Diagnostic, Orifice, Bleed Adapters and Specialty Fittings

Size: px

Start display at page:

Download "Diagnostic, Orifice, Bleed Adapters and Specialty Fittings"

Betty Craig
6 years ago
Views:

1 iagnostic, Orifice, leed dapters and Specialty ittings The itting uthority

2 4300 atalog iagnostic, Orifice, leed dapters iagnostic Tees O6G5TP ORS Swivel / ORS / SE-OR XX6G5TP 37 Swivel / 37 lare / SE-OR GM3 EO Tube / EO Tube / EM-3 iagnostic Tip iagnostic Tee Port dapters and Plugs 5OG SE / NPT Gauge OG SE dj / NPT P5ON ex ead Plug N5 P5ON ollow ex Plug N5 irect onnect iagnostic Tips N5 P33 P / SE-OR EM3 SE / OR N6 irect onnect Sampling Tips G6 NPT Gauge / ORS Swivel N6 G9 PS34 P luid Sampling / SE-OR N6* GTX NPT Gauge / 37 lare NPT / SE-OR Gauge dapters G0 G6X NPT Gauge / 37 Swivel G5 SE-OR Gauge / ORS SP Gauge dapters G65 SE-OR Gauge / ORS Swivel MVE SPP Gauge / EO Swivel N6* N6* GO NPT Gauge / ORS MV SPP Gauge / EO G4MXSMO SPP Gauge / 37 lare G4MOSMO SPP Gauge / ORS Swivel Tube dapters PTX 37 Swivel / P iagnostic Tip PT ORS Swivel / P iagnostic Tip N7 PTU SE lareless / P iagnostic Tip N7 N7 VK3 EO Swivel / iagnostic Tip ulkhead iagnostic ouplings N7 P345 / P355 / P365 P / 37 lare N0* P346 / P366 / P386 P / ORS N0* MV /4 NPT Series iagnostic Tip / Gauge N0* WGTX NPT Gauge / 37 lare Orifice ittings N0 XX7 37 Seat / 37 lare with Orifice O6 ORS Swivel with Orifice / ORS N9* ORS / Port leed dapters N9* PNO leed Screw / ORS N9* N9 N leed Screw / ORS Swivel N P5ON leed Screw / SE-OR P leed Screw / NPT N Parker Triple Thread itting N 009 NPT / PTT 30 lare N N N N3 * Standard products available through Parker s Quick oupling ivision. N Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters Introduction Parker offers a line of specialty-type adapters specifically designed for diagnostic, fixed flow control and bleeding applications.

These products have been developed to work in conjunction with electronic diagnostic products available from Parker s Quick oupling ivision and other mechanical pressure and temperature sensing

3 4300 atalog iagnostic, Orifice, leed dapters Introduction Parker offers a line of specialty-type adapters specifically designed for diagnostic, fixed flow control and bleeding applications. iagnostic products consist of a line of in-line diagnostic tees, pressure gauge connectors and diagnostic tips. These products have been developed to work in conjunction with electronic diagnostic products available from Parker s Quick oupling ivision and other mechanical pressure and temperature sensing equipment. Some products can be used for fluid sampling and bleeding purposes as well. Parker offers a standard and custom line of fixed flow control orifice fittings. These products are available as standard in two Parker product series ORS and 37 flare, and as a custom option in virtually any orifice size, fitting series, size, material and configuration. Parker s bleed adapters are designed to remove entrapped air from a hydraulic system. common problem in hydraulic systems is trapped air and the subsequent spillage of hydraulic oil while removing components to bleed air from lines under pressure. Parker s bleed adapters provide a quick, clean, and simple method of bleeding entrapped air from hydraulic systems. astly, Parker offers a limited line of PTT (Parker Triple Thread) 30 flare adapters for transportation markets. ig. N Parker offers a full line of diagnostic, orifice, bleed adapters and specialty fittings iagnostic ittings and dapters In-ine iagnostic Tees eatures esigned around the two most common hydraulic tube/hose interfaces: ORS (Seal-ok) and 37 flare (JI / Triple-ok) (see ) vailable in 6 sizes and end configurations as standard ORS and 37 flare swivel feature offers unlimited positioning without displacing port adapter (see ) Uses elastomeric sealing: SE 4 (7/6-0 UN) port as universal diagnostic port per SE J96- / ISO 96 (see ) Enlarged and lengthened body hex ensures that diagnostic port offers full thread engagement and pressure capability (see ) daptable to Parker s line of diagnostic and fluid sampling tips including: EM-3, P and PS, as well as various direct connecting electronic/mechanical pressure gauges esigned to complement Parker s line of Senso- ontrol electronic diagnostic equipment Increased pressure ratings and assembly torque resistance for diagnostic applications dditional 0 sizes available in 4 flareless/metric (EO/EO-) tube union style tee 4 flareless/metric rated by size and series as shown in accompanying tables ustom diagnostic tees available upon request. & 37 lare ig. N Parker s XX6G5TP (top) and O6G5TP (bottom) in-line diagnostic tees ORS N3 Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters pplications In-line pressure and temperature measurements In-line oil sampling to evaluate hydraulic contamination, caused by problems with filtration or

Permanent or temporary OEM and MRO diagnostic applications: Where traditional in-port diagnostic tips cannot be located or easily accessed Where OEM diagnostic tips have not been installed

4 4300 atalog iagnostic, Orifice, leed dapters pplications In-line pressure and temperature measurements In-line oil sampling to evaluate hydraulic contamination, caused by problems with filtration or internal components In-field diagnostics without removal of port adapters. Simply remove hose swivel and insert in-line tee. Permanent or temporary OEM and MRO diagnostic applications: Where traditional in-port diagnostic tips cannot be located or easily accessed Where OEM diagnostic tips have not been installed Non-traditional diagnostic locations (portable) Where port threads are not compatible with standard diagnostic tips To eliminate reducer bushings and couplings typically required to neck down from larger size connections to smaller connections; e.g. reductions required for a gauge, diagnostic tip, bleed adapter, or tube/hose connection. System Installation s with most Parker adapter products, iagnostic tees are rated with both a dynamic and static working pressure rating. static pressure rating can often be used for in-field or temporary diagnostic applications so long as the maximum static pressure rating is not exceeded and the application does not exceed 30,000 operating cycles. ssembly Instructions The body of the diagnostic tee can be used repeatedly for 0-0 remakes at full rated pressure and assembly torque. See Tables N and N3 for recommended swivel nut assembly torques. Specifications Specifications Industry Standards 37 lare/ors Material Machined odies and Swivel Nuts old ormed Swivel Nuts Temperature Range, Non-Elastomeric Seals Temperature Range, Elastomeric Seals ody Sizes Maximum Rated Working SE Products: 37 lare and ORS Parker Triple-ok and Seal-ok 37 lare (JI): SE J54/ISO ORS: SE J453/ISO Steel, old rawn barstock STM 08, Type 4 igh Strength Nuts STM 08, Type 37 Steel, STM 576 Type -00/008 Steel: -40 to +500 ORS luorocarbon O-Rings: -5 to +400 ORS: SE -4 through lare: SE -4 through -4 Table N Material Specifications of Parker s iagnostic Tees ig. N3 Illustration showing the versatility of Parker s diagnostic tee product line 4 lareless Metric Parker EO and EO- N/ Steel: -40 to +500 ORS Nitrile O-Rings: -30 to +50 Nitrile EO-: -30 to + luorocarbon EO-: -5 to +400 See accompanying Tables IN 353/ISO Steel, Per IN 3859 ight: 6- through 4- eavy: 6 through 38 See accompanying Tables ssembly Torque Part (+0%-0) Number in.-lb. ft.-lb. 4-4 XX6G5TP XX6G5TP XX6G5TP XX6G5TP XX6G5TP XX6G5TP XX6G5TP XX6G5TP Note: ssembly values are for dry, unlubricated swivel nut connections Table N ssembly Torques for iagnostic Tees ssembly Torque Part (+0%-0) Number in.-lb. ft.-lb G5TP 6-4 6G5TP G5TP G5TP 7 6 6G5TP G5TP G5TP 3 0 6G5TP G5TP G5TP Table N3 ssembly Torques for iagnostic Tees N4 Parker annifin orporation

5 4300 atalog iagnostic, Orifice, leed dapters O6G5TP Gauge Port Tee ORS / ORS Swivel / SE-OR 3 XX6G5TP Gauge Port Tee 37 lare / 37 Swivel / SE-OR 3 ITTING EN 3 UN/UN (x,000 PSI) ynamic 4-4 O6GP5TP /4 /4 7/6-0 -/ O6GP5TP 3/8 3/8 7/6-0 -/ O6GP5TP / / 7/6-0 -/ O6GP5TP 5/8 5/8 7/6-0 -/ O6GP5TP 3/4 3/4 7/6-0 -/ O6GP5TP 7/6-0 -/ O6GP5TP /4 /4 7/6-0 -3/ O6GP5TP / / 7/6-0 -/ ITTING EN 3 UN/UN (x,000 PSI) ynamic 4-4 O6GP5TP /4 /4 7/6-0 -/ O6GP5TP 3/8 3/8 7/6-0 -/ O6GP5TP / / 7/6-0 -/ O6GP5TP 5/8 5/8 7/6-0 -/ O6GP5TP 3/4 3/4 7/6-0 -/ O6GP5TP 7/6-0 -/ O6GP5TP /4 /4 7/6-0 -3/ O6GP5TP / / 7/6-0 -/ Note: luorocarbon O-rings are available upon request. GM3 iagnostic Tip EO Tube / EO Tube / M6 x.0 Integrated Tip S S3 Tube O.. I ITTING O.. I S S3 (x,000 PSI) 3 ynamic 3 GM3/ GM3/ GM3/ GM3/ GM3/ GM3/ GM3/ GM3/ GM3/ GM3/ GM3/06S GM3/08S GM3/0S GM3/S GM3/4S GM3/6S GM3/0S GM3/5S GM3/30S GM3/38S To specify EO-, add Z between tube size and series. Example: GM3/8Z3 N5 Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters iagnostic Tee Port dapters and Test Points dapters are available to enable traditional NPT pressure gauges to be connected to the 7/6-0 UN port of the

6 4300 atalog iagnostic, Orifice, leed dapters iagnostic Tee Port dapters and Test Points dapters are available to enable traditional NPT pressure gauges to be connected to the 7/6-0 UN port of the diagnostic tees. 5OG adapters provide a simple conversion, while the OG adapters provide the same simple conversion with infinite positioning due to the male OR adjustable stud. irect connecting test points products, available through Parker s Quick oupling ivision, provide reliable and safe testing opportunities. These traditional pressure and temperature test points (P and EM) are the most common diagnostic test interfaces used in hydraulic applications. The PS is used for fluid sampling applications. onsult Parker s Quick oupling ivision for more information on these and many other diagnostic test point options available through Parker. NPT Gauge onversion dapters ig. N4 iagnostic tees shown with P Series nipple installed in 7/6-0 UN (SE-OR) port 5OG OG ITTING EN UN/UN- NPT (x,000 PSI) ynamic 4-/8 5OG 7/6-0 /8-7 9/ /4 5OG 7/6-0 /4-8 3/ /8 OG 7/6-0 /8-7 5/8.4 4-/4 OG 7/6-0 /4-8 3/4.57 Parker s Quick oupling ivision Test Point ouplings eatures of Parker Quick oupling ivision iagnostic Test Points P Series ITTING OR PORT TRE UN/UN- EM3 Series P33* 7/ EM3/7/6-0 UN-* 7/ PS34* 7/ PERORMNE RTINGS onsult Q atalog 3800 * product of Parker s Quick oupling ivision. ontact Q at (763) or at PS Series P: lush face valving, minimizing fluid loss Industry standard interface Push-to-connect EM3: M6 x thread-to-connect onnects under pressure Industry standard interface PS: or fluid sampling only N6 Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters SPP iagnostic Gauge dapters Parker s SPP direct-connect pressure gauge adapters are available in the most common tube/hose connections ORS, 37 lare (JI)

7 4300 atalog iagnostic, Orifice, leed dapters SPP iagnostic Gauge dapters Parker s SPP direct-connect pressure gauge adapters are available in the most common tube/hose connections ORS, 37 lare (JI) and 4 Metric lareless (IN 353). European pressure gauges often utilize SPP threads on the pressure gauges (manometers). Sealing is achieved at the bottom of the port with a sealing washer as shown in the illustration on the right. SPP pressure gauge port sealing with use of sealing ring SPP Gauge dapters G4MXSMO (Type ) G4MOSMO (Type ) MVE (Type ) MV (Type ) ORS 37 lare EO / EO- 4 lareless ig. N5 SPP pressure gauge connections EO / EO- 4 lareless Swivel EN OY NUT (x,000 PSI) ITTING EX EX ynamic TYPE SPP S S 4-4G4MXSMO /4 / G4MXSMO 3/8 / G4MXSMO / / G4MOSMO /4 / G4MOSMO 3/8 / G4MOSMO / / ynamic SPP 3 3 MVE06R3 6 / MVE08R3 8 / MVE0R3 0 / MVE06SR3 6 / MVE08SR3 8 / MVE0SR3 0 / MVESR3 / MVE06SR/43 6 / MVE08SR/43 8 / MVE0SR/43 0 / MVESR/43 / MV04R3 4 / MV06R3 6 / MV08R3 8 / MV0R3 0 / MVR3 / MV06SR3 6 / MV08SR3 8 / MV0SR3 0 / MVSR3 / Note: MV supplied as standard with PR +M nut (EO assembled) * SPP Gauge onnection requires seal. /4" replacement seal P/N: M580. ** SPP Gauge onnection requires seal. /4" replacement seal P/N: KI/43X, /" replacement seal P/N: KI/3X. N7 Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters NPT and SE-OR iagnostic Gauge dapters Parker s NPT and SE-OR direct-connect pressure gauge adapters are available in the most common North merican

8 4300 atalog iagnostic, Orifice, leed dapters NPT and SE-OR iagnostic Gauge dapters Parker s NPT and SE-OR direct-connect pressure gauge adapters are available in the most common North merican tube/hose connections ORS and 37 lare (JI). North merican pressure gauge manufacturers offer gauges primarily with NPT and some with SE-OR port stud options. These 37 flare and ORS connectors are designed to attach pressure gauges to hose swivel ends or directly to run / branch tees for in-line diagnostic applications as shown on the right. GO GTX G6 Traditional or electronic / digital pressure gauge NPT / SE Gauge dapters GO (Type ) S G6 (Type ) G5 (Type ) R5OO Run Tee ydraulic ose G65 (Type ) S GTX (Type E) S G6X (Type ) ig. N6 Typical applications for NPT pressure gauge adapters. Illustrations show direct hose connections and Run Tee connection. ITTING EN OY EX S SWIVE NUT EX (x,000 PSI) ynamic TYPE NPT 4-4 GO /4 / / GO 3/8 / / GO / / / G6 /4 / /4 / G6 3/8 / /8 3/ G6 / / /8 5/ UN/UN 4 G5O /4 7/ / G5O 3/8 7/ / G5O / 7/ / G65 /4 7/ /6 / G65 3/8 7/ /4 3/ G65 / 7/ /8 5/ NPT GTX E /8 / / GTX E 3/6 / / GTX E /4 / / GTX E /4 / / GTX E 3/8 / / GTX E 3/8 / / GTX E / / / G6X /4 /4-8 9/6 3/4 9/ G6X /4 /8-7 9/6 9/6 9/ G6X 3/8 /4-8 /6 3/4 / Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters iagnostic Tube / ose dapters Parker s diagnostic tube/hose adapters offer direct connection to the most common tube and hose interfaces ORS, 37 lare (JI)

Several bulkhead connections are also available as well for diagnostic panels, a common industrial and mobile equipment practice.

