SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS

Transcription

1 SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS

2 SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.). These pumps are suitable for liquids with viscosity up to 500 mpa.s. FEATURES TECHNICAL DATA MATERIALS Standard electric motors available Available in accordance with ATEX CE Ex IIG c T3/T4 Standard mechanical seals acc. EN available Hygienic construction Favorable NPSH Low noise Easy and low cost maintenance High efficiency and capacities up to 200 m 3 /h and discharge pressures up to 13 bar Suitable for CIP Wide variety on available options such as heating jackets, frequency controllers, flushed seal, etc. Available with unions, plane ends or flanges Designed and certified in accordance with EHEDG recommendations Product friendly treatment Inspection certificate «type 3.1» according to DIN EN10204 available on request Motors 0.75 kw up to 55 kw Temperature 140 C Higher temperature seals on request Connections standard male part acc. DIN Other connections SMS, RJT, BS, Tri-clamp DIN (EHEDG), IDF or flange can be provided According European Directive 1935/2004 Wetted parts (AISI 316 L) Other parts (AISI 304) Seals Mechanical CS-SiC, SiC-SiC Elastomers NBR, FKM, EPDM, PTFE Other seal materials on request Double mechanic seals and flushed mechanic seals available FDA licensed 2

3 SEAL CONFIGURATIONS Single working internal mechanical seal Double working internal mechanical seal with quench (unpressurized cooling liquid) Single working external mechanical seal Double working external mechanical seal back to back (pressurized cooling liquid) HYGIENIC PUMPS 3

4 HP SERIES Application Designed for applications where high demands for smooth product handling and continuous operation are required. G M B D2 E1 ±10 D1 A L Standard 3A E2 ±10 K C H1/H2 J1/J2 F E1 E2 H1/J1 H2/J2 Standard 3A Single acting mechanical seal Double acting mechanical seal OVERALL DIMENSIONS Motor IEC Motor kw E1 E2 F G H1 H2 J1 J2 K L / / S L L S 5.5 / M M 11 / L M L 30 / S OVERALL DIMENSIONS D1 D2 Pump OD-Tube Metric OD-Tube Metric A B C M HP HP HP HP HP HP HP HP HP HP HP HP HP HP HP HP

5 HP SERIES Design The HP pump range is a solid stainless steel construction to meet the stringent international regulations in the various fields of hygienic requirements offering: Open impeller design Favorable NPSH EHEDG APPROVED According ATEX CE Ex IIG c T3 Duty Discharge pressure Up to 90 m Flow rates Up to 130 m 3 /hour Temperatures Maximum 140 C Higher temperatures on request Impeller HP Series - Polished 1500 RPM 3000 RPM 1800 RPM 3600 RPM HYGIENIC PUMPS 5

6 HP-Z SERIES Application The design is suitable for CIP and scavenge applications. Additionally the pump can be applied on venting of suction lines and the handling of entrained air. D2 M L A D1 K E1 ±10 C H1/ H2 Standard J F 3A E2 ±10 E1 E2 H1 H2 Standard 3A Single acting mechanical seal Double acting mechanical seal OVERALL DIMENSIONS Motor Motor IEC kw E1 E2 F G H1 H2 J K L / / / / / 7.5 / / 356 / / 15 / / 477 / / S OVERALL DIMENSIONS D1 D2 Pump OD-Tube Metric OD-Tube Metric A B C M N HP-Z HP-Z HP-Z HP-Z HP-Z

7 HP-Z SERIES Design The HP-Z self priming pump is specifically designed for handling entrained air at high capacities. The impeller is of open construction and all wetted parts are constructed with stainless steel (DIN /316L). Duty Discharge pressure Up to 60 m Flow rates Up to 130 m 3 /hour Temperatures Maximum 140 C Higher temperatures on request Impeller HP-Z Series 1500 RPM 3000 RPM 1800 RPM 3600 RPM HYGIENIC PUMPS 7

8 ORDER FORM Designing pumps requires exact specifications, so thanks for giving us as much detailed information as possible. CUSTOMER DATA Customer Customer No. Address Phone Project Name/No. PUMP DATA Capacity [m³/h] Pump Head [mwc] Product Product Temperature [ C] Density [kg/m³] Viscosity [Pas] Kind of Application Pump Location on Site Site Elevation (Height above Sea Level) [m] Pump must be Self-Priming [yes/no] Port Connections (Standard: Metric DN SC Threaded Male) Voltage [V] Frequency [Hz] PTC Sensor Required [yes/no] Ex-Proof Required [yes/no] Ex-Proof Classification Trolley required [yes/no] Heating/Cooling Jacket Required [yes/no] Drain Required [yes/no] Shroud Required [yes/no] MECHANICAL SEAL AND GASKET MATERIALS Single (Standard) or Double Mechanical Seal If Single: Internal (Standard) or External Mech. Seal If Double: Buffer Liquid Pressureless or Pressurized Primary Seal Material: Carbon/SIC (Standard) / SIC/SIC / Others Secondary Seal Material: (if Case of Double Mech. Seal): Carbon/SIC (Standard) / SIC/SIC / Others Pump Gasket: EPDM (Standard) / FKM (Viton) / NBR You can either fax the form to: or send it via to: info.suedmo@pentair.com PENTAIR SÜDMO GMBH INDUSTRIESTRASSE 7, RIESBÜRG, GERMANY All Pentair trademarks and logos are owned by Pentair. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. ID-No.: Hyg. Centrifugal Pumps E-1/ Pentair - All Rights Reserved.