2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

Size: px

Start display at page:

Download "2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)"

Buck Maximilian Sims
5 years ago
Views:

KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features

Multiple layers of adjustable PTFE chevron packing rings for standard model enable excellent fugitive emission control. Positive position indication. Locking device capable.

1 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment of body. low-out proof stem for safety. Sphericity tolerance of the ball is unsurpassed. Multiple layers of adjustable PTFE chevron packing rings for standard model enable excellent fugitive emission control. Positive position indication. Locking device capable. Heavy duty body construction. Machined ISO 5211 top mounting flange. Live load springs keep constant force on stem-seal packing, ensuring seal integrity and extended valve life. Dual shaft bearings for high cycle life operation. Higher v values and less cost for diverting which can be normally done with multiple installation of valves. General application Diverting or mixing fluids. Technical data 2 seats (L-port) Model: N Series Full bore: DN 4-2 (NPS 1½ - 8) Reduced bore: DN (NPS 5-1) Pressure rating: SME lass 15, 3 JIS 1K, 2K Temperature: (-2 F F) (Option: up to 5 /932 F) 4 seats (L and T-port) Model: M Series Full bore: DN 15-2 (NPS ½ - 8) Reduced bore: DN (NPS 5-8) Pressure rating: SME lass 15, 3 JIS 1K, 2K Temperature: -29 to 15 (-2 F - 32 F) 2 seats feature OM2 compatible, co-polymer E-seat as standard. Machined firesafe lip for metal touch to ball in case of fire. It also eliminates possibility of seat deformation. Lower operating torque, easing operation and reducing actuator cost. 4 seats feature Equipped with 4 seats so that each port can be used as an inlet. vailable with L-port and T-port for variety of applications. E-seat as standard for M11 and M21. Emerson.com/Finalontrol 217 Emerson. ll Rights Reserved. VTDS-2959-EN 18/2

2 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) 2-SETS (L-PORT) N Series - Full ore / N Series - Reduced ore 25 7,8, ,12 2, 21, Stem detail Note: the illustration shows body construction of 3-way ball valve, Model N11 in DN 8 (NPS 3) Parts List No. Description Material 1 ody F8M, F8, or W 2 ody cap F8M, F8, or W 3 all F8M or F8 4 Shaft 316 S/S or 34 S/S 5 Seat E-seat as standard (T or G seat for options) 6 Gasket R-PTFE 7 Gland bolt 193 (G) 8 8 Washer 316 S/S 9 Gland flange F8 1 Gland packing PTFE 11 Stud 193 (G) 8 or 193 (G) 7 12 Nut 194 (G) 8 or 194 (G) 2H 13 Live loading spring 34 S/S 14 nti-static spring 316L S/S 15 nti-static spring 316L S/S 16 Gland bearing PTFE 17 Thrust bearing PTFE 18 Shaft bearing R-PTFE 19 Snap ring 34 SS 2 Spring washer 34 S/S 21 olt 34 S/S 22 Washer 34 S/S 23 Stopper 34 S/S 24 Handle arbon steel 25 Indicator 34 S/S Options NE MR-1-75 Gratite seat for high temp. service (N Series, 2 seats} Extension bonnet for low temp. service (N Series, 2 seats) E Marking PED 97 / 23 / E Special tests - X-ray (RT) - Liquid penetrant (PT) - Positive Material Identification (PMI) 2

3 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - Metric 2-SETS (L-PORT) N Series - Full ore / N Series - Reduced ore W H H1 Ød L SME lass 15 / JIS 1K Dimensions - N11 ND N21 Full bore - N11 Reduced bore - N21 DN Ød L H W H1 Ød Ødo L H W H SME lass 3/ JIS 2K Dimensions - N12 ND N22 Full bore - N12 Reduced bore - N22 DN Ød L H W H1 Ød Ødo L H W H Note Ødo = bore opening diameter on reduced bore valves 3

4 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - Imperial 2-SETS (L-PORT) N Series - Full ore / N Series - Reduced ore W H H1 Ød L SME lass 15 / JIS 1K Dimensions - N11 ND N21 Full bore - N11 Reduced bore - N21 NPS Ød L H W H1 Ød Ødo L H W H1 1½ ½ SME lass 3/ JIS 2K Dimensions - N12 ND N22 Full bore - N12 Reduced bore - N22 NPS Ød L H W H1 Ød Ødo L H W H1 1½ ½ Note Ødo = bore opening diameter on reduced bore valves 4

5 2,21, ,14 9 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) 11 12,13 4-SETS (L ND T-PORT) M Series - Full ore / M Series - Reduced ore ,21, , , H H1 Stem detail , , Note: the illustration shows body construction of 3-way ball valve, Model M11 in DN 8 (NPS 3) L1 Parts List No. Description Material 1 ody F8M, F8, or W 2 ody cap F8M, F8, or W 3 all F8M or F8 4 Stem 316 S/S or 34 S/S 5 Seat E-seat as standard (G-seat an option) 6 Gasket PTFE 7 Thrust washer 316 S/S 8 Gland bolt 193 (G) 8 9 Gland flange F8 1 Gland packing PTFE 11 Snap ring 34 S/S 12 Stud 193 (G) 8 or 193 (G) 7 13 Nut 194 (G) 8 or 194 (G) 2H 14 Live loading spring 34 S/S 15 nti-static spring 316L S/S 16 nti-static spring 316L S/S 17 Gland bearing PTFE 18 Thrust bearing PTFE 19 Shaft bearing R-PTFE 2 Washer 34 S/S 21 Spring washer 34 S/S 22 olt 34 S/S 23 Snap ring 34 S/S 24 Stopper 34 S/S 25 Handle head arbon steel 26 Handle/pipe arbon steel 27 Indicator 34 S/S 15, , Options NE MR-1-75 E Marking PED 97 / 23 / E Special tests - X-ray (RT) - Liquid penetrant (PT) - Positive Material Identification (PMI) L Note Please consult us for 4 seats SME lass 3 valves (M12 and M22) 5

