When air is moving in the metered direction through the valve, air pressure and the force of the poppet spring causes the poppet to close. Flow must then be through the orifice that is controlled by the metering screw. Opening this screw allows more flow; closing it, less flow. Technical Specifications ody: rass Port Size: 1/8", 1/4", 3/8", 1/2", 3/4" Internal omponents: rass, Stainless Steel Seals: una N : Standard: 0 F to 180 F Extended Options: 0 F to 300 F Operating Pressures: ir: 400 PSIG Hydraulic: 800 PSIG Valve will operate mounted in any position. Lock nut on metering screw prevents change in setting during operation. Flow Rating (SFM) Flow Path Valve Port Size 1/8" 1/4" 3/8" 1/2" 3/4" Maximum Flow in Metered irection Maximum Flow in Free Flow irection Model Selection Information and imensions Model Number Port Size NPTF 1/8" 1/4" 3/8" 1/2" 3/4" Inches mm Inches mm Inches mm Inches mm Inches mm E F Englewood, olorado

5 atalog 9W-J-261 Flow ontrol Valves Flow ontrols & ccessories 3250 Series 1", 1-1/4" & 1-1/2" Ports pplication These extra large flow control valves have been developed to provide effective flow settings for large diameter cylinders and for other similar air applications. Each valve has a fine screw adjustment allowing precise settings which are secured by a sturdy lock nut. Operation F dj Flow (losed) Technical Specifications Full Flow G H (Hex) E Large internal port passages coupled with unique soft seal poppet and inline design provide maximum full flow capacity and minimum pressure drop in the free flow direction. Their cone shaped brass metering valve will provide consistent cylinder speed by regulating cylinder exhaust. Flow apacity In Full Flow irection ody: ast luminum Port Size: 1", 1-1/4", 1-1/2" Internal omponents: rass, luminum Seals: una N, Urethane Spring: Stainless Steel : Standard: 40 F to 180 F Extended Options: 40 F to 350 F Port Max. Flow Size (Needle Open) Model (NPTF) Number SFM** v / / ** t 100 PSIG inlet pressure with full pressure drop. Operating Pressures: Maximum ir: 250 PSIG Model Selection Information and imensions Model Number Port Size NPTF 1" 1-1/4" 1-1/2" Inches mm Inches mm Inches mm E F G H Englewood, olorado

6 atalog 9W-J-261 Miniature Right ngle Flow ontrol Flow ontrols & ccessories FM701 & FM703 Series General Information FM701 H L M Miniature right angle flow controls provide meter out control of exhaust air from an air cylinder while providing full flow in the reverse direction. The male thread can be used to mount directly to cylinder ports. The inlet ports are available in 5-32 or 1/4" instant tube fittings. The adjustment screw is captive and discourages tampering. This compact flow control saves space and reduces the number of fittings involved in making the connection. Plumbing can be oriented 360 about the cylinder port. H 145 PSIG (10 bar, 1000 kpa) max. FM703 omponent Materials L M Temperature Range* 0 F to 140 F (-18 to 60 ) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. ody: Polyamide Mounting thread: rass imensions Miniature Exhaust Flow ontrol FM701 omposite ody Tube Thread Hex H H Flow djusted Free Flow Part No. Size Size (mm) losed Open L M ia. Flow (SFM) (SFM) FM701-5/32-0 5/ FM701-5/32-2 5/32 1/ FM / FM /4 1/ FM /4 1/ Knobless Miniature Exhaust Flow ontrol FM703 omposite ody Tube Thread Hex H H Flow djusted Free Flow Part No. Size Size (mm) losed Open L M ia. Flow (SFM) (SFM) FM703-5/32-0 5/ FM /4 1/ FM /4 1/ Englewood, olorado

7 atalog 9W-J-261 Right ngle Flow ontrol Flow ontrols & ccessories F701, F702 & FS701 Series F701 F702 FS701 imensions J J L Open L losed L losed L Open Hex 2 J Hex 1 L Open Hex 2 L losed N M M Hex 1 N Hex 2 Hex 1 Hex 2 M N pplication The Right ngle Flow ontrol is an ideal solution to cylinder speed control where space is at a premium. ostly fittings, connections and piping expenses can be eliminated because the valve can rotate 360, the piping alignment can be in any direction. Operation Install by threading male end directly into cylinder port. The free-flow and metered-flow direction is automatically predetermined. Free-flow direction is into cylinder and metered-flow is out of the cylinder. Flow is adjusted with an llen wrench and locked with nut. F701 Series is available with Prestolok fittings on inlet port to accommodate 1/8 1/2 tube sizes. This allows for quick connection and eliminates need for separate tube fitting. F702 Series is available with a threaded inlet connection. FS701 Series is available with a swivel outlet, for use where access is restricted. Specification and escription ody: rass lack Epoxy oated olt Material: rass Plunger: rass and cetal Seals: una N Temperature Range: -10 F to 200 F (-23 to 93 ) Pressure Rating: 145 PSIG (10 bar, 1000 kpa) max. Tube Thread Hex Hex L L djusted Free Flow Part No. Size Size 1 2 Open losed N M J Flow (SFM) (SFM) Flow ontrol with Push-in onnecton F701 F / /16 5/ F /8 1/8 5/16 5/ F701-5/32-0 5/ /16 5/ F701-5/32-2 5/32 1/8 5/16 5/ F701-5/32-4 5/32 1/4 5/16 5/ F /4 1/8 5/16 5/ F /4 1/4 5/16 5/ F /4 3/8 5/16 13/ F /8 1/4 5/16 5/ F /8 3/8 5/16 13/ F /8 1/2 9/ F /2 1/2 9/ Flow ontrol with Threaded onnection F702 F /8 1/8 5/16 5/ F /4 1/4 5/16 5/ F /8 3/8 5/16 13/ F /2 1/2 9/ Flow ontrol with Swivel Outlet FS701 FS /8 1/8 5/16 5/ FS701-5/32-0 5/ /16 5/ FS701-5/32-2 5/32 1/8 5/16 5/ FS701-5/32-4 5/32 1/4 5/16 5/ FS /4 1/8 5/16 5/ FS /4 1/4 5/16 5/ FS /16 1/4 5/16 5/ FS /8 1/4 5/16 5/ FS /8 3/8 5/16 13/ FS /8 1/2 9/ Englewood, olorado

8 atalog 9W-J-261 Miniature Right ngle Flow ontrol Flow ontrols & ccessories M5 (10-32) Port 3mm ia. General Information Miniature right angle flow controls provide meter out control of exhaust air from an air cylinder while providing full flow in the reverse direction. The M5 (10-32) male thread can be used to mount directly to cylinder ports. The inlet ports are available in M5 (10-32) male or 5/32" instant tube fitting. The adjustment screw is captive and discourages tampering. This compact flow control saves space and reduces the number of fittings involved in making the connection. Plumbing can be oriented 360 about the cylinder port. L K H 145 PSIG (10 bar) omponent Materials ody: Polyamide Mounting thread: rass 0 to 140 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Model Selection Ports Wrench Male Female Size Model Number M5 M5 5/16" PWRE14557 M5 5/32" Tube 5/16" PWRE14457 Note: Standard fittings will fit the M5 threads on valve body. imensions - Inches (mm) K H L (11) (4) (7,2) (17) (20) Flow No of Exhaust Inlet Turns (Screw Open) (Screw losed) SFM 1.8 SFM 8 Englewood, olorado

9 atalog 9W-J-261 Heavy uty Right ngle Flow ontrol Flow ontrols & ccessories 3251 Series pplication The Heavy uty Right ngle Flow ontrol is an ideal solution to cylinder speed control where space is at a premium. ostly fittings, connections and piping expenses can be eliminated because the valve can rotate 360, the piping alignment can be in any direction. The 1/8" model can be rotated after final assembly. Shown with Threaded Inlet Shown with Prestolok Inlet Fitting 1 Metered Flow Open Free Flow Operation Install by threading male end directly into cylinder port. The free-flow and metered-flow direction is automatically predetermined. Free-flow direction is into cylinder and metered-flow is out of the cylinder. Flow is adjusted with an llen wrench and locked with nut. Heavy uty Right ngle Flow ontrol also available with Prestolok fittings on inlet port to accommodate 5/32-3/8 tube sizes. This allows for quick connection and eliminates need for separate tube fitting. Specification and escription ody: rass Plunger: rass and cetal Seals: una N Temperature Range: 0 F to 140 F ( 18 to 60 ) Pressure Rating: 125 PSIG (863 kpa) max. Model Selection Information and imensions Thread Thread Weight v Model (NPT) (NPT) djusted Free Number Inches mm Inches mm Inches mm oz. kg. Male Female Flow Flow /8 1/ /4 1/ /8 3/ /2 1/ With Prestolok Thread Tube Fittings (NPT) Size 1 Weight v /8 5/ /8 1/ /4 1/ /4 3/ /8 3/ ! UTION: If it is possible that the ambient temperature may fall below freezing, the medium must be moisture-free to prevent internal damage or unpredictable behavior. 9 Englewood, olorado

10 atalog 9W-J-261 Needle Valves Flow ontrols & ccessories SPN Series 1/8" to 1/2" Ports General Information The SPN Series needle valves provide excellent bi-directional speed control for pneumatic and hydraulic applications. E F (Open) SPN valves are manufactured with a two step needle. Fine metering is accomplished over the initial adjustment turns and nominal metering is provided over the remaining turns. Once the desired flow is selected, a set screw can be tightened to maintain the setting. (oth Ends) These valves are available with NPTF ports in 1/8", 1/4", 3/8" and 1/2" sizes. omponent Materials ody: rass Needle: Stainless Steel Needle seals: Nitrile (Standard), Fluorocarbon (Optional) Knob: luminum 2000 PSI Non-Shock Standard: 0 to 140 F* Extended temperature: 0 to 400 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Model Selection and imensions Model Number Port Size E F SPN200 1/8-27 NPTF SPN400 1/4-18 NPTF SPN600 3/8-18 NPTF SPN800 1/2-14 NPTF For units with Fluorocarbon seals, add suffix V. Example: SPN200V Performance ata ontrolled Flow Needle Full Open Model Flow - SFM rea 100 PSI v Sq. Inches Full P SPN SPN SPN SPN Englewood, olorado

11 atalog 9W-J-261 Needle Valves Flow ontrols & ccessories 338 Series 1/8" to 3/4" Ports I. General Information 338 Series needle valves bi-directionally meter the flow of air through the valve. This series features a fine tapered needle providing precise flow of air in both directions. Numerical micrometer position markings are stamped on the perimeter of the adjustment knob which provide a visual indication of the setting. Once the desired flow is selected, a set screw can be tightened to maintain the setting. O-ring for friction H1 - OPEN H2 - LOSE These valves are available with NPTF ports in 1/8", 1/4", 3/8" 1/2" and 3/4" sizes. This series is recommended for pneumatic service. omponent Materials ody Material: rass Internal omponents: Stainless Steel/rass Seals: Nitrile (Fluorocarbon optional consult factory) 250 PSIG (ir) Standard: 0 to 180 F* Extended Temperature: 0 F to 300 F* (onsult factory) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Model Selection and imensions Port imensions Service Size Model H1 H2 Kit 1/8" /16" /4" /16" /8" /8" /2" /16" /4" /8" Performance ata Flow Port Model Flow Size Number (SFM ) 1/8" /4" /8" /2" /4" t 100 PSIG inlet pressure with full pressure drop. 11 Englewood, olorado

12 atalog 9W-J-261 heck Valves Flow ontrols & ccessories SP Series 1/8" to 1/2" Ports General escription heck valves provide free flow of air or oil in one direction and dependable shutoff in the opposite direction. These valves are available with NPTF ports in 1/8", 1/4", 3/8" and 1/2" sizes. Sq. Free Flow omponent Materials ody: rass Poppet: Stainless Steel Poppet Seal: una (Nitrile) Poppet Retainer: Stainless Steel Spring: Stainless Steel Poppet Style: Soft Seal Standard 2000 PSI Non-Shock 0 to 140 F* -40 to 140 F (Hydraulic service) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Model Selection and imensions Model Number Port Size SP200 1/8-27 NPTF SP400 1/4-18 NPTF SP600 3/8-18 NPTF SP800 1/2-14 NPTF Performance ata - Flow Model Free Flow Orifice Number Port Size, Inches SFM* v area, in. 2 SP200 1/8-27 NPTF SP400 1/4-18 NPTF SP600 3/8-18 NPTF SP800 1/2-14 NPTF * t 100 PSI, Full P 12 Englewood, olorado

13 atalog 9W-J-261 heck Valves Flow ontrols & ccessories 339 Series, 3047 Series 339 Series 1/8" to 3/4" Ports /4" Male Pipe 13/16 Hex 35/64 Flats.22 (6) ia (59) General Information 339 Series check valves allow free flow in one direction and provide positive checked (zero flow) in the reverse direction. These valves are available with NPTF ports in 1/8", 1/4", 3/8", 1/2" & 3/4" sizes. This series is recommended for pneumatic service. 250 PSIG racking Pressure: 1 to 2 PSIG Standard: 0 to 180 F* Extended Temperature Option: 0 F to 300 F* omponent Materials ody Material: rass Internal omponents: rass / Stainless Steel / Zinc- Plated Steel Seals: Urethane (standard), Fluorocarbon (optional consult factory) Model Selection and imensions Port Model Flow imensions Service Size Number (SFM) Kit 1/8" /4" /8" /2" /4" General Information 3047 Series check valves allow free flow in one direction and provide positive checked (zero flow) in the reverse direction. This valve is available with a male 1/4" NPTF connection and is recommended for pneumatic service. 250 PSIG racking Pressure: 1 to 2 PSIG Standard: 0 to 180 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. omponent Materials ody Material: rass Internal omponents: rass/stainless Steel Seals: Nitrile Model Selection Pipe Model Flow Thread Number (SFM) 1/4" t 100 PSIG inlet pressure with full pressure drop. 13 Englewood, olorado

14 atalog 9W-J-261 Muffler / Filters, Muffler / Speed ontrols Flow ontrols & ccessories EM Series, Muffler / Speed ontrols EM Series Sintered ronze Muffler / Filters Muffler / filters effectively reduce air exhaust noises to an industry accepted level with minimum flow restriction. They protect valves, impact wrenches, screw drivers and other air tools by preventing dirt and other foreign matter from entering the system. Noncorrosive. an be cleaned with many common solvents. 250 PSIG (ir) 0 to 300 F* Pipe Thread Model Number Overall Length Hex Size 1/8" EM /16" 1/4" EM /16" 3/8" EM /16" 1/2" EM /8" 3/4" EM /6" 1" EM /16" 1-1/4" EM /16" 1-1/2" EM " Muffler / Flow ontrols Muffler / Flow controls provide an acceptable exhaust noise level and effectively meter exhaust. Installed in valve exhaust ports, they control cylinder piston speeds throughout a wide range. The adjusting screw cannot be accidently blown out, can be locked to maintain setting. rass and bronze construction. lean with commonly used solvents. 250 PSIG (ir) 0 to 300 F* Pipe Thread Model Number Overall Length Hex Size 1/8" /16" 1/4" /8" 3/8" /16" 1/2" /8" 3/4" /16" 1" /16" 14 Englewood, olorado

15 atalog 9W-J-261 reather Vents, Silencers Flow ontrols & ccessories reather Vents & ES Series reather Vents NOTE: reather vents should not be used as exhaust mufflers. These low silhouette versions of the muffler/filter are useful where space is a problem and/or to prevent contamination. Use for vacuum relief or pressure equalization in gear boxes, oil tanks, reservoirs, etc. Non-corrosive. 250 PSIG (ir) 0 to 300 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. Pipe Thread Model Number Overall Length Hex Size 1/8" /16" 1/4" /16" 3/8" /16" 1/2" /8" 3/4" /6" 1" /16" 1-1/4" /16" 1-1/2" " ES Series Silencer E The silencer is designed to give superior performance in noise control with a minimum effect on air efficiency. Trimline design allows location in the tightest places without extra plumbing and fittings. Fits directly into the exhaust port of more than 90% of present commercial valves. Slotted body permits rapid discharge of air without undesirable back pressure. Unique nylon screen element resists dirt buildup or clogging. 250 PSIG (ir) NPT 0 to 300 F* Pipe Thread Model Numbers imensions Flow 100 PSIG Inlet NPTF SPT (R) E 1/8" ES12M ES12M /8" 1/4" ES25M ES25M /8" 3/8" ES37M ES37M /4" 1/2" ES50M ES50M /4" 3/4" ES75M ES75M /2" 1" ES100M ES100M 1, /2" 1-1/4" ES125M ES125M 1, /2" ES150M ES150M 1, Englewood, olorado

16 atalog 9W-J-261 ir Line Silencer Plastic Flow ontrols & ccessories SN Series M5, 1/8", 1/4", 3/8" & 1/2" Features ompact Lightweight Easy to install Excellent noise reduction Protects components from contamination NPT & SPT threads available pplication The plastic silencer is designed to give excellent noise reduction with a minimum effect on air efficiency. The Trimline design allows for locating the silencer in the tightest places without extra plumbing or fittings. Fits directly into the exhaust port of most commercial valves. Open surface area of element allows for rapid discharge of air without undesirable back pressure. Part Maximum Flow Sound Pressure Thread Number Level (d) (SFM) Size (mm) (mm) NPT SPT 100 PSIG Inlet 20 PSIG 100 PSIG Inlet Inlet M5 S-5 1/8" SN-6 S-6 1/4" SN-8 S-8 3/8" SN-10 S-10 1/2" SN-15 S (11) (8) (40) (16) (65) (21) (85) (25) (95) (30) Specifications ody: cetal (Plastic) Element: Polyethylene Pressure Rating: 0 to 150 PSIG (0 to 10 bar, 0 to 1034 kpa) Temperature Rating: 14 F to 140 F (-10 to 60 ) 16 Englewood, olorado

