LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm

Size: px
Start display at page:

Download "LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm"

Transcription

1 LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum material. Aluminum alloy is water tolerant - anodization is not required for high water based fluids (HWBF). RF filters are constructed of ductile iron. Non-welded housing design reduces stress concentrations and prevents fatigue failure. Inlet/outlet port options include NPT, SAE straight thread O-ring boss, and SAE 4-bolt flange to allow easy installation without costly adapters. O-ring seals are used to provide positive, reliable sealing. Choice of O-ring materials (nitrile rubber, fluorocarbon elastomer, ethylene propylene rubber) provides compatibility with petroleum oils, synthetic fluids, water-glycols, oil/water emulsions, and high water base fluids. Bolt-on lid requires minimal clearance for removal. Reusable contamination basket prevents loss of retained contaminants into the reservoir during element replacement. Single piece casting provides rigidity for inline or in-tank mounting. Note: This filter is configured with an... R... type (return/low pressure) element, so if the filter requires a bypass, the bypass is located in the closed end cap of the cartridge element. Applications Agricultural Automotive Construction Gearboxes Industrial Steel / Heavy Industry Technical Specifications Mounting Method 4 Mounting holes - filter housing Port Connections Inlet / Outlet 3 6/11 16/ B ½ Threaded /.71 Dia Smooth SAE-12 / SAE-12; 3/4 NPT / SAE-12 SAE-2 / SAE-2; 1 1/4 NPT (with adapter) / SAE-2 SAE-2 / 2 NPT (with flange port adapter) 2 Threaded (NPT/BSPP/SAE) / same as inlet 2 SAE Flange, Code 61 / 2 NPT 3 SAE Flange, Code 61 / 3 NPT 3 SAE Flange, Code 61 / 3 SAE Flange, Code /2 SAE Flange, Code 61 / 3-1/2 SAE Flange, Code 61 4 SAE Flange, Code 61 / 4 SAE Flange, Code 61 Direction of Flow Inlet: Side Outlet: bottom Materials of Construction Flow Capacity Housing Pressure Rating Max. Allowable Working Pressure* Fatigue Pressure Housing Polyamide Aluminum Ductile Iron 8 gpm (3 lpm) 16 gpm (6 lpm) 29 gpm (11 lpm) 42 gpm (16 lpm) 63 gpm (24 lpm) 87 gpm (33 lpm) 174 gpm (66 lpm) 251 gpm (95 lpm) 343 gpm (13 lpm) Burst Pressure 3 6/11 16/ Element Collapse Pressure Rating ON, W/HC, ECON2, BN4AM, P/HC, AM V Fluid Temp. Range Lid Polyamide Aluminum Ductile Iron 36 psi (25 bar); (size psi, 1 bar) 478 psi (33 7, cycles; 58 psi (4 bar) 18 psi (75 bar) 123 psi (85 bar) 144 psi (1 bar) 345 psi (21 bar) 29 psid (2 bar) 145 psid (1 bar) 435 psid (3 bar) 14 F to 212 F (-1 C to 1 C) Consult HYDAC for applications below 14 F (-1 C) Fluid Compatibility Compatible with all hydrocarbon based, synthetic, water glycol, oil/water emulsion, and high water based fluids when the appropriate seals are selected. Indicator Trip Pressure P = 29 psi (2 bar) -1% (standard) P = 72 psi (5 bar) -1% (optional) Bypass Valve Cracking Pressure P = 43 psid (3 bar) +1% (standard) P = 87 psid (6 bar) +1% (optional) *Note: All RF Filters MAWP reduce to 7 bar (11.5 psi) when using the following VMF and VR indicators: B, BM, E, ES, GC, LE, LZ. PN# / 3.16 / FIL

