Control Valve, Plastic/Metal

Size: px
Start display at page:

Download "Control Valve, Plastic/Metal"

Transcription

1 Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally closed control function (NC). Features Suitable for inert and corrosive* liquid and gaseous media Valve body and isolating diaphragm are available in various materials Hermetic separation between medium and actuator The control valve can only be operated with an electro-pneumatic positioner or process controller. irect or remote mounting of a positioner (GEMÜ 1434, 1435, 1436) is required. Versions according to TEX on request *see information on working medium on page 2 Sectional drawing Travel sensor for remote mounting of positioners or process controllers

2 Technical data Working medium Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and chemical properties of the body and seal material. Media temperature: Plastic valve body: see table below Metal valve body: 8 C Control medium Inert gases Max. perm. temperature of control medium 7 C Filling volume: ctuator size 1T2 ctuator size 1T3.31 dm³.31 dm³ mbient conditions mbient temperature - to +55 C For limitations see table Pressure/temperature correlation Operating pressure [bar] Control pressure [bar] Weight [kg] with plastic body Weight [kg] with metal body * *for actuator size 1T2 ll pressures are gauge pressures. PVC and PVF valve bodies are only suitable up to PN 6, stainless steel valve bodies up to PN 1. Maximum permissible seat leakage class Seat seal Standard Test procedure Leakage rate Test medium FPM, EPM IN EN VI air Pressure / temperature correlation for plastic (PN 6) Temperature in C plastic body -2-1 ± Valve body material Permissible operating pressure in bar PVC-U PVF ata for extended temperature ranges on request. Please note that the ambient temperature and medium temperature generate a combined temperature at the valve body which must not exceed the above values. imensions Travel sensor for remote mounting of positioners or process controllers M16x G 1/4 ø 7 2

3 Order data ody configuration 2/2-way body Control function Normally closed (NC) 1 Connection Threaded connections Threaded sockets IN ISO Threaded spigots IN Union ends with IN insert (socket) 7 Clamp connections Clamps IN series for pipe IN 1185, length EN 558, series 1 86 Valve body material PVC-U, grey / Regulating cone PEEK 1 PVF / Regulating cone PEEK (STM 351 CF3M) investment casting* 34 * Material equivalency 316 L Isolating diaphragm material FPM 4 EPM 14 ctuator size ctuator size N 3 / 6 / 1 1T2 ctuator size N 1T3 Control characteristic Kvs values / control characteristic / equal-percentage * / equal-percentage * / equal-percentage C* / linear * / linear E* * see diagrams page 4 Kvs value see page 4 Kvs values: Tolerance ± 1% Order example T2 4 Type Nominal size 6 ody configuration (code) Connection (code) 1 Valve body material (code) 1 Isolating diaphragm material (code) 14 Control function (code) 1 ctuator size (code) 1T2 Control characteristic (code) Kvs value 4 In order to configure a complete control valve the pneumatically operated basic valve must be paired with an electro-pneumatic positioner. The GEMÜ 1434, 1435 and 1436 positioners and process controllers can be used for this purpose. You will find below two configuration examples of a complete valve. Configuration example for a GEMÜ control valve with directly mounted 1434 positioner GEMÜ type Order key GEMÜ T3 25 GEMÜ 1434 positioner 1434 Z Mounting kit for direct mounting of positioner 1434S1Z3421 ir connector kit 144 ZKS GEMÜ 1219 cable plug M Z G M M125 Configuration example for a GEMÜ control valve with remotely mounted 1434 positioner GEMÜ type Order key GEMÜ T3 25 GEMÜ 1434 positioner 1434 Z Travel sensor for remote mounting 4232 Z M Mounting kit for remote mounting 4232 S1 Z GEMÜ 1219 cable plug M Z G M M125 3

4 Kvs values [l/h] Characteristics N 3 (seat) 63 1 C 16 1 Characteristics N 6 (seat) 25 4 C E C C E Characteristics N 1 (seat) Characteristics N (seat)

5 ody dimensions [mm] Threaded sockets - IN ISO 228 Connection code 1 Valve body material code 1, 2, 34 N (seat) G 3 G 3/8 6 G 3/8 1 G 3/8 G 1/2 Union ends Connection code 7 Valve body material code 1 N G ø ød L L 3 G 3/ G 3/ G 3/ G G G d L L Threaded spigots - IN Connection code 6 Valve body material code 34 Clamps Connection code 86 Valve body material code 34 Rd 34 x 1/8 IN Mounting dimensions M5 4 5

6 Overview of valve bodies for GEMÜ Connection code Material code N 3 X X X X X X N 6 X X X X X X N 1 X X X X X X N X X X X X X Control valves Technical data sheet GEMÜ Control valve with directly mounted positioner GEMÜ 563 Plastic design Motorized Other positioners GEMÜ 568 Metal design Motorized Should there be any doubts or misunderstandings, the German version of this data sheet is the authoritative document! GEMÜ 1436 cpos Electro-pneumatic positioner GEMÜ 1435 epos Electro-pneumatic positioner For further globe valves, accessories and other products, please see our Product Range catalogue and Price List. Contact GEMÜ. Subject to alteration 12/ VLVES, MESUREMENT N CONTROL SYSTEMS GEMÜ Gebr.Müller pparatebau GmbH & Co.KG Fritz-Müller-Str Ingelfingen-Criesbach Telefon +49()794/123- Telefax +49()794/ info@gemue.de