17 atalog 9W-J-261 ir Line Muffler Reclassifier Flow ontrols & ccessories ES Series 1/2" & 1" Performance haracteristics da Flow vs. Noise Level 1" Open Pipe ES5 1/2" Open Pipe ES SFM Features dm 3 /s n bar 10 PSI imensions: Model ES /2" 2.57 (135 mm) NPT (65 mm) ES " 2.57 (185mm) NPT (65mm) Flow vs. ack Pressure ES3 ack Pressure ES5 ack Pressure SFM dm 3 /s n The ES (Muffler-Reclassifier) eliminates unwanted oil mist and reduces exhaust noise from pneumatic valves, cylinders and air motors % Oil removal efficiencies 25 d Noise attenuation 1/2" NPT and 1" NPT isposable units ontinuous or plugged drain option Metal retained construction Fast exhaust time Improve Overall Plant Environment Exhaust oil mist and noise pollution have a direct impact on worker productivity. Oil aerosol mist from lubricators and compressors is pervasive and enters the industrial plant environment through the exhaust ports of valves, cylinders and air motors. This rapidly expanding exhaust also produces sudden and excessive noise. The ES (Muffler-Reclassifier) is 99.97% efficient at removing the oil aerosols. The ES also acts as a silencer to lower the d levels below O.S.H.. requirements. The result is a cleaner, quieter environment which equates to greater work productivity and safety. Operation ompressor oils and lubricating oils are exhausted from valves, cylinders and air motors into the ES. Oil aerosols are coalesced into larger droplets and gravity pulls them into the attached drain sump. The sump can then be drained manually or by using a 1/4" I plastic tube drain. The air flowing into the ES is also muffled or silenced as it enters the inside of the ES and passes through the filter media into the atmosphere. Proven Technology The ES units are constructed from the same materials that go into our oil removal coalescing filter elements. The seamless design insures media uniformity and strength. This proven technology provides high coalescing efficiency with low pressure drop. The filter media is supported by cylindrical perforated steel retainers both inside and out. These retainers, fully plated for excellent corrosion resistance, give the ES units high rupture strength in either flow direction. These filters can also be used as high efficiency inlet or bypass filters for vacuum pumps, or breather elements to protect the air above critical process liquids. ES3 / ES5 The ES solves two problems inherent in compressed air exhaust from valves, cylinders and air motors - oil mist removal and noise abatement. The ES will improve your industrial plant environment, thereby improving worker productivity. Specifications Maximum 125 F (52 ) Maximum Line Pressure 100 PSIG (690 kpa) Ordering Information ES 3 Size 3. 1/2 inch 5. 1 Inch Engineering Level. urrent 17 Englewood, olorado

18 atalog 9W-J-261 utomatic rip Leg rain, Relief Valve Flow ontrols & ccessories Features & Operation utomatic rip Leg rain Relief Valve F Features uto drain ported 1/8" to pipe away liquid. rain has manual override. Easily serviced without tool PSIG range. ompact size. Specifications Housing & ap: luminum Port Threads: 1/4" - 1/2" Top 1/8" rain Pressure & Temperature Ratings Metal owl: 0 to 250 PSIG (0 to 1725 kpa) 32 F to 175 F (0 to 80 ) Seals: una N Ordering Information onsists of rip Leg rain Housing WITH uto rain. Model No. Size 061N 1/4" 063N 1/2" mm 60 mm 22 mm.75 Hex mm 50.8 mm Features Large relief capacity in a compact size. Lightweight aluminum construction with resilient seat. pplication The RV011N Pop Off Relief Valve is designed to protect against excessive pressure buildup in a pneumatic circuit or system. Operation With the relief valve mounted in a reservoir or system, the force of system pressure at () is offset by the force of spring () acting on poppet seat (). t pressures lower than the setting, the poppet seat () is held against the body at () effecting a seal. When pressure rises above the set point, the force of the pressure lifts the poppet seat () off the body at () allowing the excess pressure to vent to atmosphere at (F). When the excess pressure has been vented, the spring () acts on the poppet seat () forcing it to seat on the body at (), sealing off the flow of air. Specification ody, Lock Nut & djusting Screw: luminum Seat: Nitrile Spring: Steel Poppet: Plastic : 32 F to 200 F (0 to 93 ) Port Threads: 1/4 Inch Male Relief Range: 50 to 200 PSIG (1.7 to 14 bar) with standard spring. onsult factory for pressures below 50 PSIG. Ordering Information RV011N 100 Standard Model With Specify Pressure Setting 1/4 Inch Male Thread PSIG Using Three igits Standard Setting is 100 PSIG 18 Englewood, olorado

19 atalog 9W-J-261 Quick Exhaust & Shuttle Valves Flow ontrols & ccessories 0R Series 1/8" thru 3/4" Ports 1 3 Port 3 (Exh) General Information 1 3 Port 1 (In) 2 Port 2 (yl) Quick exhaust valves provide rapid exhaust of control air when placed between control valve and actuator. They can also be used as shuttle valves. iaphragm materials are available in urethane, Nitrile, Fluorocarbon, and PTFE to meet a wide variety of operating conditions. Operating Pressure (ir) Maximum: 150 PSIG 200 PSIG for Model No (PTFE diaphragm) Minimum: 3 PSIG 50 PSIG for Model No (PTFE diaphragm) Urethane: 0 F to 180 F* (-18 to 80 ) Nitrile: 0 F to 180 F* (-18 to 80 ) Fluorocarbon: 0 F to 400 F* (-18 to 205 ) PTFE: 0 F to 500 F* (-18 to 260 ) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require slubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. omponent Materials ody Material: ie cast aluminum Static Seals: Model Selection, Performance ata and imensions Nitrile standard with urethane (Others see below) iaphragm: Standard Urethane Optional Fluorocarbon, PTFE, or Nitrile (epending on size) Mounting racket Kit No (Including body screws) For 0R12 and 0R25 sizes. Port Flow Model Number Service (SFM ) NPTF SPP G Kit No. STNR URETHNE IPHRGMS (Nitrile static seals) 1/8" 1/8" 70 0R12 0R12 7/8" Sq /8" 1/8" 1/4" 70 0R12N 0R12N 7/8" Sq /4" 1/4" 90 0R25 0R25 7/8" Sq /4" 1/4" 3/8" 150 0R25N 0R25N 1" Hex /8" 3/8" 240 0R25P 0R25P 1" Hex /8" 3/8" 3/8" 240 0R37 0R37 1" Hex /2" 1/2" 1/2" 450 0R50 0R50 1-1/2" Hex /4" 3/4" 3/4" 550 0R75 0R75 1-1/2" Hex NITRILE IPHRGMS (Nitrile static seals) 1/4" 3/8" 90 0R25NF 0R25NF 7/8" Sq /4" 3/8" 3/8" 150 0R25PF 0R25PF 1" Hex /8" 3/8" 3/8" 240 0R37F 0R37F 1" Hex /4" 3/4" 3/4" 550 0R75F 0R75F 1-1/2" Hex FLUORORON IPHRGMS for extended temperature operation (Fluorocarbon static seals) 1/8" 2 1/8" 1/8" 70 0R12V 0R12V 7/8" Sq /8" 1/4" 70 0R12NV 0R12NV 7/8" Sq /4" 1/4" 1/4" 90 0R25V 0R25V 7/8" Sq /8" 3/8" 3/8" 240 0R37V 0R37V 1" Hex /2" 1/2" 1/2" 450 0R50V 0R50V 1-1/2" Hex /4" 3/4" 3/4" 550 0R75V 0R75V 1-1/2" Hex PTFE IPHRGMS for higher pressure and temperature (Fibre static seals) 3/8" 3/8" 3/8" 240 0R37T 0R37T 1" Hex t 100 PSIG inlet pressure with full pressure drop. old part numbers standard. 19 Englewood, olorado