9 4300 atalog iagnostic, Orifice, leed dapters iagnostic Tube / ose dapters Parker s diagnostic tube/hose adapters offer direct connection to the most common tube and hose interfaces ORS, 37 lare (JI) and 4 Metric lareless (IN 353). The swivel connections are commonly used on tees where periodic pressure and temperature checks are required. Several bulkhead connections are also available as well for diagnostic panels, a common industrial and mobile equipment practice. Several of these product series are offered by Parker s Quick oupling ivision as designated in the accompanying tables. ulkhead pplication ulkhead ocknut ORS or 37 Swivel ose onnection ulkhead iagnostic ouplings P Nipple* Triple-ok ulkhead Nipple P / ulkhead 37 lare Q STEE OVER ENGT E EXPOSE ENGT EX P P P Note: dd -6 to part number to include dust cap; e.g., P ontact factory for seal option. E P Nipple* Seal-ok ulkhead Nipple P / ulkhead ORS E Tube Swivel pplications In Port Parker Male Run Tee 8 R5OX 37 Swivel ose onnection Q STEE OVER ENGT E EXPOSE ENGT EX P P P MV /4 NPT* M6 x.0 iagnostic Tip / /4 NPT Gauge In-ine P38TX Parker T Series EO or EO- itting Q ** Includes dust cap. PORT TRE EX PORT TRE OVER ENGT MV/4NPT-M3 /4-8 NPT 0.75 M6 x.0. MV/4NPT-M3-KM** /4-8 NPT 0.75 M6 x.0. WGTX emale ulkhead onnector NPT / 37 lare ex VK3 Series ITTING EN NPT EX OVER ENGT 4 WGTX /4 /8-7 / WGTX /4 /4-8 3/4. 6 WGTX 3/8 /4-8 3/6.06 * product of Parker s Quick oupling ivision. ontact Q for performance data at (763) or at quickcouplings. N9 Parker annifin orporation

10 4300 atalog iagnostic, Orifice, leed dapters Tube Swivel iagnostic ouplings PTX* Triple-ok Tube Swivel Nipple P iagnostic Tip / 37 Swivel PT* Seal-ok Tube Swivel Nipple P iagnostic Tip / ORS Swivel Q STEE OVER ENGT EXPOSE ENGT P34TX P36TX P38TX P3TX Note: Tube end nipples are designed to meet the performance standards of the tube or hose fitting connection, which may or may not meet SE J50 Standards. P34TX P36TX Q STEE OVER ENGT EXPOSE ENGT P34T P36T P38T P30T Note: Tube end nipples are designed to meet the performance standards of the tube or hose fitting connection, which may or may not meet SE J50 Standards. P34T P36T PTU* erulok Tube Swivel Nipple P iagnostic Tip / SE lareless OVER ENGT EXPOSE ENGT Q STEE P38TU VK3 M6 x.0 iagnostic Tip / EO Swivel SW SW G Type SW SW Type G ITTING STEE O.. RE. (x,000 PSI) G SW SW ynamic TYPE Metric 3 3 VK3/063 6 M x VK3/083 8 M4 x VK3/03 0 M6 x VK3/3 M8 x VK3/53 5 M x VK3/83 8 M6 x VK3/3 M30 x VK3/83 8 M36 x VK3/ M45 x VK3/43 4 M5 x VK3/06S3 6 M4 x VK3/08S3 8 M6 x VK3/0S3 0 M8 x VK3/S3 M0 x VK3/4S3 4 M x VK3/6S3 6 M4 x VK3/0S3 0 M30 x VK3/5S3 5 M36 x VK3/30S3 30 M4 x VK3/38S3 38 M5 x N0 * product of Parker s Quick oupling ivision. ontact Q for performance data at (763) or at Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters Orifice ittings These compact and cost effective orifice adapters allow OEMs to pre-set, at the factory, a specified orifice in specific hydraulic tube or

