Angle Seat Globe Valve, Metal
|
|
- Dwayne Warren
- 6 years ago
- Views:
Transcription
1 Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a selfadjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. The wiper ring fitted in front of the gland packing protects the seal against contamination and damage. Features Substantially reduced installation dimensions when using the body with male threads which can be removed using union nuts Suitable for high working temperatures and pressures Control medium connection can be rotated through 3 Advantages Various valve body connections: threaded sockets, threaded spigots, butt weld spigots Good flow capability due to angle seat design Extensive range of accessories Actuator dimensions (mm) ø B e M 6x M 6x M x M x F Installation dimensions see page 3. * Connection only for actuators, 2 and, c.f. 2 and 3
2 Technical data Working medium Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and chemical properties of the body and seal material. Max. perm. pressure of working medium see table Max. perm. temp. of working medium C (standard) Other designs for higher temperatures upon request Control medium Inert gases Max. control pressure: 0,, 3, 4: bar 2 and : 8 bar Max. perm. temperature of control medium: C Filling volume 0 and 3: 0.0 Nl and 4: 0. NI Actuator : NI Actuator 2: 0.6 NI Flow direction and weight See top of page 3 Nominal size Max. working pressure (bar) control function * Min. control pressure control function K v value (mm) Act. 0 piston ø mm Act. 3 piston ø mm Act. piston ø 70 mm Act. 4 Act. Act. 2 Actuator Actuator piston piston piston ø 70 mm ø 0 mm ø mm Actuator Actuator Actuator Actuator * It should be noted that cast bronze valve bodies, when in pipe systems according to DIN, are only suitable up to PN 6 max., stainless steel bodies up to PN. All pressures are given as gauge pressures. Min. control pressure for actuators 3 and 4 depends on working pressure. min. control pressure see diagram max. control pressure bar min. control pressure see diagram max. control pressure bar (m 3 /h) Control pressure characteristic actuator 3 Control pressure characteristic actuator 4 Min. control pressure depending on working pressure Min. control pressure depending on working pressure Control pressure in bar Control pressure in bar Working pressure in bar Working pressure in bar 2
3 Order data Body configuration 2/2 way body D Seal material PTFE Connections Butt weld spigots Spigots DIN 0 Spigots DIN 8, Reihe 6 Spigots DIN 8, Reihe 2 7 Spigots DIN 8, Reihe 3 8 Spigots SMS Spigots ASME BPE Spigots EN ISO 27 Threaded connections Threaded sockets DIN ISO 8 Threaded spigots DIN ISO 8 Threaded sockets NPT 3 Valve body material Cast bronze RG.443 (36 L) Investment casting Investment casting 37 Control function Normally closed Normally open 2* Double acting 3* * not with piston ø mm Actuator size Actuator 0 ^= ø mm Flow under the plug 0* Actuator ^= ø 70 mm Flow under the plug * Actuator 2 ^= ø mm Flow under the plug 2* Actuator ^= ø 0 mm Flow under the plug * Actuator 3 ^= ø mm Flow over the plug 3 Actuator 4 ^= ø 70 mm Flow over the plug 4 * Preferred flow direction with incompressible liquid media to avoid "water hammer" Order example Type Nominal size Body configuration (code) Connection (code) Valve body material (code) Seal material (code) Control function (code) Actuator size (code) D D 3
4 Flow direction Installation dimensions (mm) GEMÜ 0,, 2, GEMÜ 3, 4 * Connection only for actuators, 2 and, c.f. 2 and 3 Actuator size Installation dimensions (mm) 0 and 3 and 4 2 Material code DN SW H/LA H/LA H/LA H/LA 34, 37 34, 37 34, 37 34, 37 34, Nominal size Weight (kg) (mm) Actuator Actuator
5 Connection code DN LS LB Body dimensions Butt weld spigots Material code 34, 37 (mm) 0* ø d s ø d s ø d s ø d s ø d s ø d s ø d s LS LB * Connection code 0 only possible with material code 34. DN L LB G t SW2 t SW2 Body dimensions Threaded sockets DIN Connection code (mm) G /2 G 3/4 6.3 G G /4 2.4 G /2 2.4 G 2.7 G 2 /2 24 G octagon octagon. Body dimensions Threaded sockets NPT Connection code 3, material code (mm) Material code DN G L LB t SW2 /2 NPT 3/4 NPT NPT /4 NPT /2 NPT 2 NPT
6 Body dimensions Threaded spigots Connection code, material code, 37 (mm) DN L LB I G G 3/4 G G /4 G /2 G 3/4 G 2 3/8 G 3 G 3 /2 Technisches Datenblatt Material code Connection code DN DN DN DN DN DN DN DN RG ( ) 3 Overview of metal bodies for GEMÜ.48 ( 37) Weitere Sitzventile, Zubehör und andere Produkte siehe Erzeugnisprogramm und Preisliste. Nehmen Sie Kontakt mit uns auf..443 ( 34) Should there be any doubts or misunderstandings, the German version of this data sheet is the authoritative document! Änderungen vorbehalten 0/ UNTERNEHMENSBEREICH VENTIL, MESS UND REGELSYSTEME GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG FritzMüllerStr. 68 D743 IngelfingenCriesbach Telefon +4 (0) 7/2 Telefax +4 (0) 7/232 info@gemue.de
