Your Global Source for Today s Most Popular Solenoid Valves

Size: px
Start display at page:

Download "Your Global Source for Today s Most Popular Solenoid Valves"

Transcription

1 lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves

2 lcon Solenoid Valves, a division of International Motion ontrol (IM), has over fifty years of experience in designing and manufacturing solenoid valves. Our solenoid valves are used throughout the world and have a reputation for quality and dependability. lcon valves are found in applications where liquid or gas flow must be reliably and automatically controlled. Our product line offers a full range of valves for general purpose and special-purpose duty: ir Water Gases Fuel Hot Water Steam ryogenics ggressive Media The range of valves shown in the catalogue largely covers the standard products supplied on a regular basis. ustomer Service and Request for Quotation (RFQ) lcon s business is built on supplying modified standard product and 100% special solenoid valves to our ever-changing market place. We welcome the opportunity to meet your individual needs. To request a quote, please use our on-line RFQ form or the one located within this catalogue. Ongoing developments will result in new products being added to the lcon valve range. For all of your customer support requirements, or to request a catalogue, please contact us: Tel.: +44 (0) Fax:+44 (0)

3 lcon Valve Range Table of ontents Products and Services Request For Quotation (RFQ) Selecting and Ordering Solenoid Valves Way General Purpose Solenoid Valves 21 Series 1/8-3/8 Normally losed Series 3/8-2 Normally losed P Series 3/8-2 Normally losed HL Series 3/8-8 Normally losed Manual Reset Series 1/8-3/8 Normally Open N Series 3/8-2 Normally Open PN Series 3/8-2 Normally Open HP Series 1/4-1/2 Normally losed Way General Purpose Solenoid Valves 31 Series 1/8-1/4 Normally losed Series 1/8-1/4 Normally Open Series 1/8-1/4 Universal Solenoid Valves for ctuator ontrol 67 Series 1/4-1/2 3 Way irect cting Series 1/4-1/2 3 Way and 5 Way Pilot Operated Spool Namur 5/2 Universal Valve 3 Way onvertible Way Gas and Fuel Solenoid Valves G Series 1/4-2 Normally losed HW Series 1-1/4-6 Normally losed FHL Series 3/8-10 Normally losed Manual Reset Way irect cting Motorised and Pneumatic Valves HN/HNO Series Solenoid Valves 1/2-3 Normally losed/normally Open JN/JNO Series Solenoid Valves 1/2-3 Normally losed/normally Open Way Special Purpose Solenoid Valves Hot Water Series Solenoid Valves 1/8-2 Normally losed Steam Series Solenoid Valves 1/8-2 Normally losed Series - ryogenic Solenoid Valves 1/4-2 Normally losed Solenoid Valves for Hazardous reas ppendix Technical Information orrosion Reference Guide Viscosity Guide onversion Tables Warranty and Warnings Notes Internet: Phone: +44 (0) Fax: +44 (0)

4 Request For Quotation ddress: ddress: ompany: Name: ddress: ity: State: Zip: Phone: Fax: Request For Quotation Fax ack Form omplete this form and fax to: lcon United Kingdom +44 (0) Please call us at: +44 (0) regarding your specific application or to request a catalogue. Line Fluid: ir Water Hot Water Steam Natural Gas Oil Other Gas or Liquid Line Pressure: (a) Inlet: (b) ownstream: (a-b) Maximum O.P.. Minimum O.P.. bar bar bar bar Line Fluid Temperature: Minimum: º Maximum: º mbient Temperature: Minimum: º Maximum: º Valve Type: 2-Way 3-Way 5-Way Namur Mode of Operation: Normally Open Normally losed Universal Pipe Size: SP Orifice Size: Maximum llowable Pressure rop: bar Flow: Kv GPM SFM ody Material: rass Stainless Steel Other Seal Material: unan PTFE Viton EPM Other Operating Voltage: Voltages (60Hz/50Hz) Voltages 24 V 12 V Other 110/120 V 24 V 220/230 V 48 V 110V Power onsumption: Watts Electrical onnection: IN Other Enclosure: IP65 (Glass Reinforced Nylon) IP67 EExd (Hazardous uty) Other Make/atalogue number Number: lcon atalogue Number: Make/Model of urrent Valve now in service: Quantity Required: Single Shipment nnually Target Price ( ): 1 Internet: Phone: +44 (0) Fax: +44 (0)

5 Using this atalogue Selection and Ordering Information lcon atalogue Use This catalogue is designed for ease-of use by anyone needing to learn more about lcon solenoid valves. Whether you are a System esigner or Purchaser, this resource has been developed with you in mind. Selection Process We offer an extensive range of solenoid valves for Industrial and OEM markets. There are numerous configurations of body material, seal packages, and electrical connections available for an lcon solenoid valve. How to Order lcon solenoid valves within this catalogue are conveniently organized by valve Series. Refer to Table of ontents and page tabs. Each valve Series has unique Features, Options and Technical Specifications. To determine the lcon solenoid valve required to meet your needs, fundamental information is necessary: 1. Media being passed through the valve 2. Flow Rate 3. Working Pressure Range 4. Media Temperature We recommend providing as much information as possible when ordering an lcon Solenoid Valve, assuring that the right valve is selected and delivered. Please specify the following information: ORERING INFORMTION Example atalogue Number...4 Required Valve ody Material...Stainless Steel Required Seal Package...EPM Required Voltage...12 Volt Electrical onnection...in Maximum System Pressure...40 R Operating Pressure ifferential Range (OP)...10 R Media / Fluid...rain Water Fluid Temperature Range to +50 mbient Temperature Range to +50 orrosive Properties, if applicable...ph = 7.2 (Refer to our orrosion Reference Guide, page 46) ll of the above information is used to create your lcon solenoid valve. For Features, Options and Technical Specifications that are not catalogued please contact us using our Request for Quotation (RFQ) on the facing page or on our website at Internet: Phone: +44 (0) Fax: +44 (0)

6 2 Way General Purpose Solenoid Valves Features ompact Valve esign Wide Range of vailable Orifices Zero Pressure Rated hoice of Valve ody Material and Seals 21 Series 1/8-3/8 Normally losed Technical Specification 21 Series Standard ody Material: Optional ody Material: Standard Seal Material: Optional Seal Materials: rass Stainless Steel Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 PTFE -200 to +180 Note: Temperature ranges indicate approved media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 1/ / / / / / / / / / / / P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details. 3 Internet: Phone: +44 (0) Fax: +44 (0)

7 2 Way General Purpose Solenoid Valves 21 Series 1/8-3/8 Normally losed 21 Series Note: Solenoid oil may be rotated to any angle. imensional ata Pipe Size 1/ / / How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. 21 Series Water Flow (GPM) Pressure rop (ar) 1 Kv= 0.05 Kv= 0.10 Kv= 0.21 Kv= 0.30 Kv= 0.46 Kv= 0.60 Kv= 0.67 Kv= Pressure rop drop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

8 Features Robust Valve esign iaphragm Operation Fully Ported Orifices for high Kv hoice of Valve ody Material and Seals Sizes 3/8-3/4 dvantica approved to S EN for household use. 2 Way General Purpose Solenoid Valves Series 3/8-2 Normally losed Series Technical Specification Standard ody Material: rass 3/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: Stainless Steel* Standard Seal Material: Optional Seal Materials: Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 Note: Temperature ranges indicate approved media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 3/ / / / * 1-1/ T* 1-1/ * 1-1/ T* * T* P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details *For larger valves in Stainless Steel, 8 through 10T, consult factory for price, availability and minimum quantity 5 Internet: Phone: +44 (0) Fax: +44 (0)

9 2 Way General Purpose Solenoid Valves Series 3/8-2 Normally losed Series imensional ata Pipe Size 3/8-3/ / Note: Solenoid oil may be rotated to any angle. How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. alcon Series Series Water Flow (GPM) Pressure rop (ar) Kv= 3.0 Kv= 4.2 Kv= 4.7 Kv= 7.1 Kv= 23.0 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