2 Model Code Filter Type RF = Return Line Filter Element Media ON = Optimicron BN/AM = Betamicron /Aquamicron ECON2 = ECOmicron AM = Aquamicron W/HC = Wire Mesh P/HC = Polyester V = Metal Fiber Size 3, 6, 11, 16, 24, 33, 66, 95, 13 Pressure Rating B = 145 psi (1 bar) (size 3 only) D = 36 psi (25 bar) V = 11.5 psi (7 bar) when using following VR indicators: B, BM, E, ES, GC, LE, LZ Type of Connection B = 1/2 Threaded (size 3 - NPT / BSPP inlet/.71 Outlet) C = 3/4 Threaded (sizes 6, 11 - NPT / BSPP inlet/3/4 SAE Outlet) E = 1 1/4 Threaded Inlet (SAE/NPT) / 1 1/4 threaded outlet (sizes 16-24) or 2 NPT outlet (size 33) G = 2 Threaded (size 33 - NPT / BSPP / SAE Inlet / Outlet - same as inlet) L = 2 SAE 32 Flange Inlet / 2 NPT Outlet (size 33) M = SAE 48 Flange Inlet / SAE 48 Flange Outlet (size 66) N = SAE 48 Flange Inlet / 3 NPT Outlet (size 66) O = SAE 56 Flange (size 95) - Inlet & Outlet P = SAE 64 Flange (size 13) - Inlet & Outlet Filtration Rating (micron) 1, 3, 5, 1, 15, 2 = ON 3, 1 = BN/AM 3, 5, 1, 2 = ECON2 4 = AM 25, 5, 74, 1, 149, 2 = W/HC 1, 2 = P/HC 3, 5, 1, 2 = V Type of Static or P Clogging Indicator A, B, BM, C, D, E, LE (Others available upon request) Type Number 1 = Standard Connection Modification Number (latest version always supplied) Inlet Port Configuration = BSPP Straight Thread (sizes 3-33) 3 = NPT (sizes 3-33) 12 = SAE Straight Thread Inlet/Outlet Connections (sizes 6, 11, 16, 24, 33 only) 16 = SAE Flange Code 61 Inlet Connections (sizes 33-13) LOW PRESSURE FILTERS RF ON 33 D L 1 C 1. X / 16 - V - B6. Seals (omit) = Nitrile rubber (NBR) (standard) V = Fluorocarbon elastomer (FKM) EPR = Ethylene propylene rubber (EPR) Bypass Valve (omit) = 43 psid (3 bar) (standard) B1 = 14.5 psid (1 bar) (lube or coolant) B6 = 87 psid (6 bar) (return line extended life) B2 = 29 psid (2 bar) KB = No Bypass (flushing systems) not available with ECON2 Supplementary Details SO263 = Modification of ON and W/HC elements for Skydrol or HYJET phosphate ester fluids L24, L48, L11, L22 = Lamp for D-type clogging indicator (LXX, XX = voltage) DE = P Indicator - For in-line applications (sizes 66, 95, 13) T = With tank breather (size 3 only) W = Modification of V elements for use with oil water emulsions (HFA) and water polymer solutions (HFC) SFREE = Element specially designed to minimize electrostatic charge generation Replacement Element Model Code 33 R 1 ON / V B6. Size 3, 6, 11, 16, 24, 33, 66, 95, 13 Filtration Rating (micron) 1, 3, 5, 1, 15, 2 = ON 3, 1 = BN4AM 3, 5, 1, 2 = ECON2 4 = AM 25, 5, 74, 1, 149, 2 = W/HC 1, 2 = P/HC 3, 5, 1, 2 = V Element Media ON, ECON2, BN4AM, AM, P/HC, W/HC, V Seals (omit) = Nitrile rubber (NBR) (standard) V = Fluorocarbon elastomer (FKM) EPR = Ethylene propylene rubber (EPR) Bypass Valve (omit) = 43 psid (3 bar) (standard) B6 = 87 psid (6 bar) B1 = 14.5 psid (1 bar) KB = no bypass B2 = 29 psid (2 bar) Supplementary Details SO263 = (same as above) W = (same as above) SFREE = (same as above) NPT available with Adapter (to size 24) Clogging Indicator Model Code VR 5 C. X /. Indicator Prefix VR = Return Filters VM = P G 1/2 Indicator (sz. 66+, w/de opt.) VD = P LE Indicator (sz. 66+, w/de opt.) Trip Pressure 2 = 29 psid (2 bar) (return filters) 5 = 72 psid (5 bar) (optional) Type of Indicator A = No indicator, plugged port B = Pop-up indicator (auto reset - static only) BM = Pop-up indicator (manual reset) C = Electric switch - SPDT D = Electric switch and LED light - SPDT E = Visual pressure gauge LE = Electric switch and pop-up Modification Number Supplementary Details Seals (omit) = Nitrile rubber (NBR) (standard) V = Fluorocarbon elastomer (FKM) EPR = Ethylene propylene rubber (EPR) Light Voltage (D type indicators only) L24 = 24V L48 = 48V L11 = 11V L22 = 22V (For additional details and options, see Section G - Clogging Indicators.) Model Codes Containing RED are non-stock items Minimum quantities may apply Contact HYDAC for information and availability PN# / 3.16 / FIL D3

3 LOW PRESSURE FILTERS Dimensions RF 3 (No Breather) RF 3 T (With Breather) Breather [3.54] 9 Clearance required for element removal Static Indicator port PORT 1/2" Threaded 1/2" Threaded PORT [.71] 18 ID Smooth Front View Hole drilled in tank top only with RF3 including breather [.2] 5 (Uses M4 bolt) [3.7] 78 [2.36] 6 Tank opening Mounting Pattern Size 3 Weight (lbs.).9 Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. D4 PN# / 3.16 / FIL

4 Dimensions RF 6-24 LOW PRESSURE FILTERS RF6/11 [3.78] 96 RF16/ RF6/11 [2.17] 55 RF16 RF24 [2.83] [2.83] RF6/11 [3.23] 82 RF16/ [.41] RF 6/ [1.38] RF16/ Static indicator port Adapter (For NPT Filters) RF 6/11 3/4" NPT (25439) RF 16/24 11/4" NPT (254389) RF6 RF11 RF16 RF24 [3.15] [5.71] [4.72] [7.9] Clearance required for element removal RF6/11 3/4" Threaded SF16/24 1 1/4" Threaded RF6/11 [1.73] 44 RF16/24 [2.13] 54 RF6/11 RF6 [3.94] [6.54] RF16/24 RF11 [4.72] [9.17] RF16 [8.23] RF6 RF11 [2.6] [5.24] RF24 [1.63] RF16 [3.5] RF24 [5.91] RF6/11 3/4" Threaded RF16/24 1 1/4" Threaded D3 D1 D2 Size ød1 ød2 ød3 Bolts 6 / / (8mm) 4.17 (16mm) 3.94 (1mm) 5.32 (135mm).26 (6.5mm).3 (7.5mm) M5 M6 Mounting Pattern Size Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. PN# / 3.16 / FIL D5

5 LOW PRESSURE FILTERS Dimensions RF 33 RF 33 / RF 33 /12 (1 1/4") [7.9] 18 Clearance required for element removal Static Indicator Port Flange Adapter 2" SAE Code 61 TO SAE-2 1 1/4" Straight Thread 1 5/8-12UN-2B SAE-2 Static Indicator Port /2-13UNC X DP " NPT 2" SAE Flange Code 61 2" NPT RF 33 /12 (2") Mounting Pattern.35 9 Uses M8 Bolts 2 1/2-12UN-2B SAE Static Indicator Port Size 33 Weight (lbs.) 9. 2" NPT Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. D6 PN# / 3.16 / FIL

6 Dimensions RF 66 LOW PRESSURE FILTERS Static Indicator Port [12.6] 32 Clearance required for element removal 3" SAE Flange Code /8"-11UNC-2B X 28 DP P Indicator Port - "DE" Option " NPT (Uses M12 Bolts) BOTTOM VIEW RF..66DN /8"-11UNC-2B X DP Mounting Pattern " SAE Flange Code 61 BOTTOM VIEW RF..66DM Size 66 Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. PN# / 3.16 / FIL D7

7 LOW PRESSURE FILTERS Dimensions RF RF RF13 [5.71] 145 RF95: [15.16] 385 RF13: [19.9] 485 Clearance required for element removal Static Indicator Port RF95: 5/8"-11UNC-2B X RF13: 5/8"-11UNC-2B X RF95: 3 1/2" SAE Flange Code 61 RF13: 4" SAE Flange Code 61 RF95: RF13: [3.6] DP DP RF95: RF13: [5.13] 13.2 RF95: [9.92] 14 RF13: [13.2] 33 RF95: RF13: [4.76] 121 RF95: RF13: [1.91] 277 RF95: RF13: [23.92] 67.5 P Indicator Port - "DE" Option RF95: 3 1/2" SAE Flange Code 61 RF13: 4" SAE Flange Code 61 RF95: RF13: [5.13] 13.2 RF95: RF13: [3.6] /8"-11UNC-2B X 2 DP Mounting Pattern Uses M16 Bolts Size Weight (lbs.) Dimensions shown are [inches] millimeters for general information and overall envelope size only. Weights listed include element. For complete dimensions please contact HYDAC to request a certified print. D8 PN# / 3.16 / FIL

8 Sizing Information LOW PRESSURE FILTERS Total pressure loss through the filter is as follows: Assembly P = Housing P + Element P Housing Curve: Pressure loss through housing is as follows: Actual Specific Gravity Housing P = Housing Curve P x.86 Adjustments must be made for viscosity & specific gravity of the fluid to be used! (see Sizing HYDAC Filter Assemblies in Section B - Overview) RF 3 HOUSING RF 6/11 HOUSING RF 16/24 HOUSING RF 33 HOUSING RF 66 HOUSING RF 95/13 HOUSING PN# / 3.16 / FIL D9

9 LOW PRESSURE FILTERS Element K Factors Actual Viscosity (SUS) x Actual Specific Gravity P Elements = Elements (K) Flow Factor x Flow Rate (gpm) x (From Tables Below) 141 SUS.86 Optimicron R ON Size 1 µm 3 µm 5 µm 1 µm 15 µm 2 µm 3 R XXX ON R XXX ON R XXX ON R XXX ON R XXX ON R XXX ON R XXX ON R XXX ON R XXX ON ECOmicron...R...ECON2 Size 3 μm 5 μm 1 μm 2 μm 16 R XXX ECON R XXX ECON R XXX ECON R XXX ECON R XXX ECON R XXX ECON Betamicron/Aquamicron R BN4AM Size 3 µm 1 µm 33 R XXX BN4AM R XXX BN4AM R XXX BN4AM R XXX BN4AM Aquamicron R AM Size 4 µm 33 R 4 AM R 4 AM R 4 AM R 4 AM.26 Wire Mesh R W/HC Size 25, 5, 74, 1, 149, 2 µm 3 R XXX W/HC.67 6 R XXX W/HC R XXX W/HC R XXX W/HC R XXX W/HC.7 33 R XXX W/HC R XXX W/HC.4 95 R XXX W/HC.3 13 R XXX W/HC.2 Polyester...R...P/HC Size 1 μm 2 μm 3 R XXX P/HC R XXX P/HC R XXX P/HC R XXX P/HC R XXX W/HC R XXX W/HC R XXX W/HC R XXX W/HC R XXX W/HC.4.2 S.S. Wire Mesh "R" R V US UNITS Size 3 μm 5 μm 1 μm 2 μm 3 R XXX V R XXX V R XXX V R XXX V R XXX V R XXX V R XXX V R XXX V R XXX V All Element K Factors in psi / gpm. D1 PN# / 3.16 / FIL

10 Notes LOW PRESSURE FILTERS PN# / 3.16 / FIL D11

LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm

LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight

More information

HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm

HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm Hydraulic Symbol DFF FILTER REVERSE FLOW CIRCUIT Bypass Valve Filter Element Pop-up Indicator Features Available in T ported

More information

MEDIUM PRESSURE FILTERS

MEDIUM PRESSURE FILTERS Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal

More information

HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm

HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm Hydraulic Symbol or DFFX FILTER REVERSE FLOW CIRCUIT P Indicator Reverse Flow Valve BY-PASS

More information

HYDRAULIC AND LUBE OIL FILTERS RFM Series

HYDRAULIC AND LUBE OIL FILTERS RFM Series HYDRAULIC AND LUBE OIL FILTERS RFM Series Low Pressure In-Tank Return Line Filters psi up to gpm Technical Details Mounting Method 7/9///8 mounting holes - filter housing Features The compact and lightweight

More information

Low Pressure Filters

Low Pressure Filters Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 6-8 www.cmafh.com RFM Series In-Tank Return Line Filters Features The compact and lightweight design make

More information

Low Pressure Filters

Low Pressure Filters In-Tank Return Line Filters PSI up to GPM Hydraulic Symbol: INLET INLET Bypass Valve Pop-up Breather Bypass Valve Pop-up TANK OUTLET TANK OUTLET TANK OUTLET Features: The compact and lightweight design

More information

HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm

HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm HIGH PRESSURE FILTERS HF4P Series Inline Filters 5000 psi up to 120 gpm Hydraulic Symbol A B Features Meets HF4 automotive standard Non-welded housing design reduces stress concentrations and prevents

More information

LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM

LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice

More information

LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM

LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with

More information

MEDIUM PRESSURE FILTERS MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol

MEDIUM PRESSURE FILTERS MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol MFX Series Inline Filters 725 psi up to 35 gpm Hydraulic Symbol A B Features Eco-friendly, cost-effective alternative to spin-on filters Integrated retrofit protection Longer service life of the filter

More information

Low Pressure Filters

Low Pressure Filters MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation

More information

Series RFL In-Line Filter

Series RFL In-Line Filter APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,

More information

Series RFLD Duplex In-Line Filter

Series RFLD Duplex In-Line Filter APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.

More information

Duplex Pressure Filters

Duplex Pressure Filters Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 45 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS APPLICATION HIGH PRESSURE FILTERS For Manifold Block Side Mounting Series DF...QE Pressures to 4 psi Flows to 18 gpm HYDAC DF...QE High Pressure Filters are designed to be side mounted directly onto the

More information

HIGH PRESSURE FILTERS Series HF2P

HIGH PRESSURE FILTERS Series HF2P HIGH PRESSURE FILTERS Series HF2P Pressures to 3000 psi Flows to 25 GPM Port Size 3/4 APPLICATION HYDAC HF2 Inline High- Pressure Filters are designed for use on hydraulic power units, machine tools, plastics,

More information

HIGH PRESSURE FILTERS

HIGH PRESSURE FILTERS APPLICATION HIGH PRESSURE FILTERS For Manifold Block Mounting Series DF...P Pressures to 4 psi Flows to 18 gpm HYDAC DF...P High Pressure Filters are designed to be mounted directly onto the manifold block

More information

NFH Low Pressure Filters

NFH Low Pressure Filters PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,

More information

FILTER ELEMENTS. Overview of Elements PN# / / FIL

FILTER ELEMENTS. Overview of Elements PN# / / FIL Overview of Elements C1 Overview of Elements Optimicron Elements ON - code designation Glass fiber, multi-layered with support Collapse rating - 29 psid (2 bar) 1, 3, 5, 1, 15, 2 micron Filtration Rating

More information

Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron

Inline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500

More information

SPIN-ON FILTERS & ELEMENTS

SPIN-ON FILTERS & ELEMENTS ABSOLUTE RATED (BETA SPIN ) & NOMINAL RATED SPIN-ON FILTERS & ELEMENTS Single and Twin Element Models Pressures to 20 psi Flows to 120 gpm APPLICATION HYDAC Spin-On Filters are for filtration of hydraulic

More information

Return Line Filter RF

Return Line Filter RF HYDAC return line filters type RF are designed to be mounted directly on tank tops. Inline mounting is also possible. Return Line Filter RF Flow rates up to 5, l/min Pressure range up to 25 bar Material:

More information

NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports

NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection

More information

PRESSURE FILTERS FOR MODULAR STACKING. Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICATION PRODUCT FEATURES FILTER ELEMENTS

PRESSURE FILTERS FOR MODULAR STACKING. Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICATION PRODUCT FEATURES FILTER ELEMENTS PRESSURE FILERS FOR MODULAR SACKING Series DF-Z Pressures to 4500 psi Flows to 10 gpm APPLICAION DF...Z Pressure filters are designed for modular stacking and can be mounted directly to the component to

More information

Inline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01.

Inline Filter RFLD. Change-Over. Cast Version Flow Rates up to 1300 l/min* Pressure Range 25/40/64 bar With Ball Change-Over Valve E /01. Change-Over Inline Filter RFLD Cast Version Flow Rates up to 3 l/min* Pressure Range 25/4/64 bar With Ball Change-Over Valve * For higher flow rates, please refer to brochure RFLD Welded Version E 7.9.2/.4

More information

Return Line Filter RFM with 4-Hole Mounting

Return Line Filter RFM with 4-Hole Mounting Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction

More information

Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure

Inline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction

More information

Return Line Filter RF

Return Line Filter RF Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings

More information

Return Line Filter RFM with 4-Hole Mounting

Return Line Filter RFM with 4-Hole Mounting Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction

More information

HMK05/25 DURAMAX Spin-Ons

HMK05/25 DURAMAX Spin-Ons 100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)

More information

Change-Over Inline Filter RFLD Welded Version

Change-Over Inline Filter RFLD Welded Version Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed

More information

Inline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar

Inline Filter RFL. Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar RFL inline filters are designed for inline mounting in hydraulic and lubrication systems. Inline Filter RFL Cast version Volume rates up to 1300 l/min* Pressure range 25/40 bar * For larger flow rates,

More information

Filters. DFFH & DFFHM Series Service and Parts. Index. This symbol is followed by user tips and particularly useful information

Filters. DFFH & DFFHM Series Service and Parts. Index. This symbol is followed by user tips and particularly useful information 142.9 INLET 1.38 35 OUTLET Index 1.25 31.8 1. General 1.4 Tools Required for Maintenance 1.5 Torque Requirements 2. Maintenance 3. Changing the Element 4. Spare Parts List 5. Replacement Element Model

More information

Stainless Steel Pressure Filters Housings, Elements, Indicators & Sizing

Stainless Steel Pressure Filters Housings, Elements, Indicators & Sizing Stainless Steel Pressure Filters Housings, Elements, Indicators & Sizing TABLE OF CONTENTS Page: MPSSF / HPSSFH / ACSSF Series.....2 VDHA Series...8 ACSSFH-1035...10 EDFR Series....12 EMLF Series....14

More information

FPK02 In-Line Cartridge Filters

FPK02 In-Line Cartridge Filters HIGH PRESSURE FILTERS FPK2 Max Flow: gpm (9 lpm) FPK2 In-Line Cartridge Filters Working Pressures to: Rated Static Burst to: Flow Range to: 69 psi 42, kpa 42 bar 913 psi 63, kpa 63 bar gpm 9 lpm Features

More information

FPK04 Max Flow: 100 gpm (379 lpm)

FPK04 Max Flow: 100 gpm (379 lpm) HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 4350 psi 30,015 kpa 300 bar Rated Static Burst to: Flow Range To: 9135 psi 63,000 kpa 630 bar 100 gpm 379 lpm Features The T-type ported

More information

Change-Over Inline Filter RFLD Weld Version

Change-Over Inline Filter RFLD Weld Version Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed

More information

Filters. RFD Series. Change-Over Return Line Filter Service and Parts. 2. Element Replacement. 2.1 Element Removal

Filters. RFD Series. Change-Over Return Line Filter Service and Parts. 2. Element Replacement. 2.1 Element Removal 1. Maintenance Filters Series Change-Over Return Line Filter Service and Parts up to 343 gpm (1300 l/min), up to 362 psi (420 bar) 1.1 General Please follow the maintenance instructions. 1.2 Installation

More information

LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.

LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm. HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304

More information

RFL Cast Series Service and Parts

RFL Cast Series Service and Parts Filters RFL Cast Series Service and Parts up to 343 gpm (1300 l/min), up to 580 psi (40 bar) 1. Maintenance 1.5 Torque Values 2. Element Replacement 1.1 General Please follow the maintenance instructions.

More information

HPK04 Max Flow: 120 gpm (454 lpm)

HPK04 Max Flow: 120 gpm (454 lpm) HIGH PRESSURE FILTERS In-Line Cartridge Filters Working Pressures to: 6000 psi 41,380 kpa 413.8 bar Rated Static Burst to: Flow Range To: 17000 psi 117,300 kpa 1173 bar 120 gpm 454 lpm Features The high

More information

Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS

Low Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters

More information

DF, DFF & DFFX Series Service and Parts

DF, DFF & DFFX Series Service and Parts Filters DF, DFF & DFFX Series Service and Parts up to 528 gpm (2000 l/min), up to 6000 psi (420 bar) 1. Maintenance General Please follow the maintenance instructions. 1.2 Installation Before installing

More information

MDF Series Service and Parts

MDF Series Service and Parts Filters MDF Series Service and Parts up to 92 gpm (350 l/min), up to 4000 psi (280 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter

More information

Filters. DFP, DFPF Series. 2. Element Replacement. 2.1 Element Removal

Filters. DFP, DFPF Series. 2. Element Replacement. 2.1 Element Removal Filters DFP, DFPF Series Manifold Mounted/Reverse Flow Option Service and Parts up to 158 gpm (600 l/min), up to 4500 psi (315 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions.

More information

Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts

Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts Filters Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts up to 747 gpm (10400 l/min), up to 360 psi (5 bar) 1. Maintenance General Please follow the maintenance

More information

Stainless Steel Pressure Filters

Stainless Steel Pressure Filters Stainless Steel Pressure Filters Inline Filters up to 26,000 PSIG up to 35 GPM Description Process Filtration MPSSF / HPSSF/ ACSSF Series The pressure filters consist of two main sections: the filter head

More information

LF & LFF Series Service and Parts

LF & LFF Series Service and Parts Filters LF & LFF Series Service and Parts up to 174 GPM(660 l/min), up to 1500PSI(100bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter

More information

Return Line Filter HF4R up to 450 l/min, up to 10 bar

Return Line Filter HF4R up to 450 l/min, up to 10 bar Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.

More information

Fluid Cooling Industrial COLW Series

Fluid Cooling Industrial COLW Series Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned

More information

LPF Series Service and Parts

LPF Series Service and Parts Filters LPF Series Service and Parts up to 140 GPM(280 l/min), up to 1000PSI(50bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter

More information

15/40/80CN Series Coreless Medium Pressure Filters

15/40/80CN Series Coreless Medium Pressure Filters //8CN Series Coreless Medium Pressure Filters 89 //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment

More information

Medium Pressure Filters

Medium Pressure Filters Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax

More information

Moduflow. ILP and RFP Low Pressure Filters. Series

Moduflow. ILP and RFP Low Pressure Filters. Series Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile

More information

Medium Pressure Filters

Medium Pressure Filters Medium Pressure Filters Medium pressure filters can be used in applications up to 2 psi (1379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters MEDIUM PRESSURE

More information

Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.

Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /. BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic

More information

HFM Series Service and Parts

HFM Series Service and Parts Filters HFM Series Service and Parts up to 37 gpm (140 l/min), up to 5800 psi (400 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter

More information

LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf

LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf LF(M) High Viscosity Filter Assemblies Low pressure filter assemblies optimized for high flow hydraulic, high viscosity lube and heavily contaminated fuel applications. Max Operating Pressure: 150 psi

More information

NF, NF UHE, NFD UHE & NF MMP with 2600 R element (for Ecomicronfit ( D) element version, see NF 1314/2614 Eco-Fit Series) Service and Parts

NF, NF UHE, NFD UHE & NF MMP with 2600 R element (for Ecomicronfit ( D) element version, see NF 1314/2614 Eco-Fit Series) Service and Parts NF Series NF UHE, NFD UHE, & NF MMP refer to schematics below.. Maintenance. General Please follow the maintenance instructions.. Installation Before installing the filter into the system, check that the

More information

10 Hydraulic Filters

10 Hydraulic Filters 1 Hydraulic Filters Introduction.... 1- HF65 Series.... 1-9 HF66 Series.... 1-15 HF67 Series.... 1-21 HF68 Series.... 1-1 Dual Spin-On Assembly.... 1-5 Introduction Hydraulic Filtration Systems Cummins

More information

DFDK Series Service and Parts

DFDK Series Service and Parts Filters DFDK Series Service and Parts up to 158 gpm (600 l/min), up to 4500 psi (315 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter

More information

PT Series Tank Top Filters

PT Series Tank Top Filters Tank Top Filters 9 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits.

More information

IL8 Series. Medium Pressure Filters

IL8 Series. Medium Pressure Filters Medium Pressure Filters Applications for IL8 series filters Lube oil systems Power generation plants Test stands Primary metal equipment Pulp & paper equipment Offshore drilling and oil patch Flushing

More information

Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel

Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 500 l/min Pressure range up to 315 bar Material: SG Iron/ADI, Steel Manifold Mounted, Rear Flanged Pressure Filters DF...M A / DF...Q E DF...MHA / DF...MHE Flow rates up to 5 l/min Pressure range up to 35 bar Material: SG Iron/ADI, Steel . DESCRIPTION.. FILTER HOUSING

More information

WITH P INDICATOR OPTION INDICATOR POSITION # INDICATOR POSITION # P3000G04=4.0" P3000G08=7.8"

WITH P INDICATOR OPTION INDICATOR POSITION # INDICATOR POSITION # P3000G04=4.0 P3000G08=7.8 D6 P3 SERIES WITH P OPTIO Flows Up To: Port Sizes: Max. Operating Pressure: Application: 3 GPM (114 L/MI) 1 1/16-12 U (SAE-12) 3, PSI (27 BAR) Inline Filtration, External Charge Pump Filtration, High Shock

More information

10 Hydraulic Filters

10 Hydraulic Filters 1 Hydraulic Filters Introduction................................... 1-3 HF65 Series................................. 1-9 HF66 Series................................ 1-15 HF67 Series................................

More information

Filters. HF3P Series Places 60 b c x d DP 4 Places Flange

Filters. HF3P Series Places 60 b c x d DP 4 Places Flange 1/2"-20UNF x 17 2.36 4 Places 60 b 6.42 163 5.23 133 4.53 115 c x d DP 4 Places a 6.30 Filters 160 6.42 163 Flange 2.05 0.24 52 6 P Clogging HF3P Series Indicator Port G 1/2" Service and Parts 6.30 160

More information

Moduflow Series IL2/RF2/CF2 Low Pressure Filters

Moduflow Series IL2/RF2/CF2 Low Pressure Filters IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available

More information

Change-Over Pressure Filter DFDK

Change-Over Pressure Filter DFDK Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING

More information

15/40/80CN Series. Medium Pressure Filters

15/40/80CN Series. Medium Pressure Filters //8CN Series Medium Pressure Filters 7 //8CN Series Applications for CN series Filters Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile

More information

OFFLINE FILTRATION SYSTEMS

OFFLINE FILTRATION SYSTEMS Offline Filtration Systems Today s hydraulic filter systems have seen a shift from reactionary to preventative, and even predictive maintenance. Total system contamination management begins with our Fluid

More information

World Pressure Filters. A New Standard in 7,000 psi Pressure Filters

World Pressure Filters. A New Standard in 7,000 psi Pressure Filters World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration

More information

Filters. HF4R Series. Service and Parts. Index. Inlet. Outlet. ø7 (ø177.8mm) Bolt Circle ø6.25 (ø158.8mm) ø0.44 (ø11.1mm) 4 Places Equally spaced

Filters. HF4R Series. Service and Parts. Index. Inlet. Outlet. ø7 (ø177.8mm) Bolt Circle ø6.25 (ø158.8mm) ø0.44 (ø11.1mm) 4 Places Equally spaced ø7 (ø177.8mm) Clearance Required for Element Removal HF4R-9 10 (254mm) HF4R-18 19 (487mm) HF4R-27 28 (711mm) 2.38 (60.4mm) 4.26 (108.1mm) Filters G 1/2 Indicator Port HF4R Series 1/8 NPT Indicator Port

More information

AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology

AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM

More information

Oil Solutions. GA/BGAH Series Medium Pressure Filters. Global Filtration Technology. Filtration.

Oil Solutions. GA/BGAH Series Medium Pressure Filters. Global Filtration Technology. Filtration. Oil Solutions Medium Pressure Filters Filtration Global Filtration Technology www.oilsolutions.com.au Features/Applications for Medium Pressure Inline Filters GA Series Pressures to 750 PSI Flows to 100

More information

IL8 Series. Medium Pressure Filters

IL8 Series. Medium Pressure Filters Medium Pressure Filters 6 Applications for IL8 series filters Lube oil systems Power generation plants Test stands Primary metal equipment Pulp & paper equipment Offshore drilling and oil patch Flushing

More information

World Pressure Filters A New Standard in 7,000 psi Pressure Filters

World Pressure Filters A New Standard in 7,000 psi Pressure Filters World Pressure Filters A New Standard in 7, psi Pressure Filters 12 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.

More information

50P Series High Pressure Filters

50P Series High Pressure Filters P Series High Pressure Filters 1 P Series Applications for P series filters Automotive specified equipment Hydrostatic transmission circuits Servo and proportional controls Offshore drilling rigs Mining

More information

Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar

Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar 160 240 260 280 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international

More information

RF4 Series. Return Line Filters

RF4 Series. Return Line Filters RF Series Return Line Filters 7 RF Series Applications for RF Filters Mobile Equipment Mining Equipment Industrial Power Units Automotive Specified Equipment The RF is a rugged, industry proven filter

More information

15P/30P Series High Pressure Filters

15P/30P Series High Pressure Filters 1P/P Series High Pressure Filters 124 1P/P Series Applications Saw mills Aircraft ground support equipment Asphalt pavers Hydraulic fan drives Power steering circuits Waste trucks Cement trucks Servo control

More information

OVERVIEW OF RESERVOIR ACCESSORIES

OVERVIEW OF RESERVOIR ACCESSORIES OVERVIEW OF RESERVOIR ACCESSORIES Reservoir Accessories The reservoir of a hydraulic system can be a significant source of contamination. At the same time, the reservoir is an ideal location for correcting

More information

Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04

Inline Filter MFM. Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS / steel E /01.04 Inline Filter MFM Flow rates up to 100 l/min Pressure range up to 280 bar Material: EN-GJS 400-15 / steel 1. TECHNICAL SPECIFICATIONS 1.1. FILTER HOUSING Construction The inline filter consists of a filter

More information

Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF

Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING

More information

Pressure Filter DF...K P, DF...M P, Flange Mounted

Pressure Filter DF...K P, DF...M P, Flange Mounted Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS

More information

Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..

Suction Filter SF/SFM/SFF and Suction Filter Elements S/S.. Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The

More information

Filter Elements. for use in HYDAC filters* Pressure filter. Pressure filter. filter element (DIN 24550) elements. long seam weld

Filter Elements. for use in HYDAC filters* Pressure filter. Pressure filter. filter element (DIN 24550) elements. long seam weld 1. TECHNiCAL SPECIFICATIONS 1.1 Construction As the core of the, it is the element which performs the actual filtration and/or dewatering function in the housing. They consist of several pleated filtration

More information

By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane

By-pass: 1,7 bar (24.6 psi) setting N.B. Cartridge with integrated bypass valve and antidrainback membrane HYDRAULIC FILTRATION Spin-on, tank top return filters Technical Information Pressure: Max working 12 bar (175 psi) (acc. to NFPA T 3.10.17) Burst 20 bar (290 psi) (acc. to NFPA T 3.10.17) Connection Ports:

More information

Coolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications

Coolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.

More information

Filters. HF2P 79.4 Series Service and Parts. Index P Clogging. Indicator Port G 1/

Filters. HF2P 79.4 Series Service and Parts. Index P Clogging. Indicator Port G 1/ 2.05 52 3.39 86 0.24 6 0.84 21.4 P Clogging Filters Indicator Port G 1/2 4.02 102 3.13 HF2P 79.4 Series Service and Parts INLET OUTLET This symbol is followed 3.86 by user tips and particularly useful

More information

CUSTOM CLAMPS. Head Bolt Arrangements. Model Code B3-5 A1 B1 A1HB B1HB S1 HRSGBLPU 30 A1 373 ST

CUSTOM CLAMPS. Head Bolt Arrangements. Model Code B3-5 A1 B1 A1HB B1HB S1 HRSGBLPU 30 A1 373 ST Head Bolt Arrangements CUSTOM CLAMPS A1 B1 A1HB B1HB S1 Parts Legend 1 Hex Head Bolt 2 Socket Head Bolt 3 Steel Band 4 Band Profile 5 Swivel Sleeve 6 Hex Head Nut 7 H-Bolt 8 Locking Sleeve Series HRGBLPU

More information

Low & High Pressure ProGuard Filters

Low & High Pressure ProGuard Filters 56 ±.2 (2.2 ±.5) ø13 +1.5 (5.12 +.6 ) INDICATOR PLUG 193 (7.6) 14 (5.51) 95 (3.74) LABEL 1 5/8-12UNF IN. OR G 1 1/4 PORT SAE-2 PORT 2 PL'S 196 (7.72) 58 (2.28) ø13.2 (5.13) L (4 Low & High Pressure ProGuard

More information

KLT and KLS Series Tank Top Return Line Filters

KLT and KLS Series Tank Top Return Line Filters KLT and KLS Series Tank Top Return Line Filters 23 KLT/KLS Series Tank Top Return Line Filters Applications for KLT and KLS Filters Mobile Equipment Construction, Refuse Industrial Power Units Machine

More information

Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX

Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X

More information

World Pressure Filters A new standard in 7,000 psi pressure filters

World Pressure Filters A new standard in 7,000 psi pressure filters World Pressure Filters A new standard in 7, psi pressure filters Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.

More information

12S Series High Pressure Filters

12S Series High Pressure Filters High Pressure Filters 168 Applications - Offshore High pressure and aggressive environment - DI Water Water fogging - Food Processing Caustic washdown (poultry, etc.) - Test Stands High pressure Lightweight

More information