20 atalog 9W-J-261 Quick Exhaust & Shuttle Valve Flow ontrols & ccessories Typical pplications Typical Quick Exhaust Valve pplications PRESSURE MN PRESSURE REG PRESSURE Rapid Retraction ouble cting ylinder In this circuit, air is exhausted through a Quick Exhaust Valve that is close coupled to the cap end of the cylinder. ecause the Quick Exhaust Valve has a greater exhaust capacity than the four-way ontrol Valve, increased cylinder speed can be accomplished with a smaller and less expensive control valve. ual Pressure ctuation of ouble cting ylinder This circuit utilizes a Quick Exhaust Valve and a three-way ontrol Valve to permit rapid extension of the cylinder at a high pressure. Retraction can be accomplished at a lower pressure, thus saving air and increasing cylinder life. NOTE: Line pressure must be 3 or 4 times greater than rod end pressure. Effective working pressure is the differential between the cap and rod end. i-irectional ontrol of Two ouble cting ylinders This circuit provides maximum control with a minimum of valving. large four-way ontrol Valve is not needed to permit the rapid retraction of ylinder, as the Quick Exhaust Valve performs this function. The extension of ylinders and and retraction of ylinder are controlled by Speed ontrol Valves. Typical Shuttle Valve pplications MN M N OPERTION MN OPERTION 2 OPERTION 3 MN PRESSURE M N PRESSURE OPERTION 1 MN PRESSURE MN OR ircuit The most common application of the Shuttle Valve is the OR ircuit. Here a cylinder or other work device can be actuated by either control valve. The valves can be manually or electrically actuated and located in any position. Memory ircuit This circuit enables continuous operation once initiated. Pressure is delivered to the circuit when Valve is actuated. This allows pressure to pass through the shuttle valve actuating Valve. Pressure then flows through Valve and also the other side of the shuttle valve which holds Valve open for continuous operation. To unlock the circuit, Valve must be opened to exhaust the circuit and allow Valve to return to its normally closed position. Interlock This circuit prevents the occurrence of a specific operation while one or another operation takes place. When either Valve or is actuated to perform operation 1 or 2, Valve is shifted to the closed position and prevents operation 3 from occurring. 20 Englewood, olorado

21 atalog 9W-J-261 Shuttle Valve (Revised 8/18/05) Flow ontrols & ccessories 1/8" to 3/8" Ports General Information Shuttle valves determine a single pneumatic output from two separate inputs. If pressure is applied to both ports simultaneously, the valve will select the port with the higher pressure. 200 PSIG Maximum 3 PSIG Minimum: ifferential Pressure F E INLET INLET J 0 to160 F* G OUTLET K (3 Ports) H L ia. (2 Holes) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. valves should be used with filtered and lubricated air. omponent Materials ody Material: luminum Internal omponents: luminum Seals: Nitrile Model Selection and imensions Port imensions Size Model 1 E F G H J K L 1/8" N N/ / /4" N / /8" N / Performance ata Flow Port Model Flow Size Number (v) 1/8" N /4" N /8" N Englewood, olorado

Flow Controls & Accessories

Flow Controls & Accessories Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9

More information

Flow Controls & Accessories

Flow Controls & Accessories ontrols & ccessories Section Y ontrol Valves SPF Series... 2 337 Series... 3 3250 Series... 4-5 Miniature Right ngle... 6 3251 Series... 7 FM701 & FM703 Series... 8 F701, F702, FS701 Series... 9 Needle

More information

Accessories G53. Catalog 9EM-TK-190-5

Accessories G53. Catalog 9EM-TK-190-5 ccessories Tank Valves & ir hucks...54 EM Series Exhaust Muffl ers...55 Muffl er / Flow ontrols...55 reather Vents...56 ES Series Silencer...56 SN ir Line Silencer...57 P6M ir Line Silencer...58 Muffl

More information

Accessories. Truck Hydraulics Center Section E. Accessories. Catalog 0650-E Flow Controls & Accessories

Accessories. Truck Hydraulics Center Section E. Accessories. Catalog 0650-E Flow Controls & Accessories Catalog 0650-E Flow Controls & Section E E E1 E Catalog 0650-E Flow Controls & FCM701 Series Miniature Exhaust Flow Control Composite body FC800 Series In-Line Flow Control with Push-in Connection FC806

More information

F20 & F21 QIX Particulate & Coalescing Filters

F20 & F21 QIX Particulate & Coalescing Filters F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port

More information

FRL/AirCare Air Controls & Accessories

FRL/AirCare Air Controls & Accessories FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor

More information

atalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32" Tube Instant onnections Driving ressure U xhaust ack ressure Thresho

atalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32 Tube Instant onnections Driving ressure U xhaust ack ressure Thresho Threshold Sensors... 2-3 locking Valves...4 3-Way, 2-osition Standard Duty... 5-8 Technical Data...9 Dimensions... 10-11 3-Way Miniature...12 Dimensions... Miniature and Standard Duty Limit Switches, ylinder

More information

PDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe

PDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -

More information

Modulating Water Valves and Bulb Wells

Modulating Water Valves and Bulb Wells Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature

More information

Model Model 815

Model Model 815 Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............

More information

Air Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. Port size: 1/4 to 1 JIS symbol Specifications Description

Air Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. Port size: 1/4 to 1 JIS symbol Specifications Description ir Filter Outdoor Series FW4000/FW8000-W Series Outdoor types now developed into a series. : 1/4 to 1 JIS symbol Specifications FW4000-W FW8000-W Working fluid ompressed air Max. working pressure MPa 1.0

More information

Stainless Steel FRLs

Stainless Steel FRLs Stainless steel FRLs Stainless Steel FRLs Units 205 Stainless steel FRLs - PF504 Series - 1/4 Inch Ports PF504 Filter Miniature Features Stainless steel construction handles most corrosive environments

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

Your Global Source for Today s Most Popular Solenoid Valves

Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International

More information

Sliding Seal & Brass Poppet Valves

Sliding Seal & Brass Poppet Valves Sliding Seal & rass Poppet Valves anually Operated Section PL / VL Series... 2-3 HV Valve... 4-5 Hand Operated Valves,... 6-7 utton Operated Valves...8 Hand / Cam utton Valves...9 leed Valve...10 old text

More information

Lubricator Series Functional explanation / Dimensions

Lubricator Series Functional explanation / Dimensions 00E/00E Series Lubricator / utofill type Only installing oil tank enables lubrication to multiple lubricator. : Rc/ to Rc JIS symbol ir uto. drain Specifications escriptions 00E///V 00E/8V ompact lean

More information

Pneumatic. Prep-Air II 05 Series Air Preparation Units Filter, Regulator, Lubricator, and Modular Accessories Catalog 0708/USA

Pneumatic. Prep-Air II 05 Series Air Preparation Units Filter, Regulator, Lubricator, and Modular Accessories Catalog 0708/USA Prep-ir II 5 Series ir Preparation Units Filter, Regulator, Lubricator, and Modular ccessories atalog 78/US WRNING FILUR OR IMPROPR SLTION OR IMPROPR US OF TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N

More information

MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD

MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and

More information

AIR PREPARATION PRODUCTS. Table of Contents

AIR PREPARATION PRODUCTS. Table of Contents AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................

More information

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2 & 3/4 Ports. Technical & Service Data. Pneumatic atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation

More information

Model ZW204 Non-Modulating Float Valve

Model ZW204 Non-Modulating Float Valve Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the

More information

CONTROL VALVES W910 Series

CONTROL VALVES W910 Series ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,

More information

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)

More information

Power Valve Precision Regulator

Power Valve Precision Regulator Power Valve Precision Regulator VEX Series High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air

More information

Vacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan

Vacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan Vacuum Accessories Section E E 1 Notes 2 Index Contents Convum Filters... 4-5 Convum Silencers... 6 Silencer (Flow Thru)... 7 ASN Series Air Line Mufflers... 8 E 3 (Revised 10/13/04) Ordering Information

More information

Valvair Manual Spool Valves

Valvair Manual Spool Valves Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55

More information

Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.

Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam. Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable

More information

Flowmeters & Monitors A range of cost saving solutions

Flowmeters & Monitors A range of cost saving solutions & Monitors range of cost saving solutions Protect systems, reduce fluid and air loss and increase efficiency Effective and accurate flow measurement n extensive range of flow metering products. LoFlow

More information

1 6 / 2 6 S E R I E S C O M P A C T & S T A N D A R D M O D U L A R A I R P R E P A R A T I O N S Y S T E M S

1 6 / 2 6 S E R I E S C O M P A C T & S T A N D A R D M O D U L A R A I R P R E P A R A T I O N S Y S T E M S 16/26 SRIS O M P T & S T N R M O U L R I R P R P R T I O N S Y S T M S WILKRSON FILTRS, RGULTORS N LUBRITORS R26 Regulator F26 Filter L26 Lubricator M16 oalescing Filter B6 Filter/Regulator w/ Optional

More information

A range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors

A range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors range of cost saving solutions Flowmeters &Monitors 29 Flowmeters &monitors LoFlow - and Flowmeters Easy to read, permanent printed scales. Large scale definition for precise measurement. Easy panel mounting

More information

Winslow Lube Oil By-Pass Type 1 Filter Service Instructions

Winslow Lube Oil By-Pass Type 1 Filter Service Instructions Vent Plug (NPT) Winslow Lube Oil y-pass Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on Page

More information

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in. Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.

More information

Pneumatic mufflers. For compressed air systems, machines, pumps, compressors, etc. Dimensions 1/8 6 Internal or external thread BSP or NPT thread

Pneumatic mufflers. For compressed air systems, machines, pumps, compressors, etc. Dimensions 1/8 6 Internal or external thread BSP or NPT thread Pneumatic mufflers Harmful noise levels often occur in the field of pneumatics and vacuums. We have a range of high-quality silencers which effectively reduce noise with minimal impact on air throughflow.

More information

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting

More information

Series AN05 to 40 RoHS

Series AN05 to 40 RoHS Silencer Compact Resin Type/Male Thread N0 to 40 RoHS How to Order N 0 Body size Specifications 0 0 30 40 Thread type M thread Nil R N NPT Thread connection port size pplicable model M 0 0 03 04 M x 0.8

More information

F200 Pilot Operated Pressure Regulator

F200 Pilot Operated Pressure Regulator F00 Pilot Operated Pressure Regulator External or Internal Pressure Registration Minimize Sudden ownstream Load Change Ideal for Fix Factor Billing Quick Response Time / High ccuracy The F00 series is

More information

BULLETIN. Manufacturers of Premium Pneumatic Controls since 1921

BULLETIN. Manufacturers of Premium Pneumatic Controls since 1921 ULLETIN ENERGY-ISOLTION & EEZ-ON PRODUTS L-O-X Valves EEZ-ON Valves L-O-X Valves with EEZ-ON Operation Manufacturers of Premium Pneumatic ontrols since 9 7 Regulations for Workplace Safety The Occupational

More information

VNA VNB SGC SGH VNC VNH VND VCC

VNA VNB SGC SGH VNC VNH VND VCC Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable

More information

MagHex Fan Controller

MagHex Fan Controller MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling

More information

Bellows-Sealed Valves

Bellows-Sealed Valves www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and

More information

BC SERIES CHECK VALVE

BC SERIES CHECK VALVE SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG

More information

Pneumatic Products. the total systems approach to air preparation. Airline Accessories. Catalog 606