11 4300 atalog iagnostic, Orifice, leed dapters Orifice ittings These compact and cost effective orifice adapters allow OEMs to pre-set, at the factory, a specified orifice in specific hydraulic tube or hose lines. ostly flow control valves can be eliminated or minimized in a system by selecting the proper orifice sizes at the factory. OEMs can also be assured that end users are not adjusting the factory established flow and speed characteristics of the hydraulic system. Orifice Orifice eatures: 37 flare and ORS configurations as standard Three standard body sizes available: /4" 3/8", and /" vailable in commonly accepted pre-set orifice sizes as shown on accompanying tables esigned for permanent or temporary installation an be installed in-line into hydraulic system by simply connecting between hose swivel and adapter Orifice size is permanently stamped on body dditional differentiation can be provided as a custom option (special color plating, hex notch, etc.) an eliminate costly flow control valves Standard construction consists of zinc yellow dichromate plated steel ustom orifice fittings available upon request in multitudes of sizes, materials, configurations, and orifice sizes pplications: ixed rotation speed for hydraulic motors ixed speed on cylinder extend or retract irect Port Orifice ittings: vailable as a custom product, Parker also offers a line of orifice adapters that will replace a traditional port adapter. XX7 Orifice In-ine Orifice onnector 37 lare / emale 37 Seat ITTING EN & O6 Orifice In-ine Orifice onnector ORS Swivel / ORS Orifice Orifice ynamic 4 XX7.05 Orifice /4 9/ XX7.03 Orifice /4 9/ XX7.047 Orifice /4 9/ XX7.06 Orifice /4 9/ XX7.078 Orifice /4 9/ XX7.094 Orifice /4 9/ XX7.05 Orifice 3/8 / XX7.03 Orifice 3/8 / XX7.047 Orifice 3/8 / XX7.06 Orifice 3/8 / XX7.078 Orifice 3/8 / XX7.094 Orifice 3/8 / XX7.05 Orifice / 7/ XX7.03 Orifice / 7/ XX7.047 Orifice / 7/ XX7.06 Orifice / 7/ XX7.078 Orifice / 7/ XX7.094 Orifice / 7/ ITTING EN & EX EX ORIIE ORIIE (x,000 PSI) (x,000 PSI) ynamic 4 O6.05 Orifice /4 5/ O6.03 Orifice /4 5/ O6.047 Orifice /4 5/ O6.06 Orifice /4 5/ O6.078 Orifice /4 5/ O6.094 Orifice /4 5/ O6.05 Orifice 3/8 3/ O6.03 Orifice 3/8 3/ O6.047 Orifice 3/8 3/ O6.06 Orifice 3/8 3/ O6.078 Orifice 3/8 3/ O6.094 Orifice 3/8 3/ O6.05 Orifice / 7/ O6.03 Orifice / 7/ O6.047 Orifice / 7/ O6.06 Orifice / 7/ O6.078 Orifice / 7/ O6.094 Orifice / 7/ N Parker annifin orporation

