DIN Coupling UNION COMPLETE F ORGED A ND CASTED DIN SKS EN A (DIN R2) Seals
|
|
|
- Florence Allen
- 5 years ago
- Views:
Transcription
1 SKS EN A (DIN R2) DIN Coupling The so-called dairy coupling according DIN is the most applied screw coupling within the food industry. The round thread and the huge tolerances ensure that the coupling always closes. If necessary with an increased seal. This is a little old fashion, but it shows the usability and the popularity. The coupling is officially standardized with NW dimensions, but there are also types available with inches and ISO dimensions. A lot of equipment or instruments are provided with a coupling according DIN Size ranges and material volgens DIN en EN According the norm you need the use forged materials, however there are a lot of cast materials available. SKS has both qualities available and can be specified with different article numbers. Tolerances and specifications DIN and 2, DIN 11887, DIN ISO , ISO 48, FDA and BGA Seals Pressure application (to 140 C) DN10 DN40 max. 40 bar DN50 DN100 max. 25 bar DN125 DN150 max. 16 bar DN200 max. 10 bar Cerificates The forged executions can be provided with a 3.1 certificate. Standard there is a certificate of the rough material, but the parts can also be delivered with a certificate according to WAZ 3.1 AD2000W2. Peculiarities EHEGD marked if provided of a SKS seal in combination with the SKS liner and seal. Type and codes Liner D, male thread C, nut F and seal G ; internal Ra value < 0.8µm Connection : weld (S), short (SK), expanding male part (W) UNION COMPLETE F ORGED A ND CASTED DIN DN A B C D E Kg 304/NBR forged 316L/NBR forged 304/NBR casted 316L/NBR casted 10 34,0 38,0 0, ,0 44,0 0, ,0 54,0 0, ,0 63,0 0, ,0 70,0 0, ,0 78,0 0, ,0 92,0 0, ,0 112,0 1, ,0 127,0 1, ,0 148,0 2, ,0 178,0 3, ,0 210,0 5,
2 SKS EN A (DIN R2) W ELDING MALEPART FORGED AND CA STED DIN SC DN A B C D E Kg 304(L) forged 316L forged 304 casted 316L casted 10 21,0 10,0 13,0 Rd28x1/8" 0, ,0 16,0 19,0 Rd34x1/8" 0, ,0 20,0 23,0 Rd44x1/6" 0, ,0 26,0 29,0 Rd52x1/6" 0, ,0 32,0 35,0 Rd58x1/6" 0, ,0 38,0 41,0 Rd65x1/6" 0, ,0 50,0 53,0 Rd78x1/6" 0, ,0 66,0 70,0 Rd95x1/6" 0, ,0 81,0 85,0 Rd110x1/4" 0, ,0 89,0 95,0 Rd120x1/4" 0, ,0 100,0 104,0 Rd130x1/4" 0, ,0 125,0 129,0 Rd160x1/4" 1, ,0 150,0 154,0 Rd190x1/4" 1, ,0 200,0 204,0 Rd240x1/4" 2, LINER FORGED A ND CASTED DIN SD DN A B C D E Kg 304(L) forged 316L forged 304 casted 316L casted 10 17,0 10,0 13,0 22,0 0, ,0 16,0 19,0 28,0 0, ,0 20,0 23,0 36,0 0, ,0 26,0 29,0 44,0 0, ,0 32,0 35,0 50,0 0, ,0 38,0 41,0 56,0 0, ,0 50,0 53,0 68,5 0, ,0 66,0 70,0 86,0 0, ,0 81,0 85,0 100,0 0, ,0 89,0 95,0 111,0 0, ,0 100,0 104,0 121,0 0, ,0 125,0 129,0 150,0 0, ,0 150,0 154,0 176,0 1, ,0 200,0 204,0 226,0 1,
3 SKS EN A (DIN R2) NUT F O RGED A ND CA STED DIN F DN A B C D E Kg 304(L) forged 316L forged 304(L) casted 10 18,0 3,0 38,0 19,0 Rd28x1/8" 0, ,0 3,0 44,0 25,0 Rd34x1/8" 0, ,0 3,0 54,0 31,0 Rd44x1/6" 0, ,0 3,0 63,0 36,0 Rd52x1/6" 0, ,0 3,0 70,0 42,0 Rd58x1/6" 0, ,0 3,0 78,0 49,0 Rd65x1/6" 0, ,0 3,0 92,0 62,0 Rd78x1/6" 0, ,0 4,0 112,0 80,0 Rd95x1/6" 0, ,0 4,0 119,0 88,0 Rd104x1/6" 0, ,0 4,0 127,0 94,0 Rd110x1/4" 0, ,0 4,0 138,0 104,0 Rd120x1/4" 0, ,0 5,0 148,0 115,0 Rd130x1/4" 0, ,0 5,0 178,0 138,0 Rd160x1/4" 1, ,0 6,0 210,0 164,0 Rd190x1/4" 2, ,0 6,0 260,0 214,0 Rd240x1/4" 2,
4 SKS EN A (DIN R2) GASKET WITH COLLAR DIN GL DN A B C D E Kg NBR (Perbunan) EPDM FKM (Viton) VMQ (Siliconen) 10 5,0 10,5 20,0 0, ,0 16,5 26,0 0, ,0 20,5 33,0 0, ,0 26,5 40,0 0, ,0 32,5 46,0 0, ,0 38,5 52,0 0, ,0 50,5 64,0 0, ,0 66,5 81,0 0, ,0 81,5 95,0 0, ,0 100,5 114,0 0, ,0 125,0 142,0 0, ,0 150,0 167,0 0, XNBR GASKET THICK TYPE DIN G+ DN A B C D E Kg NBR (Perbunan) EPDM FPM (Viton) MVQ (Siliconen) 25 8,0 30,0 40,0 0, ,0 36,0 46,0 0, ,0 42,0 52,0 0, ,0 54,0 64,0 0, ,0 71,0 81,0 0, ,0 85,0 95,0 0, ,0 104,0 114,0 0,
5 SKS EN A (DIN R2) GASKET DIN G DN A B C D E Kg NBR (Perbunan) HNBR EPDM MVQ (Siliconen) FPM (Viton) PTFE (Teflon) 10 4,5 12,0 20,0 0, ,5 18,0 26,0 0, ,5 23,0 33,0 0, ,0 30,0 40,0 0, ,0 36,0 46,0 0, ,0 42,0 52,0 0, ,0 54,0 64,0 0, ,0 71,0 81,0 0, ,0 85,0 95,0 0, ,0 94,0 104,0 0, ,0 104,0 114,0 0, ,0 130,0 142,0 0, ,0 155,0 167,0 0, ,0 204,0 216,0 0,
6 SKS EN A (DIN R2) The Hygienic SKS Union SKS supplies a revolutionary breakthrough in solving your H.A.C.C.P. matters with the special designed seal-ring* for DIN connections. The connections in a process line are one of the most frequently encountered C.C.P. (Critical Control Points). A simple change of the gasket with the SKS solution eliminates all negative aspects of a standard gasket. The S.K.S. seal consists of a Stainless Steel part and a rubber part. It has been tested by TNO-food according to the E.H.E.D.G. test procedure and is officially certified for use in hygienic environments. The centre ring and the SKS liner (with integrated centre ring) enables a metal on metal connection between the male part and liner. This guaranties a perfect alignment and gives a limitation of deformation of the gasket. The special designed gasket fills all dead areas in the coupling and will expand to the outside in cases of high temperature. This solution takes all critical points of a DIN coupling away. STANDARD DIN The SKS gasket consists in 2 executions : This execution is an easy solution to upgrade your installed couplings to the essential EHEDG norm. You don t have to replace the complete coupling. This is the most eligible execution for your critical points because of the integrated centre ring. The SKS liner makes installing and maintenance easier. The SKS liner is perfect for new situations. S.K.S. GASKET Material Guide-space ring : Stainless Steel 316 (W.St ) SKS liner: : Stainless steel 316L (W.St ) Seal ring: : Perbunan/NBR > blue > -25 to +110 C EPDM > black > -40 to +130 C Range: : DN : Inch 1-1,25-1,5-2 -2, AFDICHTING CENTREERRING The SKS gasket physical and functional different from the standard DIN coupling. If the gasket is not right installed, it will leak and possibly it will be damaged. This kind of coupling with a limitation of deformation also has a limitation in application because of the strict mounting alignment. Always read the mounting instructions or make contact with one of our employees. Q-Plus Superior range that fitts 39
7 SKS EN A (DIN R2) Q-Plus Superior range that fitts SKS GASKET SET DIN EHEDG DN NBR (Perbunan) EPDM MVQ (Siliconen) FKM (Viton) 316 Centreerring < > < > < > < > < > SKS LINER DIN (EHEDG) Q-Plus Superior range that fitts DN A B C D E Kg 304L 316L 10 21,5 10,0 13,0 22,0 0,015 op aanvraag ,5 16,0 19,0 28,0 0,015 op aanvraag ,5 20,0 23,0 36,0 0,050 op aanvraag ,1 26,0 29,0 44,0 0,080 op aanvraag ,1 32,0 34,0 50,0 0,140 op aanvraag ,1 38,0 41,0 56,0 0,150 op aanvraag ,1 50,0 53,0 68,05 0,180 op aanvraag ,1 66,0 70,0 86,0 0,330 op aanvraag ,0 81,0 85,0 100,0 0,400 op aanvraag ,6 100,0 104,0 121,0 0,630 op aanvraag
8 SKS EN A (DIN R2) BLINDNUT DIN FB 10 18,5 3,5 38,0 Rd28x1/8" 0, ,5 3,5 44,0 Rd34x1/8" 0, ,5 3,5 54,0 Rd44x1/6" 0, ,5 3,5 63,0 Rd52x1/6" 0, ,5 3,5 70,0 Rd58x1/6" 0, ,5 3,5 78,0 Rd65x1/6" 0, ,5 3,5 92,0 Rd78x1/6" 0, ,5 4,5 112,0 Rd95x1/6" 0, ,5 4,5 127,0 Rd110x1/4" 1, ,5 5,5 148,0 Rd130x1/4" 1, ,5 5,5 178,0 Rd160x1/4" 1, ,5 6,5 210,0 Rd190x1/4" 3, ,5 6,5 260,0 Rd240x1/4" 4, BLINDNUT WITH BOSS DIN FB DN / Inch A B C D E Kg 304(L) 316L 10 18,5 3,5 38,0 10,0 Rd28x1/8" 0, ,5 3,5 44,0 10,0 Rd34x1/8" 0, ,5 3,5 54,0 10,0 Rd44x1/6" 0, / 1" 21,5 3,5 63,0 10,0 Rd52x1/6" 0, / 1,25" 21,5 3,5 70,0 10,0 Rd58x1/6" 0, / 1,5" 21,5 3,5 78,0 10,0 Rd65x1/6" 0, / 2" 22,5 3,5 92,0 10,0 Rd78x1/6" 0, / 2,5" 25,5 4,5 112,0 10,0 Rd95x1/6" 0, / 3" 25,5 4,5 119,0 10,0 Rd104x1/6" 0, ,5 4,5 127,0 10,0 Rd110x1/4" 1, / 4" 31,5 5,5 148,0 10,0 Rd130x1/4" 1, ,5 5,5 178,0 10,0 Rd160x1/4" 1, ,5 6,5 210,0 10,0 Rd190x1/4" 3,
9 SKS EN A (DIN R2) BLINDNUT COMPLETE DIN DN A B C D E Kg 304L 316L 10 18,5 3,5 38,0 10,0 Rd28x1/8" 0, ,5 3,5 44,0 10,0 Rd34x1/8" 0, ,5 3,5 54,0 10,0 Rd44x1/6" 0, ,5 3,5 63,0 10,0 Rd52x1/6" 0, ,5 3,5 70,0 10,0 Rd58x1/6" 0, ,5 3,5 78,0 10,0 Rd65x1/6" 0, ,5 3,5 92,0 10,0 Rd78x1/6" 0, ,5 4,5 112,0 10,0 Rd95x1/6" 0, ,5 4,5 127,0 10,0 Rd110x1/4" 1, ,5 5,5 148,0 10,0 Rd130x1/4" 1, ,5 5,5 178,0 10,0 Rd160x1/4" 2, ,5 6, Rd190x1/4" 3, GASKET DISC F OR BLINDNUT DIN DN A B C D E Kg NBR EPDM FKM (Viton) 10 3,0 28,0 0, ,0 34,0 0, ,0 44,0 0, ,0 52,0 0, ,0 58,0 0, ,0 65,0 0, ,0 78,0 0, ,0 95,0 0, ,0 110,0 0, ,0 130,0 0, ,0 160,0 0, ,0 190,0 0, ,0 240,0 0,
10 SKS EN A (DIN R2) C HAIN F OR BLINDNUT DIN DN A B C D E Kg SKS nr ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, ,0 0, LINER BLANK DIN DB 10 9,0 6,0 18,0 22,0 0, ,0 6,0 24,0 28,0 0, ,0 8,0 30,0 36,0 0, ,0 10,0 35,0 44,0 0, ,0 10,0 41,0 50,0 0, ,0 10,0 48,0 56,0 0, ,0 11,0 61,0 68,5 0, ,0 12,0 79,0 86,0 0, ,0 12,0 93,0 100,0 0, ,0 15,0 114,0 121,0 1, ,0 17,0 137,0 150,0 2, ,0 18,0 163,0 176,0 4,
11 SKS EN A (DIN R2) LINER BLIND PRESSED DIN DB 25 10,0 47,0 0, ,0 53,0 0, ,0 61,0 0, ,0 73,0 0, ,0 90,0 0, ,0 103,0 0, ,0 123,0 0, MALE PART BLIND DIN CB 10 21,0 20,0 SW17 Rd28x1/8" 0, ,0 26,0 SW19 Rd34x1/8" 0, ,0 26,0 SW19 Rd44x1/6" 0, ,0 34,0 SW27 Rd52x1/6" 0, ,0 34,0 SW27 Rd58x1/6" 0, ,0 34,0 SW27 Rd65x1/6" 0, ,0 34,0 SW27 Rd78x1/6" 0, ,0 34,0 SW27 Rd95x1/6" 0, ,0 34,0 SW27 Rd110x1/4" 0, ,0 34,0 SW27 Rd130x1/4" 1,
12 SKS EN A (DIN R2) EXPANDING MALEPART DIN C 10 21,0 12,0 4,0 12,2 Rd28x1/8" 0, ,0 12,0 4,0 18,2 Rd34x1/8" 0, ,0 12,0 6,0 22,2 Rd44x1/6" 0, ,0 15,0 7,0 28,2 Rd52x1/6" 0, ,0 18,0 7,0 34,2 Rd58x1/6" 0, ,0 20,0 7,0 40,2 Rd65x1/6" 0, ,0 22,0 7,0 52,2 Rd78x1/6" 0, ,0 25,0 8,0 70,3 Rd95x1/6" 0, ,0 28,0 8,0 85,3 Rd110x1/4" 0, ,0 35,0 10,0 104,3 Rd130x1/4" 0, EXPANDING LINER DIN D 10 17,0 12,0 6,0 12,2 22,5 0, ,0 12,0 6,0 18,2 28,5 0, ,0 12,0 8,0 22,2 36,5 0, ,0 15,0 10,0 28,2 44,0 0, ,0 18,0 10,0 34,2 50,0 0, ,0 20,0 10,0 40,2 56,0 0, ,0 22,0 11,0 52,2 68,5 0, ,0 25,0 12,0 70,3 86,0 0, ,0 28,0 12,0 85,3 100,0 0, ,0 35,0 15,0 104,3 121,0 0,
13 SKS EN A (DIN R2) MALEPART THREATED OUTSIDE DIN 11851/BSP CT 10 40,0 14,0 G3/8" SW17 Rd28x1/8" 0, ,0 14,0 G1/2" SW24 Rd34x1/8" 0, ,0 14,0 G3/4" SW30 Rd44x1/6" 0, ,0 20,0 G1" SW41 Rd52x1/6" 0, ,0 20,0 G1.1/4" SW46 Rd58x1/6" 0, ,0 20,0 G1.1/2" SW50 Rd65x1/6" 0, ,0 20,0 G2" SW65 Rd78x1/6" 0, ,0 22,0 G2.1/2" SW80 Rd95x1/6" 0, ,0 25,0 G3" SW95 Rd110x1/4" 0, ,0 30,0 G4" SW117 Rd130x1/4" 1, LINER THREADED OUTSIDE DIN 11851/BSP DT 10 38,0 14,0 G3/8" SW14 22,0 0, ,0 14,0 G1/2" SW19 28,0 0, ,0 14,0 G3/4" SW27 36,0 0, ,0 20,0 G1" SW30 44,0 0, ,0 20,0 G1.1/4" SW36 50,0 0, ,0 20,0 G1.1/2" SW44 56,0 0, ,0 20,0 G2" SW55 68,5 0, ,0 22,0 G2.1/2" SW70 86,0 0, " ,0 25,0 G3" SW88 100,0 0, ,0 30,0 G4" SW ,0 1,
14 SKS EN A (DIN R2) MALEPPART THREADED INSIDE DIN 11851/BSP CT 10 30,0 14,0 G3/8" SW19 Rd28x1/8" 0, ,0 14,0 G1/2" SW24 Rd34x1/8" 0, ,0 14,0 G3/4" SW30 Rd44x1/6" 0, ,0 20,0 G1" SW41 Rd52x1/6" 0, ,0 20,0 G1.1/4" SW46 Rd58x1/6" 0, ,0 20,0 G1.1/2" SW55 Rd65x1/6" 0, ,0 20,0 G2" SW65 Rd78x1/6" 0, ,0 22,0 G2.1/2" SW80 Rd95x1/6" 0, ,0 25,0 G3" SW95 Rd110x1/4" 0, ,0 30,0 G4" SW117 Rd130x1/4" 0, LINER THREADED INSIDE DIN DT 15 44,0 16,0 G1/2" SW24 0, ,0 20,0 G3/4" SW30 0, ,0 26,0 G1" SW41 0, ,0 32,0 G1.1/4" SW46 0, ,0 38,0 G1.1/2" SW55 0, ,0 50,0 G2" SW65 0, ,0 66,0 G2.1/2" SW80 1, ,0 81,0 G3" SW95 1, ,0 100,0 G4" SW117 2,
15 SKS EN A (DIN R2) HOSE MALEPART B EER DIN ,0 59,0 20,0 27,0 Rd52x1/6" 0, ,0 70,0 27,5 34,0 Rd58x1/6" 0, ,0 84,0 36,0 42,5 Rd65x1/6" 0, ,0 97,0 47,0 53,0 Rd78x1/6" 0, ,0 113,0 60,0 68,0 Rd95x1/6" 0, ,0 132,0 76,0 83,0 Rd110x1/4" 1, ,0 141,0 93,0 103,0 Rd130x1/4" 2, HOSE MALEPART TYPE DIN DIN ,0 31,0 10,0 15,0 Rd28x1/8" 0, ,0 40,0 16,0 21,0 Rd34x1/8" 0, ,0 47,0 20,0 27,0 Rd44x1/6" 0, ,0 57,0 26,0 32,0 Rd52x1/6" 0, ,0 67,0 32,0 40,0 Rd58x1/6" 0, ,0 81,0 38,0 48,0 Rd65x1/6" 0, ,0 95,0 50,0 57,0 Rd78x1/6" 0, ,0 112,0 66,0 76,0 Rd95x1/6" 1, ,0 127,0 81,0 90,0 Rd110x1/4" 1, ,0 146,0 100,0 110,0 Rd130x1/4" 2,
16 DIN Coupling The so-called dairy coupling according DIN is the most applied screw coupling within the food industry. The round thread and the huge tolerances ensure that the coupling always closes. If necessary with an increased seal. This is a little old fashion, but it shows the usability and the popularity. The coupling is officially standardized with DN dimensions, but there are also types available with inches and ISO dimensions. A lot of equipment or instruments are provided with a coupling according DIN Size ranges and material According DIN 11851, with exception of the welding connections. This is based on the inch dimensions. According the norm you need the use forged materials, however there are a lot of cast materials available. Tolerances and specifications DIN and 2, DIN 11887, DIN ISO , ISO 48, FDA and BGA Type and codes Liner D, male thread C, nut F and seal G ; internal Ra value < 1,6μm Connection : weld (S), short (SK), expanding male part (W) Other connections don t have a norm : Blind, hose connector, screw Seals Pressure application (to 140 C) DN10 DN40 max. 40 bars DN50 DN100 max. 25 bars DN125 DN150 max. 16 bars DN200 max. 10 bars Peculiarities EHEGD marked if provided of a SKS seal in combination with the SKS liner and seal. UNION COMPLETE DIN Inch A B C D E Kg 304L NBR 316L NBR 1" 45,0 63,0 0, ,25" 51,0 70,0 0, ,5" 53,0 78,0 0, " 57,0 92,0 0, ,5" 65,0 112,0 1, " 65,1 119,0 1, " 89,0 148,0 2, CROSS-SECTION GASKET AR EA DIN COUPLING 39
17 MALE PART DIN Inch A B C D E Kg 304L 316L 1" 29,0 22,9 25,4 Rd52x1/6" 0, ,25" 32,0 29,3 31,8 Rd58x1/6" 0, ,5" 33,0 35,1 38,1 Rd65x1/6" 0, " 35,0 47,8 50,8 Rd78x1/6" 0, ,5" 40,0 60,2 63,5 Rd95x1/6" 0, " 40,0 72,8 76,1 Rd104x1/6" 0, " 54,0 97,4 101,6 Rd130x1/4" 0, MALE PART DIN / ISO DN / ISO A B C D E Kg 304L 316L 10 / 17,2 21,0 14,2 17,2 Rd28x1/8" 0, / 21,3 21,0 18,1 21,3 Rd34x1/8" 0, / 26,9 24,0 23,7 26,9 Rd44x1/6" 0, / 33,7 29,0 29,7 33,7 Rd52x1/6" 0, / 42,4 32,0 38,4 42,4 Rd58x1/6" 0, / 48,3 33,0 44,3 48,3 Rd65x1/6" 0, / 60,3 35,0 56,3 60,3 Rd78x1/6" 0, / 76,1 40,0 71,5 76,1 Rd95x1/6" 0, / 88,9 45,0 84,3 88,9 Rd110x1/4" 0, / 114,3 54,0 109,1 114,3 Rd130x1/4" 0, / 139,7 46,0 134,5 139,7 Rd160x1/4" 1, / 168,3 50,0 163,1 168,3 Rd190x1/4" 1,
18 LINER DIN Inch A B C D E Kg 304L 316L 1" 22,0 22,9 25,4 44,0 44,0 0, ,25" 25,0 29,3 31,8 50,0 50,0 0, ,5" 26,0 35,1 38,1 56,0 56,0 0, " 28,0 47,8 50,8 68,5 68,5 0, ,5" 32,0 60,2 63,5 86,0 86,0 0, " 32,0 72,8 76,1 93,0 93,0 0, " 44,0 97,4 101,6 121,0 121,0 0, LINER PART DIN / ISO DN / ISO A B C D E Kg 304L 316L 10 / 17,2 17,0 14,2 22,0 0, / 21,3 17,0 18,1 28,0 0, / 26,9 18,0 23,7 36,0 0, / 33,7 22,0 29,7 44,0 0, / 42,4* 25,0 38,4 50,0 0, / 48,3 26,0 44,3 56,0 0, / 60,3 28,0 56,3 68,5 0, / 76,1 32,0 71,5 86,0 0, / 88,9 37,0 84,3 100,0 0, / 114,3 44,0 109,1 121,0 0, / 139,7 34,0 134,5 150,0 0, / 168,3 37,0 163,1 176,0 1, * = DN32 requires a special nut 41
19 EXPANDING MALEPART DIN Inch A B C D E Kg 304L 316L 1" 29,0 15,0 7,0 25,6 Rd52x1/6" 0, ,25" 32,0 18,0 7,0 32,0 Rd58x1/6" 0, ,5" 33,0 20,0 7,0 38,3 Rd65x1/6" 0, " 35,0 22,0 7,0 51,0 Rd78x1/6" 0, ,5" 40,0 25,0 8,0 63,8 Rd95x1/6" 0, " 40,0 25,0 8,0 76,4 Rd104x1/6" 0, " 54,0 35,0 10,0 101,9 Rd130x1/4" 1, EXPANDING LINER DIN A B C D E Kg 304L 316L 1" 22,0 15,0 10,0 25,6 44,0 0, ,25" 25,0 18,0 10,0 32,0 50,0 0, ,5" 26,0 20,0 10,0 38,3 56,0 0, " 28,0 22,0 11,0 51,0 68,5 0, ,5" 32,0 25,0 12,0 63,8 86,0 0, " 32,0 25,0 12,0 76,4 93,0 0, " 44,0 35,0 15,0 101,9 121,0 0,
20 NUT DIN DN / Inch A B C D E Kg 304L 316L 25 / 1" 21,0 3,0 63,0 36,0 Rd52x1/6" 0, / 1,25" 21,0 3,0 70,0 42,0 Rd58x1/6" 0, / 1,5" 21,0 3,0 78,0 49,0 Rd65x1/6" 0, / 2" 22,0 3,0 92,0 62,0 Rd78x1/6" 0, / 2,5" 25,0 4,0 112,0 80,0 Rd95x1/6" 0, / 3" 25,0 4,0 119,0 88,0 Rd104x1/6" 0, / 4" 31,0 5,0 148,0 115,0 Rd130x1/4" 0, GASKET DIN DN / Inch A B C D E Kg NBR (Perbunan) EPDM HNBR MVQ (Siliconen) FPM (Viton) PTFE 25 / 1" 5,0 30,0 40,0 0, / 1,25" 5,0 36,0 46,0 0, / 1,5 5,0 42,0 52,0 0, / 2" 5,0 54,0 64,0 0, / 2,5" 5,0 71,0 81,0 0, / 3" 5,0 78,0 88,0 0, / 4" 6,0 104,0 114,0 0,
21 GASKET H IGH DIN DN / Inch A B C D E Kg NBR (Perbunan) EPDM FPM (Viton) 25 / 1" 8,0 30,0 40,0 0, / 1,5" 8,0 42,0 52,0 0, / 2" 8,0 54,0 64,0 0, / 2,5" 8,0 71,0 81,0 0, " 8,0 78,0 88,0 0, / 4" 8,0 104,0 114,0 0, GASKET WITH LIP DIN (L-PROFIEL) DN / Inch A B C D E Kg MVQ (Siliconen) NBR (Perbunan) EPDM FPM (Viton) XNBR 25 / 1" 6,0 26,5 40,0 0, / 1,25" 6,0 32,5 46,0 0, / 1,5" 6,0 38,5 52,0 0, / 2" 6,0 50,5 64,0 0, / 2,5" 6,0 66,5 81,0 0, " 6,0 78,0 88,0 0, / 4" 6,0 100,5 114,0 0,