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
More informationGlobe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More information555 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal Aseptic
Angle Seat Globe Valve, Metal Aseptic Construction The GEMÜ 555 pneumatically operated 2/2-way valve has a piston actuator and is designed for pure steam applications. The valve has a PTFE seat for tight
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationAngle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More informationGlobe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More information550 Connection code 80 / Valve body material code C2. Angle Seat Globe Valve, Metal
Angle Seat lobe Valve, Metal Construction The EMÜ pneumatically operated / way angle seat globe valve has a low maintenance piston actuator. The valve spindle is sealed by a self-adjusting gland packing
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More information/ 855 / 857 / 861 / / 870 / 875 / 880 / 885. Variable Area Flowmeter, Plastic
Variable Area Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in PA transparent or Polysulphone suitable for inert or corrosive*
More informationTank Bottom Valve, Metal
Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationFlowmeter, Plastic 855 / 857 / 865 / / 875 / 880 / 885
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and, suitable for corrosive* media
More informationButterfly Valve, Metal
Butterfly Valve, Metal Construction The motorized GEMÜ 2/2 way butterfly valve has a low maintenance electrical actuator with a powerful reversible DC motor. The secondary gear in the motor, consisting
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More informationFlowmeter, Plastic 805 / 807 / 815 / / 825 / 832 / 835. Sectional drawing
Flowmeter, Plastic Construction The flowmeter operates according to the variable area principle. Metering tubes are available in TrogamidT, suitable for inert media, and polysulfone, suitable for corrosive*
More informationGlobe Control Valve, Metal
Globe Control Valve, Metal Construction The GEMÜ /-way globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos positioners or the
More informationControl Valve, Metal. Options Versions according to ATEX for manual and pneumatic operation on request
Control Valve, Metal Construction The GEMÜ 2/2-way control valve has a body with an integrated control mechanism which can be controlled by various operator types. Features Suitable for inert and corrosive*
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More information653, 654. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More information650TL. Diaphragm Valve, Metal. Special version "TL"
Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationControl valve BioStar control
Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending
More informationGEMÜ 549 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More informationDiaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More information790, 791, 797, 798. Ball valve, metal
Ball valve, metal Construction GEMÜ 790, 791, 797 and 798 are 3-piece 2/2-way ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8-100). This flange enables both pneumatic and electric actuators
More informationFull Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
More informationK715, 711, 728, 751. Ball Valve, Stainless steel
Ball Valve, Stainless steel Construction GEMÜ 711, 728 and 751 are 3-piece 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). The top flange enables both
More informationSolenoid Valve, Plastic
Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationBall Valve, Metal - Sanitary
all Valve, Metal - Sanitary Construction GEMÜ 740, 741 and 748 are 3-piece 2/2-way metal ball valves with top flange EN ISO 5211 in sizes 1/4 to 4 (DN 8 to DN 100). They are particularly suitable for sanitary/hygienic
More informationGEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
More informationGEMÜ 539 esydrive Motorized globe valve
esydrive Motorized globe valve Features Linear or modified equal-percentage control characteristics High flow rates Force and speed are variably adjustable Extensive diagnostic facilities Operable via
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ 1 µpos is a digital electro-pneumatic positioner for process valve control. Designed for simple, safe and quick use with valves with strokes < mm. The positioner,
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationValves, Measurement and Control Systems
Valves, Measurement and Control Systems VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading worldwide Industrial and Process Valve manufacturer, supplying customers in the Pharmaceutical,
More informationSolenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
More informationGEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationButterfly valve, Metal
Butterfly valve, Metal Construction The GEMÜ VICTORIA is a wafer pattern butterfly valve with an elastomer liner. It is available in nominal sizes DN 50-600 and in various body versions such as Wafer,
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
More information2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and
More informationType Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
More informationType 2000, Operating Instructions. Bedienungsanleitung Manuel d utilisation
2/2 way angle seat valve, 3/2 way globe valve 2/2-Wege-Schrägsitzventil, 3/2-Wege-Geradsitzventil Vanne à siège incliné 2/2 voies, vanne à siège droit 3/2 voies Operating Instructions Bedienungsanleitung
More informationGEMÜ sterile sampling systems
GEMÜ sterile sampling systems safe, reliable, durable www.gemu-group.com Sterile sampling systems On the safe side with GEMÜ Hygienic design GEMÜ valve bodies made out of 1.4435 stainless steel, electropolished,
More informationPF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationDR/SC. Quarter Turn Actuator, pneumatically operated
Quarter Turn Actuator, pneumatically operated Construction The pneumatic quarter turn actuators operate according to the double piston rack and pinion principle. Double acting or single acting versions
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationGEMÜ 649 esydrive Motorized diaphragm valve
esydrive Motorized diaphragm valve Features Hermetic separation between medium and actuator Installation for an optimised draining is possible Open/close function, positioner and process controller Variable
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
More informationButterfly valves Plastic and Metal
Butterfly valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationButterfly Valve, Metal
utterfly Valve, Metal Construction GEMÜ type D480 is a butterfly valve with various versions. It is available in nominal sizes DN 25 1600, various body versions (Wafer, Lug and U section) and in a large
More informationElectrical position indicators and combi switchboxes for linear and quarter turn valves
Electrical position indicators and combi switchboxes for linear and quarter turn valves VALVES, MEASUREMENT AND CONTROL SYSTEMS Instrumentation and accessories Position indicators and combi switchboxes
More information3/2-Way Valve DN 15 up to DN 40
3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly
More informationMembranventil Kunststoff, DN Diaphragm Valve Plastic, DN GEMÜ 600 Antriebsgröße Code 2-4 Actuator size Code 2-4
Membranventil Kunststoff, DN - 50 Diaphragm Valve Plastic, DN - 50 DE GB ORIGINAL EINBAU- UND MONTAGEANLEITUNG INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS GEMÜ 600 Antriebsgröße Code -4 Actuator
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationAngle Seat Valve SV 300
Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and
More informationButterfly Valve Metal
Butterfly Valve Metal Construction The GEMÜ 490 butterfly valve is lined with TFM (PTFE)/PFA to suit aggressive chemical applications. It is based on the design of concentric soft seal valves. The construction
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More informationScrew-in Thermocouples
TT30..39 s Application Thermocouples are suited for direct temperature measurement of gaseous and liquid media. The applications of the measuring inserts are not limited to the specified thermocouples.
More informationMaxifluss Rotary Plug Valve. VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT
Maxifluss Rotary Plug Valve VETEC-Type 72.1/AT, Type 72.3/AT and Type 72.4/AT Application Double eccentric control valve for process engineering and plants with industrial requirements Nominal size DN
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationGEMÜ ADH, ADP, MSC, RC0 Accessories for quarter turn valves
GEMÜ H, P, MSC, RC0 ccessories for quarter turn valves Mounting sleeves Mounting sleeve, square geometry SW actuator SW shaft Mounting sleeve, star-shaped geometry SW actuator SW shaft Length Länge Length
More informationYour first choice in valve technology
Your first choice in valve technology Facts and figures GEMÜ an international successful family owned enterprise, based in the Hohenlohe area, the strongest region of Baden-Württemberg, South Germany over
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More information