IDF / ISS Hygienic Union BS 4825 Part 4

Size: px

Start display at page:

Download "IDF / ISS Hygienic Union BS 4825 Part 4"

Linda Lang
5 years ago
Views:

IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960.

1 IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in This hexagonal screwed union is more commonly referred to as an IDF fitting and is suitable for use in fixed pipework where little dismantling is required. The wetted parts are supplied in 316 stainless steel and the nuts in 304 SS. The union has a crevice free construction where a T shaped seal fits flush with the tube s bore. The fitting is now covered by the standards S 4825 Part 4 and ISO Designed to operate up to a maximum working pressure of 16 ar (1.6 Mpa) at ambient temperature. Size range: Imperial tube 1 to 4. Seal Materials: Nitrile, EPDM & FKM. ccessories: onical Strainers lank Nuts and hains IDF Spanner Pipe lips and U olts Fabricated ends, Tees and Manifolds Filters, Screens and Sampling Equipment Full range of utterfly Valves, all Valves, Pressure Relief and Non-Return. ssociated Standards: S 4825 Part 4 - IDF / ISS Hygienic Stainless Steel ouplings for Food pplications ISO ISS / IDF Hygienic Stainless Steel ouplings for Food pplications S 4825 Part 1 - Stainless Steel Tube for Food Industry pplications S 4825 Part 2 - Stainless Steel ends and Tees for the Food Industry STM Stainless Steel Tube for Sanitary, Dairy and Food Ind. STM Stainless Steel Tubes for General Duties DIN Hygienic Fittings, Metric DIN Hygienic Tube, Metric DIN septic Fittings, Flange, lamp & Union DIN Pharmaceutical Tube, Metric SME PE - Pharmaceutical Tube, Imperial ISO Stainless Steel Tubes for the Food Industry ISO Stainless Steel Tubes ISO Stainless Steel ends and Tees for the Food Industry SMS Stainless Steel Tubes SMS Stainless Steel Tubes DS IDF V1.4 Page No: 1

2 IDF Weld Male D Size D 316L ½ ½ S S 4 ISO ISO ISO IDF Weld Liner Machined D Size D 316L ½ ½ S S 4 ISO ISO ISO DS IDF V1.4 Page No: 2

IDF Liner lank - 316 Size 1 33.8 29.2 7.0 4066-026 1.½ 47.0 42.7 7.0 4066-038 2 60.5 56.2 7.0 4066-051 2.½ 74.0 69.9 7.0 4066-064 3 87.5 82.6 7.0 4066-076 4 120.6 111.1 7.

3 IDF Liner lank Size ½ ½ * *Please note that there are 2 standards for the 4 Liner. IDF lank Nut & hain Size ½ ½ * *Please note that there are 2 standards for the 4 Nuts. IDF Nut (Hexagon) Size ½ ½ * *Please note that there are 2 standards for the 4 Nuts. IDF Seals Type profile olour lack lack lack Size (Nitrile) (FKM) (EPDM) N V E026 1.½ N V E N V E051 2.½ N V E N V E N102* 4031-V102* 4031-E102* Other material available: T - PTFE Type profile (white). *Two sizes are available at 4. Please confirm at time of enquiry. DS IDF V1.4 Page No: 3

4 IDF Round Slotted Nut Size ½ ½ IDF Spanner luminium Size (/F) P ½ P P ½ P P P-1102 DS IDF V1.4 Page No: 4

5 IDF Hinged Pipe lip - ½ SP oss Size ½ Q-013 ¾ Q Q ½ Q Q ½ Q Q Q-102 DS IDF V1.4 Page No: 5

6 IDF Eccentric Reducer M/F Size 1.½ ½ ½ -1.½ ½ ½ ½ IDF oncentric Reducer M/F Size 1.½ ½ ½ -1.½ ½ ½ ½ DS IDF V1.4 Page No: 6

7 IDF Equal Tee MFF branch 316L Size P-026-MFF 1.½ P-038-MFF P-051-MFF 2.½ P-064-MFF P-076-MFF P-102-MFF *Note: vailable in Variations, Please state which IDF End connectors you require either Male or Female. IDF 45 end - M/F Size ½ ½ *Note: vailable in Variations, Please state which IDF End connectors you require either Male or Female. DS IDF V1.4 Page No: 7

8 IDF 90 end - M/F Size ½ ½ *Note: vailable in Variations, Please state which IDF End connectors you require either Male or Female. IDF Female Hoseliner Size K ½ K K ½ K K K-102 *Note: This is a Non stock item and would usually be made to order. Please double check the length if this is a critical dimension. DS IDF V1.4 Page No: 8

9 IDF Male Hosetail Size L ½ L L ½ L L L-102 *Note: This is a Non stock item and would usually be made to order. Please double check the length if this is a critical dimension. DS IDF V1.4 Page No: 9

SMS Swedish Standard Union

SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework