Parallel Grippers- Triple Wedge Centering Series
|
|
- Laureen Goodwin
- 6 years ago
- Views:
Transcription
1 RP SERIES 1.1 Parallel Grippers- riple Wedge entering Series achine loading hree jaws make this gripper ideal for machine loading and unloading. Sealed design repels chips and other particulate from the internal drive mechanism. Optional spring loaded stripper plate pre-loads part to facilitate insertion/finger release. Round part handling Very high gripping force coupled with three jaw centering makes this gripper perfect for handling or chucking large round parts by internal or external diameter. ounting Information: Grippers can be mounted & operated in any orientation ody mounts with screws from behind and slip fit dowel pin holes for locational accuracy G ody also mounts with screws through counter bores in the body and slip fit dowel pins echnical Specifications: Pneumatic Specifications Imperial etric Pressure Operating Range 2-1 psi bar ylinder ype Double cting Dynamic Seals Internally ubricated una-n Valve Required 4-way, 2-position ir Quality Requirements ir Filtration 4 icron or etter ir ubrication Not Necessary* ir Humidity ow oisture ontent (dry) emperature Operating Range una-n Seals (standard) -3 ~18 F -35 ~8 Viton Seals (optional) -2 ~3 F -3 ~15 aintenance Specifications Expected ife Normal pplication 5 million cycles w/ Preventative aintenance 1+ million cycles* Field Repairable es Seal Repair Kits vailable es *ddition of lubrication will greatly increase service life aintenance Section Fingers mount on ends of jaws with screws and locate by keying or with dowel pins Fingers mount on bottom of jaws with screws and dowel pins. Unit has top manifold ports For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
2 Optional Spring oad Stripper Plate Ground and squared music wire spring Sensors Reads position of jaw (sold separately-see How to Order Section for more info) Self ubricating Seals Self lubricating dynamic seals (una-n only) Optional Stripper Plate riple Wedge Product Features Hard oat nodize he body has hard-coat anodize 6 R with eflon impregnation ccessory ounting Grooves Operating Principle Quality omponents One piece aircraft quality aluminum body. Jaw components are precision ground for minimal jaw play and hardened for wear resistance and long life Dowel Holes Slip fit dowel pin holes in body and jaws Sealed Design Sealed design repels contaminants ottom Plate Style-RP Parallel Gripper Size -315 Style: RP-315 RP-315 Stroke:.3 in. 7.6 mm Grip Force: 1 lbs. 445 N Weight:.5 lbs..24 Kg Page 1.11 Style-RP Parallel Gripper Size -32 Style: RP-32 RP-32 Stroke:.4 in. 1.2 mm Grip Force: 3 lbs N Weight: 1. lbs..45 Kg Page Style-RP Parallel Gripper Size -331 Style: RP-331 RP-331 Stroke:.62 in mm Grip Force: 75 lbs N Weight: 3. lbs Kg Page Style-RP Parallel Gripper Size -344 Style: RP-344 RP-344 Stroke:.88 in mm Grip Force: 9 lbs. 43 N Weight: 6. lbs Kg RP SERIES 1.11 Jaws Page ody Piston ap Style-RP Parallel Gripper Size -356 Style: RP-356 RP-356 Stroke: 1.12 in mm Grip Force: 1425 lbs N Weight: 9.75 lbs Kg Exhaust Pressure to open Pressure to close Exhaust double acting piston is connected by a shaft to a triple sided wedge. he wedge slides in a slot located in each of the jaws converting vertical motion of the wedge into horizontal synchronous motion of the jaws. he large surface area of the wedge minimizes frictional wear. his gripper is suitable for internal or external gripping. U.S. Patent # 5,125,78 Designed and manufactured in the US Page Style-RP Parallel Gripper Size -368 Style: RP-368 RP-368 Stroke: 1.38 in mm Grip Force: 3 lbs N Weight: 16. lbs Kg Page For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
3 RP SERIES 1.12 PRE GRIPPER RP-315 RIPE WEDGE SERIES 3 2. [5.8] [44.45] SENSOR OUNING SOS 2 Ø.125 SF.25 DP [Ø 3 H7 6 DP] DP [3 3 DP]. IR PORS ON Ø Specifications RP-315 RP-315 otal Rated Grip Force 1 psi, 7 bar 1 lbs. 445 N Stroke....3 in. 7.6 mm Weight lbs..24 Kg Pressure Range psi bar ylinder ore Ø in mm Displacement in cm 3 Standard Seals ~18 F -35 ~8 Viton Seals ~3 F -3 ~15 ctuation sec..12 sec. ccuracy... ±.2 in. ±.5 mm Repeatability... ±.1 in. ±.3 mm 3 # DP [5 19 DP] EQ SPED ON Ø 1.75 [Ø 44.45].. JWS SHOWN OSED 3 Ø.3.58 DP ORE &.88 ERNE ENGH FOR #8 SHS [Ø ORE & 22 ERNE ENGH FOR 4 SHS] OSE.8 [2].6 [2] [37.] 2 #1-32 [5] IR PORS (OPEN).125 [3.2].24 [6].13 [3] SRIPPER PE.45 [11].312 [7.92] [8.].125 [3.2].375 [9.5].417 [1.6].46 [1.3] 1.21 [31] (OPEN) 1.6 [27] (OSED) 6 # DP [4 6 DP] 3 Ø.125 SF.25 DP [Ø 3 H7 6 DP] 6 Ø.938 SF.25 DP [Ø 3 H7 6 DP].4595 [11.67] 6 # DP [4 6 DP] VIEW.35 [8.89].125 [3.2].188 [4.8].5595 [14.21] VIEW JWS SHOWN OPEN UNESS OHERWISE NOED OERNES RE S SHOWN EOW Imperial in. etric [mm] Dimensions are hird ngle ll Dowel Holes are SF (Slip Fit). etric hreads. = ±.1 [.] = [±.25] ocational olerance ourse Pitch. = ±.5 [.] = [±.13] ±.5" or [±.13mm]. = ±.5 [.] = [±.13] oading Information FINGER FORE - F/ GRIP FORE PER FINGER WRNING! DO NO EEED IU EFFEIVE FINGER ENGHS 1 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] EFFEIVE FINGER ENGH - 2 in. 5mm oading apacity Static Dynamic Imperial etric Imperial etric aximum ensile 3 lbs N 1 lbs. 445 N aximum ompressive 3 lbs N 1 lbs. 445 N aximum oment x 25 in.-lbs. 28 Nm 75 in.-lbs. 8 Nm aximum oment y 25 in.-lbs. 28 Nm 75 in.-lbs. 8 Nm aximum oment z 15 in.-lbs. 17 Nm 5 in.-lbs. 6 Nm apacities are per set of jaws and are not simultaneous SI ODE RP-315 -SP - V ERI SRIPPER PE VION SES SENSOR ESSORIES ORDER # Q/UNI NPN Hall Effect Sensor* OHSN-8 1 or 2 PNP Hall Effect Sensor * OHSP-8 1 or 2 Quick Disconnect 2 eter able ength* -1 1 or 2 Quick Disconnect 5 eter able ength* or 2 PNEUI ESSORIES Fail Safe Valve OFSV-1 1 Standard Seal Repair Kit SK Viton Seal Repair Kit SK-122V 1 H EFFE SENSORS FISFE VVE WIH 9 QUIK DIS. E.63 [16] 2.92 [74] IN. For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
