Pneumatically operated zero dead volume T-Valve CLASSIC

Size: px
Start display at page:

Download "Pneumatically operated zero dead volume T-Valve CLASSIC"

Transcription

1 Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular accessory range Stainless steel body Quality certifications FDA/3A Type 2032 can be combined with Type 3234 Type 8697 Feedback unit Type 6012 Plunger valve For process valves with decentralized automation see ELEMENT Type 2104 The Burkert Zero Deadleg T Valve is designed for control of ultra pure, sterile, aggressive or abrasive fluids. Enables especially optimal sampling, draining or diverting of critical process fluids. The valve body is machined from a single piece of block material (monoblock no weld seam). The high quality diaphragms separate hermetically critical fluids from the actuator. The pneumatic actuator can be controlled by pneumatic pilot valves (single pilot valves, valve islandsand control heads). Control function A, normally closed by spring return. Technical data Orifice DN Body materials Stainless steel / 316 L Stainless steel BN2 / ASME BPE Fe < 0.5% / C 0.03% Diaphragm materials EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU), Gylon /EPDM laminated (ER), FKM (FF) Actuator materials PPS, PA Pilot air ports Stainless steel Surface finish (others on request) inside mechanical polished inside electro polished Medium temperature EPDM (AD) PTFE/EPDM (EA) PTFE/EPDM (EU) GYLON /EPDM laminated (ER) FKM (FF) Ambient temperature Actuator size < 100 mm Actuator size mm Actuator size 175 mm Control medium Ra 0,5 μm (ASME BPE SF1) (external Ra 1.6 µm) Ra 0,38 μm (ASME BPE SF4 / DIN HE4) (external Ra 1.6 µm) -10 to +143 C (steam sterilisation +150 C for 60 min) -10 to +130 C (steam sterilisation +140 C for 60 min) -5 to +143 C (steam sterilisation +150 C for 60 min) -5 to +130 C (steam sterilisation +140 C for 60 min) 0 to +130 C (not recommended for steam) +5 to +140 C +5 to +90 C (briefly up to +140 C) -10 to +50 C Neutral gases; air Pilot pressure max. max. 7 bar, see table on p. 2 Content Valve specifications System spec. On/Off CLASSIC Request for quotation Type 2032 Type 8801-TA Type 8801-TA Technical data & ordering info. p. 1-8 Ordering info. & technical data p p /13

2 Technical data, continued Port connections Weld end acc. to Clamp acc. to Installation for selfdraining operation EN ISO 1127 / ISO 4200, DIN Series 0 to 3, SMS 3008, ASME BPE, BS 4825 ISO 2852, ASME BPE, DIN Actuator inclined 3 to 5 downwards Orifice DN diaphragm Actuator size Ø Kv-value water Pilot pressure Max. operating pressure (medium) for seal material [mm] [mm] [m 3 /h] [bar] EPDM, FKM [bar] 4/ PTFE/EPDM, advanced PTFE/EPDM [bar] Approvals Suitability for foodstuffs / sterile applications The composition of the EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU) and GYLON /EPDM laminated (ER) diaphragms corresponds to the Code of Federal Regulations, published by the FDA (Food and Drug Administration, USA). The composition of the EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU) and GYLON /EPDM laminated (ER) diaphragms is suitable for the application with food and beverage (acc. to EC-Regulation 1935/2004/ EC) The composition of the EPDM (AD), PTFE/EPDM (EA), advanced PTFE/EPDM (EU) and GYLON /EPDM laminated (ER) diaphragms are approved acc. USP Class VI Approval according to TA-air (Port size DN4-50) 2/13

3 Materials Polysulfon (PSU) PPS, PA Stainless steel FKM, NBR with PA actuator Sinter metal guide Stainless steel 316L EPDM (AD), PTFE/EPDM (EA), advanced PTFE/ EPDM (EU), Gylon /EPDM laminated (ER), FKM (FF) Stainless steel 316L/1.4435/BN2/ASME BPE Fe < 0,5% Example of available diaphragm materials Developed to handle the unique challenges of hygienic and sterile applications, Bürkert offers diaphragms with precise material formula and physical tolerances. Bürkert diaphragms are available in a wide range of materials which have been proven in food & beverage, biotechnology, pharmaceutical and cosmetic industry applications. Diaphragms are tested during development and production to ensure reliability in critical processing environments. EPDM (AD) PTFE/EPDM (EA) advanced PTFE/EPDM (EU) FKM (FF) Gylon /EPDM laminated (ER) 3/13

4 Dimensions [mm] Welded body acc. to EN ISO 1127/ISO 4200 J K G H s2 ød2 I L For all actuators Orifice Actuator size J K L A B C F E Orifice Actuator ød2 s2 A B C E F G H I size Ø / / / / / /13

5 Dimensions [mm], continued Welded body acc. to ASME BPE J K G H s2 ød2 I L For all actuators Orifice Actuator size J K L A B C F E Orifice Actuator ød2 s2 A B C E F G H I size Ø 15 50/ / / / / /13

6 Dimensions [mm], continued Welded body acc. to DIN Series 0 and 2 K G H I L For all actuators Orifice Actuator size J K L J s2 ød A B C F E Orifice Actuator ød2 s2 A B C E F G H I size Ø Series / / / Series / / / / / /13

7 Dimensions [mm], continued Welded body acc. to SMS 3008 J K G H s2 ød2 I L For all actuators Orifice Actuator size J K L A B C F E Orifice Actuator ød2 s2 A B C E F G H I size Ø 25 63/ / / /13

8 Dimensions [mm], continued Clamp body A s ØD3 E ASME BPE Orifice A s D3 E [mm] [inch] 08 1/ / / / / / DIN series A (DIN pipe) Orifice [mm] A s D3 E DIN series B (ISO pipe) Orifice [mm] A s D3 E SMS Orifice [mm] A s D3 E /13

9 System On/Off CLASSIC 8801-TA Ordering information for valve system On/Off CLASSIC Type 8801-TA An T-valve Type 2031 can be combined with the feedback Type 8697 to form a valve system On/Off CLASSIC. The valve system On/Off CLASSIC is composed of: a feedback Type 8697 (see separate datasheet) an diaphragm valve Type 2032 (see separate datasheet) For the configuration of further valve systems please use the Request for quotation on p You order two components and receive a complete assembled and certified valve. T-valve Type 2032 Feedback Type 8697 Electrical position feedback Valve System On/Off CLASSIC Type 8801-DB-U Type 8697 Actuator size 40 to 225 The position feedback Type 8697 is designed for integrated mounting on CLASSIC series 20XX process valves suiting the requirements of hygienic process environment Mechanical or inductive limit switches register the position of the valve. Features Compact design LED position indicator Mechanical or inductive limit switches for end position registering Easy to clean chemically resistant housing featuring IP65 / IP67, 4X Rating Optional intrinsically safe version acc. to ATEX Benefits Easy and quick installation High level of signal reliability thanks to self adjusting limit switches Signal safety through the automatic adjustment of the limit switches Minimised space requirement in the plant piping for more flexibilty in plant design Click on the orange box More info you will come to our website for the resp. product where you can download the data sheet. p. 9/13

10 System On/Off CLASSIC 8801-TA Dimensions for valve system On/Off Classic Type 8801-TA [mm] Dimensions valve system On/Off Classic Type 8803-TA with electrical position feedback Type 8697 Welded body Clamp body HM HM Port Connection [mm] Actuator size ø [mm] Welde end EN ISO 1127/ ISO 4200 HM [mm] Welde end ASME BPE Weld end DIN Reihe 0 u. 2 Weld end SMS 3008 Clamp p. 10/13

