Diaphragm Valve, Metal
|
|
- Karin King
- 5 years ago
- Views:
Transcription
1 Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The valve has an integrated optical position indicator as standard. GEMÜ is also available without a metal distance piece for applications with lower operating temperatures (only diaphragm size ). Features Suitable for inert and corrosive* liquid and gaseous media The motor will withstand being stalled under full voltage Valve body and diaphragm available in various materials and designs Suitable for use as a control valve (with integrated control module) Insensitive to particulate media Advantages Direct 0/4-20 ma signal processing (with integrated control module) Opening and closing behaviour is independent of the operating pressure Hermetic separation between medium and actuator Optional flow direction, will seal in either flow direction up to full operating pressure Optional mounting position *see information on working medium on page 2 Sectional drawing
2 Technical data Working medium Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and chemical properties of the body and diaphragm material. Medium temperature Direct mount + 60 C With distance piece C Protection class IP 65 acc. to DIN Operating time See actuator version (page 4) approx. 17 or 45 s Ambient conditions Ambient temperature -15 to +55 C Load resistor 32 Ω Electrical data Power supply Uv = 24 V 50/60 Hz +/- % Uv = 120 V 50/60 Hz +/- % Uv = 230 V 50/60 Hz +/- % Power consumption Rating 3.5 VA Continuously rated Electrical connection 2 x PG 13.5 (Versions AE, AP) 2 x round connector (Binder series 717) (Versions E1, E2, E3) Diaphragm size Operating pressure Weight [bar] All pressures are gauge pressures. Operating pressure values were determined with static operating pressure applied on one side of a closed valve. Sealing at the valve seat and atmospheric sealing is ensured for the given values. Information on operating pressures applied on both sides and for high purity media on request. [g] MG DN DIN 0 DIN 1150 Series 1 16 Kv values [m³/h] DIN 1150 Series 2 17 DIN 1150 Series 3 1 SMS ASME BPE EN ISO Kv values determined acc. to IEC 534 standard, inlet pressure 6 bar, p 1 bar, stainless steel valve body and soft elastomer diaphragm. MG = diaphragm size 2
3 Order data Body configuration Tank valve body B** 2/2-way body D Multi-port design M** T body T* * For dimensions see T Valves brochure ** Dimensions and versions on request or according to customer requirements Connection Butt weld spigots Spigots DIN 0 Spigots DIN 1150, series 1 16 Spigots DIN 1150, series 2 17 Spigots DIN 1150, series 3 1 Spigots DIN 1166, series A 1A Spigots DIN 1166, series B 1B Spigots JIS-G Spigots BS 425, Part 1 55 Spigots ASME BPE 59 Spigots EN ISO Spigots ANSI/ASME B36.19M, Schedule s 63 Spigots ANSI/ASME B36.19M, Schedule 40s 65 Threaded connections Threaded sockets DIN ISO 22 1 Threaded spigots DIN One side threaded spigot, other side cone spigot and union nut, DIN Aseptic unions on request Clamp connections Clamps ASME BPE for pipe ASME BPE, short design 0 Clamps following ASME BPE for pipe EN ISO 1127, length EN 55, series 7 2 Clamps ASME BPE for pipe ASME BPE, length EN 55, series 7 Clamps DIN for pipe DIN 1150, length EN 55, series 7 A For overview of available valve bodies for GEMÜ see page 7 Valve body material MS, brass BN2 (CF3M), investment casting Fe<0.5% (ASTM A 351 CF3M 316L), investment casting (316L), forged body (BN2), forged body Fe<0.5% (316L), block material 41* (BN2), block material Fe<0.5% 43* * only for body configurations B, M and T Diaphragm material FPM 4 4A** EPDM max. 130 C* 12 - EPDM max. 150 C* 13 3A** EPDM max. 150 C* 16 6A** EPDM max. 150 C* 17 17** PTFE/EPDM, PTFE laminated max. 150 C* 52 5A** * Steam sterilisation temperature (valid for actuator version B0 and B1 - see page 4) ** for diaphragm size complies with FDA requirements, except codes 4, 4A Supply voltage/mains frequency 24 V 50/60 Hz C4 120 V 50/60 Hz G4 230 V 50/60 Hz L4 Functional module OPEN / CLOSE control AE with additional end position feedback (signal voltage = supply voltage) OPEN / CLOSE control AP with potentiometer output Control of valve position, E1 actual value control inside the actuator by potentiometer set value external, 0 - V Control of valve position, E2 actual value control inside the actuator by potentiometer set value external, 0/4-20 ma Control of process variables, E3 actual value external, 0/4-20 ma, set value external, 0/4-20 ma Order example D L4 AE 1516 A0 Type Nominal size* Body configuration (code) D Connection (code) 60 Valve body material (code) 34 Diaphragm material (code) 13 Supply voltage/mains frequency (code) L4 Functional module (code) AE Surface finish ( see top of page 4) 1516 Actuator version ( see top of page 4) * Diaphragm size : Always state the nominal size in the range DN A0 3
