Clamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3

Size: px

Start display at page:

Download "Clamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3"

Daniel Mitchell
6 years ago
Views:

equipment rill chucks Reducing bushes Centre

and-operated chuck Power chuck Collet chuck

From page 40-34 ssembly aids Tool holders

From page 40-48 VI holders Quick-change tool

From page 40-99 Precision clamp Vices C machine

clamping systems Vacuum clamping plate From page

Clamps Stretchers Power clamps sets From page

1 equipment rill chucks Reducing bushes Centre points Front-face carrier From page 40-3 and-operated chuck Power chuck Collet chuck ydraulic cylinder From page Jaws Slot nuts From page ssembly aids Tool holders ydraulic expansion chuck Shrinking technology From page VI holders Quick-change tool holder CC bar pullers Rotary tables Powered tools From page Precision clamp Vices C machine vices Centring clamps From page Zero-point clamping systems Vacuum clamping plate From page Eccentric clamping systems Quick clamps Clamps Stretchers Power clamps sets From page ifting belts Magnets Magnetic chucks Rope Chains Slewing crane From page

The special solution re you looking for solutions

We offer you the right tools for a wide variety of

Our technicians will be glad to advise you.

chuck, patented system Tombstones with T-slot or

Cartridge mandrels for fine machining in production

pull-in forces of clamping systems in machining

2 The special solution re you looking for solutions not found within our catalogue? We offer you the right tools for a wide variety of problems. Contact us. Our technicians will be glad to advise you. Chucks with box jaws Compensation pieces for lathe chuck, patented system Tombstones with T-slot or hole matrix Powered tools for special applications Cartridge mandrels for fine machining in production force measuring instruments for checking the pull-in forces of clamping systems in machining spindles SMRT JW The intelligent clamping jaw for direct clamping force measurement while the workpiece is clamped 40-2

Precision drill chuck Goldstück With clamping force booster Special design for the highest torques (clamping forces) high true running accuracy of 0.

3 Precision drill chuck Goldstück With clamping force booster Special design for the highest torques (clamping forces) high true running accuracy of 0.03 The clamping force booster can be used to double the holding force with internal taper I 238 Suitable for clockwise and anticlockwise rotation Supplied with chuck key 1 2 range Taper support , Precision drill chuck SF self-clamping Self-tensioning allows for simple and quick operation Easy manual clamping and opening (wrench not required) all wear parts case-hardened, ground and exchangeable For clockwise rotation Internal taper I ISO 239- rill chuck approved for speeds of up to 35,000 rpm further sizes, versions with fastening screw thread UF and with diamond-coated clamping jaws available on request *Contrary to I 239, shortened by 7 range Taper support 1 2 0,2-1, , , , , , , , ,5-6, , , , , , , , * 95, Precision drill chuck CF for C machines self-clamping keyless locking at the adjusting ring prevents accidental release of the maximum clamping force caused by a sudden change in speed For clockwise rotation Internal taper I ISO 239- available with diamond-coated clamping jaws on request 1 2 range ll prices in euro, VT excluded Taper support 1 2 0, , , Prices in bold print = delivery ex stock 40-3

4 Quick-release drill chuck SPIRO Precision design Self-clamping without wrench, self-acting tensioning Particularly suitable for high speeds and precision work For clockwise rotation Internal taper I 238 True running accuracy 0.05 further sizes available on request 1 2 range Taper support ,5 90, ,5 90, , ,5 106, Quick-release drill chuck SPIRO SK Precision design With clamping force locking mechanism Self-clamping without wrench, self-acting tensioning suitable for high-speed machines no unwanted release when the spindle stops 1 2 range Taper support , , Keyed chuck PRIM Internal taper I 238 Industrial version with key further sizes available on request range 40-4 Taper support Wrench size 1 2 0, S1 47,5 57,5 29, , S , S , S , S3 67, S , S4 92,5 113, Female thread also suitable for haer drill machines Industrial version with key Sunk sleeve, thus suitable for haer drill Internal thread 3/8 x 24 available on request range Female thread Wrench size ,8-10 1/2 x 20 S2 49, , ,5-13 1/2 x 20 S , /2 x 20 S3 68,5 87, with through-hole, with internal thread with a key for clockwise and anticlockwise rotating drilling and haer drill machines range Female thread Wrench size Through-hole 1 2 0,8-10 3/8 x 24 S2 5,5/90 49, , ,8-10 1/2 x 20 S2 6,5/90 49, , ,5-13 1/2 x 20 S2 6,5/ , Spare key I 6349 for keyed drill chuck Wrench size Pin Ø eight S S S S

5 Quick-release drill chuck SUPR Clockwise rotation without wrench, self-clamping further sizes and inside thread 3/8 x 24 available on request Internal taper in accordance with I 238 range Taper support ,5 86,1 40, ,5 89,1 40, , ,5 65, , ,4 35, , ,8 86,1 40, ,5 106, ,5 106, Female thread range Female thread /2 x ,4 35, /2 x 20 79,5 86,1 40, /2 x , /2 x 20 87,5 97, Quick-release drill chuck SUPR SK with clamping force locking mechanism Industrial version Clockwise rotation Female thread without wrench, self-clamping specifically for haer drills and machines with high-level of natural frequencies 1 2 range Female thread 1 2 0,5-10 3/8 x , ,5-10 1/2 x , ,0-13 1/2 x 20 74,2 83,3 42, Quick-release drill chuck EXTR With retaining ring keyless drill chuck for cordless screwdrivers, cordless drills and corded drills with hexagon for assembly and disassembly on the machine spindle through-hole, thus suitable for clockwise and anticlockwise rotation 1 2 standard design range Female thread Mach. output max. W /2 x ,9 42, /8 x ,9 42, ,5-13 1/2 x ,5 72,4 42, ,5-13 3/8 x ,5 72,4 42, RV version with radial locking mechanism suitable for haer drill o additional locking required range Female thread ll prices in euro, VT excluded Mach. output max. W /2 x ,9 42, /8 x ,9 42, ,5-13 1/2 x ,5 72,4 42, ,5-13 3/8 x ,5 72,4 42, Prices in bold print = delivery ex stock 40-5

6 Precision drill chuck SF-plus with mounting shank compact design high stability and high true running accuracy For clockwise rotation dvantage: Compared to a two-part system, consisting of a taper and drill chuck, the SF drill chuck is a total of 21 shorter. Version with diamond-coated clamping jaws available on request MT socket range MK , MK , MK 4 86, MK , MK , MK , Straight shank range , rill chuck attachment without drill chuck alloyed case-hardened steel with tensile strength at core of min. 800 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm ccuracy: Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < SK 30 fi xtures available on request I 2080 Taper support 40-6 SK , SK SK SK SK I Taper support SK , SK SK SK SK JIS 6339 (MS 403 T) Taper support SK , SK SK SK SK

Plug-in shank for drill chuck with internal taper in accordance with I 238- with morse taper shank and tangs ardened and ground further sizes available on request Taper support Taper Ø MK 1 10 10,095

MK 3 12 12,065 400180 0312 MK 3 16 15,733 400180 0316 MK 3 18 17,78 400180 0318 MK 4 16 15,733 400180 0416 MK 4 18 17,78 400180 0418 4107 Precision plug-in shank for drill chuck with internal taper

7 Plug-in shank for drill chuck with internal taper in accordance with I 238- with morse taper shank and tangs ardened and ground further sizes available on request Taper support Taper Ø MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , MK , Precision plug-in shank for drill chuck with internal taper in accordance with I 239- with morse taper shank and tangs ardened and ground further sizes available on request Taper support * Sensitive drill feed F to be held in a drill chuck or in the internal taper of a drilling machine In order to drill the smallest holes delicately, the feed is performed manually by pulling the push ring an integrated spring returns the drill chuck to the home position rill stroke = 20 d 1 2 MK Ø Chuck removal tool G correct removal of the drill chuck from the drill chuck attachment Prevents damage to drill chucks, machine spindles or tapers b ll prices in euro, VT excluded e suitable for taper support , , Prices in bold print = delivery ex stock 40-7

8 O U VEU UEVO C short drill chuck with spur gear system via spur gear system high true running accuracy and clamping force Short clamping and retrofi tting times very short design Suitable for clockwise and anticlockwise rotation for machining centres and CC lathes, for drilling, reaming, countersinking, thread cutting and simple fi nishing milling tasks area Max. eccentricity (at 15 m tightening torque) Max. permitted tightening torque Max. permitted speed with balanced (unbalanced) tool m 35,000 min -1 (7,000 min -1 ) range 0.5 to 16.0 EW UOVO Y Retention force (at 20 m tightening torque) 90 I Suitable hexagon wrench SW 6 range 0,5-16 SK JIS 6339 (MS T) range 0,5-16 SK I SK Type range 0,5-16 SK VI tool holding fixture I central coolant supply range 0,5-16 VI ,5-16 VI C short drill chuck with worm gear by means of an integrated worm gear range 1.0 to 16.0 high true running accuracy of max Suitable for clockwise and anticlockwise rotation Minimum span length 22 at a diameter of 1.0 ong endurance, wear parts hardened and ground Pre-balanced up to 7,000 rpm with a residual imbalance of max. 40 g Supplied with hexagon wrench area Max. eccentricity (at 14 m tightening torque) Max. permitted tightening torque Max. permitted speed with balanced tool Retention force (at 14 m tightening torque) m 35,000 min range 1.0 to 16.0 I Suitable hexagon wrench SW 4 range SK SK JIS 6339 (MS T) range T I (SK) range SK Polygon shank ISO range C C I (VI) range VI VI

9 C short drill chuck with spur gear system Goldstück via spur gear system high true running accuracy 0.03 very high clamping force Suitable for clockwise and anticlockwise rotation Supplied with hexagon wrench I 2080 I range SK 40 1, SK 50 1, range SK 40 1, SK 50 1, ll prices in euro, VT excluded C short drill chuck with spur gear system via spur gear system Maximum true running accuracy high clamping force Short clamping and retrofi tting times very short design Suitable for clockwise and anticlockwise rotation additional I versions available on request I 2080 I range SK 40 0, SK 40 2, SK 50 0, SK 50 2, range Type Shape / SK 40 0, SK 40 2, SK 50 0, SK 50 2, MS 403 T - Form / range T40 0, T40 2, T50 0, T50 2, with internal taper in accordance with I 238 range area Max. eccentricity (at 15 m tightening torque) Max. permitted tightening torque Max. permitted speed with balanced (unbalanced) tool Retention force (at 15 m tightening torque) Retention force (at 20 m tightening torque) , , m 35,000 min -1 (7,000 min -1 ) Suitable hexagon wrench SW Prices in bold print = delivery ex stock 40-9

10 C short drill chuck S self-clamping, clockwise rotation self-clamping, enables a quick tool change dditional increase in clamping force possible using the chuck key provided True running 0.05 additional versions available on request I 2080 I range SK range SK Extension sleeves type for tools with morse taper hardened, ground inside and outside Extension sleeve Inner taper = outer taper Taper external Taper internal ength MK 1 MK MK 2 MK MK 3 MK MK 4 MK MK 5 MK extended reducing bush Inner taper < outer taper Taper external Taper internal ength MK 2 MK MK 3 MK MK 3 MK MK 4 MK MK 4 MK MK 4 MK MK 5 MK MK 5 MK MK 5 MK MK 5 MK MK 6 MK MK 6 MK Expansion sleeve Inner taper > outer taper (for easy machining) Taper external Taper internal ength MK 1 MK MK 2 MK MK 3 MK MK 4 MK

11 Reducing bushes type for tools with morse taper hardened, ground inside and outside Taper external Taper internal ength MK 1 MK MK 2 MK MK 3 MK MK 3 MK MK 4 MK MK 4 MK MK 4 MK MK 5 MK MK 5 MK MK 5 MK MK 5 MK MK 6 MK MK 6 MK MK 6 MK Ejector drift For tool taper I 228 Special steel, hardened tempered to a burnished tone Standard for Morse tapers for metr. taper Total length Cross section x x x x x Semi-automatic with plastic-coated handle and fi nger guard for Morse tapers athe mandrel Total length Cylindrical surface and centre hole ground Case-hardened steel Workpieces with bore lengths of up to 1.5 x nominal diameter of the bore hole are held securely in the tolerance fi elds J6, 6, 7 and G6 Ø Total length Ø Total length ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-11

12 Fixed centre point (centring point) Morse taper I point angle Ground surfaces Versions: Full centre punch made of WS steel, fully ground Full centre punch with carbide insert alf centre punch made of WS steel, fully ground alf centre punch with carbide insert Full centre punch Ø ength kg WS steel Carbide metal MK 1 12,2-80 0, MK 1 12, , MK , MK , MK 3 24, , MK 3 24, , MK 4 31, , MK 4 31, , MK 5 44, , MK 5 44, , alf centre punch Ø ength WS steel Carbide metal MK 1 12,2 80 7, MK MK 3 24, MK 4 31, MK 5 44, , ive centres with replaceable inserts ive centres for replaceable inserts (supplied without inserts) Total length E Workpiece weight max. kg Eccentricity MK , MK 3 128, , , MK 3 135, , MK 4 169, , MK , E replaceable inserts 60 suitable for centre punch tip C , , C replaceable inserts 75 suitable for centre punch tip C , , , C 40-12

replaceable inserts 90 suitable for centre punch tip C 401550 0020 16 14,5 401551 9020 401550 0030 20 16,5 401551 9030 401550 0031 24 19 401551 9031 401550 0040 28 21,5 401551 9040 401550 0050 38 29

accordance with company standard for high speeds and axial loads Excellent true running accuracy thanks to high-end bearing completely hardened and ground Maintenance-free permanent lubrication Shaft

speed r/min Workpiece kg Eccentricity MK 3 52 25 23,83 94 30 57 12000 300 max. 0.003 401520 0003 MK 4 60 28 31,27 106 35 63 10000 600 max. 0.003 401520 0004 MK 5 72 35 44,4 136 43 82 8000 1200 max.

13 replaceable inserts 90 suitable for centre punch tip C , , , Set with 7 replaceable inserts in a wooden box Contents 1 centre point; 1 insert each 60, 75, 90 ; 2 internal tapers 60 hollow; 1 external taper 60 blunt; 1 insert 60 /30 Workpiece weight max. kg MK MK MK MK MK Rotating precision lathe edges C igh-performance specially for CC lathes raw-off nut in accordance with company standard for high speeds and axial loads Excellent true running accuracy thanks to high-end bearing completely hardened and ground Maintenance-free permanent lubrication Shaft sealing ring prevents the ingress of dirt and coolant With additional sealing also suitable for grinding applications standard design d d1 l1 l2 max. speed r/min Workpiece weight max. kg Eccentricity MK , max MK , max MK , max MK , max slim version d d1 l1 l2 d3 max. speed r/min Workpiece weight max. kg Eccentricity MK , max MK , max MK , max MK , max igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-13

Rotating lathes edges, spring-loaded Replaceable centre-punch inserts, straight shank spring-loaded version for axial longitudinal displacement when machining completely hardened and ground

4 Replacement of inserts via ejecting drift Supplied without insert Ø d d1 d2 l1 l2 max. speed r/min Workpiece weight max. kg Eccentricity 3/4 40 18 19,05 12 90 4 38 4000 200 max. 0.

0 Replace the inserts by twisting in opposite directions using two spanners on the fl ats of the axis and insert (SW 17) Ø d d1 d2 l1 l2 Rotational speed max. r/min Workpiece weight max.

14 Rotating lathes edges, spring-loaded Replaceable centre-punch inserts, straight shank spring-loaded version for axial longitudinal displacement when machining completely hardened and ground Maintenance-free permanent lubrication Shaft sealing ring prevents the ingress of dirt and coolant Spring stroke 2.4 Replacement of inserts via ejecting drift Supplied without insert Ø d d1 d2 l1 l2 max. speed r/min Workpiece weight max. kg Eccentricity 3/ , max max max Spring stroke 3.0 Replace the inserts by twisting in opposite directions using two spanners on the fl ats of the axis and insert (SW 17) Ø d d1 d2 l1 l2 Rotational speed max. r/min Workpiece weight max. kg Eccentricity , max max max exchangeable inserts escription d d1 Pointed centre Copying centre Rotating precision centring taper For machining tubes and hollow bodies with large holes and centres completely hardened and ground Maintenance-free permanent lubrication Shaft sealing ring prevents the ingress of dirt and coolant d d1 l1 a Rotational speed max. r/min Workpiece weight max. kg Workpiece weight d max. kg Eccentricity MK , max MK , max MK , max MK , max ive centres 60 point angle lightweight design eedle bearing results in an extremely slim design djustment possibilities for radial play Projecting length ead Ø Moving point Ø x length Eccentricity Workpiece weight max. kg MK 1 56, x MK x MK x MK 4 82, x MK x MK x

ive centres thin version, 60 point angle due to the small casing diameter there is no support, tool holder or lathe tool in the way Projecting length ead Ø Moving point Ø x length Eccentricity

005 800 6300 401501 0004 MK 5 104 58 30 x 34 0.01 1600 4300 401501 0005 MK 6 143 80 42 x 49 0.

kg max. speed r/min MK 2 73 32 15 x 29 0.008 170 7000 401505 0002 MK 3 74 34 15 x 30 0.008 340 7000 401505 0003 MK 4 88,5 42 20 x 38 0.008 700 6300 401505 0004 MK 5 119 58 30 x 49 0.

02 3000 3000 401505 0006 4106 hardened version, 60 point angle ody die-forged, hardened and ground Projecting length ead Ø Moving point Ø x length Eccentricity Workpiece weight max. kg max.

15 ive centres thin version, 60 point angle due to the small casing diameter there is no support, tool holder or lathe tool in the way Projecting length ead Ø Moving point Ø x length Eccentricity Workpiece weight max. kg max. speed r/min MK x MK x MK 4 75, x MK x MK x slim version with extended running point, 60 point angle ody die-forged and ground Projecting length ead Ø Moving point Ø x length Eccentricity Workpiece weight max. kg max. speed r/min MK x MK x MK 4 88, x MK x MK x hardened version, 60 point angle ody die-forged, hardened and ground Projecting length ead Ø Moving point Ø x length Eccentricity Workpiece weight max. kg max. speed r/min MK 1 60, x MK x MK 3 79, x MK 4 102, x MK x MK x ive centres 60 point angle Extended running point perfect universal tip for use at manual lathes Eccentricity: max Tool fully hardened and ground earing arrangement for high axial forces Shaft sealing ring prevents the ingress of dirt and coolant C E F max. speed r/min Workpiece weight max. kg MK ,78 68,5 86,5 150, MK ,83 68,5 86,5 167, MK ,27 93,5 121, MK , MK ,40 93,5 121, MK , Ideally suited for bar stock with large diameters. ll prices in euro, VT excluded The extended running point guarantees the required clearance angle when turning parts with small diameters. Problem-free use for tubes with large diameters. Prices in bold print = delivery ex stock 40-15

Front face driver constant Operating range up to Ø160 Economical turning of workpieces along their entire length with high accuracy and without reclamping Modular principle: riving discs and centring

0004 MK 5 70 2,8 401560 0005 MK 6 70 4,4 401560 0006 4105 ase body for clamping in a lathe chuck shank Ø x length Enclosure Ø kg 25 x 110 85 2,3 401561 2511 4105 riving discs directly toothed Working

16 Front face driver constant Operating range up to Ø160 Economical turning of workpieces along their entire length with high accuracy and without reclamping Modular principle: riving discs and centring points can be exchanged universally also suitable for uneven front faces due to the hydraulic pressure compensation ase body with morse taper Enclosure Ø kg MK , MK , MK , MK , ase body for clamping in a lathe chuck shank Ø x length Enclosure Ø kg 25 x , riving discs directly toothed Working area 1 1 suitable centring point Ø Clockwise rotation nticlockwise rotation Clockwise and anticlockwise rotation , , riving discs with replaceable hard metal driving plates 6 x 3.2 Working area suitable centring point Ø Clockwise rotation nticlockwise rotation Clockwise and anticlockwise rotation , riving discs with replaceable hard metal driving plates 9.5 x 3.2 Working area 1 1 suitable centring point Ø Clockwise rotation nticlockwise rotation Clockwise and anticlockwise rotation Centring points ard metal driving plates Working area Clockwise or anticlockwise rotation Clockwise and anticlockwise rotation , ,5 3, Set in wooden box, operating range Ø base body 4 driving discs 13-24, 21-40, (directly toothed) (with exchangeable hard metal plates) 2 centring points, Ø 6 and Ø 12 escription Clockwise rotation nticlockwise rotation Complete set with base body MK Clockwise or anti-clockwise rotation Clockwise and anti-clockwise rotation

Universal lathe chuck made from cast iron CUSM system, centric clamping with cylindrical centre mount in accordance with I 6350 Made of fi ne-pored special casting for external and internal clamping

short taper are available on request ominal Ø F E R T J G O S K Rotational speed max.

160 140 125 7 42 62 23 3xM10 22 4 9 4500 0,04 405001 0160 405003 0160 200 176 160 7 55 76 29 3xM10 27,5 4 11 4000 0,06 405001 0200 405003 0200 250 224 200 7 76 82 33 3xM12 29,5 5 12 3500 0,06 405001

lathe chuck, ground Prices per set oring jaw ominal Ø 3 oring jaws 3 Turning jaws 4 oring jaws 4 Turning jaws 100 420199 1100 420199 2100 420199 4100 420199 5100 125 420199 1125 420199 2125 420199

17 Universal lathe chuck made from cast iron CUSM system, centric clamping with cylindrical centre mount in accordance with I 6350 Made of fi ne-pored special casting for external and internal clamping of workpieces supplied with: chuck key and fastening screws one set of boring jaws (outward stepped) one set of turning jaws (inward stepped) dditional chuck sizes as well as chucks with integrated short taper are available on request ominal Ø F E R T J G O S K Rotational speed max. r/min True running accuracy Three-jaw version Four-jaw version xM , xM , xM , xM10 27, , xM12 29, , xM , xM , Spare jaws for 3 and 4-jaw lathe chuck, ground Prices per set oring jaw ominal Ø 3 oring jaws 3 Turning jaws 4 oring jaws 4 Turning jaws Turning jaw Sliding jaws G with cross tenon ardened and ground Supplied with fastening screws Prices per set suitable for chuck size 1 P J Set of 3 jaws Set of 4 jaws , , , , , , , ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-17

Top jaws PW can be hardened Version with cross tenon Material C15 can be hardened Prices per set suitable for chuck size 1 1 Set of 3 jaws Set of 4 jaws 100 10 50 20 5,3 20 14 20 420160 7100 420161

18 Top jaws PW can be hardened Version with cross tenon Material C15 can be hardened Prices per set suitable for chuck size 1 1 Set of 3 jaws Set of 4 jaws , , , , , lock jaws MC can be hardened, sharpened Prices per set suitable for chuck size J P Set of 3 jaws Set of 4 jaws , ,9 5, , ,9 5, , ,1 7, , ,1 9, , ,1 9, ,4 11, , ,4 14, Flange for lathe chuck for I / I or I Fast steel machined on the machine side Chuck side plain faced Supplied with: Flange including fastening screw dditional cone sizes available on request suitable for chuck size Taper size E F G K I / I ,9 70, ,5 17, ,9 70, ,5 14, ,5 82, ,5 14, ,5 82, ,5 14, ,5 104,8 104,8 29,5 14, ,5 104,8 104,8 34,5 19, ,3 133,4 133,4 34,5 19, ,3 133,4 133,4 37,5 23, ,7 171,4 171,4 37,5 23, ,3 133,4 133,4 34,5 22, ,7 171,4 171,4 44,5 29, ,7 171,4 171,4 37,5 23, , ,5 29,

Universal lathe chuck made of high-quality steel die-forged, hardened and ground Plane spiral made of alloy steel, case-hardened and hardened, thread ground on both sides CUSM system, centric

jaws additional chuck sizes as well as chucks with short taper I 55029 (camlock mount) available on request Three-jaw chuck with cylindrical holding fixture according to I 6350 ll prices in euro, VT

19 Universal lathe chuck made of high-quality steel die-forged, hardened and ground Plane spiral made of alloy steel, case-hardened and hardened, thread ground on both sides CUSM system, centric clamping for external and internal clamping of workpieces for general turning tasks at conventional lathes Supplied with a chuck key, fastening screws and a set of hardened turning jaws and boring jaws additional chuck sizes as well as chucks with short taper I (camlock mount) available on request Three-jaw chuck with cylindrical holding fixture according to I 6350 ll prices in euro, VT excluded d h max. speed r/min kg Three-jaw power chuck with short taper fixture according to I Taper size F d h max. speed r/min kg , , , , , , , , , , , , , , , , , Four-jaw chuck with cylindrical holding fixture according to I 6350 F d h max. speed r/min kg Four-jaw power chuck with short taper fixture in accordance with I Taper size F d h max. speed r/min kg , , , , , , , , , , , , , , , Prices in bold print = delivery ex stock 40-19

20 Turning jaws Prices per set suitable for chuck size C Set of 3 jaws Set of 4 jaws oring jaws Prices per set suitable for chuck size C Set of 3 jaws Set of 4 jaws Sliding jaws G Supplied with screws Prices per set suitable for chuck size C Set of 3 jaws Set of 4 jaws , Top jaws Prices per set suitable for chuck size C Set of 3 jaws Set of 4 jaws , , , , , , , Mono-block jaw M Prices per set suitable for chuck size C Set of 3 jaws Set of 4 jaws

Key bar chucks URO-T with jaw safety mechanism, centric clamping higher clamping forces Stiff er chuck body (guaranteed accuracy at higher loads) Chuck body fully surface-hardened high jaw change

21 Key bar chucks URO-T with jaw safety mechanism, centric clamping higher clamping forces Stiff er chuck body (guaranteed accuracy at higher loads) Chuck body fully surface-hardened high jaw change repeatability Optimisation of wear parts (e.g. safety shut-off valve) True running and axial run-out tolerance twice as accurate as specifi ed by I accuracy class 1 Enhanced corrosion protection Compatible with sliding and top jaws from other manufacturers Supplied with safety key (as demanded by E 1550), set of reversible one-piece jaws or set of sliding jaws with reversible top jaws with cylindrical centre mount in accordance with I 6350 Ø range R T E 6 S F kg with reversible jaws Sliding and top jaws , with short taper fixture I Ø range R T Taper size argest taper Ø kg with reversible jaws Sliding and top jaws ,513 9, ,563 9, , , , , , , Reversible to jaw, hardened suitable for RÖM-URO, FORKRT-F and SCUK-ROT-S suitable for chuck size ole distance Step height Groove width ,5 20,4 32,5 32 7, ,5 24, , , Top jaw, unstepped, can be hardened suitable for RÖM-URO, FORKRT-F and SCUK-ROT-S suitable for chuck size ole distance Groove width Illustration ,2 35, CU CU , CU , CU kg h1 1 2 Type Sliding jaw, hardened suitable for RÖM-URO, FORKRT-F and SCUK-ROT-S suitable for chuck size ll prices in euro, VT excluded ole distance Groove width , MFG MFG MFG MFG Type Prices in bold print = delivery ex stock 40-21

22 one-piece block jaw, unstepped, can be hardened suitable for RÖM-URO, FORKRT-F and SCUK-ROT-S suitable for chuck size , , , , one-piece reversible jaw, hardened suitable for RÖM-URO, FORKRT-F and SCUK-ROT-S suitable for chuck size Step height , ,5 Three-level , Three-level Two-stage Two-stage Square face spanner Special steel ardened shank and ejector pin, tempered to a burnished tone Type Wr. width ateral shank length ead Ø length , Square ring wrench Special steel hardened, tempered to a burnished tone Wr. width ead Ø Square socket wrench Special steel ardened shank and ejector pin, tempered to a burnished tone Wr. width ateral shank length ead Ø length ,

Safety square key Special steel ardened shank and ejector pin, tempered to a burnished tone esigned to avoid being left

width length for chuck Ø 6 110 80-85 401571 0006 8 130 100-110 401571 0008 9 130 125-140 401571 0009 10 160 160 401571 0010 11 160

Workpiece stop PosiStop for three-jaw power chuck, for clamping short parts Material: luminium simple attachment at the lathe

workpieces Ø 15-130 Standard 15 421300 0015 20 421300 0020 25 421300 0025 30 421300 0030 35 421300 0035 4153 Set in wooden box

extension and special key for lathes For limiting lengths during serial and special-purpose production and releasing in the

23 Safety square key Special steel ardened shank and ejector pin, tempered to a burnished tone esigned to avoid being left accidentally in the lathe chuck Wr. width length for chuck Ø Workpiece stop PosiStop for three-jaw power chuck, for clamping short parts Material: luminium simple attachment at the lathe chuck due to three magnets ground supporting surfaces suitable for three-jaw power chuck with a jaw width of up to 55, for workpieces Ø Standard Set in wooden box Contents per set Each 1 workpiece stop = 15, 20, 25, 30, ollow spindle stopper Comprising clamping body, extension and special key for lathes For limiting lengths during serial and special-purpose production and releasing in the machine spindle using special key ll prices in euro, VT excluded range Prices in bold print = delivery ex stock 40-23

Wedge hook power chuck Model /T-200 with large clearance Solid steel design ardened and ground guides high true running accuracy ubrication nipple in every sliding jaw Recess mounting according to I

5 x 60, T-slot nuts, lining and jaw fastening screws, drawbar nuts without thread, special assembly wrench further sizes and models available on request rawbar nuts with tapped thread available on

actuating force k T-206 169 81 26 12 140 104,8 45 5,5 12 38 14,5 6000 14-169 11,5 M55 x 2 410110 0206 T-208 210 91 35 14 170 133,4 52 7,4 16 57,3 23,2 5000 14-210 21,3 M60 x 2 410110 0208 T-210 254

2 Jaw lift distance Piston stroke max. clamp force k max. actuating force k -204 110 59 23 10 85 70,6 26 5,4 10 28,5 14 8000 7-110 4 M32 x 1.

24 Wedge hook power chuck Model /T-200 with large clearance Solid steel design ardened and ground guides high true running accuracy ubrication nipple in every sliding jaw Recess mounting according to I 6353 Supplied without fl ange, without top jaws, with sliding jaw teeth 1.5 x 60, T-slot nuts, lining and jaw fastening screws, drawbar nuts without thread, special assembly wrench further sizes and models available on request rawbar nuts with tapped thread available on request 2-jaw version model Chuck Ø Jaw lift distance Piston stroke max. clamp force k max. actuating force k T ,8 45 5, , ,5 M55 x T ,4 52 7, ,3 23, ,3 M60 x T ,4 75 8, , ,5 M85 x T , , M100 x jaw version model Chuck Ø Jaw lift distance Piston stroke max. clamp force k max. actuating force k ,6 26 5, , M32 x ,6 33 5, , ,7 M40 x ,8 45 5, ,9 M55 x ,4 52 7, , ,3 M60 x ,4 75 8, ,5 M85 x , , ,3 M100 x Practical tip max. speed r/min max. speed r/min range range kg kg U max. U max. Secure clamping of a quadratic form with the help of soft clamping jaws on a two-jaw chuck

Wedge hook power chuck with enlarged Clearance Model with enlarged clearance Solid steel design ardened and ground guides high true running accuracy ubrication nipple in every sliding jaw Recess

5 x 60, T-slot nuts, lining and jaw fastening screws, drawbar nuts without thread, special assembly wrench rawbar nuts with tapped thread available on request model Chuck Ø 1 7 6 1 2 Jaw lift

chuck complete 206 170 81 31 12 140 104,8 53 5,5 12 58,5 20 6000 19-170 M60 x 2 420131 0060 208 210 91 35 14 170 133,4 66 7,4 16 99 32 5000 23-210 M75 x 2 420131 0080 210 254 100 40 16 220 171,5 81

25 Wedge hook power chuck with enlarged Clearance Model with enlarged clearance Solid steel design ardened and ground guides high true running accuracy ubrication nipple in every sliding jaw Recess mounting according to I 6353 Supplied without fl ange, without top jaws,with sliding jaw teeth 1.5 x 60, T-slot nuts, lining and jaw fastening screws, drawbar nuts without thread, special assembly wrench rawbar nuts with tapped thread available on request model Chuck Ø Jaw lift distance Piston stroke max. clamp force k max. actuating force k max. speed r/min range U max. chuck complete ,8 53 5, , M60 x ,4 66 7, M75 x ,5 81 8, M90 x , M115 x Power chuck with quick jaw change system Model QJR Quick jaw change system Solid steel design ardened and ground guides high true running accuracy centre mount in accordance with I and -200 series can be replaced by the QJR series Supplied with 2 sets of sliding jaws, without top jaws, without fl ange, drawbar nut without thread rawbar nuts with tapped thread available on request Power chuck model Chuck Ø ll prices in euro, VT excluded Jaw lift distance Piston stroke max. clamp force k max. actuating force k max. speed r/min range QJR ,4 66 7, M75 x QJR ,4 81 8, M90 x QJR , , M115 x Set of sliding jaws for chuck Ø U max. Prices in bold print = delivery ex stock 40-25

Flange for power chuck Precision fl ange featuring an all-steel design for chuck with centre mount in accordance with I 6353 Spindle sided version: Short taper in accordance with I 55026 and I 55021

2-jaw chuck for 3-jaw chuck for 4-jaw chuck 140 15 82,563 79,7 104,78 12 116-11 7 6,6 2 160/169 2-5 413010 1005 413001 1005 413100 1005 140 41 106,375 103 133,35 13,5 104,78 M10 20 24-1 160/169 2-6

2006 413001 2006 413100 2006 220 25 106,375 103 133,35 13,5 171,45 M16 20 13,5-1 254/304 2-6 413010 3006 413001 3006 413100 3006 220 18 139,719 136 171,45 17 190-14 10 9 4 254/304 2-8 413010 3008

26 Flange for power chuck Precision fl ange featuring an all-steel design for chuck with centre mount in accordance with I 6353 Spindle sided version: Short taper in accordance with I and I Compatible with the power chucks listed on the preceding pages Supplied without fl ange fastening screws irect chuck hold Indirect chuck hold C G J K M Illustration Chuck Ø Size spindle nose for 2-jaw chuck for 3-jaw chuck for 4-jaw chuck ,563 79,7 104, , / , ,35 13,5 104,78 M / ,563 79,7 104, ,35 M / , ,35 13, , / , ,35 13,5 171,45 M , / , , / , , M , , ubricant Pressure grease gun Chuck grease Contents 200 ml Contents 1 kg

Power-operated collect chuck Model CR Solid steel version hardened and precision-ground For multi-range and steel collets according to I 6343, 173 E and 185 E 2 sizes: Up to material Ø 42

tapped thread available on request model olding fi xtures U max. max. actuating force k max. clamp force k max. speed r/min kg CR-42, cyl. older CR-42, short taper CR-60, cyl.

5 25 55 7100 10 415010 0006 CR-60 cylindrical 138 148 M70 x 1.5 30 60 6300 14,2 415020 0001 CR-60/6 Short taper 138 160 M70 x 1.

5 30 60 6300 17,7 415030 0008 4114 4114 4114 4114 Power-operated collect chuck Model QCR quick collet change due to bayonet fixing for Ø 42 (173E) up to Ø 60 (185E), version up to Ø 80

thrust collar (without thread) without collets rawbar nuts with tapped thread available on request model olding fi xtures ll prices in euro, VT excluded U max. max. actuating force k max.

27 Power-operated collect chuck Model CR Solid steel version hardened and precision-ground For multi-range and steel collets according to I 6343, 173 E and 185 E 2 sizes: Up to material Ø 42 or up to material Ø 60 Other sizes for maximum material Ø 36, 54 and 66 available on request Prepared for the using a length stop, but can only be used in combination with multi-range collets. for bar work at CC lathes, especially for high speeds and true running accuracies Supplied with chuck fastening screws and thrust collar (without thread) without collets rawbar nuts with tapped thread available on request model olding fi xtures U max. max. actuating force k max. clamp force k max. speed r/min kg CR-42, cyl. older CR-42, short taper CR-60, cyl. older CR-60, short taper CR-42 cylindrical M55 x , CR-42/5 Short taper M55 x , CR-42/6 Short taper M55 x CR-60 cylindrical M70 x , CR-60/6 Short taper M70 x , CR-60/8 Short taper M70 x , Power-operated collect chuck Model QCR quick collet change due to bayonet fixing for Ø 42 (173E) up to Ø 60 (185E), version up to Ø 80 (193E) and Collet reduction from 185E to 173E available on request For bar work on CC lathes, especially for high speeds and true running accuracies Supplied with chuck fastening screws and thrust collar (without thread) without collets rawbar nuts with tapped thread available on request model olding fi xtures ll prices in euro, VT excluded U max. max. actuating force k max. clamp force k max. speed r/min kg QCR-42, Cyl. older QCR-42, Short taper QCR-60, Cyl. older Prices in bold print = delivery ex stock QCR-60, Short taper QCR-42 Cylindrical Ø M58 x , QCR-42/5 Short taper M58 x , QCR-42/6 Short taper M58 x , QCR-60 Cylindrical Ø M75 x QCR-60/6 Short taper M75 x QCR-60/8 Short taper M75 x

40-28 ead length collet ardened and ground True running accuracy: Ø 1-10 20 μm Ø 11-30 30 μm Ø 31-60 40 μm ridging maximum 0.