10 2 Way General Purpose Solenoid Valves Features Heavy uty Valve esign Piston Operation Wide Temperature Range apabilities hoice of Valve ody Material and Seals P Series 3/8-2 Normally losed P Series Technical Specification Standard ody Material: rass 3/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: Stainless Steel Standard Seal Material: Optional Seal Materials: Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 PTFE -200 to +180 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 3/ P3 1/ P4 3/ P P7 1-1/ P8 1-1/ P P10 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 7 Internet: Phone: +44 (0) Fax: +44 (0)

11 2 Way General Purpose Solenoid Valves P Series 3/8-2 Normally losed P Series imensional ata Pipe Size 3/8-1/ * 122 3/ * /4-1-1/ Note: Solenoid oil may be rotated to any angle. *imension Including in Plug How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. alcon P P Series Series Water Flow (GPM) Pressure rop (ar) Kv= 3.0 Kv= 4.2 Kv= 5.4 Kv= 12.5 Kv= 18.0 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

12 Features Heavy uty Valve esign Manual Lever Reset Operation No voltage Release Safety Feature version fitted with Internal Rectifier Manual Reset Solenoid Valves HL Series 3/8-8 Normally losed HL Series Technical Specification Standard ody Material: Standard Seal Material: ronze Nitrile (unan) -10º to +80º EPM -50 to +120 VITON -20 to +150 Metal -200 to +180 Note: Temperature ranges indicate approved media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v Standard Protection lass: IP65 (IN 43650) Electrical onnection: in Onnector (PG9) oil Insulation: pproved mbient Temperature: Media: lass H suitable for continuous duty -10º to +50º Oil, Liquids, Suitable for steam when fitted with metal seals Selection Guide Refer to flow data on next page Pipe Orifice P. Max Power Weight atalogue Kv OP (R) Size mm (R) Watts lbs. Number 3/ HL3 1/ HL4 3/ HL HL7 1-1/ HL8 1-1/ HL HL10 2-1/ HL HL HL HL HL17 Note: Solenoid must be fitted uppermost in horizontal pipework P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 9 Internet: Phone: +44 (0) Fax: +44 (0)

13 Manual Reset Solenoid Valves HL Series 3/8-8 Normally losed HL Series imensional ata Pipe Size 3/8-1/ inc plug 184 3/ inc plug /4-1-1/ inc plug inc plug / inc plug inc plug How to use Flow hart based on Kv Note: Solenoid cover and reset assembly may be rotated to any angle. 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. HL Series Water Flow (GPM) Note: onsult factory for flow figures for valves above 2 1 / Pressure rop (ar) Kv= 2.0 Kv= 3.0 Kv= 8.0 Kv= 9.5 Kv= 23.0 Kv= 47.0 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

14 2 Way General Purpose Solenoid Valves Features Zero Pressure Rated Ideal for In-Line System Service and Repair hoice of Valve ody Material and Seals 22 Series 1/8-3/8 Normally Open 22 Series Technical Specification Standard ody Material: Optional ody Material: Standard Seal Material: Optional Seal Materials: rass Stainless Steel Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 PTFE -200 to +180 Note: Temperature Ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 1/ / / / / / P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 11 Internet: Phone: +44 (0) Fax: +44 (0)

15 2 Way General Purpose Solenoid Valves 22 Series 1/8-3/8 Normally Open 22 Series Note: Solenoid oil may be rotated to any angle. imensional ata Pipe Size 1/ / / How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. 22 Series Water Flow (Gal/Min) Pressure rop (ar) 1 Kv= 0.1 Kv= 0.3 Kv= 0.6 Kv= Pressure rop drop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

16 2 Way General Purpose Solenoid Valves N Series 3/8-2 Normally Open Features Robust Valve esign iaphragm Operation Fully Ported Orifices for high Kv hoice of Valve ody Material and Seals Sizes 3/8-3/4 dvantica approved to S EN for household use. N Series Technical Specification Standard ody Material: rass 3/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: *Stainless Steel Standard Seal Material: Optional Seal Materials: Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 3/ N3 1/ N4 3/ N N7 1-1/ N8* 1-1/ N9* N10* P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details *For larger valves in Stainless Steel, N8 through 10, consult factory for price, availability and minimum quantity 13 Internet: Phone: +44 (0) Fax: +44 (0)

17 2 Way General Purpose Solenoid Valves N Series 3/8-2 Normally Open N Series imensional ata Pipe Size 3/8-3/ / Note: Solenoid oil may be rotated to any angle. How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. alcon N N Series Series Water Flow (GPM) Pressure rop (ar) Kv= 3.0 Kv= 4.2 Kv= 4.7 Kv= 7.1 Kv= 23.2 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

18 2 Way General Purpose Solenoid Valves Features Heavy uty Valve esign Piston Operation Wide Temperature Range apabilities hoice of Valve ody Material and Seals PN Series 3/8-2 Normally Open PN Series Technical Specification Standard ody Material: rass 3/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: Stainless Steel Standard Seal Material: Optional Seal Materials: Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 PTFE -200 to +180 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 3/ PN3 1/ PN4 3/ PN PN7 1-1/ PN8 1-1/ PN PN10 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 15 Internet: Phone: +44 (0) Fax: +44 (0)

19 2 Way General Purpose Solenoid Valves PN Series 3/8-2 Normally Open PN Series imensional ata Pipe Size 3/8-1/ * 131 3/ * /4-1-1/ Note: Solenoid oil may be rotated to any angle. *imension Including in Plug How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. alcon PN PN Series Series Water Flow (GPM) Pressure rop (ar) Kv= 3.0 Kv= 4.2 Kv= 5.4 Kv= 7.1 Kv= 18.0 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

20 2 Way General Purpose Solenoid Valves Features Ideal for High Pressure pplications ompact Valve esign Piston Operated hoice of Valve ody Material and Seals HP Series 1/4-1/2 Normally losed HP Series Technical Specification Standard ody Material: Optional ody Material: Standard Seal Material: rass Stainless Steel PTFE -200 to +180 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: oil Insulation: pproved mbient Temperature: 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) IP65 lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil Watts Kg. Number 1/ HP2 3/ HP3 1/ HP4 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 17 Internet: Phone: +44 (0) Fax: +44 (0)

21 2 Way General Purpose Solenoid Valves HP Series 1/4-1/2 Normally losed HP Series imensional ata Pipe Size 1/ / / Note: Solenoid oil may be rotated to any angle. Note: Inlet and outlet are at 90 degrees. How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. alcon HP HP Series Series Water Flow (GPM) Pressure rop (ar) 1 Kv= Pressure rop drop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

22 3 Way General Purpose Solenoid Valves Features Ideal for Mixing, iverting and Venting pplications ompact Valve esign Wide Range of vailable Orifices Zero Pressure Rated hoice of Valve ody Material and Seals 31 Series 1/8-1/4 Normally losed 32 Series 1/8-1/4 Normally Open 33 Series 1/8-1/4 Universal 31, 32, 33 Series Technical Specification Standard ody Material: Optional ody Material: Standard Seal Material: Optional Seal Materials: rass Stainless Steel Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (IN onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Selection Guide Refer to flow chart on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 1/ / / / / / / / / / / / / / / / / / P.Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate. atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential. Otherwise this value represents the minimum pressure differential required to operate the valve. atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details. 19 Internet: Phone: +44 (0) Fax: +44 (0)

23 3 Way General Purpose Solenoid Valves 31 Series 1/8-1/4 Normally losed 32 Series 1/8-1/4 Normally Open 33 Series 1/8-1/4 Universal 31, 32, 33 Series Note: Solenoid oil may be rotated to any angle. imensional ata Pipe Size 1/ / How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. 31, 32, 33 Series Kv= 0.11 Kv= 0.21 Kv= 0.30 rop Internet: Phone: +44 (0) Fax: +44 (0)

