Collet Chucks and Collets

Transcription

1 ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding

2 Product Index Short Length ollet hucks & 16 ead Length Power hucks...19 Short Quick hange ollet hucks & 16 ollet hucks...20 Standard ollet hucks... 7 Standard Length ollet hucks..8 5 & 16 ead Length Power hucks...21 R8 ollets...22 Standard Quick hange ollet hucks Extended Length ollet hucks ollets (Imperial) ollets (Metric) ollets (Imperial) ollets (Metric)...26 Multibore ollets, Plain ore...27 Extended Length ollet hucks, IN...12 rawford Multibore ollets...28 Short Length rawback ctuated M ollet huck...13 Multibore ollets, IN (Serrated ore) Hydraulic Table huck E Spring ollets (Imperial) E Spring ollets (Metric)...31 NEW ir Powered ead Length ollet hucks E Spring ollets (Imperial) E Spring ollets (Metric)...33 rawtube dapter Specifications...34 ccuracy harts...35 Page 2

3 ollet hucks and ollets For over 100 years, rawford ollets has been renowned and respected around the world for quality products at competitive prices. s technology advances in the world of machine tools, rawford have continually strived to improve the workholding methods required for accurate and cost effective machining. rawford now offer the ultimate in collet chucking systems to suit most machining applications. The range of collet chucks are manufactured to the highest standards with concentricities between the rear register mounting and the working collet taper to within 0.005mm TIR. The comprehensive range of rawford drawbar chucks has been designed & developed specifically for use on N turning machines. The N range of chucks is available in three different lengths: Short ody which accepts rawford Multibores, also available with a quick change closing cap version for both rawford Multibores and IN 6343 Multibores. Standard ody which accepts either style of Multibore, but also accepts Spring ollets to enable accurate 2nd operation machining, also available with a quick change closing cap. Extended ody which accommodates certain machines longer drawtube standout. This collet chuck accepts either type of Multibore or Spring ollets. This complete range is available in a wide variety of capacities and spindle mountings. Telephone: Page 3

4 new addition to our range is the M rawback ollet huck, which was developed for use with a drawback action to ensure positive location against the feed ram, thus eliminating feed length variations. Short ody accepts either rawford Multibores or the IN 6343 Multibores with a variety of capacities and spindle mountings. Table mounted chuck was designed to be completely self-contained which enables it to be especially suitable for cubotic machining centres. Its unique design also enables full rotation for N rotary table applications. To complement the existing range, rawford now offer ollet hucks which accommodate both the 5 and 16 Spring ollets, thus enabling their utilization on N turning machines. Pullback ollet hucks accept either 5 or 16 ollets in a variety of spindle mountings. eadlength ollet hucks accept either 5 or 16 ollets in a variety of spindle mountings. special Setrite facility can be provided, which enables the user to improve the collet concentricity to virtual zero. Our range of manual collet chucks, include the ever popular Trugrip hucks, which can be fitted directly for turning, milling and grinding operations to an accuracy of 0.015mm TIR at the face. The Trugrip hucks accept either the 5 or 16 ollets in a variety of spindle mountings. Our latest development, features a Pneumatic front mounted eadlength ollet chuck which can be fitted directly for turning, milling and grinding operations to an accuracy of 0.025mm TIR at the face. The Pneumatic hucks accept either 5 or 16 or 173E Spring ollets in a variety of spindle mountings. Page 4

5 Short Length ollet huck ead length operation Ideal for bar work with minimum working envelope ccepts rawford Multibore ollets only type spindle mountings L E J F rawtube dapter Multibore ollet huck Type -42S -54S -54S -66S huck Model No. F325 F757 F327 F941 Mount Mulitibore ollet W-850 V-120 V-120 T-285 apacity Round apacity Hex apacity Square M68 x 1.5 M70 x 1.5 M70 x 2.0 M85 x 2.0 * E F J Maximum RPM rawbar Force (kn) lamping Force (kg) prox. huck Weight 7kg 10kg 12kg 17kg *Note: represents the maximum drawtube thread diameter in conjunction with a drawtube adapter. Telephone: Page 5

6 Short Quick hange ollet hucks ead length operation for rawford or IN Multibore ollets and type mounts Short body design, ideal for bar work with limited working envelope Quick change bayonet cap design saves setup time Models available for both rawford and IN type Multibore collets Large capacity: up to 80mm round ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Hardened and ground main body and cone Speeds up to 6000 rpm type spindle mountings Multibore ollet For Standard Multibore ollets huck Type QS-42 QS-42 QS-54 QS-54 QS-66 QS-80 huck Model No Mount Multibore ollet W-850 W-850 V-120 V-120 T-285 N-175 apacity Round apacity Hex apacity Square E Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 6.8kg 7kg 10kg 14kg 17.7kg 25kg huck Seal Part No huck ap Part No. 2 68G 68G 983G 983G 556G 492G For IN Multibore ollets QS-42 QS-42 QS-60 QS M673 M673 M677 M kg 7kg 10kg 14kg G 428G 142G 142G 1 Each collet size requires a polyurethane chip huck Seal. 2 dditional Quick hange huck aps can be ordered for pre-loading collets and further reducing downtime. Page 6

7 Standard Length ollet hucks ead length operation using rawford Multibore and Spring ollets with type mounts Uses rawford Multibore collets for a powerful parallel grip over a wide diameter range When gripping short components, or where marking of a finished diameter is to be avoided, use a spring collet with a dedicated bore size Large apacity: up to 80mm diameter. ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Hardened and ground main body and cone lso available in IN 6353 straight recess mountings G E J F H L rawtube dapter Multibore ollet Spring ollet huck Type huck Model No. J449 J434 J487 J488 J489 J490 Mount Std Multibore ollet W850 W850 V120 V120 T285 N175 apacity, Round apacity Hex apacity Square Spring ollet M286 M286 N853 N853 K244 L196 apacity Round apacity Hex apacity Square E F M58 x 1.5 M58 x 1.5 M76 x 1.5 M76 x 1.5 M90 x 2.0 M100 x 2.0 G H J L Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 8kg 9kg 13kg 14kg 22kg 34kg IN 6353 Mounts J156 J491 J492 J x x x x 6 T980 W850 V120 T P288 M286 N853 K M35 x 1.5 (Fem) M58 x 1.5 M76 x 1.5 M90 x 2 Refer to O kg 8.6kg 13kg 22kg Telephone: Page 7

8 Standard Length ollet hucks ead length operation for IN standard Multibore, IN type Spring ollets & type mounts Uses IN type Multibore collets for a powerful parallel grip over a wide diameter range. When gripping short components, or where marking of a finished diameter is to be avoided, use IN type spring collets with a dedicated bore size. Large apacity: up to 80mm round ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Hardened and ground main body and cone Speeds up to 6000 rpm lso available in IN 6353 straight recess mountings G E J F H L rawtube dapter Multibore ollet type Spring ollet huck Type (IN) huck Model No. J495 J496 J475 J498 J834 Mount IN Multibore ollet M673 M673 M677 M677 J660 apacity, Round apacity Hex apacity Square Spring ollet 4728 (173E) 4728 (173E) 4291 (185E) 4291 (185E) H047 (193E) apacity Round apacity Hex apacity Square E F M58 x 1.5 M58 x 1.5 M76 x 1.5 M76 x 1.5 M100 x 2.0 G H J L Maximum RPM rawbar Force (kn) lamping Force (kg) prox. huck Weight 8.6kg 9kg 13kg 13kg 34kg IN 6353 Mounts J499 J x x 6 M673 M (173E) 4291 (185E) M58 x 1.5 M76 x kg 13kg Page 8

9 Standard Quick hange ollet hucks ead length operation for rawford Multibore ollets and Spring ollets with type or IN 6353 mounts Standard body design, ideal for both bar and secondary operations Quick change bayonet cap design saves setup time Models available for both rawford and IN type Multibore collets When gripping short components, or where marking of a finished diameter is to be avoided, use spring collets with a dedicated bore size Large capacity: up to 80mm round ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Hardened and ground main body and cone Speeds up to 6000 rpm type spindle and recess mountings Multibore ollet Spring ollet For Standard Multibore ollets huck Type Q-42 Q-42 Q-54 Q-54 Q-66 Q-80 huck Model No Mount Multibore ollet W-850 W-850 V-120 V-120 T-285 N-175 apacity Round apacity Hex apacity Square Spring ollet M286 M286 N853 N853 K244 L196 apacity Round apacity Hex apacity Square E Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 8.6kg 9kg 13kg 14kg 22kg 34kg huck Seal Part No huck ap Part No.2 68G 68G 983G 983G 556G 492G IN 6353 Mounts Q-28 Q-42 Q-54 Q x x x x 6 T980 W850 V120 T P288 M286 N853 K kg 8.6kg 14kg 22kg Telephone: Page 9

10 Standard Quick hange ollet hucks ead length operation for IN standard Multibore, IN type spring collets with type and recess mounts Quick change bayonet cap design saves setup time Uses IN type Multibore ollets for a powerful parallel grip over a wide diameter range. When gripping short components or where marking of a finished diameter is to be avoided, use the IN type spring collets with a dedicated bore size collet Large capacity: up to 60mm round ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Hardened and ground main body and cone Speeds up to 6000 rpm lso available in IN 6353 mountings Multibore ollet type Spring ollet huck type Q-42 Q-42 Q-60 Q-60 huck Model No Mount Mulitibore ollet M-673 M-673 M-677 M-677 apacity Round apacity Hex apacity Square Spring ollet 4728 (173E) 4728 (173E) 4291 (185E) 4291 (185E) apacity Round apacity Hex apacity Square E Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 8.6kg 9kg 13kg 14kg huck Seal Part No huck ap Part No.3 428G 428G 142G 142G IN 6353 Mounts Q-42 Q x x 6 M673 M (173E) 4291 (185E) kg 14kg G 142G Page 10

11 Extended Length ollet hucks ead length operation using rawford Multibore and Spring ollets with type mounts For use on N machines where the drawtube protudes from the spindle nose Uses rawford Multibore collets for a powerful parallel grip over a wide diameter range When gripping short components, or where marking of a finished diameter is to be avoided, use a spring collet with a dedicated bore size Large apacity: up to 66mm diameter ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Hardened and ground main body and cone G E J F H L rawtube dapter Multibore ollet Spring ollet huck Type huck Model No. H703 H792 J983 Mount Std Multibore ollet W850 V120 T285 apacity, Round apacity Hex apacity Square Spring ollet M286 N853 K244 apacity Round apacity Hex apacity Square E F M58 x 1.5 M76 x 1.5 M90 x 2.0 G H J L Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 10kg 15kg 24kg Telephone: Page 11

12 Extended Length ollet hucks ead length operation using IN standard Multibore and IN Spring ollets with type mount For use on N machines where the drawtube protudes from the spindle nose. Uses rawford Multibore collets for a powerful parallel grip over a wide diameter range. When gripping short components, or where marking of a finished diameter is to be avoided, use a spring collet with a dedicated bore size. apacity: up to 42mm diameter. ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper. Hardened and ground main body and cone. G E J F H L rawtube dapter Multibore ollet type Spring ollet huck Type Q-42 huck Model No. G497 Mount 2-5 Std Multibore ollet M673 apacity, Round 42 apacity Hex 36 apacity Square 29 Spring ollet 4728 (173E) apacity Round 42 apacity Hex 38 apacity Square E F M58 x 1.5 G H 15 J 65 L 80 Maximum RPM 6000 rawbar Force (kn) 24 lamping Force (kg) 5987 pprox. huck Weight 10.6kg Page 12

13 Short Length rawback ctuated M ollet hucks Positive location against automated ram feed Ideal for bar work with minimum working envelope ccepts rawford Multibore ollets and IN Multibore type spindle mounting Max Min 3-off stud positions Equi-Spaced J Pitch ircle Ø Mount H Thread E Max (Unclamped) F Min (lamped) 25 Ø Max apacity Ø G K olts 6 Equi-Spaced Multibore ollet Spring ollet huck Type M-54 M-60 M-66 huck Model No Mount Mulitibore ollet (Standard/IN) V120 M677 T285 apacity Round apacity Hex apacity Square M96 x 2 M96 x 2 M96 x 2 E F G Maximum RPM rawbar Force (kn) lamping Force (kg) prox. huck Weight 13kg 14kg 19kg Telephone: Page 13

14 Hydraulic Table huck Suitable for N Rotary Table applications Operated by air/oil intensifier or suitable hydraulic supply Full 360 scope of supply ccepts both rawford Multibore and Spring ollets Recess mounting P E Multibore ollet Spring ollet huck Type HT-42 HT-54 huck Model No. G101 G482 Mount 75 x 6 90 x 6 Multibore ollet W850 V120 apacity Round apacity Hex apacity Square Spring ollet M286 N853 apacity Round apacity Hex apacity Square E P M8 M10 Max input pressure (bar) Working pressure (bar) Max displacement (cm3) Page 14