=60 1=50 2=48 =94 173E hexagon =60 1=50 2=48 =94 185E round =84 1=73 2=66 =110 185E square =84 1=73 2=66 =110 185E hexagon =84 1=73 2=66 =110 1 433035 0010 1,5 433035 0015 2 433035 0020 2,5 433035

28 40-28 ead length collet ardened and ground True running accuracy: Ø μm Ø μm Ø μm ridging maximum 0.1 of rated diameter Collets with longitudinal and transverse corrugation as well as a wide variety of multi-range collets designs available on request Clamp Ø 173E round =60 1=50 2=48 =94 173E square =60 1=50 2=48 =94 173E hexagon =60 1=50 2=48 =94 185E round =84 1=73 2=66 = E square =84 1=73 2=66 = E hexagon =84 1=73 2=66 = , , , , , , ,

29 Emergency push-type collet for turning inside diameters hardened and tempered to approx. 45 Rc and completely ground Can be clamped in the chuck by three removable alignment pins at the front and can be fi nished on the machine to the required bore diameter or to a stepped hole esignation 1 2 Ø 173 E Pre-drilled to Ø E Pre-drilled to Ø Internal stop for dead length collets according to I 6343 Collet shank is not deformed and clamping behaviour is not aff ected Can also be used as a limit stop for hollow parts Can be used for round, hexagon and square collets for collets 173 E E igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-29

Power-operated collect chuck Model P65 compact design igh precision Ideal use in initial machining due to axial tension Full compatibility with 65 clamping heads available on

Supplied without collets or switching equipment, includes blank unthreaded drawbar nut dditional chucks available on request rawbar nuts with tapped thread available on

65 model olding fi xtures P-65/5 Short taper 5 130 95 165 M70 x 2 415201 0005 P-65/6 Short taper 6 130 95 165 M85 x 2 415201 0006 P-65/8 Short taper 8 130 95 165 M85 x 2

Power-operated collect chuck Model KS compact design igh precision Ideal for use in initial machining due to axial tension Full compatibility with 42 and 65 clamping heads

30 Power-operated collect chuck Model P65 compact design igh precision Ideal use in initial machining due to axial tension Full compatibility with 65 clamping heads available on the market Easily adaptable to existing machinery P65 chucks are light and can be quickly fi tted. Supplied without collets or switching equipment, includes blank unthreaded drawbar nut dditional chucks available on request rawbar nuts with tapped thread available on request Clamp Ø max. 65 model olding fi xtures P-65/5 Short taper M70 x P-65/6 Short taper M85 x P-65/8 Short taper M85 x C U max. Power-operated collect chuck Model KS compact design igh precision Ideal for use in initial machining due to axial tension Full compatibility with 42 and 65 clamping heads available on the market Easily adaptable to existing machinery Supplied without collets or switching equipment, includes blank unthreaded drawbar nut dditional chucks available on request Clamp Ø max. 42 model olding fi xtures KS-42/5 Short taper M66 x KS-42/6 Short taper M66 x Clamp Ø max. 65 model olding fi xtures KS-65/5 Short taper M78 x KS-65/6 Short taper M78 x KS-65/8 Short taper M78 x C C U max. U max.

heads SP for all coon axial clamping systems at lathes and vices Tried and tested, exceptionally stable rubber-metallic compound high holding forces Version with crosswise grooves available on

31 heads SP for all coon axial clamping systems at lathes and vices Tried and tested, exceptionally stable rubber-metallic compound high holding forces Version with crosswise grooves available on request heads SP 42 Clamp Ø Smooth hole engthwise and crosswise grooves , , , , , , , , , , , , , , , , , , , Clamp Ø Smooth hole engthwise and crosswise grooves 23, , , , , , , , , , , , , , , , , , , igh quality for great performance. Multiple clamps by TOR: high-strength materials quick and exact clamping of multiple workpieces highest clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-31

32 heads SP 65 Clamp Ø Smooth hole engthwise and crosswise grooves , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Clamp Ø Smooth hole engthwise and crosswise grooves 35, , , , , , , , , , , , , , , , , , , , , , , , , , , ,.139,.139, , , , Manual changing fixture model MW MW

ydraulic cylinder with clearance Model S and S- in standard and long-stroke version Compact aluminium casing Safety non-return valves ensure the clamping pressure if the pressure drops in the

33 ydraulic cylinder with clearance Model S and S- in standard and long-stroke version Compact aluminium casing Safety non-return valves ensure the clamping pressure if the pressure drops in the hydraulic unit Pressure relief valves against pressure peaks in the piston chamber uilt-in fan for cooling the aluminium casing Rotary distributors with self-regulating sealing gap ensure trouble-free operation controlled oil leaks for lubricating the bearings of the rotary distributor prevent excessive temperatures Supplied including coolant collection dish, ready for direct mounting without cylinder flange model Standard cylinder ong-stroke cylinder S S-1246() S-1552() S-1875() S-2091() model Seal set S S-1246() S-1552() S-1875() S-2091() igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-33

34 Top jaws can be hardened Material C15 Price per set of 3 units luminium jaws available on request Teeth 1/16 x 90 Forkardt 3KT ; 3KT SMW utoblok -/- 125; - 130; G 125; - 130; KV 130; O 125 P-/PI- 130; SP 125 (from build year 98 onwards); STP 125 Röhm KF 130; KF 140; VE 125/160 erg KF 130 Type K+J Screw kg Illustration R M8 1, Fig. 1 Fig. 2 Teeth 1/16 x 90 Forkardt KG 160/175/200; KGF 160/175/200; KG 200; K 160; KC 200; KP 200; KS 160/200/250; KSF 175/200; KS 160/200; KSF 200; KSPS 160/200; KTG 160/200; KTGF 200; KT 160/175/200; KT 160/200; 160/175/200; F 160/175/200; QC 160/175/200; QC-KS 200; QC-S 160/200; QC-G 200; QK 160/175/200; QK-KS 200; UVE 160/200 SMW utoblock -/- 210; - 210; 210; -FC 210; C 200; G/FC 210; G 210; - 210; 220; 200; 200/220; FK/FKS 160/200; FK- 210; KV 160/200; KVG 160; KFMF 160/200; KFV 160/200; O 200; O 200/220; P-/PI- 210; RC- 210; 210 RC; SP200; STP 200 Röhm KF 160; KF-F 160; KF-F 160; KF 160; KF-F 160; KF-G 160; KF-C 160; SP 160; SPO 160 erg KF 160; KF 200; ES 160; ES 200; ESF 160; ESF 200; KFF 200 Schunk S 165; ROT C-O 160; T 165; TF 165 Type K+J Screw kg Illustration R M12 3, R M Teeth 1/16 x 90 Forkardt KG 200; KG 200; KGF 200; KC 200; KP 200; KS 200/250; KSF 200; KS 200; KSF 200/250; KSPS 200; KT 200; KTG 200; KTGF 200; KT 200; #KT 200; 200; F 200; QC 200; QC-KS 200/250; QC-S 160/200; QC-G 200; QK 200; QK-KS 200/250; UVE 200/250; F 250/290 (IEX) SMW utoblock -/- 210; - 210; 210; -FC 210; C 200; G/FC 210; G 210; - 210; 220; 200; 200/220/250 S; FK/FKS 160/200; FK- 210; Y-S 210/226; KV 200/250; KVG 200/250; KFMF 200; KFV 200; O 200; O 200/220/250 S; P-/PI- 210; RC- 210; 210 RC; SP200; STP 200 Röhm KF 200; KF-F 200; KF-E 200; KF-F 200; KF 200; KF-F 200; KF-G 200; KF-C 200; KF 250; VE 200; SP 215; SPO 215 erg KF 200; ES 200; ESF 200; KFF 200 Schunk S 210; ROT C- 200; ROT C-O 200; ROT CO 210; ROT COF 210; T 210; TF 210; TP 200 Type K+J Screw kg Illustration R M12 4, RE M12 2, R M12 2,

35 Teeth 1/16 x 90 Forkardt KG 250/315; K 250; KC 250/315; KP 250/315; KS 315/400; KS 250/315/400; KSF 250/315/400; KSPS 250/300; KT 250/315; KTG 250/315; KTGF 250/315; KT 250/315; 250/315; F 250/315; QC 250/315; QC-KS 315/400; QC-S 250/315; QC-G 250/315; QK 250/315; QK-KS 315/400; UVE 315; F 400 (IEX) SMW utoblok -/- 250/315; - 250/315; 250/315; -FC 250/315; C 250/315-65/315-85; G- 400; G/FC 250/305/400; G 250/315/400; - 250/315; 300; 250/315/400; 250/315/400; P-/PI- 250/315; FK/FKS 250/270/315; FK- 260/315; Y-S 250/315; KV 315/400; KVG 315/400; KFMF 250/315; KFV 250/315; O 250/315/400; O 250/315/400; 250 RC; 305 RC SP 250/315 (from build year 98 onwards); SP280/350; STP 280 Röhm KF 250/315; KF-F 250/315; KF-E 254/315; KF-F 250/315; KF 250/315; KF-F 250/315; KF-G 250/315; KF-C 250/315; KF 250/315; VE 250/305/315; SP 300; SPO 300 erg KF 250; KF Type K+J Screw kg Illustration R M16 9, RE M16 5, R M16 6, Teeth 3/32 x 90 Forkardt KG 400/500; K 400/500; KC 400/500; KP 400/500; KS 500/630; KS 500; KSF 630; KS 630; KS-PS 400 ; QC 400; QK 400; KTG 400/500/630; KTGF 400/500/630; KT 400/500/630; 400/500/630; F 400/500/630; UVE 400/500/630/800 SMW utoblok -/- 400; - 400/460/500 (from build year 98 onwards); -FC 500/630; G- 500/610/800; FK/FKS 400/500; FK- 400/500; I- 500/630/800; KV 500; KVG 500; KFV 400/500/630/800 Röhm KF 400/500/630/800; KF-E 400; KF-F 400/500/630; KF-S 400/500; KF 400/500; KF-F 400/500; KF-G 400/500; KF-C 400/500; KF 500/600; VE 400/500/630/800/1000 erg KF 400; KF 500; KF 630; ES 400; ES 500; ES 630; KFF 400; KFF 500; KFF 630 Schunk SG 400/500; S 400; ROT C- 400; ROT C-O 400; ROT CO 400; ROT COF 400; T 400/500; TF 400/500 Type K+J Screw kg Illustration R , M20 16, RE , M20 9, Top jaws can be hardened Material C15 Price per set of 3 units luminium jaws available on request Teeth 1/16 x 90 erg K 140, K 160 Type ll prices in euro, VT excluded K+J Screw kg Illustration CS M10 1, CS M10 1, Teeth 1/16 x 90 erg K 175, K 200 Type K+J Screw kg Illustration CS M12 3, CS M12 3, Teeth 1/16 x 90 erg K 250, K 315 Type K+J Screw kg Illustration CS M16 4, CS M16 6, Teeth 3/32 x erg K 400, K 500, K 630 Type K+J Screw kg Illustration CS M20 8, CS M20 13, Fig. 1 Prices in bold print = delivery ex stock 40-35

36 Top jaws can be hardened Material C15 Price per set of 3 units luminium jaws available on request Teeth 1/16 x 90 Röhm KF-S 130; KF-S 140 Schunk SG 140 Type K+J+E Screw kg I M6 0, Fig. 1 Teeth 1/16 x 90 Röhm KF-S 160; KF-S 175 Schunk SG 160 Type K+J Screw kg I M8 1, I M8 1, Teeth 1/16 x 90 Röhm KF-S 200 Schunk SG 200 Type K+J Screw kg I M12 3, Teeth 1/16 x 90 Röhm KF-S 250 Schunk SG 250 Type K+J Screw kg I M12 4, Teeth 1/16 x 90 Röhm KF-S 315 Schunk SG 315 Type K+J Screw kg I M

37 Top jaws can be hardened Material C15 Price per set of 3 units luminium jaws available on request Teeth 1.5 x 60 Forkardt QK 110 Kitagawa -204; -205; T-204; T-205, -04; -04 owa O1M4; O24M5 ison athe chucks Ø 100, Ø 125 Röhm KF-E 130; KF 105 Type K+J Screw kg Illustration R M8 0, K M8 0, Fig. 1 Fig. 2 Fig. 3 Teeth 1.5 x 60 Kitagawa -05 Type K+J Screw kg Illustration O M8 0, J M8 1, Teeth 1.5 x 60 Forkardt QC 160; QC 175; QC-KS 200; QC-S 160; QK 140; QK 160; QK 175 QK-KS 200 Kitagawa -206; -06; -206; -06; O-206;T-206; O-06; K-206; T-06; -206; -06 owa O7M6; O15M6; O22M6; O24M6; O27M6; O37M6; O47M6; O23M8 ison athe chucks Ø 160 Röhm KF-E170 SMW utoblok -M 165; -M 165; -M 165; M-FC 165; -M 165; P/PI-M165; -M 165; FK-M 165 Schunk S 165; ROT-C 165; ROT-CF 165; ROT-CK 165 Type K+J Screw Illustration kg Q M10 1, J M10 3, PT M10 1, Teeth 1.5 x 60 Forkardt QC 200; QC-KS 250; QC-S 200; QK 200; QK-KS 250 Kitagawa -208; -08; -208; -08; O-208; O-08K; T-08; -208; -08; T-208; QJR- 08 owa O7M8; O15M8; O-208 ison athe chucks Ø 200 Röhm KF-E 210 SMW utoblok -M 210; -M 210; -M 210; M-FC 210; -M 210; P/PI-M210; -M 210; FK-M 210 Schunk S 210; ROT-C 210; ROT-CF 210; ROT-CK 210 Type K+J Screw Illustration kg O M12 2, CK M12 2, J M PT M12 2, Teeth 1.5 x 60 Forkardt QC 250; QC-KS 315; QC-S 250; QK 250; QK-KS 315 Kitagawa -210; -10; -210; -10; T-210; O10K, T-10; T-10; -210; -210X; QJR-10 ison athe chucks Ø 250 Röhm KF-E 254 SMW utoblok -M 250; -M 250; -M 250; M-FC 250; -M 250; P/PI-M250; -M 250; FK-M 260 Schunk S 250; ROT-C 250; ROT-CF 250; ROT-CK 250 Type K+J Screw Illustration kg O M12 3, J M12 6, K M12 4, K M12 5, PT M12 4, ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-37

38 Teeth 1.5 x 60 Kitagawa -12; -12; O-12K; T-12 Schunk S 315; ROT-C 315; ROT-CF 315; ROT-CK 315 Type K+J Screw Illustration kg O M14 6, J M14 10, J M14 13, PT M14 7, Teeth 1.5 x 60 Forkardt QC (-S) 315; QC 400; QC-KS 400; QK 315; QK 400; QK-KS 250 Kitagawa -212; -212; T-212; -212; QJR-12 ison athe chucks Ø 315 Röhm KF-E 315; KFE 350; KFG 350; KFM 350; KF 350 SMW utoblok Type Teeth 3 x 60 Kitagawa -21; -24; -21; -24 ison athe chucks Ø 500, Ø 630 Type -M 315; -M 315; -M 315; M-FC 315; -M 315; P/PI-M315; -M 315; FK-M 315; G-M 400 K+J Screw kg Illustration O M20 16, K+J Screw kg Illustration R M16 6, J M16 10, PT M16 7, Teeth 1.5 x 60 Kitagawa -15; -18; O-15K ison athe chuck Ø 400 Schunk ROT-C 400; ROT-CF 400 Type K+J Screw kg Illustration O M20 15, J M Top jaws can be hardened, with cross tenon Material C15 Price per set of 3 units erg KC 160; KC 185 Forkardt F 160; F+ 160; FC 175; KTC 160; KTCV 160; KTCV 175 Kitagawa QJ 306 Röhm URO 160; URO-C 160; URO-C 175; URO-CE 160 SMW utoblok G-F 160; G- 160; G 160; KCS- 170; KCS 160; KCS 175; KSP 160; RMG 160 Schunk ROT-G 160; ROT C-W 185; ROT-S plus 160; ROT-S 160; TW 165-R Type 1 2 J a S kg Illustration P , erg KC 200 Forkardt F 200; F+ 200; FC 200; KTC 200; KTCV 200 Kitagawa QJ 308 Röhm URO 200; URO-C 200; URO-CE 200 SMW utoblok G-F 210; G- 210; G 200; KCS- 210; KCS- 225; KCS- 210; KCS 200; KCS 210; KSP 200; RMG 200 Schunk ROT-G 200; ROT C-W 225; ROT-S plus 200; ROT-S 200; ROT C-WF 210; TW 210-F; TW 210-R; TW 210 Type 1 2 J a S kg Illustration CU CU , P ,

39 erg KC 250; KC 315 Forkardt F 250; F+ 250; FC 250; FC 315; KTC 250; KTC 265; KTC 280; KTC 315; KTCV 250; KTCV 315; UC 250; UC 315 Kitagawa QJ 310; QJ 312 Röhm URO 250; URO-C 250; URO-CE 250; URO-CE 315 SMW utoblok G-F 260; G- 260; G- 315; G 250; G 315; KCS- 260; KCS- 315; KCS- 260; KCS- 315; KCS 250; KCS 260; KCS 315; RMG 250 Schunk ROT-G 250; ROT-G 315; ROT C-W 265; ROT C-W 315; ROT-S plus 250; ROT-S 250; ROT C-WF 250; ROT C-WF 315; TW 250-F; TW 250-R; TW 265-F; TW 265-R; TW 315-R; TW 265 Type 1 2 J a S kg Illustration CU , CU , CU , erg KC 400 Forkardt F 315; F+ 315; FC 400; KTC 360; KTC 400; KTCV 400; UC 400 Kitagawa QJ 15 Röhm URO 315; URO-C 315; URO-CE 400 SMW utoblok G-F 315; G- 400; G 400; KCS- 400; KCS- 400; KCS 400; RMG 315 Schunk ROT-G 400; ROT C-W 400; ROT-S plus 315; ROT-S 315; TW 315-F; TW 400-F; TW 400-R; TW 315 Type 2 1 J a S kg Illustration CU , CU , erg KC 500 Forkardt F 400; F+ 400; F 500; F+ 500; FC 500; FC 630; KTC 500; KTC 630; KTCV 500; KTCV 630; UC 500 Kitagawa QJ 21; QJ 24 Röhm URO 400; URO 500; URO-C 400; URO-C 500; URO-CE 500 SMW utoblok G-F 400; G-F 500; G- 500; G- 630; G 500; G 630; KCS- 500; KCS- 630; KCS- 500; KCS- 630; KCS- 800; KCS 500; KCS 630 Schunk ROT-G 500; ROT-S plus 400;; ROT-S plus 500; ROT S 400; ROT S 500; TW 500-F; TW 500-R; TW 630-R; TW 400 Type 1 2 J a S kg Illustration CU , CU , P , lock jaws can be hardened suitable for Röhm lathe chucks ZG-ZS, ZGU-ZSU, ZG Material C15 Price per set of 3 units Type for chuck Ø ll prices in euro, VT excluded J kg E , , E , , E , , E , , E / 350 / , , Prices in bold print = delivery ex stock 40-39

40 Top jaws can be hardened, with cross tenon compatible with Röhm lathe chucks ZG-ZS, ZGU-ZSU, ZG, UGU, USU, ZGF Material C15 Price per set of 3 units Type for chuck Ø 1 J a S kg M /110 22, ,94 21,25 9,5 0, M , ,94 23,72 12,7 0, M ,94 23,8 12,7 1, M / ,94 33,3 12,7 2, M ,7 37,3 19 4, M ,7 44, M / , , Sliding jaws hardened compatible with Röhm lathe chucks ZG-ZS, ZGU-ZSU, ZG, UGU, USU, ZGF Including cheese-head screws I Material 16 MnCr 5 Price per set of 3 units Type for chuck Ø J S kg PG / , ,5 7,94 0, PG ,68 7,94 0, PG / ,1 12,68 7,94 0, PG ,5 12,68 7,94 0, PG ,03 12,7 1, PG ,5 19,03 12,7 2, PG / ,03 12, Reversible top jaws hardened Material 16 MnCr 5 Price per set of 3 units Teeth 1.5 x 60 Kitagawa -204; -205 ison lathe chucks Ø 100, Ø 125 Type for chuck Ø T J Screw kg Illustration GT / M8 0, Fig. 2 Teeth 1.5 x 60 Kitagawa -06; -206; -06; O-206; O-06K; -206 ison athe chucks Ø 160 Type for chuck Ø T J Screw kg Illustration GT M

41 Teeth 1.5 x 60 Kitagawa -08; -208; O-208; -208, -08; -08; G ; -208 ison athe chucks Ø 200 Type for chuck Ø T J+E Screw Illustration kg GT M12 1, Fig. 1 Teeth 1.5 x 60 Kitagawa -10; -210; O-10K; -210; -210X; -10; G ; -210 ison athe chucks Ø 250 Type for chuck Ø T J+E Screw Illustration kg GT M12 2, Teeth 1.5 x 60 Kitagawa -212; -212; -212 ison athe chucks Ø 315 Type for chuck Ø T J Screw kg Illustration GT M16 3, Fig. 2 Teeth 1.5 x 60 Kitagawa -15; -18; O-15K ison athe chucks Ø 400 Type for chuck Ø T J+E Screw kg Illustration GT / M Gripper jaw pads hardened Material 16 MnCr 5 Price per set of 3 units pplication: Outer clamping Teeth 1.5 x 60 Kitagawa -206 ison athe chucks Ø 160 Type range J T G kg M6 1, M6 1, M6 1, M6 1, Teeth 1.5 x 60 Kitagawa -208 ison athe chucks Ø 200 Type range ll prices in euro, VT excluded J T G kg M6 1, M6 1, M6 1, M6 1, Prices in bold print = delivery ex stock 40-41

42 Teeth 1.5 x 60 Kitagawa -210 ison athe chucks Ø 250 Type range J T G kg C M8 2, C M8 2, C M8 2, C M8 2, Teeth 1.5 x 60 Kitagawa -212 ison athe chucks Ø 315 Type range J T G kg E M8 4, E M8 3, E M E M8 3, Support bolts soft, for gripper jaws Wrench size: M6=10, M8=13 Price per set of 3 units M6 thread M8 thread Sliding jaws ardened, with modular helical gearing Including cheese-head screws I Material 16 MnCr 5 Price per set of 3 units Forkardt F 400; F+400; F 500 ; UC 500; KTC 500; KTC 630; KTCV 500; KTCV 630; FC 500; FC 630 Röhm uro 400; uro 500; uro-c 400; uro-c 500; uro-ce 500 Schunk TW 500 F; Rota-S 400; Rota-S 500; Rota-S plus 400; Rota-S plus 500 SMW G-F 400; G-F 500 Type MFG M16 x 1,5 x S J Screw 40-42

43 Slot nuts compatible with jaws with imperial pointed toothing Including cheese-head screws I Prices per set Forkardt Geiger + aag 2E-PS 160/200; 2EF 200; KG 160/175/200; KGF 160/175/200; KG 200; K 160/200; KC 200; KP 200; KS 160/200/250; KSF 175/200; KS 160/200; KSF 200/250; KSPS 160/200; KT 160/200; KTG 160/200; KTGF 200; KT 160/175/200; KT 160/200; 160/175/200; F 160/175/200; QC 160/175/200; QC-KS 200/250; QC-S 160/200 QC-G 200; QK 160/175/200; QK-KS 200/250; UVE 160/200/250; F 250/290 (IEX); K 250 (MO); KS 250 (MO); KSF 250 (MO) GS 160/200; GKS 160/200; G 160/200; G 250 (MO); G 160/200/250; GF 200/250; GKS 250 ofmann KC 160/200; K 160/200/250 SMW utoblok FK 160/200; FKS 160/200; KV 160/200/250; KVG 160/200/250; KFV 160/200; KFMF 160/200 Schunk S 165/210; ROT C 165 (until end of 2000); ROT C 210 (bis Ende 2000); ROT C- 200; ROT C-F 165 (until end of 2000); ROT C-F 210 (until end of 2000); ROT C-O 160/200; T 165/210; TF 165/210 Type h J G Cyl. Screws I 912 Illustration Contents per set GG M12 M12 x GG M12 M12 x G M12 M12 x Fig. 1 Fig. 2 Fig. 3 Forkardt 2E 200; 2 200; KG 250/315; K 250; KC 250/315; KP 250/315; KS 315/400; KS 250/315/400; KSF 250/315/400; KSPS 250/300; KT 250/315; KTG 250/315; KTGF 250/315; KT 250/315; 250/257/290/315; F 250/315; QC 250/315; QC-KS 315/400; QC-S 250/315; QC-G 250/315; QK 250/315; QK-KS 315/400; UVE 315; F 400 (IEX); 2E 250 (MO) Geiger + aag GS 250/315; GSK 315; G 250/280; G 280; GSP 300; GSP 300; GG215/250/300; GV ; GE 200/250/315; GE 250 (MO) ofmann 2 200; KC 250/315/400; K 315/400 SMW utoblok FK 250/270/315; FKS 250/315; KV 315/400; KVG 315/400; KFV 250/315; KFMF 250/315; KZF 200; KZF-ES 200 Schunk SG 315;S 250/315; ROT C 250 (until end of 2000); ROT C- 250/315; ROT C-F 250 (until end of 2000); ROT C-F 315; ROT C-O 250/315; T 250/315; TF 250/315 Type h J G Cyl. Screws I 912 Illustration Contents per set GG M16 M16 x GG M16 M16 x G 21/ /17 M16 M16 x G M16 M16 x Forkardt 2E 250/315/400/500; 2E-PS 300/315/400/500; KG 400/500; K 300/400/500; KC 400/500; KP 400/500; KS 500/630; KS 500; KSF 560/630; KS 630; KS-PS 400; KTG 400/500/630; KTGF 400/500/630; KT 400/500/630; 400/500/630; F 400/500/630; QC 400; QK 400; UVE 400/500/630/800 Geiger + aag GE250/ 315 ofmann 2 250/315/400; KC 500; K 500 SWW utoblock FK 400/500; FKS 400/500; KV 500; KVG 500; KS 630; KFV 400/500/630/800; KZF 250/315/400; KZF-ES 315/400 Schunk S 400; ROT C 400/500; ROT C- 400; ROT C-F 400/500; ROT C-O 400; T 400/500; TF 400/500 Type ll prices in euro, VT excluded h J Cyl. Screws I 912 Illustration Contents per set GG ,5 35 M20 x G ,5 M20 x Prices in bold print = delivery ex stock 40-43

44 Slot nuts for Röhm, Schunk chucks Including cheese-head screws I Prices per set Röhm KF-S 160/175; KF-E 170; VE 125/160 Schunk SG 160; ROT C- 160 Type h J G Cyl. Screws I 912 Illustration X , x15 M8 M8 x Röhm KF 160/200; KF-E 160/200/210; KF-F 160/200; KF 160/200; KF 250; KF-S 200; VE 200; SP 160/215; SPO 160/215 Schunk SG 200; SG 250 Type h J G Cyl. Screws I 912 Illustration Contents per set Contents per set G 16 21, M12 M12 x GE 16 21, M12 M12 x Röhm Type KF 200/2; KF 250/315; KF-E 254/315; KF-F 250/315; KF 250/315; KF 315/400; VE 250/315; SP 300; SPO 300; KF-S 315 h G Cyl. Screws I 912 Illustration Contents per set GE 25 25, M16 M16 x Röhm KF 250/315; KF 400/500/630/800; KF-E 400/500/630/800; KF-F 400/500/630; KF-S 400/500; KF 400/500; KF 500/600; VE 400/500/630/800/1000 Schunk SG 400/500 Type h G Cyl. Screws I 912 Illustration Contents per set GE 40 33,7 15,5 25,5 M20 M20 x Fig. 1 Fig. 2 Slot nuts For SMW utoblock chuck types Including cheese-head screws I Unit prices SMW utoblok G 210; G-FC 210; 200; 200; 200; I 200; I 200; O 200 Type h G Cyl. Screws I 912 GF M12 M12 x Fig. 1 Slot nuts for chuck types: Kitagawa, owa and Schunk Including cheese-head screws I Price per set of 3 units Kitagawa 204; 205; T-204; T-205 owa 01M4; 024M5 ison athe chucks Ø 100, Ø 125 Type h J G Cyl. Screws I 912 GP , M8 M8 x Fig. 2 owa Type M4; 027M5 h J G Cyl. Screws I 912 GR 04 16,5 6, M8 M8 x

45 Kitagawa S 165; 106; J5-6; 06; O 6; O 160; OS 6; 160 owa 01M6; 015M6; 024M6; 047M6; 07M6; 022M6; 027M6; 023M8; 037M6 Schunk S 165 (1.5 x 60 ); ROT C 165 (1.5 x 60 ); ROT CF 165 (1.5 x 60 ) Type h J G Cyl. Screws I 912 GP M10 M10 x Kitagawa 206; -206; 206; W-08; O 206 Schunk ROT CK 165 ison athe chucks Ø 160 Type h J G Cyl. Screws I 912 GP 07 18,5 7, M10 M10 x Kitagawa S 210; 08; 200; J6-8; O 8; O 8; O 08K; OS 8; 200; 8 owa 01M8; 07M8; 02M8; 015M8 Schunk S 210 (1.5 x 60 ); ROT C 210 (1.5 x 60 ); ROT CF 210 (1.5 x 60 ) Type h J G Cyl. Screws I 912 GP M12 M12 x Kitagawa 208; -208; T-208; O 208 Schunk ROT CK 210 ison athe chucks Ø 200 Type h J G Cyl. Screws I 912 GP 09 20,5 8, M12 M12 x Kitagawa S 250; 10; 250; G ; J8-10; O 10; O 10; O 10; O 250; OS 10; 280 owa 01M10; 02M10 Schunk S 250 (1.5 x 60 ); ROT C 250 (1.5 x 60 ); ROT CF 250 (1.5 x 60 ) Type h J G Cyl. Screws I 912 GP M12 M12 x Kitagawa 210; -210; T-210 Schunk ROT CK 250 ison athe chucks Ø 250 Type h J G Cyl. Screws I 912 GP 11 21,5 8, M12 M12 x Kitagawa -12; -12; -12; T-12; T-12; T-12 OW O1M12; O2M12 Schunk S-315 (1.5x60 ); ROT C-315 (1.5x60 ); ROT CF-315 (1.5x60 ) Type h J G Cyl. Screws I 912 GP , M14 M14 x Kitagawa 212; 212; T 212 Schunk ROT CK 315 ison athe chucks Ø 315 Type h J G Cyl. Screws I 912 GP , M16 M16 x Kitagawa 15; 18; T-15 Schunk S 400 (3 x 60 ); ROT C 400 (1.5 x 60 ); ROT CF 400 (1.5 x 60 ) ison athe chucks Ø 400 Type ll prices in euro, VT excluded h J G Cyl. Screws I 912 GP 15 45,5 16,5 24/22 43 M20 M20 x Prices in bold print = delivery ex stock 40-45

46 T-slot bolts for chuck type: erg K Unit prices Type Chuck Ø h G /160 20, M G /200 23, M G /315 26, M G /500 32, M T-slot nuts for chuck type: erg K Unit prices Thread Type Chuck Ø Thread Wr. width GC / M GC / M12 17, GC 16S 250/ M16 24, GC / M igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools

47 designs For milling machines and machining centres IFO Morse taper I 228 shape (conical shank with clamping thread) MT G M M M M M M24 Steep taper shanks, I 2080 part 1 shape ST d1 a b k G d2 d3 d4 l1 l2 l3 l4 l M M M Steep-taper shanks I part 1 shame or shape with internal coolant supply ST G d1 d2max d3 d5 l1 l2 l3 l4 l5 l6 l7 a 30 M M M Steep-taper shanks I part 1 shape, with coolant supply via the collar ST G d1 d2max d3 d5 d6 l1 l2 l3 l4 l5 l6 l7 a e b 30 M M M Steep-taper shanks MS 403 T ST G d1 d3 d5 l1 l2 l3 l5 l6 a b 30 M M M ollow taper shank I shape (SK-) with internal coolant supply SK b2 b3 d2 d4 d5 d6 d9 f1 f2 f3 l1 h The different forms of hollow-taper shanks I (SK) Shape - utomatic tool switching - Central coolant supply - dditional T, a slot in the taper is a tighter fit Shape - s shape, but with enlarged collar Shape C - Central coolant supply - without gripper groove Shape - s shape C, but with additional coolant supply via the collar Shape E Shape F - For SC machining - Central coolant supply - without carrier grooves, with gripper groove - s shape E, but with enlarged collar ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-47

Mounting aid With steep-angle taper holding fi xture luminium assembly block Carrier block: alloyed and case-hardened steel EW UOVO Y Can be used

180 99 155 438049 0050 4117 O U VEU UEVO Can be used horizontally and vertically Rotatable Steel housing Support bracket rotatable in 45 intervals in two

UEVO EW UOVO Y Universal assembly aid for SK40, T40, SK63 and Polygon EPS63 Rotatable Steel housing Connected using roller bearings to collar without taper

130 64 160 438056 4063 4117 O U VEU UEVO Can be used horizontally and vertically With four magnets to horizontally support the holder on-damaging fi tting

48 Mounting aid With steep-angle taper holding fi xture luminium assembly block Carrier block: alloyed and case-hardened steel EW UOVO Y Can be used horizontally and vertically With steep-angle taper holding fi xture luminium assembly block Secured against falling out SK SK O U VEU UEVO Can be used horizontally and vertically Rotatable Steel housing Support bracket rotatable in 45 intervals in two directions Secured against falling out ttachment holes on the underside SK SK EW O U VEU UOVO Y UEVO EW UOVO Y Universal assembly aid for SK40, T40, SK63 and Polygon EPS63 Rotatable Steel housing Connected using roller bearings to collar without taper contact Support bracket rotatable in 45 intervals in two directions Secured against falling out ttachment holes on the underside SK40 / T40 / SK63 / EPS O U VEU UEVO Can be used horizontally and vertically With four magnets to horizontally support the holder on-damaging fi tting and removal thanks to fi bre-reinforced polyamide material igh stability due to new material design Can be fi tted onto a workbench SK

49 OZ collet chuck for collets I 6388 alloyed case-hardened steel with tensile strength at core of min. 950 / 2, case hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 in accordance with I 7187 and I 2080, max. true running accuracy < Supplied with clamping nuts dditional shank designs and / versions available on request I 2080 range for collets SK E / 415E SK E / 462E SK E / 467E SK E / 462E SK E / 467E I (internal coolant supply) range for collets SK E / 415E SK E / 415E SK E / 462E SK E / 462E SK E / 467E SK E / 462E SK E / 467E SK E / 467E MS 403 T (internal coolant supply) range for collets SK E / 415E SK E / 462E SK E / 467E SK E / 462E SK E / 467E I type (SK-) (internal coolant supply) range for collets SK E / 415E SK E / 462E SK E / 415E SK E / 462E SK E / 467E SK E / 415E SK E / 462E SK E / 467E igh quality for great performance. Tool carts by TOR: highly resilient materials extremely flexible compartments will not topple over even when drawers are open easy in and out of the drawers drawer stop to prevent simultaneous opening of more than one drawer This is but one example of TOR s high-quality workshop furnishings. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-49

50 OZ collets particularly elastic, double slotted version igher percentage of contact area, greater rigidity and holding forces, greater system concentricity Collapse 0.5 For clamping tools and twist drills on the chamfer True running accuracy: 415E: 6 μm 462E: 6 μm 467E: 10 μm Clamp Ø 415E 462E 467E , , , , , , , , , , , , , , OZ clamping nuts for collets in accordance with I 6388 (OZ) with ball bearing mounted pressure ring For higher holding forces and better concentricity characteristics suitable for range 410E M33 x E M48 x E ,5 M60 x Thread

51 ER collet chucks for collets I 6499 ER alloyed case-hardened steel with tensile strength at core of min. 950 /², case hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 in accordance with I 7187 and I 2080, max. true running accuracy < Supplied with clamping nuts dditional shank designs and / version available on request I 2080 range for collets SK ER16 / 426E SK ER25 / 430E SK ER32 / 470E SK ER40 / 472E SK ER32 / 470E SK ER40 / 472E I (internal coolant supply) range for collets SK ER16 / 426E SK ER16 / 426E SK ER16 / 426E SK ER25 / 430E SK ER25 / 430E SK ER25 / 430E SK ER32 / 470E SK ER32 / 470E SK ER32 / 470E SK ER40 / 472E SK ER40 / 472E SK ER40 / 472E SK ER16 / 426E SK ER16 / 426E SK ER25 / 430E SK ER25 / 430E SK ER25 / 430E SK ER32 / 470E SK ER32 / 470E SK ER32 / 470E SK ER40 / 472E SK ER40 / 472E SK ER40 / 472E MS 403 T (internal coolant supply) range ll prices in euro, VT excluded for collets SK ER16 / 426E SK ER16 / 426E SK ER25 / 430E SK ER25 / 430E SK ER32 / 470E SK ER32 / 470E SK ER40 / 472E SK ER40 / 472E SK ER25 / 230E SK ER32 / 470E SK ER40 / 472E Prices in bold print = delivery ex stock 40-51

52 I type (SK-) (internal coolant supply) range for collets SK ER16 / 426E SK ER25 / 430E SK ER32 / 470E SK ER16 / 426E SK ER16 / 426E SK ER25 / 430E SK ER25 / 430E SK ER32 / 470E SK ER32 / 470E SK ER25 / 430E SK ER32 / 470E SK ER40 / 472E SK ER40 / 472E Polygon shank EPS ISO range for collets EPS ER16 / 426E EPS ER16 / 426E EPS ER25 / 430E EPS ER25 / 430E EPS ER32 / 470E EPS ER32 / 470E EPS ER40 / 472E EPS ER40 / 472E with cylindrical shank range 1 1 for collets 1, ER , ER ER ER ER ER ER ER ER ER ER collet chucks for collets I 6499 ER alloyed case-hardened steel with tensile strength at core of min. 950 / 2, case hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2 nickel-plated Pre-balanced G 2.5/25,000 rpm with alluffchip bore Taper angle tolerance quality < T3 in accordance with I 7187 and I 2080, max. true running accuracy < Supplied with clamping nuts nickel-plated and pre-balanced G 2.5 / 25,000 rpm I Internal coolant supply range for collets SK ER SK ER SK ER SK ER SK ER SK ER SK ER SK ER SK ER SK ER SK ER SK ER

I 69893 type (SK-) Internal coolant supply range for collets SK 63 1-10 ER16 100 32 431119 6310 SK 63 1-10 ER16 160 32 431119 6410 SK 63 2-16 ER25 100 42 431119 6316 SK 63 2-16 ER25 160 42 431119

collets I 6499, increasing in intervals of 1 ER collet chucks I 69871 SK 40 alloyed case-hardened steel with tensile strength at the core of min.

53 I type (SK-) Internal coolant supply range for collets SK ER SK ER SK ER SK ER SK ER SK ER SK ER SK ER , ER collet chuck set I SK40 ER collets I 6499, increasing in intervals of 1 ER collet chucks I SK 40 alloyed case-hardened steel with tensile strength at the core of min. 950 / 2, case hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < Supplied in plastic case with clamping key and clamping nut Contents per set Collet range 17-piece ER piece ER ER collet chuck extension Mini hardened (58-60 Rc) and precision-ground True running accuracy of straight shank to internal taper max. 5 μm, taper angle tolerance quality T3 Supplied with clamping and removal nuts range for collets 0,5-10 ER ,5-10 ER ,5-13 ER ,5-13 ER ,5-7 ER Kit With collet chuck extension, collets, clamping nuts, wrench range Collet umber of collets 0,5-7 ER ,5-10 ER ,5-10 ER ,5-13 ER ,5-13 ER ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-53

54 GER collets 5 μm Collapse of 1 (for clamping diameter 1 to 2 : 0.5 ) True running accuracy 5μm Clamp Ø ER16 / 426E =17 =27,5 ER20 428E =21 =31,5 ER25 430E =26 =34 ER32 470E =33 =40 ER40 472E =41 = , , ,40 1, , , , , , , ,70 2, , , , , , , , , , 3, , , , , , , , , , 4, , , , , , , , , , 5, , , , , , , , , , 6, , , , , , , , , , 7, , , , , , , , , 8, , , , , , , , , , 9, , , , , , , , , 10, , , , , , , , 11, , , , , , , 12, , , , , , , 13, , , , , , 14, , , , , , 15, , , , , , , , , , , , , , , , , , Set in wooden box, increasing at intervals of 1 esignation Contents per set range GER E 10-part GER E 12-part GER E 15-part GER E 18-part GER E 23-part ER collets Shape with square Page

ER collets 8 μm Collapse of 1 (for ER11 and for clamping diameter 1 to 2 : 0.5 ) True running accuracy 8 μm Ø ER11 4008E =11.5 =18 ER16 426E =17 =27.5 ER20 428E =21 =31.

55 ER collets 8 μm Collapse of 1 (for ER11 and for clamping diameter 1 to 2 : 0.5 ) True running accuracy 8 μm Ø ER E =11.5 =18 ER16 426E =17 =27.5 ER20 428E =21 =31.5 ER25 430E =26 =34 ER32 470E =33 =40 ER40 472E =41 = , , , , , , Set on wooden stand ER11 = increasing in intervals of 0.5, ER16-ER40 = increasing in intervals of 1 esignation Contents per set range ER E 13-part ER16 426E 10-part ER20 428E 12-part ER25 430E 15-part ER32 470E 18-part ER40 472E 24-part igh quality for great performance. TOR s taps: highest cutting speeds precision-ground for safest machining ISO colour codes for easy identification of the correct tool This is but one example of TOR s high-quality drilling tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-55

ER clamping nuts for collets in accordance with I 6499 (ER/ESX) case-hardened and ground, suitable for increased speeds Versions: Mini nuts 50-54 Rc, ground on all sides, small dimensions standard

50% higher clamping forces type P 56-60 Rc, pre-balanced, for holding P sealing washers, operating pressure up to 80 bar Mini nuts suitable for Tightening torque max. Rotational speed max.

Rotational speed max. r/min ER 16 50 10000 32 17 M22 x 1.5 431010 0016 ER 20 75 10000 35 18,5 M25 x 1.5 431010 0020 ER 25 85 10000 42 20 M32 x 1.5 431010 0025 ER 32 105 10000 50 22,5 M40 x 1.

56 ER clamping nuts for collets in accordance with I 6499 (ER/ESX) case-hardened and ground, suitable for increased speeds Versions: Mini nuts Rc, ground on all sides, small dimensions standard Rc, pre-balanced type Rc, pre-balanced, special heat treatment, thus approx. 50% higher clamping forces type P Rc, pre-balanced, for holding P sealing washers, operating pressure up to 80 bar Mini nuts suitable for Tightening torque max. Rotational speed max. r/min ER M13 x ER M19 x ER M24 x Thread Standard suitable for Tightening torque max. Rotational speed max. r/min ER M22 x ER ,5 M25 x ER M32 x ER ,5 M40 x ER ,5 M50 x Type approx. 50% higher clamping force than the standard version suitable for Tightening torque max. Rotational speed max. r/min ER M22 x ER M25 x ER M32 x ER M40 x ER M50 x Thread Thread Type for sealing washers suitable for Tightening torque max. Rotational speed max. r/min ER M22 x ER ,7 M32 x ER M40 x ER ,7 M50 x Thread igh quality for great performance. Solid carbide high-performance twist drills by TOR: solid carbide Ultra-finest grit longest service life innovative centring geometry internal coolant flew precision-ground for safest machining This is but one example of TOR s high-quality drilling tools

Sealing washers for ER collet chucks For ER clamping nuts 431019... For Fahrion clamping nuts Centro-P (PC-I) 431237... For SR precision ER clamping nuts (for sealing washers) 431247... ridging range 0.

57 Sealing washers for ER collet chucks For ER clamping nuts For Fahrion clamping nuts Centro-P (PC-I) For SR precision ER clamping nuts (for sealing washers) ridging range 0.1 / for collets Ø P 16 i =12.6 =2 P 25 i =20.2 =2 P 32 i =26.2 =2 P 40 i =34.2 = , , , , , , , , , , , , , , igh quality for great performance. ial indicators by TOR: best manufacturing quality maximum precision long service life This is but one example of TOR s high-quality measuring tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-57

58 Precision ER collet chuck Extremely high concentricity and precision of 3 μm for collets I 6499 GER Pre-balanced G 2.5/20,000 rpm Up to 25% greater holding forces compared with conventional collet chucks Sealed up to 100 bar when using nuts with sealing washers (page 40 55) Supplied without clamping nuts and chuck key, please order separately! True running accuracy 3μm I Internal coolant supply range for collets SK GER SK GER SK GER SK GER SK GER SK GER SK GER SK GER SK GER SK GER SK GER I SK- Internal coolant supply range for collets SK GER SK GER SK GER SK GER SK GER SK GER nuts esign for collets Ø For sealing washers GER For sealing washers GER For sealing washers GER Standard GER Standard GER Standard GER For suitable precision collets, see page For suitable roller wrenches, see page

59 Precision ER collet chuck CETRO-P 30 trapezoidal thread with ground, extra long double-length guide compared to 60 V-thread of conventional collet chucks Reduces friction when tightening nuts Exact centring of the nut resulting in minimal imbalance Up to 100% greater holding forces compared with conventional collet chucks Extremely high concentricity and precision of 3 μm Pre-balanced G 2.5/25,000 rpm Fully suitable for dry processes and hard milling Insensitive to temperature fl uctuations up to 200 can be used up to 80 bar, cooling possible along the cutting edge Sealing washers page True running accuracy 3μm Supplied without clamping nuts and chuck key, please order separately! slim and conical versions available on request I (internal coolant supply) range for collets SK ER25 / 430E-P / SK ER32 / 470E-P / SK ER16 / 426E-P / SK ER25 / 430E-P / SK ER32 / 470E-P / SK ER16 / 426E-P / SK ER25 / 430E-P / SK ER32 / 470E-P / SK ER16 / 426E-P / SK ER25 / 430E-P / SK ER32 / 470E-P / SK ER16 / 426E-P / SK ER25 / 430E-P / I type (SK-) (internal coolant supply) range ll prices in euro, VT excluded for collets SK ER32 / 470E-P / SK ER16 / 426E-P / SK ER32 / 470E-P / SK ER16 / 426E-P / SK ER32 / 470E-P / SK ER16 / 426E-P / nuts for collets esignation ER16 / 426E-P / - 30 PC ER16 / 426E-P / - 30 PC-16-I ER25 / 430E-P / - 40 PC ER25 / 430E-P / - 40 PC-25-I ER32 / 470E-P / - 50 PC ER32 / 470E-P / - 50 PC-32-I Chuck wrench esignation for clamping nut ROSC-Gr. 30 PC16 / PC16-I ROSC-Gr. 40 PC25 / PC25-I ROSC-Gr. 50 PC32 / PC32-I Torque-chuck wrench attachment esignation for clamping nut RROSC size 30 PC16 / PC16-I RROSC size 40 PC25 / PC25-I RROSC size 50 PC32 / PC32-I Prices in bold print = delivery ex stock 40-59

GER collets 2 μm GER-P collets 2 μm igher percentage of contact area, greater rigidity and holding forces, greater system concentricity Collapse in CETRO-P chuck = h10 Only for SR and Centro-P

5 GER25 / 430E =26 =34 GER32 / 470E =33 =40 1 433095 0010 2 433095 0020 433096 0020 433097 0020 3 433095 0030 433096 0030 433097 0030 4 433095 0040 433096 0040 433097 0040 5 433095 0050 433096 0050

60 GER collets 2 μm GER-P collets 2 μm igher percentage of contact area, greater rigidity and holding forces, greater system concentricity Collapse in CETRO-P chuck = h10 Only for SR and Centro-P precision ER collet chucks Ø GER16 / 426E =17 =27.5 GER25 / 430E =26 =34 GER32 / 470E =33 = Chuck extension MC ttachment is by means of the lbrecht PC precision chuck or coercially available shrink fit, hydraulic expansion or collet chucks Straight shank I h6 with high true running accuracy for clamping small tools for clockwise and anticlockwise rotation extremely slim version Tool clamping is executed in combination with a coated clamping sleeve and the hexagon wrench provided Version for clamping with clamping sleeve or three-jaw power chuck Supplied without clamping sleeve Ø range ,2-1, ,2-1, ,5-3, sleeves hardened, ground and coated Clamp Ø

Precision chuck PC new version with clamping range of 3-20 highest clamping force and stability due to the integrated worm gear via a coated clamping sleeve and adjustable length stop quick lateral

3 for SK50/SK100 igher speeds and fi ner balance quality available on request sealed against coolant and dirt With length adjustment in the clamping sleeve Special steel, all parts hardened and

on request True running accuracy 3μm I 69871- (internal coolant supply) range 1 1 2 3 SK 40 12-20 74 50 41 16,5 29,5 54,9 440120 4020 SK 40 3-14 160 50 30 74,5 103 140,9 440120 4114 SK 50 12-20 74 50

61 Precision chuck PC new version with clamping range of 3-20 highest clamping force and stability due to the integrated worm gear via a coated clamping sleeve and adjustable length stop quick lateral tool change using a hexagon wrench True running accuracy 3μm (for 2.5x) olding torque > 200 m (for shank Ø 12 ) alanced up to 20,000 rpm at G=2.5 for SK40/SK63 alanced up to 15,000 rpm at G=6.3 for SK50/SK100 igher speeds and fi ner balance quality available on request sealed against coolant and dirt With length adjustment in the clamping sleeve Special steel, all parts hardened and ground Tension limitation protects clamping sleeve from damage For heavy chip removal as well as SC and PC machining Supplied without hexagon wrench or clamping sleeve additional versions available on request True running accuracy 3μm I (internal coolant supply) range SK ,5 29,5 54, SK , , SK ,5 29,5 54, Fig. shows MS-T MS T range SK , SK , I SK- (internal coolant supply) range SK SK , SK , sleeves with special coating incl. adjustable length stop sealed version up to 100 bar coolant pressure Clamp Ø ll prices in euro, VT excluded range standard Sealed key for PC chuck djusted to 12 m escription Wr. width key for chuck PC EW O U VEU UOVO Prices in bold print = delivery ex stock Y UEVO

igh-precision chuck G igh-precision clamping of tools with straight shank by means of G collets Ideally suited to high-speed machining Taper angle tolerance quality T3 fi ne balanced G 2.

62 igh-precision chuck G igh-precision clamping of tools with straight shank by means of G collets Ideally suited to high-speed machining Taper angle tolerance quality T3 fi ne balanced G 2.5/25,000 rpm True running accuracy: 3 μm Supplied with clamping screw and pull-out hook, without collet I (internal coolant supply) esign esignation Clamp Ø SK 40 short G 01 2 / 3 / 4 / 5 / 6 / SK 40 short G / 12 / SK 40 short G / 18 / SK 40 long G 01 2 / 3 / 4 / 5 / 6 / SK 40 long G / 12 / SK 40 long G / 18 / SK 40 extra-long G 01 2 / 3 / 4 / 5 / 6 / SK 40 extra-long G / 12 / SK 40 extra-long G / 18 / SK 50 short G 01 2 / 3 / 4 / 5 / 6 / SK 50 short G / 12 / SK 50 short G / 18 / SK 50 long G 01 2 / 3 / 4 / 5 / 6 / SK 50 long G / 12 / SK 50 long G / 18 / SK 50 extra-long G 01 2 / 3 / 4 / 5 / 6 / SK 50 extra-long G / 12 / SK 50 extra-long G / 18 / JIS 6339 T (internal coolant supply) esign esignation Clamp Ø SK 40 short G 01 2 / 3 / 4 / 5 / 6 / SK 40 short G / 12 / SK 40 short G / 18 / SK 40 long G 01 2 / 3 / 4 / 5 / 6 / SK 40 long G / 12 / SK 40 long G / 18 / I SK- (internal coolant supply) esign esignation Clamp Ø SK 63 short / 3 / 4 / 5 / 6 / SK 63 short / 12 / SK 63 short / 18 / SK 63 extra-long / 3 / 4 / 5 / 6 / SK 63 extra-long / 12 / SK 63 extra-long / 18 / G collets igh-precision clamping of tools with straight shank in G chucks further sizes available on request suitable for 1 G ,7 52, G ,7 52, G ,7 52, G ,7 52, G ,7 52, G ,7 52, G ,87 64, G ,87 64, G ,87 64, G ,15 69, G ,15 69, G ,15 69,

$ydraulic expansion chucks vibration-absorbing tool clamping Increased tool endurance Reduction of micro-fractures on the tool cutting edge Improved surface fi nish quality fl exible due to the use of$

63 ydraulic expansion chucks vibration-absorbing tool clamping Increased tool endurance Reduction of micro-fractures on the tool cutting edge Improved surface fi nish quality fl exible due to the use of reducing bushes ow maintenance costs thanks to enclosed clamping system high torque transfer igh level of accuracy and precision True running accuracy - maximum 3μm balanced G 2.5 for 25,000 rpm Maximum speed 40,000 rpm (observe rpm limits of the interface, fi ne balancing recoended) optimum application temperature C; do not use above 80 C, higher temperatures available on request Coolant pressure max. 80 bar djustment range 10 Chip Ø at d1 Ø 20 Ø 3-16 with reducing bushes dditional shank designs and / version available on request elivery includes hexagonal T-key pre-balanced G ,000 rpm Illustration shows SK- shank I (internal coolant supply), short, heavy version Thread kg SK ,5 64, M16 x 1 1, SK M16 x 1 3, I (internal coolant supply), short, slim version Thread kg SK ,5 80, ,5 M5 1, SK ,5 80, M6 1, SK ,5 80, M8 x 1 1, SK ,5 80, M10 x 1 1, SK ,5 80, M10 x 1 1, SK ,5 80, M12 x 1 1, SK ,5 80, M12 x 1 1, SK ,5 80, M16 x 1 1, SK , M16 x 1 1, SK , M16 x 1 1, SK ,5 80, ,5 M5 3, SK ,5 80, M6 3, SK ,5 80, M8 x 1 3, SK ,5 80, M10 x 1 3, SK ,5 80, M10 x 1 3, SK ,5 80, M12 3, SK ,5 80, M12 3, SK ,5 80, M16 x 1 3, SK M16 x 1 3, SK M16 x 1 4, I (internal coolant supply), long, slim version Thread kg SK , M10 x 1 1, SK , M10 x 1 1, MS 403 T (internal coolant supply), short, heavy version 1 ll prices in euro, VT excluded Thread kg SK ,5 75, M16 x 1 1, SK M16 x 1 3, Prices in bold print = delivery ex stock 40-63

MS 403 T (internal coolant supply), short, slim version 1 2 3 2 3 4 Thread kg SK 40 6 26 49,5 90 37 10 29 M5 1,5 433307 4006 SK 40 8 28 49,5 90 37 10 30 M6 1,6 433307 4008 SK 40 10 30 49,5 90 41 10

64 MS 403 T (internal coolant supply), short, slim version Thread kg SK , M5 1, SK , M6 1, SK , M8 x 1 1, SK , M10 x 1 1, SK , M10 x 1 1, SK , M12 x 1 1, SK , M12 x 1 1, SK , M16 x 1 1, SK M16 x 1 1, SK M16 x 1 2, SK , M5 4, SK , M6 4, SK , M8 x 1 4, SK , M10 x 1 4, SK , M10 x 1 4, SK , M12 x 1 4, SK , M12 x 1 4, SK , M16 x 1 4, SK M16 x 1 4, SK M16 x I (SK-) short, slim version Thread kg SK M 5 0, SK M 6 0, SK M8 x SK M10 x SK M10 x 1 1, SK M12 x 1 1, SK M12 x 1 1, SK M16 x 1 1, SK M16 x 1 2, SK M16 x 1 2, SK M5 2, SK M6 2, SK M8 2, SK M10 x 1 2, SK M10 x 1 2, SK M12 x 1 2, SK M12 x 1 2, SK M16 x 1 2, SK M16 x 1 3, SK M16 x 1 3, I including reducing bushes (Internal coolant supply) short heavy design with 5 reducing bushes / sealed Ø 6 / 8 / 10 / 12 / SK ,5 64, M16 x , Thread

65 Power chuck by means of needle roller angular contact ball high holding forces True running accuracy for 3xd: 5μm balanced to 12,000 rpm for G=6.3 Concentricity between short taper shaft and tool holder 2 μm Supplied without chuck key suitable chuck keys no (d=20 ), (d=32 ) I / Internal coolant supply d Retention force SK SK SK SK d MS 403 T / Internal coolant supply 4125 d Retention force SK SK SK SK Reducing bushes slotted without seal or sealed suitable for hydraulic expansion chucks and power chucks without dirt groove For reducing clamping ranges, for drilling, reaming and milling True running accuracy < 3μm (for 2.5 x d) For chuck diameter 12 d1 d2 ll prices in euro, VT excluded l l1 l2 d Sealed For chuck diameter 20 d1 d2 l l1 l2 d standard Sealed For chuck diameter 32 d1 d2 l l1 l2 d standard Sealed Prices in bold print = delivery ex stock 40-65

66 Cutter arbours I 6359 For straight shanks I (WEO) alloyed case-hardened steel with tensile strength at core of min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < ore tolerance 4 Supplied with the clamping screw dditional shank designs and / version available on request I Internal coolant supply d with coolant bore SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK

67 I 2080 MS 403 T Internal coolant supply d d SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK ll prices in euro, VT excluded with coolant bores SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK Prices in bold print = delivery ex stock 40-67

68 I type (SK-) Internal coolant supply d with coolant bores SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK Polygon shank EPS ISO d EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS EPS

69 Cutter arbours I 6359 For straight shanks I (WEO) alloyed case-hardened steel with tensile strength at the core of min. 950 / 2 case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2 nickel-plated Pre-balanced G 2.5/25,000 rpm with alluffchip bore Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < ore tolerance 4 Supplied with the clamping screw nickel-plated and pre-balanced G2.5 25,000 rpm I Internal coolant supply d SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK I type (SK-) Internal coolant supply d 4117 SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-69

70 Transverse slot milling cutter arbour with enlarged collar diameter alloyed case-hardened steel, tensile strength at core min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < Supplied incl. carrier blocks and cutter retaining screw dditional shank designs and / version available on request I 2080 *= dditionally with four I 2079-compliant threaded boles for holding cutter heads 1 1 SK SK SK SK SK 40* SK SK SK SK 50* I Internal coolant supply *= dditionally with four I 2079-compliant threaded boles for holding cutter heads 1 1 SK SK SK SK SK SK SK SK 40* SK 40* SK SK SK SK SK SK SK 50* SK 50* MS 403 T Internal coolant supply *= dditionally with four I 2079-compliant threaded boles for holding cutter heads SK SK SK SK SK 40* SK SK SK SK 50* Polygon shank EPS ISO EPS EPS EPS EPS EPS

71 I type (SK-) Internal coolant supply SK 80 holder available on request *= dditionally with four I 2079-compliant threaded boles for holding cutter heads 1 1 SK SK SK SK SK SK SK SK SK SK SK SK SK 63* SK SK SK 100* SK 100* Transverse slot shell holder with enlarged collar diameter alloyed case-hardened steel, tensile strength at core min. 950 / 2 case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2 nickel-plated Pre-balanced G 2.5/25,000 rpm with alluffchip bore Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < Supplied incl. carrier blocks and cutter retaining screw nickel-plated and pre-balanced G2.5 / 25,000 rpm I Internal coolant supply *= dditionally with four I 2079-compliant threaded boles for holding cutter heads ll prices in euro, VT excluded 1 1 SK SK SK SK SK SK SK SK 40* SK 40* I type (SK-) internal coolant supply SK 80 fi xture available on request 1 1 SK SK SK SK SK SK SK SK SK 63* Prices in bold print = delivery ex stock 40-71

72 Combination milling cutter arbour for milling cutters with longitudinal or transverse slot alloyed case-hardened steel, tensile strength at core min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < Collapse in CETRO-P chuck = h10 elivery incl. fi tting key, follower ring and tightening bolt without coolant bore dditional shank designs and / versions available on request I SK SK SK SK SK SK SK SK SK SK I Internal coolant supply SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK MS 403 T SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK

73 I type (SK-) Internal coolant supply 1 ll prices in euro, VT excluded 1 SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK Polygon shank EPS ISO EPS EPS EPS EPS EPS Combination milling cutter arbour for milling cutters with longitudinal or transverse slot! alloyed case-hardened steel, tensile strength at core min. 950 / 2 case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2 nickel-plated Pre-balanced G 2.5/25,000 rpm with alluffchip bore Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < elivery incl. fi tting key, follower ring and tightening bolt without coolant bore I Internal coolant supply 1 1 SK SK SK SK SK SK SK SK SK SK SK SK SK SK SK I type (SK-) 4117 Internal coolant supply 1 1 SK SK SK SK SK SK SK SK SK SK nickel-plated and pre-balanced G2.5 / 25,000 rpm Prices in bold print = delivery ex stock 40-73

Combination shell holder KOMI-PUS Variable clamping range by using mandrels of diff erent lengths dvantage: free front face, no interfering pull studs Chuck I 69871 ore hole Ø SK 40 16 30 69 434913

Mandrels 40 65 101 434913 5040 4121 Milling tool height 16 0-40 434920 1640 16 40-80 434920 1680 16 80-120 434920 1612 22 0-40 434920 2240 22 40-80 434920 2280 22 80-120 434920 2212 27 0-40 434920

74 Combination shell holder KOMI-PUS Variable clamping range by using mandrels of diff erent lengths dvantage: free front face, no interfering pull studs Chuck I ore hole Ø SK SK SK SK SK SK SK SK SK 50 Mandrels Milling tool height Spacing collars Type and steel, cut, hardened (min. 52 Rc) eviation from the width and parallelism depends on the tolerance of the original semi-fi nished product in accordance with I 1544 d d d Type alloyed and case-hardened steel, turned and ground, hardened (min. 52 Rc) eviation of the parallelism of the width is IT3 in relation to the bore hole

75 dapters for morse taper with tangs alloyed case-hardened steel, tensile strength at core min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished, Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < additional versions available on request I 2080 interior ll prices in euro, VT excluded SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK I Internal coolant supply interior SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK MS 403 T Internal coolant supply interior T40 MK T40 MK T40 MK T40 MK T50 MK T50 MK T50 MK T50 MK T50 MK I type (SK-) Internal coolant supply interior SK- 50 MK SK- 50 MK SK- 50 MK SK- 63 MK SK- 63 MK SK- 63 MK SK- 63 MK SK- 100 MK SK- 100 MK SK- 100 MK SK- 100 MK SK- 100 MK Prices in bold print = delivery ex stock 40-75

76 Polygon shank EPS ISO interior EPS 63 MK EPS 63 MK EPS 63 MK dapters for morse taper with tangs alloyed case-hardened steel, tensile strength at core min. 950 / 2 case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2 nickel-plated Pre-balanced G 2.5/25,000 rpm with alluffchip bore Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < nickel-plated and pre-balanced G2.5 / 25,000 rpm I Internal coolant supply interior SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK dapters for short taper for holding all short taper systems (I 2080, I 69871, MS T, SI-CT) alloyed case-hardened steel with tensile strength at the core of min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 in accordance with I 7187 and I 2080, max. true running accuracy < I 2080 interior SK 40 SK SK 40 SK SK 50 SK SK 50 SK I interior SK 40 SK SK 40 SK SK 50 SK SK 50 SK MS 403 T interior T T T T

77 dapters for morse taper with clamping thread alloyed case-hardened steel, tensile strength at core min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < additional versions available on request I 2080 interior ll prices in euro, VT excluded SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK I interior SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 40 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK SK 50 MK MS 403 T interior T40 MK T40 MK T40 MK T40 MK T40 MK T50 MK T50 MK T50 MK T50 MK T50 MK T50 MK T50 MK I type (SK-) 4117 interior SK- 100 MK SK- 100 MK SK- 100 MK SK- 100 MK SK- 100 MK SK- 50 MK SK- 50 MK SK- 50 MK SK- 63 MK SK- 63 MK SK- 63 MK SK- 63 MK Prices in bold print = delivery ex stock 40-77

78 djustable tool holder olds tools with straight shank (shank Ø 25 and 32 ) such as solid drill bits Very large adjusting range: -0.6 to +2.4 in diameter, taking the example of the SR solid drill bit: rill bit Ø 22 (item no ) adjustable to min. Ø 21.7 / max. Ø 24.4 Caution: djusting range of tools as per manufacturer s instructions specifications must be observed Fine adjustment: 0.01 per partial line in diameter I Internal coolant supply Ø SK SK Tool holder for indexable insert drills alloyed case-hardened steel, tensile strength at core min. 950 / 2 Case-hardened Rc 60 ± 2 (V 700 ± 50), hardness depth 0.8 ± 0.2, burnished, Pre-balanced G 6.3/12,000 rpm Taper angle tolerance quality < T3 according to I 7187 and I 2080 Max. true running accuracy < additional versions available on request I / Internal coolant supply d SK SK SK igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools

79 Tool holders for screw-in milling cutters Taper angle tolerance T3, balanced G 6.3 / 20,000 min -1 True running accuracy steep-angle taper for tool holder I 69871: < 0.003, SK 63 : < MS/T-/ version available on request I Internal coolant supply Thread d SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 40 M SK 63 Internal coolant supply Thread d SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M SK 63 M Polygon shank EPS ISO Thread d EPS 63 M EPS 63 M EPS 63 M EPS 63 M EPS 63 M EPS 63 M EPS 63 M EPS 63 M Key to steel pocket book Useful information on steel Materials science, materials testing Key to steel extract Steel identifi cation systems, dimensions and units Mathematics and geometry, tables bbreviations for standards designations / standardisation institutes ist of Werkstoff numbers in numerical order ll prices in euro, VT excluded escription Key to steel pocket book, plastic cover, 200 pages. I Prices in bold print = delivery ex stock 40-79

80 Extension for modular cutter heads eavy metal version, straight shank offset M M M M M M M M Thread Ø1 M 1 Ø Solid carbide version with internal coolant supply, straight shank smooth M M M M M M M M M M M Thread M Ø Solid carbide version with internal coolant supply, straight shank offset ,7 M ,7 M ,7 M ,5 M ,5 M ,5 M ,5 M ,5 M ,5 M ,5 M ,5 M ,5 M M M M M M M Thread Ø1 M 1 Ø igh quality for great performance. Multiple clamps by TOR: high-strength materials quick and exact clamping of multiple workpieces highest clamping force This is but one example of TOR s high-quality clamping tools

Test mandrels hollow-bored in stages forged, case hardened (Rc 58+2) precision-ground Taper tolerance T3 eccentricity < 0.

320 M 24 436311 5040 4127 SK 30 32 200 M 12 436313 3032 SK 40 40 320 M 16 436313 4040 SK 50 40 320 M 24 436313 5040 4127

436319 1040 SK- 40 24 180 436319 4024 SK- 50 32 236 436319 5032 SK- 63 40 346 436319 6340 SK- 80 40 346 436319 8040 4127 lank

2080 SK 40 250 63 431000 4063 SK 50 315 97 431000 5097 4117 I 69871 SK 40 250 63 431002 4063 SK 50 315 97 431002 5097 4117

81 Test mandrels hollow-bored in stages forged, case hardened (Rc 58+2) precision-ground Taper tolerance T3 eccentricity < Supplied in wooden box for vertical storage with test certifi cate I 2080 I SK M SK M SK M SK M SK M Thread Thread I type (SK-) With 4 grooves at the cone end For measuring at 0, 90, 180 and 270 settings SK SK SK SK SK lank boring bars Steep-angle taper and collar case-hardened Rc 60 ± 2 (V 700 ± 50) and ground Soft shank for further machining I 2080 SK SK I SK SK Polygon shank EPS ISO ll prices in euro, VT excluded EPS Prices in bold print = delivery ex stock 40-81

Cutter extension SRmicro Tool holding fi xture with clamping surface in accordance with I 1835 (shank Ø of 6-20 ) Thanks to an extremely slim design, standard tools can be elongated without the need

(16/20/25 or 32 ) ote: To ensure the tool is correctly clamped, pay attention to ensure that the clamp is correctly positioned in the hole!

25 32 125 45 445001 0016 18 130 18 27 32 130 54 445001 0018 20 130 20 30 32 130 62 445001 0020 4122 Spare parts = Tool, = wedge, C = bar, = screw escription Wedge for SRmicro 6 445010 0106 Wedge for

SRmicro 20 445010 0120 bar for SRmicro 6 445010 0206 bar for SRmicro 8 445010 0208 bar for SRmicro 10 445010 0210 bar for SRmicro 12 445010 0212 bar for SRmicro 14 445010 0214 bar for SRmicro 16

82 Cutter extension SRmicro Tool holding fi xture with clamping surface in accordance with I 1835 (shank Ø of 6-20 ) Thanks to an extremely slim design, standard tools can be elongated without the need for special tools Extremely stable due to combination tension, internal coolant supply possible True running accuracy: 5 μm pplication: In standard tool holding fi xtures of equivalent diameter (16/20/25 or 32 ) ote: To ensure the tool is correctly clamped, pay attention to ensure that the clamp is correctly positioned in the hole! Ø ength Spare parts = Tool, = wedge, C = bar, = screw escription Wedge for SRmicro Wedge for SRmicro Wedge for SRmicro Wedge for SRmicro Wedge for SRmicro Wedge for SR Micro Wedge for SRmicro Wedge for SRmicro bar for SRmicro bar for SRmicro bar for SRmicro bar for SRmicro bar for SRmicro bar for SRmicro bar for SRmicro bar for SRmicro screw for SRmicro screw for SRmicro screw for SRmicro screw for SRmicro screw for SRmicro screw for SRmicro screw for SRmicro screw for SRmicro Saw blade holder zur ufnahme von Sägeblättern der Stärke 0,2 bis 6 hochvergütet ußen- und Innendurchmesser geschliff en Schaftausführung nach I 1835 Rundlaufgenauigkeit 0,01 ieferung mit ufnahmedorn, Spannschraube und Zwischenring Kit for saw blade size d Contents 5 Saw blade holders in wooden platform

83 Taper cleaner robust wooden body with felt strips For cleaning the internal taper on machines and sleeves Felt strips resistant to oil and emulsion igh suction capacity long service life Morse taper wiper for taper support Short taper wiper for taper support ollow taper wiper for taper support Total length MK MK MK MK MK Total length SK SK SK Total length SK SK SK SK SK screws for cutter arbours I 6359 Weldon clamping screws I 1835 For clamping cylindrical shanks I 1835 in cutter arbours I 6359/1835 Part 2-3 (Weldon jaw chuck) For standard and long chuck designs screws for short chuck versions (Ø 16/20/25 =35, Ø 32 =65) available on request Thread for Ø M M M M M18x M20x M M Whistle-notch clamping screws I 1835 E Version with ball for clamping cylindrical shanks I 1835 E (with suitable clamping surface) in cutter arbours I 6359/1835 Part 2-3 (Weldon jaw chuck) Thread ll prices in euro, VT excluded for Ø M M M M M M M18x M20x Prices in bold print = delivery ex stock 40-83

84 Fitting keys For combination milling cutter arbours for gauge Ø Cutter retaining screw for milling cutter arbours 1 for gauge Ø 2 K standard For IC M M M M M M Cutter retaining screw For cutter arbours, holding fixtures for cutter heads and milling cutters with drive slot The diff erent inclines of the two threads on the threaded bolt generate a strong locking eff ect. The milling cutter is securely clamped without major exertion of force, without tube extensions and haer blows. for gauge Ø ,8 4 M ,6 5 M , M ,5 9 2,5 8 M , M M , M R S Thread Carrier blocks For transverse slot milling cutter arbours with screw for gauge Ø

85 Follower ring for milling cutter arbours , , Chuck key For clamping nuts type ER I 6499, slotted nuts I 1804 and roller bearing nuts I 981 Special steel for clamping nut ER ER ER ER ER for clamping nut ER 11 MII 22, ER 16 MII 22, ER 20 MII ook wrench Special steel, hardened and burnished * not according to I With milled nose, for slotted nuts I 1804 I 1810 Wr. width Total length Thickness igh quality for great performance. djustable wrenches by TOR: innovative combination of materials perfect feel best resilience exact adjustment This is but one example of TOR s high-quality hand tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-85

Wrench for milling cutter arbours For tightening the retaining screws according to I 6367 Special steel hardened, tempered to a burnished tone for gauge Ø Thread 16 M8 20 180 438005 0016 22 M10 25

86 Wrench for milling cutter arbours For tightening the retaining screws according to I 6367 Special steel hardened, tempered to a burnished tone for gauge Ø Thread 16 M M M M M M Key for coolant transfer pipe SK , SK , SK , SK , SK , SK Coolant transfer pipe For optimising the central coolant supply for hollow shaft tapers in accordance with I SK- with two mounted sealing rings 1 2 SK ,5 6 M10 x SK 40 29,5 7,5 8 M12 x SK ,5 10 M16 x SK 63 34,5 11,5 12 M18 x SK M20 x SK ,5 16 M24 x Thread igh quality for great performance. Tool carts by TOR: highly resilient materials extremely flexible compartments will not topple over even when drawers are open easy in and out of the drawers drawer stop to prevent simultaneous opening of more than one drawer This is but one example of TOR s high-quality workshop furnishings

87 Pull studs For tools with steep-angle taper according to I and JIS 6339 (MS-T) all pull studs are made of 16Mn Cr5, case hardened Rc 58 ±2 Soft thread and bore hole, burnished and ground Pull studs with O-ring = sealed Other versions available on request (machine model must be specifi ed) I shape, with bore hole suitable for 1 2 Thread I shape, without bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK M no SK M yes SK M yes ore hole Ø O-ring SK M no SK M yes SK M ,5 yes ISO 7388II, with bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK40 18,95 12,95 17 M16 44,5 16,25 7 yes SK50 29,1 19,6 25 M24 65,5 25,55 11,5 yes ISO 7388II, without bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK40 18,95 12,95 17 M16 44,5 16,25 yes SK50 29,1 19,6 25 M24 65,5 25,55 yes MS T 45 JIS 6339, with bore hole suitable for 1 2 Thread ll prices in euro, VT excluded 1 ore hole Ø O-ring SK ,5 M no SK M yes SK M no MS T 45 JIS 6339, without bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK ,5 M no SK M yes SK M yes Prices in bold print = delivery ex stock 40-87

88 MS T 60 JIS 6339, with bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK ,5 M no SK M yes SK M yes MS T 60 JIS 6339, with bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK ,5 M no SK M yes SK M yes MS T 90 JIS 6339, with bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK M yes SK M yes MS T 90 JIS 6339, without bore hole suitable for 1 2 Thread 1 ore hole Ø O-ring SK M yes SK M yes G 1 M 2 Ott ring groove 15 with thread in the head, for shank I suitable for 1 2 Thread 1 ore hole Ø O-ring SK ,1 17 M ,1 M16 / 7.5 no SK50 39, M24 65,1 25,1 M24 / 11.5 no M 16 / M 24 1 G 1 2 Ott ring groove 15 with bore hole, for shank I suitable for 1 2 Thread 1 ore hole Ø O-ring SK ,1 17 M ,1 7,5 no SK50 39, M24 65,1 25,1 11,5 no Ott ring groove 15 without bore hole, for shank I suitable for 1 2 Thread 1 ore hole Ø O-ring SK ,1 17 M ,1 no SK50 39, M24 65,1 25,1 no M 16 / M 24 M 16 / M 24 uttress thread stud SK40 S20X2 for cover suitable for 1 2 Thread ore hole Ø O-ring SK40 S20 x 2-17 S20x2 56,2 28 no

Thread cutter Powerflex S1 Pneumatic For threads M2 M14 For cutting threads vertically and horizontally Pneumatically driven motor Working area radium 370 to 935 Working area height 660 Standard

articulated arm with vertical thread cutting, swivel adapter for horizontal thread cutting (please order quickaction drill chucks or quick-action inserts separately) Swivel adapter for horizontal

Manual hand-driven thread cutting on drills Can be used for right-handed and left-handed threads without maintenance Thanks to integrated rotating thread, can be used without reversing the spindle

inserts d 1 1 ength compensation, pressure ength compensation, tension MK 2 19 33 78 132 43 0 3,5 M3 - M12 442200 1202 MK 3 19 33 78 132 43 0 3,5 M3 - M12 442200 1203 MK 3 31 50 83 180 67 0 3,5 M6 -

89 Thread cutter Powerflex S1 Pneumatic For threads M2 M14 For cutting threads vertically and horizontally Pneumatically driven motor Working area radium 370 to 935 Working area height 660 Standard compressed air connection (6-8 bar) is suffi cient For holding quick-change inserts Maintenance unit fi tted utomatic tool lubrication system available on request Supplied with base tool holder, articulated arm with vertical thread cutting, swivel adapter for horizontal thread cutting (please order quickaction drill chucks or quick-action inserts separately) Swivel adapter for horizontal thread cutting Insert Rotational speed r/min Torque m ir consumption l/min M2 - M M2 - M ccessories escription Table clamp Tap Manual hand-driven thread cutting on drills Can be used for right-handed and left-handed threads without maintenance Thanks to integrated rotating thread, can be used without reversing the spindle utomatic shut-off via low-wear ball system when machine spindle is withdrawn once the thread depth has been reached Stopping arm must be secured against twisting before operation Supplied without inserts d 1 1 ength compensation, pressure ength compensation, tension MK ,5 M3 - M MK ,5 M3 - M MK ,5 M6 - M MK ,5 M6 - M Insert igh quality for great performance. TOR s taps: highest cutting speeds precision-ground for safest machining ISO colour codes for easy identification of the correct tool This is but one example of TOR s high-quality drilling tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-89

sleeve for a tap Torsion-free version Tap clamping sleeve for machines with synchronous threading mechanism pplication: in conventional chucks in accordance with I 1835 (Weldon jaw chuck), Taps at

2,5 2,1 442011 0025 8 2,8 2,1 442011 0028 10 3,5 2,7 442011 0035 10 4 3 442011 0040 10 4,5 3,4 442011 0045 12 6 4,9 442011 0060 14 7 5,5 442011 0070 14 8 6,2 442011 0080 16 9 7 442011 0090 16 10 8

0280 50 32 24 442011 0320 50 36 29 442011 0360 50 40 32 442011 0400 4121 Thread cutting quick-change chuck automatic locking of the inserts Elastic push and pull longitudinal displacement For

power drills and milling machines further sizes are available on request I 2080 d ength compensation, pressure ength compensation, tension SK 40 19 36 53 7,5 7,5 M 3 - M 12 442001 4012 SK 40 31 53

12 442003 4012 SK 40 31 53 100 98 12,5 12,5 M 8 - M 20 442003 4024 SK 50 19 36 62 60 7,5 7,5 M 8 - M 20 442003 5012 SK 50 31 53 83 84 12,5 12,5 M 8 - M 20 442003 5024 4117 Thread MS/T 40-90 d

90 sleeve for a tap Torsion-free version Tap clamping sleeve for machines with synchronous threading mechanism pplication: in conventional chucks in accordance with I 1835 (Weldon jaw chuck), Taps at areas that are diffi cult to access Synchronisation between speed and forward thrust, no slip between sleeve and drill 100% cooling at the cutting edge with internal coolant supply d Quadratic 8 2,5 2, ,8 2, ,5 2, ,5 3, , , , , Thread cutting quick-change chuck automatic locking of the inserts Elastic push and pull longitudinal displacement For quick-release inserts with adjustable safety coupling Minimum residual torque prevents tap breakage For threading on mechanically and numerically controlled radial drilling machines as well as power drills and milling machines further sizes are available on request I 2080 d ength compensation, pressure ength compensation, tension SK ,5 7,5 M 3 - M SK ,5 12,5 M 8 - M SK ,5 12,5 M 8 - M Thread I d ength compensation, pressure ength compensation, tension SK ,5 7,5 M 3 - M SK ,5 12,5 M 8 - M SK ,5 7,5 M 8 - M SK ,5 12,5 M 8 - M Thread MS/T d ength compensation, pressure ength compensation, tension SK ,5 7,5 M 3 - M SK ,5 12,5 M 8 - M SK ,5 12,5 M 8 - M Thread

91 cylindrical shank similar to I E Ø I 228 d ength compensation, pressure ength compensation, tension M 3 - M M 6 - M d ength compensation, pressure ength compensation, tension MK M 3 - M MK M 3 - M MK M 6 - M MK M 6 - M Thread Thread Quick-release inserts further sizes available on request Without coupling d Ø ll prices in euro, VT excluded 1 Thread I 2,8 2, M ,5 2, M , M ,5 3, M , M , M , M M M M , M , M , M M M M M M M , M with safety coupling d Ø 1 Thread I with adjustable coupling 2,8 2, M ,5 2, M , M ,5 3, M , M , M , M M M M , M , M , M M M M M M M , M Without coupling with safety coupling Prices in bold print = delivery ex stock 40-91

Thread cutting quick-change chuck for synchronised spindles Minimal longitudinal displacement thanks to damping element Secure clamping in quick-change inserts for ER collets screws for securing to

compensation, pressure ength compensation, tension for thread SK 40 ER16 20 43 53 0,2 1 M3 - M12 442020 4016 SK 40 ER25 32 60 90 0,2 1 M6 - M20 442020 4025 SK 50 ER16 20 43 53 0,2 1 M3 - M12 442020

compensation, pressure ength compensation, tension for thread SK- 63 ER16 20 43 64 0,2 1 M3 - M12 442021 6316 SK- 63 ER25 32 60 97 0,2 1 M6 - M20 442021 6325 4117 Similar to straight shank I 1835 +E

92 Thread cutting quick-change chuck for synchronised spindles Minimal longitudinal displacement thanks to damping element Secure clamping in quick-change inserts for ER collets screws for securing to prevent the clamped tap from twisting For use on CC drills and machining centres with synchronised spindles I Internal coolant supply Supplied without quick-change insert for collets d ength compensation, pressure ength compensation, tension for thread SK 40 ER ,2 1 M3 - M SK 40 ER ,2 1 M6 - M SK 50 ER ,2 1 M3 - M SK 50 ER ,2 1 M6 - M Supplied without quick-change insert I type (SK-) Internal coolant supply Supplied without quick-change insert for collets d ength compensation, pressure ength compensation, tension for thread SK- 63 ER ,2 1 M3 - M SK- 63 ER ,2 1 M6 - M Similar to straight shank I E Supplied without quick-change insert for collets d ength compensation, pressure ength compensation, tension for thread Ø 25 ER ,2 1 M3 - M Ø 25 ER ,2 1 M6 - M Quick-change inserts, one-piece for collets 1 1 for thread ER M3 - M ER M6 - M Quick-change inserts, two-piece for collets 1 1 for thread ER M3 - M ER M6 - M Extension for two-piece quick-change inserts for thread M3 - M M3 - M M6 - M M6 - M Illustration shows an extended quick-change insert with two extensions igh quality for great performance. djustable wrenches by TOR: innovative combination of materials perfect feel best resilience exact adjustment This is but one example of TOR s high-quality hand tools

ER collet shape With square socket For clamping threading tools Ø Quadratic ER16 4031E ER20 4276E ER25 4282E ER32 4537E ER40 4716E 3,5 2,7 18 433050 0035 433053 0035 433055 0035 4,5 3,4 18 433050

0070 433059 0070 8 6,3 22 433050 0080 433053 0080 433055 0080 433057 0080 433059 0080 9 7,1 22 433053 0090 433055 0090 433057 0090 433059 0090 10 8 25 433053 0100 433055 0100 433057 0100 433059 0100

93 ER collet shape With square socket For clamping threading tools Ø Quadratic ER E ER E ER E ER E ER E 3,5 2, ,5 3, ,5 4, , , , , , Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Safety goggles atreathing protection appar Starting on page Starting on page Starting on page us Technical manual Cutting value recoendations and guideline operating values Twist drills, machine taps, drilling tools with cutting inserts, circle cutters, counterbores, countersinks, reamers, core drilling tools Circular saw blades, end milling cutters, thread mills, milling tools with indexable insert, disc milling cutter Rotatable indexable insert with holder, turning tools for thread cutting, recessing tools, parting-off tools, plunge-cut tools, knurling tools designs, tool holders Guideline values for grinding material Materials, technical data, dimension units, fi ts, tolerances ll prices in euro, VT excluded escription Cartoned, 180 pages, colour Prices in bold print = delivery ex stock 40-93

Shrinking technology The aim to use tools and tool holders to create a unique that offers the ideal conditions for machining The advantage of inductive shrinking technology is that the high energy

With the tool holders, it is particularly interesting to note that absolutely no clamping elements are required (clamping nuts etc.

We will be glad to send you further information on the full range of shrinking equipment upon request!

94 Shrinking technology The aim to use tools and tool holders to create a unique that offers the ideal conditions for machining The advantage of inductive shrinking technology is that the high energy density applied in a very short time to the tool holder enables even SS tools to be clamped. With the tool holders, it is particularly interesting to note that absolutely no clamping elements are required (clamping nuts etc.), which in turn enables slim constructions with a very high stability and a very low inherent imbalance. We will be glad to send you further information on the full range of shrinking equipment upon request! dvantages: Very high clamping forces Maximum true running accuracy 3μm thanks to centric clamping igher service lives of tools and spindles Good surfaces thanks to high stability of tool clamping Good resistance to bending and radial forces, even with large projections Slender chuck form Syetrical chuck ow imbalance ThermoGrip inductive shrinking unit MS502 Specifi cally suitable for slim, thin-walled and extremely short shrink fi t holder Ø 3 to 20 lso suitable for chucks Ø 3 to 16 Gentle heating thanks to controllable generator output ow heat output, cooling using air cooling unit is suffi cient lso suitable for carbide metal shanks Supplied with 4 shielding rings and protective gloves, no tool holder Micro shrinking unit escription for Ø Output kw Connection kg With cooling unit V Without cooling V ccessories escription Tool holder SK Tool holder SK Tool holder SK Tool holder SK Tool holder SK Tool holder SK Tool holder SK ThermoGrip inductive shrinking unit ISG2202 Inductive shrinking unit for shrinking hard metal shanks of Ø 3-20 and SS steel shanks Ø 6-20 The induction coil can easily be lowered manually into the heating position and locked into place there at the press of a button. Select the shrink diameter on the display panel and press the start button. The saved cycle time is processed, the coil automatically moves upwards after completion. The process can be ended early with a stop key. In conjunction with the chiller unit FKS03, shrinking, cooling and cleaning can occur in a matter of seconds. Supplied with induction coil and three alternative discs, colour: R 9002 T Connection Output kw kg V / ccessories escription Tool holder SK 30/ Tool holder SK Tool holder SK 25/ Tool holder SK 40/

Cooling station Cooler iquid cooler for shrink fi t holder contour dependent cooling Cooling, cleaning and preserving the fi xtures in a single operation, automatically at the press of a button Cycle

(ose and blow gun not included) Cooling station 450 320 910 432728 0001 4129 ccessories escription Coolant concentrate 1 litre 432729 0006 4129 Shrink-fit chuck extensions Extend your shrink-fi t

95 Cooling station Cooler iquid cooler for shrink fi t holder contour dependent cooling Cooling, cleaning and preserving the fi xtures in a single operation, automatically at the press of a button Cycle time approx. 25 sec. Supplied with tool holder SK 40.1 litre cooling liquid concentrate, please order required tool holder separately! (ose and blow gun not included) Cooling station ccessories escription Coolant concentrate 1 litre Shrink-fit chuck extensions Extend your shrink-fi t chuck in a modular fashion as you need it! est possible retention force Maximum thickness ratio (3 mould incline) lmost monolithic form further sizes available on request d1 d2 d , , , M M M M M , M M M M M M M Thread igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-95

96 ThermoGrip shrink fit holder igh-precision clamping of milling tools with straight shank Tool shanks in accordance with I 6335 shape, and E. Tool shanks in accordance with I 1835 shape und with shank tolerance h6 and Ra < 0.3.a Patented widening for automatic shrink process Cross-section view shows the patented cylindrical counterbore (red) I shape Internal coolant supply alanced for 18,000 rpm SK I Internal coolant supply alanced for 24,000 min -1 for an automatic tool change With hole for manual tool change for the most coon manual clamping systems Clamp Ø Clamp Ø d2 d2 d3 d3 l1 l1 SK M SK M SK M SK M SK M SK M SK M SK M SK M SK M SK M SK M8x SK M8x SK M8x SK M8x SK M10x SK M10x SK M10x SK M10x SK M10x SK M10x SK M12x SK M12x SK M12x SK M12x SK M12x SK M12x SK M16x SK M16x SK M16x SK M16x SK M16x SK M16x SK M16x l2 l2 Thread V SK M SK M SK M SK M SK M SK M SK M SK M8x SK M8x SK M10x SK M10x SK M10x SK M10x SK M12x SK M12x SK M12x SK M12x SK M16x SK M16x SK M16x SK M16x Thread 40-96

ThermoGrip shrink fit holder JetSleeve Revolutionary solution for mould engineering and SC machining The coolant is fed via various nozzles directly to the cutting edge.

97 ThermoGrip shrink fit holder JetSleeve Revolutionary solution for mould engineering and SC machining The coolant is fed via various nozzles directly to the cutting edge. Chips are blown away and not run through. Increases service life up to 300% Chips do not scratch the surface Optimum cooling of the tool holder through to the cutting edge The JetSleeve innovation Rotating chuck with agent duct. ozzle adapter is screwed directly onto the shrink fi t holder, the milling machine does not need to be retrofi tted. Seated absolutely fi rmly even in high-speed spindles. Pressure is built up in the nozzle unit, and the fl ow eff ect from the nozzles keeps the coolant jet always on the milling chuck. Optimum radial run-out, only minimal imbalance. The JetSleeve chucks can be used on all conventional milling machines with internal coolant supply Suitable for all agents: ir, minimum-volume lubrication, cooling lubricant Energy effi cient and environmentally friendly I form, slim model With nozzle adapter d1 d2 d3 l1 V Thread Wr. width SK M SK M SK M SK M SK M SK M8x SK M10x SK M12x I form, reinforced model, for severe chipping With nozzle adapter d1 d2 d3 l1 V Thread Wr. width SK M SK M8x SK M10x SK M12x SK I With nozzle adapter d1 d2 d3 l1 V Thread Wr. width SK M SK M SK M SK M SK M SK M8x SK M10x SK M12x SK M16x SK I 69893, reinforced model, for severe chipping With nozzle adapter d1 d2 d3 l1 V Thread Wr. width SK M SK M8x SK M10x SK M12x SK M16x ll prices in euro, VT excluded Prices in bold print = delivery ex stock 40-97

Torque wrench for nozzle adapter 3/8 square drive with square plug tool 9x12 rea m Quadratic 4-40 218 3/8 430260 0100 4129 Ring spanner for torque wrench Wr.

430260 0050 4129 ThermoGrip shrink collets TER The revolutionary collet chuck Optimum true running < 3 μm Excellent changeover precision highest holding forces excellent dimensional stability

98 Torque wrench for nozzle adapter 3/8 square drive with square plug tool 9x12 rea m Quadratic / Ring spanner for torque wrench Wr. width Quadratic Tightening torque m 19 3/ / / / / / / / ThermoGrip shrink collets TER The revolutionary collet chuck Optimum true running < 3 μm Excellent changeover precision highest holding forces excellent dimensional stability pplication areas: in collet chucks standard chucks with standard clamping nuts can be used, the collet is coolant proof, no dirt in the slots, therefore no soiling of the clamping taper in the driven tool holder clamped as short as possible, extremely rigid, no unwanted movement of the cutting tool best guidance accuracy directly in the machine spindle high changeover precision, minimum imbalance, very short design TER shrink collets according to I 6499 Type d TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER TER Main adapter with length stop for TER collet inserts for shrinkage device Inserts for TER collets IG 2202 / ISG 2200 / ISG 2200 WK ISG 3200 WK for type TER TER TER TER Examples of use are in collet chucks or in powered tool holders

Overview and possible uses of I 69880-compliant VI tool holder with straight shank and internal coolant

rotation left TYPE 1 e 5 TYPE 2 e 6 TYPE 3 e 7 TYPE 4 e 8 TYPE C3 TYPE C1 TYPE C4 TYPE C2 direction of

Surface hardness 58-60 Rc Core strength V950 / 2 ardness depth 0.8 ± 0.

7 16 25 30 30 16 446005 0020 30 70 35 10 20 28 38 40 22 446005 0030 40 85 42,5 12,5 25 32,5 48 44 22

l2 20 55 30 7 16 25 30 30 16 446007 0020 30 70 35 10 20 28 38 40 22 446007 0030 40 85 42,5 12,5 25 32,5

d1 b1 b2 ll prices in euro, VT excluded b3 h1 h5 h6 l1 l2 20 55 30 7 16 25 30 30 16 446009 0020 30 70 35

99 Overview and possible uses of I compliant VI tool holder with straight shank and internal coolant supply for C lathes TYPE 3 e 7 TYPE 1 e 5 direction of spindle rotation right direction of spindle rotation left TYPE 1 e 5 TYPE 2 e 6 TYPE 3 e 7 TYPE 4 e 8 TYPE C3 TYPE C1 TYPE C4 TYPE C2 direction of spindle rotation right direction of spindle rotation left TYPE C1 TYPE C3 Square axial tool holder Surface hardness Rc Core strength V950 / 2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground Shape 1 right-hand, short d1 b1 b2 b3 h1 h5 h6 l1 l ,5 12, , Shape 2 left-hand, short d1 b1 b2 b3 h1 h5 h6 l1 l ,5 12, , Shape 3 for overhead work right, short d1 b1 b2 ll prices in euro, VT excluded b3 h1 h5 h6 l1 l ,5 12, , Prices in bold print = delivery ex stock 40-99

Shape 4 for overhead work left, short d1 b1 b2 b3 h1 h5 h6 l1 l2 20 55 30 7 16 25 30 30 16 446011 0020

60 55 30 446011 0050 4134 Square axial tool holder Surface hardness 58-60 Rc Core strength V950 /2

2 completely burnished and precision-ground Shape C1 right d1 b1 b2 b3 h1 h5 h6 l1 l2 20 52 27 13 16 25

50 100 50 26 32 35 60 16 100 446021 0050 4134 Shape C2 left d1 b1 b2 b3 h1 h5 h6 l1 l2 20 65 40 26 16 25

0040 50 105 55 30,5 32 35 60 16 100 446023 0050 4134 Shape C3 for overhead work right d1 b1 b2 b3 h1 h5

48 42,5 12,5 85 446025 0040 50 100 50 26 32 60 50 16 100 446025 0050 4134 Shape C4 for overhead work

0030 40 90 47,5 25,5 25 48 42,5 12,5 85 446027 0040 50 105 55 30,5 32 60 50 16 100 446027 0050 4134 Tool

precision-ground Shape E1, for drilling tools with cylindrical shank and internal coolant supply d1

20 68 40 28 22 67 45 446031 3020 30 25 68 45 28 22 71 49 446031 3025 30 32 68 52 28 22 75 54 446031 3032

100 Shape 4 for overhead work left, short d1 b1 b2 b3 h1 h5 h6 l1 l ,5 12, , Square axial tool holder Surface hardness Rc Core strength V950 /2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground Shape C1 right d1 b1 b2 b3 h1 h5 h6 l1 l , , , Shape C2 left d1 b1 b2 b3 h1 h5 h6 l1 l ,5 25, , , , Shape C3 for overhead work right d1 b1 b2 b3 h1 h5 h6 l1 l , ,5 12, Shape C4 for overhead work left d1 b4 b5 b6 h1 h5 h6 l1 l ,5 25, ,5 12, , Tool holders for drilling tools Surface hardness Rc Core strength V950 / 2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground Shape E1, for drilling tools with cylindrical shank and internal coolant supply d d4 d3 d2 h1 l1 l2 l , , , ,

Shape E2, for turning tools with cylindrical shank as well as internal and external coolant supply d1 d4 d3 d2 h1 l1 l2 l3 20 8 50 40 23 18 50 42 446033 2008 20 10 50 40 23 18 50 42 446033 2010 20 12

446033 3010 30 12 68 55 25 22 60 38 446033 3012 30 16 68 55 25 22 60 38 446033 3016 30 20 68 55 28 22 60 38 446033 3020 30 25 68 55 28 22 60 38 446033 3025 30 32 68 68 28 22 75 53 446033 3032 30 40

22 75 53 446033 4020 40 25 83 55 32,5 22 75 53 446033 4025 40 32 83 83 32,5 22 75 53 446033 4032 40 40 83 83 32,5 22 90 68 446033 4040 50 12 98 68 35 30 90 60 446033 5012 50 16 98 68 35 30 90 60

101 Shape E2, for turning tools with cylindrical shank as well as internal and external coolant supply d1 d4 d3 d2 h1 l1 l2 l , , , , , , , , Collet holder for collets as per I 6388 (OZ) Surface hardness Rc Core strength V950 / 2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground When selecting the collets, preferably use shape. Type E3, with cylindrical seat by means of collet d1 esignation range d3 h1 ll prices in euro, VT excluded l2 l E / 415E E / 415E E / 462E E / 462E , E / 467E , E / 462E E / 467E Collet holder for collets as per I 6499 (ER) Surface hardness Rc Core strength V950 / 2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground additional versions available on request When selecting the collets, preferably use shape. Shape E4, with cylindrical seat by means of the collet d1 esignation range d3 h1 l2 l1 20 ER16 426E ER25 430E ER32 470E ER25 430E ER32 470E ER40 472E ER25 430E , ER32 470E , ER40 472E , ER40 472E Prices in bold print = delivery ex stock

Thread cutting quick-change chuck with automatic locking of the inserts in the chuck Elastic push and pull longitudinal displacement d ength compensation, pressure ength compensation, tension VI 30

For threading dies Synchronised thread cutting using threading dies on CC machines Cooling lubricant discharged through threading dies (IC) = optimum lubrication Supplied without threading die Thread

4135 4135 VI base holder For holding threading die interchangeable inserts VI 20 442014 0020 VI 30 442014 0030 VI 40 442014 0040 4135 M1 - M2.

interchangeable inserts Morse taper socket Surface hardness 58-60 Rc Core strength V950 / 2 ardness depth 0.8 ± 0.

102 Thread cutting quick-change chuck with automatic locking of the inserts in the chuck Elastic push and pull longitudinal displacement d ength compensation, pressure ength compensation, tension VI M 3 - M VI M 5 - M VI M 3 - M VI M 5 - M Threading die holder Synchro For threading dies Synchronised thread cutting using threading dies on CC machines Cooling lubricant discharged through threading dies (IC) = optimum lubrication Supplied without threading die Thread Complete holder with straight shank with clamping surface suitable for cutting insert External Ø Threading die interchangeable inserts For VI base holders suitable for threading die External Ø max. depth For shank Ø 16 max. depth Ø 20 M3 - M M5 - M M7 - M M M12 - M VI base holder For holding threading die interchangeable inserts VI VI VI M1 - M M M12 - M M16 - M M3 - M M5 - M M7 - M ase holders with interchangeable inserts Morse taper socket Surface hardness Rc Core strength V950 / 2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground Shape F1, for tools with morse taper and tangs d interior d3 d4 d2 h1 l1 l2 20 VI 20 MK , VI 20 MK , VI 30 MK , VI 30 MK , VI 30 MK , VI 40 MK , , VI 40 MK , , VI 40 MK , , VI 40 MK , , VI 50 MK , VI 50 MK , VI 50 MK ,

Protective plugs Shape Z2, steel esign d1 h1 With additional surface at the bottom 20 23 56 16 50 446039 0020 With additional

l2 d2 Steel Shape Z2, plastic d1 d2 h1 l1 l2 Plastic 20 50 23 56 16 446040 2055 30 68 28 75 20 446040 3080 40 83 32,5 83 20 446040

not necessary Standard jaws with fl uted clamping surfaces for greater holding force all wear parts are hardened Easy to use

standard jaws and centring bush R, for lathes with clockwise rotating spindle width height Clamp width C max.

103 Protective plugs Shape Z2, steel esign d1 h1 With additional surface at the bottom With additional surface at the bottom Standard 40 32, Standard l1 l2 d2 Steel Shape Z2, plastic d1 d2 h1 l1 l2 Plastic , CC bar gripper Combination of bar gripper and parting-off tool, a revolver head station is thus not necessary Standard jaws with fl uted clamping surfaces for greater holding force all wear parts are hardened Easy to use standard lathe parting-off tools (shank must be shortened) and coercially available hard metal plates Supplied with a set of standard jaws and centring bush R, for lathes with clockwise rotating spindle width height Clamp width C max. E igh quality for great performance. -Cut recessing systems by TOR: high-quality materials a flexible system for various application ranges quick exchange of the recessing tools This is but one example of TOR s high-quality turning tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Powered tools for CC lathes Tools for complete production on CC lathes

for axial or radial machining using a wide variety of tool holders

coon CC lathes suitable for powered tools o full envelopment from

equipment costs thanks to the lack of need for the second clamping,

Sandvik Capto, S, internal or external coolant supply systems,

104 Powered tools for CC lathes Tools for complete production on CC lathes rilling, milling and thread cutting in a single clamping process, Tools for axial or radial machining using a wide variety of tool holders German quality production with an internal repair service Use on all coon CC lathes suitable for powered tools o full envelopment from turning to milling, Tools of a wide variety of designs, Reduced equipment costs thanks to the lack of need for the second clamping, dherence to extremely strict form and position tolerance values, as the workpiece is produced in a single clamping process rive: I 5482 e.g. Sauter disc-type turret vailable for delivery: Modular systems such as Sandvik Capto, S, internal or external coolant supply systems, high-speed transmission, collets, Weldon and Wistle otch, milling arbors, threading chucks etc. Custom solutions on request rive: I dihedral shank with diameter 40 rive: I 5480 e.g. Sauter disc-type turret rive: I 1809 e.g. uplomatic turret You can use our enquiry checklist for an individual offer for powered tools. The PF is available for download at

Powered tools with quick-change system The 'easy-quick' quick change

adjustments to be made when changing tools Modular systems such as Sandvik

version) Transverse slot shell holder Collet chuck (short version) Collet

tools for machining centres igh-performance powered tools in machining

ngle, drilling and milling head, 360 rotatable ngle, drilling and milling

105 Powered tools with quick-change system The 'easy-quick' quick change system with adjustment and replacement precision of 5μ for turning and machining centres. igh degree of flexibility Extremely short tooling times o time-consuming adjustments to be made when changing tools Modular systems such as Sandvik Capto, S also available for delivery Milling cutter holder I 6359 (long version) Transverse slot shell holder Collet chuck (short version) Collet chuck (long version) Milling cutter holder I 6359 (short version) Powered tools for machining centres igh-performance powered tools in machining centres for higher efficiency and increasing precision of production sites. ngle, drilling and milling head, 360 rotatable ngle, drilling and milling head, ± 90 tiltable, 360 rotatable ngle, drilling and milling head ll prices in euro, VT excluded Prices in bold print = delivery ex stock

I/ISO 26623-1-compliant polygon tool holders Surface hardness 58-60 Rc Core strength V950 /2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground Taper surface precision max.

1 2 3 EPS 63 63 90 29 10 41 33 20 100 90 446051 6309 EPS 63 63 110 32 13 50 33 25 130 112 446051 6311 4134 Tool holder axial left design 1 f 1 2 3 EPS 63 63 90 29 10 41 33 20 100 90 446052 6309 EPS

106 I/ISO compliant polygon tool holders Surface hardness Rc Core strength V950 /2 ardness depth 0.8 ± 0.2 completely burnished and precision-ground Taper surface precision max. 1 μm Tool holder radial design 1 b h EPS EPS EPS Tool holder axial right design 1 f EPS EPS Tool holder axial left design 1 f EPS EPS Triplex tool holder axial right design 1 f b EPS Triplex tool holder axial left design 1 f b EPS uplex tool holder axial design 1 b1 EPS Tool holder 45 right design 1 f 1 2 EPS , Tool holder 45 left design 1 f 1 2 EPS , rill holder form E2 design d 1 EPS EPS

Quick-release tool holder Profi le-ground, toothed central body that is attached along with the base body to the support on the lathe The base body can accoodate an unlimited number of change holders

01 The hole R in the centring screw must be enlarged to match the dimension of the clamping screw! Technical ata a C 1 Change toolholder size 12 16 20 25 32 32 40 45 40 50 63 riving power max.

107 Quick-release tool holder Profi le-ground, toothed central body that is attached along with the base body to the support on the lathe The base body can accoodate an unlimited number of change holders one after the other for turning or drilling tools. 40 diff erent possible angle settings for the tool holder Precision ± 0.01 The hole R in the centring screw must be enlarged to match the dimension of the clamping screw! Technical ata a C 1 Change toolholder size riving power max. kw 1,1 2,2 2,2 6,6 6,6 13,2 13,2 13, Max. carriage width Z Min. centers height from carriage X 18,2 25,1 30, , ,5 70,5 83,5 Max. centers height from carriage X ight adjustability h Tool repose Y 6,2 9,1 10, , ,5 20,5 20,5 Max. tool height Total width V Total height S Max. distance U oring Ø max. T Min. necessary size X for toolholder a C 1 Change toolholder size Tool height X min ( 14 ) ( 30 ) Quick change tool holder head with eccentric clamping Supplied with eccentric lever and square key for the holder further versions with other bore holes available on request older size ll prices in euro, VT excluded / / / C/ / Prices in bold print = delivery ex stock

Quick-release lathe tool holder Flat tool support Supplied with lockable height-adjustment screw and clamping screws suitable for holder size Total length suitable quadratic-head bolt 12 50 M5 x 0.

2226 32 120 M11 x 1 x 30 446505 2232 32 140 M11 x 1 x 30 446505 2233 C 32 150 M14 x 1,5 x 40 446505 3332 C 32 170 M14 x 1,5 x 40 446505 3333 C 40 150 M14 x 1,5 x 40 446505 3340 C 40 170 M14 x 1,5 x

108 Quick-release lathe tool holder Flat tool support Supplied with lockable height-adjustment screw and clamping screws suitable for holder size Total length suitable quadratic-head bolt M5 x 0.8 x M7 x 1 x M7 x 1 x M7 x 1 x M7 x 1 x M11 x 1 x M11 x 1 x M11 x 1 x M11 x 1 x C M14 x 1,5 x C M14 x 1,5 x C M14 x 1,5 x C M14 x 1,5 x C M14 x 1,5 x M14 x 1,5 x M14 x 1,5 x M14 x 1,5 x Quick-release boring insert holder with prism For boring bars and other cylindrical shank tools Supplied with lockable height-adjustment screw and clamping screws suitable for holder size for boring bar Ø Total length suitable quadratic-head bolt M5 x 0.8 x M7 x 1 x M11 x 1 x C M14 x 1,5 x C M14 x 1,5 x M14 x 1,5 x Insertion prism P for holding small boring bars and boring inserts in quick change boring insert holder suitable for holder size Total length max. Ø C C Quick-release boring-bar holder S with cylindrical bore hole for morse taper sleeves and for direct holding of boring bars Supplied with lockable height-adjustment screw and clamping screws Steel tool holder blanks available on request suitable for holder size for boring bar Ø Total length C C Morse taper sleeve with jacking bolt for holding in quick-release boring-bar holder S, cylindrical outer diameter for tools with morse taper shank suitable for holder size Ø design interior 30 MK MK MK MK C 40 MK C 40 MK C 50 MK C 50 MK C 50 MK MK

Return tool holder FG, for outside thread The return motion lever can be unscrewed from the thread without adjusting the cross support. Only the new cutting depth has to be readjusted.

parting-off tool TS suitable for holder size suitable for Parting-off tool TS Parting-off tool TS 2.5 x 10.0 446540 0001 Parting-off tool TS 2.7 x 10.0 446540 1180 Parting-off tool TS 4.2 x 15.

109 Return tool holder FG, for outside thread The return motion lever can be unscrewed from the thread without adjusting the cross support. Only the new cutting depth has to be readjusted. suitable for holder size ift C Return tool holder FI, for inside thread suitable for holder size Quick-release parting-off tool holder S for parting-off tool TS suitable for holder size suitable for Parting-off tool TS Parting-off tool TS 2.5 x Parting-off tool TS 2.7 x Parting-off tool TS 4.2 x C Parting-off tool TS 5.1 x kg 2,5 10 0, ,7 10 0, ,2 15,9 0, ,1 18,5 0, oring bar For quick-release holder with cylindrical hole side slit, one side straight and one side curved suitable for holder size Ø ift C Total length C C Spare parts for quick-change steel holders suitable for holder size Square socket wrench Console with nuts and bolts eight-adjustment screw eight adjustment nut Fastening screw for console Square-head bolt C Spare parts for quick-change steel holder head suitable for holder size Eccentric bolts ll prices in euro, VT excluded Protective cover with scale Centring disc Eccentric wrench Retaining strap with eccentric bolt Plunger Injection spring Prices in bold print = delivery ex stock Pointer C

Revolver head for lathes precision production due to high repeatability and indexing accuracy (0.

depends on the following parameters: driving power of the lathe, tool slide width C, turning tool height Upgrade your lathe. ow with setup service. Contact us!

kw per unit kg R1 20 30 90-100 84 80 180 M14 x 2 21 3,7 3,5 446601 0101 R2 25 40 110-150 106 102 240 M16 x 2 25 7,4 6,5 446601 0201 R3 40 60 150-180 134 133 300 M20 x 2.

screw with interior bore, cooling hose, connecting piece, winding piece, locking screw Type 40-110 C E G J K rive power max.

110 Revolver head for lathes precision production due to high repeatability and indexing accuracy (0.005 ) various production options (40 tool positions, 9 spacing possible) quick height adjustment via adjusting screw extremely fl exible due to modular design Selection of the correct revolver head depends on the following parameters: driving power of the lathe, tool slide width C, turning tool height Upgrade your lathe. ow with setup service. Contact us! Quadruple revolver head Supplied with cranked box spanner and chuck key Type C E G J K rive power max. kw per unit kg R M14 x ,7 3, R M16 x ,4 6, R M20 x , R M24 x Quadruple revolver head with internal cooling Supplied with pipe spanner, socket spanner, chuck key, clamping screw with interior bore, cooling hose, connecting piece, winding piece, locking screw Type C E G J K rive power max. kw per unit kg R1+IK M14 x ,7 3, R2+IK M16 x ,4 6, R3+Ik M20 x , R4+IK M24 x , ouble universal clamp Supplied with cranked box spanner and socket wrench Type C E G J K rive power max. kw kg U M14 x ,7 3, U M16 x ,4 6, U M20 x , Quick-release mounting W Internal and external machining Type suitable for O P R S U kg W 1/12 R1/R1+IK/U , W 1/20 R1/R1+IK/U , W 2/25 R2/R2+IK/U , W 3/32 R3/R3+IK/U W 3/40 R3/R3+IK/U , W 4/40 R4/R4+IK W 4/50 R4/R4+IK Quick-release mounting W 4136 Machining on the inside Type suitable for O P R S U kg W 1/12 R1/R1+IK/U , W 1/20 R1/R1+IK/U , W 2/25 R2/R2+IK/U , W 3/32 R3/R3+IK/U , W 3/40 R3/R3+IK/U , W 4/40 R4/R4+IK , W 4/50 R4/R4+IK

111 Quick-release mounting WP for boring bars Type suitable for O P R S U kg WP 1/12 R1/R1+IK/U , WP 2/25 R2/R2+IK/U , WP 3/32 R3/R3+IK/U , WP 4/40 R4/R4+IK , Quick-release mounting W for clamping sleeves Type suitable for O P R S U kg W 1/30 R1/R1+IK/U , W 2/40 R2/R2+IK/U , W 3/40 R3/R3+IK/U , W 3/50 R3/R3+IK/U , W 4/60 R4/R4+IK sleeves morse taper suitable for External Ø design interior W 1/30 30 MK W 1/30 30 MK W 2/40, W 3/40 40 MK W 2/40, W 3/40 40 MK W 3/50 50 MK W 3/50 50 MK W 4/60 60 MK W 4/60 60 MK sleeves cylindrical, slotted suitable for External Ø Interior Ø W 1/ W 1/ W 1/ W 1/ W 1/ W 1/ W 1/ W 2/40, W 3/ W 2/40, W 3/ W 2/40, W 3/ W 2/40, W 3/ suitable for External Ø Interior Ø W 2/40, W 3/ W 2/40, W 3/ W 2/40, W 3/ W 3/ W 3/ W 3/ W 3/ W 4/ W 4/ W 4/ Quick-release mounting WR External machining Type suitable for ll prices in euro, VT excluded O P R S U kg WR 1/12 R1/R1+IK/U , WR 1/20 R1/R1+IK/U , WR 2/25 R2/R2+IK/U , WR 3/32 R3/R3+IK/U , WR 3/40 R3/R3+IK/U , WR 4/40 R4/R4+IK , WR 4/50 R4/R4+IK Quick-release mounting WW lank Type suitable for O P kg WW 1/30 R1/R1+IK/U , WW 2/40 R2/R2+IK/U , WW 3/40 R3/R3+IK/U , WW 3/50 R3/R3+IK/U , WW 4/60 R4/R4+IK Prices in bold print = delivery ex stock

Rotary tables Complete with MC MII i control system Rotary tables with control unit for use at conventional milling machines and CC machining centres Possible connection to CC machining centres with

pneumatic and hydraulic chucks, tailstocks, thrust bearings, collet chucks and multi-clamping devices are available on request ll C rotary tables with a separate Mac Mini i have an absolute system

Two-line C display The complete set is shown on the C display. Further information can be requested, e.g. parameter data, error message, input and output data including a short description.

ness and accuracy patented braking mechanism and revised piston design ensure extremely high clamping forces o hydraulic supply necessary pneumatic clamping circuit Precision ± 2 sec.