22 The Hygienic SKS Union SKS supplies a revolutionary breakthrough in solving your H.A.C.C.P. matters with the special designed seal-ring* for DIN connections. The connections in a process line are one of the most frequently encountered C.C.P. (Critical Control Points). A simple change of the gasket with the SKS solution eliminates all negative aspects of a standard gasket. The S.K.S. seal consists of a Stainless Steel part and a rubber part. It has been tested by TNO-food according to the E.H.E.D.G. test procedure and is officially certified for use in hygienic environments. The centre ring and the SKS liner (with integrated centre ring) enables a metal on metal connection between the male part and liner. This guaranties a perfect alignment and gives a limitation of deformation of the gasket. The special designed gasket fills all dead areas in the coupling and will expand to the outside in cases of high temperature. This solution takes all critical points of a DIN coupling away. STANDARD DIN The SKS gasket consists in 2 executions : This execution is an easy solution to upgrade your installed couplings to the essential EHEDG norm. You don t have to replace the complete coupling. This is the most eligible execution for your critical points because of the integrated centre ring. The SKS liner makes installing and maintenance easier. The SKS liner is perfect for new situations. S.K.S. GASKET Material Guide-space ring : Stainless Steel 316 (W.St ) SKS liner: : Stainless steel 316L (W.St ) Seal ring: : Perbunan/NBR > blue > -25 to +110 C EPDM > black > -40 to +130 C Range: : DN : Inch 1-1,25-1,5-2 -2, GASKET CENTRE RING The SKS gasket physical and functional different from the standard DIN coupling. If the gasket is not right installed, it will leak and possibly it will be damaged. This kind of coupling with a limitation of deformation also has a limitation in application because of the strict mounting alignment. Always read the mounting instructions or make contact with one of our employees. Q-Plus Superior range that fitts 45
23 SKS GASKET SET DIN EHEDG Inch NBR (Perbunan) EPDM MVQ (Siliconen) FKM (Viton) 316 Centreerring 1" /2" < " > " /2" " < " > " SKS LINER DIN EHEDG Inch A B C D E Kg 316L 1" 27,0 22,9 25,4 44,0 0, ,5" 31,0 35,1 38,1 56,0 0, " 33,0 47,8 50,8 68,5 0, ,5" 37,0 60,2 63,5 86,0 0, " 37,0 72,8 76,1 93,0 0, " 49,5 97,4 101,6 121,0 0,
24 BLINDNUT FLAT DIN Inch A B C D E Kg 304L 316L 25 / 1" 21,5 3,5 63,0 Rd52x1/6" 0, / 1,25" 21,5 3,5 70,0 Rd58x1/6" 0, / 1,5" 21,5 3,5 78,0 Rd65x1/6" 0, / 2" 22,5 3,5 92,0 Rd78x1/6" 0, / 2,5" 25,5 4,5 112,0 Rd95x1/6" 0, / 3" 25,5 4,5 119,0 Rd104x1/6" 0, / 4" 31,5 5,5 148,0 Rd130x1/4" 1, BLIND NUT WITH BOSS DIN DN / Inch A B C D E Kg L 25 / 1" 21,5 3,5 63,0 10,0 Rd52x1/6" 0, / 1,25" 21,5 3,5 70,0 10,0 Rd58x1/6" 0, / 1,5" 21,5 3,5 78,0 10,0 Rd65x1/6" 0, / 2" 22,5 3,5 92,0 10,0 Rd78x1/6" 0, / 2,5" 25,5 4,5 112,0 10,0 Rd95x1/6" 0, / 3" 25,5 4,5 119,0 10,0 Rd104x1/6" 0, / 4" 31,5 5,5 148,0 10,0 Rd130x1/4" 1,
25 BLINDNUT COMPLETE DIN DN / Inch A B C D E Kg 304L 316L 25 / 1" 21,5 3,5 63,0 10,0 Rd52x1/6" 0, / 1,25" 21,5 3,5 70,0 10,0 Rd58x1/6" 0, / 1,5" 21,5 3,5 78,0 10,0 Rd65x1/6" 0, / 2" 22,5 3,5 92,0 10,0 Rd78x1/6" 0, / 2,5" 25,5 4,5 112,0 10,0 Rd95x1/6" 0, " 25,5 4,5 119,0 10,0 Rd104x1/6" 0, / 4" 31,5 5,5 148,0 10,0 Rd130x1/4" 1, GASKET D ISC F OR BLINDNUT DIN DN / Inch A B C D E Kg NBR EPDM FKM (Viton) 25 / 1" 3,0 52,0 0, / 1,25" 3,0 58,0 0, / 1,5" 3,0 65,0 0, / 2" 3,0 78,0 0, / 2,5" 3,0 95,0 0, " 3,0 110,0 0, / 4" 3,0 130,0 0,
26 LINER BLANK DIN DB DN / Inch A B C D E Kg 304(L) 316L 25 / 1" 13,0 10,0 35,0 44,0 0, / 1,25" 13,0 10,0 41,0 50,0 0, / 1,5" 13,0 10,0 48,0 56,0 0, / 2" 14,0 11,0 61,0 68,5 0, / 2,5" 16,0 12,0 79,0 86,0 0, " 16,0 12,0 93,0 95,0 0, / 4" 20,0 15,0 114,0 121,0 1, ,0 17,0 137,0 150,0 2, ,0 18,0 163,0 176,0 4, MALE PART B LANK DIN DN / Inch A B C D E Kg 304L 316L 25 / 1" 24,0 34,0 SW27 Rd52x1/6" 0, / 1,25" 24,0 34,0 SW27 Rd58x1/6" 0, / 1,5" 24,0 34,0 SW27 Rd65x1/6" 0, / 2" 24,0 34,0 SW27 Rd78x1/6" 0, / 2,5" 28,0 34,0 SW27 Rd95x1/6" 0, / 3" 28,0 34,0 SW27 Rd104x1/6" 0, / 4" 30,0 34,0 SW27 Rd130x1/4" 1,
27 MALEPART THREATED OUTSIDE DIN 11851/BSP CT 25 48,0 20,0 G1" SW41 Rd52x1/6" 0, ,0 20,0 G1.1/4" SW46 Rd58x1/6" 0, ,0 20,0 G1.1/2" SW50 Rd65x1/6" 0, ,0 20,0 G2" SW65 Rd78x1/6" 0, ,0 22,0 G2.1/2" SW80 Rd95x1/6" 0, ,0 25,0 G3" SW95 Rd110x1/4" 0, ,0 30,0 G4" SW117 Rd130x1/4" 1, LINER THREADED OUTSIDE DIN 11851/BSP DT 25 50,0 20,0 G1" SW30 44,0 0, ,0 20,0 G1.1/4" SW36 50,0 0, ,0 20,0 G1.1/2" SW44 56,0 0, ,0 20,0 G2" SW55 68,5 0, ,0 22,0 G2.1/2" SW70 86,0 0, / 3" 60,0 25,0 G3" SW88 100,0 0, ,0 30,0 G4" SW ,0 1,