4 Valve body surface finish, internal contour Ra 6.3 µm blasted internal/external 1500* Ra 6.3 µm electropolished internal/external 1509* Ra 0. µm mechanically polished internal, blasted external 1502 Ra 0. µm electropolished internal/external 1503 Ra 0.6 µm mechanically polished internal, blasted external 1507 Ra 0.6 µm electropolished internal/external 150 Ra 0.4 µm mechanically polished internal, blasted external 1536 Ra 0.4 µm electropolished internal/external 1537 Ra 0.25 µm mechanically polished internal, blasted external 1527 Ra 0.25 µm electropolished internal/external 1516 Ra acc. to DIN 476; at defined reference points * only investment cast design The available internal surface finishes are dependent on the inside diameter and the body production procedure. Actuator version Operating time 17 sec. (not possible for diaphragm size ) Operating time 45 sec. (not possible for diaphragm size ) Operating time 17 sec., with distance piece Operating time 45 sec., with distance piece A0 A1 B0 B1 Actuator dimensions [mm] Diaphragm size DN Actuator version A A B0, B Actuator version B0, B1 with metal distance piece for max. 130 C Diaphragm size DN Actuator version A A1-20 A0, A B0, B Actuator version A0, A1 for max. 60 C Actuator version B0, B1 with metal distance piece for max. 130 C 4
5 Body dimensions [mm] Butt weld spigots, connection code 0, 16, 17, 1, 1A, 1B, 60 Valve body material: Investment casting (code 34), forged body (code 40) DIN Series 0 0 DIN 1150 Series 1 16 DIN 1150 Series 2 17 DIN 1150 Series 3 1 DIN 1166 Series A 1A DIN 1166 Series B 1B EN ISO MG DN NPS f* øg* L LS H1* H1** ød s ød s ød s ød s ød s ød s ød s / / / / / / * only for investment cast design ** only for forged design MG = diaphragm size For materials see overview on page 7 Butt weld spigots, connection code 36, 55, 59, 63, 65 Valve body material: Investment casting (code 34), forged body (code 40) JIS-G BS ASME BPE 59 ANSI/ASME B36.19M s 63 ANSI/ASME B36.19M 40s 65 MG DN NPS f* øg* L LS H1* H1** ød s ød s ød s ød s ød s / / / / / / * only for investment cast design ** only for forged design MG = diaphragm size For materials see overview on page 7 5
6 Body dimensions [mm] Threaded sockets, connection code 1 Valve body material: Brass (code 12), investment casting (code 34) MG DN G H H1 t code 12 L code 34 code 12 SW code 34 Number of flats 00 G1/ G3/ G1/ For materials see overview on page 7 MG = diaphragm size Threaded connections, connection code 6, 62 Valve body material: Investment casting (code 34), forged body (code 40) MG DN H1* f* øg* ød1* Thread to DIN 405 G 6 L Rd 2 x 1/ L Rd 2 x 1/ Rd 34 x 1/ * only for investment cast design ** only for forged design MG = diaphragm size For materials see overview on page Clamp connections, connection code 0, 2,, A Valve body material: Forged body (code 40), block material (code 41) for pipe ASME BPE code 0 for pipe EN ISO for pipe ASME BPE code for pipe DIN 1150 A MG DN NPS H1 ød1 ød3 L ød1 ød3 L ød1 ød3 L ød1 ød3 L 00 1/ / / / / / MG = diaphragm size For materials see overview on page 7 6
7 Connection code code MG DN Threaded connections Overview of valve bodies for GEMÜ Spigots Clamps A 1B A X X X X X X X X X X X X X X X X X X X X X X X X X - V - V W W W W - - X X X X X X X - - X X X X V W X X X X V - - W W W W W - - X X X X X X X X X - X - X X X X X - - K - - K 12 X X X X W W W W X X X X X X X X X X X X X - X X X X X K - W - K K X X X X K K - X Standard K Connections completely machined (not welded) in material code 40 V Block material W Welded construction MG = diaphragm size Availability of material code 32 same as code 34; code 42 same as code 40; code 43 same as code 41 Connection diagram - Functional module code AE Connection diagram - Functional module code AP open Synchronous motor closed open Synchronous motor closed With an integral potentiometer, wiring of switches S1 + S2 on terminals 5 - is not necessary. Actual value potentiometer linear open closed N PE brown black blue brown black blue open closed N PE green yellow red The voltage of the end position feedback must be identical with the supply voltage of the actuator. 7
8 Connection diagram - Functional module code E1 Connection diagram - Functional module code E2 Fixing screw Actuator Fixing screw Actuator Connector plug (mating connector) with terminal screws Mains mains 1: L *1) 2: N 3: n.c. 4: n.c. 5: PE Signal signal 1: n.c. 2: n.c. 3: U-, GND/ 0V to pin 4 4: U+, 0-V DC signal 5: n.c. Mounting plug in the actuator Connector plug (mating connector) with terminal screws Mains mains Signal signal Mounting plug in the actuator 5: PE Ext. set value 3: I-, GND/ 0V to pin 4 } } Ext. set value 1: L *1) 2: N 3: n.c. 4: n.c. 1: n.c. 2: n.c. 4: I+, 4-20mA signal 5: n.c. Technical data sheet Housing bolts (2) and (3) of connector plug Valve body (diagrammatic view) Housing bolts (2) and (3) of connector plug Valve body (diagrammatic view) Connection diagram - Functional module code E3 Characteristic progress with functional module E2 or 3-point controller 123 Actuator Fixing screw Connector plug (mating connector) with terminal screws Mains mains 1: L *1) 2: N 3: n.c. 4: n.c. 5: PE Signal signal 1: I-, GND/ 0V to pin 2 2: I+, 4-20mA signal 3: I-, GND/ 0V to pin 4 4: I+, 4-20mA signal 5: n.c. } Mounting plug in the actuator Ext. actual value } Ext. set value Housing bolts (2) and (3) of connector plug Valve body (diagrammatic view) For further metal diaphragm valves, accessories and other products, please see our Product Range catalogue and Price List. Contact GEMÜ. Opening point *1) For the supply voltage (mains) check the details on the product label (24, 120, or 230 VAC). N.C. = (not connected) Medium: Water p: 1 bar Subject to alteration 11/ GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG Fritz-Müller-Str. 6- D Ingelfingen-Criesbach Telefon +49(0) 7940/123-0 Telefax +49(0) 7940/ info@gemue.de
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
More information653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
More informationTank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationControl Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request
Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More informationButterfly Valve, Metal
Butterfly Valve, Metal Construction The motorized GEMÜ 2/2 way butterfly valve has a low maintenance electrical actuator with a powerful reversible DC motor. The secondary gear in the motor, consisting
More informationGEMÜ 649 esydrive Motorized diaphragm valve
esydrive Motorized diaphragm valve Features Hermetic separation between medium and actuator Installation for an optimised draining is possible Open/close function, positioner and process controller Variable
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationGEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More information555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic
Angle Seat Globe Valve, Metal Aseptic Construction The GEMÜ 555 pneumatically operated 2/2-way valve has a piston actuator and is designed for pure steam applications. The valve has a PTFE seat for tight
More information2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationControl valve BioStar control
Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationDiaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More information2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
More informationGEMÜ 539 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More information550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal
Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More information790, 791, 797, 798. Ball valve, metal
Ball valve, metal Construction GEMÜ 790, 791, 797 and 798 are 3-piece 2/2-way ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8-100). This flange enables both pneumatic and electric actuators
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More informationSolenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
More informationFull Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More informationK715, 711, 728, 751. Ball Valve, Stainless steel
Ball Valve, Stainless steel Construction GEMÜ 711, 728 and 751 are 3-piece 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). The top flange enables both
More informationGlobe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More information/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic
Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
More informationButterfly valve, Metal
Butterfly valve, Metal Construction The GEMÜ VICTORIA is a wafer pattern butterfly valve with an elastomer liner. It is available in nominal sizes DN 50-600 and in various body versions such as Wafer,
More informationGEMÜ sterile sampling systems
GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,
More informationBall Valve, Metal - Sanitary
all Valve, Metal - Sanitary Construction GEMÜ 740, 741 and 748 are 3-piece 2/2-way metal ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). They are particularly suitable for sanitary/hygienic
More informationGlobe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationGlobe Control Valve, Metal
Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
More informationFlowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media
More informationM600 Multi-Port Valves for Sterile Applications
M600 Multi-Port Valves for Sterile Applications Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationFlowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
More informationPneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
More information2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25
2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero
More informationGEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
More informationGEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100
2/2-way Diaphragm Valve, forged valve body, weld end and clamp, DN 8-100 Type 2031 with weld end Type 2031 can be combined with Type 2031 with clamp Hermetical separation of fluids from the operating mechanism
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationPneumatically operated 2/2 way diaphragm valve with stainless steel actuator
Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Flow optimized and deadleg free stainless steel cast or forged bodies Media separation with different diaphragm materials Trusted
More informationPneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationTandem valve, welded valve configuration
Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation
More informationT EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve
T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼
More informationButterfly Valve, Metal
utterfly Valve, Metal Construction GEMÜ type D480 is a butterfly valve with various versions. It is available in nominal sizes DN 25 1600, various body versions (Wafer, Lug and U section) and in a large
More informationkyalfa Laval Unique DV-ST UltraPure
kyalfa Laval Unique DV-ST UltraPure Simply Unique Diaphragm Valves Concept The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation The valve consist of a
More informationkysimply Unique Diaphragm Valves
. kysimply Unique Diaphragm Valves Unique DV-ST UltraPure Application Alfa Laval Unique diaphragm valves offer a complete range covering every need, for use in sterile and ultra-hygienic processes. The
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading worldwide Industrial and Process Valve manufacturer, supplying customers in the Pharmaceutical,
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
More informationDiaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet
Diaphragm Valve Sterile Process Engineering PN 16 DN 6- Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed,
More informationDiaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet
Diaphragm Valve SISTO-C Sterile Process Engineering PN 16 DN 6- Type Series Booklet Legal information/copyright Type Series Booklet SISTO-C All rights reserved. The contents provided herein must neither
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationButterfly Valve Metal
Butterfly Valve Metal Construction The GEMÜ 490 butterfly valve is lined with TFM (PTFE)/PFA to suit aggressive chemical applications. It is based on the design of concentric soft seal valves. The construction
More informationStainless Steel Diaphragm Valves for Aseptic and Sterile Applications
Stainless Steel Diaphragm Valves for Aseptic and Sterile Applications Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of
More informationYour first choice in valve technology
Your first choice in valve technology Facts and figures GEMÜ an international successful family owned enterprise, based in the Hohenlohe area, the strongest region of Baden-Württemberg, South Germany over
More informationIntelligent Positioner
Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.
More informationSolenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationOrder Code for GEA Tuchenhagen VESTA Sampling Valves. Typ H_A/I 2/2 Way Seat Valve
Order Code for VESTA Sampling Valves Typ H_A/I 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment The VESTA sampling valve is used for aseptic product sampling from pipes or tanks.
More informationGuth modulating valves. The sophisticated solution
Guth modulating valves The sophisticated solution VSR-modulating valves with diaphragm actuator Modulating valves are used in process technology to control process parameters such as temperature, pressure
More information