FOOD COUPLINGS DIN 11851
|
|
|
- Erin Jenkins
- 6 years ago
- Views:
Transcription
1 FOOD COUPLINGS DIN B.3. FEMALE COUPLING WITH SMOOTH HOSE SHANK AND NUT ND Inch For hose Thread nut Weight/pc Reference 15 1/2" 13 RD 34 x 1/8" 0.22 DKV /4" 19 RD 44 x 1/6" 0.28 DKV " 25 RD 52 x 1/6" 0.37 DKV /4" 32 RD 58 x 1/6" 0.44 DKV /2" 38 RD 65 x 1/6" 0.55 DKV /2" 40 RD 65 x 1/6" 0.67 DKV040* 50 2" 50 RD 78 x 1/6" 0.76 DKV /2" 63 RD 95 x 1/6" 1.40 DKV /2" 65 RD 95 x 1/6" 1.46 DKV065* 80 3" 75 RD 110 x 1/4" 1.89 DKV " 80 RD 110 x 1/4" 2.10 DKV080* 100 4" 100 RD 130 x 1/4" 2.89 DKV100 Hose shank standard: EN / DIN 2817 Nut material: stainless steel AISI EN Assembly: RK and RKP safety clamps EN / DIN 2817 or FLEXOLINE safety clamps FOOD COUPLINGS DIN FEMALE COUPLING WITH SERRATED HOSE SHANK AND NUT ND Inch For hose Thread nut Weight/pc Reference 15 1/2" 13 RD 34 x 1/8" 0.14 DKVR /4" 19 RD 44 x 1/6" 0.23 DKVR " 25 RD 52 x 1/6" 0.34 DKVR /4" 32 RD 58 x 1/6" 0.44 DKVR /2" 38 RD 65 x 1/6" 0.56 DKVR /2" 40 RD 65 x 1/6" 0.63 DKVR040* 50 2" 50 RD 78 x 1/6" 0.81 DKVR /2" 63 RD 95 x 1/6" 1.34 DKVR /2" 65 RD 95 x 1/6" 1.37 DKVR065* 80 3" 75 RD 110 x 1/4" 1.62 DKVR " 80 RD 110 x 1/4" 2.27 DKVR080* 100 4" 100 RD 130 x 1/4" 2.91 DKVR100 Nut material: stainless steel AISI EN Assembly: HRRK swage ferrules B.3.5
2 FOOD COUPLINGS DIN COUPLINGS FEMALE COUPLING WITH SMOOTH HOSE SHANK WITHOUT NUT ND Inch For hose Weight/pc Reference mm Kg 15 1/2" DKVS /4" DKVS " DKVS /4" DKVS /2" DKVS /2" DKVS040* 50 2" DKVS /2" DKVS /2" DKVS065* 80 3" DKVS " DKVS080* 100 4" DKVS100 Hose shank standard: EN / DIN 2817 Assembly: RK and RKP safety clamps EN / DIN 2817 or FLEXOLINE safety clamps FEMALE COUPLING WITH SERRATED HOSE SHANK WITHOUT NUT ND Inch For hose Weight/pc Reference mm Kg 15 1/2" DKVSR /4" DKVSR " DKVSR /4" DKVSR /2" DKVSR /2" DKVSR040* 50 2" DKVSR /2" DKVSR /2" DKVSR065* 80 3" DKVSR " DKVSR080* 100 4" DKVSR100 Assembly: HRRK swage ferrules B.3.6
3 FOOD COUPLINGS DIN B.3. MALE COUPLING WITH SMOOTH HOSE SHANK ND Inch For hose Thread Weight/pc Reference 15 1/2" 13 RD 34 x 1/8" 0.10 DKM /4" 19 RD 44 x 1/6" 0.14 DKM " 25 RD 52 x 1/6" 0.24 DKM /4" 32 RD 58 x 1/6" 0.32 DKM /2" 38 RD 65 x 1/6" 0.38 DKM /2" 40 RD 65 x 1/6" 0.40 DKM040* 50 2" 50 RD 78 x 1/6" 0.41 DKM /2" 63 RD 95 x 1/6" 0.89 DKM /2" 65 RD 95 x 1/6" 0.91 DKM065* 80 3" 75 RD 110 x 1/4" 1.35 DKM " 80 RD 110 x 1/4" 1.43 DKM080* 100 4" 100 RD 130 x 1/4" 1.84 DKM100 Hose shank standard: EN / DIN 2817 Assembly: RK and RKP safety clamps EN / DIN 2817 or FLEXOLINE safety clamps Seal: NBR blue included FOOD COUPLINGS DIN MALE COUPLING WITH SERRATED HOSE SHANK ND Inch For hose Thread Weight/pc Reference 15 1/2" 13 RD 34 x 1/8" 0.11 DKMR /4" 19 RD 44 x 1/6" 0.19 DKMR " 25 RD 52 x 1/6" 0.23 DKMR /4" 32 RD 58 x 1/6" 0.28 DKMR /2" 38 RD 65 x 1/6" 0.36 DKMR /2" 40 RD 65 x 1/6" 0.40 DKMR040* 50 2" 50 RD 78 x 1/6" 0.51 DKMR /2" 63 RD 95 x 1/6" 1.10 DKMR /2" 65 RD 95 x 1/6" 1.15 DKMR065* 80 3" 75 RD 110 x 1/4" 1.30 DKMR " 80 RD 110 x 1/4" 1.35 DKMR080* 100 4" 100 RD 130 x 1/4" 1.84 DKMR100 Assembly: HRRK swage ferrules Seal: NBR blue included B.3.7
