KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
|
|
|
- Laura Bryan
- 6 years ago
- Views:
Transcription
1 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment of body. low-out proof stem for safety. Sphericity tolerance of the ball is unsurpassed. Multiple layers of adjustable PTFE chevron packing rings for standard model enable excellent fugitive emission control. Positive position indication. Locking device capable. Heavy duty body construction. Machined ISO 5211 top mounting flange. Live load springs keep constant force on stem-seal packing, ensuring seal integrity and extended valve life. Dual shaft bearings for high cycle life operation. Higher v values and less cost for diverting which can be normally done with multiple installation of valves. GENERL PPLITION Diverting or mixing fluids. TEHNIL DT 2 seats (L-port) Model: N11 / N12 / N21 / N22 Full bore: DN 4-2 (NPS 11/2-8) (N11 / N12) Reduced bore: DN (NPS 5-1) (N21 / N22) Pressure rating: SME lass 15, 3 JIS 1K, 2K Temperature: (-2 F F) (Option: up to 5 /932 F) 4 seats (L and T-port) Model: M11 / M12 / M21 / M22 Full bore: DN 15-2 (NPS 1/2-8) (M11 / M12) Reduced bore: DN (NPS 5-8) (M21 / M22) Pressure rating: SME lass 15, 3 JIS 1K, 2K Temperature: -29 to 15 (-2 F - 32 F) 2 seats feature OM2 compatible, co-polymer E-seat as standard. Machined firesafe lip for metal touch to ball in case of fire. It also eliminates possibility of seat deformation. Lower operating torque, easing operation and reducing actuator cost. 4 seats feature Equipped with 4 seats so that each port can be used as an inlet. vailable with L-port and T-port for variety of applications. E-seat as standard for M11 and M Emerson. ll rights reserved. VTDS-2959-EN 16/8
2 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) 2-SETS (L-PORT) N11, N12, FULL ORE / N21, N22 REDUED ORE 25 7,8, ,12 2, 21, STEM DETIL Note: The illustration shows body construction of 3-way ball valve, Model N11 in DN 8 (NPS 3) PRTS LIST No. Description Material 1 ody F8M, F8, or W 2 ody cap F8M, F8, or W 3 all F8M or F8 4 Shaft 316 S/S or 34 S/S 5 Seat E-seat as standard (T or G seat for options) 6 Gasket R-PTFE 7 Gland bolt 193 (G) 8 8 Washer 316 S/S 9 Gland flange F8 1 Gland packing PTFE 11 Stud 193 (G) 8 or 193 (G) 7 12 Nut 194 (G) 8 or 194 (G) 2H 13 Live loading spring 34 S/S 14 nti-static spring 316L S/S 15 nti-static spring 316L S/S 16 Gland bearing PTFE 17 Thrust bearing PTFE 18 Shaft bearing R-PTFE 19 Snap ring 34 SS 2 Spring washer 34 S/S 21 olt 34 S/S 22 Washer 34 S/S 23 Stopper 34 S/S 24 Handle arbon steel 25 Indicator 34 S/S OPTIONS NE MR-1-75 Gratite seat for high temp. service (2 seats} Extension bonnet for low temp. service (2 seats) E Marking PED 97 / 23 / E Special tests - X-ray (RT) - Liquid penetrant (PT) - Positive Material Identification (PMI) 2
3 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - METRI 2-SETS (L-PORT) N11, N12, FULL ORE / N21, N22 REDUED ORE W H H1 Ød L SME LSS 15 / JIS 1K DIMENSIONS - N11 ND N21 Full bore - N11 Reduced bore - N21 DN Ød L H W H1 Ød Ødo L H W H SME LSS 3/ JIS 2K DIMENSIONS - N12 ND N22 Full bore - N12 Reduced bore - N22 DN Ød L H W H1 Ød Ødo L H W H Ødo = bore opening diameter on reduced bore valves 3
4 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - IMPERIL 2-SETS (L-PORT) N11, N12, FULL ORE / N21, N22 REDUED ORE W H H1 Ød L SME LSS 15 / JIS 1K DIMENSIONS - N11 ND N21 Full bore - N11 Reduced bore - N21 NPS Ød L H W H1 Ød Ødo L H W H1 1½ ½ SME LSS 3/ JIS 2K DIMENSIONS - N12 ND N22 Full bore - N12 Reduced bore - N22 NPS Ød L H W H1 Ød Ødo L H W H1 1½ ½ Ødo = bore opening diameter on reduced bore valves 4
5 2,21, ,14 9 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) 11 12,13 4-SETS (L ND T-PORT) M11, M12 FULL ORE / M21, M22 REDUED ORE ,21, , , H H1 STEM DETIL , , Note: The illustration shows body construction of 3-way ball valve, Model M11 in DN 8 (NPS 3) L1 PRTS LIST No. Description Material 1 ody F8M, F8, or W 2 ody cap F8M, F8, or W 3 all F8M or F8 4 Stem 316 S/S or 34 S/S 5 Seat E-seat as standard (G-seat an option) 6 Gasket PTFE 7 Thrust washer 316 S/S 8 Gland bolt 193 (G) 8 9 Gland flange F8 1 Gland packing PTFE 11 Snap ring 34 S/S 12 Stud 193 (G) 8 or 193 (G) 7 13 Nut 194 (G) 8 or 194 (G) 2H 14 Live loading spring 34 S/S 15 nti-static spring 316L S/S 16 nti-static spring 316L S/S 17 Gland bearing PTFE 18 Thrust bearing PTFE 19 Shaft bearing R-PTFE 2 Washer 34 S/S 21 Spring washer 34 S/S 22 olt 34 S/S 23 Snap ring 34 S/S 24 Stopper 34 S/S 25 Handle head arbon steel 26 Handle/pipe arbon steel 27 Indicator 34 S/S 15, , OPTIONS NE MR-1-75 E Marking PED 97 / 23 / E Special tests - X-ray (RT) - Liquid penetrant (PT) - Positive Material Identification (PMI) L Please consult us for 4 seats SME lass 3 valves (M12 and M22) 5