28 MALEPPART THREADED INSIDE DIN 11851/BSP CT 25 35,0 20,0 G1" SW41 Rd52x1/6" 0, ,0 20,0 G1.1/4" SW46 Rd58x1/6" 0, ,0 20,0 G1.1/2" SW55 Rd65x1/6" 0, ,0 20,0 G2" SW65 Rd78x1/6" 0, ,0 22,0 G2.1/2" SW80 Rd95x1/6" 0, ,0 25,0 G3" SW95 Rd110x1/4" 0, ,0 30,0 G4" SW117 Rd130x1/4" 0, LINER THREADED INSIDE DIN DT 25 49,0 26,0 G1" SW41 0, ,0 32,0 G1.1/4" SW46 0, ,0 38,0 G1.1/2" SW55 0, ,0 50,0 G2" SW65 0, ,0 66,0 G2.1/2" SW80 1, ,0 81,0 G3" SW95 1, ,0 100,0 G4" SW117 2,
29 HOSE MALEPART TYPE DIN DIN DN / Inch A B C D E Kg 304(L) 316L 25 / 1" 87,0 57,0 26,0 32,0 Rd52x1/6" 0, / 1,25" 97,0 67,0 32,0 40,0 Rd58x1/6" 0, / 1,5" 112,0 81,0 38,0 48,0 Rd65x1/6" 0, / 2" 127,0 95,0 50,0 57,0 Rd78x1/6" 0, / 2,5" 148,0 112,0 66,0 76,0 Rd95x1/6" 1, / 4" 190,0 146,0 100,0 110,0 Rd130x1/4" 2, HOSE MALEPART FORCED DIN DN / Inch A B C D E Kg 304(L) 316L 25 / 1" 82,0 30,0 26,0 0, / 1,25" 92,0 35,5 32,0 0, / 1,5" 102,0 43,0 38,0 0, / 2" 113,0 55,0 50,0 0, / 2,5" 125,0 73,0 66,0 0, " 135,0 89,0 81,0 0, / 4" 150,0 108,0 100,0 1,
30 HOSE LINER TYPE DIN DIN DN / Inch A B C D E Kg 304(L) 316L 25 / 1" 80,0 57,0 26,0 32,0 0, / 1,25" 90,0 67,0 32,0 40,0 0, / 1,5" 105,0 81,0 38,0 48,0 0, / 2" 120,0 95,0 50,0 57,0 0, / 2,5" 140,0 112,0 66,0 76,0 1, / 4" 180,0 146,0 100,0 110,0 2, HOSELINER FORCED DIN DN / Inch A B C D E Kg 304(L) 316L 25 / 1" 75,0 30,0 26,0 0, / 1,25" 85,0 35,5 32,0 0, / 1,5" 95,0 43,0 38,0 0, / 2" 106,0 55,0 50,0 0, / 2,5" 117,0 73,0 66,0 0, " 127,0 89,0 81,0 0, / 4" 140,0 108,0 100,0 0,
31 HYGIENIC HOSE C ONNECTIONS (RMO) Inch Press liner 316 Press sleeve 304 clamp shells alumium 1" ,25" ,5" " ,5" " " HYGIENIC PRESSED HOSE CONNECTION 54
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC
HYGIENIC TUBE & PROCESS COMPONENTS DIN/ISO/METRIC EN DIN (ISO/Metric) The most important norm range within Europe for industrial (non Food) applications consists of 2 dimension ranges. The ISO 1127 dimension
HYGIENIC TUBE & PROCESS COMPONENTS ASTM/ANSI
HYGIENIC TUBE & PROCESS COMPONENTS ASTM/ANSI ANSI/ASTM Worldwide, the installation materials for the industrial application according ANSI / ASTM are the most applied. The original American norm ranges
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
IDF / ISS Hygienic Union BS 4825 Part 4
IDF / ISS Hygienic Union S 4825 Part 4 This hygienic union has been widely used since its recommendation by the International Dairy Federation in 1960. This hexagonal screwed union is more commonly referred
GEMO UNIONS DIN11851/DIN TUBES AND FITTINGS. DIN11851 Unions All acc. To GERMANY DIN Standard EACH FITTINGS PACKAGING HAS A BARCODE
UNIONS DIN11851/DIN11850 DIN11851 Unions All acc. To GERMANY DIN Standard EA FITTINGS PAKAGING AS A BARODE 43 UNIONS DIN11851/DIN11850 The DIN union is the German standard hygienic fitting, A complete
SMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
DIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
HYGIENIC TUBE & PROCESS COMPONENTS DIN 11866
HYGIENIC TUBE & PROCESS COMPONENTS DIN 11866 DIN 11866 This norm range DIN 11866, DIN 11865 and DIN 11864 are linked to each other. The DIN 11866 is for example also mentioned in the other norms in the
Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A
01 SANITARY PIPE FITTING Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A 02 FERRULE / UNION / PIPE HOLDER Ferrule End Cap Ferrule Clamp Ferrule Gasket
T-smart Butterfly Valves. Made by GEA Tuchenhagen. GEA Mechanical Equipment / GEA Tuchenhagen
Liquids to Value T-smart Butterfly Valves Made by GEA Mechanical Equipment / T-smart Butterfly Valves For many years, butterfly valves have proven their worth in process plants with different types of
DIN /DIN Aseptic Screwed Union for ISO 1127 Schedule Pipe
/ Aseptic Screwed Union for ISO 1127 Schedule Pipe / Aseptic Screwed Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
The pumping action of the B series lobe displacement pump is achieved thanks to the counter-rotation of
INDUSTRY APPLICATION Rotary lobe pumps type B are positive displacement pumps for liquids of any viscosity with lubricating and non-lubricating properties. Lobe pumps are used in the chemical, pharmaceutical
Spare Parts. SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB
Spare Parts SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB2 2002-11 Type SMP-BCA - Stop Valve 2 Reg.: 9805 Intro.: 8605 Type SMP-BCA - Stop Valve 38mm 51mm 63.5mm 76mm 101.6mm Pos. Qty.
FOOD COUPLINGS DIN 11851
FOOD COUPLINGS DIN 11851 B.3. STANDARD Food couplings complying with DIN 11851 are used in the food, chemical and pharmaceutical industries to connect rubber food hoses and stainless steel pipes (in compliance
DIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
Operating Instruction:
Operating Instruction: Leakage - Butterfly valve with manual operation Types LSV 4365 LSV 4366 LSV 4367 LSV 4368 LSV 4369 LSV 4370 Kieselmann GmbH Paul-Kieselmann-Str. 4-10 75438 Knittlingen Telefon +49
Pressure Measurement Fittings
Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.).
611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
Pneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
INDUSTRIAL FITTINGS - quick release couplings
NiTO 1/2-3/4-1 system - couplings for water Material: Chromium plated brass Working temp.: Up to +80 C Sealing: NBR - cannot be used with fuel and oil (option - Viton). For valve O-ring made of EPDM. High
Clean Service CATALOG. Safety Relief Valves Series 48X. The-Safety-Valve.com
Clean Service Safety Relief Valves Series 48X CATALOG The-Safety-Valve.com Valve finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High Efficiency Mediumcontrolled
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
INDUSTRIAL HOSES - compensators
Working parameters of rubber expansion joints The parameters of rubber compensators given in the tables (, temperature and displacement) are the maximum values and they must not occur simultaneously. The
Air operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
FOOD COUPLINGS DIN 11851
FOOD COUPLINGS DIN 11851 B.3. FEMALE COUPLING WITH SMOOTH HOSE SHANK AND NUT ND Inch For hose Thread nut Weight/pc Reference 15 1/2" 13 RD 34 x 1/8" 0.22 DKV013 20 3/4" 19 RD 44 x 1/6" 0.28 DKV019 25 1"
611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
Pneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
Clamp connection DIN / ISO 1127 / ISO 2852 / ASME / BS Ferrules / gaskets / heavy duty clamps / hose adaptors...
MP ONNETION str. H121 Z121 lamp 32676 / 1127 / 2852 / SME / BS 4825... Ferrules / gaskets / heavy duty clamps / hose adaptors... MDE OF STINESS... RMT spol. s r. o. Řetová 82, 561 41 zech Republic MP ONNETION
Hygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS
Hygienic self-priming GEA Tuchenhagen -VARIFLOW centrifugal pump Series TPS Process Equipment GEA Tuchenhagen GEA Tuchenhagen -VARIFLOW Series TPS The hygienic self-priming GEA Tuchenhagen -VARIFLOW TPS
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
The Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
GEMÜ sterile sampling systems
GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,
Pressure transmitter UNIVERSAL CA
Pressure transmitter UNIVERSAL CA for food/pharmaceutical/biotechnology,type series CA2110 Features Universal pressure transmitter, hygienic design per EHEDG, FDA and GMP Stainless steel case, degree of
JUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features.
Data sheet 405052 Page 1/10 JUMO DELOS SI Precision pressure transmitter with switching contacts and display Application Food & pharma CIP/SIP systems Machine and system construction Air conditioning and
CombiTemp Accessories
CombiTemp Accessories Accessories for CombiTemp - the flexible building block system for temperature measurements Housings, standard DIN B and Bourdon-Haenni ø80 mm stainless steel Brackets for wall mounting
Cleanfit H CPA475. Technical Information. Retractable assembly for ph, ORP measurement under sterile conditions
Technical Information Cleanfit H CPA475 Retractable assembly for ph, ORP measurement under sterile conditions Application Food industry Beverage industry Pharmaceutical industry Drinking water The retractable
Pressure transmitter COMPACT ECOnomic
Pressure transmitter COMPACT ECOnomic for food/pharmaceutical/biotechnology, Type series CA1110 Features Digitale pressure transmitter Hygienic design according to EHEDG Case and wetted parts of stainless
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES modules in industrial design 52 mm 41 mm 25.4 mm Membrane diameter Membrane design 7/6 19/3.3 37/2 19/6 37/3.8
ESV - EGMO Sampling Valves
Hygienic Flow Equipment ESV - EGMO Sampling Valves Hygienic sampling valves for pharmaceutical & sanitary applications The EGMO Sampling Valves are uniquely designed for process quality control, which
F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE)
PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS
TETRA PAK VALVES. Sanitary Remote Controlled Valve Stop Valve mm/dn Type SRC FREEPHONE:
TETRA PAK VALVES For calls outside the UK Telephone +44 1777 701141 or Fax +44 1777 869983 FREEPHONE: 0800 666397 Sanitary Remote Controlled Valve Stop Valve - 38-101.6 mm/dn40-100 - Type SRC Alternatives
JUMO PEKA Process Connection Adapter
Data sheet 409711 Seite 1/6 JUMO PEKA Process Connection Adapter Brief description The process connection combines the measuring instrument (different physical measurement variables or electrolytic conductivity)
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Hygienic Centrifugal pumps
ygienic Centrifugal pumps CSA Series CSA series pumps are designed, tested and approved to EEDG (European ygienic Engineering & Design Group) hygiene protocols and to US 3A standards. Used mainly in the
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
Technical Information Weld-in adapter, Process adapter and Flanges
TI00426F/00/EN/16.14 71274021 Products Solutions Services Technical Information Weld-in adapter, Process adapter and Flanges Level and pressure measurement Application The adapters and the flanges are
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
megaflo BSP Pressure Relief Vent
Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
SÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
IN-LINE DISC & PISTON VALVES
ID & IP Series IN-LINE DISC & PISTON VALVES PROCESS VALVES IN-LINE DISC & PISTON VALVES M Seal In-Line Piston Valve Code: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded
Thermowell For sanitary applications Model TW61, for orbital welding
Temperature For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications for further approvals see page 5 Sanitary applications Food and beverage industry Bio and pharmaceutical
Diaphragm seal with sterile connection With union nut (milk thread fitting) Models , , and
Pressure Diaphragm seal with sterile connection With union nut (milk thread fitting) Models 990.18, 990.19, 990.20 and 990.21 WIKA data sheet DS 99.40 for further approvals see page 7 Applications Food
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
Thermowell For sanitary applications Model TW61, for orbital welding
s For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 for further approvals see page 5 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical
653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
Quick Disconnect Couplings
Quick Disconnect Couplings A WINNING TEAM GOODRIDGE AND YOU P U S H T H E L I M I T S Quick Disconnect Couplings 1 Quick Disconnect Couplings G-Link Quick Disconnect Couplings are manufactured only from
GE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
INDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
KEYSTONE. Hygienic butterfly valves model F250 & F251 Installation & Maintenance Instructions. 1 Contents 1 Contents 1
Installation & Maintenance Instructions KEYSTONE 1 Contents 1 Contents 1 2 Introduction 1 2.1 Valve use 1 2.2. Application area 1 2.3. Incorrect use 1 3. Safety 2 4. Transport and storage 2 5. Installation
WEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
" VALVES IN MOTION..." SAMPLING VALVES
" VALVES IN MOTION..." SAMPLING VALVES SWISS QUALITY ISO 9001 / 2008 SAMPLING VALVES DESCRIPTION OF OPERATIONS 4 PATENTED PISTON 5 STANDARD DN50 DN50 / PN10 125A 6 TRI-CLAMP EASY CLEAN DN50 / PN10 125TC
Welding All assembly welds are full penetration. All welds are crevice and undercut free. Weld finish & detail drawings available upon request.
Single element sanitary liquid housing Designed specifically for the food & beverage and pharmaceutical industries Sanitary triclamp body closure as standard STANDARD product Sanitary surface finish Triclamp
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
SMS DIN spojke. Food DIN / SMS Couplings. procesna oprema
procesna oprema aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding SMS DIN spojke Food DIN / SMS Couplings SMS FOOD COUPLINGS
SANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR A - AS SERIES SELF-PRIMING PUMPS. Series A-AS
SANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR SERIES A - AS SELF-PRIMING PUMPS Series A-AS CSF INOX SPA PREFACE AND WARNING This publication does not constitute a contract proposal or
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
Operating instructions - Translation of the original -
Operating instructions - Translation of the original - KIESELMANN GmbH Paul-Kieselmann-Str.4-10 D - 75438 Knittlingen +49 (0) 7043 371-0 Fax: +49 (0) 7043 371-125 www.kieselmann.de sales@kieselmann.de
VALV Diaphragm Valves 2015
VALV Diaphragm Valves 2015 VALV Diaphragm Valves Benchmark for quality, precision and reliability Flexibility, professionalism, quality - "High Mech" by VALV A special feature of VALV aseptic valve bodies
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
kysimply Unique Single Seat
. kysimply Unique Single Seat Unique SSV Tangential General Information The Unique Single Seat Valve is an innovative new generation that are designed to meet the highest process demands of hygiene and
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
Operating instruction
Translation of the original Operating instruction Butterfly valve P D F a k 1 6 / 0 2 / 2 0 1 8 ENGLISH EN K I E S E L M A N N G m b H Paul-Kieselmann-Str. 4-10 75438 Knittlingen ( +49(0) 7043 371-0 7
Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
NEUMO ASEPTIC TECHNOLOGY
A member of NEUMO Ehrenberg Group NEUMO ASEPTIC TECHNOLOGY STAINLESS SOLUTIONS FOR LIFE CONTENTS About NEUMO... 00 Company Portrait... 00.01 ConnectS... 01 Introduction...01.01 Flange Connection...01.02
Accessories, Universal
Accessories, Universal Examples Material Media pressure Insulating material Cleaning Marking Stainless steel, W1.4404/AISI 316 L PN16 PEEK SIP and CIP A mark or a leak hole indicates the fi nal gland or
Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation
Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation Zero deadleg monoblock without welds Diaphragm hermetically separates the fluids from the operating mechanism Easy integration
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Pig-cleaning systems. for food stuffs industry beverage industry pharmaceutical industry cosmetic industry
Pig-cleaning systems for food stuffs industry beverage industry pharmaceutical industry cosmetic industry Pig cleaning system Your competitive advantage in the production process. KIESEL offers solutions
SVL488 Stainless Steel Safety Valve for Clean Service Applications
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
butterfly valves high performance Ruamcharoen Engineering And Supplies Ltp., Tel : Fax :
high performance EXECUTION OFFSET FROM CENTRE OF VALVE OFFSET FROM CENTRE OF SEAT VALVE CENTRE LINE SHAFT CENTRE LINE Valve body is solid, heavy duty. Seat Retainer construction allows Gasket conforming
GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
Thermowell For sanitary applications Model TW22
Thermowells Thermowell For sanitary applications Model TW22 WIKA data sheet TW 95.22 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry, production of active
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
In-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
LATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
STANDARD SHAFT SEALS SC
STANDARD SHAFT SEALS SC DESCRIPTION The SC profile is a shaft seal composed of a single metal cage with a rubber coating and a primary lip with integrated spring. ADVANTAGES Very good static sealing Very
SITRANS T measuring instruments for temperature
for installation in pipelines and tanks Overview The resistance thermometer is designed for installation in tanks and pipelines as well as for the measurement of temperature with hygiene requirements.
Valve Technology DIN EN Butterfly Valves
Armaturenwerk Hötensleben GmbH Valve Technology DIN EN 14432 Butterfly Valves A member of NEUMO Ehrenberg Group Edition 3.0 Proven Valves for all Purpose ATEX Directive 2014/34/EU Armaturenwerk Hötensleben
PISTON DIVERTER VALVES
DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles