Solenoid valve, Metal

Transcription

1 Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve with soft seal. It is servo assisted. The electrical connection is made via a plug to IN EN form. Features Filtered, lubricated or oil-free compressed air is a suitable working medium The valve is suitable for the control of double acting pneumatic cylinders and diaphragm actuators or other pneumatic actuators In order to achieve the maximum possible reliability and service life it is advisable to prepare the working medium using a lubricator and filter regulator dvantages Optional mounting position Standard manual override Battery mounting with common air inlet is possible The coil can be replaced without removing the valve body from the pipeline Technically advanced and proven construction Body dimensions GEÜ [mm] Handhilfsbetätigung anual override 2 L N P T G H U S 4 R E K J F N E F G H J K G / G / L N P R S T U , , , ,

2 Technical data Working medium Filtered, lubricated or unlubricated compressed air which has no negative impact on the physical and chemical properties of the body and seal material. Perm. temp. of working medium -0 C to +50 C in. differential pressure Δ P bar Protection class IP 65 Ex version upon request Rating Continuously rated Switching time N 4 approx. 20 ms Power consumption.c. operation: N 4 (solenoid 052) N 7 (solenoid 0).C. operation: N 4 (solenoid 052) N 7 (solenoid 0) 8.5 V 4.9 V 4.8 W 2.7 W N 7 approx. 27 ms Nominal size Plug size Operating pressure K v value Weight N IN EN [bar] [m³/h] [kg] 4 esign B (GEÜ 052) esign (GEÜ 0) Wiring note: Special wiring on request. When using electronic switches and additional wiring, carefully design out any potential residual currents upon installation. Operating solenoids with plug to IN EN , esigns and B N 4 / 052 / esign B N 7 / 0 / esign , ,5 Ø9 Ø9 Solenoid order no. Power consumption 24 V C 24 V C (50 Hz) 0 (design ) 2.7 W 4.9 V 052 (design B) 4.8 W 8.5 V Protection class IP 65 2

3 Order data Body configuration ulti-way Connection Threaded sockets IN ISO 228 Supply voltage 24 V 24 0 V 0 20 V 20 Valve body material luminium (l) 4 Seal material Perbunan (NBR) 2 Operating/Reset Solenoid / ir spring ains frequency Voltage / Frequency availability 50 Hz 50 C C C voltage 24 V C, 0 V C, 20 V C 50 Hz C voltage 24 V C, 0 V C - Further voltages and ex-solenoids upon request. Order example Type Nominal size 4 Body configuration (code) Connection (code) Valve body material (code) 4 Seal material (code) 2 Operating/Reset (code) Voltage (code) 20 Frequency (code) 50

4 Interlinking system Pressure shut off or pressure connection plate Fastening screws for valve Threaded pin Blanking plate Sealing cap for separate air supply Station designation Interlinking plate (for pressure switch 8 ) Interlinking pin Intermediate plate (without thread) End plate (with thread) Parameters (interlinking without valves) esignation N 4 N 7 Weight [g] Order no. Weight [g] Order no. End plate complete (with thread) Intermediate plate complete (without thread) Interlinking plate complete (for pressure switch 8) Pressure shut-off plate complete (for valve mounting when pressure is applied) Pressure connection plate complete (for separate air supply) Interlinking for 2 valves Interlinking for valves Interlinking for 4 valves Interlinking for 5 valves Interlinking for 6 valves Interlinking for 7 valves Interlinking for 8 valves Interlinking for 9 valves Interlinking for 0 valves Interlinking for valves Interlinking for 2 valves Blanking plate complete Threaded plug Seal for threaded plug Sealing plug (for separate air supply) The interlinking plates are available as single plates (unassembled) and as multiple interlinking plates (assembled). Fastening screws for valves are included with the interlinking plates. Single rail for pressure supply upon request Order example Order no.. a) Interlinking for valves (assembled) b) 2 end plates. 2x intermediate plate (unassembled)

5 imensions [mm] Interlinking system N 4 SW (nzugsmoment,6 Nm) SW (torque.6 Nm) G/ , tief 26 L 2,5 22 Order no. for n-valves L Order no. for n-valves L Interlinking system N 7 SW (nzugsmoment,6 Nm) SW (torque.6 Nm) 4,5 0,5 56 6,6 88,5,5 G/8 2 tief L 8 27 Order no. for n-valves L Order no. for n-valves L

6 imensions [mm] Pressure connection plate 8 Pressure connection plate SW E 2,5 Pressure inlet B B C E Order no. B C E F G G / G / Pressure shut-off plate C G F Pressure shut off screw SW B Order no. N B C E ,5 8.5 G / ,0 2.0 G /4 C Further pilot valves, metal GEÜ 857 /2-way metal pilot valve, servo assisted, aluminium N 6 (.0-0 bar) GEÜ 80 /2-way metal pilot valve, directly controlled, brass or stainless steel, N 2 (.0-0 bar) Should there be any doubts or misunderstandings, the German version of this data sheet is the authoritative document! Technical data sheet Order no. N B C For further metal solenoid valves, accessories and other products, please see our Product Range catalogue and Price List. Contact GEÜ. GEÜ 8506 /2 and 5/2 metal pilot valve, servo assisted, aluminium N 6 ( bar) Subject to alteration 07/ VLVES, ESUREENT N CONTROL SYSTES GEÜ Gebr. üller pparatebau GmbH & Co. KG Fritz-üller-Str Ingelfingen-Criesbach Tel. +49(0) 7940/2-0 Telefax +49(0) 7940/2-224 info@gemue.de