112 Rotary tables Complete with MC MII i control system Rotary tables with control unit for use at conventional milling machines and CC machining centres Possible connection to CC machining centres with free M-function also available as a version for use as direct fourth axis on request Spindle and worm gear hardened and ground, play re-adjustable stepless speed adjustment ccessories: Manual, pneumatic and hydraulic chucks, tailstocks, thrust bearings, collet chucks and multi-clamping devices are available on request ll C rotary tables with a separate Mac Mini i have an absolute system Installation of a 17-bit absolute encoder means the machine zero point no longer has to be approached after switching on the Mac Mini i. The machine zero point can be approached manually. Two-line C display The complete set is shown on the C display. Further information can be requested, e.g. parameter data, error message, input and output data including a short description. Optional hand wheel available removable control element 1 Rotary table GTM-R40 with Mac Mini i control suitable for vertical and horizontal use Improved structural design for maximum torsional stiff ness and accuracy patented braking mechanism and revised piston design ensure extremely high clamping forces o hydraulic supply necessary pneumatic clamping circuit Precision ± 2 sec. Indexing accuracy ± 10 sec. model force m Rotational speed max. r/min Workpiece weight max. horizontal kg Workpiece weight max. vertical kg max. Ø 1 kg GTM200-R GTM250-R GTM320-R Rotary table MRM-R40 with Mac Mini i control suitable for vertical and horizontal use Casing made of high-quality grey cast iron, machined on all sides Pneumatic disc clamping unit Precision ± 2 sec. Indexing accuracy ± 10 sec. model force m Rotational speed max. r/min Workpiece weight max. horizontal kg Workpiece weight max. vertical kg max. Ø 1 kg MRM120R MRM160R , MRM200R , MRM250R , MRM320R

Thrust bearings, clamped pneumatically for rotary table MRM120 also for MRM 160/200 (with base unit)

pneumatic (0.6 MPa) m force hydraulic (3.

screws with exchangeable centre MK3 model Point height Groove dimensions device TS160 120 187 448050

Supplied with slot nuts and fastening screws Point height ll prices in euro, VT excluded Groove

113 Thrust bearings, clamped pneumatically for rotary table MRM120 also for MRM 160/200 (with base unit) for MRM 250/320 and hydraulic clamping available on request model Point height Through-hole force pneumatic (0.6 MPa) m force hydraulic (3.5 MPa) m TSR Manual tailstock Supplied with slot nuts and fastening screws with exchangeable centre MK3 model Point height Groove dimensions device TS TS TS TS Tailstock Supplied with slot nuts and fastening screws Point height ll prices in euro, VT excluded Groove dimensions device Prices in bold print = delivery ex stock

Precision clamp With quick adjustment highest accuracy made of alloyed tool steel, hardened and fi ne ground on all sides Simple clamping and releasing with hollow hexagon wrench jaw can be adjusted

demand the highest clamping accuracy horizontal prism Jaw width Clamp width Jaw height Total height Total length Perpendicularity Parallelism 34 25 15 35 75 0,005 2 463004 0030 45 50 20 45 110 0,005

463006 0070 90 120 40 80 210 0,005 2 463006 0090 120 150 40 90 280 0,005 2 463006 0120 4104 Precision clamp highest accuracy made of alloyed tool steel, hardened and fi ne ground on all sides and

demand the highest clamping accuracy Jaw width Clamp width Jaw height Total height Total length Perpendicularity Parallelism μm 60 55 25 50 110 0,005 0,002 463021 0060 73 100 30 67 210 0,005 0,002

114 Precision clamp With quick adjustment highest accuracy made of alloyed tool steel, hardened and fi ne ground on all sides Simple clamping and releasing with hollow hexagon wrench jaw can be adjusted in steps, automatic engagement Pull-down eff ect Suitable for grinding, milling and engraving machines, jig boring machines, measuring and inspection tasks as well as for all production process which demand the highest clamping accuracy horizontal prism Jaw width Clamp width Jaw height Total height Total length Perpendicularity Parallelism , , horizontal and vertical prism (size 0120 only horizontal prism) Jaw width Clamp width Jaw height Total height Total length Perpendicularity Parallelism , , , Precision clamp highest accuracy made of alloyed tool steel, hardened and fi ne ground on all sides and loosening via threaded spindle horizontal prism Suitable for grinding, milling and engraving machines, jig boring machines, measuring and inspection tasks as well as for all production process which demand the highest clamping accuracy Jaw width Clamp width Jaw height Total height Total length Perpendicularity Parallelism μm ,005 0, ,005 0, ,005 0, Precision vices Pull-down fi xture One-piece vice bed and fi xed jaw ngularity and parallelism /100, can be used on all sides alloyed tool steel, hardened and fi ne ground, hardness Rc Jaw width ength Jaw opening Jaw height Precision-grinding and checking vices with spindle Made entirely of steel, precision ground on all sides, can be used on all four sides, hardness Rc58-62, Can be used at grinding machines, jig boring machines as well as other precision machinery lso for other measuring and inspection tasks Tolerance Jaw width ength Jaw opening Jaw height

Precision angled vice SPS-2 Machining and checking surfaces and angular surfaces ngle adjustment in 2 axes via Vernier scale and precision set screw can be rotated horizontally through 360 can be

01/300 Jaw width Clamp width Jaw height ength eight kg 70 80 30 160 137 12 459026 0070 4167 Parallel vice forged steel opening at the front hidden spindle Ground anvil and work top ardened and milled

grey cast iron opens to the rear Trapezoidal thread spindle protected against dust Ground anvil Reversible steel jaws, 1 side grooved, 1 side smooth aer-fi nish paint blue (available in green on

magnets Material: extruded aluminium Type of rough to medium fi ne machined workpieces, grooves on the clamping surfaces guarantee optimum clamping of irregular workpieces Type P of variously shaped

115 Precision angled vice SPS-2 Machining and checking surfaces and angular surfaces ngle adjustment in 2 axes via Vernier scale and precision set screw can be rotated horizontally through 360 can be swivelled through 2x60 Scale reading from vernier 3 Tool steel through-hardened, fully precision-ground Perpendicularity: 0.005/100 Parallelism: 0.01/300 Jaw width Clamp width Jaw height ength eight kg Parallel vice forged steel opening at the front hidden spindle Ground anvil and work top ardened and milled jaws Sliding parts hardened and ground aer-fi nish paint blue Jaw width range depth kg Parallel vice igh-quality grey cast iron opens to the rear Trapezoidal thread spindle protected against dust Ground anvil Reversible steel jaws, 1 side grooved, 1 side smooth aer-fi nish paint blue (available in green on request) Jaw width range depth kg Magnetic vice jaw Compatible with all vice models with integrated permanent magnets Material: extruded aluminium Type of rough to medium fi ne machined workpieces, grooves on the clamping surfaces guarantee optimum clamping of irregular workpieces Type P of variously shaped workpieces, a 90 milled recess in the upper part of the jaw enables the easy horizontal clamping of fl at workpieces, the jaws are equipped with a horizontal 120 prism and three vertical 120 prisms of various sizes for round and oval workpieces Type F of fi ne machined workpieces, the clamping surfaces consist of fi bres which are not deformed when clamping hot workpieces further jaw widths from as well as rubber and felt types available on request ll prices in euro, VT excluded Jaw width Type, smooth pair Type P, prism pair Type F, fibre pair Type Type F Prices in bold print = delivery ex stock Type P

116 O U VEU UEVO Protective jaws for vices For parallel vices with replaceable inserts Made of diff erent materials EW UOVO Y Protective jaw holder Polyamide inserts luminium inserts Fibre inserts Polyamide inserts Steel prism inserts, smooth Jaw width Jaw width Jaw width Jaw width Jaw width Jaw width Key to steel pocket book Useful information on steel Materials science, materials testing Key to steel extract Steel identifi cation systems, dimensions and units Mathematics and geometry, tables bbreviations for standards designations / standardisation institutes ist of Werkstoff numbers in numerical order escription Key to steel pocket book, plastic cover, 200 pages. I

rilling vice jaws with bearing surfaces for clamping fl at workpieces For round material, horizontal and vertical V-blocks integrated into the fi xed

rectangular supporting surfaces clamping on three sides (base, right-hand und face) jaws with bearing surfaces for clamping fl at workpieces For round

quick and secure clamping, particularly during series machining of workpieces With guideway, base and side clamping device, also suitable for light

clamping force 10 k positive locking wide clamping range ody made of special casting Supplied with guideway and fi xing material Jaw width Clamp width

117 rilling vice jaws with bearing surfaces for clamping fl at workpieces For round material, horizontal and vertical V-blocks integrated into the fi xed jaw Jaw width Clamp width rilling vice Version with two additional, rectangular supporting surfaces clamping on three sides (base, right-hand und face) jaws with bearing surfaces for clamping fl at workpieces For round material, horizontal and vertical V-blocks integrated into the fi xed jaw Jaw width Clamp width rilling vice narrow design For quick and secure clamping, particularly during series machining of workpieces With guideway, base and side clamping device, also suitable for light milling jobs Single-handed operation quick jaw adjustment and clamping with just one lever handle fl at, robust design max. clamping force 10 k positive locking wide clamping range ody made of special casting Supplied with guideway and fi xing material Jaw width Clamp width ll prices in euro, VT excluded max. clamp force k 1 kg , Prices in bold print = delivery ex stock

Workpiece stop adjustable in 5 axes for use at drilling and milling machines

Workpiece stop with T-slot nuts 12 and 14 466597 0001 4139 esignation T-slot nut

466594 0018 T-slot nut 22 466594 0022 4139 Workpiece stop magnetic practical

times which reduces downtimes simple, but eff ective application small,

118 Workpiece stop adjustable in 5 axes for use at drilling and milling machines quick, fl exible, robust With T-slot nuts 12 and 14 with M8 thread esignation Workpiece stop with T-slot nuts 12 and esignation T-slot nut T-slot nut T-slot nut T-slot nut T-slot nut Workpiece stop magnetic practical design with enormous holding force exact fi xing of workpieces Short assembly times which reduces downtimes simple, but eff ective application small, space-saving design imensions 113 x 47 x igh quality for great performance. djustable wrenches by TOR: innovative combination of materials perfect feel best resilience exact adjustment This is but one example of TOR s high-quality hand tools

119 Exchangeable jaws suitable for every machine vice via individual positioning of the fixing bore holes force max. 40 k Coercially available underlay bars can be used Secure installation of the underlay bars via magnets Easy to clean Prices per pair / incl. magnets Six magnets included in scope of delivery Grip jaw fine reduced clamping depth (min. 1.5 ) ength eight Grip jaw coarse reduced clamping depth (min. 3 ) ength eight Pull-down jaw grip reduced clamping depth (min. 8 ) ength eight Pull-down jaw smooth reduced clamping depth (min. 6 ) optimum parallelism due to pull-down ength eight Gripper jaws with support bar ardened tool steel Variable support height 3 and 5 For vice types TOR MM-G Röhm RKG-M, RK, RKE llmatic asic O U VEU UEVO EW UOVO Y Supplied with hexagon socket key Jaw width ll prices in euro, VT excluded Prices in bold print = delivery ex stock

O U VEU UEVO Precision parallel underlays sets all surfaces ground plane parallel, square and in pairs Tolerance height ± 0.

eight 8 pairs 120 8 12, 17, 22, 25, 28, 32, 36, 38 465002 1208 8 pairs 160 8 12, 17, 22, 25, 28, 32, 36, 38 465002 1608 9 pairs 100 4 10, 14, 18, 22, 26, 30, 34, 38, 42 465002 1004 9 pairs 160 4 10,

5 with - thus enabling drill holes near to the vice jaw EW UOVO Y Jaw width Contents per set 100 eight 20, 27, 29, 31, 32 465006 0100 125 eight 15, 30, 35, 37, 39 465006 0125 160 eight 22, 30, 37,

120 O U VEU UEVO Precision parallel underlays sets all surfaces ground plane parallel, square and in pairs Tolerance height ± ardness 58 ±2 RC for height adjustment when clamping workpieces, particularly suitable for seating in machine vices, marking tables or machine tools Supplied in wooden box Contents ength Width eight 8 pairs , 17, 22, 25, 28, 32, 36, pairs , 17, 22, 25, 28, 32, 36, pairs , 14, 18, 22, 26, 30, 34, 38, pairs , 14, 18, 22, 26, 30, 34, 38, Parallel underlay sets, magnetic ardened tool steel urnished Tolerance height ± with - thus enabling drill holes near to the vice jaw EW UOVO Y Jaw width Contents per set 100 eight 20, 27, 29, 31, eight 15, 30, 35, 37, eight 22, 30, 37, 42, Parallel underlays sets In wooden support aged steel, case-hardened and ground in pairs Tolerance height/width: ± 0.01, machined plane parallel and angle correct the cross section is displayed on the ground front face for parallel holding of workpieces in machine vices, marking tables or machine tools for drilling, grinding, milling, planning, marking and measuring, especially suitable for holding machine vices, marking tables or machine tools ength Pair/set increasing at intervals of Pair, Pair, 8-42, (except 9 ) 24 Pair, 8-42, (except 9 ) Cross section 2x 5 2x10 2x15 2x20 3x 6 ; 3x11 3x16 3x21 4x 7 4x12 ; 4x17 4x22 5x 8 5x13 5x18 ; 5x23 6x 9 6x14 6x19 6x x11 8x16 8x21 8x26 8x31 8x36 ; 10x13 10x18 10x23 10x28 10x33 10x38 ; 12x15 12x20 12x25 12x30 12x35 12x40 ; 14x17 14x x27 14x32 14x37 14x42 8x11 8x16 8x21 8x26 8x31 8x36 ; 10x13 10x18 10x23 10x28 10x33 10x38 ; 12x15 12x20 12x25 12x30 12x35 12x40 ; 14x17 14x x27 14x32 14x37 14x Safety at the workplace Please protect your eyes, hearing and respiratory organs! Ear protectors Starting on page Safety goggles Starting on page reathing protection apparatus Starting on page

Precision machine vice Mechanical precision vice ccuracy to 0.

F G kg 125 40 150 345 410 40 95 16 12,9 460200 0125 150 50 200 420 500 50 125 16 25,5 460200 2150 150 50 300 520 600 50 125 16 29 460200 3150 175 60 200 455 530 58 145 16 37 460200 2175 175 60 300

460200 3300 300 80 400 735 830 78 195 16 140 460200 4300 Indexable turning insert with graduation 4170 suitable for jaw width ngle precision 125 1 460222 0125 150 1 460222 0150 175 1 460222 0175 200

121 Precision machine vice Mechanical precision vice ccuracy to 0.02 ase body made of hardened steel 60 Rc fi xed jaw can be rotated 180, equipped with a jaw step Supplied with stop, clamping jaws, slot nuts 16 x 16 and chuck key C ll prices in euro, VT excluded E F G kg , , Indexable turning insert with graduation 4170 suitable for jaw width ngle precision Slot nuts 4171 Prism jaw Coordinate V-jaw Groove dimensions device jaw extra high Pull-down jaw Groove dimensions machine suitable for jaw width suitable for jaw width suitable for jaw width suitable for jaw width Prices in bold print = delivery ex stock

Precision machine vice mechanical/mechanical or mechanical/hydraulic ase body and clamping jaw carrier made of high-quality ductile iron E-GJS-700-2 precision for the same clamping pressure within 0.

wear parts, clamping jaws and guideways hardened and ground (60 Rc) Multiple vices of the same height are available with a pair consistency within 0.

122 Precision machine vice mechanical/mechanical or mechanical/hydraulic ase body and clamping jaw carrier made of high-quality ductile iron E-GJS precision for the same clamping pressure within 0.01 rough setting of the two clamping areas in a matter of seconds via bolts (clamping ranges with cover) ligning on the work table via longitudinal or transverse slots (207) in the basic surface all wear parts, clamping jaws and guideways hardened and ground (60 Rc) Multiple vices of the same height are available with a pair consistency within 0.01 Spindle can be replaced with a pneumatic/hydraulic version Supplied with 1 pair of smooth jaws, 1 hand crank, without indexable turning insert Jaw width Clamp force k range E F kg mech./hydr. mech./mech Indexable turning insert ote: ngular accuracy is only guaranteed for purchases including the vice! Jaw width Indexable turning insert Precision machine vice mechanical/hydraulical ase body made of steel ardened and ground guideways ligning on the work table via longitudinal or transverse slot 20 7 Quick adjustment via bolts force adjustment allows quick pre-setting of clamping force Supplied with 1 set of smooth jaws, 4 clamping jaws and hand crank Vice Jaw width Clamp force k 1 h h1 S Indexable turning insert Jaw width b

C compact clamp MM-G mechanical/mechanical ase body made of spheroidal graphite iron clamping on base Pull-down jaw and other accessories available on request Stepped jaws, reversible, hardened and

123 C compact clamp MM-G mechanical/mechanical ase body made of spheroidal graphite iron clamping on base Pull-down jaw and other accessories available on request Stepped jaws, reversible, hardened and ground ong chucking slide assembly with transverse slot drive screw with pre-set clamping force Mounting thread M12 for workpiece stop surfaces for clamping claws Stable chip guard, prevents chips from entering inside the body Compact spanner incl. stepped jaws and regulator Jaw width Clamp force k range kg ,5 112, jaw with bolt and T-slot nut T-slot size Thread 12 M10 x M12 x M12 x M16 x M16 x M16 x Standard top jaws Price per PU = 1 set Width eight Stepped jaws Price per PU = 1 set Width eight Sliding jaw set for grip attachments Price per PU = 1 set Width eight Grip attachments ll prices in euro, VT excluded Prices in bold print = delivery ex stock

C high-pressure clamp ighine mechanical/mechanical a base body for two clamping systems Mechanical power booster (toggle mechanism) with pre-set clamping force (10K; 20K; 30K; 40K) ase body made of

124 C high-pressure clamp ighine mechanical/mechanical a base body for two clamping systems Mechanical power booster (toggle mechanism) with pre-set clamping force (10K; 20K; 30K; 40K) ase body made of spheroidal graphite iron 60 Guideways and basic surface inductive hardened Series Fixed and mobile jaws are hardened and precision-ground to RC Telescopic cover prevents the ingress of dirt and swarf incl. stepped jaws, hand crank, spindle chamber cove, 1 pair of fi tting T-nuts with screws, 4 clamping jaws Type Jaw width Total length eight range Clamp force k kg Groove dimensions device G Series Pendulum jaw and fi xed jaw for holding various exchangeable grip inserts optimum clamping of round and irregularly shaped workpieces via pendulum jaws Incl. pendulum jaws and fi xed jaws, hand crank, spindle chamber cover, 1 pair of fi tting T-nuts with screws, 4 clamps, without grip attachments Type Jaw width Total length eight range Clamp force k kg Groove dimensions device G , G , G , Stepped jaws set included in the scope of delivery for the series for type Jaw width /G /G /G lock jaw set for type Jaw width /G /G /G

Sliding jaw set For holding grip attachments (not included) for type Jaw width /G 100 160 458930 0100 /G 130 190 458930 0130 /G160 220 458930 0160 4145 Sliding jaw set with pendulum jaw Included in

0130 /G 160 220 458940 0160 4145 eight Smooth 11 458950 1101 With cutting edges 11 458950 1102 Smooth 19 458950 1901 With cutting edges 19 458950 1902 Smooth 24 458950 2401 With cutting edges 24

125 Sliding jaw set For holding grip attachments (not included) for type Jaw width /G /G /G Sliding jaw set with pendulum jaw Included in the standard scope of delivery for the G series For holding grip attachments (not included) for type Grip attachments Prices per set of 4 units Type Jaw width /G /G /G eight Smooth With cutting edges Smooth With cutting edges Smooth With cutting edges With clamping claw Smooth, with adjusting screw With cutting edges, with adjusting screw Smooth, soft Smooth, with adjusting screw With cutting edges, with adjusting screw Smooth, with height overlay With cutting edges, with height overlay ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Machine vice Euroine Type E, mechanical-hydraulic dependable and cost-effective as standard with threaded holes on both sides in the fi xed jaw for the workpiece stop exchangeable, hardened clamping

protected in the slide body trouble-free maintenance and cleaning: The slide body can be removed with a handle for tool and mould making, fi xture construction, production Supplied with standard

kg b c d f 100 25 50 205 464 18,5 34 13 80 380 457001 2100 125 40 75 225 526 31,5 45 15 100 430 457001 2125 160 50 95 309 684 58,5 54 18 120 550 457001 2160 160 50 95 509 884 75 54 18 120 750 457001

holding standard and special jaws for large clamping ranges Threaded holes on both sides for workpiece stops edge for clamping claws ardened and ground guideways Rapid coarse adjustment of the

making, fi xture construction, production Supplied with standard reversible jaws smooth/grooved, hand crank, operating manual Version with integrated manometer available on request (cannot be retrofi

126 Machine vice Euroine Type E, mechanical-hydraulic dependable and cost-effective as standard with threaded holes on both sides in the fi xed jaw for the workpiece stop exchangeable, hardened clamping jaws (1st side smooth, 2nd side grooved) ardened and ground guideways Rapid coarse adjustment of the desired clamping range by means of socket pin Spindle and power transmission integrated and protected in the slide body trouble-free maintenance and cleaning: The slide body can be removed with a handle for tool and mould making, fi xture construction, production Supplied with standard reversible jaws smooth/grooved, hand crank, operating manual Jaw width Clamp force k Crank force Clamp width S1 max. kg b c d f , , , Machine vice C Type C, mechanical-hydraulic versatile and flexible ongitudinal and transverse slots as standard for quick positioning Keyways and tapped holes on slide und fi xed jaw for holding standard and special jaws for large clamping ranges Threaded holes on both sides for workpiece stops edge for clamping claws ardened and ground guideways Rapid coarse adjustment of the desired clamping range by means of socket pin Resistant to deformation thanks to new bottom cross section and new fi xed jaw Mounting hole layout for clamping jaws extra high For tool and mould making, fi xture construction, production Supplied with standard reversible jaws smooth/grooved, hand crank, operating manual Version with integrated manometer available on request (cannot be retrofi tted!) max. d2 S3 d1 S2 d S1 c* b* w* u** 5 b1* Jaw width Clamp force k Crank force f Crank radius Clamp width S1 Clamp width S2 Clamp width S3 b c d e d1 d2 u w kg , , , Top stepped jaws for type C for extremely large clamping widths, * = tolerance ± 0.01 including fastening screws Unit prices Jaw width eight depth for fixed jaw for slides ,

Machine vice KC Type KC, mechanical-hydraulic for the highest demands Fully encapsulated spindle and force transmission, reliable protection against chips with stepped reversible jaws as standard,

clamping of sensitive workpieces (optional accessories) Solid steel design with inboard slide guide Cross groove 20 7 for horizontal clamping Type Jaw width Clamp force k Crank radius Clamp width

127 Machine vice KC Type KC, mechanical-hydraulic for the highest demands Fully encapsulated spindle and force transmission, reliable protection against chips with stepped reversible jaws as standard, smooth rear side, with connection bore holes for almost all IM clamping jaw systems Rapid coarse adjustment of the desired clamping range by means of socket pin ocking device for purely mechanical clamping of sensitive workpieces (optional accessories) Solid steel design with inboard slide guide Cross groove 20 7 for horizontal clamping Type Jaw width Clamp force k Crank radius Clamp width Clamp width S1 kg Standard Standard Standard Customer-specifi c Customer-specifi c Customer-specifi c jaws escription Illustration Jaw width 100 ll prices in euro, VT excluded Jaw width 125 Jaw width 160 Stepped indexable jaw, fi xed Stepped indexable jaw, mobile Finely stepped strip, standard Finely stepped strip, low lock jaw, hardened, fi xed lock jaw, hardened, mobile lock jaw, soft, fi xed lock jaw, soft, mobile jaw extra high, fi xed jaw extra high, mobile jaw extra high, offset, fi xed jaw extra high, offset, mobile Pendulum jaw SlimFlex jaw, fi xed SlimFlex jaw, mobile SlimFlex insert, soft SlimFlex step insert SlimFlex prism insert Prices in bold print = delivery ex stock

ccessories and spare parts ngular drive for type E, C for mechanical-hydraulic machine vices and clamping systems pplication when normal operation is hindered or not possible also ideal for retrofi

128 ccessories and spare parts ngular drive for type E, C for mechanical-hydraulic machine vices and clamping systems pplication when normal operation is hindered or not possible also ideal for retrofi tting Jaw width a Crank radius Wr. width Precision workpiece stop for type E, C, KC Can be swivelled out of the way, with quick clamp djustment in 2 levels Jaw width d 100/ M M Thread jaws with screws for type E, C suitable for Screw Clamp height C 100 M 12 X 45 I C 125/160 M 12 X 45 I C 160 M 16 X 50 I ngular drive for type KC For changing the direction of the hand crank suitable for jaw width Wr. width / jaws with screws for type KC suitable for jaw width Clamp height M12 x M16 x , M12 x M16 x , 4146 Screw vailable on request! Q.I.S quick-change jaw system With hold-down eff ect, for type E, C, KC ase jaws are screwed onto the fi xed jaw and slide Changable jaws, held by two fi xed magnets, can be used and replaced with a single action

ouble clamping system S Type S, mechanically operated economic and cost-effective Multiple clamping of

free of play guarantees utmost precision can be mounted via the slides on the work table clamping force can be

without jaws and without crank Caution: Spindle can only be used with assembled jaws!

width t 100 25 44 70 420 22 14 24 457050 0420 125 40 44 82 430 25 17 27 457050 0430 125 40 44 82 510 25 17 27

Stepped centre jaw 2 457061 0020 457062 0020 Stepped centre jaw 3 457061 0030 457062 0030 Stepped indexable jaw

(construction length 430 ) 6 457062 0060 Floating jaw for multiple clamps (construction length 510 ) 6 457062

129 ouble clamping system S Type S, mechanically operated economic and cost-effective Multiple clamping of workpieces of the same or diff erent sizes 3rd hand function Fully enclosed spindle chamber inear guide that is free of play guarantees utmost precision can be mounted via the slides on the work table clamping force can be preselected via a torque wrench (optional) Tool und mould making, production and series production Supplied without jaws and without crank Caution: Spindle can only be used with assembled jaws! Jaw width Clamp force k ift e f f1 Wr. width t jaws escription Illustration Jaw width 100 Jaw width 125 Guide plate Stepped centre jaw Stepped centre jaw Stepped indexable jaw Stepped jaw, fi xed Floating jaw for multiple clamps (construction length 430 ) Floating jaw for multiple clamps (construction length 510 ) Centre jaw soft, material C Indexable jaw, soft, material C ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Multiple slide rails quick and precise clamping of workpieces at vertical and horizontal machining centres, milling and grinding machines Standard clamping device for clamping diff erent workpieces

work-table Tombstones available on request 60 toothed Particular advantages: Solve numerous clamping tasks with just one clamping system Can also be used on the torn Zero Point clamping systems ll

on request Contents per set imensions 1x Slide rail, 2x fi xed smooth jaws, 1x smooth wedge clamp 200 x 50 x 80 464001 2050 1x Slide rail, 2x fi xed smooth jaws, 1x smooth wedge clamp 200 x 50 x 80

3x fi xed smooth jaws, 2x smooth wedge clamp 400 x 50 x 80 464001 4050 1x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 400 x 80 x 80 464001 4080 1x Slide rail, 3x fi xed smooth jaws, 2x

130 Multiple slide rails quick and precise clamping of workpieces at vertical and horizontal machining centres, milling and grinding machines Standard clamping device for clamping diff erent workpieces Wedge clamps of various sizes can be used of various workpieces in confi ned spaces Combination of multiple slide rails by means of connection system, optimum longitudinal adjustment to the work-table Tombstones available on request 60 toothed Particular advantages: Solve numerous clamping tasks with just one clamping system Can also be used on the torn Zero Point clamping systems ll components of the system are compatible easy to install stop system cost-eff ective clamping system Multiple slide rail sets The clamping elements are mounted on the rail Other combinations available on request Contents per set imensions 1x Slide rail, 2x fi xed smooth jaws, 1x smooth wedge clamp 200 x 50 x x Slide rail, 2x fi xed smooth jaws, 1x smooth wedge clamp 200 x 50 x x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 300 x 50 x x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 300 x 80 x x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 400 x 50 x x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 400 x 80 x x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 500 x 50 x x Slide rail, 3x fi xed smooth jaws, 2x smooth wedge clamp 500 x 80 x Multiple slide rails, individual umber of holes Fixed jaws including slot nut and bolt Screw Smooth Grooved With claws M M M M M M M M M Wedge clamp including slot nut and bolt with allowance = approx. 4 per side l min. l max. h1 h2 b1 b2 Screw Clamp force k Smooth Grooved With allowance With claws M M M M M M M M M b2 b1 l max. l min. h2 h

ccessories Prices per PU escription dapter set 464010 0001 djustable limit stop 464010 0002 Fixed limit stop 464010 0003 jaws 464010 0004 Positioning socket 20 x 14 464010 0005 Positioning socket 20

131 ccessories Prices per PU escription dapter set djustable limit stop Fixed limit stop jaws Positioning socket 20 x Positioning socket 20 x Modular multiple clamping fixture mechanical clamping fi xture with modular design ccuracy to 0.02 ase body made of hardened steel RC 60 fully equipped for clamping four workpieces, can be extended for up to 9 clamping positions, see table below jaws are 1 thinner than the base body; therefore, lateral use of the clamp is possible also available with stepped jaws, prismatic jaws available as accessories Supplied with: Including four tool stops, clamping claws, slot nuts, alignment blocks, lifting screw and chuck key, one fi xed and four variable clamping jaws Slide rail, width 50 C Slide rail, width 75 C moving jaw - smooth Width ength eight 49 54/ / fixed jaw Width ength eight moving jaw - grooved Width ll prices in euro, VT excluded ength eight 49 54/ / Prices in bold print = delivery ex stock

system 5X100 and 3X100 igh clamping force (up to 42K) where it is required due to

no widening of the clamping jaws under load, no distortion of the work table enables the

machining without any protruding edges various clamping widths possible, only limited by the

round and irregularly shaped parts Positive clamping without knockout 5 X 100 can be set up

without fixing set and stop set 3X, for groove clearance 63-126 model height Clamp force k

3X100/150 150 5-22 22-236 8 459100 0150 4167 5X, for groove clearance 63-126 model height

22-236 8 459100 0200 5X100/225 225 5-42 22-236 8 459100 0225 5X100/250 250 5-42 22-236 8

Clamp force k height Clamp width depth 3X100/100 40 M12 10 100 22-236 8 459101 4012

4167 5X, hole matrix system Supplied without fi t bolts model for hole matrix 40-132 Clamp

132 system 5X100 and 3X100 igh clamping force (up to 42K) where it is required due to integration of the feed rod directly below the work support! no widening of the clamping jaws under load, no distortion of the work table enables the highest cutting forces due to extreme rigidity The low chucking depth of 8 enables 5-sided machining without any protruding edges various clamping widths possible, only limited by the size of the work table, by simply moving the two jaws clamps raw parts, machined parts, round and irregularly shaped parts Positive clamping without knockout 5 X 100 can be set up on T-slot panels and tables, on breadboards and dedicated fi xtures Jaw width 100 Supplied without fixing set and stop set 3X, for groove clearance model height Clamp force k range depth 3X100/ X100/ X100/ X, for groove clearance model height Clamp force k Clamp width depth 5X100/ X100/ X100/ X100/ X, hole matrix system Supplied without fi t bolts model for hole matrix Clamp force k height Clamp width depth 3X100/ M X100/ M X100/ M X, hole matrix system Supplied without fi t bolts model for hole matrix Clamp force k height Clamp width depth 5X100/ M12 17, X100/ M12 17, X100/ M16 17,

133 Fixing sets for 3X and 5X, T-slot system Price per PU for T-slot 14, M , M Support bars with 12 pins cup point 6 Price per PU eight suitable for 105 3X 100/ X 100/ Extension shafts with union nut ength jaws escription Pull-down clamping jaws Standard clamping jaw Unprocessed clamping jaws Pins escription Flat Cup point Cup point Round clamping head escription 4 Round clamping heads with clamping screws Stop set escription Complete Technical manual Cutting value recoendations and guideline operating values Twist drills, machine taps, drilling tools with cutting inserts, circle cutters, counterbores, countersinks, reamers, core drilling tools Circular saw blades, end milling cutters, thread mills, milling tools with indexable insert, disc milling cutter Rotatable indexable insert with holder, turning tools for thread cutting, recessing tools, parting-off tools, plunge-cut tools, knurling tools designs, tool holders Guideline values for grinding material Materials, technical data, dimension units, fi ts, tolerances ll prices in euro, VT excluded escription Cartoned, 180 pages, colour Prices in bold print = delivery ex stock

5-axis compact spanner ody made of ductile iron spheroidal graphite iron 600 ardened and ground guideways force 40 k at 110 m patented quick adjustment of the clamping width fully

Clamp force k kg 250 126 100 40 23 459500 0125 4172 Stepped jaws Jaw width escription Clamp width 125 Fixed 0-166 459501 0001 125 Mobile 0-166 459501 0002 4172 Multi-jaw Supplied

metal grip insert Jaw width Clamp width 156 6-165 459501 0005 4172 Screw-on jaws Jaw width escription Clamp width 60 arrow 7-156 2 459501 0006 125 wide 77-228 2 459501 0007 4172

134 5-axis compact spanner ody made of ductile iron spheroidal graphite iron 600 ardened and ground guideways force 40 k at 110 m patented quick adjustment of the clamping width fully enclosed spindle secure holding forces due to re-tensioning spring package Supplied without crank and without torque wrench ase body including clamping jaws ength Width eight Clamp force k kg Stepped jaws Jaw width escription Clamp width 125 Fixed Mobile Multi-jaw Supplied with 2 grip inserts and 2 support elements Jaw width escription Clamp width 160 Fixed Mobile Pendulum jaws Supplied with 2x hard metal grip insert Jaw width Clamp width Screw-on jaws Jaw width escription Clamp width 60 arrow wide Grip bars Jaw width eight Clamp width Clip-on support bars Jaw width eight

135 Mechanical centric clamping vices MZE Centring accuracy 0.04 high clamping force compact design Maximum degree of freedom in 5- and multi-sided machining Robust steel design, base body, sliding jaws and spindle surface-hardened Specially for clamping and machining raw parts on multi-axis machining centres as a cost-eff ective centric clamping vice solution for use on palleting and/or automation systems iff erent clamping jaw variants Mounting hole layout on the underside or by means of clamping claws Supplied with: Supplied with 1 pair of hard stepped jaws with undercut, 1 operating key Centring pins, clamping jaws, workpiece stop as well as various adaptors for machining centres available on request ub ub 1 2 Clamp width Clamp force k Wr. width kg , , , Short clamping jaw, hardened For positive clamping of workpieces during coarse chip removal Undercut 15 (dovetail), maximum holding force on the workpiece 1 2 S W Jaw width depth Grip clamping jaws, hardened and coated For increasing the holding forces on raw workpiece parts by form closure during the clamping operation Jaw width depth Top jaws, hardened and ground Raised clamping position, allows the use of short tools, especially for small workpieces For holding all standard clamping jaws as well as home-made jaws Jaw width 1 Clamp width ase for reducing the Z movement of the machine spindle or enables the collision-free usage of short tools Supplied with 2 centring pins and fastening screws for the centric clamping vice Jaw width Fixing material For attaching the MZE and MZS centric clamping vices to the work table, T-slot dimension 14 2 centring pins d14, 4 clamping jaws, 4 bolts M12, 4 T-slot nuts 14 suitable for jaw width ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Centring clamp System EST modular system: all clamping jaws are compatible and can be quickly exchanged jaws quick-release system ow

jaws can be easily adapted to workpieces Customized products for individual solutions and special jaws available on request ground

005 Special clamping fi xtures, design and production of complete clamping fi xtures available on request SM Centring accuracy ±0.