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position

More information

Globe Valve, Metal. Sectional drawing

Globe Valve, Metal. Sectional drawing Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the

More information

Control Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request

Control Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*

More information

600, 630. Diaphragm Valve, Plastic

600, 630. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,

More information

SilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal

SilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,

More information

Diaphragm valve, Plastic

Diaphragm valve, Plastic Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable

More information

Globe Valve, Metal. Sectional view

Globe Valve, Metal. Sectional view Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the

More information

Globe Control Valve, Metal

Globe Control Valve, Metal Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the

More information

N086, N186, N786. Pressure retaining valve, Plastic

N086, N186, N786. Pressure retaining valve, Plastic Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing

More information

R690. Diaphragm Valve, Plastic

R690. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double

More information

555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic

555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic Angle Seat Globe Valve, Metal Aseptic Construction The GEMÜ 555 pneumatically operated 2/2-way valve has a piston actuator and is designed for pure steam applications. The valve has a PTFE seat for tight

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical

More information

R677. Diaphragm Valve, Plastic

R677. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert

More information

Angle Seat Globe Control Valve, Metal

Angle Seat Globe Control Valve, Metal Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

410, 417, 423. Butterfly valve, Plastic

410, 417, 423. Butterfly valve, Plastic Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

Solenoid Valve, Plastic

Solenoid Valve, Plastic Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

Tank Bottom Valve, Metal

Tank Bottom Valve, Metal Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve

More information

550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal

550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

710, 717, 723. Ball Valve, Plastic

710, 717, 723. Ball Valve, Plastic Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

Control valve BioStar control

Control valve BioStar control Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending

More information

GEMÜ 205 Electrically operated solenoid valve

GEMÜ 205 Electrically operated solenoid valve Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

653, 654. Diaphragm Valve, Metal

653, 654. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature

More information

GEMÜ ADH, ADP, MSC, RC0 Accessories for quarter turn valves

GEMÜ ADH, ADP, MSC, RC0 Accessories for quarter turn valves GEMÜ H, P, MSC, RC0 ccessories for quarter turn valves Mounting sleeves Mounting sleeve, square geometry SW actuator SW shaft Mounting sleeve, star-shaped geometry SW actuator SW shaft Length Länge Length

More information

650TL. Diaphragm Valve, Metal. Special version "TL"

650TL. Diaphragm Valve, Metal. Special version TL Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm

More information

650TL. Diaphragm Valve, Metal. Special version "TL"

650TL. Diaphragm Valve, Metal. Special version TL Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve

More information

GEMÜ R680 Motorized diaphragm valve

GEMÜ R680 Motorized diaphragm valve Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The

More information

Solenoid valve, Metal

Solenoid valve, Metal Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting

More information

Butterfly Valve, Metal

Butterfly Valve, Metal Butterfly Valve, Metal Construction The motorized GEMÜ 2/2 way butterfly valve has a low maintenance electrical actuator with a powerful reversible DC motor. The secondary gear in the motor, consisting

More information

Full Bore Diaphragm Valve, Metal

Full Bore Diaphragm Valve, Metal Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable

More information

790, 791, 797, 798. Ball valve, metal

790, 791, 797, 798. Ball valve, metal Ball valve, metal Construction GEMÜ 790, 791, 797 and 798 are 3-piece 2/2-way ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8-100). This flange enables both pneumatic and electric actuators

More information

Flowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885

Flowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885 Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media

More information

Flowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing

Flowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*

More information

K715, 711, 728, 751. Ball Valve, Stainless steel

K715, 711, 728, 751. Ball Valve, Stainless steel Ball Valve, Stainless steel Construction GEMÜ 711, 728 and 751 are 3-piece 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). The top flange enables both

More information

0322, 0324, Pilot Solenoid Valve, Plastic

0322, 0324, Pilot Solenoid Valve, Plastic Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made

More information

Diaphragm Valve, Plastic

Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,

More information

GEMÜ 549 esydrive Motorized globe valve

GEMÜ 549 esydrive Motorized globe valve esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via

More information

GEMÜ 539 esydrive Motorized globe valve

GEMÜ 539 esydrive Motorized globe valve esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating

More information

Diaphragm Valve, Plastic 2/2 way, motorized

Diaphragm Valve, Plastic 2/2 way, motorized Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features

More information

/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic

/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*

More information

Ball Valve, Metal - Sanitary

Ball Valve, Metal - Sanitary all Valve, Metal - Sanitary Construction GEMÜ 740, 741 and 748 are 3-piece 2/2-way metal ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). They are particularly suitable for sanitary/hygienic

More information

GEMÜ 717 Manually operated ball valve

GEMÜ 717 Manually operated ball valve Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The

More information

Butterfly valve, Metal

Butterfly valve, Metal Butterfly valve, Metal Construction The GEMÜ VICTORIA is a wafer pattern butterfly valve with an elastomer liner. It is available in nominal sizes DN 50-600 and in various body versions such as Wafer,

More information

Right Angle Control Valve 7051

Right Angle Control Valve 7051 Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium

More information

DR/SC. Quarter Turn Actuator, pneumatically operated

DR/SC. Quarter Turn Actuator, pneumatically operated Quarter Turn Actuator, pneumatically operated Construction The pneumatic quarter turn actuators operate according to the double piston rack and pinion principle. Double acting or single acting versions

More information

Butterfly valves Plastic and Metal

Butterfly valves Plastic and Metal Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement

More information

Valves, Measurement and Control Systems

Valves, Measurement and Control Systems Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading worldwide Industrial and Process Valve manufacturer, supplying customers in the Pharmaceutical,

More information

2/2-Way and T Valve Bodies in Stainless Steel

2/2-Way and T Valve Bodies in Stainless Steel 2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and

More information

Butterfly valves Plastic and Metal

Butterfly valves Plastic and Metal Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz

More information

GEMÜ 710 Pneumatically operated ball valve

GEMÜ 710 Pneumatically operated ball valve Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or

More information

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

More information

Valves, Measurement and Control Systems

Valves, Measurement and Control Systems Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems.

More information

Intelligent Positioner

Intelligent Positioner Intelligent Positioner Construction The digital electro-pneumatic positioner detects the valve position with an external long life travel sensor. It possesses a solid housing with protected operating keys.

More information

GEMÜ 649 esydrive Motorized diaphragm valve

GEMÜ 649 esydrive Motorized diaphragm valve esydrive Motorized diaphragm valve Features Hermetic separation between medium and actuator Installation for an optimised draining is possible Open/close function, positioner and process controller Variable

More information

Butterfly Valve, Metal

Butterfly Valve, Metal utterfly Valve, Metal Construction GEMÜ type D480 is a butterfly valve with various versions. It is available in nominal sizes DN 25 1600, various body versions (Wafer, Lug and U section) and in a large

More information

Butterfly Valve Metal

Butterfly Valve Metal Butterfly Valve Metal Construction The GEMÜ 490 butterfly valve is lined with TFM (PTFE)/PFA to suit aggressive chemical applications. It is based on the design of concentric soft seal valves. The construction

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator

More information

GEMÜ sterile sampling systems

GEMÜ sterile sampling systems GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,

More information

Product Range Valves, Measurement and Control Systems

Product Range Valves, Measurement and Control Systems Product Range Valves, Measurement and Control Systems Innovative technology The GEMÜ Group is a leading manufacturer of valves, measurement and control systems employing over 1700 members of staff worldwide.

More information

Membranventil Kunststoff, DN Diaphragm Valve Plastic, DN GEMÜ 600 Antriebsgröße Code 2-4 Actuator size Code 2-4

Membranventil Kunststoff, DN Diaphragm Valve Plastic, DN GEMÜ 600 Antriebsgröße Code 2-4 Actuator size Code 2-4 Membranventil Kunststoff, DN - 50 Diaphragm Valve Plastic, DN - 50 DE GB ORIGINAL EINBAU- UND MONTAGEANLEITUNG INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS GEMÜ 600 Antriebsgröße Code -4 Actuator

More information

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency

More information

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL. CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which

More information

Angle Seat Control Valve 7020

Angle Seat Control Valve 7020 Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid

More information

Maxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R

Maxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Maxifluss Rotary Plug Valve VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN 25

More information

Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50

Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50 Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications

More information

GVI Series Industrial Globe Valves for Flow Control

GVI Series Industrial Globe Valves for Flow Control Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They

More information

Valves, Measurement and Control Systems

Valves, Measurement and Control Systems Valves, Measurement and Control Systems Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves,

More information

Data Sheet T EN

Data Sheet T EN Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN

More information

Ball valve C 200 PROP / C 200 DOS

Ball valve C 200 PROP / C 200 DOS Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C

More information

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

Two port valves. pneumatically actuated

Two port valves. pneumatically actuated Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use

More information

Ball valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value

Ball valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed

More information

Your first choice in valve technology

Your first choice in valve technology Your first choice in valve technology Facts and figures GEMÜ an international successful family owned enterprise, based in the Hohenlohe area, the strongest region of Baden-Württemberg, South Germany over

More information

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50 /- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

More information

Diaphragm Valve MV 309

Diaphragm Valve MV 309 Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial

More information

Maxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT

Maxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN

More information

Control Valve with integrated positioner

Control Valve with integrated positioner Control Valve 8021 with integrated positioner GS 1 series DN 15 up to DN 150 Pneumatic control valve for the control of neutral through to highly aggressive media in process engineering, chemical industries

More information