6 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - METRI 4 - SETS (L ND T - PORT) M11 FULL ORE / M21 REDUED ORE W H H1 Ød L1 L SME LSS 15 / JIS 1K DIMENSIONS - M11 ND M21 Full bore - M11 Reduced bore - M21 DN Ød L L1 H W H1 Ød Ødo L L1 H W H Ødo = bore opening diameter on reduced bore valves Please consult us for 4 seats SME lass 3 valves (M12 and M22) 6
7 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - IMPERIL 4 - SETS (L ND T - PORT) M11 FULL ORE / M21 REDUED ORE W H H1 Ød L1 L SME LSS 15 / JIS 1K DIMENSIONS - M11 ND M21 Full bore - M11 Reduced bore - M21 NPS Ød L L1 H W H1 Ød Ødo L L1 H W H1 ½ ¾ ½ ½ Ødo = bore opening diameter on reduced bore valves Please consult us for 4 seats SME lass 3 valves (M12 and M22) 7
8 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - METRI PRESSURE-TEMPERTURE RTINGS 6. DN 15, 2 FOR FULL ORE LEGEND: Dashed lines indicate body ratings. Pressure (MPa) lass 15 lass 3 W F8M F8 4-seats - Upper limit 15 (32 F) E seat is PTFE/PF copolymer seat Seat ratings for Gratite seated valves are identical to SME body ratings Please consult us for 4 seats SME lass 3 valves (M12 and M22) Temperature 6. DN 25-6 FOR FULL ORE DN 8 FOR REDUED ORE 6. DN 8, 1 FOR FULL ORE DN 1,125 FOR REDUED ORE Pressure (MPa) lass 3 lass 3 lass 15 lass Pressure (MPa) Temperature Temperature 6. DN 125, 15 FOR FULL ORE DN 15, 2 FOR REDUED ORE 6. DN 2 FOR FULL ORE DN 25 FOR REDUED ORE Pressure (MPa) lass 3 lass 3 lass 15 lass Pressure (MPa) Temperature Temperature 8
9 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) - IMPERIL PRESSURE-TEMPERTURE RTINGS NPS ½, ¾ lass 3 LEGEND: Dashed lines indicate body ratings. W F8M F8 4-seats - Upper limit 32 F Pressure (psi) lass 15 E seat is PTFE/PF copolymer seat Seat ratings for Gratite seated valves are identical to SME body ratings Please consult us for 4 seats SME lass 3 valves (M12 and M22) Temperature F NPS 1-2½FOR FULL ORE NPS 3 FOR REDUED ORE NPS 3, 4 FOR FULL ORE NPS 4, 5 FOR REDUED ORE Pressure (psi) lass 3 7 lass 3 2 lass 15 lass 15 1 Pressure (psi) Temperature F Temperature F 1 9 NPS 5, 6 FOR FULL ORE NPS 6, 8 FOR REDUED ORE NPS 8 FOR FULL ORE NPS 1 FOR REDUED ORE lass lass 3 Pressure (psi) Pressure (psi) lass 15 2 lass Temperature F Temperature F 9
10 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) OPERTION FORM L-PORT (N11, N12, N21, N22 ND M11, M21),, indicate the three supply ports. Quarter turn and L-port construction allow for the following two flow patterns. (Pattern 1 and Pattern 2) Pattern 1 and Pattern 2 are standard flow directions for L-port valve. rrows indicate pressure higher than MPa. For vacuum use please inquire separately. Straight flow from to and to is not possible. (The operation rotates 9.) rossed out forms cannot be used. Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. PTTERN 1 PTTERN 3 PTTERN 2 S 1. s for 2-seats (N), Shut-off function is not available at the center port () because the seat is not installed there. Please pay attention to the direction of the flow channel when using it. In Pattern 3, the fluid pass through both flow channel to and to. 2. Please consult us for 4-seats SME lass 3 and JIS 2K valves (M12/M22) OPERTION FORM T-PORT (M11, M21),, indicate the three supply ports. T-port available for below four patterns. Pattern 1 and Pattern 2 are standard flow directions for a 4-seat (T-port) valve. rrows indicate pressure higher than MPa. For vacuum use please inquire separately. rossed out forms cannot be used. Leakage occurs on the flow channel side if the pressure of arrow is higher than the flow channel side. Please consult us for 4-seats SME lass 3 and JIS 2K valves (M12/M22) PTTERN 1 PTTERN 2 PTTERN 3 PTTERN 4 1
11 KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) SELETION GUIDE Example N11 L 32 IE 15 RF 25 GG Valve code SME JIS Description N K F, DN 4-2 (NPS 1½ - 8) N12 3 2K F, DN 4-2 (NPS 1½ - 8) N K R, DN (NPS 5-1) N22 3 2K R, DN (NPS 5-1) M K F, DN 15-3 (NPS ½ - 8) M12 3 2K F, DN 15-2 (NPS ½ - 8) M K R, DN (NPS 5-8) M22 3 2K R, DN 15-2 (NPS 5-8) Sub code Description lank Soft seat G Gratite seat Special feature Description L L-port T T-port (For 4-seats only) ody code SME JIS 31 F8 SS13 32 F8M SS14 62 W SPH2 Trim code Soft seat SME all JIS all Seat Packing Stem 1E F8 [1] / F8M [2] SS13 [1] / SS14 [2] PTFE/PF opolymer PTFE 34 [1] / 316 [2] 5E [1] F8M SS14 PTFE/PF opolymer PTFE 316 Gratite seat F8 [1] / F8M [2] SS13 [1] / SS14 [2] Graphite 329J1 Flange code SME Description JIS Description 15 SME lass 15 J1 JIS 1K 3 SME lass 3 J2 JIS 2K onnection code ode Description RF Raised face (125 to 25 RH) Size code ode DN NPS ½ ¾ 1 1½ 2 2½ Option code ode Description lank No additional option GG Graphite packing and gasket S F = Full bore R = Reduced bore 1. ody code 31 and For body code 32 only Please consult us for 4 seats SME lass 3 valves (M12 and M22) 11
12 217 Emerson. ll rights reserved. 12
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
A single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES
A new generation of ball valves with fugitive emission control and ISO mounting pad FEATURES GENERAL APPLICATIONS Pulp and paper, reactive monomers, oil and gas production, steam, hot gases, toxic and
KTM V-PORT CONTROL BALL VALVE FULL BORE AND REDUCED BORE
A rugged, long-life V-port control ball valve with excellent flow characteristics for various fluids including slurries and fibers FEATURES GENERAL APPLICATION Steam, liquids, gas or critical services
KTM. Enhanced, proven design offers both control and block valve functions
KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)
KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES
OMNI-II, a new generation of ball valves with OW-E fugitive emission certification, cavity relieving seats and ease of automation FEATURES GENERA APPICATIONS Chemical, petrochemical, pulp and paper, reactive
Order code information
3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* CRYOGENIC CONFIGURATION
VNESS SERIES 30,000 TRIPE OFFSET VVES* RYOGENI ONFIGURTION virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations
Vanessa Series 30,000 Triple Offset Valves* Cryogenic Configuration
* ryogenic onfiguration virtually maintenance-free valve with tightness, operability and torque demand unaffected by cryogenic conditions and severe temperature fluctuations Features General applications
FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
FLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
Model SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
FLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
General applications Chemical plant, oil refinery, power plant, steam, Dowtherm, fused alkali, fuel oil and gas
KTM Gratite Seat i-temp Ball Valves KTM KTM s Gratite seat ball valve not only operates across an impressive range of temperatures, from -29 C to 500 C, it also boasts outstanding performance and a reliability,
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
Keystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
Fisher D and DA Control Valves
D and D Valves Product Bulletin Fisher D and D Control Valves Fisher D and D single port, high pressure valves are widely used in oil and gas production industries. These valves are especially useful for
J Flow Controls Model Numbering
4665 Interstate Dr Cincinnati, OH 45246 Phone 513-731-2900 Fax 513-731-6939 3500 Series Valve Instruction and Maintenance Manual Caution: Prior to performing any repairs or maintenance on the valve assembly,
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
KF Series FA Ball Valves
KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
Engineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
International Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
3L/T-2P/Q33 Series 3 Way Ball Valves
3L/T-P/Q33 Series 3 Way Ball Valves A multi-port valve that will lower overall costs by allowing the replacement of two or three conventional straight-line valves, eliminating excess fittings and simplifying
B1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
SEGMENT VALVE, RA WAFER AND RB FLANGED
SEGMENT LE, R WFER ND RB FLNGED The segment valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series segment valve is a good general control
Forged Steel Bolted & Welded Bonnet Gate Valves Sizes: 1/4 thru 3 Pressure Class: 150 thru 4500
Forged Steel olted & Welded onnet Gate Valves s: 1/4 thru 3 Pressure lass: 150 thru 4500 Manufactured by Newmans Rev: 052109 13 Typical Newco Forged Steel olted & Welded onnet Gate Valve Expanded View
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
KEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
KEYSTONE SERIES GR RESILIENT SETED BUTTERFLY VLVES GRW/GRL heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry
Model B. Thermostatic Valves FEATURES APPLICATIONS FLOW RATES OF USGPM TAMPER-PROOF TEMPERATURE SETTINGS OF 55 F F
Model Thermostatic Valves FETURES FLOW RTES OF 68-1200 USGPM TMPER-PROOF TEMPERTURE SETTINGS OF 55 F - 240 F OMPLETELY SELF-ONTINED POSITIVE 3-WY VLVE TION VILLE IN ST IRON, DUTILE IRON, RONZE, STEEL,
Durco. Microfinish Ball Valve. The Best Standard Stem Seal In The Industry. Bulletin VM-60e (A4)
P R E S E N T I N G T H E N E W urco Microfinish all Valve F O R H E M I A L S E R V I E S The est Standard Stem Seal In The Industry ulletin VM-6e (A4) (VM-6e) Microfinish all Valve 8/2/2 7:35 AM Page
Two-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
GTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300
GTW ONTROL VLVE PPLITION DT Process control systems for food, pulp and paper, chemical, petrochemical & other industries HV systems Feed water and fuel system controls in boiler rooms Packaged systems
International Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
GVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
Manifolds WAY MANIFOLDS. Instrument valves & manifolds
Manifolds WY MNIFOLDS Instrument valves & manifolds OVERVIEW STV offers a broad line of 1,2,3,4 and 5-way instrument manifolds, all available in a wide range of materials and fully compatible with the
ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF ND FIRESFE VLVES FIGURE 1075 The Jamesbury brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 1075 are manual assemblies consisting of the Jamesbury Fire-Tite
NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(2)GB 11.02 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
NELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(1)GB 08.12 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4
FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Body Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
Y -PATTERN GLOBE VALVES
Y -PTTERN GLOBE VLVES Low operation torque design. Rising and rotating stem for the most PI 602 design simplicity. Flanged valves are provided with fl anges integral with the body forgings. Outside Screw
CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
Worcester 53/54 Series. Reduced Bore Flanged Ball Valves to DIN 3202
Worcester 3/4 Series Reduced Bore Flanged Ball Valves to DIN 3202 General Description Since its introduction to industry, the Series 3/4 ball valve has become a major force in the world of fluid control.
Electro Controls. Valves / Linkages WattsIndustries.co.uk
Electro Controls Valves / Linkages - 07 WattsIndustries.co.uk valves / linkages Section MOUNTING INSTRUCTIONS FOR LINKGES EE.. M K / EE..ES / EE..RD EE..MK UTO MNUL UTO MNUL UTO MNUL. Push the valve spindle
Triple Offset Valves
Triple Offset Valves FLOWSEAL MS Value Statement For the harsh conditions of critical process applications, steam isolation, high cycle frequency, and temperature extremes, the Flowseal MS triple-offset
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
D I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV
TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
2-WAY AND 3-WAY MOTORIZED VALVES FOR STEAM, VACUUM AND HOT WATER APPLICATIONS
R O R P O R T I O N -WY ND 3-WY MOTORIZED VLVES FOR STEM, VUUM ND HOT WTER PPLITIONS VLVE ND TUTOR FETURES Valve Sizes range from ½ inch to 8 inches -Way and 3-Way Single Seated and -Way Double Seated
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
Two-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
Cast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
HIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
Ball Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
NELES RA SERIES V-PORT SEGMENT VALVE
NELES R SERIES V-PORT SEGMENT VLVE Metso's Neles V-port valve in the R-series is primarily intended as a control valve, but it can also be used for shut-off service. The R-series V-port segment valve is
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
Double Offset Butterfly Valve
General Applications Airport Refuelling Hydrocarbon Processing HVA hemical Processing Purified Gas Steam & Vacuum Services Potable Water Variations of Sealing PTFE - Teflon with glass Metal/Metal Fire
K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS
A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections.