F250D/F251D HYGIENIC BUTTERFLY VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) DOUBLE BLOCK AND BLEED STYLE BUTTERFLY VALVES
|
|
- Elinor Baldwin
- 5 years ago
- Views:
Transcription
1 PENTAIR HYGIENIC PROCESS VAVES (FORMERY KEYSTONE) F250D/F251D HYGIENIC BUTTERFY VAVES DOUBE BOCK AND BEED STYE BUTTERFY VAVES FOOD & BEVERAGE PROCESS SOUTIONS PROCESS VAVE TECHNOOGY
2 PENTAIR HYGIENIC PROCESS VAVES (Formerly Keystone) HYGIENIC BUTTERFY VAVES DOUBE BOCK AND BEED (DBB) STYE The F250D and 251D DBB valves are used for in-line safe separation of incompatible fluids. GENERA APPICATIONS TECHNICA DATA FEATURES CIP/process separation Non-compatible fluid separation Seat integrity monitoring Typical industries Dairies Breweries Wineries Food processing Pharmaceutical Chemical Sizes: DN 25 to DN 150 (Inch OD 1.0 to 6.0 ) Max product 1000kPa (10bar) pressure at 20 C: Rec. working 600 kpa (6 bar) pressure at 20 C: Min. product Full vacuum pressure at 20 C: Temperature -10 C to 95 C range: End connections: BW, clamp, RJT, wafer flange, others on request PENTAIR proven valve and actuator technology Failsafe pneumatic interlocks Fully machined 316 or 304 stainless steel body inkage driven, with only one actuator required inkage safety guard fitted as standard Overlapping discs to minimize leakage cavity volume on larger sizes Travel limited actuator to stop disc contact on larger sizes Full range of seats materials available Optional end connections Full range of optional accessories F250D for inch OD tubing F251D for metric tubing 2
3 PENTAIR HYGIENIC BUTTERFY VAVES F250D/251D DOUBE BOCK AND BEED STYE (DBB) OPERATING PRINCIPE The PENTAIR F250D double block and bleed butterfly valve consists of two sets of standard F250 butterfly valve components arranged in series, within a single integral valve body, to provide an inline separation cavity when both valves are in the closed position. This inline separation of products is used to isolate non-compatible fluids (i.e. CIP/product.) The separation cavity has two pneumatically interlocked poppet valves, tangentially opposed to provide for the introduction and draining of CIP or flushing liquids. Their position provides for a turbulent circular washing action plus facilitates a drain to atmosphere should either of the separate valve seats fail. The valve s twin discs are connected by a linkage arrangement to the pneumatic actuator that simultaneously operates the pneumatic poppet valves. NOTE Sectional view Vent/CIP Drain PARTS IST No. Description Material Standard 1 Body spacer 316, 304 Stainless Steel ASTM A276 2 CIP piston PTFE Commercial 3 Nut and ferrule 316, 304 Stainless Steel ASTM A276 4 Spring 302 Stainless Steel ASTM A313 5 CIP valve body 316, 304 Stainless Steel ASTM A276 6 CIP valve cylinder 316, 304 Stainless Steel ASTM A276 7 O-ring NBR 8 O-ring FKM 9 Air fittings NP bronze 10 Valve body 316, 304 Stainless Steel ASTM A Disc 316 Stainless Steel ASTM A Arm driven 304 Stainless Steel ASTM A Arm driving 304 Stainless Steel ASTM A Arm linkage 304 Stainless Steel ASTM A Mounting bracket 304 Stainless Steel ASTM A Seat VMQ (white) FDA EPDM (black) NBR (black) FKM (red) 17 Guard assembly 304 Stainless Steel ASTM A276 3 FDA FDA FDA 14 12, 13 HYGIENIC BUTTERFY VAVES 3
4 PENTAIR HYGIENIC BUTTERFY VAVES F250D/251D DOUBE BOCK AND BEED STYE (DBB) ØACT H H2 H3 H1 ID OD H NOTE F250D with F257 actuator and control head F250D WITH F257 ACTUATOR DIMENSIONS (mm) DN Inch OD (B/W) (Clamp) (BSM) H H1 H2 H3 H4 OD ID ØACT " " " " " " F251D WITH F257 ACTUATOR DIMENSIONS (mm) DN Metric (B/W) (Clamp) H H1 H2 H3 H4 OD ID ØACT
5 PENTAIR HYGIENIC BUTTERFY VAVES F250D/251D DOUBE BOCK AND BEED STYE (DBB) H4 H H2 ØD ID H1 H3 NOTES F250D with MRP/Premiair actuator F79U/E option also available F250D WITH MRP/F79U ACTUATOR DIMENSIONS (mm) DN Inch OD (BW) (Clamp) (BSM) H H1 H2 H3 H4 OD ID 125* 5.0" ** 5.0" * 6.0" ** 6.0" F251D WITH MRP/F79U ACTUATOR DIMENSIONS (mm) DN Metric (BW) (Clamp) (BSM) H H1 H2 H3 H4 OD ID 125* ** * ** NOTES * Dims with MRP/Premiair actuators ** Dims with F79U/E actuators HYGIENIC BUTTERFY VAVES 5
6 PENTAIR HYGIENIC BUTTERFY VAVES F250D/251D DOUBE BOCK AND BEED STYE SEECTION GUIDE Example: 050 F250D 255 CP/RJT 398 Metric Inch OD mm mm mm mm mm mm mm mm mm 6.0 Figure F250D Double block and bleed for inch OD tubing F251D Double block and bleed for metric tubing Trim Seat Body Disc Bearing 255 EPDM PVDF 256 VMQ PVDF 252 NBR PVDF 258 FKM PVDF 259 FKM PVDF 262 EPDM PVDF 263 VMQ PVDF 253 NBR PVDF End connections Weld ends Thread ends BW Butt weld (Std.) DIN DIN thread (fabricated) BWD Butt weld DIN tube RJF RJT male part (fabricated) RJT RJT male part (machined) SMS SMS male part, external thread 6 TPI Clamp ends CP Clamp (machined) CF ISO clamp ends (fabricated) Extended definer NB Double block and bleed with no bleed F257 Supplied c/w F257, drive stem and mount brackets for valve rated actuator F79U Supplied c/w F79U drive stem and mount brackets for valve rated actuator (no actuator supplied) PENTAIR FOW CONTRO PACIFIC PTY TD KAIMIRO STREET, PUKETE INDUSTRIA ESTATE, HAMITON, 3200, NEW ZEAAND PACIFICNZHYGIENICSAES@PENTAIR.COM All Pentair trademarks and logos are owned by Pentair. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. EBPJV-0781 E-14/ Pentair - All Rights Reserved.
KEYSTONE FIGURE 250D AND 251D HYGIENIC PRODUCTS
Double block and bleed style stainless steel butterfly valves F250D for imperial tubing F251D for metric tubing FEATURES Keystone proven valve and actuator technology Failsafe pneumatic interlocks Fully
More informationDouble block and bleed style stainless steel butterfly valve sizes 1" to 6" [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing
Features Keystone proven valve and actuator technology. Failsafe pneumatic interlocks. Fully machined 316L or 304L stainless steel body. Linkage driven, with only one actuator required. Linkage safety
More informationF269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE)
PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS
More informationF267J+ / F268J+ HYGIENIC SINGLE SEAT VALVES PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) REVERSIBLE ACTUATOR TYPE
PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F267J+ / F268J+ HYGIENIC REVERSIBLE ACTUATOR TYPE FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS VALVES (Formerly
More informationThe figure 269J is a double seal mix-proof piston valve, used for product isolation, where safe separation of process and C.I.P. fluids is required.
The figure 269J is a double seal mix-proof piston valve, used for product isolation, where safe separation of process and C.I.P. fluids is required. Features Product contact parts manufactured from high
More informationKEYSTONE. Hygienic butterfly valves model F250 & F251 Installation & Maintenance Instructions. 1 Contents 1 Contents 1
Installation & Maintenance Instructions KEYSTONE 1 Contents 1 Contents 1 2 Introduction 1 2.1 Valve use 1 2.2. Application area 1 2.3. Incorrect use 1 3. Safety 2 4. Transport and storage 2 5. Installation
More informationHovap series 8700 Hygienic Mixproof Process Valves Varioflow
A pneumatically operated, double seated, balanced mixproof process valve, EHEDG approved Features General application Varioflow is an advanced design of process valve offering unequalled double sealing
More informationKeystone Hygienic Products Figure 267J/268J (Reversible) Single Seal Piston Valves
The figure 267J and 268J valves are single seal piston valves, used to control process or C.I.P. fluids. F267J for isolating. F268J for diverting or converging flows. Features Product contact parts are
More informationT-smart Butterfly Valves. Made by GEA Tuchenhagen. GEA Mechanical Equipment / GEA Tuchenhagen
Liquids to Value T-smart Butterfly Valves Made by GEA Mechanical Equipment / T-smart Butterfly Valves For many years, butterfly valves have proven their worth in process plants with different types of
More informationHygienic Products Figure 267J/268J Single Seal Piston Valves
The figure 267J and 268J valves are single seal piston valves, used to control process or C.I.P. fluids. F267J for isolating. F268J for diverting or converging flows. Features Product contact parts are
More informationSÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.).
More informationHygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationBrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationSÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationSanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A
01 SANITARY PIPE FITTING Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A 02 FERRULE / UNION / PIPE HOLDER Ferrule End Cap Ferrule Clamp Ferrule Gasket
More informationButterfly Valves Slim Disc Design T3 (Wafer) and T4 (Lugged) Series
Butterfly Valves Slim Disc Design T3 (Wafer) and T4 (Lugged) Series 50-300mm size range Cartridge type replaceable seat 316 stainless steel disc Full vacuum to 16 bar pressure range Universal flange compatibility
More informationThe Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
More information2.2 T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE MODELO T 212-A.
VÁVUA BORBOETA REVESTIDA DE MODEO T 212-A Double flanged -ined butterfly valve for shut-off and control services in the chemical Industry. TECHNICA DATA Nominal diameter: Face-to-face: EN 558 Series 20
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More information2.1 T 211-A TECHNICAL DATA
-INED BUTTERFY VAVE T -A Fully -lined wafer type valve for corrosive and aggressive media. The patented shaft seal design ensures reliability even with high-corrosive applications. TECNICA DATA Nominal
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationKEYSTONE OPTISEAL WAFER AND LUGGED
A resilient seated butterfly valve for general purpose applications FEATURES GENERAL APPLICATION Food and beverage processing, dry bulk conveying, paper mills, slurry handling etc. Grease or silicone free
More informationTOP-FO Automated Flow Control Valves (3-A) Stainless Steel Flow Control Equipment for the Food, everage, Dairy, Cosmetics, Pharmaceutical, iotechnology, and Electronics Processing Industries www.toplineonline.com
More informationKeystone Butterfly valve ParaSeal range
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications Features General application Water, food and beverage processing,
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationThe ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
More informationKeystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationButterfly Valves T5 (Wafer) and T6 (Lugged) Series
Butterfly Valves T5 (Wafer) and T6 (Lugged) Series 50-600mm size range Cartridge type replaceable seat Full Vacuum to 16 bar pressure range (up to 300mm sizes) Universal flanging compatibility on wafer
More informationMark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves
Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials
More informationkythe Original Aseptic Seat Valve
. kythe Original Aseptic Seat Valve ky Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited for aseptic operating conditions
More informationSection G Series 77 High Purity Ball Valve Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com
More informationKeystone Butterfly Valve Figure 9
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
More informationKEYSTONE. The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions.
KEYSTONE The HiLok high performance butterfly valves offer efficient, bidirectional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck for insulation service.
More informationDELTA SWcip4.
APV valves DELTA SWcip4 Double Seal Valve SPX is highly committed to delivering sustainable solutions, which exceed customer expectations in value and return through a focus on. Waste prevention and loss
More informationKeystone CompoSeal Resilient Seated Butterfly Valves Wafer style Sizes DN PN 10/16
Wafer style Sizes DN -3 PN /1 Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features Patented
More informationSecurity device Non return valve
Non return valve Design The DEFINOX non-return valve is made of 316L stainless steel with a surface finish of Ra = 0.8 µm. To disassemble, a fitting is required upstream. This valve uses a guided plug
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More information2.2 T212 PTFE-LINED BUTTERFLY VALVE TYP T 212 TECHNICAL DATA
-INED BUTTERFY VAVE TYP T 212 TECNICA DATA Nominal diameter: Face-to-face: EN 55 Series 20 ISO 5752 Series 20 API 09 Table 1 BS 5155, Tab. Series NF E 29-305.1 Flange accommodation: DIN 2501 PN 10/ ANSI
More informationSaunders Tee Body for Flow Diversion and Sampling Applications
Saunders Tee ody for Flow Diversion and Sampling Applications The Saunders Tee ody combines a valve body and tee fitting in a single design manufactured from a single billet. This results in a valve body
More informationKeystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features General application
More informationYARWAY FLOAT TRAPS SERIES 23000, 26000, 33000
SERIES 23000, 26000, 33000 Series 23000 and 26000 for steam-using equipment, supporting high-volume drain discharge. Series 33000 for air and gas, achieving energy conservation through rapid drain discharge.
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationDIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationKEYSTONE SERIES GR RESILIENT SEATED BUTTERFLY VALVES GRW/GRL
heavy duty industrial resilient seated butterfly valve GRW - Wafer body design GRL - Lugged body design FETURES GENERL PPLICTION Water, air, dry bulk conveying etc. These valves are for any service where
More informationProduct Range. Products for all industrial applications
Product Range Products for all industrial applications CONTROL VALVES BUTTERFLY VALVES Series Description Symbol Version Page Series Description Symbol Version Page 1a Globe Valve PTFE 4 10a Double Eccentric
More informationSMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
More informationKeystone Figure 9 Butterfly Valve
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
More informationPlain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationSection G TOP-FLO T4V Sanitary V-Port Control Ball Valves Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Pharmaceutical, Biotechnology, and Electronics Processing Industries
More informationkysimply Unique Regulating
. kysimply Unique Regulating Unique SPC-1 Regulating Valve General Information The Unique Series is an innovative new generation of AlfaLaval single seat valves that are designed to meet the highest process
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationARC Aseptic Remote-Controlled Valve with PTFE Diaphragm
ARC Aseptic Remote-Controlled Valve with PTFE Diaphragm PD 65143 GB5 21-1 Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More informationApplication Pressure reducing valves for the food and pharmaceutical industries
Series 2371 Pressure Regulators Pressure Reducing Valves for the food and pharmaceutical industries Type 2371-10 Pneumatic set point adjustment Type 2371-11 Manual set point adjustment Application Pressure
More informationVD SERIES VESSEL & REACTOR VALVES DISC VALVES
VD SERIES VESSEL & REACTOR VALVES DISC VALVES FULL FLOW BOTTOM OUTLET VALVES TANK BOTTOM DISC VALVE CODE: VD4R-VD6R M Ring for high temperature and vacuum. Other sealing systems are available Optional
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationkymanual or Automatic - it s your Choice
O TO E R 2008. kymanual or utomatic - it s your hoice lfa Laval LK utomatic or Manual utterfly Valve oncept LK is a hygienic automatically or manually operated butterfly valve for use in stainless steel
More informationSMS DIN spojke. Food DIN / SMS Couplings. procesna oprema
procesna oprema aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding SMS DIN spojke Food DIN / SMS Couplings SMS FOOD COUPLINGS
More informationAdvanced PE Single Wall Piping System
Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 Between flanges PN10/16-10 C +80 C in NBR, 110 C in EPDM, 180 C in FKM Max Pressure : 16 Bars up to DN200 ( 10 bars over ) Specifications
More informationSMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm
PD 6544 GB1 9911 SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm Application SMP-BCA is an aseptic double seat valve with PTFE diaphragm. It is available as a stop- or divert valve. The valve is suited
More informationYarway Narvik Model 37 and 47 Cryogenic injector
Cryogenic injector for LNG applications Features Fabricated construction High quality stuffing box with PTFE Chevron rings Variable nozzle type Wide range of K v (C v ) available Special nozzle combinations
More informationIN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
More informationHygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS
Hygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS Process Equipment GEA Tuchenhagen GEA Tuchenhagen -VARIFLOW Series TPS The hygienic self-priming GEA Tuchenhagen -VARIFLOW TPS
More informationkysimply Unique Single Seat
. kysimply Unique Single Seat Unique SSV Tangential General Information The Unique Single Seat Valve is an innovative new generation that are designed to meet the highest process demands of hygiene and
More informationWEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
More informationType Pneumatic Control Valve Type 3525 Globe Valve
Type 355-1 Pneumatic Control Valve Type 355 Globe Valve Application Dump valve designed for use in high-pressure on/off applications in upstream oil and gas production. Valve size NPS 1 to 3 Pressure rating
More informationKEYSTONE FIGURE 9 BUTTERFLY VALVE
A resilient seated butterfly valve for general purpose applications FEATURES Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
More informationKeystone resilient seated butterfly valves Figure 221 and 222
Figure 221 and 222 An economical bonded resilient seated butterfly valve for bi-directional and end-of-line service F221 Wafer style valve F222 Lugged style valve Features Bubble tight shut-off at full
More informationBALL valve FLOATING BALL VALVE
BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range
More informationkyalfa Laval Unique DV-ST UltraPure
kyalfa Laval Unique DV-ST UltraPure Simply Unique Diaphragm Valves Concept The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation The valve consist of a
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
More informationID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationVALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationDIN /DIN Aseptic Screwed Union for ISO 1127 Schedule Pipe
/ Aseptic Screwed Union for ISO 1127 Schedule Pipe / Aseptic Screwed Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationSpare Parts. SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB
Spare Parts SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB2 2002-11 Type SMP-BCA - Stop Valve 2 Reg.: 9805 Intro.: 8605 Type SMP-BCA - Stop Valve 38mm 51mm 63.5mm 76mm 101.6mm Pos. Qty.
More informationPROCESS EQUIPMENT COMPANY. Manufactured by: Group Defontaine Saint Herblain Cedex, France.
PROCESS EQUIPMENT COMPANY Manufactured by: Group Defontaine Saint Herblain Cedex, France www.toplineonline.com Summary Shut Off and Divert Valves Body Designs, Characteristics...1 Performance Curves, Dimensions...2-3
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationkysmall, Yet Flexible
. kysmall, Yet Flexible ky Application Alfa Laval s Tri-Clover brand range of fractional valves has been designed for applications requiring a secure, sanitary or sterile environment within the food, beverage,
More informationFOOD COUPLINGS DIN 11851
FOOD COUPLINGS DIN 11851 B.3. STANDARD Food couplings complying with DIN 11851 are used in the food, chemical and pharmaceutical industries to connect rubber food hoses and stainless steel pipes (in compliance
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationAir operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More information