15 ir Powered Front Mount 5 ead Length ollet hucks No raw-tube or ir Feed Tubes required. For Lathes, Rotary Tables and Grinders: Series TL206-5 ollet huck Order No. with Mount TL206-5 Straight Recess Mount Type Mount TL TL TL TL Straight Recess Mount Type Mount TL TL TL TL TL Other Mounts TL /4-8 TL Taper TL /16-10 TL /8-6 ollet huck Supplied with: 2 Filter ars 2 ir Hoses 1 Fixing racket for Hoses 1 5 ollet Wrench 1 Hex Key Mounting olts Users Manual No hydraulic system required No draw-tube or air feed tubes restricting spindle bore No rear cylinders and cylinder adapters Low cost Easily convert any lathe of grinder into a production machine Ideal for rotary table applications hange from collet chuck to standard chuck quick and easy High speed 5000 RPM High accuracy less than 0.005mm TIR Repeats on duplicate parts +/ mm ead length design For best accuracy use high quality rawford ollets Lever or foot pedal actuated Low maintenance with oil mist lubrication system High resistance to coolant and chip penetration Uses 5 ollets, range 1mm to 27mm vailable in,, L, 4 degree, threaded and straight recess mounting ollet huck ollet huck TL mm (6.61 ) 130mm (5.12 ) 26mm (1.02 ) 5mm (0.20 ) E 100mm (3.94 ) F 55mm (2.17 ) G 106mm (4.17 ) H 147mm (5.79 ) 5 ollet Specifications TL206-5 Screw Hole ia 9mm (0.35 ) x 4 ollet Type 5 ollets Max. RPM 5000 Sleeve Stroke 4mm (0.16 ) ir Pressure 3-8 kg/cm2 ( psi) Through Hole ia 26mm (1.06 ) huck Weight 10.6kg (22Ibs) Grip Force 10, psi NOTE: E shown is for model TL206-5 ollet huck with no mounting plate. dd 3/4 to the E dimension for mounting plate. This will vary slightly depending on the mounting required. If an exact E dimension is required, consult factory. OPTIONS: Order No: LEV100 Lever ontrol Package: Includes lever control, line filter, lubricator, and regulator. Order No: FOT200 Foot Pedal ontrol Package: Includes foot pedal, line filter, lubricator and regulator. Telephone: Page 15

16 ir Powered Front Mount 16 ead Length ollet hucks No raw-tube or ir Feed Tubes required. For Lathes, Rotary Tables and Grinders: Series TL ollet huck Order No. with Mount TL207-16P Straight Recess Mount Type Mount TL TL TL Straight Recess Mount Type Mount TL TL TL TL Other Mounts TL Taper TL /16-10 TL /8-6 ollet huck Supplied with: 2 Filter ars 2 ir Hoses 1 Fixing racket for Hoses 1 5 ollet Wrench 1 Hex Key Mounting olts Users Manual No hydraulic system required No draw-tube or air feed tubes restricting spindle bore No rear cylinders and cylinder adapters Low cost Easily convert any lathe of grinder into a production machine Ideal for rotary table applications hange from collet chuck to standard chuck quick and easy High speed 4000 RPM High accuracy less than 0.005mm TIR Repeats on duplicate parts +/ mm ead length design For best accuracy use high quality rawford ollets Lever or foot pedal actuated Low maintenance with oil mist lubrication system High resistance to coolant and chip penetration Uses 16 ollets, range 1.5mm to 42.5mm vailable in,, L, 4 degree, threaded and straight recess mounting ollet huck ollet huck TL mm (7.40 ) 150mm (5.91 ) 40mm (1.57 ) 5mm (0.20 ) E 112mm (4.41 ) F 63mm (2.48 ) G 130mm (5.12 ) H 168mm (6.61 ) 16 ollet Specifications TL Screw Hole ia 9mm (0.35 ) x 4 ollet Type 16 ollets Max. RPM 4000 Sleeve Stroke 4mm (0.16 ) ir Pressure 3-8 kg/cm2 ( psi) Through Hole ia 40mm (1.57 ) huck Weight 14kg (30.8Ibs) Grip Force 12, psi NOTE: E shown is for model TL ollet huck with no mounting plate. dd 3/4 to the E dimension for mounting plate. This will vary slightly depending on the mounting required. If an exact E dimension is required, consult factory. OPTIONS: Order No: LEV100 Lever ontrol Package: Includes lever control, line filter, lubricator, and regulator. Order No: FOT200 Foot Pedal ontrol Package: Includes foot pedal, line filter, lubricator and regulator. Page 16

17 ir Powered Front Mount 173E ead Length ollet hucks No raw-tube or ir Feed Tubes required. For Lathes, Rotary Tables and Grinders: Series TL ollet huck Order No. with Mount TL Straight Recess Mount Type Mount TL TL TL Straight Recess Mount Type Mount TL TL TL TL Other Mounts TL Taper TL /16-10 TL /8-6 ollet huck Supplied with: 2 Filter ars 2 ir Hoses 1 Fixing racket for Hoses 1 Hex Key Mounting olts Users Manual No hydraulic system required No draw-tube or air feed tubes restricting spindle bore No rear cylinders and cylinder adapters Low cost Easily convert any lathe of grinder into a production machine Ideal for rotary table applications hange from collet chuck to standard chuck quick and easy High speed 5000 RPM High accuracy less than 0.005mm TIR Repeats on duplicate parts +/ mm ead length design For best accuracy use high quality rawford ollets Lever or foot pedal actuated Low maintenance with oil mist lubrication system High resistance to coolant and chip penetration Uses 173E (Type: ) ollets, range 2mm to 42mm vailable in,, L, 4 degree, threaded and straight recess mounting ollet huck ollet huck TL mm (7.72 ) 155mm (6.10 ) 42mm (1.65 ) 5mm (0.20 ) E 136mm (5.35 ) F 75mm (2.95 ) G 150mm (5.92 ) H 172mm (6.77 ) 173E ollet Specifications TL Screw Hole ia 11mm (0.43 ) x 3 - M10xP1.5x3 ollet Type 42 ollets Max. RPM 4000 Sleeve Stroke 4mm (0.16 ) ir Pressure 3-8 kg/cm2 ( psi) Through Hole ia 42mm (1.65 ) huck Weight 16kg (35.2Ibs) Grip Force 13, psi NOTE: E shown is for model TL ollet huck with no mounting plate. dd 3/4 to the E dimension for mounting plate. This will vary slightly depending on the mounting required. If an exact E dimension is required, consult factory. OPTIONS: Order No: LEV100 Lever ontrol Package: Includes lever control, line filter, lubricator, and regulator. Order No: FOT200 Foot Pedal ontrol Package: Includes foot pedal, line filter, lubricator and regulator. Telephone: Page 17

18 ir Powered 5 Stationary ead Length ollet hucks Use for Pallets, Tombstones, Machining entres, Standard Mills and rill Presses: Series TL225-5 ollet huck Order No. TL225-5 Powered by air Small foot print Low cost Easy to install High accuracy less than 0.005mm TIR Repeats on duplicate parts +/ mm ead length design For best accuracy use high quality rawford ollets Lever or foot pedal actuated Low maintenance with oil mist lubrication system High resistance to coolant and chip penetration Low maintenance, long life ollet huck 5 ollet ollet huck TL mm (5.67 ) 55mm (2.17 ) 26mm (1.02 ) 100mm (3.94 ) E 95mm (3.74 ) F 75mm (2.95 ) G 118mm (4.65 ) H 8.5mm (0.33 ) Specifications TL225-5 ollet Type 5 ollets Max. RPM 4000 ir Pressure 3-8 kg/cm2 ( psi) Through Hole ia 26mm (1.02 ) huck Weight 9.4kg (20.7Ibs) Grip Force 13, psi Page 18

19 5 & 16 ead Length Power hucks Setrite four-screw adjustment feature allows accuracy adjustment to virtually zero, eliminating any error in the collet Main spindle and sub-spindle N chuck applications ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Repeatability is.005mm TIR Hardened and ground main body and cone Speeds up to 6000 rpm.276 L E PITH IRLE H6 G LSS 6H H.472" min I 5 ollet M SPINLE LSS N G LSS 6H J H 16 ollet K F MOUNTING HOLES (6) Straight Recessed P With 5 or 6 Mount imensions shown in inch/mm For 5 Type ollets For 16 Type ollets St Recess Model No w/mount Model No Mount x 6 apacity Hex apacity Square E F M8 M8 M10 M10 M10 G Thread M68 x 1.5 M68 x 1.5 M88 x 1.5 M88 x 1.5 M88 x 1.5 H J K L M N P Maximum RPM rawbar Force (kn) lamping Force (kg) huck Weight 6.8 kg 8.1kg 10.7 kg 11.8 kg 11.1kg Telephone: Page 19

20 5 & 16 ollet hucks Pull ack esign for Type mounts Used on N turning machines with drawtube actuation Main spindle and sub-spindle N chuck applications Suitable for bar work and second operation machining ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Repeatability is.005 TIR Hardened and ground main body and cone Speeds up to 6000 rpm L J E rawtube dapter ollet huck 5 ollet 16 ollet huck Type For 5 Type ollets huck Model No. F057 G627 F052 G626 F053 F054 Mount apacity Round apacity Hex apacity Square E J L Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 4.4 kg 6.4 kg 5.4 kg 8.2 kg 9.5 kg 13.2 kg For 16 Type ollets 50 F077 F078 F kg 6.8 kg 9.1 kg 15 kg Page 20

21 5 & 16 ead Length Power hucks IN 6353 Straight Recess Mounts Short overall length ideal for main or sub-spindle applications In second operation work, shouldered components can be stopped against the face of the collet ccuracy guaranteed to.005mm TIR from rear mounting register and working collet taper Repeatability is.005mm TIR Hardened and ground main body and cone Speeds up to 6000 rpm H H 5 ollet G LSS 6H J H6 E PITH IRLE G LSS 6H.236" J 16 ollet K 2 Mount K F MOUNTING HOLES (6) IN 6353 Mounts huck Type For 5 Type ollets huck Model No Mount x 6 apacity Round apacity Hex apacity Square E F - - M10 G thread M68 x 1.5 M68 x 1.5 M68 x 1.5 J K Maximum RPM rawbar Force (kn) lamping Force (kg) pprox. huck Weight 4.8 kg 5.9 kg 5.6 kg For 16 Type ollets x M12 M88 x 1.5 M88 x 1.5 M88 x 1.5 M88 x kg 9.3 kg 11.8 kg 10.7 kg Telephone: Page 21

22 R8 ollets Type Z384 Imperial and Metric Round only Size Part Number (Imperial) 1/16" Z384 R 1/16 3/32" Z384 R 3/32 1/8" Z384 R 1/8 5/32" Z384 R 5/32 3/16" Z384 R 3/16 7/32" Z384 R 7/32 1/4" Z384 R 1/4 9/32" Z384 R 9/32 5/16" Z384 R 5/16 11/32" Z384 R 11/32 3/8" Z384 R 3/8 13/32" Z384 R 13/32 7/16" Z384 R 7/16 15/32" Z384 R 15/32 1/2" Z384 R 1/2 17/32" Z384 R 17/32 9/16" Z384 R 9/16 19/32" Z384 R 19/32 5/8" Z384 R 5/8 21/32" Z384 R 21/32 11/16" Z384 R 11/16 23/32" Z384 R 23/32 3/4" Z384 R 3/4 25/32" Z384 R 25/32 13/16" Z384 R 13/16 27/32" Z384 R 27/32 ollet imensions (Metric) ' Size Part Number (Metric) 2mm Z384 R 2MM 3mm Z384 R 3MM 4mm Z384 R 4MM 5mm Z384 R 5MM 6mm Z384 R 6MM 7mm Z384 R 7MM 8mm Z384 R 8MM 9mm Z384 R 9MM 10mm Z384 R 10MM 11mm Z384 R 11MM 12mm Z384 R 12MM 13mm Z384 R 13MM 14mm Z384 R 14MM 15mm Z384 R 15MM 16mm Z384 R 16MM 17mm Z384 R 17MM 18mm Z384 R 18MM 19mm Z384 R 19MM 20mm Z384 R 20MM R8 Round ollet Sets (Imperial) Set No. of ollets Part No. 1/8" 3/4" x 32nds 21 Z384 SET 5 1/8" 3/4" x 16ths 11 Z384 SET 6 1/8" 3/4" x 8ths 6 Z384 SET 7 R8 Round ollet Sets (Metric) Set No. of ollets Part No. 2mm-20mm x 1mm 19 Z384 SET 1 Page 22

23 ollet imensions (Metric)

24 5 ollets Type 0123 Metric Round, Hexagon and Square ollet imensions (Metric) Size Round Hex Square 1.0mm 0123 R 1MM mm 0123 R 1.5MM mm 0123 R 2MM mm 0123 R 2.5MM mm 0123 R 3MM mm 0123 R 3.5MM mm 0123 R 4MM mm 0123 R 4.5MM mm 0123 R 5MM 0123 X 5MM 0123 S 5MM 5.5mm 0123 R 5.5MM 0123 X 5.5MM - 6.0mm 0123 R 6MM S 6MM 6.5mm 0123 R 6.5MM mm 0123 R 7MM 0123 X 7MM 0123 S 7MM 7.5mm 0123 R 7.5MM mm 0123 R 8MM 0123 X 8MM 0123 S 8MM 8.5mm 0123 R 8.5MM mm 0123 R 9MM mm 0123 R 9.5MM mm 0123 R 10MM 0123 X 10MM 0123 S 10MM 10.5mm 0123 R 10.5MM mm 0123 R 11MM mm 0123 R 11.5MM mm 0123 R 12MM 0123 X 12MM 0123 S 12MM 12.5mm 0123 R 12.5MM mm 0123 R 13MM mm 0123 R 13.5MM mm 0123 R 14MM 0123 X 14MM 0123 S 14MM 14.5mm 0123 R 14.5MM mm 0123 R 15MM mm 0123 R 15.5MM mm 0123 R 16MM 0123 X 16MM 0123 S 16MM 16.5mm 0123 R 16.5MM mm 0123 R 17MM mm 0123 R 17.5MM mm 0123 R 18MM 0123 X 18MM 0123 S 18MM 18.5mm 0123 R 18.5MM mm 0123 R 19MM mm 0123 R 19.5MM mm 0123 R 20MM 0123 X 20MM mm 0123 R 20.5MM mm 0123 R 21MM mm 0123 R 21.5MM mm 0123 R 22MM 0123 X 22MM - Size Round Hex Square 22.5mm 0123 R 22.5MM mm 0123 R 23MM mm 0123 R 23.5MM mm 0123 R 24MM mm 0123 R 24.5MM mm 0123 R 25MM mm 0123 R 25.5MM mm 0123 R 26MM mm 0123 R 26.5MM mm 0123 R 27MM Round ollet Sets (Metric) Set No. of ollets Part No. 3mm - 27mm x 0.5mm SET 1 3mm - 27mm x 1mm SET 2 5 Emergency ollet with 1/8 pilot bore (soft face and bore): Type K124R R 1/8 Page 24

25 16 ollets Type G119 Imperial Round, Hexagon and Square 16 ollet imensions (Metric) Size Round Hex Square 1/16 G119 R 1/ /32 G119 R 3/ /8" G119 R 1/ /32 G119 R 5/ /16" G119 R 3/ /32 G119 R 7/ /4" G119 R 1/4 G119 X.250 G119 S 1/4 9/32 G119 R 9/ /16" G119 R 5/16 G119 X.312 G119 S 5/16 11/32 G119 R 11/ /8" G119 R 3/8 G119 X.375 G119 S 3/8 13/32 G119 R 13/ /16" G119 R 7/16 G119 X.437 G119 S 7/16 15/32 G119 R 15/ /2" G119 R 1/2 G119 X.500 G119 S 1/2 17/32 G119 R 17/ /16" G119 R 9/16 G119 X.562 G119 S 9/16 19/32 G119 R 19/ /8" G119 R 5/8 G119 X.625 G119 S 5/8 21/32 G119 R 21/ /16" G119 R 11/16 G119 X /32 G119 R 23/ /4" G119 R 3/4 G119 X.750 G119 S 3/4 25/32 G119 R 25/ /16" G119 R 13/16 G119 X /32 G119 R 27/ /8" G119 R 7/8 G119 X.875 G119 S 7/8 29/32 G119 R 29/ /16" G119 R 15/16 G119 X /32 G119 R 31/ " G119 R 1 G119 X G119 S 1 Size Round Hex Square 1.1/32 G119 R 1.1/ /16" G119 R 1.1/16 G119 X /32 G119 R 1.3/ /8" G119 R 1.1/8 G119 X G119 S 1.1/8 1.5/32 G119 R 1.5/ /16" G119 R 1.3/ /32 G119 R 1.7/ /4" G119 R 1.1/4 G119 X /32 G119 R 1.9/ /16" G119 R 1.5/16 G119 X /32 G119 R 1.11/ /8" G119 R 1.3/ /32 G119 R 1.13/ /16 G119 R 1.7/ /32 G119 R 1.15/ /2" G119 R 1.1/ /32 G119 R 1.17/ /16" G119 R 1.9/ /32 G119 R 1.19/ /8" G119 R 1.5/ Emergency ollet with 1/8 pilot bore (soft face and bore): Type: G444 Telephone: Page 25

26 16 ollets Type G119 Metric Round, Hexagon and Square 16 ollet imensions (Metric) Size Round Hex Square 1.5mm G119 R 1.5MM mm G119 R 2MM mm G119 R 2.5MM mm G119 R 3MM mm G119 R 3.5MM mm G119 R 4MM mm G119 R 4.5MM mm G119 R 5MM G119 X 5MM G119 S 5MM 5.5mm G119 R 5.5MM G119 X 5.5MM - 6.0mm G119 R 6MM - G119 S 6MM 6.5mm G119 R 6.5MM mm G119 R 7MM G119 X 7MM G119 S 7MM 7.5mm G119 R 7.5MM mm G119 R 8MM G119 X 8MM G119 S 8MM 8.5mm G119 R 8.5MM mm G119 R 9MM mm G119 R 9.5MM mm G119 R 10MM G119 X 10MM G119 S 10MM 10.5mm G119 R 10.5MM mm G119 R 11MM G119 X 11MM mm G119 R 11.5MM mm G119 R 12MM G119 X 12MM G119 S 12MM 12.5mm G119 R 12.5MM mm G119 R 13MM G119 X 13MM mm G119 R 13.5MM mm G119 R 14MM G119 X 14MM G119 S 14MM 14.5mm G119 R 14.5MM mm G119 R 15MM G119 X 15MM G119 S 15MM 15.5mm G119 R 15.5MM mm G119 R 16MM G119 X 16MM G119 S 16MM 16.5mm G119 R 16.5MM mm G119 R 17MM G119 X 17MM mm G119 R 17.5MM mm G119 R 18MM G119 X 18MM G119 S 18MM 18.5mm G119 R 18.5MM mm G119 R 19MM G119 X 19MM mm G119 R 19.5MM mm G119 R 20MM G119 X 20MM G119 S 20MM 20.5mm G119 R 20.5MM mm G119 R 21MM mm G119 R 21.5MM mm G119 R 22MM G119 X 22MM G119 S 22MM 22.5mm G119 R 22.5MM - - Size Round Hex Square 23.0mm G119 R 23MM mm G119 R 23.5MM mm G119 R 24MM G119 X 24MM mm G119 R 24.5MM mm G119 R 25MM G119 X 25MM G119 S 25MM 25.5mm G119 R 25.5MM mm G119 R 26MM G119 X 26MM mm G119 R 26.5MM mm G119 R 27MM G119 X 27MM mm G119 R 27.5MM mm G119 R 28MM mm G119 R 28.5MM mm G119 R 29MM mm G119 R 29.5MM mm G119 R 30MM G119 X 30MM mm G119 R 30.5MM mm G119 R 31MM mm G119 R 31.5MM mm G119 R 32MM G119 X 32MM mm G119 R 32.5MM mm G119 R 33MM mm G119 R 33.5MM mm G119 R 34MM mm G119 R 34.5MM mm G119 R 35MM G119 X 35MM mm G119 R 35.5MM mm G119 R 36MM mm G119 R 36.5MM mm G119 R 37MM mm G119 R 37.5MM mm G119 R 38MM mm G119 R 38.5MM mm G119 R 39MM mm G119 R 39.5MM mm G119 R 40MM mm G119 R 40.5MM mm G119 R 41MM mm G119 R 41.5MM mm G119 R 42MM mm G119 R 42.5MM Emergency ollet with 1/8 pilot bore (soft face and bore): Type: G444 Page 26

27 rawford Multibore ollets Plain ore imensions (Metric) Part No. T W V T N Grip Range T980 W850 Inch MM Round Hexagon Square Round Hexagon Square 1/16-3/ T980 R 1 T980 X 68 T980 S 86 W850 R 1 W850 X 68 W850 S 86 1/8-1/ T980 R 2 T980 X 69 T980 S 87 W850 R 2 W850 X 69 W850 S 87 1/4-3/ T980 R 3 T980 X 70 T980 S 88 W850 R 3 W850 X 70 W850 S 88 3/8-1/ T980 R 4 T980 X 71 T980 S 89 W850 R 4 W850 X 71 W850 S 89 1/2-5/ T980 R 5 T980 X 72 T980 S 90 W850 R 5 W850 X 72 W850 S 90 5/8-3/ T980 R 6 T980 X 73 T980 S 91 W850 R 6 W850 X 73 W850 S 91 3/4-7/ T980 R 7 T980 X 74 - W850 R 7 W850 X 74 W850 S 92 7/ T980 R 8 T980 X 75 - W850 R 8 W850 X 75 W850 S / T980 R W850 R 9 W850 X 76 W850 S /8-1.1/ W850 R 10 W850 X 77 W850 S /4-1.3/ W850 R 11 W850 X /8-1.1/ W850 R 12 W850 X /2-1.5/ W850 R /2-1.5/ W850 R Grip Range V-120 T-285 N-175 Inch MM Round Hex Square Round Hex Square Round & Hex Square Smooth ore 1/16-3/ V120 R /8-1/ V120 R 2 V120 X 69 V120 S 87 T285 R E2 T285 X E69 T285 S E /4-3/ V120 R 3 V120 X 70 V120 S 88 T285 R E3 T285 X E70 T285 S E /8-1/ V120 R 4 V120 X 71 V120 S 89 T285 R E4 T285 X E71 T285 S E /2-5/ V120 R 5 V120 X 72 V120 S 90 T285 R E5 T285 X E72 T285 S E90 N175 R F5 N175 X F72 N175 S F100 5/8-3/ V120 R 6 V120 X 73 V120 S 91 T285 R E6 T285 X E73 T285 S E91 N175 R F6 N175 X F73 N175 S F101 3/4-7/ V120 R 7 V120 X 74 V120 S 92 T285 R E7 T285 X E74 T285 S E92 N175 R F7 N175 X F74 N175 S F102 7/ V120 R 8 V120 X 75 V120 S 93 T285 R E8 T285 X E75 T285 S E93 N175 R F8 N175 X F75 N175 S F / V120 R 9 V120 X 76 V120 S 94 T285 R E9 T285 X E76 T285 S E94 N175 R F9 N175 X F76 N175 S F /8-1.1/ V120 R 10 V120 X 77 V120 S 95 T285 R E10 T285 X E77 T285 S E95 N175 R F10 N175 X F77 N175 S F /4-1.3/ V120 R 11 V120 X 78 V120 S 96 T285 R E11 T285 X E78 T285 S E96 N175 R F11 N175 X F78 N175 S F /8-1.1/ V120 R 12 V120 X 79 V120 S 97 T285 R E12 T285 X E79 T285 S E97 N175 R F12 N175 X F79 N175 S F /2-1.5/ V120 R 13 V120 X 80 V120 S 98 T285 R E13 T285 X E80 T285 S E98 N175 R F13 N175 X F80 N175 S F /8-1.3/ V120 R 14 V120 X 81 - T285 R E14 T285 X E81 T285 S E99 N175 R F14 N175 X F81 N175 S F /4-1.7/ V120 R 15 V120 X 82 - T285 R E15 T285 X E82 - N175 R F15 N175 X F82 N175 S F / V120 R 16 V120 X 83 - T285 R E16 T285 X E83 - N175 R F16 N175 X F83 N175 S F / V120 R T285 R E17 T285 X E84 - N175 R F17 N175 X F84 N175 S F /8-2.1/ T285 R E18 T285 X E85 - N175 R F18 N175 X F85-2.1/4-2.3/ T285 R E N175 R F19 N175 X F86-2.3/8-2.1/ T285 R E N175 R F20 N175 X F87-2.1/2-2.5/ T285 R E N175 R F21 N175 X F88-2.5/8-2.3/ N175 R F /4-2.7/ N175 R F23-2.7/ N175 R F / N175 R F Telephone: Page 27

28 rawford Multibore ollets Heavy uty imensions (Metric) Part No. W V T N Grip Range W-850 Heavy uty V-120 Heavy uty Metric mm Round/Hexagon Round/Hexagon 6-9 W850H 5-9MM V120H 5-9MM 9-12 W850H 9-12MM V120H 9-12MM W850H 12-15MM V120H 12-15MM W850H 15-18MM V120H 15-18MM W850H 18-21MM V120H 18-21MM W850H 21-24MM V120H 21-24MM W850H 24-27MM V120H 24-27MM W850H 27-30MM V120H 27-30MM W850H 30-33MM V120H 30-33MM W850H 33-36MM V120H 33-36MM W MM* V120H 36-39MM W MM* V120H 39-42MM V120H 42-45MM V120H 45-48MM V120H 48-51MM V MM* Grip Range T-285 Heavy uty N-175 Heavy uty Metric mm Round/Hexagon Round/Hexagon T285H 12-15MM N175H 12-15MM T285H 15-18MM N175H 15-18MM T285H 18-21MM N175H 18-21MM T285H 21-24MM N175H 21-24MM T285H 24-27MM N175H 24-27MM T285H 27-30MM N175H 27-30MM T285H 30-33MM N175H 30-33MM T285H 33-36MM N175H 33-36MM T285H 36-39MM N175H 36-39MM T285H 39-42MM N175H 39-42MM T285H 42-45MM N175H 42-45MM T285H 45-48MM N175H 45-48MM T285H 48-51MM N175H 48-51MM T285H 51-54MM N175H 51-54MM T285H 54-57MM N175H 54-57MM T285H 57-60MM N175H 57-60MM T MM* N175H 60-63MM N175H 63-66MM N175H 66-69MM N MM* N MM* N MM* *enotes round only Page 28

29 Multibore ollets IN 6343 Spiral Serrated bore imensions (Metric) Part No. M M J M673 M677 J E ompatible 185E ompatible 193E ompatible Grip Range (Spring ollet 4728) (Spring ollet 4291) (Spring ollet H-47) (mm) Round Hex Square Round Hex Square Round Hex 4-6 M673 R 6MM* M673 X 6MM* M673 S 6MM* M673 R 8MM* M673 X 8MM* M673 S 8MM* M677 R 8MM* M677 X 8MM* M677 S 8MM* M673 R 10MM M673 X 10MM M673 S 10MM M677 R 10MM M677 X 10MM M677 S 10MM M673 R 12MM M673 X 12MM M673 S 12MM M677 R 12MM M677 X 12MM M677 S 12MM M673 R 14MM M673 X 14MM M673 S 14MM M677 R 14MM M677 X 14MM M677 S 14MM J660 R 14MM J660 X 14MM M673 R 16MM M673 X 16MM M673 S 16MM M677 R 16MM M677 X 16MM M677 S 16MM J660 R 16MM J660 X 16MM M673 R 18MM M673 X 18MM M673 S 18MM M677 R 18MM M677 X 18MM M677 S 18MM J660 R 18MM J660 X 18MM M673 R 20MM M673 X 20MM M673 S 20MM M677 R 20MM M677 X 20MM M677 S 20MM J660 R 20MM J660 X 20MM M673 R 22MM M673 X 22MM M673 S 22MM M677 R 22MM M677 X 22MM M677 S 22MM J660 R 22MM J660 X 22MM M673 R 24MM M673 X 24MM M673 S 24MM M677 R 24MM M677 X 24MM M677 S 24MM J660 R 24MM J660 X 24MM M673 R 26MM M673 X 26MM M673 S 26MM M677 R 26MM M677 X 26MM M677 S 26MM J660 R 26MM J660 X 26MM M673 R 28MM M673 X 28MM M673 S 28MM M677 R 28MM M677 X 28MM M677 S 28MM J660 R 28MM J660 X 28MM M673 R 30MM M673 X 30MM M673 S 30MM M677 R 30MM M677 X 30MM M677 S 30MM J660 R 30MM J660 X 30MM M673 R 32MM M673 X 32MM - M677 R 32MM M677 X 32MM M677 S 32MM J660 R 32MM J660 X 32MM M673 R 34MM M673 X 34MM - M677 R 34MM M677 X 34MM M677 S 34MM J660 R 34MM J660 X 34MM M673 R 36MM M673 X 36MM - M677 R 36MM M677 X 36MM M677 S 36MM J660 R 36MM J660 X 36MM M673 R 38MM - - M677 R 38MM M677 X 38MM M677 S 38MM J660 R 38MM J660 X 38MM M673 R 40MM - - M677 R 40MM M677 X 40MM M677 S 40MM J660 R 40MM J660 X 40MM M673 R 42MM - - M677 R 42MM M677 X 42MM M677 S 42MM J660 R 42MM J660 X 42MM M677 R 44MM M677 X 44MM - J660 R 44MM J660 X 44MM M677 R 46MM M677 X 46MM - J660 R 46MM J660 X 46MM M677 R 48MM M677 X 48MM - J660 R 48MM J660 X 48MM M677 R 50MM M677 X 50MM - J660 R 50MM J660 X 50MM M677 R 52MM M677 X 52MM - J660 R 52MM J660 X 52MM M677 R 54MM - - J660 R 54MM J660 X 54MM M677 R 56MM - - J660 R 56MM J660 X 56MM M677 R 58MM - - J660 R 58MM J660 X 58MM M677 R 60MM* - - J660 R 60MM J660 X 60MM J660 R 62MM J660 X 62MM J660 R 64MM J660 X 64MM J660 R 66MM J660 X 66MM J660 R 68MM J660 X 68MM J660 R 70MM J660 R 72MM J660 R 74MM J660 R 76MM J660 R 78MM J660 R 80MM* - Round bore collets are supplied with spiral serations except where marked with (*) Hexagonal and square collets are supplied with annular serations except where marked with (*) ll collets marked with (*) are supplied with plain bore Telephone: Page 29

30 173E Spring ollets Type: 4728 (lso known as 42) Imperial Round, Hexagon and Square imensions (Metric) Size Round Hex Square 1/16" 4728 R 1/ /8" 4728 R 1/ /16" 4728 R 3/ X S 3/16 1/4" 4728 R 1/ X S 1/4 5/16" 4728 R 5/ X S 5/16 3/8" 4728 R 3/ X S 3/8 7/16" 4728 R 7/ X S 7/16 1/2" 4728 R 1/ X S 1/2 9/16" 4728 R 9/ X S 9/16 5/8" 4728 R 5/ X S 5/8 11/16" 4728 R 11/ X.687-3/4" 4728 R 3/ X S 3/4 13/16" 4728 R 13/ X.812-7/8" 4728 R 7/ X S 7/8 15/16" 4728 R 15/ X.937-1" 4728 R X S 1 1.1/16" 4728 R 1.1/ X /8" 4728 R 1.1/ X S 1.1/8 1.3/16" 4728 R 1.3/ /4" 4728 R 1.1/ X / R 1.5/ X /8" 4728 R 1.3/ /16" 4728 R 1.7/ /2" 4728 R 1.1/ /16" 4728 R 1.9/ /8" 4728 R 1.5/8 - - Emergency ollet with soft face and pilot hole 1/8 dia. Type: J550 Page 30

31 173E Spring ollets Type: 4728 (lso known as 42) Metric Round, Hexagon and Square imensions (Metric) Size Round Hex Square 2.0mm 4728 R 2MM mm 4728 R 2.5MM mm 4728 R 3MM mm 4728 R 3.5MM mm 4728 R 4MM mm 4728 R 4.5MM mm 4728 R 5MM 4728 X 5MM 4728 S 5MM 5.5mm 4728 R 5.5MM 4728 X 5.5MM - 6.0mm 4728 R 6MM S 6MM 6.5mm 4728 R 6.5MM mm 4728 R 7MM 4728 X 7MM 4728 S 7MM 7.5mm 4728 R 7.5MM mm 4728 R 8MM 4728 X 8MM 4728 S 8MM 8.5mm 4728 R 8.5MM mm 4728 R 9MM mm 4728 R 9.5MM mm 4728 R 10MM 4728 X 10MM 4728 S 10MM 10.5mm 4728 R 10.5MM mm 4728 R 11MM 4728 X 11MM mm 4728 R 11.5MM mm 4728 R 12MM 4728 X 12MM 4728 S 12MM 12.5mm 4728 R 12.5MM mm 4728 R 13MM 4728 X 13MM mm 4728 R 13.5MM mm 4728 R 14MM 4728 X 14MM 4728 S 14MM 14.5mm 4728 R 14.5MM mm 4728 R 15MM 4728 X 15MM 4728 S 15MM 15.5mm 4728 R 15.5MM mm 4728 R 16MM 4728 X 16MM 4728 S 16MM 16.5mm 4728 R 16.5MM mm 4728 R 17MM 4728 X 17MM mm 4728 R 17.5MM mm 4728 R 18MM 4728 X 18MM 4728 S 18MM 18.5mm 4728 R 18.5MM mm 4728 R 19MM 4728 X 19MM mm 4728 R 19.5MM mm 4728 R 20MM 4728 X 20MM 4728 S 20MM 20.5mm 4728 R 20.5MM mm 4728 R 21MM mm 4728 R 21.5MM mm 4728 R 22MM 4728 X 22MM 4728 S 22MM 22.5mm 4728 R 22.5MM - - Size Round Hex Square 23.0mm 4728 R 23MM mm 4728 R 23.5MM mm 4728 R 24MM 4728 X 24MM mm 4728 R 24.5MM mm 4728 R 25MM 4728 X 25MM 4728 S 25MM 25.5mm 4728 R 25.5MM mm 4728 R 26MM 4728 X 26MM mm 4728 R 26.5MM mm 4728 R 27MM 4728 X 27MM mm 4728 R 27.5MM mm 4728 R 28MM mm 4728 R 28.5MM mm 4728 R 29MM mm 4728 R 29.5MM mm 4728 R 30MM 4728 X 30MM mm 4728 R 30.5MM mm 4728 R 31MM mm 4728 R 31.5MM mm 4728 R 32MM 4728 X 32MM mm 4728 R 32.5MM mm 4728 R 33MM mm 4728 R 33.5MM mm 4728 R 34MM mm 4728 R 34.5MM mm 4728 R 35MM 4728 X 35MM mm 4728 R 35.5MM mm 4728 R 36MM 4728 X 36MM mm 4728 R 36.5MM mm 4728 R 37MM mm 4728 R 37.5MM mm 4728 R 38MM mm 4728 R 38.5MM mm 4728 R 39MM mm 4728 R 39.5MM mm 4728 R 40MM mm 4728 R 40.5MM mm 4728 R 41MM mm 4728 R 41.5MM mm 4728 R 42MM - - Emergency ollet with soft face and pilot hole 1/8 dia. Type: J550 Telephone: Page 31

