Piston Seal CQ Profile
|
|
|
- Joseph Hill
- 6 years ago
- Views:
Transcription
1 Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile is a unique seal design that includes a rubber quad seal in the PTFE cap to ensure drift free performance. The PTFE cap is a stable rectangular shape and is energized, depending on its cross section, by a single square energizer or dual Parker s. The Q piston seal is commonly used in applications such as mobile hydraulics, lift trucks, standard cylinders and piston accumulators. Parker s Q profile will retrofit non-parker seals of similar design. The Q profile may be ordered without the energizer and quad seal by omitting the energizer/quad seal code. See part number nomenclature. Q ross-section Square Ring Q ross-section dual Technical ata Temperature Pressure Surface Standard Materials* Range Range Speed ap % bronze -200 F to 55 F 5000 psi < 9.8 ft/s filled PTFE (-129 to 302 ) (344 bar) (3 m/sec) Energizer/ 0 Nitrile -30 F to 250 F (-34 to 121 ) *lternate Materials: For applications that may require an alternate material, please see Section 3 for alternate PTFE (Table 3-4) and energizer (Table 3-5) materials. Pressure Range without wear rings (see Table 2-4, page 2-5). Options Notched Walls: dding an N to the end of the part number indicates that notches are to be added to the side walls of the PTFE cap. Notches can help optimize the seal s response to fluid pressure. In application, the void created by the notch allows fluid pressure to fill the cavity between the side face of the gland and the seal. onsult your local Parker representative for the availability and cost to add side notches to the Q profile. Metric: To configure metric part numbering, see Table -45 on page -52, and call your local Parker representative for availability. Q installed in Gland 02/15/08-48 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
2 atalog EPS 530/US Q Profile Part Nomenclature Q Profile Table -42. Q Profile Inch Q Profile Gland epth (x1000).193 X 1000 = 193 (x1000).12 X 1000 = 12 ompound 4-igit Material ode 0401 = 40% ronzefilled PTFE ore (x1000) X 1000 = Energizer/ Material ode = 0 Nitrile Omit = No energizer/ quad seal Option: Gland imension Q Profile Square Ring Gland epth Please refer to Engineering Section 2, Page 2-8 for surface finish and additional hardware considerations. Table -43. Q Gland imensions (Square Ring) Inch ore * ash Square Ring Part (Square Ring) Q Q Q Q Q Q Q Q Q Q Q Q Q /01/0-49 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
3 atalog EPS 530/US Q Profile Table -43. Q Gland imensions (Square Ring) Inch (ontinued) ore * +.004/ / / /-.004 ash Square Ring Part (Square Ring) Q Q Q Q Q Q Q Q Q Q Q NOTE: For sizes larger than those shown in the table, please contact your local Parker representative. Gland imension Q Profile ual Gland epth Please refer to Engineering Section 2, Page 2-8 for surface finish and additional hardware considerations. Table -44. Q Gland imensions (ual ) Inch ore * ash ual Q Part (ual ) Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q /01/0-50 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
4 atalog EPS 530/US Q Profile Table -44. Q Gland imensions (ual ) Inch (ontinued) ore * ash ual Q Part (ual ) Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q / / / / Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q / / / / Q Q Q Q Q /01/0-51 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
5 atalog EPS 530/US Q Profile Table -44. Q Gland imensions (ual ) Inch (ontinued) ore * ash ual Q Part (ual ) Q Q Q Q Q Q Q Q Q Q Q Q NOTE: For sizes larger than those shown in the table, please contact your local Parker representative. Part Nomenclature Q Profile Table -45. Q Profile Metric (mm) M Q ompound 4-igit Material ode (First digit 0 replaced with M for Metric) M401 = 15% Fiberglassfilled PTFE Profile Gland epth (mm) 06.5 = 6.5mm ore (mm) (3 digits; use leading zeros if needed) 012 = 12mm 120 = 120mm (mm) 8.3 = 8.3mm (Include decimal as needed) Energizer Material ode = 0 Nitrile Omit = No energizer/ quad seal Option: 09/01/0-52 Parker Hannifin orporation Engineered Polymer Systems ivision Phone:
Piston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
Piston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
Piston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
List Price. Part Number
162 style tp piston T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
Maximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
atalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
Wear Rings / Bearings
Wear Rings / Bearings Contents Product Offering... -3 Engineering... -4 Materials... -6 Wear Rings / Bearings Profiles WPT... -8 WRT... -12 PT... -16 PW... -20 Wear Rings / Bearings Parker offers a complete
TrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
Needle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, Parker utoclave ngineers has designed and built premium quality valves, fittings and
Needle Valves. 10V & SW Series. Needle Valves - 10V & SW Series. Low Pressure Valve Features: Low Pressure. Pressures to 15,000 psi (1034 bar)
Needle Valves Low Pressure 10V & SW Series Pressures to 15,000 psi (103 bar) Since 195 Parker utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
Compact Hydraulic Cylinders. Series CHE/CHD
ompact Hydraulic ylinders Series HE/H aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding atalog HY08-37-4/N ylinder pplication
atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
Surge Arresters. Surge Arrester/Type L Fuse Cutout Combination. Description. Construction. Connectors/Brackets
Surge Arresters Surge Arrester/Type L use ombination Electrical Apparatus 235-26 escription ooper Power Systems surge arrester/type L interchangeable fuse cutout combinations are available in a wide variety
SRX Series Stainless Steel Body Air Cylinders with Continuous Position Feedback
with Continuous Position Feedback P P1L SRX SR/SRM, SR/SRM Contents Features... 42 Cylinder Ordering Information... 43 Specifications... 44 Engineering Specifications... 45 imensions...46-50 Mechanical
Parker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker Autoclave Engineers: Fluid omponents Product atalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034
no adhesion effect on sliding surface, even after a long standstill superior performance over a wide range of temperatures and hydraulic fluids
Industrial Seal Inc. offers a wide range of hydraulic and pneumatic Piston seal profiles to meet the broad demands of the fluid power industry. These Piston seals are offered in a variety of compounds
Couplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
Female - Swivel. 45 Elbow. 45 Elbow (5000 psi) 16E78 B-96 16B78 B /2 Elbow. 60 Elbow 16N78 B Elbow. Female - Swivel Long 1C978 B-101
atalog 4400 US Visual Index Use with 781, 782T, 782ST hoses. 10178-94 10678-94 13978-94 NPTF Pipe Male - Rigid JI 37 ode 61 11578-94 1478-95 11778-95 14F78-95 11978-95 14N78-96 ode 62 (5000 psi) 1678-96
1501 KUEBEL ST. HARAHAN, LA 70123
style ps1400 glass filled ptfe piston seals The PS1400 seals offer low friction and high strength in a compact double-acting piston seal design. The PTFE seal ring, combined with a rubber energizer, assures
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
Introduction. Parker Hannifin is the industry leader for sealing system solutions for the fluid power industry.
Parker Hannifin is the industry leader for sealing system solutions for the fluid power industry. Parker EPS Division provides the most complete selection of dynamic seals for both OEM and MRO hydraulic
PVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59
Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &
1501 KUEBEL ST. HARAHAN, LA 70123
style tr rod t-seals T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
X-Rings & Multiseals. Low Friction Seals. Phone: Fax: Toll: (800)
Multiseals Low Friction Compression Seals Runs Circles Around O-Rings! After years of concentrated research, PAI has perfected synthetic rubber hydraulic and pneumatic seals that are far superior to O-
Diaphragm Accumulators AD Series
Parker Diaphragm Accumulators Feature: Operating Pressures to 250 Bar Capacities from.075 to 2.80 Liters Compact and Lightweight Low Cost, Non-Repairable Design Nitrile & Hydrin Diaphragms Durable Metric
GENERAL PURPOSE VALVE AB31 AB41 AB42 SERIES Discrete valve. Direct acting poppet structure Port size : Rc1/8, Rc1/4, Rc3/8, Rc1/2.
Series port direct acting solenoid valve : Open when energized, close when energized NRL PURPOS VLV SRIS iscrete valve irect acting poppet structure Port size : Rc/, Rc/, Rc/, Rc/ JIS symbol / (normally
PVL Series Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves zpv06
PVL Series Solenoid & Remote Pilot Operated /8" & /4" Valves zpv06 Section www.parker.com/pneu/pvl asic Valve unctions... 3 Stacking System Overview... 4 eatures (PVL & PVL)... 5 Part Numbers Stacking
Valvair Manual Spool Valves
Valvair anual Spool Valves ir ilot, anual & echanically ctuated Section www.parker.com/pneu irectair rass oppet irectair Viking 0 V / Z eatures & Specifications... 5 art umbers...5-5 Technical ata... 55
SRB Series. UL Recognized CSA Certified VDE Approved* Specifications. SRB Series. Power Inlet Filters & Power Entry Modules
orcom Product Guide atalog: 161 Issue ate: 6.11 Minimum epth, ost-effective Shielded Power Inlet Filter SR Series UL Recognized S ertified V pproved* SRP SRS8 SR1 SR2 SR Series Smallest depth orcom RFI
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
Series VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
P54 PISTON SEAL TECHNICAL DETAILS. Part Number Structure. Double-Acting F E A T U R E S P54 M R N HLX. Compact piston design.
PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite P54 is a double-acting, o-ring energized, low-friction piston seal that performs well in both high- and low-pressure systems. High-performance Armorlene
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
PARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
Sinclair Collins. Process Control Valves. For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi. Catalog SCV-100/USA April 2001
Sinclair Collins Process Control Valves For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi April 2001 The Diaphragm Operated Valves on the following pages are designed for directing, diverting
Table of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
Type 12 / 13 Enclosures
Type 12 Free-Standing Enclosures ata Sheet pplication Houses electrical controls and instruments Easy access fixed or swing panels for optional equipment ual-access construction available for back-to-back
Section 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
FlexiCase Rotary Seals Introduction
FlexiCase Rotary Seals Introduction Contents Engineering................. -3 Materials................... -6 Product Offering............. -7 What Is a FlexiCase and How Does It Work? FlexiCase FlexiSeal
Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic
atalog 0923/NA (10/01) Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended
Fittings, Tubing & Nipples
Fittings, Tubing & Nipples Medium s to 20,000 psi (1379 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
Miniature Solenoid Valves
Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat
April 2007 / BULLETIN Solenoid Valves. The right solenoid valve for any job.
pril 2007 / BULLETIN 30-10 Solenoid Valves The right solenoid valve for any job. Bulletin 30-10 / Page 1 Sporlan Solenoid Valves Benefits Molded coil for most sizes. lass "F" temperature rating oil types
7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H
7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations
RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy
RB NOK Asymmetrical Profile Rod U-Cup with Double Lip RB asymmetrical C-cup is suited for heavy duty mobile and stationary service when rod leakage must be kept to a minimum. Double lip design reduces
TrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:
Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product
SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)
SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow
Junction Boxes & Enclosures JBES Series: Pre-drilled 316L Stainless Steel Junction Boxes Increased Safety
Je10 Without Terminals ompliance ata: TEX - IE: TEX IE E Ex e II; Ex ia II; Ex ib II T6 to T5 Ex t 21 T80 to T95 Operating Temperatures: -50 to +70 199 TX Product atalog pplications: Terminal junction
E and VE Construction
E and VE Construction E Element VE Element Type E and VE elements combine rugged design and rigid construction features which make them ideal for moderate to heavy duty clutch and brake service. They are
Grease and Oil Injectors
Grease and Oil Injectors LIT099 AL-32 Grease Injector OVERVIEW The AL-32 Grease Injectors are designed for single line, high-pressure centralized lubrication systems. These injectors are available in
CG Series Visual Index
Series Visual Index Series Permanent 101 Male Taper Pipe Rigid 102 emale Taper Pipe Rigid 103 Male (I) 37 Rigid 105 Male Str. O-ring 106 S (I) 37 Swivel Series PRMNNT -53-54 -54-54 -55 107 emale Pipe Swivel
Flow Controls & Accessories
Flow ontrols & ccessories Section Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Right ngle Series... 6-9 Needle Valves SPN Series...10 338 Series...11 SP Series heck Valve...12 339
Parallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power and inst
Instrumentation Quick ouplings 1 Parker Hannifin orporation Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power
Isys Micro Series. Air Control Valves. Section E
Series ir ontrol Valves Section www.parker.com/pneu/micro X asic Valve unctions... asic Valve eatures... Product Overview... v harts...5 Plug-in Valve Part Numbers...6 Plug-in anifolds...7 Plug-in nd Plate
Tension Brakes/Air Cooled
IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.
Diagnostic, Orifice, Bleed Adapters and Specialty Fittings
iagnostic, Orifice, leed dapters and Specialty ittings The itting uthority 4300 atalog iagnostic, Orifice, leed dapters iagnostic Tees O6G5TP ORS Swivel / ORS / SE-OR XX6G5TP 37 Swivel / 37 lare / SE-OR
NEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
7" & 8" Bore zcy03 High Pressure Hydraulic Cylinders Series 3H
" & " ore zcy0 High Pressure Hydraulic s Series H Heavy Duty Service Industrial Tie-Rod onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For Division Plant Locations See Page II. 65
4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic
atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation
Series P2/P3 Variable Volume Piston Pumps
Variable Volume Piston Pumps A Bulletin HY13-2656-B1/US A3 Introduction General information The newly developed variable displacement piston pumps from Parker Hannifin, designated P2 and P3, are mainly
OSPE..BHD Belt-Driven Actuators
OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing
Falk V-Class Alignment-Free Drives
Gear atalog ownload the most up-to-date versions at www.rexnord.com Falk V-lass Alignment-Free rives (Inch) Falk V-lass Alignment-Free rive To learn more about the new Falk V-lass Alignment Free rive,
N Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D
Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information
L & S Series Linear Slides
& S Series inear Slides asic Selection S Series (short) single bearing block design, short overall length. (Photo this page) Series (long) double bearing block design, increased bearing support. (Photo
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
421WC A A-9 AX A-9 482TC A-10. Tough Cover SAE 100R1 TYPE AT 482ST A-10 BXX A A A-11
atalog 4400 US Hydraulic Visual Index 601-8 422-8 424-8 Hydraulic Hydraulic 421W -9 426-9 X -9 482T -10 S 100R1 TYP T Protective Wire over S 100R3 High Temperature S 100R1 TYP T Worldwide ISO 1436-1 TYP
Trio-Cut Circular Thread Milling Tools
Circular Threa illing Tools ore Ø Threa Page 4 6 x 2 5 9 20 x 7 52-53 22 24 x 20 54 26 30 x 25 55 n 3 Applications with only Tool n Threa illing n Threa illing with Unercut n rill illing n High Efficiency
RETROFIT TERMINAL UNITS
GENERAL PROUCT OVERVIEW Retrofit Terminal s Convert Constant Air Volume Systems to Variable Air Volume. Convert Constant Volume ual uct Systems to Variable Air Volume. Convert Multizone Systems to Variable
Parallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
Slip-in Cartridge Valves Series CE, CP. General Description. Features. Pilot Control for Directional Functions
General E, P and 2-way slip-in cartridge valves are hydraulically controlled seat valves that are designed for compact block installation. Slip-in cartridge, cover, and pilot system are valve elements
Ultra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
Polyseal Total Sealing Technology
ontents ompany Profile Product Range Index Product Range Section / Piston Seals Section B S/ Piston Seals Section Rod Seals Section Rod Wipers Section E Bearing rings Section F ORings & Backup Rings Other
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS Pressure Compensated Checkball Piston Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA
Series 2AJ & 2ANJ Rod Lock Air Cylinders. Catalog HY /NA July, 2014
Series 2J & 2NJ Rod Lock ir ylinders atalog HY08-09-/N July, 204 atalog HY08-09-/N Features, Benefits, Value ir ylinders Benefits of using a piston Rod Lock include: Prevents rod movement upon release
Male - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.
Visual Index 30182-166 31382-166 30282-167 37G82-167 NPTF Pipe Male - Rigid 30382-167 Male - Swivel 30682-168 Female - Rigid 33782-168 NPSM Pipe 33982-168 Gasket Joint 34182-168 JI 37 S Male - Rigid 30482-169
Medium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
SELF-CLINCHING STANDOFFS
SEF-INING STANOFFS Page 1 of 7 These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet. PEM
MK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
KREBS Technequip. TGW wafer style slurry valves. TGW series valves for slurry applications
KREBS Technequip TGW wafer style slurry valves TGW series valves for slurry applications 2 Technequip wafer style knife gate valves Applications Mining and mineral processing Mineral sands Cement Sand
Transportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
LESA Series TT Linear Electrohydraulic Servo Actuators
Vickers ylinders LS Series TT Linear lectrohydraulic Servo ctuators Designed specifically for wood products processing applications 5094.00/N/0797/ Introduction LS Series TT Linear lectrohydraulic Servo
Compact cylinders. Fixing dimensions are compliant to norm ISO 6431 or UNITOP. Suitable for standard fixing elements
ompact cylinders Fixing dimensions are compliant to norm 431 or Suitable for standard fixing elements igh reliability and long lifetime Standard magnetic version Special strokes on request aterials arrel:
^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical
Pilot Operated Stainless Steel Spool Valves xplosionproof Solenoid Valves 6 Stainless Steel odies /4" NPT / / SRIS 6/6 eatures Ideal for valve automation for the oil and gas market Reliable, robust design
Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
ADEX Series. Air Control Valves. Section D
X Series ir ontrol alves 00.0 v.8 v.47 v ort 5 ort /8" ort Section www.parker.com/pneu/adex X iking Z asic alve unctions...00 asic alve eatures...0 ommon art umbers / R Type alves...02 odel umber Index
3/2 ^ % Features. Construction. Electrical
4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing
Cable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
Single Socket and Horizontal Metering
GE Energy onnections Single Socket and Horizontal etering EP pproved Single Socket etering EP pproved pplication Information GE s Single Socket etering products are designed for residential use. They are
Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.
NXT NRATON lectronically nhanced Solenoid Valves rass and Stainless Steel odies 1/" - 2" NPT 2/2 3/2 /2 SRS eneration eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement)
High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
ADEX Series Air Control Valves A00.01 Cv M3 Port A05.18 Cv M5 Port A12.47 Cv 1/8" Port zpv02 A B C D E F G H. Section H
X Series ir ontrol alves 00.0 v ort 05.8 v 5 ort.47 v /8" ort zpv02 Section www.parker.com/pneu/adex asic alve unctions... 2 asic alve eatures... ommon art umbers / R Type alves... 4 odel umber Index /
VERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.
NXT NRATON lectronically nhanced Solenoid Valves rass and odies 1/" - 2" NPT 2/2 3/2 /2 eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
PDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387