Pneumatic Products. the total systems approach to air preparation. Airline Accessories. Catalog 606 Pneumatic Products irline ccessories atalog 606 the total systems approach to air preparation Warning, Offer of Sale Pneumatic Products irline ccessories! WRNING FIURE OR IMPROPER SEETION OR IMPROPER USE

More information

Quick Couplings. Section F

Quick Couplings. Section F Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions

More information

FLOW CONTROL VALVES A5-1 PN# / / ACC

FLOW CONTROL VALVES A5-1 PN# / / ACC FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control

More information

Catalog 080-/USA Notes Vacuum Control Valves

Catalog 080-/USA Notes Vacuum Control Valves Vacuum Control Valves Section Catalog 080-/USA Notes Vacuum Control Valves Catalog 080-/USA Index Vacuum Control Valves VA0 Vacuum Control Valves for Centralized Vacuum Systems VA0PSV & VA0PSP, -Port,

More information

Emergency Shear Valves

Emergency Shear Valves Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually

More information

Fluid Power Accessories

Fluid Power Accessories Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 PNEUMATIC EXHAUST MUFFLERS Breather Vents 2,3 Exhaust Mufflers 2-5 Reclassifiers / Mufflers 6,7 BREATHER VENTS Speed

More information

503 Series Solenoid Pilot Actuated Valves

503 Series Solenoid Pilot Actuated Valves Solenoid Pilot ctuated Valves Offered by: Specialists in Valves, ontrols, Pneumatics, Fluid Measurement Phone: (203) 261-6711 www.okcautomation.com 5 Ported, 2 and 3 position, 4-way, Spool & Sleeve and

More information

Section F Air Atomizing Spray Nozzles

Section F Air Atomizing Spray Nozzles Section F tomizing Overview If your application requires air atomizing nozzles, you ll find information on the largest selection in the industry available in this section. hoose from dozens of nozzle bodies,

More information

Piston Accumulators Series Catalog HY /US Page

Piston Accumulators Series Catalog HY /US Page Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End

More information

pneumatic function fittings

pneumatic function fittings Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 email: sales@mdmetric.com web:

More information

N Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D

N Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information

More information

MIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler

MIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler MIS SERIES Mist Eliminator The ircel MIS Mist Eliminator (300-8000 scfm) provides a full line of mist eliminators to effectively remove oil, solids and water from your compressed air system. In addition,

More information

Function Fittings, Flow Controls, and Accessory Valves

Function Fittings, Flow Controls, and Accessory Valves Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right

More information

IC3A, IC3D, IC4A and IC4D ISO Spirax-Monnier International Ultraclean Compressed Air Filters

IC3A, IC3D, IC4A and IC4D ISO Spirax-Monnier International Ultraclean Compressed Air Filters Page 1 of 5 ert. No. LRQ 0963008 Manual rain TI-P501-01 H Issue 5 I3, I3, I4 and I4 ISO 9001 Spirax-Monnier International Ultraclean ompressed ir Filters uto rain International Symbol escription The Spirax-Monnier

More information

VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves

VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves Product ulletin VG000 Issue ate 11/01/01 VG000 Series High-apacity/High-loseoff Electric Zone Valves VG000 Series High-apacity/High-loseoff Electric Zone Valves are designed to regulate the flow of water

More information

VAL /4" to 2" Solenoid Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves. Solenoid pilot operated spring return inline valves with nonlocking

VAL /4 to 2 Solenoid Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves. Solenoid pilot operated spring return inline valves with nonlocking 1/4" to 2" Solenoid Pilot ctuated VLVES High flow - Cv of 1.2 to 49.5 Durable, robust construction 1/4" to 2" ports (SPP, PTF, or ISO Rc threads) Wide range of voltages available Four functional types:

More information

ACCESSORIES FOR AIR VALVES & AIR SYSTEMS

ACCESSORIES FOR AIR VALVES & AIR SYSTEMS ACCESSORIES FOR AIR VALVES & AIR SYSTEMS BULLETIN ACC-2000R AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 CERTIFIED FOOT GUARDS Page 8 QUICK EXHAUST & ELECTRIC QUICK EXHAUST VALVES Pages 6 & 7 SHUTTLE VALVES

More information

Flow Limit Safety Shutoff Valves Model 1

Flow Limit Safety Shutoff Valves Model 1 Flow Limit Safety Shutoff Valves Model 1 Model 1 Series flow limit safety shutoff valves automatically shutoff all flow from the cylinder when flow exceeds a factory preset level. The Model 1 is normally

More information

hydraulic power clamps

hydraulic power clamps hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475

More information

hydraulic power clamps

hydraulic power clamps ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4

More information

VB-7000 Series 1/2 to 2 Globe Valves

VB-7000 Series 1/2 to 2 Globe Valves V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe

More information

Lockout Valves. Section C. Pneumatic

Lockout Valves. Section C. Pneumatic Lockout Valves Section LV Series Basic Features... Applications... Mounting... Dimensions... LV Series Technical Information Operation... Specifications... Ordering Information... EZ Series Basic Features...4

More information

Control Reliable Double Valves with Total Dynamic Monitoring & Complete Memory

Control Reliable Double Valves with Total Dynamic Monitoring & Complete Memory Control Reliable Double Valves Safety Exhaust (Dump) DM Series D Self Monitored - Clutch/rake Control asic Size,,, and 0 Dynamic Monitoring With Complete Memory: Memory, monitoring, and air flow control

More information

APCO CVS-6000/6000A SWING CHECK VALVES

APCO CVS-6000/6000A SWING CHECK VALVES ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,

More information

Winslow Lube Oil Full-Flow Type 1 Filter Service Instructions

Winslow Lube Oil Full-Flow Type 1 Filter Service Instructions Vent Plug (NPT) Winslow Lube Oil ull-low Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on

More information

Poppet Series Compressed Air & Vacuum

Poppet Series Compressed Air & Vacuum Poppet Series ompressed ir & Vacuum www.asco.com Table of ontents Poppet eatures and enefits ow to Order N Series - ompressed ir Valve Solenoid ir Pilot ctuated /8" to /8" Technical ata /8" to /8" imensions

More information

Solenoid Pilot Actuated Valves

Solenoid Pilot Actuated Valves Solenoid Pilot ctuated Valves 02 Series irectional ontrol Valve www.asco.com Table of ontents 02 Series Features and enefits Performance ata How to Order Sandwich Option Kit 9 Speed ontrol Kit 9 Shut

More information

Quick Coupling Products

Quick Coupling Products Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER

More information

Pneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options

Pneufit Inch Series Push-In Tube Fittings 1/8 to 1/2 Tube Sizes UNF to 1/2 NPT Thread Options Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3

More information

Pressure Instrument Testing Equipment

Pressure Instrument Testing Equipment Pressure Instrument Testing Equipment BULLETIN TE-1 A Halliburton Company A Durable, Portable Primary Standard Model 1305D Deadweight Tester The Ashcroft 1305D Deadweight Tester is an affordable, portable

More information

G6125C, 2-Way, Pressure Compensated Flanged Globe Valve

G6125C, 2-Way, Pressure Compensated Flanged Globe Valve G6125, 2-ay, Pressure ompensated langed Globe Valve pplication This valve is typically used in large air handling units on heating or cooling coils. This valve is suitable for use in a hydronic system

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.

More information

501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities

501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities 501 Series irectional ontrol Valve Platform Featuring Higher Flow in a ompact Valve Package ommissioning apabilities Solenoid air pilot actuated Low wattage.8 wall for application solenoids Polarity insensitive

More information

WDV-2 2-way normally closed poppet with air pilot. When valve closes a spring biased internal piston draws back a small volume on outlet side (approx.

WDV-2 2-way normally closed poppet with air pilot. When valve closes a spring biased internal piston draws back a small volume on outlet side (approx. PV-1 MPS-2P SPECIALTY COMPONENTS Miniature pulse valve, a normally open 3-way valve that closes shortly after being pressurized and remains closed until supply pressure is exhausted and repressurized.

More information

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300 ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality

More information

PVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59

PVL Series. Solenoid & Remote Pilot Operated 1/8 & 1/4 Valves. Section C.   C59 Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &

More information

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508 Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.

More information

Mechanical Style Pressure Switch. Specifications

Mechanical Style Pressure Switch. Specifications or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202

More information

Pneumatic Quick Couplings

Pneumatic Quick Couplings Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single

More information

Pressure Control Valves. General Description. Specifications. Ordering Information

Pressure Control Valves. General Description. Specifications. Ordering Information Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure

More information

Couplings - Quick Disconnect

Couplings - Quick Disconnect ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial

More information

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold

More information

2/2-way servo assisted Solenoid Valve

2/2-way servo assisted Solenoid Valve 62 2/2-way servo assisted Solenoid Valve Forced coupled diaphragm system ompact body from brass or stainless steel igh flow rate (v value) nti-waterhammer, low noise Type 62 can be combined with... Type

More information

Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT

Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem

More information

Low shear, low pulsation performance delivers superior finish quality

Low shear, low pulsation performance delivers superior finish quality TRITON 3:1 irculating Pumps TRITON 13HP 23375 & 233751 TRITON 38HP 23385 & 233816 Low shear, low pulsation performance delivers superior finish quality FETURES ND ENEFITS Low pulsation output provides

More information

Pneumatic Connectors, Tubing & Cylinder Control Accessories

Pneumatic Connectors, Tubing & Cylinder Control Accessories Pneumatic Pneumatic onnectors, Tubing & ylinder ontrol ccessories 290 G-ca Index Page No Push-in Fittings Overview.3 -.7 Push-in Fittings.8 -.22 Push-in Fitting Dimensions.23 -.47 ylinder ontrol ccessories

More information

Hydraulic Systems Hydraulic Clamping

Hydraulic Systems Hydraulic Clamping ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11

More information

FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003

FLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL

More information

Self-Acting Temperature Control Valve

Self-Acting Temperature Control Valve GLOE & NEELE Northeast ontrols Inc. Tel: 8454183435 Fax: 8455952471 www.dwyerstore.com Selfcting Temperature ontrol Valve Require No External Power Selfcting Temperature ontrol Valves require no external

More information

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure

More information

Air Valve AIR-PILOTED VALVES

Air Valve AIR-PILOTED VALVES K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without

More information

HOKE. Needle. Valves. Union Bonnet. Severe Service. Needle DYNA-PAK STEM PACKING SYSTEM PROCHEM INSTRUMENTATION HOKE INSTRUMENTATION VALVES

HOKE. Needle. Valves. Union Bonnet. Severe Service. Needle DYNA-PAK STEM PACKING SYSTEM PROCHEM INSTRUMENTATION HOKE INSTRUMENTATION VALVES PROHM INTRUMNTTION HOK INTRUMNTTION VLV HOK Needle Valves Needle evere ervice Union onnet HOK valves are available with GYROLOK compression fitting ends HOK manufactures a complete line of precision needle

More information

Valves. E Valves. Multiple Hydraulic System Applications

Valves. E Valves. Multiple Hydraulic System Applications s Multiple Hydraulic System Applications Parker Check s are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. Offered

More information

ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H

ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8 Port zpv02 A B C D E F G H. Section H X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /

More information

Piston Accumulators Series Catalog /USA Page

Piston Accumulators Series Catalog /USA Page atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring

More information

Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT

Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT ir ctuated 3-Way all Valves -Port rass, Standard Port 1/4 to 3 SERIES eatures Spring Return or ouble cting Standard Port 3-way flow path irect mount brass valve using standard ISO5211 ctuators designed

More information

ROTORK FAIRCHILD MODEL T7500 LOW PRESSURE TRANSDUCER Installation, Operation and Maintenance Instructions

ROTORK FAIRCHILD MODEL T7500 LOW PRESSURE TRANSDUCER Installation, Operation and Maintenance Instructions ROTORK FIRHIL MOEL T7500 LOW PRESSURE TRNSUER Installation, Operation and Maintenance Instructions Introduction The T7500 series low pressure transducer is a precision low pressure electropneumatic transducer

More information

Optimize Performance and Simplify Installation

Optimize Performance and Simplify Installation ccessories F1 c c e s s o r i e s Introduction Optimize Performance and Simplify Installation Simplify Nozzle Mounting and Positioning Split-eyelet connectors djustable ball fittings djustable hoses and

More information