4 FOOD COUPLINGS DIN COUPLINGS NUT ND Inch Thread OD Ø ID Ø nut Height Weight/pc Reference DIN 405/1 mm mm mm kg 15 1/2" RD 34 x 1/8" DIN /4" RD 44 x 1/6" DIN " RD 52 x 1/6" DIN /4" RD 58 x 1/6" DIN /2" RD 65 x 1/6" DIN " RD 78 x 1/6" DIN /2" RD 95 x 1/6" DIN " RD 104 x 1/6" DIN210075* 80 3" RD 110 x 1/4" DIN " RD 130 x 1/4" DIN Stainless steel AISI EN Stainless steel AISI 316L - EN on request MALE THREADED WELDING COUPLING ND Inch Thread OD welding part ID welding part Weight/pc Reference 15 1/2" RD 34 x 1/8" DIN /4" RD 44 x 1/6" DIN " RD 52 x 1/6" DIN /4" RD 58 x 1/6" DIN /2" RD 65 x 1/6" DIN " RD 78 x 1/6" DIN /2" RD 95 x 1/6" DIN RD 104 x 1/ DIN213075* 80 3" RD 110 x 1/4" DIN " RD 130 x 1/4" DIN Stainless steel AISI EN ; Stainless steel AISI 316L - EN on request Seal not included FEMALE WELDING COUPLING ND Inch OD cone part OD welding part ID welding part Weight/pc Reference mm mm mm kg 15 1/2" DIN /4" DIN " DIN /4" DIN /2" DIN " DIN /2" DIN DIN214075* 80 3" DIN " DIN Stainless steel AISI EN ; Stainless steel AISI 316L - EN on request B.3.8
5 FOOD COUPLINGS DIN 11851G B.3. MALE PLUG ND Inch Thread SW Height Weight/pc Reference 25 1" RD 52 x 1/6" DIN /4" RD 58 x 1/6" DIN /2" RD 65 x 1/6" DIN " RD 78 x 1/6" DIN /2" RD 95 x 1/6" DIN " RD 110 x 1/4" DIN " RD 130 x 1/4" DIN Stainless steel AISI Seal not included FEMALE CAP ND Inch Thread OD Ø Height Weight/pc Reference 15 1/2" RD 34 x 1/8" DIN /4" RD 44 x 1/6" DIN " RD 52 x 1/6" DIN /4" RD 58 x 1/6" DIN /2" RD 65 x 1/6" DIN " RD 78 x 1/6" DIN /2" RD 95 x 1/6" DIN " RD 104 x 1/6" DIN220075* 80 3" RD 110 x 1/4" DIN " RD 130 x 1/4" DIN FOOD COUPLINGS DIN Stainless steel AISI Seal type DIN not included FEMALE CAP WITH BOSS ND Inch Thread OD Ø Height Weight/pc Reference 15 1/2" RD 34 x 1/8" DIN /4" RD 44 x 1/6" DIN " RD 52 x 1/6" DIN /4" RD 58 x 1/6" DIN /2" RD 65 x 1/6" DIN " RD 78 x 1/6" DIN /2" RD 95 x 1/6" DIN " RD 104 x 1/6" DIN221075* 80 3" RD 110 x 1/4" DIN " RD 130 x 1/4" DIN Stainless steel AISI Seal type DIN not included B.3.9
6 FOOD COUPLINGS DIN COUPLINGS U-SHAPE SEAL - NBR ND Inch OD Ø ID Ø Height Weight/pc Reference mm mm mm kg 15 1/2" DIN /4" DIN " DIN /4" DIN /2" DIN " DIN /2" DIN " DIN211075* 80 3" DIN " DIN NBR blue standard, EPDM, FPM H-NBR and MVQ on request available CAP SEAL - NBR ND Inch OD Ø Height Weight/pc Reference mm mm kg 15 1/2" DIN /4" DIN " DIN /4" DIN /2" DIN " DIN /2" DIN " DIN222075* 80 3" DIN " DIN NBR beige standard, other materials on request available ACCESSORIES COUPLINGS CHAIN WITH S-HOOK Lenght Material Weight/pc Reference mm Kg 200 Stainless steel KETR200 B.3.10
FOOD COUPLINGS DIN 11851
FOOD COUPLINGS DIN 11851 B.3. STANDARD Food couplings complying with DIN 11851 are used in the food, chemical and pharmaceutical industries to connect rubber food hoses and stainless steel pipes (in compliance
SMS DIN spojke. Food DIN / SMS Couplings. procesna oprema
procesna oprema aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding SMS DIN spojke Food DIN / SMS Couplings SMS FOOD COUPLINGS
SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.