24 Features Stainless Steel onstruction as Standard esigned for ctuator ontrol Larger Porting for High Kv Zero Pressure Rated Normally closed, Normally open, Mixing or iverting Solenoid Valves for ctuator ontrol 67 Series 1/4-1/2 3 Way Single Solenoid Technical Specification Standard ody Material: Stainless Steel 67 Series Standard Seal Material: Optional Seal Materials: Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v Standard Electrical onnection: IP67 EExd M20 x 1.5 (Optional with in onnector) IN (PG9) Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: Optional mbient Temperature: Optional Operation: IP67 (EExd IIT6) TEX pproved IP65 (IN onnector) lass H suitable for continuous duty -20º to +40º (T6) -50º to +70º (T4) Manual override, Manual reset, Manual latch ontact factory for details. Selection Guide Refer to flow data on next page 3/2 Series Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 1/ Z53* 3/ Z53* 1/ Z53* 1/ Z53 3/ Z53 1/ Z53 *Note: Normally losed Option Only. P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 21 Internet: Phone: +44 (0) Fax: +44 (0)

25 Solenoid Valves for ctuator ontrol 67 Series 1/4-1/2 3 Way Single Solenoid Series imensional ata 2 Holes M8x1.25 Pipe Size 1/ / / Note: Solenoid housing may be rotated to any angle. How to use Flow hart based on Kv 1. Select the required flow, M 3 /hr. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. 67 Series irfflow (Ft 3 /H) Pressure rop (ar) Kv= Pressure rop (PSI) ir Fflow (M 3 /H) 0.01 Internet: Phone: +44 (0) Fax: +44 (0)

26 Features Stainless Steel onstruction as Standard esigned for ctuator ontrol Single Solenoid or ual Solenoid onfiguration Low Power onsumption 3 Way position or 5 Way 2 Position Options NPT onnections as Standard Technical Specification 5/2 and 3/2 Pilot Operated Spool Valves 67 Series 1/4-1/2 3 Way and 5 Way Pilot Operated Standard ody Material: Stainless Steel 316L 67 Series Standard Seal Material: Optional Seal Materials: VITON -20 to +150 Nitrile (unan) -10 to +80 EPM -50 to +120 VITON -20 to +150 Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v Standard Electrical onnection: IP67 EExd M20 x 1.5 (Optional with in onnector) IN (PG9) Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: Optional mbient Temperature: IP67 (EExd II T6) TEX pproved IP65 (IN onnector-non-hazardous reas) lass H suitable for continuous duty -50º to +40º (T6) EExd -50º to +70º (T4) EExd Selection Guide Refer to flow data on next page Pipe P. Max Power ual or atalogue Function Kv OP (R) Size (R) Watts Single Number 1/4 3/ Single 5731Z53 1/2 3/ Single 5731Z53 1/4 5/ Single 4531Z53 1/2 5/ Single 4531Z53 1/4 5/ ual 4831Z53 1/2 5/ ual 4831Z53 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 23 Internet: Phone: +44 (0) Fax: +44 (0)

27 5/2 and 3/2 Pilot Operated Spool Valves 67 Series 1/4-1/2 3 Way and 5 Way Pilot Operated 3 WY 5 WY ÿ78 ø HOLES 2 Holes M8x HOLES Holes ÿ8.5 ø8.5 able LE ENTRY entry x 1,5 M20 x 1,5 Earth ERTH Point POINT (SINGLE SOLENOI) (Single Solenoid) (UL SOLENOI) (ual Solenoid) 67 Series Note: For additional dimensional information contact factory imensional ata: 3 way Pipe Size 1/ / imensional ata: 5 way Pipe Size Type 1/ Single Solenoid 1/ Single Solenoid 1/ ual Solenoid 1/ ual Solenoid How to use Flow hart based on Kv 1. Select the required flow, M 3 /hr. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. 67 Series 3 Way and 5 Way Pilot ir Flow (Ft 3 /Hr) Pressure rop (ar) Kv= 15 Kv= 53 1 Pressure rop (PSI) ir Flow (M 3 /Hr) Internet: Phone: +44 (0) Fax: +44 (0)

28 Features Namur Interface for irect ctuator Mounting esigned for ctuator ontrol Pilot Operated Spool Valve Technology hoice of Valve ody Material Integral Manual Override Solenoid Valves for ctuator ontrol Namur 5/2 Universal Series 3 Way onvertible Technical Specification Standard ody Material: Optional ody Material: Standard Seal Material: nodized luminum Stainless Steel Nitrile (unan) -10 to +80 Namur Series Note: Temperature ranges indicate media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v Standard Electrical onnection: 10mm in onnector IN (Optional with IP67 EExd M20x1.5 onduit Hub) Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: Media: IP65 IP67 (EExd) (EExia, EExm) lass F suitable for continuous duty -10º to +50º ir, ompressed, Filtered and Lubricated Selection Guide Refer to flow data on next page Pipe OP (R) Power ody Weight atalogue Kv Size oil oil Watts Material Kg. Number 1/ luminum 0.5 NMUR Std. 1/ luminum 1.5 NMUR EExd 1/ luminum 0.5 NMUR EExia Pipe OP (R) Power ody Weight atalogue Kv Size oil oil Watts Material Kg. Number 1/ Stainless Steel 0.5 NMUR Std. SS 1/ Stainless Steel 1.5 NMUR EExd SS 1/ Stainless Steel 0.5 NMUR EExia SS P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential. Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 25 Internet: Phone: +44 (0) Fax: +44 (0)

29 Solenoid Valves for ctuator ontrol Namur 5/2 Universal Series 3 Way onvertible Namur Series Note: For EExd and EExia options consult factory for dimensional details. How to use Flow hart based on Kv 1. Select the required flow, M 3 /hr. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. lcon Universal Series Namur - 5/2 Series ir Flow flow (Ft 3 /H) Pressure rop (ar) Kv= Pressure rop (PSI) Flow (M 3 /H) 0.01 Internet: Phone: +44 (0) Fax: +44 (0)

30 2 Way Gas and Fuel Solenoid Valves G Series 1/4-2 Normally losed Features Lightweight luminum onstruction Ideal for Low Pressure Natural Gas, Town Gas, Propane and utane pproved Safety Shut-off Valve EN161 Fully Ported Orifices for High Flow at Minimal Pressure rop Zero Pressure Rated Technical Specification Standard ody Material: luminum Standard Seal Material: Nitrile (unan) -10 to +80 G Series Note: Temperature ranges indicate approved media temperatures for seal material. oil Voltage (50Hz): 24v, 120v, 230v oil Voltage 12v, 24v Standard Protection lass: IP65 Electrical onnection: in onnector (IN 43650) (PG9) oil Insulation: lass H suitable for continuous duty pproved mbient Temperature: 0º to +60º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (mr) Power Weight atalogue Size mm Kv (R) oil Watts Kg. Number 1/ G2 3/ G3 1/ G4 3/ G G7 1-1/ G8 1-1/ G G10 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details Note: Gas Flow is typically rated at p= 2.5 mbar 27 Internet: Phone: +44 (0) Fax: +44 (0)

31 2 Way Gas and Fuel Solenoid Valves G Series 1/4-2 Normally losed G Series imensional ata Pipe Size 1/ / / / / / Optional Pressure Test Points Note: Solenoid oil may be rotated to any angle. How to use Flow hart using Kv. 1. Select the required flow, M 3 /hr. 3. Using at. No., (refer to the Selection Guide on the previous page), 2. Note the corresponding at No. and pressure drop. choose the desired valve by pipe size and atalogue Number. G Series Natural Gas Flow (Ft 3 /Hr) Kv = Kv = 5.4 Pressure rop (mar) 1 Kv = 3.6 Kv = 12.9 Kv = 13.6 Kv = Pressure rop drop ("WG) Flow (M 3 /Hr) (Natural Gas) Internet: Phone: +44 (0) Fax: +44 (0)

32 Features Suitable for main gas safety shut off Ideal for automatic burners, fire protection systems and low pressure natural gas pproved Safety Shut-Off Valve EN161 Zero Pressure Rated Optional volt free closed/open position indication for MS systems Pressure test points standard Visual indication of valve opening standard. Technical Specification Standard ody Material: luminum up to 3, ast Iron above 3 2 Way Gas and Fuel Solenoid Valves HW Series 1-1/4-6 Normally losed Standard Seal Material: Nitrile (unan) -10 to +80 Note: Temperature ranges indicate approved media temperatures for seal material. HW Series oil Voltage (50/60 Hz): Standard Protection lass: Electrical onnection: pproved mbient Temperature: losing Time: 110v, 230v IP50 1/2 onduit 0º to +60º Less than 1 second Selection Guide Refer to flow data on next page Pipe Orifice P. Max Hold Weight atalogue Flow m 3 /hr Size mm (PSI) OP (mbar) V Kg. Number 1-1/ HW8 1-1/ HW HW HW10F* 2-1/ HW11 2-1/ HW11F* HW HW12F* HW13* HW15* *Note: (F) enotes flanged connection PN6/16 ll others screwed to S21 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential. Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details *Valve designed to operate with larger OP. Valve configuration includes VITON Seals (-20 to +150 ) as standard. *Gas Flow is typically rated at p= 2.5 mbar 29 Internet: Phone: +44 (0) Fax: +44 (0)

33 2 Way Gas and Fuel Solenoid Valves HW Series 1-1/4-6 Normally losed HW Series imensional ata Pipe Size 1-1/ / / /2 Flanged Flanged How to use Flow hart based on Kv 1. Select the required flow, M 3 /hr. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. HW Series Natural Gas Flow (Ft 3 /Hr) Pressure rop (mar) 1 Kv= 46.5 Kv= 82.0 Kv= Kv= Kv= Kv= Pressure rop ("WG) Flow (M 3 /Hr) (Natural Gas) Internet: Phone: +44 (0) Fax: +44 (0)

34 2 Way Gas and Fuel Solenoid Valves FHL Series 3/8-10 Normally losed Features Heavy uty Valve esign For use with Fire Protection Systems Manual Lever Reset Operation No voltage Release Safety Feature version fitted with Internal Rectifier esigned for Gas, Oil and Liquids Suitable for 1st, 2nd and 3rd Gas Families Technical Specification Standard ody Material: Standard Seal Material: rass Nitrile (unan) -10º to +80º Note: Temperature ranges indicate approved media temperatures for seal material. FHL Series oil Voltage : oil Voltage (50/60 Hz): 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v Standard Protection lass: IP65 (IN 43650) Electrical onnection: in Onnector (PG9) oil Insulation: pproved mbient Temperature: Media: lass H suitable for continuous duty -10º to +50º Gas, Oil, Liquids Selection Guide Refer to flow data on next page Pipe Orifice P. Max Power Weight atalogue Kv OP (R) Size mm (R) Watts lbs. Number 3/ FHL3 1/ FHL4 3/ FHL FHL7 1-1/ FHL8 1-1/ FHL FHL10 2-1/ FHL FHL FHL FHL FHL FHL19 Note: Solenoid must be fitted uppermost in horizontal pipework P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 31 Internet: Phone: +44 (0) Fax: +44 (0)

35 2 Way Gas and Fuel Solenoid Valves FHL Series 3/8-10 Normally losed FHL Series imensional ata Pipe Size 3/8-1/ inc plug 184 3/ inc plug /4-1-1/ inc plug inc plug / inc plug inc plug How to use Flow hart based on Kv Note: Solenoid cover and reset assembly may be rotated to any angle. 1. Select the required flow, M 3 /hr. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. FHL Series ir Flow (Ft 3 /Hr) Note: onsult factory for flow figures for valves above 2 1 / Note: Refer to page 10 for liquid flow. Pressure rop (ar) Kv= 2.0 Kv= 3.0 Kv= 8.0 Kv= 9.5 Kv= 23.0 Kv= 47.0 Kv= Pressure rop (PSI) ir Flow (M 3 /Hr) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

36 Features 2 Way irect cting Motorised and Pneumatic Valves HN (Normally losed)/hno (Normally Open) Series 1/2-3 High Flow General Purpose Valve Optional Volt Free losed/open Position Indication for MS Systems Slow Opening / Quick lose Visual indication of Valve Opening as Standard Technical Specification Standard ody Material: Standard Seal Material: rass Nitrile (unan) -10º to +80º EPM -50 to +120 VITON -20 to +150 Note: Temperature ranges indicate approved media temperatures for seal material. oil Voltage (50/60 Hz): 110v, 230v HN/HNO Series Standard Protection lass: Electrical onnection: pproved mbient Temperature: IP50 1/2 onduit -10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil Watts lbs. Number 1/ HN4 3/ HN HN7 1-1/ HN8 1-1/ HN HN10 2-1/ HN HN12 1/ HNO4 3/ HNO HNO7 1-1/ HNO8 1-1/ HNO HNO10 2-1/ HNO HNO12 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 33 Internet: Phone: +44 (0) Fax: +44 (0)

37 2 Way irect cting Motorised and Pneumatic Valves HN (Normally losed)/hno (Normally Open) Series 1/ Optional PI Switch irection of flow HN/HNO Series imensional ata Pipe Size 1/ /4 1-1/ How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. HN/HNO Series Water Flow (GPM) Pressure rop (ar) Kv= 3.1 Kv= 6.2 Kv= 8.8 Kv= 19.8 Kv= 30.9 Kv= 51.5 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

38 2 Way irect cting Motorised and Pneumatic Valves JN ( Normally losed)/jno (Normally Open) Series 1/2-3 Features High Flow General Purpose Valve Robust Valve esign Fully ported for High Kv Suitable for Heavy oil up to 3500 Sec Redwood Technical Specification Standard ody Material: ronze Standard Seal Material: Nitrile (unan) -10º to +80º EPM -50 to +120 VITON -20 to +150 Metal -200 to +180 Note: Temperature ranges indicate approved media temperatures for seal material, see Selection Guide below. JN/JNO Series Operated y ir Standard Protection lass: pproved mbient Temperature: Valves are operated by 0.7 to 7.0 ar air supply into Pneumatic operater with 3 way Pilot Valve IP54-10º to +50º Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Weight atalogue Kv Size mm (R) oil lbs. Number 1/ JN4 3/ JN JN7 1-1/ JN8 1-1/ JN JN10 2-1/ JN JN12 1/ JNO4 3/ JNO JNO7 1-1/ JNO8 1-1/ JNO JNO10 2-1/ JNO JNO12 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 35 Internet: Phone: +44 (0) Fax: +44 (0)

39 2 Way irect cting Motorised and Pneumatic Valves JN ( Normally losed)/jno (Normally Open) Series 1/2-3 JN/JNO Series imensional ata Pipe Size (N) (NO) 1/ /4-11/ / How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. JN/JNO Series Water Flow (GPM) Pressure rop (ar) Kv= 3.1 Kv= 6.2 Kv= 8.8 Kv= 19.8 Kv= 30.9 Kv= 51.5 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

40 Features Wide Range of vailable Product Specifically esigned for Hot Water Temperature up to +120º hoice of rass or Stainless Steel Valve ody Technical Specification Standard ody Material: rass 1/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: Stainless Steel* 2 Way Special Purpose Solenoid Valves Hot Water Series 1/8-2 Normally losed Standard Seal Material: EPM -50 to +120 Valve Sizes 1/8-1/4 Note: Temperature ranges indicate approved media temperatures for seal material. oil Voltage : oil Voltage (50/60 Hz): 12v, 24v, 110v 24v, 120v, 220v Special Purpose - Hot Water Standard Protection lass: NEM 4 (in onnector) Electrical onnection: 9mm in onnector (IN 43650) oil Insulation: lass H suitable for continuous duty pproved mbient Temperature: -10 to +50 Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP ar Power Weight atalogue Kv Size mm ar oil oil Watts kg Number 1/ / / / / / / / / E 1/ E 3/ E E 1-1/ N/ E* 1-1/ TE* 1-1/ N/ E* 1-1/ TE* N/ E* TE* Valve Sizes 3/8-2 * For larger valves in Stainless Steel, 8E through 10TE, consult factory for price, availability and minimum quantity P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 37 Internet: Phone: +44 (0) Fax: +44 (0)

41 2 Way Special Purpose Solenoid Valves Hot Water Series 1/8-2 Normally losed Valve Sizes 1/8-1/4 Valve Sizes 3/8-2 imensional ata Pipe Size 1/ / How to use Flow hart based on Kv imensional ata Pipe Size 3/8-3/ / Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. Special Purpose - Hot Water Hot Water Series Water Flow flow (GPM) Pressure rop (ar) Kv= 0.1 Kv= 0.21 Kv= 0.3 Kv= 0.46 Kv= 0.6 Kv= 3.0 Kv= 4.2 Kv= 4.7 Kv= 7.1 Kv= 23 Kv= Pressure rop drop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

42 2 Way Special Purpose Solenoid Valves Steam Series 1/8-2 Normally losed Features Wide Range of vailable Product Specifically designed for Steam Service up to +180º Teflon - PTFE Seals hoice of rass or Stainless Steel Valve ody Technical Specification Standard ody Material: rass 1/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: Stainless Steel Standard Seal Material: PTFE -200 to +180 Valve Sizes 1/8-1/4 Note: Temperature ranges indicate approved media temperatures for seal material. Special Purpose - Steam oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: Optional Protection lass: oil Insulation: pproved mbient Temperature: Media: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with IP67 EExd) M20 x 1.5 IP65 (in onnector) IP67 (EExd) lass H suitable for continuous duty -10º to +50º Steam Selection Guide Refer to flow data on next page Valve Sizes 3/8-2 Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 1/ / / / / P3X 1/ P4X 3/ P6X P7X 1-1/ P8X 1-1/ P9X P10X P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 39 Internet: Phone: +44 (0) Fax: +44 (0)

43 2 Way Special Purpose Solenoid Valves Steam Series 1/8-2 Normally losed Valve Sizes 1/8-1/4 Valve Sizes 3/8-2 imensional ata Pipe Size 3/8-1/ * 122 3/ * /4-1-1/ *imension Including in Plug imensional ata Pipe Size 1/ / Special Purpose - Steam How to use Flow hart based on Kv 1. Select the required flow, Kg/hr. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. Steam Series Steam Flow (Ib/Hr) Pressure rop (ar) 1 Kv= 0.3 Kv= 0.45 Kv=.60 Kv= 3.0 Kv= 4.2 Kv= 18.0 Kv=5.4 Kv= 21.0 Kv= Pressure rop (PSI) Steam Flow (Kg/Hr) Internet: Phone: +44 (0) Fax: +44 (0)

44 2 Way Special Purpose Solenoid Valves 68 Series ryogenic 1/4-2 Normally losed Features ontrols ryogenic Media down to -196º egreased and Individually Packaged for ryogenic Service Larger Porting for High Kv Teflon - PTFE Seals hoice of rass or Stainless Steel Valve ody Technical Specification Standard ody Material: rass 1/8 to 1 / ronze 1-1/4 to 2 Optional ody Material: Stainless Steel Standard Seal Material: PTFE -200 to +180 Valve Sizes 1/8-1/4 Note: Temperature ranges indicate approved media temperatures for seal material. Special Purpose - ryogenic oil Voltage : oil Voltage (50/60 Hz): Standard Electrical onnection: Standard Protection lass: oil Insulation: pproved mbient Temperature: Media: 12v, 24v, 110v 24v, 110v, 120v, 220v, 230v in onnector IN (PG9) (Optional with NEM 4) M20 x 1.5 IP65 lass H suitable for continuous duty -20º to +50º ryogenic (Liquid Nitrogen/Liquid Oxygen) Selection Guide Refer to flow data on next page Pipe Orifice P. Max OP (R) Power Weight atalogue Kv Size mm (R) oil oil Watts Kg. Number 1/ / / P3X 1/ P4X 3/ P6X P7X 1-1/ P8X 1-1/ P9X P10X Valve Sizes 3/8-2 P. Max: The maximum pressure a valve can be subjected to without causing damage to the valve components Operating Pressure ifferential (OP): The differential pressure range between the inlet and outlet ports at which the valve can safely operate atalogue figures represent tests carried out at +/- 10% of rated voltage in a 20 ambient Zero Pressure Rated (refer to OP): When the lower value of OP is zero, the valve will operate without pressure differential Otherwise this value represents the minimum pressure differential required to operate the valve atalogue Number: Represents the valve in its standard (base) configuration. Optional specification combinations will modify this number accordingly - consult manufacturer for details 41 Internet: Phone: +44 (0) Fax: +44 (0)

45 2 Way Special Purpose Solenoid Valves 68 Series ryogenic 1/4-2 Normally losed imensional ata Valve Sizes 3/8-2 Pipe Size 3/8-1/ * 122 3/ * /4-1-1/ *imension Including in Plug Valve Sizes 1/8-3/8 imensional ata Pipe Size 1/ / Special Purpose - ryogenic How to use Flow hart based on Kv 1. Select the required flow, L/Min. 3. Using Kv, (refer to the Selection Guide on the previous page), 2. Note the corresponding Kv and pressure drop. choose the desired valve by pipe size, Kv and atalogue Number. 68 Series ryogenic Water Flow (GPM) Pressure rop (ar) Kv= 0.43 Kv= 0.52 Kv= 3.0 Kv= 4.2 Kv= 5.4 Kv= 7.1 Kv= 18.0 Kv= Pressure rop (PSI) Water Flow (L/Min) 1.5 Internet: Phone: +44 (0) Fax: +44 (0)

46 Features Special purpose solenoid valves are used for controlling gases or liquids where a potentially explosive gas/air mixture is present in the atmosphere for long periods or likely to occur in normal operation. lcon flameproof enclosures are suitable for hazardous areas Zone 1 and Zone 2, for the control of Groups II, II, II gases. tex approved to EN60529 (IP67), EN50018, EN Special Purpose Solenoid Valves Hazardous reas 1/8-2 pplications Valves configured for Hazardous reas. User to consult all applicable codes, such as N.E.., EU irective 99/92/E, for definitions, performance and safety requirements associated with Hazardous rea lassification, pparatus Group, Zones, ivisions and Temperature lassifications. Special Purpose Valves pplicable to all catalogue valves except G, HN, HNO, HW, JN, JNO and HP. Technical Specification Power onsumption: Standard Material: Standard Finish: Optional Material: Optional Finish: Up to 14.5 Watt 212v or Up to 19 V 230V luminum with Stainless Steel Nameplate Epoxy Painted Type 316 Stainless Steel with Stainless Steel Nameplate Electro-polished, orrosion Resistant 31EExd 3 Way, Normally losed Standard Temperature Rating: Optional Temperature Rating: Electrical Entry: T6 within a -50º to +40º ambient range T4 within a -50º to +70º ambient range M20x1.5 or 1/2 N.P.T. dditional Weight; Standard Valve 1.3kg luminum 1.5kg Stainless Steel P10 EExd 2 Way, Normally losed TYPE 316 Stainless Steel EExd Electro-polished luminum EExd Epoxy Painted 43 Internet: Phone: +44 (0) Fax: +44 (0)

Solenoid Valves Catalogue

Solenoid Valves Catalogue Solenoid Valves Catalogue lcon Solenoid Valve Range US Keeping the World Flowing Contents Section Page Section Page Introduction 3 U Series 4 U Series Exd 6 U3/U33 Series 8 U3/U33 Series Exd 0 68 Series

More information

SV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves

SV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally

More information

A robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir.

A robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir. VI F79N Namur Solenoid Valve robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79 and Premiir. Features ompact design with standardized market proven NMR mounting

More information

MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD

MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD MINIMTI OMPT - OMPETITIVE - FLOW ONTROL NORTHVLE KORTING LT MINIMTI ontrol Valves range of compact, lightweight, low cost control valves for use on liquid steam or gas applications. vailable in 2 way and

More information

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in. Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.

More information

PROCESS & AUTOMATED VALVES

PROCESS & AUTOMATED VALVES Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline

More information

Poppet Valves Series

Poppet Valves Series Poppet Valves 750 Series ontents Section Page Introduction 750 Series Poppet Valve Pilot operated 4 /4 to / Pilot operated 5 /4 to Pilot operated 6 Pilot operated 7 /4 to / Pilot solenoid operated 8 /4

More information

3/2 ^ % Features. Construction. Electrical

3/2 ^ % Features. Construction. Electrical 4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing

More information

W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection

W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2

More information

503 Series Solenoid Pilot Actuated Valves

503 Series Solenoid Pilot Actuated Valves Solenoid Pilot ctuated Valves Offered by: Specialists in Valves, ontrols, Pneumatics, Fluid Measurement Phone: (203) 261-6711 www.okcautomation.com 5 Ported, 2 and 3 position, 4-way, Spool & Sleeve and

More information

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508

Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508 Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:

More information

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators

3-Way Mixing and Sequencing Globe Valves, Flared (5/8 in. O.D.) with Electric, Hydraulic, and Pneumatic Actuators lectric, Hydraulic, and Pneumatic ctuators TL 1. Select Valve ody including P ode (Valve Size, v Rating, Port ode) or select Valve ssemly correct (refer to Tale 3 and Tale 3 also) less ctuator ode (XXX)

More information

Electronic Temperature Control & Bulb Well Assembly (AC)

Electronic Temperature Control & Bulb Well Assembly (AC) Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed

More information

Cipriani Harrison Valves Corp.

Cipriani Harrison Valves Corp. pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum

More information

Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT

Air Actuated Stainless Ball Valves 2-Piece Stainless Steel, Full Port 1/4 to 2 NPT ir ctuated Stainless all Valves 2-Piece Stainless Steel, ull Port 1/4 to 2 SRIS eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve 316 stainless steel body, ball and stem

More information

CONTROL VALVES W910 Series

CONTROL VALVES W910 Series ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,

More information

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product

More information

G6125C, 2-Way, Pressure Compensated Flanged Globe Valve

G6125C, 2-Way, Pressure Compensated Flanged Globe Valve G6125, 2-ay, Pressure ompensated langed Globe Valve pplication This valve is typically used in large air handling units on heating or cooling coils. This valve is suitable for use in a hydronic system

More information

SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2

SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2 SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well

More information

VNA VNB SGC SGH VNC VNH VND VCC

VNA VNB SGC SGH VNC VNH VND VCC Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable

More information

Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT

Air Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 NPT ir ctuated all Valves 3-Piece Stainless Steel, ull Port 1/4 to 3 SERIES eatures Spring Return or ouble cting ctuators ull Port direct mount ISO5211 valve Swing-out bolted body design for easy maintenance

More information

Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT

Air Actuated 3-Way Ball Valves L-Port Brass, Standard Port 1/4 to 3 NPT ir ctuated 3-Way all Valves -Port rass, Standard Port 1/4 to 3 SERIES eatures Spring Return or ouble cting Standard Port 3-way flow path irect mount brass valve using standard ISO5211 ctuators designed

More information

SOLENOID VALVES direct operated core disc 1/4

SOLENOID VALVES direct operated core disc 1/4 SOLENOI VLVES direct operated core disc /4 N U NO / Series 4 FETURES ompact valve intended for single-acting actuator control Epoxy moulded coil for general service applications oils interchangeable without

More information

Center Center Exhaust Pressurized PS-32AS PS-32BS PS-32AD PS-32BD PS-520S PS-520D PS-53CD PS-53ED PS-53PD. Series PS. Function

Center Center Exhaust Pressurized PS-32AS PS-32BS PS-32AD PS-32BD PS-520S PS-520D PS-53CD PS-53ED PS-53PD. Series PS. Function DIRECTIONL CONTROL VLVES Directional Control Valves PS-SERIES 3/2, 5/2 and 5/3-way Single and double acting control Long lifespan Low energy consumption Standard manual override Wide range of operating

More information

CALEFFI. Motorised ball valve for central heating systems. 638 series 01196/18 GB. replaces dp 01196/12 GB

CALEFFI. Motorised ball valve for central heating systems. 638 series 01196/18 GB. replaces dp 01196/12 GB Motorised ball valve for central heating systems 638 series M 21654 003 LI 01196/18 G replaces dp 01196/12 G unction Motorised ball valves allows both automatic shut-off and diversion of the thermal medium

More information

VB-7000 Series 1/2 to 2 Globe Valves

VB-7000 Series 1/2 to 2 Globe Valves V-7000 Series 1/2 to 2 Globe Valves with MG350V Series SmartX ctuators schneider-electric.com 1 Product Description Schneider Electric MG350V non-spring actuators and V-7000 series two and three-way globe

More information

Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT

Air Actuated Ball Valves 3-Way T-Port Stainless Steel, Full Bore 1/4 to 2 NPT ir ctuated all Valves 3-Way T-Port Stainless Steel, ull ore 1/4 to 2 SRIS eatures ull Port 3-way T flow path irect mount valve with standard ISO5211 mount 316 stainless steel body, ball and stem ctuators

More information

SOLENOID VALVES direct operated core disc 1/4

SOLENOID VALVES direct operated core disc 1/4 SOLENOI VLVES direct operated core disc / N U NO / Series 70 FETURES Three-way solenoid valves with orifice and pipe connections in valve body enabling convenient installation ompact valve intended for

More information

ELD Series - DC Motor Drive

ELD Series - DC Motor Drive ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended

More information

Solenoid Pilot Actuated Valves

Solenoid Pilot Actuated Valves Solenoid Pilot ctuated Valves 02 Series irectional ontrol Valve www.asco.com Table of ontents 02 Series Features and enefits Performance ata How to Order Sandwich Option Kit 9 Speed ontrol Kit 9 Shut

More information

Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products.

Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components have made a significant

More information

3-Way Linked Globe Valve Assemblies with Linear Series Actuators

3-Way Linked Globe Valve Assemblies with Linear Series Actuators Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations

More information

Self-Acting Temperature Control Valve

Self-Acting Temperature Control Valve GLOE & NEELE Northeast ontrols Inc. Tel: 8454183435 Fax: 8455952471 www.dwyerstore.com Selfcting Temperature ontrol Valve Require No External Power Selfcting Temperature ontrol Valves require no external

More information

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa

How to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure

More information

Right Angle Control Valve 7051

Right Angle Control Valve 7051 Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium

More information

Instrument Ball Valves

Instrument Ball Valves www.swagelok.com Instrument all s 40 Series On-off, switching, and crossover flow paths Working pressures up to 3000 psig (206 bar) Temperatures from 50 to 150 (10 to 65 ) Low-temperature service option

More information

KIP Solenoid Selection

KIP Solenoid Selection KIP Solenoid Selection Solenoid Selection 1/2" NPT onduit dapter Nut Housing Stop Orifice (Normally Open) Spring Loaded Top Seal oil Plunger Spring, Plunger, tn ottom Seal Guide ssembly Shading ing ( Only)

More information

Poppet Series Compressed Air & Vacuum

Poppet Series Compressed Air & Vacuum Poppet Series ompressed ir & Vacuum www.asco.com Table of ontents Poppet eatures and enefits ow to Order N Series - ompressed ir Valve Solenoid ir Pilot ctuated /8" to /8" Technical ata /8" to /8" imensions

More information

High Pressure Solenoid Valves

High Pressure Solenoid Valves High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids

More information

Zero Differential Pressure Type Pilot Operated 2 Port Solenoid Valve

Zero Differential Pressure Type Pilot Operated 2 Port Solenoid Valve Zero ifferential Pressure Type Pilot Operated Port Solenoid Valve For ir, Water, Oil Reduced power consumption ( spec.) 7W VXZ:. W 0. W VXZ: 8 W New VX Z Series VXZ/ T.ES70- Solenoid valves for various

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

More information

VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves

VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves Product ulletin VG000 Issue ate 11/01/01 VG000 Series High-apacity/High-loseoff Electric Zone Valves VG000 Series High-apacity/High-loseoff Electric Zone Valves are designed to regulate the flow of water

More information

SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2

SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2 FTURS SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / SO/JOUOMTI solenoid valves satisfy all relevant irectives

More information

2-WAY AND 3-WAY MOTORIZED VALVES FOR STEAM, VACUUM AND HOT WATER APPLICATIONS

2-WAY AND 3-WAY MOTORIZED VALVES FOR STEAM, VACUUM AND HOT WATER APPLICATIONS R O R P O R T I O N -WY ND 3-WY MOTORIZED VLVES FOR STEM, VUUM ND HOT WTER PPLITIONS VLVE ND TUTOR FETURES Valve Sizes range from ½ inch to 8 inches -Way and 3-Way Single Seated and -Way Double Seated

More information

N/** поставка оборудования для подготовки воздуха

N/** поставка оборудования для подготовки воздуха M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:

More information

Flow Controls & Accessories

Flow Controls & Accessories Flow ontrols & ccessories Section Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Right ngle Series... 6-9 Needle Valves SPN Series...10 338 Series...11 SP Series heck Valve...12 339

More information

SOLENOID VALVES no voltage release (lever type) manual reset construction 3/8 to 1

SOLENOID VALVES no voltage release (lever type) manual reset construction 3/8 to 1 SOLNOI VLVS no voltage release (lever type) manual reset construction 3/8 to N NO 3 2 3/2 Series 308 TURS Lever type Manual Reset function which means that the valve has to be energized as well as manually

More information

HD(U) Series Valves HVAC Service Butterfly Valves 2-way and 3-way Assemblies

HD(U) Series Valves HVAC Service Butterfly Valves 2-way and 3-way Assemblies Features / enefits utterfly Valves H(U) Series Valves HV Service utterfly Valves 2-way and 3-way ssemblies elimo resilient seat H(U)... Series utterfly Valves are designed for use in NSI lass 150 piping

More information

Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.

Steam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam. Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable

More information

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold

More information

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300 ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality

More information

G765, 3-Way, Mixing Flanged Globe Valve

G765, 3-Way, Mixing Flanged Globe Valve G765, 3-Way, Mixing langed Globe Valve pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable

More information

The Complete Range of Fluid Power Products

The Complete Range of Fluid Power Products The omplete Range of Fluid Power Products lectropneumatics & ydraulics (India) Pvt. Ltd. Fluid Power ivision (FP) lectropneumatics Fluid Power ivision (FP) lectropneumatics and ydraulics (I) Pvt. Ltd.

More information

Data sheet Sheet No.: A3.101 Rev. A EL-O-MATIC ACTUATOR WITH INTEGRAL SOLENOID VALVES SVN Date: November 2009

Data sheet Sheet No.: A3.101 Rev. A EL-O-MATIC ACTUATOR WITH INTEGRAL SOLENOID VALVES SVN Date: November 2009 Sheet No.: 3.101 Rev. EL-O-MTI TUTOR WITH INTEGRL SOLENOI VLVES SVN F E G The El-O-Matic "SVN" Series solenoid valve mounts directly to the actuator air inlet manifold eliminating the need for tubing or

More information

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure

More information

Mid-West Instrument. Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106

Mid-West Instrument. Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106 Bellows Type Differential Pressure Gauges & Switches Model s 105 & 106 Dry Gauge Design with No Internal Liquid Fill BULLETIN NO. 105-106/12 (SUPERSEDES 105-106/11) Industrial ontrol Over Range Protection

More information

Two port valves. pneumatically actuated

Two port valves. pneumatically actuated Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use

More information

Series 8000 Air Actuated Valves for liquid service

Series 8000 Air Actuated Valves for liquid service ssembly Numbers Series 8000 ir ctuated Valves for liquid service 10-30.4-P - 1 To determine the configured item number: Select one choice from each of the following five categories onfigured Item Number

More information

G7100S, 3-Way, Mixing Flanged Globe Valve

G7100S, 3-Way, Mixing Flanged Globe Valve pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable flow. Suitable ctuators Non-Spring

More information

Smith Meter Truck Meter Packages Specifications

Smith Meter Truck Meter Packages Specifications Issue/Rev. 0.4 (8/12) P Meter Smith Meter Truck Meter Packages Specifications ulletin SS01095 TP (Ticket Printer) LN (Large Numeral ounter) Preset ounter Air Eliminator/ Strainer Faucet P Meter Smith Meter

More information

501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities

501 SERIES. 501 Series Directional Control Valve Platform. Featuring Higher Flow in a Compact Valve Package. Commissioning Capabilities 501 Series irectional ontrol Valve Platform Featuring Higher Flow in a ompact Valve Package ommissioning apabilities Solenoid air pilot actuated Low wattage.8 wall for application solenoids Polarity insensitive

More information

FEATURES TYPICAL APPLICATIONS. Vacuum and gaseous applications. Liquid, gelatinous and highly viscous media. High cycle applications.

FEATURES TYPICAL APPLICATIONS. Vacuum and gaseous applications. Liquid, gelatinous and highly viscous media. High cycle applications. VX Series High Pressure 2-way/3-way oaxial Valve High pressure coaxial valves are the best choice in process and fluid control and combine performance, economy and availability. FTURS i-directional compact

More information

8146 Series F16 CONTROLS CONTROL STATION IN POLYESTER RESIN. Features: Components:

8146 Series F16 CONTROLS CONTROL STATION IN POLYESTER RESIN. Features: Components: 8146 Series ONTROLS ONTROL STTION IN POLYESTER RESIN LSSIFITIONS NE- lass I, Zones 1 & 2 Ex e II T6 lass I, ivision 2, Groups,,, lass II, ivision 2, Groups F,G lass III NEM 3,4 & 4X; IP66 LISTE - FILE

More information

LIGHTWEIGHT + COMPACT. Rotary Union Solutions SPS. Series NPT CONNECTION SIZE OPTIONS

LIGHTWEIGHT + COMPACT. Rotary Union Solutions SPS. Series NPT CONNECTION SIZE OPTIONS LIGTWEIGT + OMPT Rotary Union Solutions Series NPT ONNETION SIZE OPTIONS ⅛" ½" ¼" ¾" ⅜" 1" Rotary Union Solutions ontents bout STI 3 What is a Rotary Union? 4 Series Overview 5 ow To Order 7 Specifi cations

More information

RS Series. Three way rotary valves for temperature control systems

RS Series. Three way rotary valves for temperature control systems RS Series Three way rotary valves for temperature control systems R S RS Three way rotary valve for temperature control systems RS 3-way rotary valve for temperature control systems High Efficiency Mixing

More information

NEMA Contactors & Starters A200

NEMA Contactors & Starters A200 March 007 NM ontactors & Starters 00 ontactors Non-reversing and Reversing -7 ontents escription Page ontactors Non-reversing and Reversing............ -7 Product escription Sizes 00 4............ -7 Product

More information

DEP7 SG Iron Excess Pressure Valve

DEP7 SG Iron Excess Pressure Valve Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical

^ % 3/2 5/2 SERIES 362/562. Features. Construction. Nominal Ambient Temp. Ranges. Electrical Pilot Operated Stainless Steel Spool Valves xplosionproof Solenoid Valves 6 Stainless Steel odies /4" NPT / / SRIS 6/6 eatures Ideal for valve automation for the oil and gas market Reliable, robust design

More information

Selection Guide. Vx-7000 & Vx-9000 Series Mx4x-6xxx & Mx4x-7xxx Series. Globe Valve Assemblies. Actuator/Linkage Assemblies

Selection Guide. Vx-7000 & Vx-9000 Series Mx4x-6xxx & Mx4x-7xxx Series. Globe Valve Assemblies. Actuator/Linkage Assemblies Vx-7000 & Vx-9000 Series Mxx-6xxx & Mxx-7xxx Series Selection Guide Linked Globe Valve ssemblies ctuator/linkage ssemblies with DuraDrive ctuators Globe Valve ssemblies The V, VF, and VS-7000 and -9000

More information

MagHex Fan Controller

MagHex Fan Controller MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling

More information

Model ZW204 Non-Modulating Float Valve

Model ZW204 Non-Modulating Float Valve Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the

More information

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t

Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting

More information

ELD Series - DC Motor Drive

ELD Series - DC Motor Drive ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended

More information

1WE70: 1000 WOG - Stainless Steel Ball Valve 3-Way NPT Ends Stainless Steel Full Port Direct Mount Actuation Design

1WE70: 1000 WOG - Stainless Steel Ball Valve 3-Way NPT Ends Stainless Steel Full Port Direct Mount Actuation Design 1WE70: 1000 W - Stainless Steel all Valve 3-Way NP Ends Stainless Steel ull Port Direct Mount ctuation Design SNDRD SPEIIINS eneral Description 3-Way SME 150 Stainless Steel all Valve Item # 1WE70-R-SS-N-

More information

F6 Series 2-Way, Victaulic Butterfly Valve

F6 Series 2-Way, Victaulic Butterfly Valve F6 Series 2-Way, Victaulic utterfly Valve psi (2 to 12 ) bubble tight shut-off Long stem design allows for 2 insulation ompletely assembled and tested, ready for installation pplication These valves are

More information

PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio

PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with

More information

8146 Series Terminal Boxes

8146 Series Terminal Boxes 8146 Series Terminal oxes TERMINTION Ready-Term 8146 Terminal oxes Features: Pre-onfigured with terminals mounted Made of Fiberglass Reinforced Polyester (FRP) 8 enclosure sizes with different depths For

More information

G7150D, 3-Way, Diverting Flanged Globe Valve

G7150D, 3-Way, Diverting Flanged Globe Valve G7150D, 3-ay, Diverting Flanged Globe Valve pplication This valve is typically used in Large ir Handling Units on heating or cooling coils. This valve is suitable for use in a hydronic system with variable

More information

C-316 SERIES. Bulletin C

C-316 SERIES. Bulletin C ulletin -316 2014-316 SERIES Versa Product ompany, Inc., 22 Valley Rd., Paramus, NJ 07652 US Phone: (201)-843-2400 Fax: (201)-843-2931 Versa V, Prins Willem lexanderlaan 1429, 7312 G peldoorn, The Netherlands

More information

PVL Series. Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves. Section C. C59

PVL Series. Solenoid & Remote Pilot Operated 1/8 & 1/4 Valves. Section C.   C59 Series Solenoid & Remote Pilot Operated /8" & /4" Valves Section Moduflex www.parker.com/pneu/pvl asic Valve unctions...60 Stacking pplications...6-62 eatures ( & )...63 ommon Part Numbers-Stacking ( &

More information

The H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control valve

The H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control valve High Pressure Valves Series H Bulletin H-Tech 0 VALVES The H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control valves

More information

Series VC Direct Operated 2 Port Solenoid Valve for Oil. Series VCL VX VN VQ VDW VC LV PA

Series VC Direct Operated 2 Port Solenoid Valve for Oil. Series VCL VX VN VQ VDW VC LV PA Series V irect Operated Port Solenoid Valve for Oil Series V VX VN V VW V V P.-9 Multipurpose Valve for Oil irect Operated Port Solenoid Valve for Oil Series V Kerosene, uel oil class (fuel oil ), Silicone

More information

SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2

SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2 SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well

More information

MK Series High Performance Butterfly Submittal/Technical Data

MK Series High Performance Butterfly Submittal/Technical Data MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041

More information

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi)

SV9A-10-E - Solenoid Valve 4-way, 3-position spool type solenoid valve Up to 36 L/min (9.5 USgpm) 210 bar (3000 psi) SV9--E - Solenoid Valve -way, -position spool type solenoid valve Up to 6 L/min (9.5 USgpm) bar ( psi) () () (P) (T) In the de-energized position all ports are closed. When solenoid '' is energized flow

More information

F20 & F21 QIX Particulate & Coalescing Filters

F20 & F21 QIX Particulate & Coalescing Filters F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port

More information

A range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors

A range of cost saving solutions. Flowmeters &Monitors. Flowmeters &monitors range of cost saving solutions Flowmeters &Monitors 29 Flowmeters &monitors LoFlow - and Flowmeters Easy to read, permanent printed scales. Large scale definition for precise measurement. Easy panel mounting

More information

G765, 3-Way, Mixing Flanged Globe Valve

G765, 3-Way, Mixing Flanged Globe Valve pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable flow. Suitable ctuators Non-Spring

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated

More information

3/2 SRIS Important These solenoid valves are intended for use on clean dry air, inert gas, or sweet dry natural gas filtered to 40 micron or bet

3/2 SRIS Important These solenoid valves are intended for use on clean dry air, inert gas, or sweet dry natural gas filtered to 40 micron or bet 4 Pilot Operated Spool Valves xplosionproof Solenoid Valves 316L odies 1/4" NPT 3/2 SRIS 364 eatures Ideal for oil and gas control panel applications rop-in replacement design - compatible with most existing

More information

DG Series Flanged Globe Valves

DG Series Flanged Globe Valves G Series Globe Valves provide stable and accurate control of both water, 50/50 water Glycol solutions and steam heat exchangers on fan coil units, VAV reheat coils, and air handling units up to 900 GPM.

More information

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref:

ZEUS type BRONZE PNEUMATIC ACTUATED VALVE. Model/Ref: ZEUS type BRONZE PNEUMATIC ACTUATED VALVE Model/Ref: 1422203 www.lauridsenindustri.com CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework.

More information

STEAM TRAPS. Float and Thermostatic Steam Traps (continued) Series C and X. Dimensions in. (mm)

STEAM TRAPS. Float and Thermostatic Steam Traps (continued) Series C and X. Dimensions in. (mm) STM TRPS loat and Thermostatic (continued) Series and X or large high capacity units s available: Series : 1 1 /4" NPT and SPT 1 1 /2" NPT and SPT 2" NPT and SPT 2 1 /2" NPT Series X: 2" NPT Resistant

More information

QUANTUM. Quantum Low Power Control Monitor LOW POWER CONTROL MONITOR. " Design Features

QUANTUM. Quantum Low Power Control Monitor LOW POWER CONTROL MONITOR.  Design Features LOW POWER ONTROL MONITOR Quantum Low Power ontrol Monitor " esign Features Single oil " General Purpose " Nonincendive " Explosionproof " Intrinsically Safe ual oil " General Purpose " Nonincendive " Explosionproof

More information

EEA & EEB Series. UL Recognized CSA Certified VDE Approved EEA2 / EEB2

EEA & EEB Series. UL Recognized CSA Certified VDE Approved EEA2 / EEB2 atalog: 16541 Issue ate: 6.11 Including the S/S and H/H Models ost-effective MI Power Inlet Filter UL Recognized S ertified V pproved 2 / 2 1 / 1 P / P Series ompact single stage MI filter with I 63-1

More information

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2" & 3/4" Ports. Technical & Service Data. Pneumatic

4-Way, 5-Port, 2 & 3-Position Solenoid and Remote Pilot 1/2 & 3/4 Ports. Technical & Service Data. Pneumatic atalog VL-UTO-/US (Revised 6/0/0) pplication & Model Selection S utomotive Subbase Valves -Way, -ort, & -osition Solenoid and Remote ilot /" & /" orts pplication ual pressure or diverter valve operation

More information

G780, 3-Way, Mixing Flanged Globe Valve

G780, 3-Way, Mixing Flanged Globe Valve G780, 3-Way, Mixing langed Globe Valve pplication This valve is typically used in large ir Handling Units (HU) on heating or cooling coils. This valve is suitable for use in a hydronic system with variable

More information

KEY FEATURES. Product Overview. Product Line Drawing

KEY FEATURES. Product Overview. Product Line Drawing Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable

More information

B1F. B Series Forged Brass Ball Valves 5.1

B1F. B Series Forged Brass Ball Valves 5.1 ** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged

More information

1WE40: Economy WOG - Stainless Steel Ball Valve 3-Piece Socket Weld Ends Stainless Steel Full Port Direct Mount Actuation Design

1WE40: Economy WOG - Stainless Steel Ball Valve 3-Piece Socket Weld Ends Stainless Steel Full Port Direct Mount Actuation Design 1WE40: Economy - 1000 W - Stainless Steel all Valve 3-Piece Socket Weld Ends Stainless Steel ull Port Direct Mount ctuation Design SNDRD SPEIIINS eneral Description Item # Economy 3-P 1000 W SW ull Port

More information