Hydraulic Systems Hydraulic Clamping

Size: px
Start display at page:

Download "Hydraulic Systems Hydraulic Clamping"

Transcription

1 ydraulic Systems ydraulic lamping Page ydraulic lamping Page S Series S Series S S S L S L S L S-4 31-L LMPIN TNOLOY

2 19.2 ydraulic Systems Series 1 ydraulic Threaded ody ylinders Product Overview The single-action, spring-return hydraulic power cylinders are small pistons that can be used singly or combined. They offer tremendous force in a small, easily mounted package that can be used in any attitude and requires only a single inlet port. They are often used grouped together by a common manifold to provide as much force as needed for the operation. For a relatively small volume of oil, they provide exceptional exerting force, and are generally the best choice if stroke lengths can be kept short. Threaded body for easy mounting Small size permits low profile workholding ccessories available for easy mounting vailable in metric or inch sizes (Metric on special request) ardened piston and rod Single-acting for simple plumbing Wide variety of sizes and strokes Pressure capacity up to 5, PSI, provided piston does not bottom out Technical Information Model no. S Ports Threaded ody Stoke Force at 3, PSI Oil isplacement ffective rea For lamping amnuts #2 1/ lbs..24 cu. in..11 Furnished #4 3/ lbs..61 cu. in..196 Furnished # ,326 lbs..221 cu. in..442 Furnished #4 1 5/ ,355 lbs..393 cu. in..785 Optional #4 1 5/ ,355 lbs..785 cu. in..785 Optional #4 1 7/ ,31 lbs..884 cu. in Optional #4 1 7/ ,31 lbs cu. in Optional #4 2 1/ ,423 lbs cu. in Optional LMPIN TNOLOY

3 ydraulic Systems Series 1 ydraulic Threaded ody ylinders Standart imensions (PORTIN) F (TR) O (FML TR) imensions (In Inches) Model no. F ex 1/ S # ex 3/ S # ex S # ex 1 5/ S #4 1/ ex 1 5/ S #4 1/ ex 1 7/8ß S #4 5/ ex 1 7/ S #4 5/ ex 2 1/ S #4 5/16-18 Series 52 Flange Mount Model no. imensions (In Inches) ø Ø /8-16 UN /16-16 UN /8-16 UN /8-16 UN /2-16 UN Series 51 am Nut Model no. imensions (In Inches) /8-16 UN /16-16 UN /8-16 UN /8-16 UN /2-16 UN Ø LMPIN TNOLOY

4 19.4 ydraulic Systems Series 2 Thru-ole ydraulic Ram Product Overview y inserting a rod through the hollow piston, these cylinders can be used to push or pull depending on the orientation of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. reater forces are generated in these thru-hole rams because of their larger piston area. Symbol Larger piston diameter for greater clamping forces ardened steel piston and rod Single-acting for simple plumbing Optional threaded inserts Optional mounting plate (permits mounting ram with a single cap screw) Model no. RM Force at Oil imensions Port I..* 3, PSI isplacement S #2.38 4,38 lbs..547 cu. in S #4.5 8,1 lbs cu. in S # ,66 lbs cu. in * learance for rod or bolt of given dimension. Maximum input pressure 3,5 PSI. ccessories ll size thru-hole rams are supplied with a thru-hole insert threaded into the top. Optional threaded inserts, inch or metric, are also available. RM no. Thru-ole Insert (supplied) Loads Trasmitted by Various iameter Screws thru-hole ram easily converts a manual strap clamp into an automatic hydraulic powered clamp. Usually a longer bolt is the only part needed to make this conversion. olt Size Wrench Length F-lbs. (verage) 1/4 UNF 4. 2,4 lbs. 1/4 UNF 4. 1,92 lbs. 3/8 UNF , lbs. 3/8 UNF ,92 lbs. 1/2 UNF 8. 4,2 lbs. 1/2 UNF 8. 3,64 lbs. 5/8 UNF 9. 5,6 lbs. 5/8 UNF 9. 5,6 lbs. 3/4 UNF 9. 4,8 lbs. 3/4 UNF 11. 4,2 lbs. 7/8 UNF 12. 5,4 lbs. To determine how much force is needed to replace a manual clamp, use this chart as a guide. LMPIN TNOLOY

5 ydraulic Systems Series 2 Thru-ole ydraulic Rams Technical Information alculation of Forces Using Straps and Levers Figure #1 When the distance is equal to the distance the force upward from Model Ram is equal to the downward force on the part. Figure #2 The downward force is equal to the upward force times a ratio of the distance :. xample: = 2", = 4", Force = 1, lbs. Force = Force x = 1, lbs. x 4 2 = 2, lbs. Figure #3 When Force from Model ollow ore is divided between &, the forces at & are in inverse ratio to the distance & respectively. Force = Force x Force = Force x xample: = 2", = 4," Force = 1, lbs. Force = 1, lbs. x 4 = lbs. 6 Force = 1, lbs. x 2 = lbs. 6 Power Sources Thru-hole Rams can be powered by automatic pumps, hand pumps, boosters or existing machine hydraulics. Used with automatic pump Used with hand pump Used with booster Multiple Uses Thru-hole Rams can be used to push or pull depending on the position of the ram. Pull Pull Push Pull LMPIN TNOLOY

6 19.6 ydraulic Systems Series 3 ydraulic Swing/Pull lamps 475 lb. The -ST-O Threaded ody Swing/Pull lamps are available in both single-acting and double-acting versions. They incorporate the latest hydraulic swing clamp technology. The top port design allows easy access for plumbing connections. 3-1-S-475 They are available with 9 left or right hand rotation, or with guided straight pull. The breather port on single-acting models may be replaced with tubing for remote venting. The optional arms clamp securely to the piston rod to reduce fatigue and deflection. rms may be easily modified or custom arms may be substituted. dvanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life and 5, PSI operation Triple track piston rod design for field adjustable swing direction ardened and hard chrome plated piston rod for increased strength and wear resistance dvanced metal treated body for superior wear and corrosion resistance MRO interchange design Straight pull capacity 6 lbs. at 5, PSI max Port 25 S 5 T U Port 6 L lamping Force (Lbs.) ydraulic Pressure (PSI) For 475 lb. Swing/Pull lamp rms see Page 19.1 Q M N P R Performance F With 31-L-475 rm (3.25" long) With -31-S-475 rm (1.22" long) at. no. Oper. Swing irection *Force ff. rea (sq. In.) Oil ap. (cu. In.) (lbs.) lamp Unclamp lamp Unclamp Max Oil Flow in 3 /m in Ordering Notes: Left hand swing (ccw) is standard no suffix dd R suffix for right hand swing dd S suffix for straight guided pull 3-1-S-475 (-X) (-X) Single- cting oubleacting Left and (ounter lockwise) Right and (lockwise) at. no. Total lamping lamp Port Unclamp Port F L M N P Q R S T U 3-1-S S-2 S M6x /8-16UN This item is available upon request NOT: *With 1.22" long arm at 5, PSI maximum operating pressure. o not pressurize single-acting only See page 19.1 for arms, accessories and custom arm mounting LMPIN TNOLOY

7 ydraulic Systems Series 3 ydraulic Swing/Pull lamps 1,1lb. The -ST-O Threaded ody Swing/Pull lamps are available in both single-acting and double-acting versions. They incorporate the latest hydraulic swing clamp technology. The top port design allows easy access for plumbing connections. 3-1-S-11 They are available with 9 left or right hand rotation, or with guided straight pull. The breather port on single-acting models may be replaced with tubing for remote venting. The optional arms clamp securely to the piston rod to reduce fatigue and deflection. rms may be easily modified or custom arms may be substituted. dvanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life and 5, PSI operation Triple track piston rod design for field adjustable swing direction ardened and hard chrome plated piston rod for increased strength and wear resistance dvanced metal treated body for superior wear and corrosion resistance MRO interchange design Straight pull capacity 1,4 lbs. at 5, PSI max T Port 25 S 5 Port L U lamping Force (Lbs.) For 1,1 lb. Swing/Pull lamp rms see Page 19.1 N R ydraulic Pressure (PSI) Performance With 31-L-11 rm (5.31" long) With 31-S-11 rm (1.89" long) Q M F P at. no. Oper. Swing irection *Force ff. rea (sq. In.) Oil ap. (cu. In.) (lbs.) lamp Unclamp lamp Unclamp Max Oil Flow in 3 /m in Ordering Notes: Left hand swing (ccw) is standard no suffix dd R suffix for right hand swing dd S suffix for straight guided pull 3-1-S-1 (-X) (-X) Single- cting oubleacting Left and (ounter lockwise) Right and (lockwise) at. no. Total lamping lamp Port Unclamp Port F L M N P Q R S T U 3-1-S S-4 S M8 x 1-3/ UN NOT: *With 1.89" long arm at 5, PSI maximum operating pressure. o not pressurize single-acting only See page 19.1 for arms, accessories and custom arm mounting LMPIN TNOLOY

8 19.8 ydraulic Systems Series 3 ydraulic Swing/Pull lamps 2,4 lb. The -ST-O Threaded ody Swing/Pull lamps are available in both single-acting and double-acting versions. They incorporate the latest hydraulic swing clamp technology. The top port design allows easy access for plumbing connections. They are available with 9 left or right hand rotation, or with guided straight pull. The breather port on single-acting models may be replaced with tubing for remote venting. The optional arms clamp securely to the piston rod to reduce fatigue and deflection. rms may be easily modified or custom arms may be substituted. 3-1-S-24 dvanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life and 5, PSI operation Triple track piston rod design for field adjustable swing direction ardened and hard chrome plated piston rod for increased strength and wear resistance dvanced metal treated body for superior wear and corrosion resistance MRO interchange design Straight pull capacity 3,15 lbs. at 5, PSI max Port 25 S 5 T U Port 35 L lamping Force (Lbs.) Performance ydraulic Pressure (PSI) For 2,4 lb. Swing/Pull lamp rms see Page 19.1 Q M F N P R With 31-L-24 rm (6.36" long) With 31-S-24 rm (2.43" long) at. no. Oper. Swing irection *Force ff. rea (sq. In.) Oil ap. (cu. In.) (lbs.) lamp Unclamp lamp Unclamp Max Oil Flow in3/m in Ordering Notes: Left hand swing (ccw) is standard no suffix dd R suffix for right hand swing dd S suffix for straight guided pull 3-1-S-24 (-X) (-X) Single- cting oubleacting Left and (ounter lockwise) Right and (lockwise) at. no. Total lamping lamp Port Unclamp Port F L M N P Q R S T U 3-1-S S-4 S-4 t M1x /8-16UN NOT: *With 2.43" long arm at 5, PSI maximum operating pressure. o not pressurize single-acting only See page 19.1 for arms, accessories and custom arm mounting LMPIN TNOLOY

9 ydraulic Systems Series 3 ydraulic Swing/Pull lamps 4, lb. The -ST-O Threaded ody Swing/Pull lamps are available in both single-acting and double-acting versions. They incorporate the latest hydraulic swing clamp technology. The top port design allows easy access for plumbing connections. They are available with 9 left or right hand rotation, or with guided straight pull. The breather port on single-acting models may be replaced with tubing for remote venting. The optional arms clamp securely to the piston rod to reduce fatigue and deflection. rms may be easily modified or custom arms may be substituted. 3-1-S-4 dvanced seals and wipers utilize a special, highly wear-resistant construction for long cycle life and 5, PSI operation Triple track piston rod design for field adjustable swing direction ardened and hard chrome plated piston rod for increased strength and wear resistance dvanced metal treated body for superior wear and corrosion resistance MRO interchange design Straight pull capacity 5,5 lbs. at 5, PSI max T U lamping Force (l bs.) Performance ydraulic Pressure (PSI) For 4, lb. Swing/Pull lamp rms see Page Q 5 S 25 F M L N R With 31-L-4 rm (X.XX" long) With 31-S-4 rm (X.XX" (7.1" long) long) (2.75" long) P at. no. 3-1-S-4 (-X) (-X) Oper. Single- cting oubleacting Swing irection Left and (ounter lockwise) Right and (lockwise) *Force ff. rea (sq. In.) Oil ap. (cu. In.) (lbs.) lamp Unclamp lamp Unclamp Max Oil Flow in 3 /m in 14 Ordering Notes: Left hand swing (ccw) is standard no suffix dd R suffix for right hand swing dd S suffix for straight guided pull This item is available upon request at. no. Total lamping lamp Port Unclamp Port F L M N P Q R S T U 3-1-S S#4 S# /2-16UN This item is available upon request NOT: *With 2.75" long arm at 5, PSI maximum operating pressure. o not pressurize single-acting only See page 19.1 for arms, accessories and custom arm mounting LMPIN TNOLOY

10 19.1 ydraulic Systems Series 3 ydraulic Swing/Pull lamps 475-2,4 lb. rms ustom built arms of any length must clamp to the swing/pull clamp s piston rod in a manner similar to the -ST-O arms or some derating of the clamp will be necessary. T P The design feature, in the chart and drawing at the bottom of this page, is recommended for all applications of custom, single arms. See the accompanying chart for design details. In applications where there is no bending stress being transferred into the piston rod (like push/ pull linkages and equalizing double arms), this design detail may be eliminated. In these applications, the clamp s full capacity (referred to as straight pull capacity) is available. I U O M L Q N at. no. I L M N O P Q T U 31-S M Weight (lbs.) M L M S M M L M S M M L M IMPORTNT: ny clamp using a modified or custom arm that is longer or heavier than -ST-O s standard arms must be derated to prevent internal damage. o not exceed the maximum speed and pressure ratings for -ST-O s standard arms. For maximum hydraulic pressure and speed ratings, see the accompanying charts o not use meter-out circuitry for controlling double-acting clamp speeds ontact -ST-O if further design assistance is required ustom rm Mounting imensions for Swing/Pull lamps Shaft ia. F M F 1 MM M6 x 1. 16MM M6 x 1. M 22 MM M8 x 1.25 lamping Force (Lbs.) Max. llowable rm Weight =.35 Lbs Pressure (psi) rm Length (In.) Max Flow (in /min.) lamping Force (Lbs.) Max. llowable rm Weight =.73 Lbs 5 Pressure (psi) rm Length (In.) Max Flow (in /min.) lamping Force (Lbs.) Max. llowable rm Weight = 1.6 Lbs Pressure (psi) rm Length (In.) 49 3 Max Flow (in /min.) hart Legend Maximum Length / Pressure Operating Range lamps must operate at or below maximum/ arm length/pressure curve: To approximate clamping force with any arm at less than maximum pressure: FOR = P x x [1-(P/M x.23)] P = yd. system operating pressure (PSI) = lamp effective area (sq. in.) M = Max. rated pressure of chosen arm length (PSI) LMPIN TNOLOY

11 ydraulic Systems Series 3 ydraulic Swing/Pull lamps 4, lb. rms ustom built arms of any length must clamp to the swing/pull clamp s piston rod in a manner similar to the -ST-O arms or some derating of the clamp will be necessary. V T U P The design feature, in the chart and drawing at the bottom of this page, is recommended for all applications of custom, single arms. See the accompanying chart for design details. In applications where there is no bending stress being transferred into the piston rod (like push/pull linkages and equalizing double arms), this design detail may be eliminated. In these applications, the clamp s full capacity (referred to as straight pull capacity) is available. I M (31-L-4) (31-S-4) L Q at no. I L M P Q T U V Weight (lbs.) 31-S / M L / M IMPORTNT: ny clamp using a modified or custom arm that is longer or heavier than -ST-O s standard arms must be derated to prevent internal damage. o not exceed the maximum speed and pressure ratings for -ST-O s standard arms. For maximum hydraulic pressure and speed ratings, see the accompanying charts o not use meter-out circuitry for controlling double-acting clamp speeds ontact -ST-O if further design assistance is required ustom rm Mounting imensions for 4, lb. Swing/Pull lamps at no. F 32MM M12 x 1.75 F lamping Force (Lbs.) 31-S-4 31-L-4 Max. llowable rm Weight = 2.8 Lbs Pressure (psi) rm Length (In.) 91 3 Max Flow (in /min.) hart Legend Maximum Length / Pressure Operating Range lamps must operate at or below maximum/ arm length/pressure curve: To approximate clamping force with any arm at less than maximum pressure: FOR = P x x [1-(P/M x.23)] P = yd. system operating pressure (PSI) = lamp effective area (sq. in.) M = Max. rated pressure of chosen arm length (PSI) LMPIN TNOLOY

12 19.12 ydraulic Systems Series 39 ir/ydraulic Power oosters The e-sta-o ir/ydraulic Power ooster converts normal shop-line air pressure to high-pressure hydraulic power. The six models available provide oil displacements ranging from 1 cu. in. to 12 cu. in. per stroke. With the system filled, the volume of oil required to actuate a cylinder or pressure point is only equal to the cubic content of the piston displacement. The small booster, producing 1 cu. in. of usable oil per stroke, can operate 5 of the tiny 1/2-2 pressure points a full.22 max. stroke, and even more when strokes are kept to a minimum. uilt-in manifold omplete automatic bleeding with each return stroke utomatic relief of system overcharge utomatic bleeding feature eliminates pre-filling Large volume visible oil reservoir automatically replenishes the system with reserve oil capacity orrosion and wear-resistant materials Wear rings on hydraulic piston tube Unique self-centering air piston assures long life Increases hydraulic pressure to 3, PSI from 1 PSI air-line pressure ll models supplied with S hydraulic ports NPT hydraulic ports available on request Y X S/ YRULI/ PORTS Model no. Press Ratio isplacement Per Nominal Reservoir apacity Weight imensions (Square) Ports 1/4 NPT/ IR PORTS :1 1 cu. in. 1.4 cu. in. 9 lbs S # :1 4 cu. in. 42 cu. in. 23 lbs S # :1 8 cu. in. 96 cu. in. 43 lbs., 8 oz S # :1 5 cu. in. 96 cu. in. 43 lbs S #4 (1 PSI max. input air pressure) Note: Special igh Temperature Seals available for applications where Viton Seals are required. Order as /T option. LMPIN TNOLOY

13 ydraulic Systems Notes LMPIN TNOLOY

hydraulic power clamps

hydraulic power clamps hydraulic power clamps Table of ontents lick Page # View ydraulic lamping Page M-Y-# ydraulic lamping Page M-Y-# 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 3-4 3-1-S-475 3-1--475

More information

hydraulic power clamps

hydraulic power clamps ourtesy of M/Flodyne/ydradyne Motion ontrol ydraulic Pneumatic lectrical Mechanical (8) 426-548 www.cmafh.com hydraulic power clamps Table of ontents ydraulic lamping 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4

More information

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories

1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories 1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody

More information

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder.

RC-Series DUO Cylinders, Single-Acting. The Industry Standard General Purpose Cylinder. R-Series UO ylinders, Single-cting Shown from left to right: R-506, R-50, R-2510, R-4, R-10010, R-55, R-1010 The Industry Standard General Purpose ylinder s ll R cylinders are equipped with hardened removable

More information

BVA Limited Lifetime Warranty

BVA Limited Lifetime Warranty 1 The V dvantage V Industrial Hydraulics was launched in 2005 and is centrally located in urope in tten-leur, The Netherlands. V is one of the Shinn u urope brands besides Omega Lift, Omega Mechanix and

More information

Opmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1

Opmaak_BVA_Catalog_2007.qxp 4/16/ :32 PM Page 1 Opmaak_V_Catalog_2007.qxp 4/16/2008 12:32 PM Page 1 2008 Opmaak_V_Catalog_2007.qxp 4/14/2008 3:36 PM Page 2 Index Single cting Cylinders 3 Lock-nut Cylinders 6 Threaded Cylinders 7 Flat ody Cylinders 8

More information

Press Section Overview

Press Section Overview Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication

More information

The BVA Advantage. Confidence Built on Quality

The BVA Advantage. Confidence Built on Quality 1 The V dvantage V Hydraulics was launched in 2003 and is centrally located in the United States in Kansas ity, Missouri. V is one of the Shinn u of merica ompanies including; Hein-Werner, Omega Lift,

More information

Work supports - Collet-Lok design

Work supports - Collet-Lok design ork supports - ollet-ok design Shown: PS-1, PTS-1 Hydraulically locked, mechanically maintained work support ollet-ok products ollet-ok design allows the work support to maintain support position after

More information

TABLE OF CONTENTS. power pumps. cylinders. accessories. hand pumps. INTRODUCTION pages 1-5

TABLE OF CONTENTS. power pumps. cylinders. accessories. hand pumps.   INTRODUCTION pages 1-5 TLE OF ONTENTS INTRODUTION pages 1-5 power pumps Index...1 ompany Overview... 2-3 Safety Tips... 4-5 Introduction... 42-43 Proper Size & Selection... 44-45 G1 Series Electric... 46-47 G3 Series Electric...

More information

ENERPAC hydraulic valves are available in a wide variety of models and configurations.

ENERPAC hydraulic valves are available in a wide variety of models and configurations. irectional ontrol s EE hydraulic valves are available in a wide variety of models and configurations. Whatever your requirements directional control, flow control, or pressure control you can be sure that

More information

POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps

POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203

More information

ENERPAC hydraulic cylinders are available in hundreds of different configurations. Whatever the X

ENERPAC hydraulic cylinders are available in hundreds of different configurations. Whatever the X uy Online at www.uynerpac.com nerpac ydraulic s & Lifting Products NRPC hydraulic cylinders are available in hundreds of different configurations. Whatever the X I W bending, holding whatever the force

More information

High Pressure Industrial Hydraulic Equipment

High Pressure Industrial Hydraulic Equipment High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile

More information

POWER CLAMPING.

POWER CLAMPING. www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44

More information

High Pressure Industrial Hydraulic Equipment

High Pressure Industrial Hydraulic Equipment High ressure Industrial Hydraulic quipment uilt o Last L O ONNS s 3-20 Single cting s 4-5 ouble cting s 6 Lock Nut s 7 Hollow Hole s 8 ouble cting Hollow Hole s 9 lat ody s 10 lat ody Kits 11 Low rofile

More information

Turbo II Air Hydraulic Pumps. Setting New Standards.

Turbo II Air Hydraulic Pumps. Setting New Standards. Turbo II Hydraulic Pumps Shown left to right: PMG142N, PTG2N, PRG2N, PTG5N Setting New Standards High efficiency cast aluminum air motor for increased life and reduced air consumption Fully serviceable

More information

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in. Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.

More information

Biffi Morin HP Series actuator

Biffi Morin HP Series actuator HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits

More information

Power Take-Off Clutches

Power Take-Off Clutches IST. UTORIZO Power Take-Off lutches Superior torque control for heavy duty diesel engines Wichita has instituted quality assurance procedures aimed at achieving the ultimate in product reliability and

More information

Tension Brakes/Air Cooled

Tension Brakes/Air Cooled IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple pumps 5 rive shaft 6 Front cover 7 Line ports

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F RE 10 089/02.07 Replaces: Series F Issue 04.04 AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple

More information

Selection table. Manually operated pumps. Electric driven mini pumps. Air driven single stage pumps. Air driven two stage pumps

Selection table. Manually operated pumps. Electric driven mini pumps. Air driven single stage pumps. Air driven two stage pumps INX PUMPS Hydraulic Pumps Selection table 22 HP Range Manually operated pumps 23 HP Range General information on electric driven pumps 24 HP1 Range lectric driven mini pumps 24 HP3 Range lectric driven

More information

SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS

SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS SPRAGUE PRODUCTS AIR DRIVEN HYDRAULIC PUMPS A variety of hydraulic pumps is offered for various liquid output pressure up to 33,500 psi (2311 bar). Sprague Products pumps service water, oil and most corrosive

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.

More information

Linear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to

Linear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to ylinder ccessories Page Linear lignment oupler MLOK Rod lamp Flange ouplers and Weld Plates Spherical Rod ccessories 19 150-151 15 15 Milwaukee ylinder provides various cylinder accessories to maximize

More information

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63 otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through

More information

Tension Brakes/High Heat Capacity

Tension Brakes/High Heat Capacity IST. UTORIZO Tension rakes/igh eat apacity MX (55) 53 63 23 31 Steel Water ooled rakes ost effective design One piece water jacket eliminates leakage Release springs ensure complete disengagement New friction

More information

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"

Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16 or 3/8 Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated

More information

Push/Pull Cylinders G-1. Frequently Asked Questions. Frequently Asked Questions, Features

Push/Pull Cylinders G-1. Frequently Asked Questions. Frequently Asked Questions, Features Frequently Asked Questions, Features G-1 Frequently Asked Questions What is the intended application of these devices? They are intended for use actuating remote mechanisms, pulling on clamp plates, or

More information

Dimensional Data Clevis / Brackets / Pins / rod Eyes

Dimensional Data Clevis / Brackets / Pins / rod Eyes Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001

More information

Collet Chucks and Collets

Collet Chucks and Collets ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16

More information

Valvair Manual Spool Valves

Valvair Manual Spool Valves Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55

More information

60-TON-S/D HYDRAULIC

60-TON-S/D HYDRAULIC SPX Corporation 88 th Street Rockford, IL 09-99 US Internet ddress: http://www.powerteam.com Tech. Services: (800) 77-8 Fax: (800) 7-8 Order Entry: (800) -8 Fax: (800) 88-70 Form No. 0000 Operating Instructions

More information

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Rod end male thread. With rubber bumper 056(9/16) 075(3/4) 106(1 1/16) 150(1 1/2) 250(2 1/2) 300(3) T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod

More information

Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT

Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT ir ctuated 3-Way all Valves -Port rass, Standard Port 1/4 to 3 SERIES eatures Spring Return or ouble cting Standard Port 3-way flow path irect mount brass valve using standard ISO5211 ctuators designed

More information

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691 Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................

More information

Cylinders. Standard Features F-1. Frequently Asked Questions, Features

Cylinders. Standard Features F-1. Frequently Asked Questions, Features Frequently Asked Questions, Features Why use Cylinders? Cylinders are the most common and least costly form of hydraulic clamping avail able. They can be sized adequately to allow you to clamp across or

More information

NFPA Aluminum & Steel Cylinders

NFPA Aluminum & Steel Cylinders Section 11 NFP luminum & Steel ylinders Page T-11-18 ylinder with 01 (MS4) Side Tapped Page T-11-22 ylinder with 03 (MF1) Head ectangular Flange Page T-11-24 ylinder with 03 (M3) Head Square Flange Series

More information

pneumatic swing clamps

pneumatic swing clamps pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects

More information

DIST. AUTORIZADO. Design Features

DIST. AUTORIZADO. Design Features IST. UTORIZO MX (55) 53 63 23 31 Kopper Kool rakes opper disc design for high heat dissipation xternal air and water connections ccurate control igh Temperature O-Rings New friction material lasts longer

More information

Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system

Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system 45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator

More information

Housings and Miscellaneous Parts

Housings and Miscellaneous Parts Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1

More information

Enerpac Hydraulic Tools

Enerpac Hydraulic Tools Enerpac Hydraulic Tools Enerpac offers an extensive range of dedicated tools for a variety of specific and flexible applications. Whatever your requirement cutting, punching, spreading or bending you can

More information

Hydraulic Jacks & Tools Test rig

Hydraulic Jacks & Tools Test rig ydraulic Jacks & Tools Test rig ydraulic test rig for hoisting equipment model RPYS-1215 Capacity max. 12 t or testing pul-lifts, lever hoists, chain blocks, wire rope pullers as well as other lifting

More information

L & S Series Linear Slides

L & S Series Linear Slides & S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo

More information

DURA-SLIDE MM-SERIES JJ-SERIES. Air Shuttles. MM-Series - 2 Position Shuttle. JJ-Series - 3 Position Shuttle 2 POSITION SHUTTLING DEVICE

DURA-SLIDE MM-SERIES JJ-SERIES. Air Shuttles. MM-Series - 2 Position Shuttle. JJ-Series - 3 Position Shuttle 2 POSITION SHUTTLING DEVICE DUR-SLIDE ir Shuttles MM-SERIES 2 POSITION SHUTTLING DEVIE JJ-SERIES 3 POSITION SHUTTLING DEVIE DUR-SLIDE MM and JJ Series of ir Shuttles are another R&I development made to answer the automation industry

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & Hydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and Hydraulics (I) Pvt. Ltd.

More information

HV gate valve with protective ring Series 17

HV gate valve with protective ring Series 17 HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F

More information

Double Pump Operating Specifications

Double Pump Operating Specifications Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12

More information

DT (700 Series) Hydraulic Motor

DT (700 Series) Hydraulic Motor DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7

More information

Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099

Sold & Serviced By: ELECTROMATE. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 Table of ontents Pages esign onsiderations to Linear earings, Pillow locks and arriage ssemblies 7 to 3 Precision ing, Supports and ssemblies 37 to 5 Terms of Sale Inside ack over LINTH Standard Positioning

More information

hand pumps HAND PUMPS

hand pumps HAND PUMPS HAND PUMPS 30 Introduction Adjustable pivot for the absolute lowest handle effort Pivoting linkage reduces wear for longer pump life Fine threaded, no slip release knob for complete control Large bronze

More information

DB MX1 5" 12" 2" S P S

DB MX1 5 12 2 S P S BOOSTER MODEL CODE DB MX1 5" 12" 2" S P S 1 2 3 4 5 6 7 8 1 Model Series 6 Port Styles SB Single Pressure Booster S SAE DB Dual Pressure Booster N NPT AOT Air-Oil Tank 2 Mounting Style (Pages 7-48) 7 Seals

More information

HV gate valve Series 11

HV gate valve Series 11 HV gate valve Series 11 Main applications General purpose valve for isolation in high vacuum systems Especially suited to pump isolation Ordering information Valve with manual actuator crank handle Ordering

More information

A UNIT OF APPLIED POWER. Hydraulic Power. Power for all Industrial Applications. E321e

A UNIT OF APPLIED POWER. Hydraulic Power. Power for all Industrial Applications. E321e Hydraulic e UNIT OF PPLI POWR Power for all Industrial pplications Hydraulic Power for all Industrial pplications e Table of ontents Introduction The World of nerpac... 4 ylinders (Hydraulic) 6- Introduction...

More information

Installation, Maintenance & Operating Instructions

Installation, Maintenance & Operating Instructions -SS VVS nstallation, aintenance & Operating nstructions - SS VVS TO The ulflo -Series feature both direct acting and internal pilot operated models with either screw or flange type connections. The threaded

More information

LINK CLAMP CYLINDERS COMPENSATION SYSTEM /2015. Metal wiper (upon request) Compensation system. Flow control valve (upon request)

LINK CLAMP CYLINDERS COMPENSATION SYSTEM /2015. Metal wiper (upon request) Compensation system. Flow control valve (upon request) CG LINK CLMP CYLINDERS Compensation system Metal wiper (upon request) VCS unclampimg control valve (upon request) Flow control valve (upon request). COMPENSTION SYSTEM LEVER CUP SPRING PIN ELSTIC RING

More information

VB-9313 Series. Application. Features. Applicable Literature

VB-9313 Series. Application. Features. Applicable Literature V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or

More information

Morin Figure HP Actuator

Morin Figure HP Actuator 1,500 psig Operating Pressure Rating Direct Gas/Hydraulic ctuators Ductile Iron/Stainless Steel Quarter-turn Double cting and Spring Return Models Features and enefits High pressure construction eliminates

More information

Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.

Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category. Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve

More information

Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT

Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT ir ctuated all Valves 3-Way T-Port Stainless Steel, ull ore 1/4 to 2 SRIS eatures ull Port 3-way T flow path irect mount valve with standard ISO5211 mount 316 stainless steel body, ball and stem ctuators

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

Dimensions / Technical Data / Order Codes

Dimensions / Technical Data / Order Codes Fluid Level / Temperature Indicators / / rder odes Level Gauge SN D Design of Scale Plates Thermometer ptions apillary Tube Thermometer with a dual elsius / Fahrenheit scale up to +80 / +80 F L3 YUR LG

More information

HANNAY REELS. Spray Hose Reels. The reel leader. Reels to handle hose for: Grounds Maintenance Pest Control Vehicle Maintenance Steam Cleaning

HANNAY REELS. Spray Hose Reels. The reel leader. Reels to handle hose for: Grounds Maintenance Pest Control Vehicle Maintenance Steam Cleaning Spray ose Reels NNY RLS The reel leader. Reels to handle hose for: rounds Maintenance Pest ontrol Vehicle Maintenance Steam leaning Lawn are Service Tree Spraying eneral Maintenance griculture -9450-S

More information

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed

More information

Combination Clutch/Brake

Combination Clutch/Brake ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive

More information

UHV gate valve Series 10

UHV gate valve Series 10 UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric

More information

UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series

UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable

More information

Your Global Source for Today s Most Popular Solenoid Valves

Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt

More information

- hydraulic tools & equipment -

- hydraulic tools & equipment - - hydraulic tools & equipment - PUMPS YLINRS PULLRS JKS TOOLS SSORIS 1-18 let your boss do the hard work oss ydraulics was born from over 150 years of collective experience in the ustralian market. t oss

More information

VB-9313 Series. Application. Features. Applicable Literature

VB-9313 Series. Application. Features. Applicable Literature V-9313 Series 2-1/2" and 3" Screwed NPT 2-1/2" to 6" 125 Lb. Flanged Three-Way Mixing s General Instructions pplication V-9313 series three-way mixing valves control hot or chilled water in heating or

More information

Ball Bearing Positioners miniature and standard

Ball Bearing Positioners miniature and standard all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:

More information

3.3 VARIABLE DISPLACEMENT MECHANICAL COMPENSATION

3.3 VARIABLE DISPLACEMENT MECHANICAL COMPENSATION . VRIBL ISPLMNT MHNIL OMPNSTION ONTNTS PVV101 Ordering ode..1 Mechanical compensation Technical Information..2 Specifications.. Hydraulic fluids..4 Viscosity range..5 Temperature range..6 Seals..7 Filtration..8

More information

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)

More information

Nitro-Dyne XP Manifold Cylinders and Systems

Nitro-Dyne XP Manifold Cylinders and Systems Nitro-yne XP Manifold Cylinders and Systems Introduction In 1964, we delivered our first manifold system to a customer who chose it for its consistent force with every stroke, force adjustability, reduced

More information

Ductile Iron/Stainless Steel Cylinders Quarter-turn Spring Return and Double Acting Actuators Output Torques to 1,374,000 lb.in.

Ductile Iron/Stainless Steel Cylinders Quarter-turn Spring Return and Double Acting Actuators Output Torques to 1,374,000 lb.in. Features and enefits Ductile iron housing, piston and end caps provide long product life with durable, cost effective operation. Output shaft made of high strength alloy steel or 17-4PH stainless transmits

More information

APCO CVS-6000/6000A SWING CHECK VALVES

APCO CVS-6000/6000A SWING CHECK VALVES ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,

More information

Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT

Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance

More information

2192 mm (86.3 in.) or mm (116.6 in.) mm (116.6 in.)

2192 mm (86.3 in.) or mm (116.6 in.) mm (116.6 in.) SPIITIONS ngine 640L / 648L 748L Manufacturer / Model John eere PowerTech PSS 6.8L John eerepowertech 6.8L John eere PowerTech PSS 6.8L John eere PowerTech 6.8L Off-Road mission Standards P inal Tier 4

More information

Air Driven Hydraulic Pumps, Gas Boosters, Power Units, Specialty Valves & Accessories L & LS SERIES

Air Driven Hydraulic Pumps, Gas Boosters, Power Units, Specialty Valves & Accessories L & LS SERIES Air Driven Hydraulic Pumps, Gas Boosters, Power Units, Specialty Valves & Accessories L & LS SERIES Sprague Products Division of Curtiss-Wright Flow Control Corporation TABLE OF CONTENTS Page SPRAGUE PRODUCTS

More information

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi

High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed

More information

Disc Valve Hydraulic Motors 2000 Series

Disc Valve Hydraulic Motors 2000 Series Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.

More information

Air Driven Gas Boosters

Air Driven Gas Boosters Features & Benefits Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for higher pressure, lower volume air or gas. Industrial

More information

Pump Mounted Directional Control Valves

Pump Mounted Directional Control Valves E327 US Table of ontents Introduction The World of Enerpac.... 2-3 ylinders (Hydraulic) 4-55 Introduction... 4-5 R-UO, Single-cting ylinders....6-9 R-UO, ylinder ccessories....10 R-, luminum ylinders Introduction...11

More information

197C. Valve Group. Series Farris Engineering Pressure Relief Valves

197C. Valve Group. Series Farris Engineering Pressure Relief Valves 97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit

More information

SEVERE SERVICE PISTON PUMPS

SEVERE SERVICE PISTON PUMPS IR POWERED SPRYERS INTRODUING THE POWROT SERIES SEVERE SERVIE PISTON PUMPS Titan Powroat ir Powered Sprayers are tireless workhorses So tough they are virtually indestructible. Severe Service means twice

More information

Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.

Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The

More information

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

Rotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM

Rotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight

More information

Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders

Catalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Fittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)

Fittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar) ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing

More information

UNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT

UNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT The series hose crimper with Micrometer Style Adjustment and 35 tons of crimping force has the capability to crimp hoses up to " 2 wire and 3/4" 4 wire. UNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT

More information

WORKHOLDING. Collet Blocks TURNING MILLING GRINDING WORKHOLDING ROTARY.

WORKHOLDING. Collet Blocks TURNING MILLING GRINDING WORKHOLDING ROTARY. WORKHOLDING ollet Blocks TURNING MILLING GRINDING WORKHOLDING ROTRY www.hardinge.com Part Setup Reduction Hardinge has several options for holding single or multiple parts on your machine table, in trunnions

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

ALLENAIR CORP. DISPENSING & TRANSFER PUMPS

ALLENAIR CORP. DISPENSING & TRANSFER PUMPS ALLENAIR CORP. DISPENSING & TRANSFER PUMPS ALL STAINLESS STEEL AVAILABLE Allenair Manufactures Dispensing & Transfer Pumps For the pumping and transfer of most liquids. Accurately dispense various food

More information