12 4300 atalog iagnostic, Orifice, leed dapters leed dapters Entrapped air is a major contributor to inefficient operation. Typically, bleeding hydraulic systems is done by cracking a connection to bleed off the entrapped air. This practice is not recommended, especially in larger size fittings where high forces can exist. Parker s bleed adapters are especially beneficial in applications where elastomeric seals (O-rings) can be extruded and/or damaged during bleeding such as with Parker s Seal-ok fittings. Parker s bleed adapters are designed specifically for installation directly to ORS (O-Ring ace Seal) type fittings or into SE/NPT manifolds and valves where bleeding is often required. eatures leed hydraulic systems without cracking hydraulic connections Uses standard automotive bleed screw design leed screw is permanently crimped into body housing, for blowout prevention In-port options with SE and NPT male studs Tube/hose connection options to male and female ORS Zinc Yellow hromate plated steel construction leeding ydraulic Systems with Parker leed dapters Whenever possible, the bleed adapter should be mounted at the highest point within the hydraulic system. The trapped air can be relieved while the system is running at low pressure. To bleed, loosen the bleed screw / turn counterclockwise. fter the hydraulic fluid begins to run freely from the bleed screw, the bleed screw should be re-tightened. leed Screw Tightening Torque: in.-lbs. Warning: When bleeding hydraulic fluid, operate the system below 500 psi. To avoid injury, ensure that all persons are clear of the path of discharge. nother recommended practice is to attach a section of hose over the bleed screw/adapter to direct oil away from the area and to reduce oil spillage. ) ) ) Seal-ok leed dapter (Sizes -8 thru -4) or use with Seal-ok ittings ) ORS leed dapters Pipe Thread leed dapter /4 NPT or use with Pipe Thread Ports Ø.30 (ref) Ø.30 (Ref.) Ref. Notes: ) Standard automotive bleedscrew. ) ocking crimp prevents screw from being completely unthreaded. ) ) 3/8 ex ITTING PNO EN 3/8 ex ORS Tube Nut N ORS Tube Nut sold separately (x,000 PSI) ynamic 4 PNO /4 - / PNO 3/8-3/ PNO / - 7/ PNO 5/8 - / PNO 3/4 - / PNO - / PNO /4-3/ PNO / - / N /.63 5/ N 5/8.63 / N 3/4.63 3/ N.63 5/ N /4.63 7/ N /.63 / Port leed dapters Ø.30 (Ref.) ITTING (Ref.) (Ref.) 3/8 ex Ø.30 (Ref.) Straight Thread leed dapter Size 4 (7/6-0 UN) or use with SE Straight Thread Ports (Ref.) (Ref.) 3/8 ex 4 P5ON /4 P EN OY EX RE. RE. (x,000 PSI) ynamic 4 P5ON 7/6-0 UN/UN- /6 / /4 P /4-8 NPT /6 / N Parker annifin orporation

4300 atalog iagnostic, Orifice, leed dapters Parker Triple Thread (PTT) dapters 009 dapter 3 Series (PTT) ose Swivel Parker Triple Thread (PTT) adapters are considered the original three-piece

13 4300 atalog iagnostic, Orifice, leed dapters Parker Triple Thread (PTT) dapters 009 dapter 3 Series (PTT) ose Swivel Parker Triple Thread (PTT) adapters are considered the original three-piece hydraulic flared fittings. The connection was pioneered by urther Parker, the founder of Parker annifin orporation, as an improved fitting design over traditional two-piece flared fittings. Its use was widespread as a primary hydraulic connection for various aircraft, industrial and mobile applications. The PTT 30 flare three-piece design paved the progress towards the standardized 37 connection (through the Joint Industrial ouncil JI) and later to current standardization initiatives of SE and ISO. Its popularity has been diminished by the more common and standardized 37 flare connection, but even today certain transportation customers utilize PTT hose adapters for OEM and MRO applications. 009 Parker Triple Thread itting NPT / PTT ITTING EN NPT EX TER SSY ( 5/6-4) 3/4-4 3/ ( 5/6-4) - / 3/ /4 ( 5/8-4) /4- / 3/ / ( 7/8-4) /- / ynamic (x,000 PSI) S SS eatures: 30 flare connection ose adapter connection only (no sleeve for tube connections) Metal-to-metal seal SE 4 steel with zinc yellow dichromate Parker plating and friction control system our 009 PTT sizes available as standard ustom sizes, configurations, and materials available upon request pplications: iesel engine manufacturers Transportation air conditioning lines Mates with Parker ose Products ivision 3 swivel end configuration in 0 and Series fittings. N3 Parker annifin orporation

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5

Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5 atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product