Ø25 60 0-160 10,9 459300 0180 SM 250 250 130 82 Ø25 100 0-220 19,0 459300 0250 4136 SMG enclosed base body, advantage: greatest possible

01 (in conjunction with ground jaws) Type b1 Clamp force k Clamp width kg SMG 140 140 80 97 Ø25 40 0-130 10 459301 0140 SMG 180 180 80 97

136 Centring clamp System EST modular system: all clamping jaws are compatible and can be quickly exchanged jaws quick-release system ow interfering contours, resulting in maximum fl exibility on multi-axis machining centres Can be combined with zero point clamping systems jaws can be easily adapted to workpieces Customized products for individual solutions and special jaws available on request ground threaded spindle ase body surfaces nitrided Precision Special clamping fi xtures, design and production of complete clamping fi xtures available on request SM Centring accuracy ±0.01 (in conjunction with ground jaws) Type b1 Clamp force k Clamp width kg SM Ø , SM Ø , SM Ø , SMG enclosed base body, advantage: greatest possible process safety for automated production Centring accuracy ±0.01 (in conjunction with ground jaws) Type b1 Clamp force k Clamp width kg SMG Ø SMG Ø SMG Ø jaws further jaws for various applications available on request, e.g. prism jaws for round parts, reversible top stepped jaws for parts with grip, jaw blanks made of steel, aluminium, coated jaws to stop the workpiece slipping Price per set = 2 pieces escription Grip jaws with Kongrip inserts Pendulum jaws (1 fi xed jaw, 1 pendulum jaw) Embossing jaws with tips Stepped jaws Soft jaws

Mechanical zero-point clamping system Realpoint modular system: ll components are compatible and can be quickly exchanged Extreme changing precision ± 0.

137 Mechanical zero-point clamping system Realpoint modular system: ll components are compatible and can be quickly exchanged Extreme changing precision ± extremely fl at design, only 27 high case-hardened, ground surface just one size of pull studs for all models With side faces for clamps for attachment on the work table Pallets indexable by 90 The palette is connected to the base plate by tightening a clamping screw Stud distance in Realpoint 52 and 96, thus compatible with existing systems rranging the angular base plates next to one another turns the work table into a grid table Pallets off ering customized attachment for your fi xture or existing clamping tools perfect for 5-axis machining centres, C rotary tables or milling-turning centres Retention forces of 50 k for tightening the clamping screw to 50 m Pallets for adapting clamping elements or fi xtures to the base plate Supplied with pull studs and aligning bolts Ø lignment bolt Ø ase plates Supplied with clamping screw olts Spare Ø for alignment pin Ø escription Realpoint pull studs Realpoint aligning bolts Ø Realpoint aligning bolts Ø igh quality for great performance. Multiple clamps by TOR: high-strength materials quick and exact clamping of multiple workpieces highest clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Technology to get excited about The new TOR zero-point clamping system fares well in any comparison Starting from page XX-X Experience the TOR zero-point clamping system, which presents the

dvantages that lift the TOR zero-point clamping system well above the competition Use of different clamping fittings for maximum positioning precision: Starting from Zero-point fitting: Positions at

points Classic: The zero point is defined via the zero point fitting in combination with the strut fitting ased on temperature effects: The zero point is defined via the centre axis by solely using

138 Technology to get excited about The new TOR zero-point clamping system fares well in any comparison Starting from page XX-X Experience the TOR zero-point clamping system, which presents the advantages of its innovative and trend-setting characteristics in use. dvantages that lift the TOR zero-point clamping system well above the competition Use of different clamping fittings for maximum positioning precision: Starting from Zero-point fitting: Positions at the absolute zero reference point page XX-X Strut fitting: Fixes the remaining free axis in place Undersize fitting: Is used exclusively for clamping and restraint Two ways of setting different zero points Classic: The zero point is defined via the zero point fitting in combination with the strut fitting ased on temperature effects: The zero point is defined via the centre axis by solely using strut fittings Starting from page XX-X System requires no maintenance Completely sealed system made of stainless steel to eliminate the need to maintenance when working dvantages in use bsolute simplicity in use thanks to the large catchment tolerance and the non-jaing feed-in facility Process safety thanks to advanced technology Starting from The characteristics of the 'three-cycle principle, form fit and a large ball diameter' further enhance the page XX-X process safety. These characteristics optimally distribute the force, losing no effect in the process Starting from page XX-X dvantages in use arge catchment tolerance Starting from page XX-X For the purpose of retracting a pallet into the clamping module, a pre-positioning of 6.5 or 12 is sufficient. Starting from page XX-X on-jaing Starting from page XX-X on-jaing extension and retraction thanks to the ideal form of the clamp fitting

dvantages in the technology arge retention, catchment and sealing forces Three-cycle

2 25 10 K 20 55 20 Force is distributed by way of a three-cycle principle.

Form fit The balls are encompassed from three sides in a form-fit fashion.

arge ball diameter dvantages in maintenance Rust-free Robust Suitable for industrial use

igh-alloy, hardened tool steel. This prevents corrosion.

o ball cage The balls are placed freely in the ball duct and continuously reposition

139 dvantages in the technology arge retention, catchment and sealing forces Three-cycle principle Size Retention force (k) Catchment/sealing force (k) hydr. K K Force is distributed by way of a three-cycle principle. This avoids exert shear loads on the balls. Form fit The balls are encompassed from three sides in a form-fit fashion. The forces are exerted evenly over the balls and are optimally spread out. arge ball diameter dvantages in maintenance Rust-free Robust Suitable for industrial use etter distribution of forces thanks to larger ball diameter. igh-alloy, hardened tool steel. This prevents corrosion. Robust, suitable for industrial use and with a long service life. o ball cage The balls are placed freely in the ball duct and continuously reposition themselves. s the balls are not in a cage, it is a quite simple process to blow out dirt using air. Safety system The system is absolutely process-safe. The clamping module can be opened at any time. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Installation clamping module, K10.2 ydraulic unlocking ardened cover and piston Precision < 0.

the food, pharmaceutical and chemical industries.

ydraulic pressure is only required for releasing (min. 50 bar/max. 60 bar). The modules are mechanically locked when tensioned.

vailable on request: - installation drawings - automation solutions - also available as an individual fl ange version K10.

With indexing 25 10 112 22 50 30 8 77 M6 8 22 0,6 459051 2010 4167 O U VEU UEVO EW UOVO Y Multiple-place clamping stations K10.

005 Steel, unhardened The clamping systems are equipped with fastening holes (for coon table slot sizes 63, 100 and 125 ) and positioning aids.

140 Installation clamping module, K10.2 ydraulic unlocking ardened cover and piston Precision < pplication: Zero-point clamping system for optimising tooling times when clamping, for chipping and nonchipping machining in all areas, as well as in the food, pharmaceutical and chemical industries. otes: The installation clamping modules boast high holding, pull-in and locking forces despite their small dimensions. ydraulic pressure is only required for releasing (min. 50 bar/max. 60 bar). The modules are mechanically locked when tensioned. Of benefi t in this case is the lack of interfering lines and any risk of leaks. vailable on request: - installation drawings - automation solutions - also available as an individual fl ange version K10.2 with and without indexing model Retention force Entrance/sealing force k 1 K M K T kg Without indexing M6-22 0, With indexing M , O U VEU UEVO EW UOVO Y Multiple-place clamping stations K10.2 Version ydraulic unlocking Precision < Steel, unhardened The clamping systems are equipped with fastening holes (for coon table slot sizes 63, 100 and 125 ) and positioning aids. The clamping stations are prepared for iediate operation. Connections are already screwed. The clamping station with blow-out has 2 connections: 1 x hydr. opening, 1 x pneum. low-out Installation drawings, further sizes as well as customised clamping stations for your machine available on request. dvantage: ow overall height of just of 36 ouble clamping station For the coon table slot sizes 63, 100 and 125 Entrance/sealing force k Retention force kg 2 x 10 2 x Quadruble clamping station For the coon table slot sizes 63, 100 and Entrance/sealing force k Retention force kg 4 x 10 4 x

6-place clamping station For the coon table slot sizes

kg 6 x 10 6 x 25 46 459075 1002 4167 8-place clamping

63 459076 1002 4167 O U VEU UEVO EW UOVO Y 459073 1004

in euro, VT excluded Entrance/sealing force k Retention

e.g. Mazak Variax 500 4 x 10 4 x 25 38 459073 1004 e.g.

141 6-place clamping station For the coon table slot sizes 63, 100 and 125 Entrance/sealing force k Retention force kg 6 x 10 6 x place clamping station For the coon table slot sizes 63, 100 and 125 Entrance/sealing force k Retention force kg 8 x 10 8 x O U VEU UEVO EW UOVO Y Quadruble clamping station For the table slot sizes 63 and 80 e.g. for MG - MU 50 EVO / Mazak Variax 500 for type ll prices in euro, VT excluded Entrance/sealing force k Retention force kg e.g. Mazak Variax x 10 4 x e.g. MG/MU 50 EVO 4 x 10 4 x Prices in bold print = delivery ex stock

O U VEU UEVO 459075 1003 459075 1004 EW UOVO Y 6-place

station For the table slot sizes 63 and 100 e.g.

type Entrance/sealing force k Retention force 459075

g. MG/MU 50 6 x 10 6 x 25 62 459075 1003 e.g. MG/MU 70

UOVO Y 6-place station For table groove size 100 e.

142 O U VEU UEVO EW UOVO Y 6-place clamping station For the table slot sizes 63 and 100 e.g. for MG - MU 50 / MG - MU 70 EVO / Mazak Variax 630 for type Entrance/sealing force k Retention force kg e.g. Mazak Variax x 10 6 x e.g. MG/MU 50 6 x 10 6 x e.g. MG/MU 70 EVO 6 x 10 6 x O U VEU UEVO EW UOVO Y 6-place clamping station For table groove size 100 e.g for 12-place clamping cube Entrance/sealing force k Retention force kg 6 x 10 6 x

brackets K10.2 ydraulic unlocking Pneumatic blow-out Steel, unhardened Precision < 0.

2 clamping stations. fi tting mounted on the underside.

Single clamping bracket With quadruple indexing 2 clamping fi ttings fi tted on the underside with a pitch of 200

Single clamping bracket With quadruple indexing 4 clamping fi ttings fi tted on the underside with a pitch of 200

ual clamping bracket fitted on the underside with a pitch of 200 2 clamping fi ttings fi tted on the underside with a pitch of

143 brackets K10.2 ydraulic unlocking Pneumatic blow-out Steel, unhardened Precision < O U VEU UEVO EW UOVO Y Version: ydraulic clamping bracket for optimising tooling times when clamping on K10.2 clamping stations. fi tting mounted on the underside. The quick-fi t plug is pre-fi tted and the integrated blow-out function can be connected according to specifi c needs. Single clamping bracket With quadruple indexing 2 clamping fi ttings fi tted on the underside with a pitch of 200 Entrance/sealing force k Retention force S kg Single clamping bracket With quadruple indexing 4 clamping fi ttings fi tted on the underside with a pitch of 200 Entrance/sealing force k Retention force S kg ual clamping bracket fitted on the underside with a pitch of clamping fi ttings fi tted on the underside with a pitch of 200 Entrance/sealing force k ll prices in euro, VT excluded Retention force S kg 2 x 10 2 x x 10 2 x x 10 2 x x 10 2 x x 10 2 x Prices in bold print = delivery ex stock

ual clamping bracket fitted on the underside with a pitch of

of 200 Entrance/sealing force k Retention force S kg 2 x 10 2 x

x 25 160 58 459080 4160 2 x 10 2 x 25 200 69 459080 4200 2 x 10

the underside with a pitch of 115 2 clamping fi ttings fi tted

25 180 37 459082 1152 4167 2 clamping fittings fitted on the

the underside with a pitch 25 190 57 459084 1151 2 x 10 2 x 25

144 ual clamping bracket fitted on the underside with a pitch of clamping fi ttings fi tted on the underside with a pitch of 200 Entrance/sealing force k Retention force S kg 2 x 10 2 x x 10 2 x x 10 2 x x 10 2 x x 10 2 x clamping fittings fitted on the underside with a pitch of clamping fi ttings fi tted on the underside with a pitch of 200 Entrance/sealing force k Retention force S kg 2 x 10 2 x x 10 2 x clamping fittings fitted on the underside with a pitch of clamping fi ttings fi tted on the underside with a pitch of 200 Entrance/sealing force k Retention force S kg 2 x 10 2 x x 10 2 x luminium angle clamping bracket 2 clamping fi ttings fi tted on the underside with a pitch of Entrance/sealing force k Retention force kg 2 x 10 2 x

O U VEU UEVO 12-place clamping cube ydraulic unlocking Pneumatic blow-out Steel, unhardened Precision < 0.

459075 1006 Fixed in place using the clamping fi tting on the underside. The pitch of the clamping modules is 200.

Entrance/sealing force k Retention force kg 12 x 10 12 x 25 210 459085 0002 4167 Installation clamping module K20 ydraulic unlocking ardened cover and piston

005 pplication: Zero-point clamping system for optimising tooling times when clamping, for chipping and non-chipping machining in all areas, as well as in the

otes: The installation clamping modules boast high holding, pull-in and locking forces despite their small dimensions.

145 O U VEU UEVO 12-place clamping cube ydraulic unlocking Pneumatic blow-out Steel, unhardened Precision < EW UOVO Y Version: ydraulic clamping cube for optimising tooling times when clamping on 6-place clamping station no Fixed in place using the clamping fi tting on the underside. The pitch of the clamping modules is 200. The quick-fi t plug is pre-fi tted and the integrated blow-out function can be connected according to specifi c needs. Entrance/sealing force k Retention force kg 12 x x Installation clamping module K20 ydraulic unlocking ardened cover and piston Precision < pplication: Zero-point clamping system for optimising tooling times when clamping, for chipping and non-chipping machining in all areas, as well as in the food, pharmaceutical and chemical industries. otes: The installation clamping modules boast high holding, pull-in and locking forces despite their small dimensions. ydraulic pressure is only required for releasing (min. 50 bar/max. 60 bar). The modules are mechanically locked when tensioned. Of benefi t in this case is the lack of interfering lines and any risk of leaks. vailable on request: - installation drawings - automation solutions - also available as an individual fl ange version O U VEU UEVO EW UOVO Y K20 with and without indexing model Retention force Entrance/sealing force k ll prices in euro, VT excluded 1 K M K T kg Without indexing M6-34 1, With indexing M , Prices in bold print = delivery ex stock

Multiple-place clamping stations K20 Version ydraulic unlocking

005 Steel, unhardened ttachment holes can be provided in the base plate

clamping stations for your machine available on request.

Entrance/sealing force k Retention force K 1 R S SM kg 2 x 20 2 x 55 196

station Entrance/sealing force k Retention force K 1 R S SM kg 4 x 20 4

146 Multiple-place clamping stations K20 Version ydraulic unlocking Precision < Steel, unhardened ttachment holes can be provided in the base plate in accordance with your specifi cations on request The clamping station has 1 connection: 1 x hydr. opening, Installation drawings, further sizes as well as customised clamping stations for your machine available on request. dvantage: ow overall height of just of 46 ouble clamping station Entrance/sealing force k Retention force K 1 R S SM kg 2 x 20 2 x G1/ , Quadruble clamping station Entrance/sealing force k Retention force K 1 R S SM kg 4 x 20 4 x G1/ place clamping station Entrance/sealing force k Retention force K 1 R S SM kg 6 x 20 6 x G1/

attachment holes in the interchangeable pallet on request.

459070 1002 459070 2002 459070 1004 459070 2004 459070 1006 459070 2006 459070 1008 for type

2 366 366 200 M12 28 200 10 459070 1004 K10.2 366 566 200 M12 28 200 16 459070 1006 K10.

147 Interchangeable pallets for K10.2 and K20 igh-strength aluminium O U VEU UEVO EW UOVO Y ote: It is possible to provide attachment holes in the interchangeable pallet on request. Other dimensions, pitches and numbers of clamping fi ttings are available on request for type ll prices in euro, VT excluded R S SM kg K M K M K M K M K M K M K M Prices in bold print = delivery ex stock

O U VEU UEVO fitting and catch screws nipple ardened, for hydraulic clamping modules Type 1 2 1 M T Zero point adapter

2 21,8 15 8 19 16-3 459061 1003 Protective nipple K10.

459061 2002 Undersize nipple K20 31,8 25 12 28 23-5 459061 2003 Protective nipple K20 31,8 - - - - M8-459061 2004 4167

2 M8 37 6 459062 1001 K20 M12 54 9 459062 2001 4167 ir hydraulic pump Use: The air hydraulic pump is used to open

EW UOVO Y esign: Compact, compressed air-operated hydraulic pump for single-acting circuits.

The safety valve is set during production to a maximum operating pressure of 60 bar.

Connecting thread, air: G1/4 Connecting thread, oil: G1/4 ote: The use of cleansed and lubricated compressed air is

bar Usable oil vol. cm³ Transport vol. max.

148 O U VEU UEVO fitting and catch screws nipple ardened, for hydraulic clamping modules Type M T Zero point adapter K , Strut nipple K , Undersize nipple K , Protective nipple K , M Zero point adapter K20 32, Strut nipple K20 32, Undersize nipple K20 31, Protective nipple K20 31, M Captivating nipple screws Strength class 10.9 Other lengths and materials (e.g. stainless steel) available on request for type M 1 K10.2 M K20 M ir hydraulic pump Use: The air hydraulic pump is used to open hydraulic clamping modules or hydraulic clamping stations. EW UOVO Y esign: Compact, compressed air-operated hydraulic pump for single-acting circuits. The pump is fi tted with an integrated safety valve that regulates the outgoing hydraulic pressure. The safety valve is set during production to a maximum operating pressure of 60 bar. The expansion body in the oil tank enables the pump to be used horizontally and vertically. Connecting thread, air: G1/4 Connecting thread, oil: G1/4 ote: The use of cleansed and lubricated compressed air is recoended for the operation of the pump. 1.ir intake, 2.ydraulic outlet ir pressure min. bar ir pressure max. bar Usable oil vol. cm³ Transport vol. max. cm³/min kg , ccessories O U VEU UEVO EW UOVO Y escription Testing pressure bar Operating pressure bar W ominal aperture l/min Wr. width Protective cap igh pressure hose 2m Pipe screw joint G1/ Quick coupling socket Quick coupling plug

Vacuum clamping plate also ideal for clamping non-magnetic workpieces can be used with compressed air in combination with the integrated venturi

Vacuum plates can be combined with one another high holding forces igh friction coeffi cient, enables secure clamping of unmachined workpiece

Supplied with integrated venturi nozzle, silencer, vacuum meter, shut-off valve, 6 eccentric stops, 2 m pneumatic hose, plug nipple for compressed

5 Vacuum clamping plate R kg 300 200 40 25 5,5 473080 3020 300 400 40 25 12 473080 3040 400 400 40 25 16 473080 4040 400 600 40 25 23 473080 4060

400 400 4 25 0,78 473082 3040 4173 Rope seal Ø ength m 4,5 ±0,45 10.

149 Vacuum clamping plate also ideal for clamping non-magnetic workpieces can be used with compressed air in combination with the integrated venturi nozzle and with an external vacuum pump Cost saving due to use of the venturi nozzle less compressed air consumption, thus reduced operating costs Vacuum plates can be combined with one another high holding forces igh friction coeffi cient, enables secure clamping of unmachined workpiece surfaces Seal cords help to compensate minor surface irregularities at the workpiece. Operation only with dry, filtered and oil-free compressed air! Supplied with integrated venturi nozzle, silencer, vacuum meter, shut-off valve, 6 eccentric stops, 2 m pneumatic hose, plug nipple for compressed air connection, 10 m seal cord Ø 4.5 Vacuum clamping plate R kg , Rubber adaptor mat R g , luminium adapter plate R g , Rope seal Ø ength m 4,5 ±0, ccessories escription Positioning pin M4 x Off-centre limit stop Ø 30 with countersink screw Pneumatic hose Ø 6, length 10 m jaws for clamping screws M12, M14, M ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Eccentric anchor clamps For fi xture plates Eccentric head ensures the clamping motion and the clamping force (up to 27 k) The hexagonal brass disc acts as a clamp every workpiece shape can be

150 Eccentric anchor clamps For fi xture plates Eccentric head ensures the clamping motion and the clamping force (up to 27 k) The hexagonal brass disc acts as a clamp every workpiece shape can be clamped with positioning pins and one or two clamping screws low height enables easy machining of the workpiece surface attention does not have to be paid to the position of the clamping jaws for CC prograing space saving multiple clamping due to low height It is so easy and cost-effective to clamp variously shaped parts: Eccentric anchor clamps Clamp force k Interior hexagon Thread Thread length Wr. width Wr. width height Eccentric travel 0,9 3 M4 x ,8 0, ,4 4 M6 x ,8 1, ,6 5 M8 x , M10 x ,4 1, M12 x , M16 x ,7 2, ,63 5 M8 x , Spare screws Spare hexagon washers Thread M M M8 V M M M M Thread M M M8 V M M M M Fastening disc Suitable for clamping blanks and castings as well as untreated surfaces made of case-hardened steel a PU contains fastening discs and eccentric screws Screw eight Ø M10 6,4 20, M , M16 13,4 30,

Eccentric clamping screws for T-slots Connection of the normal clamping elements with eccentric bolt (with brass-hexagon or fastening disc) to a slot nut enables cost-eff ective

bolt fi xes the T-slot nut in the T-slot ow height, fl at parts can also be machined at the surface Rapid adjustment to various workpiece sizes and any formed parts, no rectangular

width height Eccentric travel for T-slot 3,4 4 M 6 x 1 12 16 4,8 1 8 475012 0408 3,4 4 M 6 x 1 12 16 4,8 1 10 475012 0410 3,6 5 M 8 x 1.25 16 21 4,8 1 12 475012 0512 9 7 M10 x 1.

75 25 25 9,5 2 18 475012 0818 27 12 M16 x 2 30 30 12,7 2,5 20 475012 1220 27 12 M16 x 2 30 30 12,7 2,5 22 475012 1222 4156 Kit 6 x eccentric clamping screw (with brass discs) 4 x slot

Pull-down eff ect for T-slots 14, 16, 18 and for direct mounting on the fi xture plate or work table M12 eccentric clamping screw for clamping force of 18 k ody and clamping washer

have to be rectangular C C front side Eccentric travel T-slot size 50 28,5 16 12,7 25,5 2 14 475050 0014 50 28,5 16 12,7 25,5 2 16 475050 0016 50 28,5 16 12,7 25,5 2 18 475050 0018 50

side can be used as a stop space-saving multiple clamping plate with toothed surface for raw parts and smooth surface for machined parts Preferably assembled in a slot of width (+0.

151 Eccentric clamping screws for T-slots Connection of the normal clamping elements with eccentric bolt (with brass-hexagon or fastening disc) to a slot nut enables cost-eff ective workpiece clamping on work tables or clamping plates with T-slots. bolt fi xes the T-slot nut in the T-slot ow height, fl at parts can also be machined at the surface Rapid adjustment to various workpiece sizes and any formed parts, no rectangular lateral surfaces required force of up to 27k Supplied with brass disc and slot nut Clamp force k Interior hexagon Thread Thread length Wr. width Wr. width height Eccentric travel for T-slot 3,4 4 M 6 x , ,4 4 M 6 x , ,6 5 M 8 x , M10 x ,4 1, M12 x , M12 x , M16 x ,7 2, M16 x ,7 2, Kit 6 x eccentric clamping screw (with brass discs) 4 x slot nut 2 x socket head wrench T-slot size Pull-down clamp Pull-down eff ect for T-slots 14, 16, 18 and for direct mounting on the fi xture plate or work table M12 eccentric clamping screw for clamping force of 18 k ody and clamping washer case-hardened plate with toothed edge for raw parts and smooth edge for machined parts The clamping washer adapts to the angular position of the workpiece, i.e. the workpiece does not have to be rectangular C C front side Eccentric travel T-slot size 50 28, ,7 25, , ,7 25, , ,7 25, , ,7 25,5 2 Without T-slot nut Combi-pull-down claw the pull-down eff ect ensures the workpiece is secured properly The front side is used for clamping, the rear side can be used as a stop space-saving multiple clamping plate with toothed surface for raw parts and smooth surface for machined parts Preferably assembled in a slot of width (+0.05 ) the engagement height of the clamping plate can be changed by the depth of the slot ody and clamping plate are case-hardened Supplied with fastening screws C ll prices in euro, VT excluded E F G Eccentric screw Eccentric travel ttachment screw 43, ,7 25,4 2,3 19 6,4 M10 x 1.5 1,6 M8 x ,4 11,4 33,5 2,8 25,4 9,7 M12 x M10 x ,1 25,5 50,8 3, M16 x 2 2,5 M12 x Prices in bold print = delivery ex stock

ocking clamp djustment by means of threaded spindle (V-thread) wide clamping range Parallel clamping by means of clamping jaws with V-block and smooth

70 75 470180 0115 5 150 118 140 470180 0150 4151 film For clamping workpieces that cannot otherwise be clamped due to their instability, shape or lack

30-200 /cm² depending on the type or supporting surface enables the machining of thin or diffi cult to clamp parts can also be used to reinforce thin

harmful chemicals escription fi lm, roll 250 x 7600 475100 3076 fi lm, roll 300 x 1500 475100 3015 4156 ouble wedge clamp simultaneous clamping of two

ective clamping fi xture for round and rectangular parts force up to 27 k The use of a support and clamping bar further simplifi es the process of

M2.5 9,1 9,7 7,9 11,9 4,7 9,5 475034 0025 2,2 1,4 3 M4 12,3 14,6 10,4 15,9 5,6 12,7 475034 0004 6,8 1,8 5 M6 18,6 19 16,1 23,8 9,5 19 475034 0006 9

152 ocking clamp djustment by means of threaded spindle (V-thread) wide clamping range Parallel clamping by means of clamping jaws with V-block and smooth clamping surfaces Copper-plated threaded spindle and clamping jaws model C film For clamping workpieces that cannot otherwise be clamped due to their instability, shape or lack of magnetic properties Workpiece and fi lm are heated to C (oven, heating plate, hot air etc.) after cooling down, the holding power is approx /cm² depending on the type or supporting surface enables the machining of thin or diffi cult to clamp parts can also be used to reinforce thin workpieces during machining Film can be used with steel, non-ferrous metals, glass, wood, most plastics and many other materials does not contain harmful chemicals escription fi lm, roll 250 x fi lm, roll 300 x ouble wedge clamp simultaneous clamping of two workpieces with one clamping element Space-saving multiple clamping reduces the auxiliary processing times and therefore the unit costs cost-eff ective clamping fi xture for round and rectangular parts force up to 27 k The use of a support and clamping bar further simplifi es the process of constructing a clamping fi xture Clamp force k Spread Interior hexagon Thread C E F 0,9 0,2 1,5 M2 6,1 6,9 5,3 8,1 3,6 6, ,5 2 M2.5 9,1 9,7 7,9 11,9 4,7 9, ,2 1,4 3 M4 12,3 14,6 10,4 15,9 5,6 12, ,8 1,8 5 M6 18, ,1 23,8 9, ,4 6 M8 24,8 25,9 20,8 31,7 12,7 25, ,1 10 M12 37,3 38,6 30,8 47, , ,8 14 M16 49,7 51,5 41,2 63,4 25,3 50,

Form closure double wedge clamps Extra wide jaws, can be ground to suit the shape of the workpiece secure clamping of diffi cult parts non-distorted clamping of instable parts space saving

during form milling to ensure the jaws remain stable and vibration free.

16,1 9,5 6,6 15,9 M 4 M 6 yes 475035 0060 6,8 38,1 19 23,9 16,1 9,5 6,6 15,9 M 4 M 6 no 475035 0061 9 50,8 25,4 31,8 20,8 12,7 9,4 20,6 M 4 M 8 yes 475035 0080 9 50,8 25,4 31,8 20,8 12,7 9,4 20,6 M 4

153 Form closure double wedge clamps Extra wide jaws, can be ground to suit the shape of the workpiece secure clamping of diffi cult parts non-distorted clamping of instable parts space saving simultaneous clamping of two workpieces higher productivity due to less auxiliary processing times ideal for machining centres as well as milling and drilling machines ote: locking plate is inserted during form milling to ensure the jaws remain stable and vibration free. Supplied with wedge clamp and screw Clamp force k C E F 2,2 28,6 12,7 15,9 10,6 6,3 4,6 10,2 M 2,5 M 4 yes ,2 28,6 12,7 15,9 10,6 6,3 4,6 10,2 M 2,5 M 4 no ,8 38, ,9 16,1 9,5 6,6 15,9 M 4 M 6 yes ,8 38, ,9 16,1 9,5 6,6 15,9 M 4 M 6 no ,8 25,4 31,8 20,8 12,7 9,4 20,6 M 4 M 8 yes ,8 25,4 31,8 20,8 12,7 9,4 20,6 M 4 M 8 no ,2 38,1 47,6 30, ,8 30,5 M 5 M 12 yes ,2 38,1 47,6 30, ,8 30,5 M 5 M 12 no ,6 50,8 63,5 41,3 25,4 20,3 40 M 6 M 16 yes ,6 50,8 63,5 41,3 25,4 20,3 40 M 6 M 16 no G I ocking plate Pitbull-anchor clamps Pull-down eff ect with clamping forces up to 50 k Sharp-edged for raw parts (cast iron, forged, cut parts) or with blunt edge to avoid clamping marks space saving very low hight compact design igh clamping force strong pull-down no interfering edges for the tool Multi-sided machining Ideal for multiple clamping ote: imensions and are guide values Type of clamping edge Substance C Thread width force m Tightening torque m route Sharp ardened steel 3,8 3,6 9,5 1,9 M 2,5 9, ,8 0, lunt ardened steel 3,8 3,6 9,5 1,9 M 2,5 9, ,8 0, lunt rass 3,8 3,6 9,5 1,9 M 2,5 9, ,6 0, Sharp ardened steel 5,1 4,8 12,7 2,6 M 4 12, ,6 0, lunt ardened steel 5,1 4,8 12,7 2,6 M 4 12, ,6 0, lunt rass 5,1 4,8 12,7 2,6 M 4 12, ,8 0, Sharp ardened steel 7,6 7,2 19,05 3,8 M 6 19, ,5 0, lunt ardened steel 7,6 7,2 19,05 3,8 M 6 19, ,5 0, lunt rass 7,6 7,2 19,05 3,8 M 6 19, ,6 0, Sharp ardened steel 10,2 11,4 25,4 6,3 M 10 25, , lunt ardened steel 10,2 11,4 25,4 6,4 M 10 25, , Sharp ardened steel 15,2 16,3 38,1 9,5 M 12 38, , lunt ardened steel 15,2 16,3 38,1 9,5 M 12 38, , Pitbull combi-anchor clamps high clamping force of up to 26 k The rectangular ground rear side acts simultaneously as a workpiece stop during multiple clamping Engagement height of the clamping washer can be changed by the depth of an assembly slot C ll prices in euro, VT excluded E F route force m Tightening torque m Thread width 57,1 31,3 25,1 15,7 38,1 0, ,5 M 8 19, ,6 37,6 31,5 18,8 47 1, M 10 25, Prices in bold print = delivery ex stock

475038 0120 107 38,1 41 35 9,1 38,6 10,9 1,25 2600 M 16 20, 22, 24 25,4 475038 0160 4156 bolts Secure, safe, precise and powerful clamping for practically ever workpiece form lso suitable for

154 Pitbull universal anchor clamps for T-slots For use on fi xture plates, work tables with T-slot, grid plates, work cubes, etc. ase body hardened, supporting surfaces ground Supplied without fastening bolts and T-slot nuts C h6 E F G force m Screw for T-slot width , ,54 9,1 43,2 12,7 0, M 12 14, 16, 18 19, , ,1 38,6 10,9 1, M 16 20, 22, 24 25, bolts Secure, safe, precise and powerful clamping for practically ever workpiece form lso suitable for clamping base ength tolerance class js6, clamping parallel to table ensured Standard clamping range 8 40, expandable to a maximum of 87 using clamping screws escription: 1. range 2. ength (js6) 3. Key width screw 5. ring 6. iameter Key width Spacer washer bolts Supplied with M10 threaded bolts, spacer washer, clamping screw, clamping ring escription ength range With fi xed thread M With replaceable threaded bolts M With replaceable threaded bolts M screws ring Threaded bolts range esignation ring Thread M M M M

Side spanner M 12 x 14, complete with slot nut ase body made of stainless steel, nitrifi ed Tensioning hook made of stainless steel, case-hardened Tightening torque 75 m ttachment with screws of

9 compact design pull-down eff ect ensures safe and secure attachment of the workpiece increased plate tension for the machining of holes and grooves ateral clamping of plates for machining entire

be used as a clamping element and as a fi xed stop Movement of the adjusting bolt causes the tensioning hook to clamp the workpiece.

155 Side spanner M 12 x 14, complete with slot nut ase body made of stainless steel, nitrifi ed Tensioning hook made of stainless steel, case-hardened Tightening torque 75 m ttachment with screws of strength class 10.9 compact design pull-down eff ect ensures safe and secure attachment of the workpiece increased plate tension for the machining of holes and grooves ateral clamping of plates for machining entire surfaces without any interfering contours lateral thread enables the attachment of a stop can be used for horizontal and vertical applications Reduced setup costs diverse and variable application can be used as a clamping element and as a fi xed stop Movement of the adjusting bolt causes the tensioning hook to clamp the workpiece. t the same time, a pull-down eff ect occurs on the supporting surface. ttachment of a lateral stop enables the workpiece to be clamped repeatedly in the same position. Groove width Thread F1 k F2 k 14 M12 65 ± 0, ase plate for clamping at right angles to the table slot ase body made of tempered steel, hardened and burnished ttachment with screws of strength class 10.9 M 12 x 14, complete with slot nut Groove width Thread 14 M12 30 ± 0, ase plate Exact displacement of the side clamps by means of alignment block on the work table Workpiece mounting increased by 30 ase body made of tempered steel, hardened and burnished ttachment with screws of strength class 10.9 Groove width Thread 14 M12 30 ± 0, igh quality for great performance. Tool carts by TOR: highly resilient materials extremely flexible compartments will not topple over even when drawers are open easy in and out of the drawers drawer stop to prevent simultaneous opening of more than one drawer This is but one example of TOR s high-quality workshop furnishings. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Flat clamps Mini-ulle hardened and tempered to a burnished tone h1 = at maximum T-slot depth according to I 650 to obtain low clamping heights for minimum slot depths, the clamps can be ground down

to the slot size, which holds the clamp securely in position without damaging the table Supplied in pairs in the box complete with fastening screws I 912, 8.

b h1 h2 F1 k F2 k 12 1,8 2,5 13,5 5 52 18 7 11 5 0,6 466102 0012 14 1,8 1,5 13,5 5 55 22 8 11 5,5 0,7 466102 0014 16 2,5 2,5 17 6 68 25 9 15 8 0,9 466102 0016 18 2,5 1,5 16 6 71 28 10 15 9 1 466102

9/ISO 4762, nuts for T-slots I 508 and hexagon screwdriver ISO 2936 Prices per pair Groove width c h b l l1 l2 d F1 k F2 k 12 3 20 40 80 26 39 M10 16 0,6 466103 0012 14 3 20 40 80 26 39 M12 22 0,9

140 50 65 M20 36 1,4 466103 0022 24 5 30 78 140 50 65 M20 36 1,4 466103 0024 28 5 30 78 140 50 65 M24 40 1,6 466103 0028 30 5 30 78 140 50 65 M24 40 1,6 466103 0030 4157 eep clamping jaws Maxi-ulle

.. The wedge faces of these clamps are skilfully arranged to achieve maximum clamping forces with low exertion.

156 Flat clamps Mini-ulle hardened and tempered to a burnished tone h1 = at maximum T-slot depth according to I 650 to obtain low clamping heights for minimum slot depths, the clamps can be ground down by x for clamping particularly low workpieces The wedge eff ect of the clamping jaws ensures the workpiece is fi xed to the work table securely orizontal forces are absorbed by a screw corresponding to the slot size, which holds the clamp securely in position without damaging the table Supplied in pairs in the box complete with fastening screws I 912, 8.8 / ISO 4762 and hexagon screwdriver ISO 2936 Prices per pair Groove width c h min. h max. x l max. b h1 h2 F1 k F2 k 12 1,8 2,5 13, , ,8 1,5 13, ,5 0, ,5 2, , ,5 1, ,5 21, , eep clamping jaws ulle hardened and tempered to a burnished tone Supplied in pairs in the box complete with fastening screws I 912, 10.9/ISO 4762, nuts for T-slots I 508 and hexagon screwdriver ISO 2936 Prices per pair Groove width c h b l l1 l2 d F1 k F2 k M , M , M , M , M , M , M , M , M , M , eep clamping jaws Maxi-ulle ase body: uctile iron jaws: hardened and tempered to a burnished tone for higher workpieces Further development of the tried and tested deep clamping jaw no The wedge faces of these clamps are skilfully arranged to achieve maximum clamping forces with low exertion. ccording to the actual slot width, T-slot bolts I 787 (two bolts per clamping jaw) must be ordered separately. If there are specifi c reasons why the fastening screw cannot protrude over the upper edge of the clamp, we recoend hexagon socket head screws I 912/ISO 4762 combined with washers I 6340 and nuts for T-slots I 508. Supplied in pairs in the box with hexagon screwdriver ISO 2936 without fastening screws Prices per pair Groove width b1 c h h1 h2 b l l

Stabilising clamping jaws jaws can be rotated igh design with exact inverted vee guide ase body: Malleable cast iron jaws: Case-hardened steel jaws can be rotated, with smooth side for machined

secure the stabilizing clamping jaws on the work table! ccording to the actual slot width, T-slot bolts I 787 (two bolts per clamping jaw) must be ordered separately.

0038 4157 Mandrels lmost every workpiece has at least one bore hole. This is suitable for clamping the workpiece (turning, milling, drilling) for machining the second side.

the clamping diameter screw hardened and coated Supplied with 3 fastening screws () C E F G I J 10,7 7,6 6,1 3 20 h9 7,4 4,1 M 2 on TK Ø 13.7 M 2 4,1 475041 0020 21,8 16 15 5,9 29.

157 Stabilising clamping jaws jaws can be rotated igh design with exact inverted vee guide ase body: Malleable cast iron jaws: Case-hardened steel jaws can be rotated, with smooth side for machined workpieces and grooved side for raw clamping surfaces Robust clamping jaws with large clamping surfaces ideal for the lateral clamping of high workpieces We recoend using two clamping screws to secure the stabilizing clamping jaws on the work table! ccording to the actual slot width, T-slot bolts I 787 (two bolts per clamping jaw) must be ordered separately. Groove width b1 c h h1 h2 h3 b l l1 e ,5 112, ,5 136, ,5 157, Mandrels lmost every workpiece has at least one bore hole. This is suitable for clamping the workpiece (turning, milling, drilling) for machining the second side. 5-face machining space saving design for multiple clamping Mandrel can be turned and milled to the desired diameter easy to use for through-holes, iameter of the fastening fl ange is concentric to the clamping diameter screw hardened and coated Supplied with 3 fastening screws () C E F G I J 10,7 7,6 6, h9 7,4 4,1 M 2 on TK Ø 13.7 M 2 4, , , h9 12,4 7,2 M 3 on TK Ø 21 M , , h9 14,2 12,2 M 3 on TK Ø 23.1 M , , h ,5 M 3 on TK Ø 29 M ,6 22,2 17,5 6,4 50 h M 4 on TK Ø 39.4 M ,8 25,4 20,6 6,4 56 h8 35,3 25,4 M 4 on TK Ø 45.5 M ,6 31,8 27 7, h M 5 on TK Ø 55.9 M ,6 31,8 27 7, h M 5 on TK Ø 63.9 M ,5 37,6 32,3 7, h M 6 on TK Ø 92.5 M , h M 6 on TK Ø 118 M for blind bores available in various sizes, although the user turns or mills the specifi c diameter of the workpiece Supplied with lock ring suitable for ll prices in euro, VT excluded C E F G Interior hexagon Clamp force k athe 44, ,3 53, Milling machine 41, , ,7 17,8 M Prices in bold print = delivery ex stock

Power chuck force of up to 16 k Quick clamping of workpieces

nuts C Illustration 0-100 45 105 95 20 15 1 2 468001 0100 0-125

0130 4169 ase T-slot size for type Illustration 105 65 16

100 16 0130 4 468002 0130 4169 T-slot nut set Set contents: 1x

468005 0012 3-part 14 468005 0014 3-part 16 468005 0016 3-part

3-part 24 468005 0024 4169 Power chuck Material CK 45 forged

47 16 28 20 467045 1214 16 M12 0-60 18-75 28,5 113 M18 10 128 47

28 20 467045 1218 18 M16 0-62 21-78 28,5 125 M20 12 140 53 18 32

158 Power chuck force of up to 16 k Quick clamping of workpieces Easy access when machining Supplied with chuck key without slot nuts C Illustration ase T-slot size for type Illustration / / T-slot nut set Set contents: 1x spring, screw, slot nut each Contents T-slot size 3-part part part part part part part Power chuck Material CK 45 forged ardened slides uff er elements available on request for T-slot m h s e e1 d Wr. width b c f Clamp force k 14 M ,5 113 M M ,5 113 M M ,5 113 M M ,5 125 M M ,5 125 M M ,5 125 M

jaw infinitely adjustable Steel, forged, hardened and tempered, galvanised complete with T-slot bolts I 787, nuts and washers for the quick bridging of

suitable for clamping blanking and stamping tools T-groove dimension I 787 Clamp height T-groove screw I 787 Clamps x W 12 0-50 12 M12 x 125 140 x 50

x 200 175 x 60 466001 0020 22 0-85 22 M20 x 200 175 x 60 466001 0022 4157 jaw, short Without clamping screw, with U-section infi nitely adjustable

h k m 12/14 M12 88 38 13 28 48 23 68 0-35 14 52 466002 0012 16/18 M16 130 56 18 38 74 29 101 0-55 18 80 466002 0016 20/22 M20 140 66 22 46 80 32 112

steel, painted complete with T-slot bolts I 787, nuts and washers Supplied without notched clamping lever, please order separately bevelled I 6314 V

x100 10-38 M12 21 40 466005 0014 16 M16 x125 13-48 M16 26 45 466005 0016 18 M16 x125 13-46 M16 26 45 466005 0018 20 M20 x160 16-65 M20 30 60 466005 0020

e2 10 M10 x 80 22-46 M10 32 32 466010 0010 12 M12 x100 28-58 M12 40 40 466010 0012 14 M12 x100 28-56 M12 40 40 466010 0014 16 M16 x125 36-71 M16 49 50

159 jaw infinitely adjustable Steel, forged, hardened and tempered, galvanised complete with T-slot bolts I 787, nuts and washers for the quick bridging of various clamping heights without additional underlay requires little space on the work table designed for the highest load capacity Particularly suitable for clamping blanking and stamping tools T-groove dimension I 787 Clamp height T-groove screw I 787 Clamps x W M12 x x M12 x x M16 x x M16 x x M20 x x M20 x x jaw, short Without clamping screw, with U-section infi nitely adjustable hardened and tempered, galvanised and yellow passivated Supplied without T-slot bolt and nut T-groove dimension I 787 T-groove screw I 787 b b1 c d e f h k m 12/14 M /18 M /22 M /28 M claw sets With adjustable setting screw ardened and tempered steel, painted complete with T-slot bolts I 787, nuts and washers Supplied without notched clamping lever, please order separately bevelled I 6314 V T-groove dimension a T-groove screw I 787 Clamp height d e1 e2 10 M10 x M M12 x M M12 x M M16 x M M16 x M M20 x M M20 x M offset I 6316 V T-groove dimension a T-groove screw I 787 ll prices in euro, VT excluded Clamp height d e1 e2 10 M10 x M M12 x M M12 x M M16 x M M16 x M M20 x M M20 x M Prices in bold print = delivery ex stock

otched clamping lever Steel, burnished Thread l d M12 135 33 48 M16 158 40 64 h suitable for 4660050012 4660050014 4660100012 4660100014

8 Thread d l l1 10 30 39 8 466012 0010 12 36 49 10 466012 0012 12 36 94 10 466012 0112 16 42 55 13 466012 0016 16 42 90 13 466012 0116 20 50 69

claw when positioning and removing the workpiece. This results in quick and secure declamping.

38 26 12 M16 - M18 466055 0003 4 38 22,5 40 28 12 M20-M22 466055 0004 5 45 27,5 44 32 12 M24 - M27 466055 0005 4157 www.atorn.

160 otched clamping lever Steel, burnished Thread l d M M h suitable for Setting screw I 6314 S hardened and tempered Strength class 8.8 Thread d l l claw holder spring-loaded, with brass locking screw The clamping claw holder supports the clamping claw when positioning and removing the workpiece. This results in quick and secure declamping. model d l l1 Spring defl ection suitable for screws , M8 - M , M12 - M , M16 - M , M20-M , M24 - M igh quality for great performance. Multiple clamps by TOR: high-strength materials quick and exact clamping of multiple workpieces highest clamping force This is but one example of TOR s high-quality clamping tools

claw ardened and tempered steel, painted Standard version I 6314 Slit width l a b2 b3 e1 e2 for screws 6,6 50 10 20 8 10 20 M6 466020 0007 9 60 12 25 10

60 22 30 60 M20 M22 466020 0022 26 200 30 70 26 35 80 M24 466020 0026 33 250 40 80 34 45 100 M30 466020 0033 4157 Forked clamp, bevelled I 6315 Slit

466025 0014 18 160 30 48 15 8 M16 M18 466025 0018 22 200 40 52 15 10 M20 M22 466025 0022 26 200 40 66 20 10 M24 466025 0026 33 250 50 74 20 12 M30

14 160 25 40 24 47 30 M12 M14 466030 0014 18 200 30 50 28 57 36 M16 M18 466030 0018 22 250 40 60 35 68 45 M20 M22 466030 0022 26 315 40 70 43 83 56 M24

0007 9 80 12 25 12 9 25 25 M8 466040 0009 11 100 15 30 15 12 32 32 M10 466040 0011 14 125 20 40 20 16 40 40 M12 M14 466040 0014 18 160 25 50 25 20 49 50

4157 With stepped teeth Compatible with universal clamping supports page 40-150 The long version is provided for long reaches due to wide groove

Slit width l ll prices in euro, VT excluded a b2 b3 e1 e2 for screws 6,6 50 10 20 8 10 20 M6 466046 0007 9 60 12 25 10 13 22 M8 466046 0009 11 80 15 30

161 claw ardened and tempered steel, painted Standard version I 6314 Slit width l a b2 b3 e1 e2 for screws 6, M M M M12 M M16 M M20 M M M Forked clamp, bevelled I 6315 Slit width l a b2 b3 b4 for screws 6, M M M M12 M M16 M M20 M M M Forked clamp with nose Slit width l1 a b2 b3 l2 l3 for screws M M M12 M M16 M M20 M M M Standard, offset I 6316 Slit width l a b2 b3 c e1 e2 for screws 6, M M M M12 M M16 M M20 M * * M M With stepped teeth Compatible with universal clamping supports page The long version is provided for long reaches due to wide groove distances or greater chucking depth on the workpiece, e.g. on engraving machines. Slit width l ll prices in euro, VT excluded a b2 b3 e1 e2 for screws 6, M M M M12 M M16 M M20 M M Prices in bold print = delivery ex stock

elical clamp Special casting Screw and threaded sleeve strength class 8.

320 the compact design ensures it requires little space on the work table model a S C 0 12 0-45 0,75 14 140 34 466044 1200 1 12 15-45 0,75

12 180-255 2,5 19 112 34 466044 1205 0 14 0-45 0,75 14 140 34 466044 1400 1 14 15-45 0,75 14 110 34 466044 1401 2 14 30-75 1,25 15 112 34

1,25 20 160 50 466044 1600 1 16 25-70 1,25 20 125 50 466044 1601 2 16 50-120 2,5 21 125 50 466044 1602 3 16 100-220 3,75 21 125 50 466044

125 50 466044 1802 3 18 100-220 3,75 21 125 50 466044 1803 4 18 200-300 3,75 24 125 50 466044 1804 4157 Stepped blocks for clamping claws

5 height diff erence each Standing face and steps surface-milled Clamp height a b 12,5-50 42,5 50 466045 0050 57,5-95 95 55 466045 0095

0320 4157 Universal clamping supports individual and in a set ardened and tempered steel, painted can be combined in pairs with all clamping

162 elical clamp Special casting Screw and threaded sleeve strength class 8.8 Can be quickly employed as a clamping unit Fine grading of the steps enables rapid adjustment to every workpiece height up to approx. 320 the compact design ensures it requires little space on the work table model a S C , , , , , , , , , , , , , , , , , , , , , , Stepped blocks for clamping claws Machine casting, painted Support: 50 wide With jaw steps of 7.5 height diff erence each Standing face and steps surface-milled Clamp height a b 12, , , , , , , , Universal clamping supports individual and in a set ardened and tempered steel, painted can be combined in pairs with all clamping claws and individually with the toothed clamping claws page Vertical step height 4.65, horizontal step height model h - a b c , Set, consisting of: 8 x Model 1, 8x Model 2, 4 x Model

supports With connecting spring ardened and tempered steel, painted can be combined with all clamping claws oth parts of the base are connected by a spring for ease of handling Vertical step height 4.

2 Stand surface milled model h - l b oad capacity k 2 111-147 50 50 40 466049 0002 3 155-223 60 60 60 466049 0003 4 220-340 80 80 90 466049 0004 4157 Screw jack with flat support ardened and tempered

5052 12 50 60 50 50-70 466015 5070 12 50 60 50 70-100 466015 5010 12 68 100 68 100-140 466015 7014 12 80 170 70 140-210 466015 7021 12 100 350 80 190-300 466015 8010 4157 luminium vice With chip

163 supports With connecting spring ardened and tempered steel, painted can be combined with all clamping claws oth parts of the base are connected by a spring for ease of handling Vertical step height 4.65, horizontal step height 2.3 model Support surface height imensions x W x x 40 x supports, toothed (toothed stands) Malleable cast iron, painted Step height 5.2 Stand surface milled model h - l b oad capacity k Screw jack with flat support ardened and tempered steel, painted Spindle: Trapezoidal thread self-locking with end stop body Centre hole Ø ead Ø oad capacity k ase body Ø Support surface height luminium vice With chip guard Wiper protects the vice thread against the ingress of swarf Centring hole Ø12 Spindle made of tempered steel, burnished Trapezoidal thread self-locking, with end stop body escription Screw jack with aluminium foot Screw jack with magnetic foot ll prices in euro, VT excluded ead Ø luminium intermediate rings ase body Ø oad capacity k Support surface height h 12, Prices in bold print = delivery ex stock

Screw jack TS With locking nut Centring hole Ø12 Spindle made of hardened and tempered steel, with trapezoidal thread Spindle head, burnished

320-550 22 25 46 466017 0550 4157 Screw jack eavy-duty design, with brass locking screw Centring hole Ø12 Spindle made of hardened and tempered

65 80 466018 0300 290-470 26 65 60 466018 0460 430-750 26 65 50 466018 0750 710-1250 26 65 40 466018 1250 4157 eight-adjustable threaded

oad capacity k 55-75 83-103 113-133 12 50 36 30 25 466050 0075 75-115 103-143 133-173 12 50 36 30 45 466050 0115 4157 djustable threaded

164 Screw jack TS With locking nut Centring hole Ø12 Spindle made of hardened and tempered steel, with trapezoidal thread Spindle head, burnished ase body grey cast iron, painted h - a oad capacity k d Screw jack eavy-duty design, with brass locking screw Centring hole Ø12 Spindle made of hardened and tempered steel, with trapezoidal thread Spindle head, burnished ase body made of hardened and tempered steel, painted h - a d oad capacity k eight-adjustable threaded pedestal with 1 cylinder pin I 6325 ( 12 x 50 and 12 x 80 ) Centring hole Ø12 ardened and tempered steel, burnished Spindle: metric fi ne thread M30x1.5 with end stop body Sliding insert runs on pressed-in plain bearing bushing h - with straight shank 12 x 50 with straight shank 12 x 80 d 1 oad capacity k djustable threaded pedestal with rotatable ball Steel hardened and tempered to a burnished tone ardened ball Punctiform support, particularly suitable for supporting and aligning free-formed surfaces such as cast and forged workpieces djustment accuracy approx h - oad capacity k

ttachments For alignment and support members Steel hardened and tempered to a burnished tone all attachment Ø 37 466019 0001

Ø 32 45 23 10 42 50 466019 0010 56 65 38 22 62 100 466019 0011 4157 Centring plate escription For holding vices with Ø50

rotatable ball ardened ball oad capacity k 30 466019 0040 4157 Correcting wedge ERKUES Rest height Centring hole Ø 12 uctile

ball jack pad 466019 0001 Wedge block can still be adjusted slightly at a load equal to one third of the maximum load capacity

hexagon screwdriver ouble wedge eff ect, produces large stroke and precise vertical movement without lateral displacement Rest

width * /U oad capacity k 100-125 60 115 125 14 1,16 100 466050 0125 170-190 80 145 175 22 2,02 250 466050 0190 50-63 40 63 8

165 ttachments For alignment and support members Steel hardened and tempered to a burnished tone all attachment Ø V-block attachment C min. E max. Ø Centring plate escription For holding vices with Ø Fixing attachment for forked clamp d l ttachment with rotatable ball ardened ball oad capacity k Correcting wedge ERKUES Rest height Centring hole Ø 12 uctile iron and steel hardened and tempered to a burnished tone, incl. ball jack pad Wedge block can still be adjusted slightly at a load equal to one third of the maximum load capacity precision machined wedge-shaped surfaces enable quiet, sensitive adjustment, ( < 1/10 ), either using knurled thumb screw or hexagon screwdriver ouble wedge eff ect, produces large stroke and precise vertical movement without lateral displacement Rest height, tried and tested with heavy cast or forged parts on large machine tools h - Wr. width * /U oad capacity k , , , igh quality for great performance. Short chucks by TOR: high-strength materials perfect concentricity accuracy large clamping range high clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

166 Quick-release nut with washer patented forged, hardened and tempered, strength class 10 Reduction of assembly and clamping times Push a quick-release nut over the thread as far as the clamping point and then lock it in place. o not tighten outer sleeves more than half a rotation. Eff ortless bridging of long screw threads and clamping spindles easy assembly / disassembly in confi ned spaces without visibility o searching for thread no seizure on the thread due to external infl uences not impaired by soiling Thread 1 E M S M16 10,4 35,5 30,68 23, M20 12, , M24 16,0 50,4 46,72 34, exagon nuts 1.5 x high, I6330 hardened and tempered, strength class 10 With spherical end can be used directly with spherical washer I 6319 or G fl at end can be used with hardened washers I 6340 Thread Wr. width e m r M , M , M , M , M , M , M , M , M , M , M , M , M , M M , M , M , x high, I6334 hardened and tempered, strength class 10 Connecting element between I 787 (screw for T-slots) as well as I 6379 (stud) not a screw-through version minimum screw-in length = 1 x Thread Wr. width e m M , M , M , M , M , M , M , M , M , M , M , M , M , M M , M , M ,

167 1.5 x high, I6331 with collar hardened and tempered, strength class 10 athed and milled Thread Wr. width e m a d1 M , M ,4 12 3, M , M , M , M , M ,4 21 4, M ,5 21 4, M , M , M , M , M , M M , M , M , Plain washers Standard version I 6340 hardened and tempered ( v 30) * = dimensions in accordance with I, but stamped and pressed fl at for thread d1 d2 s M6 6, M8 8, M10 10, M M14* M M18* M M22* M M27* M M36* Spherical washer I 6319 Case-hardened and phosphate, suitable for screw strength according to 8.8 Used only for smooth closed ring surfaces (not permissible for longitudinal slots. For this purpose, we recoend I 6319G for thread ll prices in euro, VT excluded max. transferable static bolt force k d2 d4 h3 M6 9 7,1 12 2, M8 17 9,6 17 3, M , M , M ,5 28 5, M , M ,2 36 7, M , M M Prices in bold print = delivery ex stock

168 Spherical washer I 6319 C case-hardened and phosphated for thread d1 d3 h2 r M6 6,4 12 2, M8 8,4 17 3, M10 10, M , M M , M , M , M , M Spherical washer I 6319 G stamped, gauged, hardened and tempered Ideally suited for clamping claw using the slot on clamping bolts enables the respective clamping bolt to swivel out by 3 * = deviates from I for thread d2 d5 h4 M6 7, M8 9, M M12 14,2 36* M14 16, M * M20 23, M M * M T-slot bolts complete with nut and washer Forged, T-slot guide milled, rolled thread M 6 - M12 hardened and tempered to strength class 10.9 M14 M42 hardened and tempered to strength class 8.8 further sizes available on request Groove width d b a e k 6 M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , Groove width d b a e k 16 M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , Groove width d b a e k 22 M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M ,

Studs rolled thread M 6 - M12 hardened and tempered to strength class 10.9 M14 - M42 hardened and tempered to strength class 8.

466505 0863 M8 80 50 11 466505 0880 M8 100 63 11 466505 0810 M8 125 75 11 466505 0812 M8 160 100 11 466505 0816 M10 50 25 13 466505 1050 M10 80 50 13 466505 1080 M10 100 75 13 466505 1010 M10 125 75

160 100 15 466505 1216 M12 200 125 15 466505 1220 M14 63 32 17 466505 1463 M14 80 50 17 466505 1480 M14 100 63 17 466505 1410 M14 125 75 17 466505 1412 M14 160 100 17 466505 1416 M14 200 125 17

169 Studs rolled thread M 6 - M12 hardened and tempered to strength class 10.9 M14 - M42 hardened and tempered to strength class 8.8 further sizes available on request d b b1 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M d b b1 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M Rhombus screws Forged, T-slot guide milled, rolled thread hardened and tempered to strength class 8.8 reduced supporting surface in the T-slot, reduced load capacity T-slot nominal dimension Thread ll prices in euro, VT excluded a b e k 14 M , M , M , M , M , M , M , M , M , M , M , M , Prices in bold print = delivery ex stock

170 T-slot nuts hardened and tempered, strength class 10 full load capacity of the T-slot nuts can only be achieved if the screw connection occurs over the entire thread length Standard design, I 508 T-slot nominal Thread a e h k dimension 6 M5 5, M6 7, M8 9, M8 11, M10 11, M10 13, M12 13, M10 15, M12 15, M14 15, M12 17, M14 17, M16 17, M16 19, M18 19, M18 21, M20 21, M20 23, M22 23, M20 27, M22 27, M24 27, M24 29, M27 31, M24 35, M30 35, M30 41, M36 41, M42 47, long design 4158 Protects the table grooves on precision machinery T-slot nominal dimension Thread a e l h k 6 M5 5, M6 7, M8 9, M10 11, M12 13, M14 15, M16 17, M18 19, M20 21, M24 27, T-slot nuts Rhombus hardened and tempered due to the reduced supporting surface in the T-slot, the load capacity is is less than with comparable sizes I 508 T-slot nominal dimension Thread Strength class a e h k 12 M , M , M , M , M , M , M , M , M , M , M , M ,

Precision T-nuts For quick alignment of fi xtures, machine vice and dividing apparatus olding to prescribed tolerances and precisely ground on the turn-up C15 case-hardened and ground oose slot nuts

20 466550 1212 12 20 14 5,5 32 466550 1220 14 20 14 5,5 32 466550 1420 16 20 14 5,5 32 466550 1620 18 20 14 5,5 32 466550 1820 20 20 45,5 7 32 466550 2020 22 20 50,5 7 40 466550 2220 24 20 55,5 7 40

slot widths Groove dimensions machine Groove dimensions device h l for I 84 or I 912 screws 10 20 10 22 M6 x 10 466551 1020 12 20 10 22 M6 x 10 466551 1220 14 20 10 25 M6 x 16 466551 1420 16 20 10 25

171 Precision T-nuts For quick alignment of fi xtures, machine vice and dividing apparatus olding to prescribed tolerances and precisely ground on the turn-up C15 case-hardened and ground oose slot nuts I 6323 For adjusting o disturbing slot nuts protruding from below when the fi xture is transported Groove dimensions machine Groove dimensions device h h1 l , ,6 5, , , , , , , , , , fixed slot nuts (previously I 6322)<br /> for screwing in Changing the slot nuts allows operation on machines with diff erent slot widths Groove dimensions machine Groove dimensions device h l for I 84 or I 912 screws M6 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x flat slot nuts for screwing in eff ective and economic if a fi xture is always to be used at the same machine b h l Stop Case-hardened and ground Short model ground to ± 0.01 height tolerance Can also be used as support for T-slot ll prices in euro, VT excluded M6 x M6 x M8 x M8 x M8 x M8 x M10 x M10 x M10 x M10 x Screw Prices in bold print = delivery ex stock

Parallel stop pair For machine slots Case-hardened and ground in pairs for height according to pair tolerance IT5 Can also be used as parallel underlays Pair

ISO 7268m Prices per pair b h Pair tolerance tp ominal dimension tolerance I 7168 m () Tolerance h7 l 8 25 0,009 ±0,2-0.02 100 465010 0008 10 32 0,011 ±0,3-0.

02 160 465010 0018 20 63 0,013 ±0,3-0.02 160 465010 0020 22 80 0,013 ±0,3-0.02 160 465010 0022 24 80 0,013 ±0,3-0.02 160 465010 0024 28 100 0,015 ±0,3-0.

T-slots imensions 12 12 x 1000 466549 0120 14 14 x 1000 466549 0140 16 16 x 1000 466549 0160 18 18 x 1000 466549 0180 20 20 x 1000 466549 0200 22 22 x 1000

172 Parallel stop pair For machine slots Case-hardened and ground in pairs for height according to pair tolerance IT5 Can also be used as parallel underlays Pair tolerance to height IT5 ominal dimension tolerance to the extent of I ISO m ominal dimension tolerance to width h7 Remaining dimensions according to I ISO 7268m Prices per pair b h Pair tolerance tp ominal dimension tolerance I 7168 m () Tolerance h7 l ,009 ±0, ,011 ±0, ,011 ±0, ,011 ±0, ,011 ±0, ,013 ±0, ,013 ±0, ,013 ±0, ,013 ±0, ,015 ±0, Cover strip for T-slots made of aluminium profi le can be easily shortened to the desired length with a fi ne sawblade suitable for T-slots imensions x x x x x x x x x Groove scraper suitable for T-slots

tool assortment box designed for machine tools with T-slot tables all the necessary elements for the quick clamping of tools, fi xtures or workpieces all parts can be exchanged and replaced ardened

173 tool assortment box designed for machine tools with T-slot tables all the necessary elements for the quick clamping of tools, fi xtures or workpieces all parts can be exchanged and replaced ardened and tempered steel, according to I or company standard Screw parts strength class 8 or 10 Wooden box with removable hinged lid M10x10 set, with deep clamping jaws, groove width 10 escription 4 Universal clamping supports model 1, 4 universal clamping supports model 2, 2 universal clamping supports model 3, 4 clamps with stepped teeth 11 x 80, 2 I 787 screws for T-slots M10 x 40, 4 I 787 screws for T-slots M10 x 63, 4 I 787 screws for T-slots M10 x 100, I 6379 studs M10 x 80, 6 I 6330 hexagon nut M10, 6 I 6319 G conical nut M10, 4 extension nut M10, 4 deep clamping jaw ulle groove width 12, 1 no combination wrench 16x16, 1 screw paste 75 ml 4158 M12x14 set, with deep clamping jaws, groove width 14 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 14 x 100, 2 I 787 screws for T-slots M12 x 50, 4 I 787 screws for T-slots M12 x 80, 4 I 787 screws for T-slots M12 x 125, 4 I 6379 studs M12 x 100, I 6330 hexagon nut M12, 6 I 6319 G conical nut M12, 4 extension nut M12, 4 deep clamping jaw ulle groove width 14, 1 groove scraper for groove width 14-20, 1 no combination wrench 18x18, 1 screw paste 75 ml 4158 M16x18 set, with deep clamping jaws, groove width 18 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 18 x 125, 2 I 787 screws for T-slots M16 x 63, 4 I 787 screws for T-slots M16 x 100, 4 I 787 screws for T-slots M16 x 160, 4 I 6379 stud M16 x 125, I 6330 hexagon nut M16, 6 I 6319 G conical nut M16, 4 extension nut M16, 4 deep clamping jaw ulle groove width 18, 1 groove scraper for groove width 14-20, 1 no combination wrench 24x24, 1 screw paste 75 ml 4158 M12x12 set, with deep clamping jaws, groove width 12 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 14 x 100, 2 I 787 screws for T-slots M12 x 50, 4 I 787 screws for T-slots M12 x 100, 4 I 787 screws for T-slots M12 x 125, 4 I 6379 studs M12 x 100, I 6330 hexagon nut M12, 6 I 6319 G conical nut M12, 4 extension nut M12, 4 deep clamping jaw ulle groove width 12, 1 no combination wrench 18x18, 1 screw paste 75 ml 4158 M16x16 set, with deep clamping jaws, groove width 16 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 18 x 125, 2 I 787 screws for T-slots M16 x 63, 4 I 787 screws for T-slots M16 x 100, 4 I 787 screws for T-slots M16 x 160, 4 I 6379 stud M16 x 125, I 6330 hexagon nut M16, 6 I 6319 G conical nut M16, 4 extension nut M16, 4 deep clamping jaw ulle groove width 16, 1 groove scraper for groove width 14-20, 1 no combination wrench 24x24, 1 screw paste 75 ml 4158 M20x20 set with spring type clamping claw holder, groove width 20 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 22 x 160, 4 I 787 screws for T-slots M20 x 125, 4 I 787 screws for T-slots M20 x 200, 4 I 6379 studs M20 x 125, 6 I 6330 hexagon nut M20, I 6319 G conical nut M20, 4 extension nut M20, 1 groove scraper for groove width 14-20, 1 no combination wrench 30x30, 4 I 6342 spring type clamp holder Ø38, 1 screw paste 75 ml 4158 M20x22 set with spring type clamping claw holder, groove width 22 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 22 x 160, 4 I 787 screws for T-slots M20 x 125, 4 I 787 screws for T-slots M20 x 200, 4 I 6379 studs M20 x 125, 6 I 6330 hexagon nut M20, I 6319 G conical nut M20, 4 extension nut M20, 1 groove scraper for groove width 22-32, 1 no combination wrench 30x30, 4 I 6342 spring type clamp holder Ø38, 1 screw paste 75 ml 4158 ll prices in euro, VT excluded M20x24 set with spring type clamping claw holder, groove width 24 escription 4 Universal clamping supports model 2, 4 universal clamping supports model 3, 4 clamps with stepped teeth 22 x 160, 8 I 787 screws for T-slots M20 x 125, 4 I 787 screws for T-slots M20 x 200, 8 I 508 nuts for T-slots M20 x 24, 6 I 6330 hexagon nut M20, I 6319 G conical nut M20, 4 extension nut M20, 1 groove scraper for groove width 22-32, 1 no combination wrench 30x30, 4 I 6342 spring type clamp holder Ø38, 1 screw paste 75 ml 4158 Prices in bold print = delivery ex stock

screw set for T-slots all parts hardened and tempered, strength classes 8 or 10 Wooden box with hinged lid M10x10 set, groove width 10 escription 2 I 787 Screw for T-slots M10 x 40, 4 I 787 screw for

174 screw set for T-slots all parts hardened and tempered, strength classes 8 or 10 Wooden box with hinged lid M10x10 set, groove width 10 escription 2 I 787 Screw for T-slots M10 x 40, 4 I 787 screw for T-slots M10 x 80, 4 I 787 screw for T-slots M10 x 100, 4 I 6379 stud M10 x 50, 4 I 6379 stud M10 x 80, 4 I 6379 stud M10 x 200, 4 I 6330 hexagon nut M10, 4 extension nut M10, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer M12x12 set, groove width 12 escription M12x14 set, groove width 14 escription I 787 Screw for T-slots M12 x 50, 4 I 787 screw for T-slots M12 x 80, 4 I 787 screw for T-slots M12 x 125, 4 I 6379 stud M12 x 63, 4 I 6379 stud M12 x 100, 4 I 6379 stud M12 x 200, 4 I 6330 hexagon nut M12, 4 extension nut M12, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer M14x16 set, groove width 16 escription I 787 Screw for T-slots M12 x 50, 4 I 787 screw for T-slots M12 x 80, 4 I 6379 stud M12 x 63, 4 I 6379 stud M12 x 100, 4 I 6379 stud M12 x 125, 4 I 6379 stud M12 x 200, 4 I 508 nut for T-slots M12 x 14, 4 I 6330 hexagon nut M12, 4 extension nut M12, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer M16x16 set, groove width 16 escription I 787 Screw for T-slots M14 x 63, 4 I 787 screw for T-slots M14 x 100, 4 I 6379 stud M14 x 63, 4 I 6379 stud M14 x 100, 4 I 6379 stud M14 x 160, 4 I 6379 stud M14 x 250, 4 I 508 nut for T-slots M14 x 16, 4 I 6330 hexagon nut M14, 4 extension nut M14, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer M16x18 set, groove width 18 escription I 787 Screw for T-slots M16 x 63, 4 I 787 screw for T-slots M16 x 100, 2 I 787 screw for T-slots M16 x 160, 4 I 6379 stud M16 x 80, 4 I 6379 stud M16 x 125, 4 I 6379 stud M16 x 250, 4 I 6330 hexagon nut M16, 4 extension nut M16, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer M18x20 set, groove width 20 escription I 787 Screw for T-slots M16 x 63, 4 I 787 screw for T-slots M16 x 100, I 6379 stud M16 x 80, I 6379 stud M16 x 125, I 6379 stud M16 x 160, I 6379 stud M16 x 250, 4 I 508 nut for T-slots M16 x 18, 4 I 6330 hexagon nut M16, 4 extension nut M16, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer M20x22 set, groove width 22 escription I 6379 Stud M18 x 80, 8 I 6379 stud M18 x 125, 4 I 6379 stud M18 x 200, 4 I 6379 stud M18 x 315, 4 I 508 nut for T-slots M18 x 20, 4 I 6330 hexagon nut M18, 4 extension nut M18, 4 I 6340 washer M24x28 set, groove width 28 escription I 787 Screw for T-slots M20 x 80, 4 I 787 screw for T-slots M20 x 125, 4 I 6379 stud M20 x 80, 4 I 6379 stud M20 x 125, 4 I 6379 stud M20 x 200, 4 I 6379 stud M20 x 315, 4 I 508 nut for T-slots M20 x 22, 4 I 6330 hexagon nut M20, 4 extension nut M20, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer I 787 Screw for T-slots M24 x 100, 4 I 787 screw for T-slots M24 x 160, 4 I 6379 stud M24 x 100, 4 I 6379 stud M24 x 160, 4 I 6379 stud M24 x 250, 4 I 6379 stud M24 x 400, 4 I 508 nut for T-slots M24 x 28, 4 I 6330 hexagon nut M24, 4 extension nut M24, 4 I 6319 C spherical washer, 4 I 6319 G conical washer, 4 I 6340 washer

asic range ll parts are made of quenched and tempered steel, T-slot screws hardened and tempered Rolled thread Ideally suited to tool making, production and training facilities M12x14 set, groove

model 2, 4 universal clamping support model 3, 2 I 787 screw for T-slots M12 x 50, 4 I 787 screw for T-slots M12 x 80, 466592 1214 4 I 787 screw for T-slots M12 x 125, 2 I 6379 stud M12 x 100, 6 I

175 asic range ll parts are made of quenched and tempered steel, T-slot screws hardened and tempered Rolled thread Ideally suited to tool making, production and training facilities M12x14 set, groove width 14 force 20 k heights 165 (2 clamping positions), 70 (4 clamping positions) escription 2 Clamp with stepped teeth 14 x 100, 2 clamp with stepped teeth 14 x 160, 4 universal clamping support model 2, 4 universal clamping support model 3, 2 I 787 screw for T-slots M12 x 50, 4 I 787 screw for T-slots M12 x 80, I 787 screw for T-slots M12 x 125, 2 I 6379 stud M12 x 100, 6 I 6330 hexagon nut M12, 2 extension nut M12, 6 I 6340 washer M M14x16 set, groove width 16 force 28 k heights 195 (2 clamping positions), 100 (4 clamping positions) escription 2 Clamp with stepped teeth 14 x 100, 2 clamp with stepped teeth 14 x 160, 4 universal clamping support model 2, universal clamping support model 3, 2 I 787 screw for T-slots M14 x 63, 4 I 787 screw for T-slots M14 x 100, I 787 screw for T-slots M14 x 160, 2 I 6379 stud M14 x 100, 2 I 6379 stud M14 x I 6330 hexagon nut M14, 2 extension nut M14, 6 I 6340 washer M M16x18 set, groove width 18 force 40 k heights 205 (2 clamping positions), 130 (4 clamping positions) escription 2 Clamp with stepped teeth 18 x 125, 2 clamp with stepped teeth 18 x 200, 4 universal clamping support model 2, universal clamping support model 3, 2 I 787 screw for T-slots M16 x 63, 4 I 787 screw for T-slots M16 x 100, I 787 screw for T-slots M16 x 160, 4 I 6379 stud M16 x 160, 4 I 6379 stud M16 x I 6330 hexagon nut M16, 4 extension nut M16, 6 I 6340 washer M element set made of plastic 55 elements: jaws, supports and nuts, high-strength plastic PT, red 15 studs, anodised aluminium For use on 3 coordinate measurement machines, engraving machines and spark erosion grinding machines For applications that require low clamping and retention forces force approx. 500 depending on lever conditions and clamping jaw support force is achieved by tightening the nut on the knurl If the clamping elements are jaed, the nut can be loosened using an open-end spanner only 1/4 in proportion to aluminium elements and 1/10 in proprtion to steel elements Resistant to corrosion from hand sweat o damage to work table or workpiece Versatile in combination Thread Screw paste ased on mineral grease synergistic combination of highly eff ective white solid lubricants heat-resistant and does not wash out (water resistance in accordance with I 51807, T.2; grease loss after 1 hr./37.8 C = 1.4%) For lubricating frequently operated screws or nuts in clamping fi xtures Particularly when aggressive cooling lubricants are used Thanks to optimum sliding friction, this increases the achievable clamping force material-friendly ll prices in euro, VT excluded x W x kg M 6 50 x 370 x 440 1, M 8 50 x 370 x 440 1, M x 370 x 440 1, M x 370 x 440 1, Contents Usable temperature range C 75 ml -25 to Prices in bold print = delivery ex stock

Vertical acting toggle clamps Quick-release lever based on a toggle mechanism Wide and rapid opening of the clamp, complete exposure of the workpiece high power

bending, grinding, testing and assembling Galvanized and passivated, case-hardened with greased bearing bushings Rivet made of stainless steel complete with tempered,

x 25 467001 0000 1 0,6 1,1 20 105-4 to 3 5 38 60 M5 x 30 467001 0001 2 0,8 1,2 25 129-3 to 6 6 51 78 M6 x 35 467001 0002 3 1,2 2,5 36 186 0 to 12 8 80 112 M8 x 45 467001

4157 1 Screw With open supporting arm and vertical base model F1 k F2 k 1 W 1 0,6 1,1 31 108 2 to 9 5 38 60 M5 x 30 467005 0001 2 0,8 1,2 38 146 5 to 14 6 51 78 M6 x 35

0005 6 3,4 5,5 117 370 18 to 75 14 165 230 M12 x110 467005 0006 4157 1 Screw with open supporting arm and angled foot model F1 k F2 k 1 W 1 0,8 1,1 47 132-1.5 to 5.

176 Vertical acting toggle clamps Quick-release lever based on a toggle mechanism Wide and rapid opening of the clamp, complete exposure of the workpiece high power transmission with low force application, large clamping forces Self-locking prevents the clamp from opening when machining workpieces pplication: rilling, welding, bending, grinding, testing and assembling Galvanized and passivated, case-hardened with greased bearing bushings Rivet made of stainless steel complete with tempered, galvanised clamping screw Stainless steel version available on request With open supporting arm and horizontal base model F1 k F2 k 1 W 0 0,5 0,7 17, to M4 x ,6 1, to M5 x ,8 1, to M6 x ,2 2, to M8 x , to M8 x to M12 x ,4 5, to M12 x Screw With open supporting arm and vertical base model F1 k F2 k 1 W 1 0,6 1, to M5 x ,8 1, to M6 x ,2 2, to M8 x , to M8 x to M12 x ,4 5, to M12 x Screw with open supporting arm and angled foot model F1 k F2 k 1 W 1 0,8 1, to M 5 x , to M 6 x ,4 2, to M 8 x to M 8 x Screw

Push-pull clamp galvanised and passivated case-hardened with greased bearing bushings Rivet made of stainless steel complete with tempered,

17 66 M 4 x 20 467025 0000 1 1 1 15 60 12 to 20 8 24,5 91 M 4 x 20 467025 0001 2 2 2 20 95 17 to 25 10 32,5 114 M 6 x 25 467025 0002 3 2,5 2,5

body made of cast steel, lever parts and drive rod made of tempered steel model F1 k F2 k 1 W 3 4 4 30 115 22 to 40 12 40-72 140 M 8 x 35

Combination clamp Positioning and clamping in one work step Robust and stable construction Easy removal of workpiece thanks to fully retracted

grip surface and soft component model F1 k F2 k 1 W1 W2 2 2,0 2,0 46,0 94 30 to 40 10 to 20 56 219 19,5 467030 0002 3 3,0 3,0 55,5 110 40 to 50

protect delicate workpieces the protective cap sizes correspond to the size of the clamping screws suitable for model Width eight 0 11 8,5 10

177 Push-pull clamp galvanised and passivated case-hardened with greased bearing bushings Rivet made of stainless steel complete with tempered, galvanised clamping screw Stainless steel version available on request With small angled foot model F1 k F2 k 1 W 0 0,8 0, to 20 6, M 4 x to ,5 91 M 4 x to ,5 114 M 6 x ,5 2, to M 8 x ,5 4, to ,5 171,5 M 12 x Screw eavy-duty version ase body made of cast steel, lever parts and drive rod made of tempered steel model F1 k F2 k 1 W to M 8 x to M12 x to M12 x Screw Combination clamp Positioning and clamping in one work step Robust and stable construction Easy removal of workpiece thanks to fully retracted clamping arm galvanised and passivated case-hardened with greased bushings Rivet made of stainless steel Oil-resistant grip with large hand grip surface and soft component model F1 k F2 k 1 W1 W2 2 2,0 2,0 46, to to , ,0 3,0 55, to to , ll prices in euro, VT excluded Protective caps for quick release clamp Made of oil-resistant neoprene to protect delicate workpieces the protective cap sizes correspond to the size of the clamping screws suitable for model Width eight , , Prices in bold print = delivery ex stock

orizontal acting toggle clamp Quick-release lever based on a toggle mechanism Wide and rapid opening of the clamp, complete exposure

opening when machining workpieces pplication: rilling, welding, bending, grinding, testing and assembling Galvanized and passivated,

Stainless steel version available on request With open supporting arm and horizontal base model F1 k F2 k 1 W 0 0,3 0,4 15 23-5 to 2

3 1,8 2,5 33 48-1 to 11 8 72 206 M 8 x 45 467015 0003 4 2 3 44 74-6 to 23 10 111 281 M 8 x 65 467015 0004 4157 1 Screw With open

40 119 M 5 x 30 467017 0001 2 1 1,2 40 59 7 to 16 6 64 162 M 6 x 35 467017 0002 3 1,8 2,5 48 64 8 to 20 8 72 206 M 8 x 45 467017

supporting arm and angled foot model 40-178 F1 k F2 k 1 W 1 0,8 1,1 57 68 6 to 14 5 40 119 M 5 x 30 467020 0001 2 1 1,2 74 89 20 to

178 orizontal acting toggle clamp Quick-release lever based on a toggle mechanism Wide and rapid opening of the clamp, complete exposure of the workpiece high power transmission with low force application, large clamping forces Self-locking prevents the clamp from opening when machining workpieces pplication: rilling, welding, bending, grinding, testing and assembling Galvanized and passivated, case-hardened with greased bearing bushings Rivet made of stainless steel complete with tempered, galvanised clamping screw Stainless steel version available on request With open supporting arm and horizontal base model F1 k F2 k 1 W 0 0,3 0, to M 4 x ,8 1, to M 5 x , to M 6 x ,8 2, to M 8 x to M 8 x Screw With open supporting arm and vertical base model F1 k F2 k 1 W 0 0,3 0, to M 4 x ,8 1, to M 5 x , to M 6 x ,8 2, to M 8 x to M 8 x to M 8 x Screw with open supporting arm and angled foot model F1 k F2 k 1 W 1 0,8 1, to M 5 x , to M 6 x ,8 2, to M 8 x to M 8 x Screw

Magnetic clamp (Orga-Magnet) White with red imprint Raw magnet on the interior Price per PU = 4 pieces Ø eight Retention force 36 8,5 9,5 4 471021 0035 4161 Flat pot

unavoidable from a manufacturing technology perspective. These do not impair the function of the holding magnets in any way.

Countersink/counterbore 90º 1,6 14 4 471005 0016 20 4,2 9 6 Countersink/counterbore 90º 2,1 27 9 471005 0020 25 5,5 11 7 Countersink/counterbore 90º 2,5 36 16 471005

6,5 24 14 3 290 195 471005 0063 80 6,5 11,5 18 3 540 480 471005 0080 100 10,5 34 22 3 680 820 471005 0100 4161 Flat with internally threaded journal ±0,2 d1 d2 t l

471010 0020 25 8 M 4 8 15 7 40 22 471010 0025 32 8 M 4 8 15 7 80 32 471010 0032 40 10 M 5 10 18 8 125 60 471010 0040 50 12 M 6 12 22 10 220 110 471010 0050 63 15 M 8

pressing or gluing in the mounting hole Minimum retention force g 10 4,5 4 2 471020 0010 13 4,5 10 3 471020 0013 16 4,5 20 5 471020 0016 20 6 30 10 471020 0020 25 7

0100 125 26 1300 1680 471020 0125 4161 flat with externally threaded journal ground holding surface h Thread Minimum retention force g 16 11,5 4,5 M 3 18 6 470150

179 Magnetic clamp (Orga-Magnet) White with red imprint Raw magnet on the interior Price per PU = 4 pieces Ø eight Retention force 36 8,5 9, Flat pot magnets Galvanised surfaces, shielded system pplication temperature up to 200º C ote: airline cracks on the holding surface of the incorporated magnetic material are unavoidable from a manufacturing technology perspective. These do not impair the function of the holding magnets in any way. other dimensions available on request flat with bore hole ore hole with counterbore d1 d2 ll prices in euro, VT excluded l h t Minimum retention force g 16 3,3 7 4,5 Countersink/counterbore 90º 1, ,2 9 6 Countersink/counterbore 90º 2, , Countersink/counterbore 90º 2, , Countersink/counterbore 90º 2, , Countersink/counterbore 90º 2, , , ,5 11, , Flat with internally threaded journal ±0,2 d1 d2 t l h±0.2 Minimum retention force g 10 6 M ,5 4, M ,5 4, M ,5 4, M M M M M M M M M Flat for pressing or gluing in the mounting hole Minimum retention force g 10 4, , , flat with externally threaded journal ground holding surface h Thread Minimum retention force g 16 11,5 4,5 M M M M ,5 10,5 M M Prices in bold print = delivery ex stock

Pot magnets ar gripper smooth, without fi tting tolerance Galvanised surface, shielded system, application temperature up to 400º C When changing the holding

2 1 T Minimum retention force g 6 20 M3 5 1,7 3 471025 0006 8 20 M3 5 4 6 471025 0008 10 20 M4 7 8,5 10 471025 0010 16 20 M4 5 20 25 471025 0016 20 25 M6 7 45 55

5 45 61 471045 0020 25 35 13 100 140 471045 0025 32 40 9 190 240 471045 0032 4161 Magnetic pick-up tool Polished, fl exible brass hose strong magnet at the end

consisting of a chrome-plated metal sleeve applied permanent magnet Magnet Ø ead length Total length 5 40 150 471060 0050 8 40 175 471060 0080 4161 Set in wooden

180 Pot magnets ar gripper smooth, without fi tting tolerance Galvanised surface, shielded system, application temperature up to 400º C When changing the holding surface, no more than 2 may be removed as otherwise the holding power falls signifi cantly. round (bar gripper with inside thread) ±0,2 ±0.2 1 T Minimum retention force g 6 20 M3 5 1, M M4 7 8, M M M M round (bar gripper) Rod grips can be shortened by the dimension without any loss of holding power. ±0,2 ±0.2 Minimum retention force g , , Magnetic pick-up tool Polished, fl exible brass hose strong magnet at the end Traction Magnet Ø argest Ø lind-hole magnets Magnetic head consisting of a chrome-plated metal sleeve applied permanent magnet Magnet Ø ead length Total length Set in wooden box Magnet Ø 1, Permanent magnet block Stable, pressure-resistant block with inset holding magnets pplication temperature up to 100º C ttachment method: Injection, gluing Type with M6 thread at the rear Type imensions x W x Minimum retention force g 26 x 26 x x 26 x

Pocket magnet small version in bridge shape For workshops and model makers Supplied with protection plate C Minimum retention force kg 11,3 21,4 7,8 6,5 20 0,012 471004 0802 25,3 28,5 8 7 35 0,026

471071 0812 29,5 44,4 28,6 22,2 5,8 120 0,197 471071 0813 35 58 44 28 8 230 0,5 471071 0814 4161 ar magnet Round or rectangular cross-section otch marks the respective same pole rectangular ength

181 Pocket magnet small version in bridge shape For workshops and model makers Supplied with protection plate C Minimum retention force kg 11,3 21,4 7,8 6,5 20 0, ,3 28, , Powerful magnet in bridge shape With powerful magnetic force through-hole C E Minimum retention force kg 20,3 30,4 20, , ,4 38,1 25,4 19, , ,5 44,4 28,6 22,2 5, , , ar magnet Round or rectangular cross-section otch marks the respective same pole rectangular ength round Width eight per pair g , , ength Ø per pair g Pot magnet especially strong magnet, embedded in aluminium pot Fastening screw thread at the upper side of the magnet Supplied with protection plate Ø eight Thread Minimum retention force g M M ,4 M M M Flat pot magnet with through-hole and counterbore on the holding surface Magnets can be attached from below especially fl at version Ø ll prices in euro, VT excluded eight ore hole Ø Minimum retention force g , , ,1 4, Prices in bold print = delivery ex stock

utton magnet split holding surface and through-hole Supplied with protection plate Ø eight ore hole Ø Minimum retention force g 12,7 9,5 4,7 7 6 471066 0821 19 12,7 5,2 19 20 471066 0822 25,4 19,5

impinged between the magnetic fl oats, the upper panels then repel each other and are easily separated Supplied in pairs Price per pair Width at the terminals eight Width ore hole Ø per pair kg 73 75

182 utton magnet split holding surface and through-hole Supplied with protection plate Ø eight ore hole Ø Minimum retention force g 12,7 9,5 4, ,7 5, ,4 19,5 5, , Permanent magnetic float gauge for separating stacked iron sheet and sheet steel y means of induction using identical poles, the panels are impinged between the magnetic fl oats, the upper panels then repel each other and are easily separated Supplied in pairs Price per pair Width at the terminals eight Width ore hole Ø per pair kg M M Multiple angle magnet as a welding and assembly aid With angles 30, 45, 60, 75, 90, 180 imensions ore hole Ø Minimum retention force kg 100 x 64 2 x , Permanent magnetic joint as a aid for holding panels and fl at sectional iron Connected by steel joint any angle setting possible imensions per block ength Width Retention force per block da kg 60 x 26 x , x 26 x , igh quality for great performance. djustable wrenches by TOR: innovative combination of materials perfect feel best resilience exact adjustment This is but one example of TOR s high-quality hand tools

Permanent magnetic bevelling holder s a welding and assembly aid for frames and angles 45 angular surface and magnetic v-blocks ength bottom ength top Width eight kg 145 70 41 44,5 1,36 471560 0923

imensions x W x Minimum retention force kg 108 x 108 x 94 400 6 471561 0925 60 x 60 x 42 100 0,85 471561 0926 4161 Permanent magnetic v-block 2 magnetic contact surfaces are switched on and off

Ø per unit kg Price / Piece Price / Pair (MP) 67 96 80 0,004 6-66 2,85 471531 0935 471532 0935 70 96 100 0,004 6-70 3,8 471531 0934 471532 0934 4161 4161 Permanent magnetic v-block joint Two

183 Permanent magnetic bevelling holder s a welding and assembly aid for frames and angles 45 angular surface and magnetic v-blocks ength bottom ength top Width eight kg ,5 1, ,5 1, Permanent magnetic bit holder 3 prismatic and 3 fl at sides with 45 and 90 angles infi nitely variable magnetic force for the exact alignment of workpieces imensions x W x Minimum retention force kg 108 x 108 x x 60 x , Permanent magnetic v-block 2 magnetic contact surfaces are switched on and off simultaneously Front face ground at a precise angle to both prisms V-block pair precisely ground to the same height Supplied individually or in pairs (=MP) Width eight ength eight tolerance Workpiece Ø per unit kg Price / Piece Price / Pair (MP) , , , , Permanent magnetic v-block joint Two switchable magnetic blocks with V-block for round workpieces and fl at clamping device for panels etc. connected by steel joints any angle setting possible escription ength Width eight Retention force per block da kg Prism joint complete ,5 70 5, Single block , Magnetic pole blocks adjusted and numbered in pairs Can be used on every magnetic chuck with parallel pole pitch orizontal and vertical application Pole pitch: 3 steel, 1 brass Slats on the pole blocks must point in the direction of the poles of the magnetic chucks! Price per pair Width ll prices in euro, VT excluded ength eight kg , Prices in bold print = delivery ex stock

amella pole blocks iff erent versions with longitudinal or transverse pole pitch Pole pitch: 3 steel, 1 brass for machining geometric and irregular workpieces pplication in connection with magnetic

100 (with prism) engthwise 471540 0007 80 x 50 x 80 diagonal 471540 0010 4161 Permanent magnetic clamping block not switchable blocks to C consist of a permanent magnet system with fi ne pole pitch

3 Magnetic endurance is unlimited under the prevailing conditions of industrial production blocks can be ground and honed to half their height without signifi cantly impairing the holding power size

angle deviation Pole pitch 100 100 50 5 4 dhesive surfaces 1 Surface 100x100 2 surfaces 100x50 kg 3,6 471550 0001 100 50 50 5 4 3 surfaces 100x50 1,7 471550 0002 C 100 25 25 5 4 2 surfaces 100x25

184 amella pole blocks iff erent versions with longitudinal or transverse pole pitch Pole pitch: 3 steel, 1 brass for machining geometric and irregular workpieces pplication in connection with magnetic chucks imensions x W x Pole pitch 70 x 48 x 100 engthwise x 22 x 72 diagonal x 41 x 100 diagonal x 40 x 65 (with prism) diagonal x 40 x 100 (with prism) engthwise x 50 x 80 diagonal Permanent magnetic clamping block not switchable blocks to C consist of a permanent magnet system with fi ne pole pitch which is eff ective at 2 to 3 surfaces (polishing: 4 ) for clamping extremely thin steel workpieces = version with a fi ne pole pitch of 1.3 Magnetic endurance is unlimited under the prevailing conditions of industrial production blocks can be ground and honed to half their height without signifi cantly impairing the holding power size 60 x 60 x 150 switchable also available on request Type Type Type ±0.15 ±0.15 ±0.15 Max. angle deviation Pole pitch dhesive surfaces 1 Surface 100x100 2 surfaces 100x50 kg 3, surfaces 100x50 1, C surfaces 100x25 0, ,3 2 surfaces 100x25 0, Type C Type bars For clamping non-magnetic materials Ferro-magnetic metal ong side with spring-loaded bar (pull-down eff ect) Price per pair 1. Magnetic plate 2. Workpiece 3. bar C , , ,

Sine plate with permanent magnetic chucks EOIMIO For precise angle grinding and erosion work Rotatable via the longitudinal axis from 0 to 45 For small and large workpieces ase plate precision-ground

01:100 Sealed against dirt and coolant Supplied with 2 stopper bars and chuck key Mounting iron, straight ength Width eight kg 140 70 67 5,5 472104 0140 175 100 76 10 472104 0175 250 150 79 21,5

185 Sine plate with permanent magnetic chucks EOIMIO For precise angle grinding and erosion work Rotatable via the longitudinal axis from 0 to 45 For small and large workpieces ase plate precision-ground and hardened to 60RC Parallelism tolerance 0.01:100 Sealed against dirt and coolant Supplied with 2 stopper bars and chuck key Mounting iron, straight ength Width eight kg , , , Permanent magnetic chucks EOIMIO For precise grinding and erosion work Exceptionally long service life with particularly narrow pole pitch Universal clamping of small, thin and large workpieces ual neodymium magnet system generates up to 130/cm² in retention force special switching system prevents deformation during the switching process Sealed against coolant Possible wear-down of the pole plate 5 Supplied with 2 stopper bars, 2 clamping jaws and hexagon key further sizes available on request ength Width eight kg emagnetisers Table-top demagnetiser ow power consumption Field strength increases depending on workpiece volume further sizes available on request Connection ll prices in euro, VT excluded ength Width eight Frequency z 230 V andheld demagnetiser For bulky parts, usable surface up to 150 x 75 ight housing made of plastic further size available on request Connection ength Width Frequency z 230 V Prices in bold print = delivery ex stock

O U VEU UEVO Permanent electric magnetic chuck P With quadratic pole pitch Threaded holes in the pole springs for pole extensions and stoppers Simple connection between control unit and magnetic

to solid monobloc construction EW UOVO Y Model P50 Pole dimensions 50 x 50 Force/pole without air gap 350 da Width ength eight kg umber of terminals 300 340 69 52 16 473075 3034 300 640 69 98 32

186 O U VEU UEVO Permanent electric magnetic chuck P With quadratic pole pitch Threaded holes in the pole springs for pole extensions and stoppers Simple connection between control unit and magnetic chuck by means of quick connector igh pole density, for machining small/medium-sized workpieces of low strength o deformation from electro-permanent technology Minimal mechanical deformation thanks to solid monobloc construction EW UOVO Y Model P50 Pole dimensions 50 x 50 Force/pole without air gap 350 da Width ength eight kg umber of terminals Model P70 Pole dimensions 70 x 70 Force/pole without air gap 690 da Width ength eight kg umber of terminals Remote control for control unit With autonomous monitoring of all connecting cables including magnet coil RMC1 with retention force regulation Magnetic holder on the rear side for easy attachment escription Model RMC-1 with cable and retention force regulation Model RMC-3 with cable Pole extension for model P50 escription ength Width eight Mobile Rigid with edge Rigid with round hole Rigid with round hole Pole extension for model P70 escription ength Width eight Mobile Rigid with edge Rigid with round hole Rigid with round hole

O U VEU UEVO Permanent hoisting magnet SV UX two-pole construction Enormous lifting capacity due to neodymium high-energy magnets igh load-bearing capacity even with air gap suitable

168 19 472530 0500 EO 1000 316 148 216 36 472530 1000 4164 Permanent hoisting magnet SR ifter With patented test position for safe lifting Min.

187 O U VEU UEVO Permanent hoisting magnet SV UX two-pole construction Enormous lifting capacity due to neodymium high-energy magnets igh load-bearing capacity even with air gap suitable for round and fl at material Smooth-running on/off switch with safety lock extremely compact, lightweight robust and low maintenance for lifting panels, profi les, plates, round and bar stock, e.g. for loading and unloading machines Supplied with individual test certifi cate model ength Width eight kg EO EO EO EO Permanent hoisting magnet SR ifter With patented test position for safe lifting Min. safety factor 3 Compact and light construction Suitable for fl at and round materials Construction requires no maintenance Switchable via handle, with safety lock Switched on and off using one hand. EW UOVO Y With safety bolts model ength Width eight ifting capacity kg kg S , S , S S S igh quality for great performance. Multiple clamps by TOR: high-strength materials quick and exact clamping of multiple workpieces highest clamping force This is but one example of TOR s high-quality clamping tools. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

188 ifting belt ccording to E made of polyester, two layer design with two reinforced loops at both ends (width of the loops approx. 0.5 x sling width) further sizes available on request 1 Width 2 colour oad bearing capacity direct kg oad bearing capacity corded kg oad bearing capacity single sling up to 7 kg oad bearing capacity single sling 7-45 kg oad bearing capacity single sling kg Violet Violet green Yellow Yellow grey red Round sling RS ccording to E made of polyester, double construction With woven tonnage stripes further sizes available on request 1 Width colour oad bearing capacity direct kg oad bearing capacity corded kg oad bearing capacity single sling up to 7 kg oad bearing capacity single sling 7-45 kg oad bearing capacity single sling kg Violet green Yellow Violet green Yellow Yellow Violet green Yellow ocking lashing belt ZGK ccording to E Made of polyester, one-piece model Traction da ength ZGK Yellow Width colour Ratchet tie-down strap ZGR ccording to E Made of polyester, two-piece, with two pointed hooks further sizes available on request model Traction da ength ZGR SP Yellow ZGR SP Yellow ZGR SP Yellow ZGR SP orange Width colour

Edge protection bracket Made of cut-resistant polyurethane With slots for easy fi tting and attachment to the round sling W = Max.

gear at the edges of the workpiece Other models, e.g. articulated design, available on request kg 65 100 1 478003 0065 478004 0065 100 100 1,2

189 Edge protection bracket Made of cut-resistant polyurethane With slots for easy fi tting and attachment to the round sling W = Max. load that can be lifted with a direct in-line pull using the lifting gear model Ø ength W kg PU-KSW PU-KSW Edge protection profile Made of stable but fl exible polypropylene model Width eight ength Thickness ZGZ-KSP-PP Edge protector easy to handle For protecting the textile hoisting gear at the edges of the workpiece Other models, e.g. articulated design, available on request kg , , igh quality for great performance. Tool carts by TOR: highly resilient materials extremely flexible compartments will not topple over even when drawers are open easy in and out of the drawers drawer stop to prevent simultaneous opening of more than one drawer This is but one example of TOR s high-quality workshop furnishings. ll prices in euro, VT excluded Prices in bold print = delivery ex stock

Slinging rope Regular inspection by the relevant professional association Rated strength of the wires 1770 /² Galvanised with interior fi bres Versions with higher load strength and longer usable

190 Slinging rope Regular inspection by the relevant professional association Rated strength of the wires 1770 /² Galvanised with interior fi bres Versions with higher load strength and longer usable lengths available on request Rope Ø Working length oad bearing capacity kg Joker-aken easy to handle For all coon round slings and lifting straps Forged with special 8-Plus quality igher forged lobes to protect the textile lifting straps W = Max. load that can be lifted with a direct in-line pull using the lifting gear W kg 1 2 F G kg , , , , , , Chain slings with hooks Complete with safety load hook, quality grade 8 In accordance with I One-strand ominal chain Ø Working length Working load kg

Two-strand ominal chain Ø Four-strand Working length Working load 0-45 kg Working load 45-60 kg 6 1000 1600 1120 478031 1060 7 1000 2120 1500 478031 1070 8 1000 2800 2000 478031 1080 10 1000 4250

2000 7500 5300 478031 2130 16 2000 11200 8000 478031 2160 4138 ominal chain Ø Working length Working load 0-45 kg Working load 45-60 kg 6 1000 2360 1700 478033 1060 7 1000 3150 2240 478033 1070 8

478033 2080 10 2000 6700 4750 478033 2100 13 2000 11200 8000 478033 2130 16 2000 17000 11800 478033 2160 4138 Shackle igh-strength design with threaded bolts W = Max.

191 Two-strand ominal chain Ø Four-strand Working length Working load 0-45 kg Working load kg ominal chain Ø Working length Working load 0-45 kg Working load kg Shackle igh-strength design with threaded bolts W = Max. load that can be lifted with a direct in-line pull using the lifting gear Straight form W kg ll prices in euro, VT excluded C kg 330 9, , , , , , , , , , , , , , , , , ent form W kg C kg 330 9, , , , , , , , , , , , , , , , , Prices in bold print = delivery ex stock

ever hoists Very versatile, for lifting, pulling and clamping minimum own weight Free-wheeling mechanism for feeding out the uncharged chain Self-acting, fully enclosed load brake igh-quality

da kg E 750 1 5.6 29 6,2 122 140 266 88 280 472557 0750 1500 1 7.

oad chain thickness everage force approx.

192 ever hoists Very versatile, for lifting, pulling and clamping minimum own weight Free-wheeling mechanism for feeding out the uncharged chain Self-acting, fully enclosed load brake igh-quality precision transmission 1.5 m lifting height, can be extended on a meter basis on request Standard lever hoists oad bearing capacity kg Chain strands oad chain thickness everage force approx. da kg E , , , Mini-lever hoist oad bearing capacity kg Chain strands oad chain thickness everage force approx. da kg Wall-mounted crane with spur gear hoist or electric chain hoist Pivoting range 180 esigned in accordance with I /2 additional designs available on request: embracing bracket, locking mechanism, adjustable slewing range stops, weather guard Supplied ex works azardous area version, hot dip galvanised or top coat as well as electric chain hoist and spur gear hoist without steel construction available on request oad bearing capacity kg C k 24/98R 62/05R 1 ift speed m/min 24/98R Spur gear hoist 62/05R electric chain hoist ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 2, ,0 / 1, ,0 / 1, ,0 / 1, ,0 / 1, ,0 / 1, ,0 / 1, ,0 / 1, ,0 / 1, ,0 / 1,

Pillar jib crane with spur gear hoist or electric chain hoist Pivoting range 270 esigned in accordance with I 15018 2/2 additional designs available on request: base plate for dowel attachment,

well as electric chain hoist and spur gear hoist without steel construction available on request oad bearing capacity kg C k 24/98R 62/05R Foot size ift speed m/min 24/98R Spur gear hoist 62/05R

193 Pillar jib crane with spur gear hoist or electric chain hoist Pivoting range 270 esigned in accordance with I /2 additional designs available on request: base plate for dowel attachment, anchor bolts and template, raised lower edge of jib 100, locking mechanism, adjustable slewing range stops, weather guard Supplied ex works azardous area version, hot dip galvanised or top coat as well as electric chain hoist and spur gear hoist without steel construction available on request oad bearing capacity kg C k 24/98R 62/05R Foot size ift speed m/min 24/98R Spur gear hoist 62/05R electric chain hoist / / / / / / / / / / / / / / / / / / / / / / / / 1, / 1, / 1, / 1, / 1, / 1, / 1, / 1, ll prices in euro, VT excluded Prices in bold print = delivery ex stock

www.atorn.de igh quality for great performance.

194 igh quality for great performance. igital slide callipers by TOR: high-quality materials maximum precision quick and reliable measuring results waterproof and with best resilience This is but one example of TOR s high-quality measuring tools.

Clamping Tools

Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

More information

BEST OF 2014 January December

Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

enduring. Drill Chucks NC-Tooling 2013/2014

enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type

More information

Live and Dead Centres

s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for

More information

Geared scroll chuck with optimized design

Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

tough. Live Centers Face Drivers 2013/2014

tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers

More information

Chuck size

Chuck size URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck

More information

Geared scroll chuck with optimized design

More information

PROVEN CHUCK WITH SPIRAL RING

PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Geared scroll chucks with independently adjustable jaws

Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

Taper shank arbors for drill chucks

KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole

More information

Braze line (form R/GR) Extract from DIN 806, DIN 228 and BRUCKNER WORKS STANDARD

Braze line (form R/GR) Extract from DIN 806, DIN 228 and BRUCKNER WORKS STANDARD Carbide ead Centres BRUCKNER WORKS STANAR BRUCKNER WORKS STANAR Our high performance live centres standard as well as special designs are produced and tested according to our works standard. Materials,

More information

QUICK-ACTING JAW CHANGE SYSTEM

QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire

More information

POWER CHUCKS KTN / KTG / KS

POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer

More information

LATHE CHUCKS INDEPENDENT CHUCKS

LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and

More information

TURNING AND MILLING IN ONE SET-UP

TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The

More information

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF A selection of our most popular products. To view the complete range visit BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

More information

PROVEN CHUCK WITH SPIRAL RING

More information

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit

More information

ZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS

ZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

JAWS INDIVIDUALLY ADJUSTABLE

JAWS INDIVIDUALLY ADJUSTABLE JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT

More information

ZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy

ZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6 NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

ER Collets Nuts Disks

ER Collets Nuts Disks Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

More information

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273, Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

More information

LATHE CHUCKS INDEPENDENT CHUCKS

LATHE CHUCKS INDEPENDENT CHUCKS LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths

More information

Steel / Cast iron body Independent chucks

Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design

More information

Economy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.

Economy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates. Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be

More information

JAWS INDIVIDUALLY ADJUSTABLE

JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072

More information

Standard Parts for Mould Making

Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves

More information

CAPTIS. The modular and flexible system for internal and external clamping

CAPTIS. The modular and flexible system for internal and external clamping NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high

More information

KFD. Power chucks without through-hole. Technical features:

KFD. Power chucks without through-hole. Technical features: K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned

More information

USE-USU. Steel independent chucks. Steel independent chucks USE-USU

USE-USU. Steel independent chucks. Steel independent chucks USE-USU USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually

More information

Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors

Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose

More information

Collet Chucks and Collets

Collet Chucks and Collets ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16

More information

> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar

> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information

L Standard Parts for Mould Making

L Standard Parts for Mould Making A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

CoA. Constant Face Drivers. Constant Face Drivers CoA

CoA. Constant Face Drivers. Constant Face Drivers CoA CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting

More information

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

More information

HSK F80 MAKINO S HRINK FIT C H UCK S

Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4

More information

Swiss Automatic Tooling

Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets

More information

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections

A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

KFD-HE. Power chucks with through-hole

KFD-HE. Power chucks with through-hole K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating

More information

GTO Precise, universal stationary chuck for collets

GTO Precise, universal stationary chuck for collets Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest

More information

Standard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.

Standard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade. Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as

More information

CONVENTIONAL WORKHOLDING

simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice

More information

Collet Chuck manual 08/2010

Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back

More information

Centres-Live Chucks Type

Centres-Live Chucks Type 300-422 Face Drivers Type 300-303 with mechanical compensation 2 4 5 6 7 3 8 9 1 Very large bearing surface. Housing moves with centre to compensate for diefferent sizes of component

More information

TWIST DRILLS AND COUNTERBORES

TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting

More information

OKLADKA ROZDZIALU 2405-K

OKLADKA ROZDZIALU 2405-K OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our

More information

ZERO-POINT CLAMPING SYSTEM

simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Hydraulic Drive Unit Type Techn. Doc. No. 362 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580067000_Inst_en_Version_03 Repair General In general,

More information

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders

More information

Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements

Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements 8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.

More information

KFD-HE. Power chucks with through-hole

KFD-HE. Power chucks with through-hole K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.

More information

Contents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy

Contents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...

More information

Pneumatic spindles Pneumatic built-in motors

Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial

More information

Flexible Couplings 44

Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact

More information

This is trial version

This is trial version Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.

More information

WORKHOLDING SYSTEMS

www.ptgworkholding.co.uk WORKHOLDING SYSTEMS INSTALLATION & PRE-LOADING INSTRUCTIONS INSTALLATION & PRE-LOADING INSTRUCTIONS Pre-load Flats Machine Drawbar M/C Spindle Pre-load Adjustment Screw Mandrel

More information

ACE LOCK Milling Chucks

ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter

More information

Driven Toolholders for MAZAK Machines

Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /

More information

Industrial Drill Chucks & Live Centers

Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool

More information

The original quick jaw change power chuck. High repeatability when changing jaws

Fast changeover, fast payback: The original quick jaw change power chuck KNCS N Easy lubrication even on vertical machines with 3 radial builtin grease ﬁttings Minimal setup times Jaw change in less than

More information

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P: PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13

Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний Штрай Москва, ул. Островитянова, 13 Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155

More information

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6 tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert

More information

Pneumatic Corner Drill

Maschinenfabrik GmbH Pneumatic Corner Drill Type 2 1602 0030 Illustration can differ from the original Operation and Maintenance Manual Compiled: 31.07.08 216020030_en.doc Page 1 of 12 TECHNICAL SPECIFICATION

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

MAGNETIC-STAND DRILLING MACHINES. profiline

MAGNETIC-STAND DRILLING MACHINES profiline Comparison of technical data RS4 - RS40e - The New RS GENERATION! RS20 / RSM20 Technical data RS4 RS5e RS10 RS20 RSM20 Mag. clamping force: 10.000 N 10.000 N

More information

POWER CHUCKS CYLINDERS / STEADY RESTS

POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive

More information

Multi-Lock Milling Chuck

Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting

More information

NSK Standard Ball Screws High Speed SS Series

NSK Standard Ball Screws High Speed SS Series NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard

More information

Repair Manual and Spare Parts List

Repair Manual and Spare Parts List Pneumatic Drive Unit Type Techn. Doc. No. 352 and Accessories for Pipe Cutting Machine Darstellung kann vom Original abweichen Repair Manual and 580027000_Inst_en_Version_02 Repair General In general,

More information

Standard Programme Clamping Technology. The tool specialists for the trade.

Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik

More information

DRILL CHUCKS-KEY TYPE

DRILL CHUCKS-KEY TYPE HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all

More information

KLINGER Piston Valves KVN DN PN 16 I/III with valve ring KX-GT Modul

KLINGER Piston Valves KVN DN PN 16 I/III with valve ring KX-GT Modul Page 1 Assembly Instructions and Handling Regulations for KLINGER Piston Valves KVN DN 65 150 PN 16 I/III with valve ring KX-GT Modul DN 125-150 1 Body 2 Bonnet 3 Hand wheel 4 Piston 5 Lantern bush 8 Threaded

More information

Solid carbide Twist Drills Overview

Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ

More information

Operating Instructions Thread Rolling Heads F 001, F 01, K 01-1

Operating Instructions Thread Rolling Heads F 001, F 01, K 01-1 Head in fixed application (for F and K types): The front part of the head is turned by using the handle (25) with the ball (23) (if used on automatics, closing is accomplished by using closing roller over

More information

DURO-NC. Power chucks with quick-acting jaw change system. Technical features:

DURO-NC. Power chucks with quick-acting jaw change system. Technical features: K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted

More information

KFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:

KFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features: Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding

More information

CCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12

CCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12 AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3

More information

Amarillo PUMP DRIVES (250 HP THROUGH 350 HP) INSTRUCTIONS FOR REPAIRING MODELS 250, 300, and 350

Amarillo PUMP DRIVES (250 HP THROUGH 350 HP) INSTRUCTIONS FOR REPAIRING MODELS 250, 300, and 350 Amarillo Right Angle Pump Drives, if properly installed and maintained, should provide years of service

More information

In-Line Positive Feed Tools

In-Line Positive Feed Tools ADVANCED DRILLING EQUIPMENT SP-1300-1-EN-0806-.25M 1-1 Introduction In-Line Positive Feed Tools How Positive Feed Drills Operate Our in-line positive feed drills use two interconnected

More information

The FEIN Programs. FEIN Power Tools

The FEIN Programs. FEIN Power Tools The FEIN Catalogue. Welcome to FEIN! Our current main catalogue for electrical power tools provides you with all the latest information in the field of power tool technology for commercial applications.

More information

> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation

> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross

More information

Good reasons to use Albrecht drill chucks

3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened

More information

ROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS

ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are

More information

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420) HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16

More information

GUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner

GUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY

More information

SERVICE PARTS LIST 1-1/8" ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg.

SERVICE PARTS LIST 1-1/8 ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg. 00 0 200 204 276 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS PAGE 1 OF 3 BULLETIN NO.

More information