11 System On/Off CLASSIC 8801-TA Valve system On/Off Classic Type 8801-TA/8803-TA request for quotation Please fill out and send to your nearest Bürkert facility* with your inquiry or order Company Contact person Customer no. Address Postcode/town Department Tel./Fax = mandatory fields to fill out Quantity Required delivery date Operating data Pipe dimensions Main tube x Clamp main tube Outlet tube ød2 x s2 Clamp outlet Pipe material Surface finish Ra int. Process medium Type of media Liquid Steam Gas nominal unit Flow rate (Q, QN, W) 1) Temperature at valve inlet T1 Absolute pressure at valve inlet P1 1) standard unit: Absolute pressure at valve outlet P2 Liquid Q = m 3 /h; Steam W = kg/h; Steam pressure Pv Gas Qn = nm 3 /h Valve features Specification key automatically transferred from last page go to page Automation unit features Click on the orange box More info you will come to our website for the resp. product where you can download the data sheet. Electrical position feedback Type 8697 For actuator size 40 to 225 LED position indicator Mechanical or inductive limit switches for end position registering Housing with IP65/IP67, 4X rating protection Optional intrinsically safe version acc. to ATEX / IECEx Position feedback switches Micro switch 24V DC Micro switch V DC/AC Inductive switch 3-wire PNP Inductive switch 2-wire NAMUR Inductive switch 2-wire 24V DC Number of Position feedback switches 2x Electrical connection Cable gland M12 connector (applicable only with inductive switch 3-wire PNP) Approval ATEX cat. 3GD, IECEx ATEX cat. 2DG, IECEx without p. 11/13

12 System On/Off CLASSIC 8801-TA Valve system On/Off Classic Type 8801-TA/8803-TA request for quotation, continued Valve accessories Pilot valve Pilot valve Power supply Please specify Article no. if known: Stroke limitation Stroke limitation Min./max. stroke limitation, with visual position indicator Max. stroke limitation, without visual position indicator Please specify Article no. if known: Certifications Attestation of compliance with the order EN-ISO (Article no ) Test report EN-ISO (Article no ) Certification of Conformity for Raw Material EN-ISO (included in delivery) FDA - USP certificate Comment / sketch p. 12/13

13 System On/Off CLASSIC 8801-TA Valve features Example Specification key Please make a choice CONTROL FUNCTION A B I normally closed by spring action normally open by spring action double acting DIAPHRAGM SIZE DIAPHRAGM MATERIAL AD EPDM EA PTFE/EPDM EU advanced PTFE/EPDM ER Gylon /EPDM laminiert FF FKM A 15 AD B VH SA42 SA42 D E NO19 + NO14 VARIABLE CODES Surface finish external - clamped Ra 1.6 µm standard NO19 mechanical polished Ra 1.6 µm NO02 mechanical polished Ra 0.76 µm NO28 electro polished Ra 1.6 µm NO15 electro polished Ra 0.76 µm Surface finish, internal NO14 mechanical polished Ra 0.5 µm (ASME BPE SF1) standard NO06 mechanical polished Ra 0.76 µm (ASME BPE SF3 / DIN H2) NO17 electro polished Ra 0.38 µm (ASME BPE SF4 / DIN HE4) standard NO16 electro polished Ra 0.6 µm (ASME BPE SF6) Certificate NK Certificate PRODUCTION OF BODY B Monoblock BODY MATERIAL VH /AISI 316L VI BN2/ASME BPE main tube connection ød2 outlet tube connection ACTUATOR SIZE 1) C ø 40 mm D ø 50 mm E ø 63 mm F ø 80 mm G ø 100 mm H ø 125 mm K ø 175 mm L ø 225 mm 1) for technical spec. see table, page 2 ACTUATOR MATERIAL C PA (for actuator sizes ø175/225 mm) D PPS Orifice DIN EN ISO 1127 ISO 4200 DIN series B SMS 3008 DIN series 0 DIN series 1 DIN EN series B DIN series 2 DIN series A DIN EN series A DIN series 3 BS 4825 ASME BPE DIN series C DN 4 SC40-6.0x1.0 DN 6 1/8 SA x1.6 SC41-8.0x1.0 SA x0.56 DN 8 1/4 SA x1.6 SC x1.0 SODB x1.2 SA x0.89 DN 10 3/8 SA x1.6 SF x1.0 SD x1.5 SE x2.0 SODC x1.2 SA x0.89 DN 15 1/2 SA x1.6 SC x1.5 SF x1.0 SD x1.5 SE x2.0 SODD x1.2 SA x1.65 DN 20 3/4 SA x1.6 SC x1.5 SF x1.0 SD x1.5 SE x2.0 SODE x1.2 SA x1.65 DN 25 1 SA x2.0 SA x1.2 SC x1.5 SF x1.0 SD x1.5 SE x2.0 SODF x1.65 SODF x1.65 DN /4 SA x2.0 SA x1.2 SC x1.5 SF x1.0 SD x1.5 SE x2.0 DN /2 SA x2.0 SA x1.2 SC x1.5 SF x1.0 SD x1.5 SE x2.0 SODH x1.65 SODH x1.65 DN 50 2 SA x2.0 SA x1.2 SC x1.5 SF x1.0 SD x1.5 SE x2.0 SODI x1.65 SODI x1.65 DN /2 SA x2.0 SA x1.6 SD x2.0 SODJ x1.65 SODJ x1.65 DN 80 3 SA x2.3 SA x1.6 SD x2.0 SODK x1.65 SODK x1.65 DN SA x2.3 SA x2.0 SD x2.0 SODL x2.11 SODL x2.11 Orifice Clamp 34.0 DIN DIN ASME BPE BS 4825 similar DIN series B (ISO-tube) Reihe A (DIN-Rohr) Reihe B (ISO-Rohr) Clamp BS Rohr BS DN 8 1/4 TC x1.6 Cl: 34.0 TD x1.0 Cl: 25.0 TC x1.6 Cl: 25.0 TG x0.89 Cl: 25.0 TH x1.2 Cl: 25.0 DN 10 3/8 TC x1.6 Cl: 34.0 TD x1.5 Cl: 34.0 TC x1.6 Cl: 25.0 TG x0.89 Cl: 25.0 TH x1.2 Cl: 25.0 DN 15 1/2 TC x1.6 Cl: 34.0 TD x1.5 Cl: 34.0 TC x1.6 Cl: 50.5 TG x1.65 Cl: 25.0 TH x1.2 Cl: 25.0 DN 20 3/4 TD x1.5 Cl: 34.0 TC x1.6 Cl: 50.5 TG x1.65 Cl: 25.0 TH x1.2 Cl: 25.0 DN 25 1 TD x1.5 Cl: 50.5 TC x2.0 Cl: 50.5 TG x1.65 Cl: 50.5 TG x1.65 Cl: 50.5 DN /2 TD x1.5 Cl: 50.5 TC x2.0 Cl: 64.0 TG x1.65 Cl: 50.5 TG x1.65 Cl: 50.5 DN 50 2 TD x1.5 Cl: 64.0 TC x2.0 Cl: 77.5 TG x1.65 Cl: 64.0 TG x1.65 Cl: 64.0 DN /2 TD x2.0 Cl: 91.0 TC x2.0 Cl: 91.0 TG x1.65 Cl: 77.5 TG x1.65 Cl: 77.5 DN 80 3 TC x2.3 Cl: TG x1.65 Cl: 91.0 TG x1.65 Cl: 91.0 DN TC x2.3 Cl: TG x2.11 Cl: TG x2.11 Cl: In case of special application conditions, please consult for advice. Subject to alteration. Christian Bürkert GmbH & Co. KG 1801/12_EU-en_ p. 13/13

Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation

Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation Zero deadleg monoblock without welds Diaphragm hermetically separates the fluids from the operating mechanism Easy integration

More information

Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator

Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Flow optimized and deadleg free stainless steel cast or forged bodies Media separation with different diaphragm materials Trusted

More information

2/2 way Angle-Seat Valve for medium up to C, DN15-50

2/2 way Angle-Seat Valve for medium up to C, DN15-50 Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves

More information

2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100

2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100 2/2-way Diaphragm Valve, forged valve body, weld end and clamp, DN 8-100 Type 2031 with weld end Type 2031 can be combined with Type 2031 with clamp Hermetical separation of fluids from the operating mechanism

More information

Pneumatic operated 2/2-way Diaphragm Valve

Pneumatic operated 2/2-way Diaphragm Valve Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical

More information

Tandem valve, welded valve configuration

Tandem valve, welded valve configuration Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation

More information

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25

2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above

More information

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65

2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory

More information

2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50

2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design

More information

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50 2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

More information

Pneumatic control unit for decentralized automation of ELEMENT process valves

Pneumatic control unit for decentralized automation of ELEMENT process valves 890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing

More information

Robolux Multiway Multiport Diaphragm Valve, standard product range

Robolux Multiway Multiport Diaphragm Valve, standard product range Robolux Multiway Multiport Diaphragm Valve, standard product range Increased process efficiency Reduced installation costs Reduced number of valves and welds Zero dead volume and no contamination Type

More information

2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port connection DN

2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port connection DN Type 2731 can be combined with... 2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port DN 15-100 Hermetical separation of fluids from the operating mechanism by diaphragm

More information

2/2-way Globe Control Valve, threaded port connection, DN 10-65

2/2-way Globe Control Valve, threaded port connection, DN 10-65 2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal

More information

2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN

2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in

More information

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65

2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65 2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator

More information

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves

Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning

More information

Electrical position feedback for actuator sizes Ø mm

Electrical position feedback for actuator sizes Ø mm Electrical position feedback for actuator sizes Ø 40-125 mm Type 1062 can be combined with Simple installation, convertible or retrofittable Self-adjusting trip cam for closed position LEDs provide local

More information

650TL. Diaphragm Valve, Metal. Special version "TL"

650TL. Diaphragm Valve, Metal. Special version TL Special version "TL" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. This piston actuated diaphragm

More information

Robolux Multiway Multiport Diaphragm valve, standard product range

Robolux Multiway Multiport Diaphragm valve, standard product range Robolux Multiway Multiport Diaphragm valve, standard product range Increased process efficiency Reduced installation costs, minimal place required Reduced number of valves and welds Zero dead volume and

More information

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50

2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe

More information

2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam

2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam cryogenic extended stem 2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam Type 2000 can be combined with Spring return closed or open, double-acting, manual operation Materials:

More information

2/2 way Globe Control Valve, threaded connection, 3/8" 3"

2/2 way Globe Control Valve, threaded connection, 3/8 3 2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent

More information

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50 /- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

More information

Tank Bottom Valve, Metal

Tank Bottom Valve, Metal Tank Bottom Valve, Metal Construction The 2/2-way metal tank bottom valve GEMÜ is manually operated with a side mounted gear which has an optical position indicator as standard. The stainless steel valve

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical

More information

2/2 way Globe Control Valve, flange connection, 1/2" 4"

2/2 way Globe Control Valve, flange connection, 1/2 4 2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent

More information

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65

2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle

More information

Flow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body

Flow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure

More information

Electromotive 2 way diaphragm on/off valve

Electromotive 2 way diaphragm on/off valve Electromotive 2 way diaphragm on/off valve Safety position with energy pack Fast shut off Adjustable force for increased diaphragm lifetime Various diaphragms, stainless steel and plastic bodies available

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The

More information

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +180ºC, DN 13-50

2/2-way Angle-Seat Control Valve with stainless steel design for media up to +180ºC, DN 13-50 2/2-way ngle-seat Valve with stainless steel design for media up to +180ºC, DN 13-50 Excellent control characteristic and high fl ow rates High cycle life Clean design for optimal use in hygienic environment

More information

2/2-way Angle Seat Valve, manually operated, for media up to +180 C

2/2-way Angle Seat Valve, manually operated, for media up to +180 C 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

Flow Controller, flow control system for gases

Flow Controller, flow control system for gases Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined

More information

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics 654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...