4 Ø2.75 [Ø69.9] [6.33] 3 JWS SHOWN OSED 3 1/4-2.63DP [6 16DP] EQ SPED ON Ø2.438 [Ø61.9].. 2 Ø.1875SF.38DP [Ø5H7 9DP] SENSOR NG SOS 2 #5-4.25DP [3 6DP]. IR PORS ON Ø2.39 [Ø6.8].. PRE GRIPPER RP-32 RIPE WEDGE SERIES Specifications RP-32 RP-32 otal Rated Grip Force 1 psi, 7 bar 3 lbs N Stroke....4 in. 1.2 mm Weight lbs..45 Kg Pressure Range psi bar ylinder ore Ø in. 5.8 mm Displacement in cm 3 Standard Seals ~18 F -35 ~8 Viton Seals ~3 F -3 ~15 ctuation sec..18 sec. ccuracy... ±.2 in. ±.5 mm Repeatability... ±.1 in. ±.3 mm 3 Ø.34.69DP 'ORE & 1. ERNE ENGH FOR #1 SHS [Ø 'ORE & 25 ERNE ENGH FOR 5 SHS] RP SERIES [46.] OSE.71 [18] 2 #1-32 [5] IR PORS (OPEN).25 [6].5 [13].9 [2].9 [2] SRIPPER PE.563 [14.3].5 [12.7].188 [4.8] 3.44 [11.2] VIEW JWS SHOWN OPEN.437 [11.1] 6 # DP [4 9DP] 3 Ø.1875SF.38DP [Ø4H7 9DP] 1.61 [41](OPEN) 1.41 [36](OSED).4374 [11.11].125 [3.2].6245 [15.86].7185 [18.25] VIEW 6 Ø.125SF.38DP [Ø3H7 9DP].25 [6.4] 6 # DP [4 9DP] oading Information UNESS OHERWISE NOED OERNES RE S SHOWN EOW Imperial in. etric [mm] Dimensions are hird ngle ll Dowel Holes are SF (Slip Fit). etric hreads. = ±.1 [.] = [±.25] ocational olerance ourse Pitch. = ±.5 [.] = [±.13] ±.5" or [±.13mm]. = ±.5 [.] = [±.13] FINGER FORE - F/ GRIP FORE PER FINGER WRNING! DO NO EEED IU EFFEIVE FINGER ENGHS 1 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] in mm EFFEIVE FINGER ENGH - oading apacity Static Dynamic Imperial etric Imperial etric aximum ensile 75 lbs N 25 lbs N aximum ompressive 75 lbs N 25 lbs N aximum oment x 75 in.-lbs. 85 Nm 255 in.-lbs. 28 Nm aximum oment y 75 in.-lbs. 85 Nm 25 in.-lbs. 28 Nm aximum oment z 35 in.-lbs. 4 Nm 1 in.-lbs. 11 Nm apacities are per set of jaws and are not simultaneous SI ODE RP-32 -SP- V ERI H EFFE SENSORS WIH 9 QUIK DIS. E SRIPPER PE VION SES SENSOR ESSORIES ORDER # Q/UNI NPN Hall Effect Sensor* OHSN-8 1 or 2 PNP Hall Effect Sensor * OHSP-8 1 or 2 Quick Disconnect 2 eter able ength* -1 1 or 2 Quick Disconnect 5 eter able ength* or 2 PNEUI ESSORIES Fail Safe Valve OFSV-1 1 Standard Seal Repair Kit SK-7 1 Viton Seal Repair Kit SK-7V 1 FISFE VVE.63 [16] 3.3 [84] IN. For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
5 RP SERIES 1.14 PRE GRIPPER RP-331 RIPE WEDGE SERIES Ø 3.75 [Ø 95.3] 3.25 [82.55] 1. [25.4] 3 5/ DP [8 16 DP] EQ SPED ON Ø 3.25 [Ø61.9].. 2 Ø.25 SF.5 DP [Ø 6H7 13 DP] SENSOR NG SOS 2 #5-4.18DP [3 4 DP]. IR PORS ON [79.93].. Specifications RP-331 RP-331 otal Rated Grip Force 1 psi, 7 bar 75 lbs N Stroke in mm Weight lbs. 1.4 Kg Pressure Range psi bar ylinder ore Ø in mm Displacement in cm 3 Standard Seals ~18 F -35 ~8 Viton Seals ~3 F -3 ~15 ctuation sec..23 sec. ccuracy... ±.2 in. ±.5 mm Repeatability... ±.1 in. ±.3 mm JWS SHOWN OSED OSE 1. [25] 2 #1-32 [5] IR PORS (OPEN).3 [8] 3 Ø DP ORE & 1.31 ERNE ENGH FOR 1/4 SHS [Ø DP ORE & 33 ERNE ENGH FOR 6 SHS] 6 # DP [5 1 DP] [65.1] SRIPPER PE.84 [21].764 [19.4].74 [17.9].75 [19.1].187 [4.8] [16.2].562 [14.3] 2.31[59] (OPEN) 2.[51] (OSED) 3 Ø.1875 SF.32 DP [Ø 5 H7 8 DP] 12 # DP [5 1 DP].875 [22.23] VIEW.438 [11.1].219 [5.6].438 [11.1].875 [22.23] VIEW JWS SHOWN OPEN UNESS OHERWISE NOED OERNES RE S SHOWN EOW Imperial in. etric [mm] Dimensions are hird ngle ll Dowel Holes are SF (Slip Fit). etric hreads. = ±.1 [.] = [±.25] ocational olerance ourse Pitch. = ±.5 [.] = [±.13] ±.5" or [±.13mm]. = ±.5 [.] = [±.13] oading Information FINGER FORE - F/ GRIP FORE PER FINGER WRNING! DO NO EEED IU EFFEIVE FINGER ENGHS 1 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] EFFEIVE FINGER ENGH - 3 in. 76mm oading apacity Static Dynamic Imperial etric Imperial etric aximum ensile 125 lbs. 556 N 4 lbs N aximum ompressive 125 lbs. 556 N 4 lbs N aximum oment x 125 in.-lbs. 141 Nm 4 in.-lbs. 45 Nm aximum oment y 125 in.-lbs. 141 Nm 4 in.-lbs. 45 Nm aximum oment z 1 in.-lbs. 113 Nm 3 in.-lbs. 34 Nm apacities are per set of jaws and are not simultaneous SI ODE RP SP ERI H EFFE SENSORS WIH 9 QUIK DIS. E SRIPPER PE V VION SES SENSOR ESSORIES ORDER # Q/UNI NPN Hall Effect Sensor* OHSN-8 1 or 2 PNP Hall Effect Sensor * OHSP-8 1 or 2 Quick Disconnect 2 eter able ength* -1 1 or 2 Quick Disconnect 5 eter able ength* or 2 PNEUI ESSORIES Fail Safe Valve OFSV-1 1 Standard Seal Repair Kit SK Viton Seal Repair Kit SK-113V 1 FISFE VVE 4.26 [18] IN..63 [16] For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
6 1.871 Ø4.47 [Ø113.5] 4. [11.6] 3 Ø.25SF.5DP [Ø6H7 12DP] 3 5/ DP [8 19DP] EQ SPED ON Ø4. [Ø11.6].. SENSOR NG SOS PRE GRIPPER RP-344 RIPE WEDGE SERIES Specifications RP-344 RP-344 otal Rated Grip Force 1 psi, 7 bar 9 lbs. 43 N Stroke in mm Weight lbs. 2.7 Kg Pressure Range psi bar ylinder ore Ø in mm Displacement in cm 3 Standard Seals ~18 F -35 ~8 Viton Seals ~3 F -3 ~15 ctuation sec..47 sec. ccuracy... ±.2 in. ±.5 mm Repeatability... ±.1 in. ±.3 mm RP SERIES JWS SHOWN OSED 2 #5-4.18DP [3 4DP]. IR PORS ON Ø3.88 [Ø98.4].. 3 Ø DP 'ORE & 1.5 ERNE ENGH FOR 1/4 SHS [Ø14 32DP 'ORE & 38 ERNE ENGH FOR 6 SHS] 6 1/4-28.5DP [6 12DP] 3. [76.2] OSE 1.16 [29] 2 1/8 NP [G1/8"] IR PORS (OPEN).35 [9].95 [24].937 [23.8] 3 Ø.25SF.5DP [Ø6H7 12DP] 6 Ø.1875SF.38DP [Ø6H7 9DP] 2.76 [7](OPEN) 2.32 [59](OSED).6874 [17.46].188 [4.8].25 [6].812 [2.6].875 [22.23].374 [9.5].13 [3].13 [3] SRIPPER PE.219 [5.6].625 [15.9] [19.2] VIEW JWS SHOWN OPEN 6 1/4-28.5DP [6 12DP] [28.58] VIEW oading Information UNESS OHERWISE NOED OERNES RE S SHOWN EOW Imperial in. etric [mm] Dimensions are hird ngle ll Dowel Holes are SF (Slip Fit). etric hreads. = ±.1 [.] = [±.25] ocational olerance ourse Pitch. = ±.5 [.] = [±.13] ±.5" or [±.13mm]. = ±.5 [.] = [±.13] FINGER FORE - F/ GRIP FORE PER FINGER WRNING! DO NO EEED IU EFFEIVE FINGER ENGHS 1 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] EFFEIVE FINGER ENGH in. 89mm oading apacity Static Dynamic Imperial etric Imperial etric aximum ensile 2 lbs N 75 lbs N aximum ompressive 2 lbs N 75 lbs N aximum oment x 2 in.-lbs. 226 Nm 75 in.-lbs. 85 Nm aximum oment y 2 in.-lbs. 226 Nm 75 in.-lbs. 85 Nm aximum oment z 15 in.-lbs. 17 Nm 5 in.-lbs. 57 Nm apacities are per set of jaws and are not simultaneous SI ODE RP-344 -SP-V ERI H EFFE SENSORS WIH QUIK DISONNE SRIPPER PE VION SES SENSOR ESSORIES ORDER # Q/UNI NPN Hall Effect Sensor* OHSN-8 1 or 2 PNP Hall Effect Sensor* OHSP-8 1 or 2 Quick Disconnect 2 eter able ength* -1 1 or 2 Quick Disconnect 5 eter able ength* or 2 PNEUI ESSORIES Fail Safe Valve OFSV-2 1 Standard Seal Repair Kit SK-8 1 Viton Seal Repair Kit SK-8V 1 FISFE VVE.88 [22] 4.8 [122] IN. For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
7 RP SERIES 1.16 PRE GRIPPER RP-356 RIPE WEDGE SERIES Ø 5.75 [Ø 146.] 5.25 [133.35] 3 3/ DP [1 16 DP] ON Ø 5.25 [Ø ].. 2 Ø.25 SF.5 DP [Ø 6 H7 13 DP] SENSOR NG SOS Specifications RP-356 RP-356 otal Rated Grip Force 1 psi, 7 bar 1425 lbs N Stroke in mm Weight lbs. 4.4 Kg Pressure Range psi bar ylinder ore Ø in mm Displacement in cm 3 Standard Seals ~18 F -35 ~8 Viton Seals ~3 F -3 ~15 ctuation....5 sec..5 sec. ccuracy... ±.2 in. ±.5 mm Repeatability... ±.1 in. ±.3 mm [28.6] JWS SHOWN OSED 2 # DP [5 7 DP]. IR PORS ON [125.52].. OSE 1.13 [29] 2 1/8 NP [G1/8] IR PORS (OPEN).35 [9] 3 Ø DP & 1.62 ERNE ENGH FOR 5/16 SHS [Ø DP & 41 ERNE FOR 8 SHS] [92.1].13 [3].25 [6] SRIPPER PE 1.17 [3].25 [6] [36.5] 1.25 [31.8].938 [23.8] 3.62[92] (OPEN) 3.6[78] (OSED) 6 5/ DP [8 13 DP] 3 Ø.25 SF.32 DP [Ø 6 H7 8 DP] 1.25 [31.75] VIEW.625 [15.88].313 [7.9].625 [15.9] 1.25 [31.75].281 [7.1] [22.5] VIEW.75 [19.] 12 5/ DP [8 13 DP] JWS SHOWN OPEN UNESS OHERWISE NOED OERNES RE S SHOWN EOW Imperial in. etric [mm] Dimensions are hird ngle ll Dowel Holes are SF (Slip Fit). etric hreads. = ±.1 [.] = [±.25] ocational olerance ourse Pitch. = ±.5 [.] = [±.13] ±.5" or [±.13mm]. = ±.5 [.] = [±.13] oading Information FINGER FORE - F/ GRIP FORE PER FINGER 1 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] EFFEIVE FINGER ENGH - WRNING! DO NO EEED IU EFFEIVE FINGER ENGHS 6 in. 152mm oading apacity Static Dynamic Imperial etric Imperial etric aximum ensile 2 lbs N 75 lbs N aximum ompressive 2 lbs N 75 lbs N aximum oment x 2 in.-lbs. 226 Nm 75 in.-lbs. 85 Nm aximum oment y 2 in.-lbs. 226 Nm 75 in.-lbs. 85 Nm aximum oment z 15 in.-lbs. 17 Nm 5 in.-lbs. 57 Nm apacities are per set of jaws and are not simultaneous How to Order: (Order Separately ) SI ODE RP-356 -SP-V ERI H EFFE SENSORS WIH QUIK DISONNE SRIPPER PE VION SES SENSOR ESSORIES ORDER # Q/UNI NPN Hall Effect Sensor * OHSN-8 1 or 2 PNP Hall Effect Sensor * OHSP-8 1 or 2 Quick Disconnect 2 eter able ength* -1 1 or 2 Quick Disconnect 5 eter able ength* or 2 PNEUI ESSORIES Fail Safe Valve OFSV-2 1 Standard Seal Repair Kit SK Viton Seal Repair Kit SK-117V 1 FISFE VVE.88 [22] 5.44 [138] IN. For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
8 Ø6.45 [Ø163.8] [15.2] 3 7/ DP [1 25DP] EQ SPED ON Ø5.96 [Ø15.].. 2 Ø.3125SF.5DP [Ø8H7 12DP] SENSOR NG SOS PRE GRIPPER RP-368 RIPE WEDGE SERIES Specifications RP-368 RP-368 otal Rated Grip Force 1 psi, 7 bar 3 lbs N Stroke in mm Weight lbs. 7.3 Kg Pressure Range psi bar ylinder ore Ø in mm Displacement in cm 3 Standard Seals ~18 F -35 ~8 Viton Seals ~3 F -3 ~15 ctuation sec..74 sec. ccuracy... ±.2 in. ±.5 mm Repeatability... ±.1 in. ±.3 mm RP SERIES 1.17 OSE 3 JWS SHOWN OSED 1.68 [43] 2 # DP [5 6DP]. IR PORS ON Ø5.436 [Ø142.9].. 2 1/4 NP [G1/4"] IR PORS(OPEN).45 [11] 3 Ø DP 'ORE & 2.19 ERNE ENGH FOR 5/16 SHS [Ø15 44DP 'ORE & 56 ERNE ENGH FOR 12 SHS] 3 Ø.3125SF.5DP [Ø8H7 12DP] 6 5/ DP [8 19DP] 4.25 [18.] SRIPPER PE oading Information 1.5 [38].31 [8] 4.7 [13](OPEN) 3.38 [86](OSED) 1.25 [31.8].375 [9.5] 1.1 [25.7] VIEW JWS SHOWN OPEN 1. [25.4] [34.9] 6 Ø.25SF.5DP [Ø8H7 12DP] 6 5/ DP [8 19DP] 1.25 [31.75] 1.5 [38.1] VIEW.875 [22.23].312 [7.9].5 [12.7] UNESS OHERWISE NOED OERNES RE S SHOWN EOW Imperial in. etric [mm] Dimensions are hird ngle ll Dowel Holes are SF (Slip Fit). etric hreads. = ±.1 [.] = [±.25] ocational olerance ourse Pitch. = ±.5 [.] = [±.13] ±.5" or [±.13mm]. = ±.5 [.] = [±.13] FINGER FORE - F/ GRIP FORE PER FINGER 1 PSI [7 bar] 8 PSI [5.5 bar] 6 PSI [4.1 bar] 4 PSI [2.7 bar] 2 PSI [1.4 bar] EFFEIVE FINGER ENGH - WRNING! DO NO EEED IU EFFEIVE FINGER ENGHS in. 178mm oading apacity Static Dynamic Imperial etric Imperial etric aximum ensile 5 lbs N 15 lbs N aximum ompressive 5 lbs N 15 lbs N aximum oment x 7 in.-lbs. 791 Nm 15 in.-lbs. 17 Nm aximum oment y 7 in.-lbs. 791 Nm 15 in.-lbs. 17 Nm aximum oment z 5 in.-lbs. 565 Nm 1 in.-lbs. 113 Nm apacities are per set of jaws and are not simultaneous SI ODE RP-368 -SP-V ERI H EFFE SENSORS WIH QUIK DISONNE SRIPPER PE VION SES SENSOR ESSORIES ORDER # Q/UNI NPN Hall Effect Sensor* OHSN-8 1 or 2 PNP Hall Effect Sensor * OHSP-8 1 or 2 Quick Disconnect 2 eter able ength* -1 1 or 2 Quick Disconnect 5 eter able ength* or 2 PNEUI ESSORIES Fail Safe Valve OFSV-2 1 Standard Seal Repair Kit SK-9 1 Viton Seal Repair Kit SK-9V 1 FISFE VVE.88 [22] 5.79 [147] IN. For more information call us at: 1-8-ROOHND or Fax: Visit us on the Internet at:
RPC Description. Metric
RP Series 3-Jaw Parallel Grippers Features and enefits How o Order Features: Self-centering gripper with very high grip force Optional stripper pate for part insertion/ejection Spring assist option maintains
More informationDouble Acting Spring Assist
1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied
More informationRPL Series. Hard Coat Anodize The body has hard-coat anodize 60 RC with PTFE impregnation. One Piece Body One piece lightweight aluminum body
Parallel PNEUAI GRIPPERS PREISION OW PROFIE SERIES ONG FINGER APPIAIONS RP Series D-8-E--44 visit OEGA Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationPARALLEL PNEUMATIC GRIPPERS
PARAE PNEUAI GRIPPERS PREISION OW PROFIE SERIES RP Series Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning lass 1 lean Room Rated with orrosion
More informationSize 50P 100P 25P 35P 40P 43P. Description. Seals. Viton High Temperature - - Description. Metric. Metric
RP-P Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Precision gripper with excellent part position repeatability Rack and pinion design for precise jaw synchronization
More information2-Jaw General Industrial Parallel Grippers Features and Benefits How To Order. Size Stroke - - -
RP Series 2-Jaw General Industrial Parallel Grippers Features and Benefits How o Order Features: Widely used robust sealed design gripper Double wedge design for high impact applications Hardened steel
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationRPW-500M-2 RPW-500M-1 RPW-375M-2 RPW-375M-1. No stroke option for size 250 & 750
RPW Series 2-Jaw Heavy-Duty Parallel Grippers Features and Benefits How o Order Features: Robust wide body gripper Grip force ranges from 222N thru 291N Strokes range from 19mm thru 114mm Rack and pinion
More informationPrecision Mini Power Slides-Built-in Cylinder
Precision ini Power Slides-Built-in ylinder PS SERIES 4.126 Precision applications: Preloaded Dual- roller bearings eliminate side play for excellent part position repeatability. inear accuracy is within.0001"
More informationGC-45. Description. Seals. Viton High Temperature
DG/G Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Rugged, high precision long stroke gripper High impact resistant with double wedge design Versatile mounting on
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
1.252 3P Parallel Gripper- 3-Jaw Precision Series Precision Gripper he 3 concentric jaws and very good repeatability [.2mm] allows loading and unloading accurate cylindrical parts. Harsh Environments Shielded
More informationRA (cam driven) Series
RA (cam driven) Series Angular Grippers Features and Benefits How o Order Features: Highly reliable rugged general purpose gripper High grip force to size ratio due to cam driven design Fingers can be
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationRPM/RPMC Series DPE/RPE
1.2 2-Jaw Product Overview PARAE GRIPPERS DPE/RPE Electric Gripper lean room class 1, class 1 with scavenge ost comparable to pneumatic systems Eliminates need for pneumatics Utilizes 24VD signal No programming
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationAngular Grippers 2.1 ANGULAR GRIPPERS
ngular Grippers NGULR GRIPPERS 2.1 ngular Motion Gripper Product Overview NGULR GRIPPERS 2.2 RU Series ngular Gripper 2-Jaw ngular Gripper Spring ssist Pneumatic or Hydraulic Operation Preferred Market:
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationESCAPEMENT DEVICES DURA-SCAPE BC SERIES STANDARD LINE 2-1.1
DURASCAPE BC SERIES STANDARD LINE Full range of sizes and strokes Hard Stops Robust design Few moving parts Extremely Durable Fully field serviceable Sensors Available See Page 21.2 FOR ORE INFORATION
More informationDURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES
CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the
More informationRobotic End Effectors
Robotic End Effectors QC Robot Tool Changer Heady duty, spring loaded locking mechanism prevents separation in the event of loss of air pressure Support for optional pneumatic, fluid or electrical interface
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationActuator Products. Actuator Products Air Cylinders Section B. Actuator Products. Catalog PDN1000-3US Parker Pneumatic
atalog PDN1-3US Air ylinders Section 1 Pictorial Index atalog PDN1-3US Tie Rod ylinders 3MA Series - Economy NFPA ylinder 6 ore sizes 1-1/2 through 5 inch 18 standard mounting styles Pressures up to PSIG
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature
series PRE GRIPPER (2-inger) Order example HD 2R MODE TUE I.D. 8 12 16 2 PIPING TYPE lank: xial piping R: Side piping eatures ow profile design saves space and reduces bending moments, improved accuracy
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationDURA-SLIDE MM-SERIES JJ-SERIES. Air Shuttles. MM-Series - 2 Position Shuttle. JJ-Series - 3 Position Shuttle 2 POSITION SHUTTLING DEVICE
DUR-SLIDE ir Shuttles MM-SERIES 2 POSITION SHUTTLING DEVIE JJ-SERIES 3 POSITION SHUTTLING DEVIE DUR-SLIDE MM and JJ Series of ir Shuttles are another R&I development made to answer the automation industry
More informationLINEAR THRUSTER SLIDES
LINEAR THRUSTER SLIS PNEUMATIC INTERNALLY POWERED DIRECTCONNECT TM MODULAR SERIES L-Series long body thruster, shown smaller than actual size. E-Series short body thruster, shown smaller than actual size.
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationDURA-SLIDE AIR-SERIES. Air-Powered Slides AIR-10 AIR-20 AIR-30 AIR-40
AIRSERIES AIR Series of Pneumatic Linear Positioning Devices provide a practical, lowcost approach to automatic work positioning. The builtin air cylinder simplifies slide operation and eliminates the
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationPort Rc(PT), G, NPT M5 M5 1/8" 1/8" 1/8" Stroke mm 2 ~ 6 2 ~ 8 2 ~ 10 2 ~ 13 2 ~ 16. Air Consumption cc/cycle
2GN Parallel gripper with 2 jaws Features Wedge type, 2-Jaw parallel gripper Improved stability with longer gripping point between jaw & plunger Improved function, sti ness and outer look Made with flexible
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationEscapements. AGE Series
GE Series Escapements merican Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 Fax: 203-452-5943 info@gi-utomation.com www.gi-utomation.com 1 GE-1 Feed Escapement uilt-in ir Cylinder
More informationProduct Information / Order Code
Product Information / Order ode Order odes eries and Type low onitoring ystem G - 0.04 - - 1 - V - X G Version 0,002... 2 l/min / 0.0005... 0.53 U GP 0.02 0,004... 4 l/min / 0.0011... 1.06 U GP 0.04 0,01...
More informationGRIPPERS GRIPPERS 178
178 ol-o-matic s line of hardworking grippers are price competitive units, available in both angular and parallel styles and come in a range of six bore sizes (3/8", 5/8", 1", 1-1/2", 2" and 3") for a
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationL & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
More informationCrossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationSquare 1 Air Cylinders
Square 1 ir Cylinders General Standard Ratings and Sizing Guide.... Page Construction Details....,. How a Square 1 is built Standard Specifications....5 odel Number Codes....6 Option ist....6 How to Order....6
More informationSeamless Integration of PHD Grippers to Universal Robots
Seamless Integration of PH Grippers to Universal Robots PNEUON02 ENEFITS n Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots n Incorporated M valves n ouples
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationCombination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Rod Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More information400 Series Profile Rail Linear Guides
400 Series Profile inear uides Transport grade ball profile rail system www.thomsonlinear.com EECTROMTE Features and enefits The 400 Series Profile inear uide is the newest addition to the Thomson inear
More informationIsys Micro Series. Air Control Valves. Section E
Series ir ontrol Valves Section www.parker.com/pneu/micro X asic Valve unctions... asic Valve eatures... Product Overview... v harts...5 Plug-in Valve Part Numbers...6 Plug-in anifolds...7 Plug-in nd Plate
More informationWORKHOLDING. Collet Blocks TURNING MILLING GRINDING WORKHOLDING ROTARY.
WORKHOLDING ollet Blocks TURNING MILLING GRINDING WORKHOLDING ROTRY www.hardinge.com Part Setup Reduction Hardinge has several options for holding single or multiple parts on your machine table, in trunnions
More informationATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
Linear Stages TS100 Series TS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Includes
More informationWedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel
Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationImproved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationCATALOG GC Global Series Air Cylinders
CTO C-15 06 lobal Series ir Cylinders lobal Series Cylinders Providing Unmatched NO OO T YOU ET Page Here is FCO-I's Expanded ine of Space Saving ir Cylinders Innovation For 0 years our famous Pancakes
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationHydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
More informationENERPAC hydraulic valves are available in a wide variety of models and configurations.
irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationProduct Information. Gripper for small components RH 9010
Product Information RH 9010 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationLight. Fast. Flexible. SGW Small Components Gripper
SGW Light. Fast. Flexible. SGW Small Components Gripper Small, simple pressurised plastic angular gripper with spring return Field of Application Universal application in clean and slightly dirty environments,
More informationSeries MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
More informationAGE-XY. Application example. Compensation XY Compensation Units Light Loads. Workpiece weight 4 kg.. 10 kg. Sizes 050..
AGE-XY Sizes 050.. 080 Workpiece weight 4 kg.. 10 kg Compensation paths XY ± 2.5 mm.. ± 4 mm Rotation ± 12.. ± 16 Application example Insertion unit for assembling a pin in a bore, in an approximately
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More informationXRAY Grippers - Extreme Force and Torque. Patented Synchronous Technology - Extended Life
XRAY XRAY Grippers - Extreme Force and Torque The XRAY concept was developed for applications that impart high acceleration to heavy objects or require extremely long, precisely positioned jaws. These
More information