6 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - Metric 4 - seats (L and T - port) M Series - Full bore / M Series - Reduced bore W H H1 Ød L1 L SME lass 15 / JIS 1K Dimensions - M11 ND M21 Full bore - M11 Reduced bore - M21 DN Ød L L1 H W H1 Ød Ødo L L1 H W H Note Ødo = bore opening diameter on reduced bore valves Please consult us for 4 seats SME lass 3 valves (M12 and M22) 6

7 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - Imperial 4 - seats (L and T - port) M11 Full bore / M21 Reduced bore W H H1 Ød L1 L SME lass 15 / JIS 1K Dimensions - M11 ND M21 Full bore - M11 Reduced bore - M21 NPS Ød L L1 H W H1 Ød Ødo L L1 H W H1 ½ ¾ ½ ½ Note Ødo = bore opening diameter on reduced bore valves Please consult us for 4 seats SME lass 3 valves (M12 and M22) 7

8 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - Metric PRESSURE-TEMPERTURE RTINGs 6. DN 15, 2 FOR FULL ORE LEGEND: Dashed lines indicate body ratings. Pressure (MPa) lass 15 lass 3 W F8M F8 4-seats - Upper limit 15 (32 F) NOTE E seat is PTFE/PF copolymer seat Seat ratings for Gratite seated valves are identical to SME body ratings Please consult us for 4 seats SME lass 3 valves (M12 and M22) Temperature 6. DN 25-6 for Full bore DN 8 For Reduced bore 6. DN 8, 1 for Full bore DN 1,125 For Reduced bore Pressure (MPa) lass 3 lass 3 lass 15 lass Pressure (MPa) Temperature Temperature 6. DN 125, 15 for Full bore DN 15, 2 For Reduced bore 6. DN 2 for Full bore DN 25 for Reduced bore Pressure (MPa) lass 3 lass 3 lass 15 lass Pressure (MPa) Temperature Temperature 8

9 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - Imperial PRESSURE-TEMPERTURE RTINGs NPS ½, ¾ lass 3 LEGEND: Dashed lines indicate body ratings. W F8M F8 4-seats - Upper limit 32 F Pressure (psi) lass 15 NOTE E seat is PTFE/PF copolymer seat Seat ratings for Gratite seated valves are identical to SME body ratings Please consult us for 4 seats SME lass 3 valves (M12 and M22) Temperature F NPS 1-2½for Full bore NPS 3 For Reduced bore NPS 3, 4 for Full bore NPS 4, 5 For Reduced bore Pressure (psi) lass 3 7 lass 3 2 lass 15 lass 15 1 Pressure (psi) Temperature F Temperature F 1 9 NPS 5, 6 for Full bore NPS 6, 8 For Reduced bore NPS 8 for Full bore NPS 1 for Reduced bore lass lass 3 Pressure (psi) Pressure (psi) lass 15 2 lass Temperature F Temperature F 9

10 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) OPERTION FORM L-PORT (N11, N12, N21, N22 ND M11, M21),, indicate the three supply ports. Quarter turn and L-port construction allow for the following two flow patterns. (Pattern 1 and Pattern 2) Pattern 1 and Pattern 2 are standard flow directions for L-port valve. rrows indicate pressure higher than MPa. For vacuum use please inquire separately. Straight flow from to and to is not possible. (The operation rotates 9.) rossed out forms cannot be used. Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. Pattern 1 Pattern 3 Pattern 2 NOTES 1. s for 2-seats (N), Shut-off function is not available at the center port () because the seat is not installed there. Please pay attention to the direction of the flow channel when using it. In Pattern 3, the fluid pass through both flow channel to and to. 2. Please consult us for 4-seats SME lass 3 and JIS 2K valves (M12/M22) OPERTION FORM T-PORT (M11, M21),, indicate the three supply ports. T-port available for below four patterns. Pattern 1 and Pattern 2 are standard flow directions for a 4-seat (T-port) valve. rrows indicate pressure higher than MPa. For vacuum use please inquire separately. rossed out forms cannot be used. Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. NOTE Please consult us for 4-seats SME lass 3 and JIS 2K valves (M12/M22) Pattern 1 Pattern 2 Pattern 3 Pattern 4 1

11 KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) 11

12 Neither Emerson, Emerson utomation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. KTM is a mark owned by one of the companies in the Emerson utomation Solutions business unit of Emerson Electric o. Emerson utomation Solutions, Emerson and the Emerson logo are trademarks and service marks of Emerson Electric o. ll other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. ll sales are governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Emerson.com/Finalontrol

2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)

2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT) KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment