CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG

Transcription

1 powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders 10 REGO-PUS Information 11 Features Benefits 12 CAT+ Toolholders (BIG Plus) 13 BT+ Toolholders (BIG Plus) 14 VI - CY Toolholders 15 powrgrip ER Reductions - Features Benefits 16 CY SSY Toolholders (Softsyncro) 17 X Toolholder - Vibration ecay Chart 18 CAT/ X (Xtended ength Toolholders) 19 BT/ X (Xtended ength Toolholders) 20 TC/ X (Xtended ength Toolholders) 21 HSK/ X (Xtended ength Toolholders) 22 REGO-FIX CAPTO X Toolholders 23 powrgrip Collets - Features Benefits Boring Bar Collets 27 Machine Options - U 9006 C Matching Products

2 powrgrip Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO Marking and part number (reduces selection error). Traceability ot numbers are marked on all products for traceability throughout the entire manufacturing process. Original REGO-FIX Our extensive experience results in a well-engineered system. Original only with the REGO-FIX quality seal r. Guarantees the best quality. T.I.R. of the Whole System < " (3 μm) Highest clamping force and lowest runout. Taper Accuracy AT3 Better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25 Higher clamping force and higher transferable torque. Q+ Balancing 100% balanced to G 22,000 rpm for steep taper holders and G 25,000 rpm for HSK holders. Ideal for High Speed Cutting (HSC) and High Performance Cutting (HPC). Hi-Q Balancing System Ready to accept Hi-Q balancing rings which will allow for the offset of the imbalance introduced by the cutting tool up to 80,000 rpm. Minimal Outside imensions Slim design provides more processing flexibility. Fast Tool clamping with hydraulic press < 10 seconds. Excellent at Small iameters Clamping of small diameter tools from Ø 0.2 mm. Presetable Tooling System Repeatability < " (10 μm) 1

3 powrgrip Home Features Benefits Clamping operation in less than 10 seconds when using the U automatic machine. Clamps all types of toolshanks and materials in h6 tolerance from Ø " 1.0" ( mm) T.I.R. of < " (3 μm) Precise length adjustment repeatability <0.0004" (10 μm) High vibration dampening due to the interupted surfaces between the toolholder to collet and the collet to tool shank. eveloped for optimal productivity such as High Speed Cutting (HSC) and High Performance Cutting (HPC) Highest transferable torque and lowest T.I.R., even after 20,000 tool changes For 5 years or 20,000 cycles, REGO-FIX guarantees the T.I.R. of the powrgrip holder and collet will not exceed and that the impregnated surface treatment will not erode. Transferable Torque of the powrgrip System 2

4 Information Toolholders Applications These toolholders are designed for use on CNC machining centers with automatic tool changers. They are especially suited for High Speed Cutting (HSC) and High Performance Cutting (HPC) operations where processing reaches the machine limits. The vibration dampening of colletholders reduce spindle wear and extend tool life. Balancing REGO-FIX Q+ System toolholders are balanced by design to G 22,000 rpm for steep taper holders and G rpm for HSK holders. H toolholders are ready to accept Hi-Q balancing rings which allow precision balancing of the system up to 80,000 rpm depending on the balancing rings used. Coolant Through For use with coolant through tools. Tool Precise preset repeatability for both HSS and carbide tools Collet Slightly tapered shape maximizes clamping force Peripheral Cooling -CF collets for peripheral cooling with non-coolant through tools. Matched Tooling System for Best Fit For highest precision and best results the whole system counts. For that reason REGO-FIX components are carefully matched to fit together. This guarantees best run-out and balancing. Holder Superior runout and vibration dampening in a variety of taper styles 3

5 CAT CAT Toolholders Standard Form B [inch] Balancing Rings CAT 40 / 10 x 3.5" H FWR 285 CAT 40 / 10 x 6" H FWR 285 CAT 40 / 15 x 3.15" H FWR 285 CAT 40 / 15 x 4" H FWR 285 CAT 40 / 15 x 6" H FWR 325/285 CAT 40 / 25 x 3.15" H FWR 405 CAT 40 / 25 x 4" H FWR 405 CAT 40 / 25 x 6" H FWR 405/405 CAT 40 / 32 x 3.5 H* CAT 40 / 32 x 4.3" H FWR 505 CAT 40 / 32 x 6" H FWR 505/505 CAT 50 / 10 x 4 H FWR 405 CAT 50 / 15 x 4 H FWR 405 CAT 50 / 25 x 4" H FWR 505 CAT 50 / 25 x 6" H FWR 505/405 CAT 50 / 32 x 4.3" H FWR 505 CAT 50 / 32 x 6" H FWR 505/505 *Not for use with balancing rings. Standard Form B 4

6 TC TC Toolholders (IN 69871) Standard Form B Balancing Rings TC 30 / 10 x 060* TC 30 / 10 x 073 H FWR 285 TC 30 / 15 x 060* TC 30 / 15 x 080 H FWR 285 TC 30 / 15 x 120 H FWR 285 TC 30 / 25 x 080* TC 30 / 25 x 160 H FWR 405 TC 40 / 10 x 080 H FWR 285 TC 40 / 10 x 120 H FWR 285 TC 40 / 10 x 160 H FWR 325 TC 40 / 15 x 072* TC 40 / 15 x 080 H FWR 285 TC 40 / 15 x 120 H FWR 325 TC 40 / 15 x 160 H FWR 325/285 TC 40 / 25 x 072* TC 40 / 25 x 080 H FWR 405 TC 40 / 25 x 120 H FWR 405 TC 40 / 25 x 160 H FWR 405/405 TC 40 / 32 x 080* TC 50 / 25 x 081* TC 50 / 25 x 100 H FWR 505 TC 50 / 25 x 160 H FWR 505/405 TC 50 / 25 x 200 H FWR 505/405 TC 50 / 32 x 080* *Not for use with balancing rings. Standard Form B 5

7 BT BT Toolholders Standard Form B Balancing Rings BT 30 / 6 x BT 30 / 6 x 100 H BT 30 / 10 x 062* BT 30 / 10 x 080 H FWR 285 BT 30 / 10 x 120 H FWR 285 BT 30 / 10 x 160 H FWR 285 BT 30 / 15 x 070 H FWR 285 BT 30 / 15 x 120 H FWR 285 BT 30 / 25 x 080 H FWR 405 BT 30 / 25 x 120 H FWR 405 BT 30 / 25 x 160 H FWR 405/405 BT 40 / 10 x 080 H FWR 285 BT 40 / 10 x 120 H FWR 325 BT 40 / 10 x 160 H FWR 325 BT 40 / 15 x 080 H FWR 285 BT 40 / 15 x 120 H FWR 325 BT 40 / 15 x 160 H FWR 325/285 BT 40 / 25 x 080 H FWR 405 BT 40 / 25 x 120 H FWR 405 BT 40 / 25 x 160 H FWR 405/405 BT 40 / 32 x 086* BT 50 / 10 x 120 H FWR 405 BT 50 / 10 x 160 H FWR 405 BT 50 / 15 x 120 H FWR 325 BT 50 / 15 x 160 H FWR 325 BT 50 / 25 x 100* BT 50 / 25 x 120 H FWR 505 BT 50 / 25 x 160 H FWR 505/405 BT 50 / 25 x 200 H FWR 505/405 BT 50 / 32 x 100* * Not for use with balancing rings Standard Form B 6

8 CY Extensions 1 h6 1 rawing CY 10 / 6 x CY 10 / 10 x CY 20 / 10 x CY 20 / 10 x CY 20 / 10 x CY 20 / 15 x CY 25 / 15 x CY 1 / 25 x CY 25 / 25 x CY 25 / 25 X CY 25 / 25 X BT OM Toolholders OM Standard 1 2 G 1 Balancing Rings BT-OM 30 / 15 x 070 H M FWR 285 BT-OM 30 / 25 x 080 H M FWR 405 OM holders have no drive keys 7

9 HSK HSK - Form A & E Holders Balancing Rings HSK-A 32 / 15 x 075* HSK-A 40 / 6 x 048* HSK-A 40 / 15 x 080 H FWR 285 HSK-A 40 / 25 x 100 H FWR 405 HSK-A 50 / 10 x 080 H FWR 285 HSK-A 50 / 15 x 080 H FWR 285 HSK-A 50 / 25 x 100 H FWR 405 HSK-A 63 / 10 x 080 H FWR 325 HSK-A 63 / 10 x 120 H FWR 325 HSK-A 63 / 10 x 160 H FWR 325 HSK-A 63 / 10 x 200 H FWR 325 HSK-A 63 / 15 x 080 H FWR 325 HSK-A 63 / 15 x 120 H FWR 325 HSK-A 63 / 15 x 160 H FWR 325/285 HSK-A 63 / 25 x 100 H FWR 405 HSK-A 63 / 25 x 120 H FWR 405 HSK-A 63 / 25 x 160 H FWR 405/405 HSK-A 63 / 32 x 100* HSK-A 63 / 32 x 120 H FWR 505 HSK-A 80 / 15 x 085 H FWR 325 HSK-A 80 / 25 x 100 H FWR 505 HSK-A 80 / 32 x 105 H FWR 505 HSK-A 100 / 10 x 085 H FWR 405 HSK-A 100 / 10 x 160 H FWR 405 HSK-A 100 / 15 x 085 H FWR 405 HSK-A 100 / 15 x 160 H FWR 405/285 HSK-A 100 / 25 x 100 H FWR 505 HSK-A 100 / 25 x 160 H FWR 505/405 HSK-A 100 / 25 x 200 H FWR 505/405 HSK-A 100 / 32 x 106 H FWR 505 HSK-E 25 / 6 x 043* HSK-E 25 / 10 x 055* HSK-E 32 / 6 x 048* HSK-E 32 / 10 x 060* HSK - Form E & F Holders Continued Balancing Rings HSK-E 32 / 10 x 080 H FWR 225 HSK-E 32 / 15 x 075* HSK-E 40 WM / 6 x 048* HSK-E 40 WM / 10 x 052* HSK-E 40 WM / 10 x 062* HSK-E 40 / 6 x 048* HSK-E 40 / 10 x 062* HSK-E 40 / 10 x 080 H FWR 225 HSK-E 40 / 10 x 120 H FWR 225 HSK-E 40 / 10 x 160 H FWR 285 HSK-E 40 WM / 15 x 064* HSK-E 40 / 15 x 080 H FWR 285 HSK-E 40 / 15 x 120 H FWR 285 HSK-E 40 / 25 x 090* HSK-E 40 / 25 x 100 H FWR 405 HSK-E 50 / 10 x 080 H FWR 285 HSK-E 50 / 10 x 120 H FWR 285 HSK-E 50 / 10 x 160 H FWR 285 HSK-E 50 / 15 x 080 H FWR 285 HSK-E 50 / 15 x 120 H FWR 285 HSK-E 50 / 25 x 100 H FWR 405 HSK-F 63 / 10 x 080 H FWR 325 HSK-F 63 / 15 x 080 H FWR 325 HSK-F 63 / 25 x 100 H FWR 405 HSK-F 63 / 32 x 100* HSK-F 80 Call For Availability *Not for use with balancing rings. 8

10 REGO-FIX CAPTO REGO-FIX CAPTO Holders Balancing Rings C3 / 10 x 055* C3 / 15 x 067* C4 / 10 x 060* C4 / 10 x 080 H FWR 225 C4 / 15 x 062* C4 / 15 x 080 H FWR 285 C5 / 10 x 060* C5 / 10 x 080 H FWR 285 C5 / 10 x 120 H FWR 285 C5 / 15 x 065* C5 / 15 x 080 H FWR 285 C5 / 15 x 120 H FWR 325 C5 / 25 x 080* C5 / 25 x 100 H FWR 405 C6 / 10 x 080 H FWR 325 C6 / 10 x 120 H FWR 325 C6 / 10 x 160 H FWR 325 C6 / 15 x 080 H FWR 325 C6 / 15 x 120 H FWR 325 C6 / 15 x 160 H FWR 325 C6 / 25 x 085* C6 / 25 x 100 H FWR 405 C6 / 25 x 120 H FWR 405 C6 / 25 x 160 H FWR 405 C6 / 32 x 090* C8 / 25 x 092* C8 / 32 x 090* *Not for use with balancing rings. 9

11 Information As a icensed BIG Plus manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most accurate dual contact holders that can be produced. REGO-PUS toolholders are balanced by design to 22,000 rpm and are designed for coolant through the flange (form B) and coolant through the taper (form A) as a standard to meet your machining requirements. Increased toolholder stiffness due to taper and face contact Improved machining accuracy and better surface finish Form A+B coolant supplied as standard Compatible with BIG-Plus spindles and standard spindles Manufactured in Switzerland under icense according to BIG-Plus specifications BIG PUS SYSTEM icensed by BIG aishowa Available in ER and powrgrip Systems Flange Contact Taper Contact Coolant supply through the flange (form B) 10 Coolant supply through the taper (form A)

12 REGO-PUS Toolholders Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO Marking and part number (reduces selection error). Traceability ot numbers are marked on all products for traceability throughout the entire manufacturing process. REGO-FIX / BIG icensed by BIG aishowa for BIG Plus Spindles. Coolant Through All holders are form A for coolant through the taper and form B for coolant through the flange as a standard. Q+ Balancing 100% balanced to 22,000 rpm. Matched Tooling System for Best Fit For highest precision and best results the whole system counts. For that reason REGO-FIX components are carefully matched for optimum fit and accuracy. This guarantees the best run-out and balance. TIR of the System REGO PUS run-out of or better when using the REGO-FIX powrgrip System. BIG-PUS SYSTEM - icensed by BIG aishowa 11

13 CAT + CAT+ 40 Toolholders Standard [inch] Balancing Rings CAT+ 40 / 10 x 3.5" H FWR 285 CAT+ 40 / 10 x 6" H FWR 285 CAT+ 40 / 15 x 3.15" H FWR 285 CAT+ 40 / 15 x 6" H FWR 325/285 CAT+ 40 / 25 x 3.15" H FWR 405 CAT+ 40 / 25 x 6" H FWR 405/405 CAT+ 40 / 32 x CAT+ 40 / 32 x FWR 505/405 CAT+ 50 Toolholders Standard [inch] Balancing Rings CAT+ 50 / 10 x 4" H FWR 405 CAT+ 50 / 15 x 4" H FWR 405 CAT+ 50 / 25 x 4" H FWR 505 CAT+ 50 / 25 x 6" H FWR 505/405 CAT+ 50 / 32 x 4.3" H FWR 505 CAT+ 50 / 32 x 6 H FWR 505/505 BIG-PUS SYSTEM - icensed by BIG aishowa 12

14 BT + BT+ 30 Toolholders Standard Balancing Rings BT+ 30 / 10 x 080 H FWR 285 BT+ 30 / 15 x 070 H FWR 285 BT+ 30 / 25 x 080 H FWR 405 BT +30 / 25 x 160H FWR 405/405 BT+ 40 Toolholders Standard Balancing Rings BT+ 40 / 10 x 080 H FWR 285 BT+ 40 / 10 x 120 H FWR 325 BT+ 40 / 15 x 080 H FWR 285 BT +40 / 15 x 120H FWR 325 BT+ 40 / 25 x 080 H FWR 405 BT+ 40 / 25 x 120 H FWR 405 BT+ 40 / 25 x 160 H FWR 405/405 BT+ 50 Toolholders Standard Balancing Rings BT+ 50 / 25 x 120 H FWR 505 BT+ 50 / 25 x 160 H FWR 505/405 BIG-PUS SYSTEM - icensed by BIG aishowa 13

15 VI VI Toolholders 1 1 VI 30 / 15 x VI 30 / 25 x VI 40 / 15 x VI 40 / 25 x VI 50 / 15 x VI 50 / 25 x The VI holder program brings the benefits to lathes that until now, only milling machines have taken advantage of for years. These include better TIR, improved tool dampening, easier presetting, longer tool life and unparalleled clamping forces. Cylindrical Cylindrical Toolholders 1 1 CY-T 25 / 15 x CY-T 32 / 15 x CY-T 32 / 25 x CY-T 40 / 15 x CY-T 40 / 25 x CY-T 1 / 15 x CY-T 1 1/4 / 15 x / CY-T 1 1/4 / 25 x / CY-T 1 1/2 / 15 x / CY-T 1 1/2 / 25 x / The Cylindrical Turning holders have all of the features that you expect from the system, now available for machines that require cylindrical holders. Available in the most common mounting block and turret diameters, these holders will bring new precision and repeatability to any machine application.

16 Swiss Quick Tool Changing System Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO Marking and part number (reduces selection error). Traceability ot numbers are marked on all products for traceability throughout the entire manufacturing process. Original REGO-FIX Our extensive experience results in a well-engineered system. Original only with the REGO-FIX quality seal r. Guarantees the best quality. ocking Ring Special locking ring to insure that the collet body is removed with the nut. Matched Tooling System for Best Fit For highest precision and best results the whole system counts. For that reason REGO-FIX components are carefully matched for optimum fit and accuracy. This guarantees the best run-out and balance. TIR of the System run-out of or better when using the REGO- FIX powrgrip System. ER run-out of or better with a REGO-FIX UP Collet powrgrip / ER Reductions Fine Thread Main Nut ER 20 M / ER 25 M / Coarse Thread Main Nut ER 20 / ER 25 / U Automatic or C hand-pump is required for use with the powrgrip System 15

17 CY SSY IN 1835 B+E Softsynchro Tapping Holder HSK-A SSY/ Softsynchro Tapping Holders Applications REGO-FIX Softsynchro tapping holders are used on machines that are designed for direct tapping. Many of the newer CNC machines feature synchronization between spindle feed and thread pitch. This allows to use rigid tapping holders. However due to the dynamics of spindle and linear motors synchronization errors occur. To compensate for these synchronization errors Softsynchro tapping holders with minimal length adjustment are necessary. epending on the application Softsynchro tapping holders increase tool life up to 150%. Compression Tension HSK-A 63 SSY / HSK-A 63 SSY / Comparison Tests The two diagrams show the axial forces when coldforming M10 threads in St37 steel. Conclusion: Axial forces increase with increasing rpm. With REGO-FIX Softsynchro tapping holders the forces are considerably lower than when using rigid tapping toolholders. Therefore the surface quality and tool life is optimized when using Softsynchro tapping holders on a synchronized machine spindle. CY SSY/ Softsynchro Tapping Holders 1 1 Compression Tension CY 25 SSY / CY 25 SSY / rehzahl 2000 min Axialkraft [N] rehzahl 500 min Zeit [s] rehzahl 2000 min -1 Axialkraft [N] Zeit [s] REGO- FIX Softsynchro -Gewindeschneidfutter Mitbewerber Synchron-Werkzeugaufnahme Starre Synchron-Werkzeugaufnahme

18 REGO-FIX Xtended ength Toolholder with MF Technology. This New MICRO-FRICTION AMPENING (MF) technology (pat. pending) from REGO-FIX allows the holders to dissipate vibrations faster than standard long reach holders. ampening the vibrations faster means that your cutting tool, part and spindle will see less vibrations resulting in better surface finishes, longer tool life and less spindle wear. Vibration ecay Chart REGO-FIX X Toolholder Beschleunigung in m/s 2 / Acceleration in m/s 2 Acceleration in m/s Standard toolholder Time in ms Zeit in ms / Time in ms Acceleration in m/s Machining parameters have to be adapted to the gauge length of the Xtended ength Toolholders Time in ms

19 CAT X ANSI B5.50 CAT X Toolholders Holder is mono-block design and does not feature vibration dampening technology. 2 3 [inch] CAT40 / 10 x 8 X CAT40 / 10 x10 X CAT40 / 10 x 12 X CAT40 / 10 x 14 X CAT40 / 15 x 8 X CAT40 / 15 x 10 X CAT40 / 15 x 12 X CAT40 / 15 x 14 X CAT40 / 25 x CAT40 / 25 x10 X CAT40 / 25 x14 X CAT50 / 10 x 8 X CAT50 / 10 x 10 X CAT50 / 10 x 12 X CAT50 / 10 x 14 X CAT50 / 15 x 8 X CAT50 / 15 x 10 X CAT50 / 15 x 12 X CAT50 / 15 x 14 X CAT50 / 25 x10 X CAT50 / 25 x14 X [inch] 18

20 BT X MAS 403 BT X Toolholders BT40 / 10 x 220 X BT40 / 10 x 260 X BT40 / 10 x 300 X BT40 / 10 x 320 X BT40 / 10 x 360 X BT40 / 10 x 400 X BT40 / 15 x 220 X BT40 / 15 x 260 X BT40 / 15 x 300 X BT40 / 15 x 320 X BT40 / 15 x 360 X BT40 / 15 x 400 X BT40 / 25 x 226 X BT40 / 25 x 326 X BT50 / 10 x 240 X BT50 / 10 x 260 X BT50 / 10 x 300 X BT50 / 10 x 340 X BT50 / 10 x 360 X BT50 / 10 x 400 X BT50 / 15 x 240 X BT50 / 15 x 260 X BT50 / 15 x 300 X BT50 / 15 x 340 X BT50 / 15 x 360 X BT50 / 15 x 400 X BT50 / 25 x 240 X BT50 / 25 x 340 X

21 TC X IN TC X Toolholders TC40 / 10 x 220 X TC40 / 10 x 260 X TC40 / 10 x 300 X TC40 / 10 x 320 X TC40 / 10 x 360 X TC40 / 10 x 400 X TC40 / 15 x 220 X TC40 / 15 x 260 X TC40 / 15 x 300 X TC40 / 15 x 320 X TC40 / 15 x 360 X TC40 / 15 x 400 X TC40 / 25 x 220 X TC40 / 25 x 320 X TC50 / 10 x 240 X TC50 / 10 x 300 X TC50 / 10 x 340 X TC50 / 10 x 400 X TC50 / 15 x 240 X TC50 / 15 x 300 X TC50 / 15 x 340 X TC50 / 15 x 400 X TC50 / 25 x 320 X

22 HSK X IN HSK X Toolholders HSK-A 63 / 10 x 240 X HSK-A 63 / 10 x 260 X HSK-A 63 / 10 x 300 X HSK-A 63 / 10 x 340 X HSK-A 63 / 10 x 360 X HSK-A 63 / 10 x 400 X HSK-A 63 / 15 x 240 X HSK-A 63 / 15 x 260 X HSK-A 63 / 15 x 300 X HSK-A 63 / 15 x 340 X HSK-A 63 / 15 x 360 X HSK-A 63 / 15 x 400 X HSK-A 63 / 25 x 240 X HSK-A 63 / 25 x 260 X HSK-A 63 / 25 x 340 X HSK-A 63 / 25 x 360 X HSK-A 100 / 10 x 240 X HSK-A 100 / 10 x 300 X HSK-A 100 / 10 x 340 X HSK-A 100 / 10 x 400 X HSK-A 100 / 15 x 240 X HSK-A 100 / 15 x 300 X HSK-A 100 / 15 x 340 X HSK-A 100 / 15 x 400 X HSK-A 100 / 25 x 246 X HSK-A 100 / 25 x 346 X

23 REGO-FIX CAPTO X REGO-FIX CAPTO X Toolholders C6 / 10 x 225 X C6 / 10 x 240 X C6 / 10 x 260 X C6 / 10 x 300 X C6 / 10 x 325 X C6 / 10 x 340 X C6 / 10 x 360 X C6 / 10 x 400 X C6 / 15 x 225 X C6 / 15 x 240 X C6 / 15 x 260 X C6 / 15 x 300 X C6 / 15 x 325 X C6 / 15 x 340 X C6 / 15 x 360 X C6 / 15 x 400 X C6 / 25 x 230 X C6 / 25 x 330 X C8 / 10 x 232 X C8 / 10 x 332 X C8 / 15 x 232 X C8 / 15 x 332 X C8 / 25 x 230 X C8 / 25 x 330 X

24 powrgrip Collets Features Benefits Swiss Quality Made in Switzerland to ISO9001/ISO Marking With type and size (reduces collet selection error). Product Traceability ot number marked on collets, therefore traceable through entire manufacturing process. Original REGO-FIX When buying collets please note the REGO-FIX quality seal r on the front of the collet. 1 Precision Highest T.I.R. < Accurate ength Adjustment <10 μm With integrated adjustment screw. Clamping of all h6 Tool Shanks Cylindrical, WEON, Whistle-Notch Clamping of all Shank Materials Solid carbide and HSS tool shanks. Clamping iameters 0.2 to 25.4 mm Fast Clamping in less than 10 seconds. Simple Handling Parameters are automatically set. High Vibration ampening High vibration dampening due to the interface surfaces between the toolholder to collet and the collet to tool shank. Highest Transferable Torque The powrgrip system yields the highest transferable torque of all comparable systems. Productivity and Tool ife Specially designed to allow for maximum machining capability

25 powrgrip Collets 6 Collets ia. (mm) ia. (inch) 6 6CF / Collets ia. (mm) ia. (inch) 10 10CF / / / / Collet Options Collets do not have a clamping range. Nominal diameter only. Requires h6 tolerance shanks REGO-FIX Standard collet REGO-FIX Coolant Flush collet 24

26 powrgrip Collets 15 Collets 25 & 32 Collets ia. (mm) 25 ia. (inch) Collet Options REGO-FIX Standard collet 15 15CF / / / / / REGO-FIX Coolant Flush collet ia. (mm) ia. (inch) 25 25CF 32 32CF / / / / / / / / / / / /

27 Boring Bar Collets -T The boring bar collets bring the ability to transform your normal holder into a boring bar holder without losing accuracy or repeatability. The collets are designed to hold the cylindrical boring bar and position it correctly in the holder. Boring Bar Collets Ø Ø [inch] 15-T 25-T /4" /8" / /

28 U 9006 C 2506 Automatic Machine & Inserts escription U 9006 A (6-32) V Machine USA/Canada A clamping insert A clamping insert A clamping insert A clamping insert A clamping insert U 9006 automatic clamping unit with push-button operation and auto clamping insert recognition. esigned to make operation easy, fast and reliable. Easy interchangeable inserts and safety interlocks make the machine safe for all operators. Handpump & Inserts escription Measurement W x x H Incl. Taper Cleaner C powrgrip Compact hydraulic clamping unit 450 x 492 x 280 APC Insert for C 2506 for 25 toolholders APC Insert for C 2506 for 15 toolholders APC Insert for C 2506 for 10 toolholders APC Insert for C 2506 for 6 toolholders C hand pumps offer a price advantage over the U units while still performing the task of pressing in tools. The operator actuates the pressure by use of the lever arm until the desired pressure is achieved. 27

29 Matching Products Presetting Tool escription VEW Presetting tool for 6 colletholder VEW Presetting tool for 10 colletholder VEW Presetting tool for 15 colletholder VEW Presetting tool for 25 colletholder VEW Presetting tool for 32 colletholder The powrgrip presetting tool accepts the powrgrip collets, and is inserted into the toolholder. The tool has a small thumb wheel for precise tool length adjustments, and allows maximum repeatability in the toolholder assembly. Taper Cleaner escription TKCP Taper cleaner for 6 colletholder TKCP Taper cleaner for 10 colletholder TKCP Taper cleaner for 15 colletholder TKCP Taper cleaner for 25 colletholder TKCP Taper cleaner for 32 colletholder Provides a quick and easy method of cleaning the powrgrip holder bore of oil and debris before insertion of the tool. Cleaning Paper Set escription CPS Cleaning paper set for TKCP 6 / 250 papers CPS Cleaning paper set for TKCP 10 / 250 papers CPS Cleaning paper set for TKCP 15 / 250 papers CPS Cleaning paper set for TKCP 25 / 250 papers CPS Cleaning paper set for TKCP 32 / 250 papers A soft, absorbant paper specially prepared for cleaning the powrgrip holder bore. The paper is lint-free and chemically neutral. For one time use only! Each pack contains 250 papers. 28