More information

Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections

Solenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections /-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation

More information

2/2-way Compact Solenoid Valve, G 1/4 - G 1/2

2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug

More information

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material

Type Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction

More information

650TL. Diaphragm Valve, Metal. Special version "TL"

650TL. Diaphragm Valve, Metal. Special version TL Special version "L" Diaphragm Valve, Metal Construction GEMÜ is a manual tapping valve with automatic closing function which is designed for use in sterile applications. his piston actuated diaphragm valve

More information

kyalfa Laval Unique DV-ST UltraPure

kyalfa Laval Unique DV-ST UltraPure kyalfa Laval Unique DV-ST UltraPure Simply Unique Diaphragm Valves Concept The standard Unique DV-ST UltraPure is designed either for manual operation or for Pneumatic operation The valve consist of a

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled

More information

653, 654. Diaphragm Valve, Metal

653, 654. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ 653 / 654 manually operated 2/2-way metal diaphragm valve has a stainless steel bonnet and is available in two versions - GEMÜ 653 has a handwheel in high temperature

More information

2/2-Way and T Valve Bodies in Stainless Steel

2/2-Way and T Valve Bodies in Stainless Steel 2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

2/2-way Diaphragm Valve with plastic body, pneumatically operated,

2/2-way Diaphragm Valve with plastic body, pneumatically operated, /-way Diaphragm Valve with plastic body, pneumatically operated, - pplications with aggressive media Flow-optimised body with zero dead volume Self-draining installation possible Removable radial true

More information

+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve

+ = Angle-seat Valve System for continuous control. Type 8802/2300 electro-pneumatically operated angle-seat valve Angle-seat Valve System for continuous control Type 8802/2300 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert 8802 continuous control valve + = 2300 series

More information

Angle-Seat Valve System for on/off control. Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system

Angle-Seat Valve System for on/off control. Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Angle-Seat Valve System for on/off control Type 8801/2100 electro-pneumatically operated angle-seat valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8801/2100 + = Type 2100 angle-seat series

More information

Ball Valves in cast 316 SS multi-port, bolted construction

Ball Valves in cast 316 SS multi-port, bolted construction 65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options

More information

kysimply Unique Diaphragm Valves

kysimply Unique Diaphragm Valves . kysimply Unique Diaphragm Valves Unique DV-ST UltraPure Application Alfa Laval Unique diaphragm valves offer a complete range covering every need, for use in sterile and ultra-hygienic processes. The

More information

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.

CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL. CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

Direct-acting 2/2- or 3/2-way pivoted armature valve

Direct-acting 2/2- or 3/2-way pivoted armature valve 0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil

More information

INSERTION flow sensor for continuous flow measurement

INSERTION flow sensor for continuous flow measurement INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)

More information

Flowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve

Flowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve Flowmeter for Gases Thermal mass flow measurement Pipe sizes up to 2" Integrated inlet and outlet pipes for flow conditioning -20mA signal output of process value Type can be combined with... Type 8802-YG

More information

2/2 or 3/2 way direct acting rocker solenoid valve

2/2 or 3/2 way direct acting rocker solenoid valve 2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal

More information

Multi-port Diaphragm Valve, Forged stainless steel body

Multi-port Diaphragm Valve, Forged stainless steel body Fully machined from SS 316L bar-stock no welded components Increased security no internal fabrication welds Reduced dead leg based on orientation Greater structural integrity Fewer fittings, welds and

More information

3/2-way Solenoid Valve for pneumatics

3/2-way Solenoid Valve for pneumatics 656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

More information

Direct-acting 3/2 way plunger valve

Direct-acting 3/2 way plunger valve Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type

More information

Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve

Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ motorized metal diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a reduction gear and cam. The

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN

More information

Globe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system

Globe Valve System for continuous control. Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Globe Valve System for continuous control Type 8802/2301 electro-pneumatically operated globe valve + = TWO YEAR WARRANTY on this valve system Burkert Type 8802/2301 + = Type 2301 Series Globe valve Type

More information

2/2-Way and T Valve Bodies in Stainless Steel

2/2-Way and T Valve Bodies in Stainless Steel 2/2-Way and T Valve Bodies in Stainless Steel Leading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and

More information

Control valve BioStar control

Control valve BioStar control Control valve BioStar control Construction The GEMÜ 567 BioStar control 2/2-way control valve is designed for use in sterile applications. Flow rates ranging from 80 l/h to 4,100 l/h are possible depending

More information

T EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve

T EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve T 8097-3 EN Type 3347/3379 Pneumatic Control Valve Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN 6 to NPS ¼

More information

Diaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet

Diaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet Diaphragm Valve Sterile Process Engineering PN 16 DN 6- Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed,

More information

Diaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet

Diaphragm Valve SISTO-C. Sterile Process Engineering PN 16 DN Type Series Booklet Diaphragm Valve SISTO-C Sterile Process Engineering PN 16 DN 6- Type Series Booklet Legal information/copyright Type Series Booklet SISTO-C All rights reserved. The contents provided herein must neither

More information

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base 3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override

More information

Sterile version and Asepto sampling systems

Sterile version and Asepto sampling systems terile version and Asepto sampling systems Hygienic Processing components... All medium contact materials traceable Component of the BB modular system version uaranteed zero dead volume Fits in BB sterile

More information

2/2- and 3/2-way solenoid valve for aggressive fluids

2/2- and 3/2-way solenoid valve for aggressive fluids 2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm 2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions

More information

Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection

Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3

More information

Electromotive process valve - 2-way angle-seat control valve

Electromotive process valve - 2-way angle-seat control valve Electromotive process valve - 2-way angle-seat control valve good and fast control weather, impact and vibration resistant design easy cleaning by its design according hygienic demands options many diagnostic

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics /2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx

More information

Guth modulating valves. The sophisticated solution

Guth modulating valves. The sophisticated solution Guth modulating valves The sophisticated solution VSR-modulating valves with diaphragm actuator Modulating valves are used in process technology to control process parameters such as temperature, pressure

More information

INSERTION flowmeter with paddle wheel, ELEMENT design

INSERTION flowmeter with paddle wheel, ELEMENT design INSERTION flowmeter with paddle wheel, design Up to PN, size of measurement pipes: DN to DN400 Configurable outputs: one or two transistor output(s) and single or dual 4... ma analog output(s) Removable

More information

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2

2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional

More information

In-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864

In-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864 Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable

More information

Type 2730, 2731, 2731 K DN Operating Instructions. Bedienungsanleitung Manuel d utilisation

Type 2730, 2731, 2731 K DN Operating Instructions. Bedienungsanleitung Manuel d utilisation Type 2730, 2731, 2731 K DN 15-50 Piston controlled diaphragm control valve Kolbengesteuertes Membranregelventil Vanne de réglage à membrane commandée par piston Operating Instructions Bedienungsanleitung

More information

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518

Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518 3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions

More information

Paddle-wheel flow controller for On/Off control

Paddle-wheel flow controller for On/Off control Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:

More information

Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and

Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models , and Pressure Diaphragm seal with sterile connection With clamp connection (Tri-clamp) Models 990.22, 990.52 and 990.53 WIKA data sheet DS 99.41 for further approvals see page 7 Applications Sanitary applications

More information

Process and control valves

Process and control valves System Catalog 2 Solenoid valves I Process and control valves I Pneumatics Sensors I MicroFluidics I MFC and proportional valves The smart choice of Fluid Control Systems All technical details were valid

More information

Order Code for GEA Tuchenhagen VESTA Sampling Valves. Typ H_A/I 2/2 Way Seat Valve

Order Code for GEA Tuchenhagen VESTA Sampling Valves. Typ H_A/I 2/2 Way Seat Valve Order Code for VESTA Sampling Valves Typ H_A/I 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment The VESTA sampling valve is used for aseptic product sampling from pipes or tanks.

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm / or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,

More information

2/2-way Angle Seat Valve, manually operated, for media up to +180 C

2/2-way Angle Seat Valve, manually operated, for media up to +180 C 2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined

More information

Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50

Aseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50 Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications

More information

High-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T

High-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T JUNE 2018 Pressure High-quality pressure sensor with mounted diaphragm seal With clamp connection Model DSS22T WIKA data sheet DS 95.08 TYPE EL Applications Hygienic pressure measurement in sanitary applications

More information

Insertion magnetic inductive flowmeter

Insertion magnetic inductive flowmeter Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041

More information