32 185E Spring ollets Type: 4291 (lso known as 60) Imperial Round, Hexagon and Square imensions (Metric) Size Round Hex Square 1/ R 1/ /16" 4291 R 3/ /4" 4291 R 1/ X S 1/4 5/16" 4291 R 5/ X S 5/16 3/8" 4291 R 3/ X S 3/8 7/16" 4291 R 7/ X S 7/16 1/2" 4291 R 1/ X S 1/2 9/16" 4291 R 9/ X S 9/16 5/8" 4291 R 5/ X S 5/8 11/ R 11/ X.687-3/4" 4291 R 3/ X S 3/4 13/16" 4291 R 13/ X.812-7/8" 4291 R 7/ X S 7/8 15/16" 4291 R 15/ X.937-1" 4291 R X S 1 1.1/16" 4291 R 1.1/ X /8" 4291 R 1.1/ X S 1.1/8 1.3/16" 4291 R 1.3/ /4" 4291 R 1.1/ X S 1.1/4 1.5/16" 4291 R 1.5/ X /8" 4291 R 1.3/ S 1.3/8 1.7/16" 4291 R 1.7/ /2" 4291 R 1.1/ X S 1.1/2 1.9/16" 4291 R 1.9/ /8" 4291 R 1.5/ X /16" 4291 R 1.11/ /4" 4291 R 1.3/ /16" 4291 R 1.13/ /8" 4291 R 1.7/ /16" 4291 R 1.15/ " 4291 R /16" 4291 R 2.1/ /8" 4291 R 2.1/ /16" 4291 R 2.3/ /4" 4291 R 2.1/ /16" 4291 R 2.5/ Emergency ollet with soft face and pilot hole 1/8 dia. Type: H767 Page 32

33 185E Spring ollets Type: 4291 (lso known as 60) Metric Round, Hexagon and Square imensions (Metric) Size Round Hex Square 3.0mm 4291 R 3MM mm 4291 R 3.5MM mm 4291 R 4MM mm 4291 R 4.5MM mm 4291 R 5MM 4291 X 5MM 4291 S 5MM 5.5mm 4291 R 5.5MM 4291 X 5.5MM 6.0mm 4291 R 6MM S 6MM 6.5mm 4291 R 6.5MM mm 4291 R 7MM 4291 X 7MM 4291 S 7MM 7.5mm 4291 R 7.5MM mm 4291 R 8MM 4291 X 8MM 4291 S 8MM 8.5mm 4291 R 8.5MM mm 4291 R 9MM mm 4291 R 9.5MM mm 4291 R 10MM 4291 X 10MM 4291 S 10MM 10.5mm 4291 R 10.5MM mm 4291 R 11MM 4291 X 11MM mm 4291 R 11.5MM mm 4291 R 12MM 4291 X 12MM 4291 S 12MM 12.5mm 4291 R 12.5MM mm 4291 R 13MM 4291 X 13MM mm 4291 R 13.5MM mm 4291 R 14MM 4291 X 14MM 4291 S 14MM 14.5mm 4291 R 14.5MM mm 4291 R 15MM 4291 X 15MM 4291 S 15MM 15.5mm 4291 R 15.5MM mm 4291 R 16MM 4291 X 16MM 4291 S 16MM 16.5mm 4291 R 16.5MM mm 4291 R 17MM 4291 X 17MM mm 4291 R 17.5MM mm 4291 R 18MM 4291 X 18MM 4291 S 18MM 18.5mm 4291 R 18.5MM mm 4291 R 19MM 4291 X 19MM mm 4291 R 19.5MM mm 4291 R 20MM 4291 X 20MM 4291 S 20MM 20.5mm 4291 R 20.5MM mm 4291 R 21MM mm 4291 R 21.5MM mm 4291 R 22MM 4291 X 22MM 4291 S 22MM 22.5mm 4291 R 22.5MM mm 4291 R 23MM mm 4291 R 23.5MM mm 4291 R 24MM 4291 X 24MM mm 4291 R 24.5MM mm 4291 R 25MM 4291 X 25MM 4291 S 25MM 25.5mm 4291 R 25.5MM mm 4291 R 26MM 4291 X 26MM mm 4291 R 26.5MM mm 4291 R 27MM 4291 X 27MM mm 4291 R 27.5MM - - Size Round Hex Square 28.0mm 4291 R 28MM mm 4291 R 28.5MM mm 4291 R 29MM mm 4291 R 29.5MM mm 4291 R 30MM 4291 X 30MM 4291 S 30MM 30.5mm 4291 R 30.5MM mm 4291 R 31MM mm 4291 R 31.5MM mm 4291 R 32MM 4291 X 32MM 4291 S 32MM 32.5mm 4291 R 32.5MM mm 4291 R 33MM mm 4291 R 33.5MM mm 4291 R 34MM mm 4291 R 34.5MM mm 4291 R 35MM 4291 X 35MM mm 4291 R 35.5MM mm 4291 R 36MM 4291 X 36MM mm 4291 R 36.5MM mm 4291 R 37MM mm 4291 R 37.5MM mm 4291 R 38MM mm 4291 R 38.5MM mm 4291 R 39MM mm 4291 R 39.5MM mm 4291 R 40MM mm 4291 R 40.5MM mm 4291 R 41MM 4291 X 41MM mm 4291 R 41.5MM mm 4291 R 42MM mm 4291 R 42.5MM mm 4291 R 43MM mm 4291 R 43.5MM mm 4291 R 44MM mm 4291 R 44.5MM mm 4291 R 45MM mm 4291 R 45.5MM mm 4291 R 46MM mm 4291 R 46.5MM mm 4291 R 47MM mm 4291 R 47.5MM mm 4291 R 48MM mm 4291 R 48.5MM mm 4291 R 49MM mm 4291 R 49.5MM mm 4291 R 50MM mm 4291 R 50.5MM mm 4291 R 51MM mm 4291 R 51.5MM mm 4291 R 52MM - - Telephone: Page 33