3/2 ^ % Features. Construction. Electrical

Transcription

1 4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing applications which eliminates the need to modify existing designs xplosion-proof solenoid options Solenoid options with factory sealed leads reduce installation time TX/Ix and UL/S approved for hazardous locations orrosion Resistant - 316L valve material makes it ideal for offshore and harsh environments Rated for air, inert gas and sweet dry natural gas ^ % onstruction ody Spring Seals ore and Plugnut Valve Parts in ontact with luids 316L Ni-o lloy KM, LT NR (Solenoid Only) 430 Single Solenoid Normally losed Normally Open SPIL SRVI Spool 316L lectrical oil Options Insulation lass Wattage Spare oil Part Number Intrinsically Safe H 0.48 W Ultra 0.55 W W ompact 1.8 W W W W IMPORTNT: Supervisory & leakage current above the drop out current listed will cause improper operation. onsult your local SO sales office for additional assistance. escription Ultra ompact Wattage 0.55 W 1.4 W 1.8 W 1.8 W Voltage () Min. Pull In (m) rop Out (m) oil Resistance at 68 (20 ) (Ohms) 12V V V V , V V V V V V ual Solenoid Normally losed Latching Palm utton Nominal mbient Temp. Ranges Ultra, and Intrinsically Safe: -9 to 149 (-23 to 65 ) : -9 to 140 (-23 to 60 ) ompact : -9 to 203 (-23 to 95 ) : -9 to 125 (-23 to 52 ) : -9 to 131 (-23 to 55 ) : -9 to 194 (-23 to 90 ) Refer to ngineering Section for details. Solenoid nclosures : xplosionproof and Watertight, Types 4X, 6, and 6P. Refer to ngineering Section for fluid and temperature compatibility. pprovals Solenoid Only: UL and S ertified for lass I iv. 1 Locations TX, Ix: x d mb TX, Ix: x d Refer to ngineering Section for details. 1

2 3/2 SRIS Important These solenoid valves are intended for use on clean dry air, inert gas, or sweet dry natural gas filtered to 40 micron or better. The dew point of the media should be at least 10 (18 ) below the minimum temperature to which any portion of the air, inert gas or sweet dry natural gas system could be exposed to prevent freezing. If lubricated air is used, the lubricants must be compatible with KM and LT NR elastomers. Instrument air in compliance with NSI/IS exceeds the above requirements and is, therefore, an acceptable media for these valves. How to order H SPIL SRVI unction 01 Single Solenoid/Spring Return 06 ual Solenoid 23 Latching Palm utton with Solenoid Operated ir Latch Pilot lectrical onnection Type H1 1/2" onduit with 18 ' Leads Harsh nviroment lass I iv 1 onstruction / Pilot 0 Normally losed / xternally Piloted 1 Normally Open / xternally Piloted 7 etent / xternally Piloted 8 Normally losed / Internally Piloted 9 Normally Open / Internally Piloted etent / Internally Piloted Voltages 0 120/60, 110/50 lass 1 24/ lass 3 12/ lass H1 24/ lass H Solenoid Type / Orientation 1 ompact (1.8W) 2 (1.4W) 3 (1.8 W) 4 Ultra (0.55W) 5 Intrinsically Safe (0.48W) 6 (10.1W) 7 (11.6W) ompact (1.8W) / 90 egree Solenoid (1.4W) / 90 egree Solenoid (1.8W) / 90 egree Solenoid Ultra (0.55W) / 90 egree Solenoid Intrinsically Safe (0.48W) / 90 egree Solenoid (10.1W) / 90 egree Solenoid H (11.6W) / 90 egree Solenoid Specifications nglish units (Metric) Pipe Size (in) Pilot Orifice Size (in) low v (Kv) Operating Pressure ifferential psi (bar) xternal Pilot Pressure psi (bar) ase atalog Number Solenoid Orientation Min. Max. Min. Max. unction Normally Open / Internally Piloted 1/4 1/ (0.95) 18 (1.2) 150 (10) N/ N/ H191_1 Single Solenoid/Spring Return Straight 1 1/4 1/ (0.95) 18 (1.2) 150 (10) N/ N/ H191_1 Single Solenoid/Spring Return 90 Solenoid 2 Normally Open / xternally Piloted 1/4 1/ (0.95) (13.8) 36 (2.5) 150 (10) H111_1 Single Solenoid/Spring Return Straight 1 1/4 1/ (0.95) (13.8) 36 (2.5) 150 (10) H111_1 Single Solenoid/Spring Return 90 Solenoid 2 Normally losed / Internally Piloted 1/4 1/ (1.38) 18 (1.2) 150 (10) N/ N/ H181_1 Single Solenoid/Spring Return Straight 3 1/4 1/ (1.38) 18 (1.2) 150 (10) N/ N/ H181_1 Single Solenoid/Spring Return 90 Solenoid 4 1/4 1/ (1.38) 40 (2.8) 150 (10) N/ N/ H181_1 Latching Palm utton with Solenoid Operated ir Latch Pilot Straight 5 1/4 1/ (1.38) 40 (2.8) 150 (10) N/ N/ H181_1 Latching Palm utton with Solenoid Operated ir Latch Pilot 90 Solenoid 6 Normally losed / xternally Piloted 1/4 1/ (1.38) (13.8) 36 (2.5) 150 (10) H101_1 Single Solenoid/Spring Return Straight 3 1/4 1/ (1.38) (13.8) 36 (2.5) 150 (10) H101_1 Single Solenoid/Spring Return 90 Solenoid 4 1/4 1/ (1.38) (13.8) 40 (2.8) 150 (10) H101_1 Latching Palm utton with Solenoid Operated ir Latch Pilot Straight 5 1/4 1/ (1.38) (13.8) 40 (2.8) 150 (10) H101_1 Latching Palm utton with Solenoid Operated ir Latch Pilot 90 Solenoid 6 etent Internally Piloted 1/4 1/ (1.38) 15 (1.0) 150 (10) N/ N/ H11_1 ual Solenoid Straight 7 1/4 1/ (1.38) 15 (1.0) 150 (10) N/ N/ H11_1 ual Solenoid 90 Solenoid 8 etent xternally Piloted 1/4 1/ (1.38) (13.8) 15 (1.0) 150 (10) H171_1 ual Solenoid Straight 7 1/4 1/ (1.38) (13.8) 15 (1.0) 150 (10) H171_1 ual Solenoid 90 Solenoid 8 ase atalog Numbers are listed as 24 V versions. or 12 V, change last digit from a "1" to a "3" Maximum Operating Pressure for Intrinsically Safe and Ultra Versions is 130 psi (9 bar) and 200 psi (13.8 bar)for Maximum Pilot Pressure for Intrinsically Safe and Ultra Versions is 130 psi (9 bar) and 200 psi (13.8 bar)for onst. Ref. 2

3 4 3/2 SRIS 364 imensions: inches (mm) onst. Ref. 1 & MOUNTIN HOL imension omapact / /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT /4" PIP THR XTRNL ONLY 3.02 [77].75 [19] SPIL SRVI onst. Ref. 2 & MOUNTIN HOL 1/4" PIP THR omapact / imension /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT [42] XTRNL ONLY 3.29 [84] 3

4 3/2 SRIS imensions: inches (mm) onst. Ref. 3 n.27 q & MOUNTIN HOL imension ompact / /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT /4" PIP THR 3.02 [77] XTRNL ONLY SPIL SRVI.75 [19] onst. Ref. 4 1/4" PIP THR & MOUNTIN HOL ompact / imension /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT [42] XTRNL ONLY 3.29 [84] 4

5 4 3/2 SRIS 364 imensions: inches (mm) onst. Ref. 5 Ø 3.48 [88] & MOUNTIN HOL 1/4" PIP THR L imension ompact / /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT H L M XTRNL ONLY H M Ø1.81 [46] SPIL SRVI onst. Ref. 6 Ø 3.48 [88] & MOUNTIN HOL 1/4" PIP THR ompact / imension /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT M [54] M Ø1.81 [46] XTRNL ONLY 1.82 [46] 5

6 3/2 SRIS imensions: inches (mm) onst. Ref. 7 & MOUNTIN HOL 1/4" PIP THR ompact / imension /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT H L [99] SPIL SRVI L OR XTRNL ONLY OR XTRNL ONLY H onst. Ref. 8 & MOUNTIN HOL 1/4" PIP THR 2 PLS 2 PLS ompact / imension /2" NPT 1/2" NPT 1/2" NPT 1/2" NPT [53] 3.76 [95] 1.67 [42] 2 PLS 2 PLS 2 PLS OR XTRNL ONLY 2 PLS 1 [45] 4 [113] 6