1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
|
|
- Dwight Watson
- 6 years ago
- Views:
Transcription
1 1 Type T apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody S/ - Load Return igh Tonnage S/ - Lock Nut S/ - Pull Precision ouble cting S/ - ed S/ - luminum S/ - luminum ollow ole / - luminum ollow ole S/ - luminum Lock Nut 02 2, 2.5 Tons 04 4 Tons 05 5 Tons 09 9 Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons T XT Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons Tons 1,000 1,000 Tons 1,500 1,500 Tons With internal s, Series only No internal s, Series only lat ody Kit "/16mm 01 1"/ 25 mm 02 2"/ 51 mm 04 4"/ 102 mm 05 5"/ 127 mm 06 6"/ 152 mm 08 8"/ 203 mm 10 10"/ 254mm 12 12"/ 305mm 13 13"/ 330mm 14 14"/ 356mm 18 18"/ 457mm 20 20"/ 508mm 24 24"/ 610mm 32 32"/ 813mm ccessories See the assortment of accessories designed to work with our products. pg 40 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 eavy duty, heat treated, grooved saddle provides better surface traction during operation wiper seals out dirt and contamination Steel stop ring for plunger over travel protection Industrial hard chrome plated plunger prevents scratching and corrosion One piece steel plunger stopper for extra strength and preventing over travel s are burnish rolled giving a reduces scoring and prolongs seal life Polyurethane cup seal provides optimum performance One piece high grade alloy bearing for side load protection and long life Rectangular return spring design eliminates spring breakage and provides quicker retraction conventional couplers 4
2 Range (tons) Range (in) Single cting s U igh Tonnage Single cting s luminum Single cting s s L lat ody s ollow s LN Lock Nut s LN s T ed s P Pull s P Precision ouble cting s ouble cting s U igh Tonnage ouble cting s luminum ouble cting s ouble cting ole s - ccessories Pump Matching hart Page 44 Page 60 5
3 Series - eneral Purpose, Spring Return apacity: Tons Stroke: mm 700 R mm * Larger Tonnages or tonnages that exceed 100, please refer to our Section pg Single cting 1506 in the collapsed position with 15 cylinder base for safety. Single cting 5513 in the collapsed position ready to lift a load Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. ollar threads and base ard chrome plated piston plunger protects against corrosion and damage Polyurethane U-up seals provide a sure seal and long life Solid one piece alloy steel body One piece aluminum alloy bearing protects against cylinder wall damage dust cap is standard on all cylinders U Series luminum s luminum cylinders make a great lightweight alternative being up to 60% lighter than comparable steel models. pg14 6
4 Quick Selection uide apacity Stroke ollapsed Oil apacity 5 Ton 44 kn Series ccessories See the assortment of accessories designed to work with our products. pg40 s Ton 89 kn ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, ose pg and Pump Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 15 Ton 133 kn Safety Instructions section to review the best methods of operation. pg lways be prepared Ton 222 kn igh-low ouplers igh-low oupler: 38 is Ton 267 kn 55 Ton 489 kn 75 Ton 667 kn 100 Ton 890 kn * * * * * * * * ST05 05 s ST10 10 s ST15 15 s ST25 25 s ST55 Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. Match up these saddles with the following cylinders: 55, 75, 100 s pg 41 * is equipped with carrying handle. 7
5 Series - Spring Return apacity Stroke ffective rea (cm 2 ) Oil apacity Ton 44 kn Y X 10 Ton 89 kn K J L 15 Ton 133 kn /8"-18NPT 25 Ton 222 kn Z Ton 267 kn 55 Ton 489 kn * * * Ton 667 kn 100 Ton 890 kn * * * * * * is equipped with carrying handle. 8
6 ollapsed ore Outside ia. ia. Saddle ia. ase to Inlet Port ollar ollar Length L Internal J Length K ase Mounting ole olt ircle X Y ½ -16N 28 ¾ -16UN ¼ -20UN ½ -16N 28 ¾ -16UN ¼ -20UN ½ -16N 28 ¾ -16UN ¼ -20UN ½ -16N 28 ¾ -16UN ¼ -20UN ½ -16N 28 ¾ -16UN ¼ -20UN ¼ -14UN / 16-18UN ¼ -14UN UN / 16-18UN ¼ -14UN UN / 16-18UN ¼ -14UN UN / 16-18UN ¼ -14UN UN / 16-18UN ¼ -14UN UN / 16-18UN ¼ -14UN UN / 16-18UN ¼ -14UN UN / 16-18UN ¾ -16UN UN ¾ -16UN UN ¾ -16UN UN ¾ -16UN UN ¾ -16UN UN ¾ -16UN UN ¾ -16UN UN ¾ -16UN UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN / 16-12N 49 1½ -16UN ½ -13UN UN ½ -13UN UN ½ -13UN * UN ½ -13UN * UN ½ -13UN * UN ½ -13UN * ¾ -12UN ¾ -10UN * ¾ -12UN ¾ -10UN * ¼ -12UN * / 8-12UN ¾ -10UN * / 8-12UN ¾ -10UN 25 epth Z s * is equipped with carrying handle. 9
7 series - eavy Lifting, Load Return apacity: Tons Stroke: mm 700 R mm low ontrol Valves ontrol the speed of your control valve. pg 62 Related Product: oses We offer a variety of and materials. pg 67 as/iesel ngine Pumps These cylinders pair up well with a as or iesel ngine pump. We gas/diesel engine pumps. ontact your local V dealer for more details. lectric Motor Pumps These cylinders pair up well with lectric Motor pumps. ontact your local V dealer for more details. as engine pump will provide 700 R. hydraulic force at remote locations diesel engine. Ideal for applications where electricity Two speed pump designed for rapid cylinder advance as pump features a sturdy protective roll cage for use in the toughest environments Optional electric start with iesel ngine Meets OS regulations for Two speed pump designed for rapid cylinder advance to prevent pump damage 100% uty ycle T motors ll hand pendants are wired at 24V for safety ull load starting capability 10
8 Quick Reference uide apacity Stroke ollapsed Oil apacity Series s 100 Ton 890 kn 150 Ton 1334 kn 200 Ton 1779 kn 300 Ton* 2669 kn 400 Ton* 3559 kn 500 Ton* 4448 kn 600 Ton* 5338 kn 800 Ton* 7117 kn 1000 Ton* 8896 kn Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to pg 41 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 igh-low ouplers igh-low oupler: 38 is *vailable on request: no stock item See next pages (pg.12-13) to view more detail stats on igh Tonnage Single cting s. 11
9 Series - eavy Lifting, Load Return 3/8"-18NPT Z Optional Tilt-Saddles X Y Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to pg 41 igh-low ouplers igh-low oupler: 38 is Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 Safety Instructions section to review the best methods of operation. lways be prepared. pg 102 apacity 100 Ton 890 kn 150 Ton 1334 kn 200 Ton 1779 kn 300 Ton* 2669 kn 400 Ton* 3559 kn 500 Ton* 4448 kn 600 Ton* 5338 kn 800 Ton* 7117 kn 1000 Ton* 8896 kn Stroke ffective rea (cm 2 ) Oil apacity * vailable on request: no stock item 12
10 Series s Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. ollapsed ore ia. Outside ia. ia. Saddle ia. ase To Inlet Port olt ircle X ase Mounting oles Size M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M24 38 epth Z 13
11 U Series - eneral Purpose, Spring Return, Lightweight apacity: Tons Stroke: mm 700 R U mm U10006 U2006 Lightweight aluminum alloy construction Up to 60% lighter than comparable tonnage steel cylinders onvenient carry handle on 50 and 100 ton models provides extra protection against corrosion and wear Integral steel protective plate Maximum working pressure: 10,000 psi / 700 bar luminum cylinders provide a great alternative to the traditional steel cylinder in many applications. eing up to 60% lighter in weight, luminum cylinders are easier portable and these cylinders should NOT be used in high cycle applications. The V luminum cylinders are designed for a maximum safety rating of 5,000 cycles. Under normal lifting applications this should provide a long service life. Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. igh-low ouplers igh-low oupler: 38 is U5506 luminum s 60% lighter in weight than steel asier portable and reduces user fatigue Not to be used for high cycle applications Under normal conditions, the maximum rated safety cycle life is 5,000 cycles ase of the cylinder contains a steel plate* Steel s 5506 Much heavier than aluminum cylinders Low portability on heavier cylinders which creates user fatigue and strain Will out-perform aluminum cylinders in higher cycle applications an exceed aluminum cylinders maximum safety cycle life of 5,000 cycles. *The base of the cylinders contain a steel plate with mounting holes that are designed to protect the cylinder mounting plates for lifting stability. They are NOT designed to withstand the full ratings of the cylinders. 14
12 U Series Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 s Related Product: oses We offer a variety of and materials. pg 67 Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 apacity Stroke ffective rea (cm²) Oil apacity ollapsed ore ia. Outside ia. ia. Saddle ia. ase to Inlet Port 20 Ton 178 kn 30 Ton 267 kn 50 U U U U U U U5502* Ton 445 kn 100 U5504* U5506* U5508* U5510* U10002* Ton 890 kn 102 U10004* U10006* U10010* * re equipped with carrying handles. 15
13 L Series - Low learance Lifting wiper helps seal out dirt and contamination Specially designed return spring provides quick retraction and extends the life of the spring ard chrome plated plunger helps prevent scratching and corrosion end is grooved to reduce load slippage L1001, L2002, and L3002 coupler is tilted 5 for added clearance L Series Y Z X 5 3/8"-18NPT apacity Stroke 10 Ton 89 kn 20 Ton 178 kn 30 Ton 267 kn 50 Ton 445 kn 100 Ton 890 kn ffective rea (cm 2 ) Oil apacity 38 L L L L L ollapsed ore iameter Outside iameter iameter olt ircle X Mounting Y epth Z L M4 8 L M4 8 L M5 8 L M5 8 L M8 3 16
14 Press truck wheel from nave with the mini-press. its between the chassis and wheel. Low learance Lifting Ideal for pushing applications wiper helps seal out dirt and contamination Return spring ensures a quick retraction and extends the life of the spring Industrial hard chrome plated plunger helps prevent scratching and corrosion ers that conveniently snap into the base of the plunger onvenient storage case s L Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Related Product: oses We offer a variety of and materials. pg 67 igh-low ouplers 76 mm dapter 25 mm dapter 51 mm dapter 38 mm Saddle L igh-low oupler: 38 is apacity Stroke ffective rea (cm 2 ) ollapsed w/o adapter Internal Pressure at apacity (R) ousing iameter iameter 10 Ton 89 kn L STL50 STL100 STL10 escription STL10 21 L1001 Kit STL50 29 L2002/L3002/L 5002 STL L
15 xtremely Low Lifting xtremely low collapsed height for applications with minimal clearance at the lift point Maximum working pressure 10,000 psi / 700 bar Y Series 2 X 3/8-18NPT L 1 M 5006 in the collapsed position ready to lift a load with a P1500 foot pump. apacity Stroke ffective rea (cm 2 ) Oil apacity 5 Ton / 44 kn Ton / 44 kn * Ton / 89 kn Ton / 178 kn Ton / 267 kn Ton / 445 kn Ton / 667 kn Ton / 890 kn Ton / 1495 kn ollapsed ore ia. Outside ia. ia. ase to Inlet Port to ase L to Mtg. ole M ole Pitch X ole ia. Y ounter ore ia x * x x x x x x x x ounter ore epth 18
16 Series - Kits Various height stackable magnetic adapters eliminate dangerous cribbing onvenient carrying case Magnetic adapters are stackable U.S. Patent No.7,237,762 2 s Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. Magnet Shim igh-low ouplers igh-low oupler: 38 is Magnet Shim apacity Stroke Oil apacity ollapsed dapter imensions 5 Ton 44 kn 10 Ton 89 kn 20 Ton 178 kn 30 Ton 267 kn 50 Ton 445 kn **
17 Series 1201T 6006T apacity: Tons Stroke: mm 700 R mm ere is a 6006T in a pulling application. 3002T Ideal for pulling and pushing applications eavy duty compression spring ual wipers help prevent contamination ollar thread protector XT cylinders do not have internal plunger threads 60 and 100 Ton models are equipped with carrying handles apacity Stroke ffective rea (cm 2 ) Oil apacity ollapsed ore ia. O.. 12 Ton 107 kn 20 Ton 178 kn 30 Ton 267 Ton 60 Ton 534 kn 100 Ton 890 kn T XT XT T T T T T* T* T*
18 J K L Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s 3/8-18NPT ombo Kits Most cylinders are available in easy to order kits: cylinder, gauge, couplers, hose pg and pump. 60 Z Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 Y X Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 igh-low ouplers igh-low oupler: 38 is I.. O.. Internal J Internal Length K ollar iameter Length L ase to Inlet Port olt ircle X ase Mounting ole Y 1201T* * XT* XT T T T T T** T** T** epth Z 21
19 LN Series - eavy Lifting w/ Mechanical Lock Nut LN15006 apacity: Tons Stroke: mm 700 R LN mm Single acting cylinder with mechanical safety lock nut esigned to support loads without hydraulic pressure from over travel Load return Solid steel cylinder body lectroless nickel plated plunger to resist corrosion and rust Maximum working pressure: 10,000 psi / 700 bar ST55 ST200 LN10012 Optional Tilt Saddles LN55, LN100 s LN150, LN200 s ST250 LN250 ST300 LN300 Saddles tilt to a 5 max to adjust to the load. pg 41 (42) LN5508 lock nut cylinders lifting the Jordan ridge in hesapeake, V. LN10002 apacity 55 Ton 489 kn 100 Ton 890 kn 150 Ton 1334 kn 200 Ton 1779 kn 250 Ton 2224 kn 300 Ton 2669 kn Stroke ffective rea (cm 2 ) Oil apacity 50 LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN
20 2 1 3/8"-18NPT LN Series Safety olor and V Lock nut cylinders are equipped with a yellow safety band. o not extend the ram beyond this point as it may result in a loss of hydraulic oil and damage to the cylinder and/or load. s I Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. ollapsed ore iameter (mm Outside iameter Saddle iameter epth of ole 1 Saddle Protrusion rom 2 Lock Nut Length ase to Inlet Port I LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN LN
21 Low learance Lifting w/ Mechanical Lock Nut Single acting cylinder with mechanical safety lock nut esigned to support loads without hydraulic pressure 5 tilting saddle is standard Maximum working pressure: 10,000 psi/700 bar Load Return Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 LN Series 5 Safety olor and V Lock nut cylinders are equipped with a yellow safety band. o not extend the ram beyond this point as it may result in a loss of hydraulic oil and damage to the cylinder and/or load. Safety Instructions section to review the best methods of operation. lways be prepared. pg 102 I apacity Stroke ffective rea (cm 2 ) Oil apacity 60 Ton / 534 kn 50 LN Ton / 890 kn 50 LN Ton / 1423 kn 45 LN Ton / 1779 kn 45 LN Ton / 2224 kn 45 LN K J ollapsed ore ia. Outside ia. Outside Saddle ia. Saddle Protrusion rom Lock Nut Length ase to Inlet Port I oupler to ylet J LN TW105-4N LN TW135-4N LN TW170-4N LN TW190-4N LN TW215-4N yelet to yelet K 24
22 T Series Ideal for frame pulling machines ed plunger and base Single acting cylinders with spring return Removable threaded adapter for attaching accessories to plunger end and base Maximum working pressure: 10,000 psi / 700 bar Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s ombo Kits Most cylinders are available in easy to order kits: cylinder, gauge, couplers, hose pg and pump. 60 T Series Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 igh-low ouplers igh-low oupler: 38 is 3/8" - 18NPT L V T K S apacity 10 Ton 89 kn 20 Ton 178 kn Stroke ffective rea (cm 2 ) Oil apacity ollapsed 151 T T T Outside ia. ia. ase to Inlet Port ollar K ollar Length L Saddle S ase s T s V T UN NPSM NPSM T UN NPSM NPSM T UN NPT NPSM 25
23 P Series - igh-tonnage Pulling igh strength steel construction One piece high grade alloy bearing for side load protection and longer life Polyurethane cup seal provides optimum performance xternal plunger threads and Internal base threads Used for pulling and tensioning Maximum working pressure: 10,000 psi / 700 bar Spring extend return P Series 3/8-18NPT P P02, P05 & P10 The P02/P05/P10* is a male/female set. This clevis is designed to aid in pulling applications with all the P series cylinders. P02 70 mm 40 mm 20 mm 16 mm 35 mm R8 55 mm 32 mm 22 mm M16X mm 85 mm M30X2 M30X2 3/8"-18NPT 85 mm 55 mm 681 mm 530 mm L P05 83 mm 48 mm 20 mm P10 45 mm R8 70 mm 100 mm 160 mm 95 mm M28X mm 25 mm 40 mm 48 mm 65 mm 71 mm Z 35 mm M30x2 75 mm 30 mm apacity 2.5 Ton / 22 kn 5 Ton / 44 kn 10 Ton / 100 kn Stroke ffective rea (cm 2 ) Oil apacity ollapsed Outside ia. ore ia. Top to Inlet Port ollar Length L 127 P P P M85x2 25 dapter ase Mounting ole Length P ia. Length K Q Y epth Z Optional levis P M16 x P02 P M28 x P05 P1006* M30 x 2 M30x P10 26
24 P Series - igh-ycle ixtured pplication M L I Q P s N K 3/8"-18NPT J *Note: Precision double acting cylinders do not come with couplers. P Series Provides hydraulic power for both extend and retract esigned for high cycle production applications igh strength steel construction from gun drilled solid bar wiper seals keep dirt and contamination out levis eye attachments are available Maximum working pressure: 10,000 psi / 700 bar Related Product: oses We offer a variety of and materials. pg 67 apacity 9 Ton 80 kn 16 Ton 142 kn Push ffective rea (cm 2 ) Pull ffective rea (cm 2 ) ollapsed ore ia. P P P P Outside ia. ia. Protrusion Length ase to Inlet Port J Top to Return Port K Length L M ollar Length N Int. ase P Int. ase Length Q P P P P y attaching this clevis eye to a P cylinder, you gain the ability for pull applications. or use with the 9 or 16 ton P cylinders only. imensions /16-16N ¾ -16N /16-16N
25 Series - eneral Purpose apacity: Tons Stroke: mm Pressure: 700 R mm wiper seals out dirt and contamination igh strength steel construction from gun drilled solid bar One piece high grade alloy bearing for side load protection and long life Ideal for pushing and pulling Maximum working pressure: 10,000 psi / 700 bar ed cylinders, removable saddle, thicker cylinder walls Retract under hydraulic power for faster operation Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. cylinders can be used in pushing and pulling applications. In this photo, we see a 2506 cylinder set up for a pull application using a levis cylinder accessory 28
26 Series U Series luminum s luminum cylinders make a great lightweight alternative being up to 60% lighter than comparable steel models. pg36 s ccessories 389 mm 3008 With a variety of tonnage and sizes, you can apply our cylinders on a large variety of applications. ustom tonnages and stroke lengths are available upon request. See the assortment of accessories designed to work with our products. pg40 ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, ose pg and Pump. 60 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 apacity 10 Ton 89 kn 30 Ton 267 kn 55 Ton 489 kn 75 Ton 667 kn 100 Ton 890 kn Stroke Quick Selection uide ollapsed Oil apacity Push Pull * * * * * * * * * Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 igh-low ouplers igh-low oupler: 38 is Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over port side of the cylinder. * re equipped with carrying handles. 29
27 Series - eneral Purpose ccessories See the assortment of accessories designed to work with our products. pg40 Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, ose pg and Pump Safety Instructions section to review the best methods of operation. pg lways be prepared apacity Stroke apacity Push (ton) Pull (ton) ffective rea Push (cm 2 ) Pull (cm 2 ) Oil apacity Push Pull ollapsed ore ia. 10 Ton 89 kn 30 Ton 267 kn 55 Ton 489 kn 75 Ton 667 kn 100 Ton 890 kn * * * * * * * * * * re equipped with carrying handles. 30
28 Y K M J X Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s L Relief Valve 3/8"-18NPT ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over port side of the cylinder. Z igh-low ouplers igh-low oupler: 38 is Outside ia. ia. Saddle ia. ase to Inlet Port Top to Return Port Internal J Length K ollar L ollar Length M olt ircle X ase Mounting ole Y UN 25 2¼ -14UN /16-18UN UN 25 2¼ -14UN /16-18UN ½ -16UN / 16-12UN ½ -13UN ½ -16UN / 16-12UN ½ -13UN * UN UN ½ -13UN * UN UN ½ -13UN * UN UN ½ -13UN * UN 38 5¾ -12UN ¾ -10UN * UN 38 5¾ -12UN ¾ -10UN * ¾ -12UN ¾ -10UN * ¾ -12UN ¾ -10UN * ¾ -12UN ¾ -10UN * ¾ -12UN ¾ -10UN 25 epth Z * re equipped with carrying handles. 31
29 Series - eavy Lifting apacity: Tons Stroke: mm R mm low ontrol Valves ontrol the speed of your control valve. pg 62 Related Product: oses We offer a variety of and materials. Safety Instructions pg 67 section to review the best methods of operation. pg lways be prepared. 102 s are burnish rolled creating a smoother Industrial hard chrome plated plunger prevents scratching and corrosion ase mounting holes standard on all models wiper seals out dirt and contamination igh strength steel construction from gun drilled solid bar Maximum working pressure: 10,000 psi / 700 bar as/iesel ngine Pumps These cylinders pair up well with a as or iesel ngine pump. We gas/diesel engine pumps. ontact your local V dealer for more details. as engine pump will provide 700 R. hydraulic force at remote locations diesel engine. Ideal for applications where electricity Two speed pump designed for rapid cylinder advance as pump features a sturdy protective roll cage for use in the toughest environments Optional electric start with iesel ngine lectric Motor Pumps These cylinders pair up well with lectric Motor pumps. We offer a ontact your local V dealer for more details. Meets OS regulations for sound Two speed pump designed for rapid cylinder advance to prevent pump damage 100% uty ycle T motors ll hand pendants are wired at 24V for safety ull load starting capability 32
30 Quick Reference uide apacity 100 Ton 890 kn Stroke ollapsed Oil apacity Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s Ton 1334 kn Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to pg Ton 1779 kn Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg Ton* 2669 kn 400 Ton* 3559 kn igh-low ouplers igh-low oupler: 38 is 500 Ton* 4448 kn 600 Ton* 5338 kn Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over port side of the cylinder Ton* 7117 kn Ton* 8896 kn * vailable on request See next pages (pg.34-35) to view more detailed stats on igh Tonnage ouble cting s. 33
31 Series - eavy Lifting 3/8"-18NPT Z X Y Stroke apacity apacity (ton) ffective rea (cm 2 ) Oil apacity Push Pull Push Pull Push Pull Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over port side of the cylinder. Optional Tilt-Saddles Saddles tilt to a 5% maximum to adjust to the load. View our cylinder accessories page to pg 41 Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 igh-low ouplers igh-low oupler: 38 is 100 Ton 890 kn 150 Ton 1334 kn 200 Ton 1779 kn 300 Ton* 2669 kn 400 Ton* 3559 kn 500 Ton* 4448 kn 600 Ton* 5338 kn 800 Ton* 7117 kn 1000 Ton* 8896 kn * vailable on request: no stock item 34
32 Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s ollapsed ore ia. Outside ia. ia. Saddle ia. ase To Inlet Port Top To Retract Port ase Mounting oles olt ircle X Size epth Z M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M
33 U Series - eneral Purpose, Lightweight Lightweight aluminum alloy construction Up to 60% lighter than comparable tonnage steel cylinders onvenient carry handle against corrosion and wear Steel protective plate on cylinder base Maximum working pressure: 700 bar apacity: Tons Stroke: mm 700 R mm U2006 U3006 apacity Stroke apacity (ton) ffective rea (cm 2 ) Oil apacity Push Pull Push Pull Push Pull 20 Ton 178 kn 30 Ton 267 kn 50 U U U U U U * The base of the cylinders contain a Steel plate with mounting holes and is designed to protect the cylinder base mounting plate for lifting stability. They are NOT designed to withstand the full rating of the cylinder. 36
34 U Series Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 s Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. igh-low ouplers igh-low oupler: 38 is Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over port side of the cylinder. ollapsed ore ia. Outside ia. ia. Saddle ia. ase To Inlet Port NOT: The base of the aluminum cylinders contain a Steel plate with mounting holes and is designed to protect the base mounting plates for lifting stability. The threads are NOT designed to withstand the full rating of the cylinder. Top To Retract Port U U U U U U
35 Series apacity: Tons Stroke: mm 700 R Inches Related Product: auges Reduce the risk of overloading your product by using a gauge. variety of graduations and types to suit any need. pg65 ombo Kits Most cylinders are available in easy to order kits:, auge, ouplers, ose pg and Pump. 60 Ideal for pushing and pulling applications. ual wipers help prevent contamination ard chrome plunger prevents rust and corrosion ardened steel seat Related Product: oses We offer a variety of and materials. pg 67 Push apacity Pull Stroke Oil apacity Push Pull ollapsed enter ole I.. O.. Pressure (R) 30 Ton 267 kn 60 Ton 534 kn 100 Ton 890 kn 20Ton 178 kn 44 Ton 391 kn 71 Ton 632 kn Ton 1334 kn 82.8 Ton 737 kn
36 Y X Series Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. s I Relief Valve ll double acting cylinders are equipped with a pressure relief valve located next to the retract port. These pressure relief valves help prevent cylinder over port side of the cylinder. J K L igh-low ouplers igh-low oupler: 38 is 3/8"-18NPT Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 Z Min. ia. of enter Tube O.. I.. O.. ase to Inlet Port Top to Return Port L Internal Internal Length I ollar ia. J Length K ase Mounting ole olt ircle X Y "-16UN 24 4½"-12N "-16UN 24 4½"-12N ¾"-16UN 21 6¼"-12N ½" 13UN ¾"-16UN 21 6¼"-12N ½" 13UN ¾"-16UN 21 6¼"-12N ½" 13UN "- 16UN "- 16UN "- 16UN "- 16UN epth Z 39
37 esigned for easy carrying cylinders Provides better control when positioning cylinder asy installation L25T34 L30T40 L30T45 L55T49 or s 2504 through , 3008, 3014, 2002T, 2006T 3002T, 3006T, 3007, 3010 LN5504 through LN5512 L25T34 ase P Series Series cylinders can be used in pushing and pulling applications. In this photo, we see a 2506 cylinder set up for a pull application using a plunger clevis cylinder accessory Safety Practices ood industry practice recommends not exceeding 80% of maximum rated capacities of all our products. pplication Series imensions 05* P ase 10**, 15, 10 P P * **xcept
38 or use with Series imensions Safety Instructions section to review the best methods of operation. pg lways be prepared. 102 s rooved, Tilt, and ed S Series ST Series ST Series T Saddle Type Tilt rooved apacity or (s) imensions ST05 5 Ton / 44 kn ST10 10 Ton / 89 kn ST15 15 Ton / 133 kn ST25 25 Ton / 222 kn ST Ton kn 55, 55, 75, 75, 100, LN55 and LN ST Ton / 890 kn 100 and ST Ton / 1334 kn 150 and ST Ton / 1779 kn 200 and ST200 ST250 ST Ton kn 250 Ton 2224 kn 300 Ton 2669 kn LN150 and LN S05 5 Ton / 44 kn 05* S10 10 Ton / 89 kn 10** S15 15 Ton / 133 kn S25 25 Ton / 222 kn ed T10 10 T1006 and T , "- 8UN 45 41
BVA Limited Lifetime Warranty
1 The V dvantage V Industrial Hydraulics was launched in 2005 and is centrally located in urope in tten-leur, The Netherlands. V is one of the Shinn u urope brands besides Omega Lift, Omega Mechanix and
More informationThe BVA Advantage. Confidence Built on Quality
1 The V dvantage V Hydraulics was launched in 2003 and is centrally located in the United States in Kansas ity, Missouri. V is one of the Shinn u of merica ompanies including; Hein-Werner, Omega Lift,
More informationOpmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1
Opmaak_V_Catalog_2007.qxp 4/16/2008 12:32 PM Page 1 2008 Opmaak_V_Catalog_2007.qxp 4/14/2008 3:36 PM Page 2 Index Single cting Cylinders 3 Lock-nut Cylinders 6 Threaded Cylinders 7 Flat ody Cylinders 8
More informationRC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.
R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable
More informationHigh Pressure Industrial Hydraulic Equipment
High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile
More informationHigh Pressure Industrial Hydraulic Equipment
High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile
More informationENERPAC hydraulic cylinders are available in hundreds of different configurations. Whatever the X
uy Online at www.uynerpac.com nerpac ydraulic s & Lifting Products NRPC hydraulic cylinders are available in hundreds of different configurations. Whatever the X I W bending, holding whatever the force
More informationHydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
More informationhydraulic power clamps
ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4
More informationhydraulic power clamps
hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475
More informationA UNIT OF APPLIED POWER. Hydraulic Power. Power for all Industrial Applications. E321e
Hydraulic e UNIT OF PPLI POWR Power for all Industrial pplications Hydraulic Power for all Industrial pplications e Table of ontents Introduction The World of nerpac... 4 ylinders (Hydraulic) 6- Introduction...
More informationTABLE OF CONTENTS. power pumps. cylinders. accessories. hand pumps. INTRODUCTION pages 1-5
TLE OF ONTENTS INTRODUTION pages 1-5 power pumps Index...1 ompany Overview... 2-3 Safety Tips... 4-5 Introduction... 42-43 Proper Size & Selection... 44-45 G1 Series Electric... 46-47 G3 Series Electric...
More informationPress Section Overview
Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication
More informationPump Mounted Directional Control Valves
E327 US Table of ontents Introduction The World of Enerpac.... 2-3 ylinders (Hydraulic) 4-55 Introduction... 4-5 R-UO, Single-cting ylinders....6-9 R-UO, ylinder ccessories....10 R-, luminum ylinders Introduction...11
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationAccessory Overview UHW
ccessory Overview rom a single actuator to a multi-actuator system, a comprehensive range of accessories is available to tailor your UN-LT system to meet your project requirements. omponents and Wheels
More information- hydraulic tools & equipment -
- hydraulic tools & equipment - PUMPS YLINRS PULLRS JKS TOOLS SSORIS 1-18 let your boss do the hard work oss ydraulics was born from over 150 years of collective experience in the ustralian market. t oss
More information,4 44,5 3. Cylinder. Flat Base
SERIES Mounting accessories Series Threaded onnector Tons Part No. (mm) (mm) (in) D (mm) E (mm) 5 25748 44,5 22,4 3 / 4-14 NSPM 4,8 12,7 10 25664 41,4 36,6 1 1 / 4-11 1 / 2 NSPM 7,9 14,2 25 25654 57,2
More informationRACH, Aluminium Hollow Plunger Cylinders
RACH, Aluminium Hollow s Shown from left to right: RACH-4, RACH-, RACH-206, RACH-06 The Lightweight Solution for Tensioning and Testing s All RACH-cylinders are equipped with bolt-on hollow removable saddles
More informationOSP. General Purpose Jacks - Plain Ram, Single Acting (Type - Spring Return) Features / Application Multipurpose jacks.
OSP General Purpose Jacks - Plain Ram, Single cting (Type - Spring Return) 5-400 ton Stroke 50-00 mm ax. Working Pressure 700 bar ultipurpose jacks Gland Nut designed to withstand dead end load ase mounting
More informationEnerpac Hydraulic Tools
Enerpac Hydraulic Tools Enerpac offers an extensive range of dedicated tools for a variety of specific and flexible applications. Whatever your requirement cutting, punching, spreading or bending you can
More informationFT SERIES. FT Series Linear Actuators
T SRS OR ROR SRW TUTOR Mount virtually any servo motor ong stroke lengths available igh speed and long life Motors shown in drawings are for illustrative purposes only and are not included with T ctuators.
More informationSelection table. Manually operated pumps. Electric driven mini pumps. Air driven single stage pumps. Air driven two stage pumps
INX PUMPS Hydraulic Pumps Selection table 22 HP Range Manually operated pumps 23 HP Range General information on electric driven pumps 24 HP1 Range lectric driven mini pumps 24 HP3 Range lectric driven
More informationHigh Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
More informationHYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS
HYDRAUL Sykes-Pickavant Loadstar Plus heavy duty pullers are renowned for their durability, immense pulling power and versatile range of kit options. Sykes-Pickavant hydraulic equipment builds upon the
More informationNEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
More informationENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
More informationRC-Series DUO, Single-Acting Cylinders. The Industry Standard General Purpose Cylinder
RCSeries DUO, SingleActing s From left to right: RC, RC, RC0, RC4, RC000, RC, RC00 The Industry Standard General Purpose Saddles All RC cylinders are equipped with hardened removable grooved saddles. For
More informationDIST. AUTORIZADO. Design Features
IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer
More informationLT36607 Winslow Depth Filters. Winslow Depth Filters
LT36607 Winslow epth ilters Winslow epth ilters Winslow Lube Oil ilters...............................4-3 Introduction.................................... 4-4 Selecting a Lube Oil ilter.........................
More information4 Winslow Depth Filters
4 Winslow epth ilters Winslow Lube Oil ilters... 4-3 Introduction... 4-4 Selecting a Lube Oil ilter.... 4-5 ull-low Type 1... 4-6 y-pass Type 1............................... 4-9 ull-low Type 2... 4-12
More informationStainless Steel Reels
Stainless Steel Reels Washdown hemical Transfer Potable Water Pharmaceuticals & osmetics Steam leaning ood Processing Marine ueling ire Protection airy Operations ottling Plants ou an t uy etter Reel.
More informationPower Take-Off Clutches
IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationXT-Series & AT-Series Alternators Designed for Recreational Applications
XT-Series & AT-Series Alternators esigned for Recreational Applications 170A or 220A in a Small ase Package Up to 140A at dle Speeds Patented Smart Ready Technology (XT-Series Only) ual an ooling, igh
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationCylinder Accessories Mounting accessories for C Series cylinders
ylinder ccessories Mounting accessories for Series cylinders Extension Rod Swivel ap ylinder ase ttachment 2 These accessories, which attach directly onto cylinder top or bottom, permit additional flexibility
More informationTension Brakes/High Heat Capacity
IST. UTORIZO Tension rakes/igh eat apacity MX (55) 53 63 23 31 Steel Water ooled rakes ost effective design One piece water jacket eliminates leakage Release springs ensure complete disengagement New friction
More informationCOMMERCIAL LIFTING EQUIPMENT
COMMERCIL LIFTING EQUIPMENT GLOSSRY Winntec from SIP have some important logos to look out for throughout this new catalogue. ll products are backed up by innovative European Design, and all come with
More informationHANNAY REELS. Spray Hose Reels. The reel leader. Reels to handle hose for: Grounds Maintenance Pest Control Vehicle Maintenance Steam Cleaning
Spray ose Reels NNY RLS The reel leader. Reels to handle hose for: rounds Maintenance Pest ontrol Vehicle Maintenance Steam leaning Lawn are Service Tree Spraying eneral Maintenance griculture -9450-S
More informationHIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS
HIGH PRESSURE HYDRAULICS PUMPS CYLINDERS JACKS Since 2001, PowerX International, LLC has been collaborating with its customers to design and supply hydraulic products and systems. Specializing in mobile
More informationSYSTEM COMPONENTS. Hydraulic Hoses. Hydraulic Oil. Pressure Gauges. Manifolds. Couplers & Fittings. Control Valves. Pages 50-51
SYSEM COMONENS Hydraulic Hoses High pressure hydraulic hoses s 0 Hydraulic Oil remium grade hydraulic oil ressure Gauges ressure gauges and gauge mounting blocks 2 Manifolds istribution blocks, controlled
More informationValvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
More informationAmphenol Amphenol Pcd Terminal Junction Systems
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved
More informationThe Complete Range of Fluid Power Products
The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.
More informationVictory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationCombination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
More informationRevolutionary High Speed Technology
Revolutionary High Speed Technology Power, Precision and Reliability at 25,000-90,000 rpm to 1.60 hp +1.561.994.0500 www.airturbinetools.com info@airturbinetools.com HIGH SP SPINLS re Your Machine Spindle
More informationSINGLE ACTING TELESCOPIC
SINGLE TING TELESOPI RM is pleased to offer a full line of standard telescopic designs for your equipment. These designs are pre-engineered using in stock material and internal components for quick order
More information2192 mm (86.3 in.) or mm (116.6 in.) mm (116.6 in.)
SPIITIONS ngine 640L / 648L 748L Manufacturer / Model John eere PowerTech PSS 6.8L John eerepowertech 6.8L John eere PowerTech PSS 6.8L John eere PowerTech 6.8L Off-Road mission Standards P inal Tier 4
More informationGeneral Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationSMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationPresentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
More informationWinslow Lube Oil By-Pass Type 1 Filter Service Instructions
Vent Plug (NPT) Winslow Lube Oil y-pass Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on Page
More informationPin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
More informationADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationDRIVELINE CATALOG DRIVELINE DIVISION
RIVIN IVISION RIVIN TOG ertified Power Inc. - riveline ivision 390 Koopman ane, lkhorn, WI 53-00 Tel: 6.74.5600 ax: 6.73.785 -Mail: driveline @certifiedpower.com WG 5479- OPYRIGHT 006 RTII POWR IN. - RIVIN
More informationAdams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
More informationJACKS AND HYDRAULICS
JACKS AND HYDRAULICS Floor s & Stands 2 Ton Floor SKU 964622 HEIHW93642 Min. Height: 4-1/2 Max. Height: 20-1/4 324 3 Ton Floor SKU 964623 HEIHW93652 Min. Height: 5 Max. Height: 23-1/2 429 4 Ton Floor SKU
More informationSingle Solenoid External Pilot Normally Closed
atalog 000- Operating ressure Internal ilot Solenoid Valves 3/" & 3/" ody 0 to 0 SI (standard) -/" ody to 0 SI (00 SI option available) Series Valves ilot Supply Internal ilot Remote ilot Valve Operating
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationPOWER PUMPS. G1 Series - Electric. SUC-O-MATIC VALVE The 3 position / 3 way Suc-OMatic valve draws hydraulic oil. Power Pumps
Series - Electric Reservoir apacity... gallon Flow @ Rated Pressure... 9 cu.in./min. Electric Maximum Pressure... psi Powered by a V - 6HZ,. hp universal motor (4,64 rpm). Low startup voltage, draws amps
More informationSpecial sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) MXTA Series of Driving Type Hydraulic Torque Wrench.
Torque Wrench Torque Wrench MXTA Series of Driving Type Hydraulic Torque Wrench Special sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) Max. working pressure up to 70Mpa,
More informationHollow plunger cylinders - Gravity return 70
Hollow plunger cylinders - Gravity return 70 HHJ 30 G 5 Features & benefits Compact Usable in all positions Protected against ejection of the plunger Standard supplied with High Flow female coupler A 118
More informationN Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D
Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information
More informationMK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 35 tons of crimping force has the capability to crimp hoses up to " 2 wire and 3/4" 4 wire. UNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
More informationAudio/Video Reels. You Can t Buy A Better Reel. Family owned and operated since 1933
udio/video Reels Production and Recording acilities Television and Radio Stations Live vents and oncerts Mobile roadcast Units Satellite and able ompanies iber Optics Military Mining ommunications istributed
More informationProfessional Products. Professional Results.
Professional Products. Professional Results. PROFESSIONAL PRODUCTS. PROFESSIONAL RESULTS. Established in 1963 American Forge & Foundry has built a long standing tradition of providing quality products,
More informationPetroleum Hose Reels
Petroleum ose Reels ome uel elivery In-plant Refueling Marine Refueling Off-road Vehicle/quipment Refueling ou an t uy etter Reel. amily owned and operated since 1933 MNUL OR POWR RWIN RLS Series 6000
More informationDouble Sealed on Both Sides in one piece housing for structural rigidity
eries Right ngle elical/evel tainless teel ervofit odular ystem Features OER rives Inc. is proud to offer our quality-proven, high-efficiency eries elical/evel speed reducer in a stainless steel housing.
More informationADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
More informationSpecialty Bearing Interchange Guide
pecialty earing Interchange uide Only one name is synonymous with the finest-quality mounted tapered and spherical roller bearings, aldor odge. We are the standard against which all other bearings are
More informationUniversal cylinders. single acting with spring return 5 to 100 tonnes. Features. Applications
Universal cylinders YS Universal cylinders single acting with spring return 5 to 100 tonnes Universal cylinders are designed and manufactured to work in the toughest environments to which this type of
More informationPart No. Description Part No. Description
Hand Tool Part No. Description 804-1 Blow Mold Case 804-2 19 1/2 Extension Tube 804-3 16 1/2 Extension Tube 804-4 8 1/2 Extension Tube 804-5 5 Extension Tube 804-6 3 1/4 Extension Tube 804-7 Serrated Saddle
More informationHydraulic Cylinders and Lifting Products
Hydraulic s and Lifting Products Enerpac hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application... lifting, pushing, pulling, bending, holding...
More informationRod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
More informationIndustrial Hose Reels
Industrial ose Reels Washdown hemical Transfer Potable Water ood Processing ottling Plants Pharmaceuticals & osmetics ueling ire Protection airy Operations ou an t uy etter Reel. amily owned and operated
More informationCouplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
More informationValve Products. B Series Valve
atalog 000- arker neumatic Valve, an exceptional performing industrial valve in a compact size with an enhanced flow range. vailable in solenoid pilot operated and remote air pilot models. he series features
More informationWorm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
More informationHydraulic Jacks Hydraulic Tools
Hydraulic Jacks Hydraulic Tools Catalogue 12 Yale Industrial Products t a glance 2 Content Hydraulic Cylinders, single-acting Universal cylinders YS 6 Low profile cylinders YLS 8 Flat cylinders YFS 8 Hollow
More informationShop Press. Maximum Capacity: 25 Tons and 55 Tons SAFETY PRECAUTIONS
Operating Instructions for: Form No. 102481 1826 1845 1846A 1847 1872 1872-220v 211200 576780 60361 61275 D01008AA D01009AA WARNING: To prevent personal injury; Shop Press Maximum Capacity: 25 Tons and
More informationHD-Series. Shop Equipment
HD-Series Shop Equipment Reaching new heights Winntec (Est. 2002) is a manufacturer, esteemed developer and international supplier of high quality, efficient and reliable automotive workshop essentials,
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More informationHand Crank & Brake Assembly. 12V 1 /3 hp Motor. See Page 128 for Reel Dimensions & Sizes. (lengths over 100' are spliced)
ooster The kron rass ooster Reel is designed to be light weight and extremely durable. There are more options than ever as these reels are available in multiple sizes, and in both electric and manual rewind.
More informationAudio/Video Reels. You Can t Buy A Better Reel. Family owned and operated since 1933
udio/video Reels Production and Recording acilities Television and Radio Stations Live vents and oncerts Mobile roadcast Units Satellite and able ompanies iber Optics Military Mining ommunications You
More informationGas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
More informationHydraulic. Quick Couplings
Hydraulic Quick ouplings -1 Introduction ouble Shut-Off and Straight-Thru ouplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog
More informationExcellent for bending, bonding or straightening. Press bed of 50 Ton press moved by winch. Double speed pumps for fast ram moving without load.
Excellent for bending, bonding or straightening Press bed of 50 Ton press moved by winch. Double speed pumps for fast ram moving without load. Gauge indicates metric Tons. Grid guard 61304 61504 Handwinch
More informationConduit System. Conduit System. Introduction
Nickel Plated rass Nylon Strain Relief ccessories dapter,reducer,nlarger Introduction lectrical provides protection to enclosed single or multi-conductors from impact, moisture, and chemical vapors. Varying
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationAccepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
More informationAPCO CVS-6000/6000A SWING CHECK VALVES
ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,
More informationWinslow Lube Oil Full-Flow Type 1 Filter Service Instructions
Vent Plug (NPT) Winslow Lube Oil ull-low Type 1 ilter Service Instructions Parts List Part escription Part over ssembly and lamp Housing rain Plug ilter lement omponent Kit See Ordering Information on
More information