For High Pressure Applications
|
|
- Naomi Stevenson
- 6 years ago
- Views:
Transcription
1 For High Pressure pplications
2 SELEXCEL Swivels joints have been carefully designed and manufactured with continuous research and development backing to very close tolerances under rigid quality control procedures approved to ISO 9001:2000 quality management systems to meet the requirements of high pressure hydraulic applications, the swivel joints are generally used in various machines/industries such as, l Injection Molding l Pulp and Paper l Logging l Refuse Trucks l Utility Equipment l Mobile Equipment l Hose Reels l Pressure Washers l Machine Tools l Steel Mills l Palletizers etc. FETURES l Hardened bearing races for extended service life l Full Flow design minimizes pressure drop for optimum system performance. l Sealed bearing design isolated bearing race from media and environment. l Reduced bearing load design minimizes wear in the bearing race and extends services life. l PTFE back-up rings support primary seal for high-pressure applications. l Variety of seal option available. l vailable in Steel and Stainless Steel SS 316 Material. ENEFITS l Show no significant increase in torque with introduction of pressure l Fit in compact areas. l Prevent environmental contaminates from entering the swivel joints. l llow quick and reliable field repair. CONSTRUCTION OF SWIVEL JOINTS Cap Screw all earing O-Ring O-Ring ack-up Ring Shaft Housing 2 Dimensions are for reference only and are subject to change without notice
3 MTERIL OF CONSTRUCTION : Metal Parts l Carbon steel with Zinc plating : It is recommended for non-corrosive applications i.e., hydraulic, pneumatic etc. l Stainless Steel : It is recommended for applications i.e. water, chemicals, solvents etc. Sealing Parts Viton (Fluorocarbon) For petroleum based applications. flas (TetraFluoroethylene-Propylene Copolymer) form any individual chemicals. PTFE (Teflon ) : used as a back-up ring. Other seals such as Nitrile, Silicon, EPDM are available on request. OPERTING PRMETER TYPES vailable Size Pressure Rating Temperature Rating End Connections DESCRIPTION 1/4" to 1" Up to 5000 PSI. Up to 180 C (Depending on sealing material) l Female SPP x Female SPP l Male SPP x Female SPP l Female x Female l Male x Female l Male JIC 37 x Female l Male JIC 37 x Female JIC 37 l SE 'O' Ring Straight x Female l Male JIC 37 ulkhead x Female JIC 37 l Male JIC 37 ulkhead x Male JIC 37 l Male SE 'O' Ring straight thread x Male JIC 37 l Male x Male JIC 37 l Male JIC 37 x Male JIC 37 l Male SE 'O' Ring straight thread x Female JIC 37 P1 P2 /F-D /F-E Male pipe to Female pipe - (Inline Swivels) CONNECTION SIZE DIMENSIONS IN inch / mm P1 1/4-18 3/8-18 1/2-14 3/ ½ P2 1/4-18 3/8-18 1/2-14 3/ ½ 2.59" 65.8mm 2.66" 67.5mm 3.03" 76.8mm 3.10" 78.8mm 3.54" 89.8mm 1.60" 40.6mm 1.64" 41.7mm 1.79" 45.5mm 1.85" 47.0mm 2.11" 53.5mm /F-D " 19.0mm 1.12" 28.6mm 1.38" 35.0mm 1.62" 41.3mm /F-E 1.19" 30.2mm 1.625" 41.2mm 1.81" 46.0mm SELEXCEL SJO7-4N SJO7-6N SJO7-8N SJO7-12N SJO7-16N 3 Dimensions are for reference only and are subject to change without notice
4 P2 /F-F P2 /F-F C C /F-G P1 P1 /F-D /F-E /F-D /F-E 90 Swivels 90 Dual Plane Swivels Male pipe to Male 37 Flare (90 Swivels) CONNECTION SIZE P1 P2 1/4-18 7/16x20 3/8-18 9/16x18 1/2-14 3/4x16 3/ /16x ½ 1-5/16x " 72.3mm 3.05" 77.4mm 3.43" 87.0mm 3.66" 93.0mm 4.41" 112.0mm DIMENSIONS IN inch / mm 2.44" 62.0mm 2.54" 64.4mm 2.84" 72.0mm 3.00" 76.1mm 3.54" 90.0mm C 1.39" 35.2mm 1.44" 36.6mm 1.78" 45.1mm 2.24" 56.9mm 2.42" 61.3mm /F-D " 19.0mm 1.12" 28.6mm 1.38" 35.0mm 1.62" 41.3mm /F-E 1.19" 30.2mm 1.625" 41.2mm 1.81" 46.0mm /F-F 0.56" 14.3mm 0.69" 17.5mm SELEXCEL SJL21-4N-7N SJL21-6N-9N SJL21-8N-12N SJL21-12N-17N SJL21-16N-21N Male to Female (90 Dual Plane Swivels) CONNECTION SIZE P1 P2 1/4-18 1/4-18 3/8-18 3/8-18 1/2-14 1/2-14 3/4-14 3/ ½ 1-11 ½ 2.85" 72.3mm 3.05" 77.4mm 3.43" 87.0mm 3.66" 93.0mm 4.41" 112.0mm 2.44" 62.0mm 2.54" 64.4mm 2.84" 72.0mm 3.00" 76.1mm 3.54" 90.0mm DIMENSIONS IN inch / mm C 2.625" 66.7mm 2.74" 69.6mm 3.14" 79.8mm 3.44" 87.4mm 3.83" 97.3mm /F-D " 19.0mm 1.12" 28.6mm 1.38" 35.0mm 1.62" 41.3mm /F-E 1.19" 30.2mm 1.625" 41.2mm 1.81" 46.0mm /F-F 1.19" 30.2mm 1.625" 41.2mm 1.81" 46.0mm /F-G " 19.0mm 1.12" 28.6mm 1.38" 35.0mm 1.62" 41.3mm SELEXCEL DSJL07-4N DSJL07-6N DSJL07-8N DSJL07-12N DSJL07-16N 4 Dimensions are for reference only and are subject to change without notice
5 QUICK CONNECT COUPLINGS - Series 110 SELEXCEL Series 110 Double Shut-off Quick Connect Couplings are designed and manufactured for hydraulic applications suitable for Production Machineries, Construction Machineries and Equipments, Earth Moving Equipments and Rugged Mobile etc. This couplings are used in the fluid transfer lines to be connected and disconnected for maintenance or operation of the equipments. SELEXCEL series 110 Quick Connect Couplings are of the Industries interchange and interchangeable with ISO , series '' Couplings. MTERIL OF CONSTRUCTION l Carbon Steel with Zinc Plating l Nitrile 'O' ring are fitted as standard seals l Viton 'O' ring are available on request FETURES l Robust in Construction. l Easy for manual connection and disconnection without tools. l all Locking mechanism provides safe and reliable connections. l Captive valve seal ensures leak free sealing, minimize the seal washout or damage from high velocity Fluid acceleration. l Seal with PTFE back-up rings designed to ensure reliable and leak free sealing even in high pressure applications. PRODUCT RNGE ND OPERTING PRMETERS vailable Size : 1/8" to 1 Pressure Rating : Up to 5000 PSI Temperature Rating : Up to 110 C End Connections : vailable with, SPP, SPT etc. pipe threads. Female SP Coupling Series -110 SIZE 1/4" SP 3/8" SP 1/2" SP 3/4" SP 1" SP /F /F-C D DIMENSION IN mm/inch E F G H SELEXCEL QC-110-4G QC-110-6G QC-110-8G QC G QC G 5 Dimensions are for reference only and are subject to change without notice
6 QUICK CONNECT COUPLINGS - Series 210 SELEXCEL Series 210 Double Shut-off Quick Connect Couplings are designed and manufactured for variety of Hydraulic pplications. The main application of this Quick Connect Couplings are on the Fluid Transfer Lines for connection and disconnection during maintenance of the equipment without disrupting the operation and loss of fluids. To suit variety of heavy industrial applications which would typically include. l Chemicals and Pharmaceuticals l Machine Tool/utomation l Off Shore l Oil Refineries l Ship uilding l Steel Mills SELEXCEL Series 210 Quick Connect Couplings are of the industries interchange design and interchangeable with ISO Series '' couplings. MTERIL OF CONSTRUCTION vailable in Stainless Steel 316 l Viton 'O' Ring are fitted as standard seals FETURES l Robust in Construction. l High Flow Capacity. l Positive Valve stop. l Captive valve seal ensures leak free sealing, minimize the seal washout or damage from high velocity Fluid acceleration. l Seal with PTFE back- up rings designed to ensure reliable and leak free sealing even in high pressure application. l all Locking mechanism Provides safe and reliable connections. PRODUCT RNGE ND OPERTING PRMETERS vailable Size : 1/8" to 1 Pressure Rating : Up to 3500 PSI Temperature Rating : Up to 200 C End Connections : vailable with, SPP, SPT, Metric etc. pipe threads. Female SP Coupling Series -210 SIZE 1/8" SP 1/4" SP 3/8" SP 1/2" SP 3/4" SP 1" SP /F /F-C DIMENSION IN mm/inch D E F G H SELEXCEL QC-210-2G QC-210-4G QC-210-6G QC-210-8G QC G QC G 6
7 SELEXCEL Other Product Range Quick Exhaust Valves ar Stock ody Guage/ Root Valves ar Stock ody Needle Valves Manifold Valves Viton is a registered trade mark of Dupont company flas is a registered trade mark of ashi Glass Co. ltd. Teflon is a registered trade mark of Dupont Company 7
8 SELEXCEL SELEXCEL (INDI) PVT. LTD. Regd. Office & Unit-I : 56 & 61, Veena Dalvai Industrial Estate, S. V. Road, Oshiwara, Jogeshwari (W), mumbai India. Ph. (+91-22) , , Fax (+91-22) , sales@sealexcel.com Website : Unit-II : Plot No. 300/1&2, at Post - Mahi, Via Chhapi, Pirojpura - Mahi Road, Taluka - Vadgam, Dist - anaskantha, North - Gujarat Pin India Catalogue No. SC-0409
SERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
More informationInline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More information90 Dual Plane Swivels Switch Your Swivel!
90 Dual Plane Swivels Switch Your Swivel! HOW TO ODE STEM BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SEIES (THOUGH HOLE) THEAD SIZE MULTIPLES OF 100 FO N.P.T.F. MULTIPLES OF
More informationFlat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
More informationFAX: QUICK DISCONNECTS
Dry Disconnect Couplings Dry Disconnect Couplings Series 700D Series 600AN The Kamvalok dry disconnect coupling continues to be the standard of the industry. It provides automatic closure from both directions
More informationISO Wafer Check Valves. Full Port Lowest Pressure Drop. Maximizing the Flow
ISO 9001-2008 Wafer Check Valves Full Port Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port Wafer Check Valves provide more
More informationISO 9001 : Full Port Check Valves. Male NPT, Plain & Grooved End Lowest Pressure Drop. Maximizing the Flow
ISO 9001 : 2008 Full Port heck Valves Male NPT, Plain & Grooved End Lowest Pressure Drop Maximizing the Flow Full Port Lowest Pressure Drop Quick Delivery Full Port, Lowest Pressure Drop Full Port heck
More informationCost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications
PRODUCT SELECTION GUIDE Cost Effective, Reliable Quality Tube Fittings & Valves For Instrumentation, Hydraulic & Pneumatic Applications...Make the leak free connections with Sealexcel products at competitive
More informationIDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationSolution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
More informationSMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationOUR COMPLETE ACCESSORIES LINE INCLUDES:
is for Accessories When it comes to accessories, no one can match Reinflex s extensive stock of OEM grade adapters, ball valves, fittings, pressure gauges, and quick disconnects. Many of our adapters are
More informationSolution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
More informationSchrader Range. Pneumatic. Quick Acting Pneumatic Couplings Schrader original range InterCheck range Mini range Euro range. Catalogue 2167GB-ca
Pneumatic Schrader Range Quick cting Pneumatic Couplings Schrader original range InterCheck range Mini range Euro range Catalogue 2167G-ca Quick cting Couplers Overview Quick cting Couplers The self sealing
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationSERIES. CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) Description
CRYOGENIC/PRESSURE BUILD REGULATOR 3/8 and 1/2" NPT, BSPT Inlet 400 Psig (28 Bar) CR Description The Generant Series CR Cryogenic Regulator provides high flow during Cryogenic Vessel Pressure Build function
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More informationS, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available rass and 316 stainless steel
More informationASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
More informationCheck Valves. E Check Valves E-1. Quick Coupling Division 8145 Lewis Road Minneapolis, MN
Check Valves E-1 Check Valves Introduction Multiple Hydraulic System pplications Parker Check Valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage
More informationSECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationProducts for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
More informationD 25 POLYPROPYLENE (BOLTED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
More informationMicro Pneumatics Pvt. Ltd.
Micro Pneumatics Pvt. Ltd. A member of Group Reliability Efficiency Quality Company Profile Micro Pneumatics Private Limited founded in 1986 with clear vision of excellent quality, reliability and customer
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationDouble Block & Bleed Plug Valves
Double lock & leed Plug Valves D Plug Valves L&T Valves Limited, a wholly owned subsidiary of Larsen & Toubro, manufactures a comprehensive range of Double lock & leed Plug Valves in sizes up to 30 (750
More informationTechnical Description Can be used in hydraulic systems
Swivel Joints Swivel Joints G-Series Technical escription Can be used in hydraulic systems where rotating connections are essential, for example on accessories with rotating movements. epending on design,
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More informationHK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body
HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases, and vacuum.
More informationCipriani Harrison Valves Corp.
pplication Sanitary ball valves are used in stainless steel piping systems for isolation, either manually or automatically operated. The full port design with zero flow restriction makes it an optimum
More informationFAX: SPECIAL APPLICATION HOSES, METAL & TEFLON HOSES
Large Bore Teflon Fittings Selection Pipe Thread (NPT) Style 03 Flanges Lap Joint Flange Style 12 Shown with epoxy coated steel flange Cam and Groove Female Swivel Type Style 16 Also available Teflon Encapsulated
More informationPneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationHIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationAuto-Couplings. For Multiple Connection Systems. Auto-Couplings
Auto-Couplings For Multiple Connection Systems Auto-Couplings 2 Auto-Couplings For Multiple Connection Systems Minimized Down-Time The automation process going on in most industries requires more sophisticated
More informationNeedle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
More informationStainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationStainless Products, Inc.
Stainless Products, Inc. CAT. 2012-00 www.stainless-products.com Sanitary Air s & Butterfly s Stainless Products, Inc. 1649 72nd Avenue Somers, WI 53171 Ph: 800-558-9446 262-859-2826 Fax: 262-859-2871
More informationGeneral information on radial seals
170 General information on radial seals Radial seals is the common name for shaft seals, which seal against a rotating shaft using an elastic and resilient lip of rubber or PTFE. The lip in turn is either
More informationScrewed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
More informationISO 9001 : Dual Plate Wafer Check Valves. API 594 Design API 598 Tested. Maximizing the Flow
ISO 9001 : 2008 Dual Plate Wafer Check Valves API 594 Design API 598 Tested Maximizing the Flow Meets API/ANSI/ASME Specifications Quick Delivery Dual Plate Wafer Check Valves The Industry Standard Dual
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More information$3.00 U.S. quick disconnect couplings (Alternate Configurations)
$3.00 U.S. quick disconnect couplings (lternate Configurations) Our trained Quality ssurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More informationAnodized Aluminum Manifolds
nodized luminum Manifolds These manifolds can t rust, they resist corrosion and cost less! Made from heavy-wall aluminum extrusions, tested to 120 psi. Standard manifolds have 1" or 1¹ ₂" process water
More informationSeries PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More informationGeneral Engineering Spray Nozzles & Accessories
General Engineering Spray Nozzles & Accessories 3 GENERAL SPRAY NOZZLES & ACCESSORIES Clip On Spray Nozzles SWIVELING ANGLE ADJUSTMENT SPRAY CHARACTERISTICS : These nozzles simply clip over a pre-drilled
More informationNJK Series ISO Standard End-Suction Centrifugal Pumps
ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Right ngle Series... 6-9 Needle Valves SPN Series...10 338 Series...11 SP Series heck Valve...12 339
More informationToggle Valve s. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
www.swagelok.com Toggle Valve s OG,, and 92 Series Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials Features Compact, rugged design Opens
More information3 & 5 VALVE DIFFERENTIAL MANIFOLDS Pressures to 10,000 psi (690 bar)
3 & 5 VALVE DIFFERENTIAL MANIFOLDS Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards
More informationAN ISO 9001 : 2008 COMPANY SWING CHECK VALVE. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 COMPNY SWING CHECK VLVE Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TECH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 14 16 18 20
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationNEEDLE VALVE GAUGE VALVE VALVE MANIFOLD BALL VALVE ACCESSORIES
NEEDLE VLVE GUGE VLVE VLVE MNIFOLD BLL VLVE CCESSORIES Index Introduction ----------------------------- Valve Manifold VM0 ---------- Product Feature ----------------------- Valve Manifold VM0 ----------6
More informationToggle Valves. OG, 1G, and 92 Series. Manual and pneumatically actuated models. Straight, angle, and cross body patterns
Toggle Valves OG,, and 92 1 www.swagelok.com Toggle Valves OG,, and 92 Manual and pneumatically actuated models Straight, angle, and cross body patterns 316 SS and brass body materials 2 Needle and Metering
More informationCPV Manufacturing O-SEAL and Mark VIII Valves and Fittings
CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings January, 2017 503 Schoolhouse Road, Kennett Square, P: 215-386-6508 PA 19348 P: 215-386-6508 www.cpvmfg.com F: 215-387-9043 www.cpvmfg.com CPV
More informationThe Future in Motion. Hydraulics 2014 Quick Couplings.
The Future in Motion Hydraulics 2014 Quick Couplings www.contitech.us Quick Couplings 1 Quick Coupling Series Descriptions QS10 Series A general purpose, double shut-off, poppet valve style quick coupling,
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9
More informationSeries AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM
Series IR LINE COMPRESSED IR DISTRIUTION SYSTEM 26 IR LINE IR DISTRIUTION SYSTEM FETURES ND ENEFITS Installation ease: IR LINE installations can be carried out easily by the end-user, eliminating the need
More informationHIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationValve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
More informationT5 Series Pressures to 5,000 psi (345 bar)
Quality Pascal Industries manufactures each component with the utmost care and attention. Materials are carefully selected to Pascal Industries proprietary standards to ensure the highest quality. Components
More informationTransportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
More informationQuick-connects. QC, QF, QV and QM Series.
Quick-connects QC, Q, QV and QM ITOK Group ITOK Gmb (eadquarter) Sprendlinger andstr. 5, 309 Offenbach am Main, Germany Tel.: +9 9 900 9 ax: +9 9 900 95 ITOK, Inc. 33 North Promenade lvd., Suite 750, Stafford,
More informationProduct Information Product Information
SBCouplings Product Information Product Information Art. No: PR-010301-0112 Version:110330 Art.No XB06 Version 140630 Introduction About Mann Tek Mann Teknik AB is a Swedish company located in Mariestad,.
More information1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
More information2380N High pressure hose. Design Factor >2:1. CONSTRUCTION Core tube : Polyamide. Hoses with design factor >2:1 2380N
C 2380N 2380N High pressure hose CONSTRUCTION Core tube : Polyamide Pressure reinforcement : Two spiral layers and two open spiral layers of high tensile steel wire Cover : Polyurethane Standard colour
More informationKF O-Ring & Packed Stem Style Needle Valves
KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low pressures. These valves offer exceptional regulating properties
More informationTube cleaning. Chapter C. Hose 2240D High pressure tube cleaning hose... C-2
C Table of contents Chapter C Hose 2240D High pressure tube cleaning hose... C-2 Related fittings 106TX JIC female swivel... C-3 1YTX Type M female swivel... C-3 1C9X Metric female swivel heavy series
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationSeries HOL-W Welded Construction Hydraulic Cylinders
Series HOL-W Welded Construction Hydraulic Cylinders Description Series HOL-W hydraulic cylinders are available in Industrial and Marine specifications, they are of a heavy duty welded construction and
More information1 Sizes: 2" to 12"NB (50 to 300 mm) Built-In End Connections: Flange Ends (2" to 12") or Threaded Ends (2", 2-1/2" & 3") or Combination Pressure Rating: ANSI Class 150 (PN 20) = 285 PSIG (19.5 Bar) and
More informationNon-Spill Couplings zfc42 NS Series. Hydraulic Quick Couplings. B Hydraulics. Features. Applications. Note. Performance. Specifications B-20
Non-Spill ouplings zfc NS Series 8 7 pplications Non-Spill couplings by Parker are widely used in the public utility market where hydraulic oil spillage can constitute a serious safety hazard, particularly
More informationClass 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable
Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication
More informationinstrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
More informationCheck Valves. C, CA, CH, CP, and CPA Series. Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures
Check Valves C, CA, CH, CP, and CPA Series Working pressures up to 6000 psig (413 bar) Adjustable and fixed cracking pressures Variety of end connections 316 stainless steel and brass materials Check Valves
More informationMETERING VALVES H1300 SERIES.
METERING VLVES H00 SERIES www.hamlet.com METERING VLVES H00 SERIES H, HF & HXF00 SERIES FETURES Forgedbody St.St.or Brass Construction Straight and Patterns Panel Mounting MWP 000 psig ( bar) MWT 00 F
More informationPneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
More informationWE CONTROL WHAT MATTERS
WE CONTROL WHAT MATTERS Valve control solutions for gas processing plants Industrial Control Valves and Regulators Ramén Valves Control Made in Sweden Industries Ramén Ball Sector Valve Type KS, designed
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationPneufit C composite and Pneufit M fittings Inch
Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad
More informationNS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
More information