Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
|
|
- Magnus Ellis
- 6 years ago
- Views:
Transcription
1 s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings Nor-al Products, Inc. 967 South Oregon Street Yreka, US Tel: or Main Fax: Sales Fax:
2 s & Fittings NW General Information SETION. SPEIFITIONS Tube sizes: 3 /8 to inches (9.53 to 50.8mm) Materials : 304 or 36L stainless steel O-rings: Viton, una & silicone Fittings Tube finishes: eadblast standard (Tumbled & electropolish available) Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50 Nor-al NW flanges are designed to ISO 86 specifications for standard US tube sizes from 3 /8 to inches (9.53 to 50.8mm). They are compatible with other manufacturers ISO-KF style flanges. NW flanges utilize an aluminum clamp with a single wing nut fastener or a lockover-center clamp allowing frequent disassembly without tools. The vacuum seal is effected by the application of uniform pressure from the clamp on the 5º surface of the 304 stainless steel flanges. The mating flange surfaces compress a Viton O-ring held in place by a centering ring. The resultant seal can be used in vacuum applications of up to 0-8 mbar and baked to 00º, however sustained baking above 50º may result in deterioration of O-rings. dditionally, NW flanges allow components to be rotated before assembly for ease of component alignment. NW flanges are available on virtually all Nor-al components and fittings. Nor-al manufactures a full line of NW adapters so you can add to or build an entire system with NW components. (See adapters - Section.7) NW flanges can also be used with chain clamps and aluminum seals to obtain a UHV seal bakeable to 50º. (chain clamps and seals are described in Tube entering Ring detail in Section..) New Products Trapped entering Rings Wingnut lamp O-ring Nor-al trapped centering rings for NW flanges feature easy assembly with exact centering and are appropriate for vacuum or pressure by externally supporting the sealing ring. Trapped O-rings are intended for use where pressures range from rough vacuum to above atmosphere. pplications include vacuum pump exhaust lines and abatement tools. O-ring with entering Ring ll dimensions are in inches (mm) & weights SureSeal lamp with Lanyard Lock Ultra-High Vacuum omponents Since 96
3 SETION. SETION. s & Fittings NW ored lank s & lank Off aps.50 (3.8).50 (3.8) iagram iagram NW ored lank s (NW) IGRM TUE NW / 8 (9.53) 0.38 (9.65) 0.36 (8.8).8 (9.97) NW (.70) 0.5 (.95) 0.45 (.46).8 (9.97) NW / 8 (9.53) 0.38 (9.65) 0.36 (8.8).8 (9.97) NW (.70) 0.5 (.95) 0.45 (.46).8 (9.97) NW (9.05) 0.76 (9.30) 0.68 (7.7).8 (9.97) NW / 8 (9.53) 0.38 (9.65) 0.36 (8.8).575 (40.0) NW (.70) 0.5 (.95) 0.45 (.46).575 (40.0) NW (9.05) 0.76 (9.30) 0.75 (8.6).575 (40.0) NW-5-00 (5.40).0 (5.65) (3.83).575 (40.0) NW / 8 (9.53) 0.38 (9.65).36 (8.8).6 (54.86) NW (.70) 0.5 (.95) 0.45 (.46).6 (54.86) NW (9.05) 0.76 (9.30) 0.75 (8.6).6 (54.86) NW (5.40).0 (5.65) (3.83).6 (54.86) NW (38.0).5 (38.35).438 (36.53).6 (54.86) NW / 8 (9.53) 0.38 (9.65).36 (8.8).95 (74.93) NW (.70) 0.5 (.95) 0.45 (.46).95 (74.93) NW (9.05) 0.76 (9.30) 0.75 (8.6).95 (74.93) NW (5.40).0 (5.65) (3.83).95 (74.93) NW (38.0).5 (38.35).438 (36.53).95 (74.93) NW (50.80).0 (5.05).938 (49.3).95 (74.93) NW 36L Stainless Steel ored lank s (NW) IGRM TUE NW L (5.40).0 (5.65) (3.83).575 (40.0) NW L (38.0).5 (38.35).438 (36.53).6 (54.86) NW L (50.80).0 (5.05).938 (49.3).95 (74.93) SPEIFITIONS Tube sizes: 3 /8 to inches (9.53 to 50.8mm) Materials : 304 or 36L stainless steel O-rings: Viton, una & silicone Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50 lank Off aps NW (5.08).8 (9.97) NW (5.08).8 (9.97) NW (5.08).575 (40.0) NW (5.08).6 (54.86) NW (5.08).95 (74.93) 36L lank Off aps NW-6-36L 0.00 (5.08).8 (9.97) NW-5-36L 0.00 (5.08).575 (40.0) NW-40-36L 0.00 (5.08).6 (54.86) NW-50-36L 0.00 (5.08).95 (74.93) ll dimensions are in inches (mm) & weights See Section. for metal seals 3 Ultra-High Vacuum omponents Since 96
4 s & Fittings NW Socket Weld & Weld Neck s SETION. SETION. NW Socket Weld s TUE E NW-0-SW (.70).8 (9.97) 0.48 (.9) 0.5 (.95) 0.6 (5.49) - NW-6-SW 3 (9.05).8 (9.97) 0.68 (7.7) 0.76 (9.30) (0.7) - NW-5-SW (5.40).575 (40.0).03 (6.9).0 (5.65).4 (8.96) (3.83) NW-40-SW (38.0).6 (54.86).6 (4.5).5 (38.35).64 (4.66).438 (36.53) NW-50-SW (50.80).95 (74.93).06 (5.3).0 (5.05).4 (54.36).938 (49.3).500 (.7).50 (3.8) E.0 (3.05).575 (40.0).00 (.54) 5 NW Long Weld Neck s NW-0FL.8 (9.97) 0.48 (.9) 0.38 (9.65) (.70) NW-6FL.8 (9.97) 0.68 (7.7) 0.65 (5.88) 3 (9.05) NW-5FL.575 (40.0).03 (6.9) 0.87 (.0) (5.40) NW-40FL.6 (54.86).6 (4.5).37 (34.80) (38.0) NW-50FL.95 (74.93).06 (5.3).87 (47.50) (50.80) NW 36L Stainless Steel Long Weld Neck s NW-5FL-36L.575 (40.0).03 (6.9) 0.87 (.0) (5.40) NW-40FL-36L.6 (54.86).6 (4.5).37 (34.80) (38.0) NW-50FL-36L.95 (74.93).06 (5.3).87 (47.50) (50.80) NW Short Weld Neck s TUE E IGRM NW-0F (.70).8 (9.97) 0.48 (.9) 0.38 (9.65) (.70) 0.5 (.70) NW-6F 3 (9.05).8 (9.97) 0.68 (7.7) 0.65 (5.88) 3 (9.05) 0.56 (4.) NW-6F 3 (9.05).8 (9.97) 0.68 (7.7) 0.65 (5.88) 3 (9.05) 0.5 (.70) NW-5F (5.40).575 (40.0).03 (6.9).087 (.0) (5.40) 0.5 (.70) NW-40F (38.0).6 (54.86).6 (4.5).37 (34.80) (38.0) 0.75 (9.05) NW-50F (50.80).95 (74.93).06 (5.3).87 (47.50) (50.80) 0.75 (9.05) E.0 (3.05) iagram.00 (.54) 5 o E.0 (3.05) iagram.00 (.54) 5 o SPEIFITIONS Tube sizes: 3 /8 to inches (9.53 to 50.8mm) Materials : 304 or 36L stainless steel O-rings: Viton, una & silicone Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to (7.07) ll dimensions are in inches (mm) & weights See Section. for metal seals Ultra-High Vacuum omponents Since
5 SETION. s & Fittings NW ssembly Hardware NW Wing Nut lamps NW-0-P.69 (4.93).39 (60.76) 0.65 (5.88) NW-6-P.69 (4.93).39 (60.76) 0.65 (5.88) NW-5-P.4 (54.36).796 (7.0) 0.65 (5.88) NW-40-P.75 (69.85) (87.30) 0.65 (5.88) NW-50-P 3.50 (88.90) 4.45 (07.8) 0.70 (8.03) NW SureSeal lamps NW-0-SS.750 (44.45).39 (60.76) 0.74 (8.8) NW-6-SS.750 (44.45).39 (60.76) 0.74 (8.8) NW-40-SS.947 (74.85) (87.30) 0.74 (8.8) NW-50-SS (96.) 4.45 (07.8) (.3) NW SureSeal lamps with Lanyard Nor-al Wing Nut and SureSeal NW lamps feature special centering ribs and evenly distributed clamping force to assure uniform O-ring compression and reduce the probability of failure under loads. dditional hinge knuckles and tighter manufacturing tolerances result in precise alignment and reduced side play. lamp opening is limited to facilitate one-handed installation in hard-to-reach spaces. In addition to the above features, the SureSeal clamp provides instant closure with a fixed geometry to attain optimal O-ring compression. ll Nor-al NW clamps are designed and manufactured to meet Pneurop specifications for ISO-KF 0 through 50 flanges, so you can be confident of universal compatibility. We also provide chain clamps and metal seals for ISO-KF components to transform them from high vacuum to ultra-high vacuum connections. NW-0-SS-L.750 (44.45).39 (60.76) 0.74 (8.8) NW-6-SS-L.750 (44.45).39 (60.76) 0.74 (8.8) NW-40-SS-L.947 (74.85) (87.30) 0.74 (8.8) NW-50-SS-L (96.) 4.45 (07.8) (.3) LMP NW lamp learance etails FLNGE MIN. I. TO INSTLL MX. I. LOSE MIN. I. LOSE NW-0-P NW-0.86 (7.64).65 (67.3).75 (44.45) NW-6-P NW-6.86 (7.64).65 (67.3).75 (44.45) NW-5-P NW (84.33) 3.00 (76.0).4 (56.90) NW-40-P NW (0.60) 3.7 (94.49).90 (73.66) NW-50-P NW (38.43) 4.6 (7.35) 3.69 (93.73) 0.57 ll dimensions are in inches (mm) & weights NW ulkhead lamps OF SREWS THROUGH HOLE NW-6-P.00 (50.80).50 (38.0) 0.36 (9.7) (.86) NW-5-P.37 (60.0).89 (48.0).0387 (9.83) 6.6 (3.00) NW-40-P.94 (74.68).44 (6.98) (9.30) 6.84(46.74) NW-50-P 3.75 (95.5) 3.5 (8.55) (0.6) 8.35 (59.69) dd -MS for metric bolts ulkhead clamps provide a simple means of fastening an NW flange to a baseplate. Each aluminum clamp is sold with stainless steel socket head cap screws and washers for attachment. Leave inch (mm) minimum between the bottom of the tapped hole and the inside of the chamber wall. 0-3 x 5/ 8 " Screws NW ulkhead or aseplate ulkhead lamps NW entering Ring 5 Ultra-High Vacuum omponents Since 96
6 s & Fittings9 NW entering Rings SETION. Nor-al offers aluminum and stainless steel centering rings for NW and ISO flanges. una, silicone and Viton O-rings are available for NW, while una and Viton are stocked for ISO centering rings. luminum ISO centering rings are provided with an aluminum spacer ring. Stainless steel ISO centering rings are also provided with aluminum spacer rings as an option. NW luminum entering Rings with O-ring MTERIL NW-0-R-V Viton (.4) (.58) NW-0-R- una (.4) (.58) NW-6-R-V Viton (6.99) 0.65 (5.88) NW-6-R- una (6.99) 0.65 (5.88) NW-5-R-V Viton.04 (6.0) (4.99) NW-5-R- una.04 (6.0) (4.99) NW-40-R-V Viton.64 (4.00).57 (39.88) NW-40-R- una.64 (4.00).57 (39.88) NW-50-R-V Viton.047 (5.99).967 (49.96) NW-50-R- una.047 (5.99).967 (49.96).30 (7.87).0 (5.33).54 (3.9) NW Stainless Steel entering Rings with O-ring MTERIL NW-0-R-SV Viton (.4) (.58) NW-0-R-SS Silicone (.4) (.58) NW-0-R-S una (.4) (.58) NW-6-R-SV Viton (6.99) 0.65 (5.88) NW-6-R-SS Silicone (6.99) 0.65 (5.88) NW-6-R-S una (6.99) 0.65 (5.88) NW-5-R-SV Viton.04 (6.0) (4.99) NW-5-R-SS Silicone.04 (6.0) (4.99) NW-5-R-S una.04 (6.0) (4.99) NW-40-R-SV Viton.64 (4.00).570 (39.88) NW-40-R-SS Silicone.64 (4.00).570 (39.88) NW-40-R-S una.64 (4.00).570 (39.88) NW-50-R-SV Viton.047 (5.99).967 (49.96) NW-50-R-SS Silicone.047 (5.99).967 (49.96) NW-50-R-S una.047 (5.99).967 (49.96).30 (7.87).0 (5.33).54 (3.9) NW 36L Stainless Steel entering Rings with O-ring MTERIL NW-5-R-SV-36L Viton.04 (6.0) (4.99) NW-40-R-SV-36L Viton.64 (4.00).570 (39.88) NW-50-R-SV-36L Viton.047 (5.99).967 (49.96).30 (7.87).0 (5.33).54 (3.9) ll dimensions are in inches (mm) & weights See page 6 for replacement O-rings Ultra-High Vacuum omponents Since
7 SETION. s & Fittings NW entering Rings & Replacement O-rings.30 (7.87).0 (5.33).54 (3.9) NW Screened Stainless Steel entering Rings with Viton O-ring MTERIL MESH NW-5-R-SV-74 Viton.04 (6.0) (4.99) 74 NW-40-R-SV-74 Viton.64 (4.00).570 (39.88) 74 NW-50-R-SV-74 Viton.047 (5.99).967 (49.96) (7.87).54 (3.9).0 (5.33) NW Reducer Stainless Steel entering Rings with Viton O-ring MTERIL NW-0/6-R Viton 0.48 (.9) 0.67 (7.0) NW-0/5-R Viton 0.87 (.0).0 (5.9) NW-3/40-R Viton.34 (34.04).6 (40.89) una and Silicone O-rings available. all for pricing. For dimensions refer to the centering ring/o-ring assembly drawing on the previous page and the overpressure ring diagram this page. NW Stainless Steel entering Rings with Viton O-ring and Over Pressure Ring NW-0-R-SV-PR NW-6-R-SV-PR NW-5-R-SV-PR NW-40-R-SV-PR NW-50-R-SV-PR una and Silicone O-rings available. all for pricing. ESRIPTION ontains model numbers NW-0-PR and NW-0-R-SV ontains model numbers NW-6-PR and NW-6-R-SV ontains model numbers NW-5-PR and NW-5-R-SV ontains model numbers NW-40-PR and NW-40-R-SV ontains model numbers NW-50-PR and NW-50-R-SV NW Stainless Steel Over Pressure Rings MXIMUM PSIG NW-0-PR.5 (3.75).86 (30.) (8.79) 00 NW-6-PR.5 (3.75).86 (30.) (8.79) 00 NW-5-PR.66 (4.6).583 (40.) (8.79) 00 NW-40-PR.5 (57.5).69 (55.09) (8.79) 75 NW-50-PR.75 (69.85).60 (66.55) 0.45 (3.68) (3.9) NW Stainless Steel aptured entering Rings with Viton O-ring MTERIL MXIMUM PSIG NW-6-R-SV Viton.5 (3.75) 0.65 (5.88) 00 NW-5-R-SV Viton.66 (4.6) (4.99) 00 NW-40-R-SV Viton.5 (57.5).570 (39.88) 75 NW-50-R-SV Viton.75 (69.85).967 (49.96) 50 una and Silicone O-rings available. all for pricing..57 (3.99).35 (8.00) NW trapped centering rings are composed of an aluminum outer ring, Viton O-ring, and stainless steel centering ring NW Stainless Steel Trapped entering Rings with O-ring MTERIL NW-0/6-RT-SV Viton.8 (9.97) 0.63 (6.00) 0.9 (3.) NW-5-RT-SV Viton.58 (40.3) 0.95 (4.3).3 (33.0) NW-40-RT-SV Viton.7 (55.).58 (40.3).89 (48.0) NW-50-RT-SV Viton.95 (74.93).97 (50.04).3 (58.93) una and Silicone O-rings available. all for pricing. ll dimensions are in inches (mm) & weights Viton O-Rings NW-0-OR-V NW-6-OR-V NW-5-OR-V NW-40-OR-V NW-50-OR-V FLNGE TYPE NW-0 NW-6 NW-5 NW-40 NW-50 Silicone O-Rings NW-0-OR-S NW-6-OR-S NW-5-OR-S NW-40-OR-S NW-50-OR-S FLNGE TYPE NW-0 NW-6 NW-5 NW-40 NW-50 una O-Rings NW-0-OR- NW-6-OR- NW-5-OR- NW-40-OR- NW-50-OR- FLNGE TYPE NW-0 NW-6 NW-5 NW-40 NW-50 7 Ultra-High Vacuum omponents Since 96
8 s & Fittings NW Fittings SETION. SPEIFITIONS Tube sizes: / to inches (.7 to 50.8mm) Materials : 304 stainless steel (36L available upon request) O-rings: Viton, una & silicone Fittings Tube finishes: eadblast standard (Tumbled & electropolish available) Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50 See Section. for metal seals Nor-al manufactures a complete line of NW vacuum fittings. The tube portions are fabricated from 304 stainless steel. 36L stainless steel can be supplied on request. Nor-al makes its own elbows, and all tees and crosses are made with the pulled-port technique. This allows smooth, crevice-free butt welds to provide the maximum in cleanliness for UHV applications. akeout range is up to 00. Nor-al fittings are also available with F, ISO and S flanges. Standard finish is bead blasted. Electropolished finish can also be provided as an option. all for pricing. NW Half Nipples TUE N-NW-0 (.70).5 (3.75) N-NW-6 3 (9.05).5 (9.) N-NW-5 (5.40).03 (5.56) N-NW-40 (38.0).40 (60.96) N-NW-50 (50.80) 3.5 (80.0) NW Full Nipples TUE N-NW-0 (.70).50 (63.50) N-NW-6 3 (9.05).30 (58.4) N-NW-5 (5.40) 4.06 (03.) N-NW-40 (38.0) 4.80 (.9) N-NW-50 (50.80) 6.30 (60.0) ll dimensions are in inches (mm) & weights Ultra-High Vacuum omponents Since
9 SETION. s & Fittings NW Fittings NW Reducer Nipples FLNGE FLNGE TUE NR-NW-6-0 NW-6 NW-0 (.70).40 (35.56) NR-NW-5-0 NW-5 NW-0 (.70).40 (35.56) NR-NW-5-6 NW-5 NW-6 3 (9.05).30 (33.0) NR-NW-40-0 NW-40 NW-0 (.70).40 (35.56) NR-NW-40-6 NW-40 NW-6 3 (9.05).30 (33.0) NR-NW-40-5 NW-40 NW-5 (5.40).8 (55.37) NR-NW-50-0 NW-50 NW-0 (.70).40 (35.56) NR-NW-50-6 NW-50 NW-6 3 (9.05).30 (33.0) NR-NW-50-5 NW-50 NW-5 (5.40).8 (55.37) NR-NW NW-50 NW-40 (38.0).55 (64.77) NW onical Reducer Nipples FLNGE FLNGE NR-NW-5-6 NW-5 NW (5.75).57 (39.88) NR-NW-40-6 NW-40 NW (5.75).57 (39.88) NR-NW-50-6 NW-50 NW (5.75).57 (39.88) NR-NW-40-5 NW-40 NW (.0).57 (39.88) NR-NW-50-5 NW-50 NW (.0).57 (39.88) NR-NW NW-50 NW (35.05).57 (39.88) NW 36L onical Reducer Nipples FLNGE FLNGE NR-NW L NW-40 NW (.0).57 (39.88) NR-NW L NW-50 NW (.0).57 (39.88) Typ. NW Tees TUE 3T-NW-0 (.70).5 (3.75) 3T-NW-6 3 (9.05).5 (9.) 3T-NW-5 (5.40).03 (5.56) 3T-NW-40 (38.0).40 (60.96) 3T-NW-40H (38.0).56 (65.0) 3T-NW-50 (50.80) 3.5 (80.0) 3T-NW-50H (50.80).76 (70.0) NW Reducer Tees TUE & RM TUE 3 LEG 3TR-NW-5-6 (5.40) 3 (9.05).03 (5.56).7 (3.6) 3TR-NW-40-6 (38.0) 3 (9.05).40 (60.96).53 (38.86) 3TR-NW-40-5 (38.0) (5.40).40 (60.96).8 (57.9) 3TR-NW-50-6 (50.80) 3 (9.05) 3.5 (80.0).78 (45.) 3TR-NW (50.80) (38.0) 3.5 (80.0).65 (67.3) 3 Typ. 9 Ultra-High Vacuum omponents Since 96
10 s & Fittings NW Fittings SETION. NW 45 Radius Elbows TUE K-NW-5 (5.40) 0.77 (9.56) K-NW-40 (38.0).08 (7.43) K-NW-50 (50.80).39 (35.3) NW 45 Radius Elbows with Tangents TUE KL-NW-6 3 (9.05) 0.9 (3.) KL-NW-5 (5.40). (8.45) KL-NW-40 (38.0).68 (4.67) KL-NW-50 (50.80).99 (50.55) NW 90 Radius Elbows TUE E-NW-0 (.70).5 (3.75) 0.75 (9.05) E-NW-6 3 (9.05).5 (9.).00 (5.40) E-NW-5 (5.40).65 (4.9).50 (38.0) E-NW-40 (38.0).40 (60.96).5 (57.5) E-NW-40H (38.0).56 (65.0).5 (57.5) E-NW-40HL (38.0) 5. (30.05).5 (57.5) E-NW-50 (50.80) 3.5 (80.0) 3.00 (76.0) E-NW-50HL (50.80) 5.5 (39.95) 3.00 (76.0) Typ. Typ. Typ. NW 90 Mitered Elbows TUE E-NW-6M 3 (9.05).5 (9.) E-NW-5M (5.40).03 (5.56) E-NW-40M (38.0).40 (60.96) E-NW-40MH (38.0).56 (65.0) E-NW-50M (50.80) 3.5 (80.0) E-NW-50MH (50.80).76 (70.0) Typ. ll dimensions are in inches (mm) & weights Ultra-High Vacuum omponents Since
11 SETION. s & Fittings NW Fittings Typ. NW 4-Way rosses TUE 4-NW-0 (.70).5 (3.75) 4-NW-6 3 (9.05).5 (9.) 4-NW-5 (5.40).03 (5.56) 4-NW-40 (38.0).40 (60.96) 4-NW-40H (38.0).56 (65.0) 4-NW-50 (50.80) 3.5 (80.0) 4-NW-50H (50.80).76 (70.0) 3 NW Reducer rosses TUE & TUE 3 & 4 4R-NW-5-6 (5.40) 3 (9.05).03 (5.56).7 (3.6) 4R-NW-40-6 (38.0) 3 (9.05).40 (60.96).53 (38.86) 4R-NW-40-5 (38.0) (5.40).40 (60.96).8 (57.9) 4R-NW-50-6 (50.80) 3 (9.05) 3.5 (80.0).78 (45.) 4R-NW (50.80) (38.0) 3.5 (80.0).65 (67.3) Typ. 4 Typ. 5th Leg Opposite Typ. NW 5-Way rosses TUE 5-NW-6 3 (9.05).50 (38.0) 5-NW-5 (5.40).03 (5.56) 5-NW-40 (38.0).40 (60.96) 5-NW-50 (50.80) 3.5 (80.0) Typ. NW 6-Way rosses TUE 6-NW-6 3 (9.05).50 (38.0) 6-NW-5 (5.40).03 (5.56) 6-NW-40 (38.0).40 (60.96) 6-NW-50 (50.80) 3.5 (80.0) 6th Leg Opposite Typ. ll dimensions are in inches (mm) & weights Ultra-High Vacuum omponents Since 96
Nor-Cal Products. where technology takes shape. vacuum products catalog
Nor-al Products where technology takes shape vacuum products catalog s & Fittings Section Two.0 s & Fittings General Information 8. NW s & Fittings 9. ISO s & Fittings 9.3 S s & Fittings 38.4 F s & Fittings
More informationPrices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are
More informationSECTION 3.2 INTRODUCTION ISO KF & LF FLANGES
SECTION 3.2 INTRUCTION 3.81 ISO KF & LF FLNGES FLNGES & FITTINGS ISO-KF (Klein ) and LF (Large ) flanges are part of the same family of ISO standard elastomer sealed vacuum components. LewVac ISO flanges
More informationVacuum Components C A T A L O G
Vacuum Components C A T A L O G 1 Contents 1 Vacuum valves Angle Valves - 4 Inline Valves - 10 Butterfly & Check Valves - 14 2 s & Fittings Elastomer Seal ISO-KF - 18 Elastomer Seal ISO-LF - 34 Metal Seal
More informationGenesis Modular Valves
3SETION 3.5 SPEIFITIONS Port Os: 3 /4 to 2 inches. Larger sizes and metric tubing diameters available on request Mating flange s: NW -16 through 5 standard ir fittings: 5 /32 inch One-Touch Materials ody:
More informationIsolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
More informationIntegrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 76 ISO-Universal fittings Sizes to 0 (2½'' to 25'') Series 76 ISO-Universal components are a vacuum flanging system for 63 mm to 1000 mm
More informationA&N CORPORATION High Vacuum Manufacturers Since 1965 TRI-SEAL
&N ORPORTION High Vacuum Manufacturers Since 1965 TRI-SEL T L O G VUUM TEHNOLOGY DISTRIUTION TRI-SEL FLNGE SYSTEM Page INTRODUTION...1-2 LMPS: HINGED QUIK LMP TYPE 3/4" - 2" luminum - Elastomer Seal Only...3
More informationIsolation Valves. 3.1 General Information N-Series Valves Poppet Valves Ball Valves Genesis Valves & Fittings 20
Isolation Valves Section Three 3 3.1 General Information 2 3.2 N-Series Valves 4 3.3 Poppet Valves 6 3.4 all Valves 18 3.5 Genesis Valves & Fittings 20 3.6 Manual utterfly Valves 27 3.7 Pendulum Valves
More informationAGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationIntegrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationVacuum Fittings and Feedthroughs
Vacuum Fittings and Feedthroughs CONTENTS Introduction...3 Company History...3 PRODUCTS...4 QUALITY.AND.SERVICE...6 Product Listings KF.FLANGES.AND.FABRICATIONS...7 ISO.FLANGES.AND.FABRICATIONS... 25 CF.FLANGES.AND.FABRICATIONS...41
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationValve Solutions Series 150/160 and V-100 Valves
w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body
More informationSingle-Seat Valves For the Sanitary Industries
www.swagelok.com Single-Seat s For the Sanitary Industries Stainless steel construction Shutoff, divert, modulating, and specialty valves 1/2 to 4 sizes Kwik-lamp and tube butt weld end connections 3-
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationOptional Features and Accessories
Optional Features and ccessories Million Cycle Valves Vacuum Research Valves have been designed to eliminate sliding friction to extend operating life and reduce particle generation. For example, all of
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationISO Wafer Check Valves. Full Port Lowest Pressure Drop. Maximizing the Flow
ISO 9001-2008 Wafer Check Valves Full Port Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port Wafer Check Valves provide more
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationFittings and Tubing QS Series
Fittings and Tubing QS Series Medium Since 1945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned
More informationQBV SERIES Butterfly Valves
QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, ittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationBellows-Sealed Valves
www.swagelok.com ellows-sealed Valves Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections rass, stainless steel, and
More information11.2 SPECIAL SERIES FLANGES 316LN STAINLESS STEEL -> Page 11.5
- HARDWARE. STANDARD FLANGES L STAINLESS STEEL -> Page. Fixed blank Flange- Fixed weld Flange- Fixed blank Flange tapped metric- Fixed weld Flange tapped metric- Rotatable blank Flange- Rotatable weld
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker utoclave Engineers: Fluid omponents Product February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since
More information12.2 KF FITTINGS -> Page 12.3
Vacuum HARDWARE. CLAMPS AND CENTRING RINGS -> Page. Clamps- Standard Aluminium type with Wingnut Clamps-QUICKclampswithleveraction Centring Ring- ALUMINIUM with VITON O-Ring Centring Ring- Stainless Steel
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationAll-metal angle valve Series 57
ll-metal angle valve Series 57 Main applications For vacuum processes with extreme UHV requirements and / or when using aggressive media Ordering information Valve with manual actuator hexagon head Valve
More informationWARNING. Before the exhaust silencer is fitted to the pump, the pump must be secured as describe in the pump manual. WARNING
5 Exhaust silencer WARNING Before the exhaust silencer is fitted to the pump, the pump must be secured as describe in the pump manual. WARNING The exhaust silencer must be removed from the pump before
More informationCABLE TRAY SURFACE RACEWAY J-HOOKS IN-FLOOR SYSTEMS POWER POLES DESK PEDESTALS CHANNEL TRAY
LE TY SUFE EWY J-HOOKS IN-FLOO SYSTEMS POWE POLES DESK PEDESTLS HNNEL TY hannel Tray from MonoSystems MTEIL LENGTH ft. m () HNNEL () HNNEL () HNNEL For 5-years MonoSystems has been creating innovative
More informationSMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc opyright 2008 Selkirk orp. Saf-T
More informationCART -AWAY CUBE (NATO) Cart-Away Concrete Systems. Table of Contents. Conveyor Drive Motor See Section Conveyor See Section 1-1
Table of ontents RT -WY art-way oncrete Systems UE (NTO) Parts atalog ustomer Service Hot Line onveyor See Section - onveyor rive Motor See Section 6- ccess Limiting Panels See OPT iverter See Section
More informationCircular Manways. There is an array of different lid designs, hinge positions and sealing arrangements, to suit your application.
ircular Manways lchem Process offers a comprehensive range of circular manways, hatches and doors. vailable for both atmospheric and pressurised applications, the manways are available in 316 and 304 stainless
More informationTubing, Fittings and Air Handling System Components
Tubing, Fittings and ir Handling System omponents INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services
More informationSecurity device Non return valve
Non return valve Design The DEFINOX non-return valve is made of 316L stainless steel with a surface finish of Ra = 0.8 µm. To disassemble, a fitting is required upstream. This valve uses a guided plug
More informationBe llows-se aled Valve s
www.swagelok.com Be llows-se aled s B Working pressures up to 1000 psig (68.9 bar) Temperatures up to 900 F (482 C) 1/4, 3/8, 1/2, and 3/4 in.; 6, 10, and 12 mm end connections Brass, stainless steel,
More informationOPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 7/11 rev. 1
OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company 7/11 rev. 1 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200 F Buna-N -12.2
More informationVacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
More informationNEMA CLAMPS JIC PANEL MOUNTING WELDNUT "JIC" STYLE COVER CLAMPS "JIC" STYLE CLAMP BRACKETS
NEM LMPS JI PNEL MOUNTING WELDNUT "JI" STYLE OVER LMPS Plated Steel T304 Stainless Steel T316 Stainless Steel "JI" OVER LMP SSEMLY pplication "JI" FabTech's Style "JI" over Style lamp over is attached
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More informationPIPE SYSTEM TECHNICAL DATA
PIPE SYSTEM TECHNICA DATA Information The Alvenius standard product range is approved according to PED 97/23/EC. The PED approval has been integrated with the certified Quality Management System. t Outside
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationGateKeeper Aluminum Gate Valves
GateKeeper Aluminum Gate Valves 250 mm Air-Operated 100 mm Air-Operated 63 mm Air-Operated The GateKeeper Series Aluminum Gate Valves are economical, reliable vacuum shut-off devices designed and manufactured
More informationF low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
More informationREPAIR PARTS LIST 31
LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"
More informationconnected to innovation
connected to innovation OMPRESSED IR NETWORKS, MPS ONEPT The MPS range MPS is a simple and reliable aluminium profile connection system for the installation of compressed air distribution networks. MPS
More informationWeatherproof grilles
Weatherproof grilles Weatherproof grilles PPLITION Weatherproof grilles prevent rainwater from entering inlets and outlets in building façades either as part of an HV system or for natural ventilation
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationThe world is movement
The world is movement 06 VL GROXS HRTR ROOTS N RT ROOTS WITH MTHY. VI HNSON ROOTIS N RTIIIL INTLLIGN SIGNR N RSRHR VL GROXS Sizes There are different bevel gearbox placement options on all the different
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationSample Transfer & Manipulation
Sample Transfer & Manipulation Section Nine.1 General Information 2.2 Sample Transfer System & Load Lock Chamber 4.3 dd--doors 5.4 Manipulators, Stages & Translators 6.5 Utility Hat & lignment Gimbals
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationOptionAll Batching Pigs
Optionll atching Pigs Sizes: 4- through 14-inch ulletin No: 3030.004.04 Date: January 2007 ross Indexing No: n/a Supersedes: 3030.004.03 (2/06) Description TDW's Optionll atching Pigs can be assembled
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange lvd Grand
More informationVCR Metal Gasket Face Seal Fittings
lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationG-RANGE PIPE CONNECTIONS
G-RANGE PIPE ONNETIONS G-RANGE PIPE ONNETIONS Designed to meet the requirements of plant operators. Due to their efficiency, lightness and reliability, together with extreme qualities of leak tightness,
More informationBellows-sealed Valves
ellows-sealed Valves ellows-sealed Valves V-64 SVH Series High Pressure ellows-sealed Valves Features Packless valves with all-metal seal to atmosphere ompact designed body with minimal dead space 16 SS
More informationKC Transmission Overhaul
KC Transmissions Overhaul Instructions Form No. F-1031 Section 4310 Issue Date Rev. Date 02/08/96 12/30/15 Table of Contents Disassembling.............................. 1 Driven Shaft.................................
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationEmergency Shear Valves
Emergency Shear Valves 0060 Underpump Emergency Valve The Emco Wheaton 0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually
More informationFittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationCable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationSeries TSB7 Ball Valve
Series TS7 all Valve leanflow TM TS7 all Valves are engineered to be a true process piping component to specifically meet the demanding processes found in the pharmaceutical and food & beverage industries.
More informationEISELE LIQUIDLINE PROGRAM CONNECTIONS FOR COOLING WATER
PROGRAM CONNECTIONS FOR COOLING WATER QUALITY SOLUTIONS MADE BY EISELE LIQUID 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents, more than 3,500 standard articles,
More informationBASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More information316 Series Engine Driven DESCRIPTION MAINTENANCE SHIM ADJUSTMENT. Specifications Information and Repair Parts Manual
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More information83000 All Aluminum Gate Valves
All Aluminum Gate Valves Table of Contents Introduction... Page 120... Page 121 Model Key Guide... Page 122 1.5" ID (DN40mm)... Page 123 2.0" ID (DN50mm)... Page 124 2.5" ID (DN63mm)... Page 125 3.0" ID
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More informationISO 9001:2008
DOOR Dutch, Heavy Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the bottom
More informationChannel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
More informationMIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More informationContents. EasyLine EFK MultiLine EFK 14. MultiLine EFK MultiLine EFK MultiLine EFK 35. MultiLine EFK page 201.
Contents Cable drag chain systems open EasyLine EFK 10.1 page 201 MultiLine EFK 14 page 206 MultiLine EFK 18.1 page 210 MultiLine EFK 18.2 page 214 MultiLine EFK 35 page 218 MultiLine EFK 3000 page 224
More informationPUSH PULL DEVICES. Section 03. Introduction to Push Pull Devices 044. Magnetically-coupled devices. MPPRL - Rotary and Linear Motion 046
Section PUSH PULL DEVICES Introduction to Push Pull Devices 044 Magnetically-coupled devices MPPRL - Rotary and Linear Motion 046 MPPL - Linear Guided Motion 048 MPP - Linear Unguided Motion 050 Edge-welded
More information800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
More informationGroup 6. 10K High Pressure Fittings Tubing Nipples Adaptors
Group 0K High Pressure Fittings Tubing Nipples Adaptors INEX Page ontents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JI-JI, JI - NPT 5 X-Overs - HP Fittings / Male Threads -8 High Pressure Fitting and
More informationSection A Busway
Section 8 800 5000 usway usway atalog Numbering System Section 8 800 5000 usway usway atalog Numbering System atalog numbers are composed of two basic parts the prefix (as below), plus the suffix of each
More informationModel VSI-I & VSI-II Positive Pressure Venting Systems
C O M M E R C I A L A N D I N D U S T R I A L V E N T I N G Model VSI-I & VSI-II Positive Pressure Venting Systems Ideal for discharging exhaust gases and fumes from boilers, heaters, ovens, engines, turbines
More informationUHV gate valve Series 10
UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange lvd Grand
More informationHigh Pressure Valves, Fittings and Tubing Pressures to 65,000 psi (4,500 bar)
igh Pressure Valves, ittings and Tubing Pressures to psi (4,00 bar) MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More informationCF Components. Introduction. Functional principle 1-45
Introduction The generation of ultra high vacuum (UHV) makes great demands on the material and on the connections. Therefore the CF standard was created in the UHV technology (ISO 3669; enhancement ISO/TS
More information