SCREW HOSE COUPLINGS B.1. STANDARD LMC s screw hose couplings with a smooth hose shank comply with EN 14420-5 / DIN 2817. OPERATION Screw hose couplings are used to connect hoses with male or female BSP,
TW COUPLINGS EN / DIN 28450
TW COUPLINGS EN 14420-6 / DIN 28450 A.4 STANDARD LMC s TW couplings are asymmetric couplings used for the transport of liquids, solids and gases, with the exception of liquefied gas and steam. LMC s TW
DSP COUPLINGS NF S / NF S61-705
DSP COUPLINGS NF S61-704 / NF S61-705 A.3. STANDARD LMC s DSP couplings are manufactured in compliance with NF S61-704 for the dimensions ND 40 and ND 65. The ND 100 dimension is manufactured in compliance
RK SAFETY CLAMPS EN / DIN 2817
STANDARD LMC's RK safety clamps are manufactured in compliance with EN 14420-3 / DIN 2817, and are used to assemble EN/DIN standardized hoses. Threaded-, quick- and flange couplings with a smooth hose
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
THE PERFECT CONNECTION BETWEEN ROTATING HOSES AND STATIONARY PARTS
ROTAPOINT COUPLINGS THE PERFECT CONNECTION BETWEEN ROTATING HOSES AND STATIONARY PARTS ROTAPOINT COUPLINGS WHAT IS A ROTAPOINT COUPLING? The ROTAPOINT swivel prevents torsion in the hose and extends the
Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A
01 SANITARY PIPE FITTING Sanitary Sanitary Pipe Fitting Elbow - SMS - DIN - 3A Tee - SMS - DIN - 3A Reducer - SMS - DIN - 3A 02 FERRULE / UNION / PIPE HOLDER Ferrule End Cap Ferrule Clamp Ferrule Gasket
GLOBAL PRESENCE AND LOGISTIC SUPPORT
CHEMICAL ALFAGOMMA // GLOBAL PRESENCE PROVIDING EXCELLENCE AND RELIABILITY The ALFAGOMMA Group, established in 1956, is a global manufacturer specialized in highly engineered, technically demanding hydraulic
Spare Parts. SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB
Spare Parts SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB2 2002-11 Type SMP-BCA - Stop Valve 2 Reg.: 9805 Intro.: 8605 Type SMP-BCA - Stop Valve 38mm 51mm 63.5mm 76mm 101.6mm Pos. Qty.
The Original Seat Valve
.1 The Original Seat Valve SRC Sanitary Remote-Controlled Valve Application SRC is an air-operated seat valve in a sanitary and flexible design giving a wide field of application, e.g. as a stop valve
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
COUPLINGS. Series Page. Couplings HOSE
COUPLINGS Series Page DRAGON BREATH Steam Female Wing Nut...7610...186 DRAGON BREATH Steam Female Grip Nut...7613...186 DRAGON BREATH Steam Adapters & O-Ring Viton...761...187 Universal Type...7611...188
ASEPTIC-0-RING UNIONS Female Union Union Nut Male Union O-Ring Reduced Female Union Reduced Male Union...
ASEPTIC-0-RING UNIONS Female Union... 68 Union Nut... 69 Male Union... 70 O-Ring... 71 Reduced Female Union... 72 Reduced Male Union... 73 Female Cap... 74 Male Cap... 75 Female Union Female Union Surface
DIN Coupling UNION COMPLETE F ORGED A ND CASTED DIN SKS EN A (DIN R2) Seals
SKS EN 10357-A (DIN 11850-R2) DIN 11851 Coupling The so-called dairy coupling according DIN 11851 is the most applied screw coupling within the food industry. The round thread and the huge tolerances ensure
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
GS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
ARC-SB Aseptic Remote Controlled Valve with Steel Bellows
ARC-SB Aseptic Remote Controlled Valve with Steel Bellows ARC-SB is an air-operated valve which is available as a shut-off or divert valve for aseptic installations. The special design and selected material
Low Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
SÜDMO NEW SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS
SÜDMO SP SERIES - NEW HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD & BEVERAGE INDUSTRY FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC CENTRIFUGAL PUMPS SÜDMO SP SERIES - HYGIENIC CENTRIFUGAL PUMPS FOR THE FOOD
VÁLVULA BOLA BALL VALVE VANNE À BOULE
VANNE À BOULE www.inoxpa.com ÍNDICE / INDEX VÁLVULA BOLA VANNE À BOULE Conexiones / Connections / Connexions: DIN 11850 (Serie2) 4 DIN 11851 5 OD 9 SMS 12 ACCIONAMIENTO MANUAL MANUAL DRIVE COMMANDE MANUELLE
KEYSTONE FIGURE 250D AND 251D HYGIENIC PRODUCTS
Double block and bleed style stainless steel butterfly valves F250D for imperial tubing F251D for metric tubing FEATURES Keystone proven valve and actuator technology Failsafe pneumatic interlocks Fully
The Cleanest Design. SRC Sanitary Remote-Controlled Valve PD US
The Cleanest Design SRC Sanitary Remote-Controlled Valve PD 60019 US8 2001-10 Application SRC is an air-operated seat valve with a sanitary and flexible design giving a wide field of application, e.g.
SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm
PD 6544 GB1 9911 SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm Application SMP-BCA is an aseptic double seat valve with PTFE diaphragm. It is available as a stop- or divert valve. The valve is suited
ARC Aseptic Remote-Controlled Valve with PTFE Diaphragm
ARC Aseptic Remote-Controlled Valve with PTFE Diaphragm PD 65143 GB5 21-1 Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
Build the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
DIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
FPT Applications. Features
FPT 85 Flush Membrane Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The Flush Membrane Transmitter
The Proven Mixproof Range
The Proven Mixproof Range SMP-BC Sanitary Mixproof Valve PD 65373 US4 22-9 Application SMP-BC is a sanitary pneumatic seat valve, designed for safety and leak detection when two different products flow
ACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Safety Clamps
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Safety Clamps General Information Safety clamps EN 14420-3/DIN 2817
Spare Parts LKR-5 Agitator SP70790-GB2 9809
Spare Parts LKR-5 Agitator SP70790-GB2 9809 2 Reg.: 9805 Intro.: 8301 AISI 304 Motor (kw) 1.5 2.2 3 3 5.5 Propel.diameter 200 200 200 300 300 Pos. Qty. Denomination RPM 950 1430 1430 700 950 1 1 Propeller
DIN /DIN Aseptic Screwed Union for ISO 1127 Schedule Pipe
/ Aseptic Screwed Union for ISO 1127 Schedule Pipe / Aseptic Screwed Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
DIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
DIN /DIN Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002
/ Aseptic Unions for BS 4825/ISO 2037/ASME BPE 2002 / Aseptic Screwed Unions This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
kythe Original Aseptic Seat Valve
. kythe Original Aseptic Seat Valve ky Application ARC is an aseptic seat valve with PTFE diaphragm. It is available as a stop- or change-over valve. The valve is suited for aseptic operating conditions
BIS HD 500 and 1501 Heavy Duty Clamps
BIS HD 500 and 1501 Heavy Duty Clamps walraven.com BIS Heavy Duty Clamps Gives strength to your installation! With or without lining The entirely renewed range BIS HD Clamps consists of type HD 1501 (with
Certa-Set Main Line Piping System
Certa-Set Piping System Pipe (includes Couplings, Gaskets (O-rings) and Spline) Class 125 (yellow) Class 100 Emerald (green) Size SDR OD L BOD Min. Wall (lbs./ft.) Length / feet 25 feet 30 feet 40 feet
BALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
SUITABLE FOR. Steam EXAMPLES OF USE APPROVALS. SPECIFICATION Classification society
Overflow and pressure control valves Series 417 6.1 417 Overflow and pressure control valves made of stainless steel, angletype with threaded connections externally adjustable SUITABLE FOR Liquids neutral
CombiTemp Accessories
CombiTemp Accessories Accessories for CombiTemp - the flexible building block system for temperature measurements Housings, standard DIN B and Bourdon-Haenni ø80 mm stainless steel Brackets for wall mounting
Catalogue Easy inside
Catal ogue 2.2010 The complete product range Mini Middle Page 4: Unifix Mini: The small, light and quick repair solution for sealing holes, fractures and porous areas in water-bearing pipes. Suitable for
Product catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
SMS Swedish Standard Union
SMS Swedish Standard Union Swedish standard union incorporates a round slotted nut and features a crevice free flat section seal. The union is suitable for use on permanently fitted sections of pipework
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
HIGH PRESSURE - pumps
Gear pumps TRAE Positive displacement, external gear pumps intended for hydraulic systems of machines and devices. Material Housing Aluminium Mounting plate Aluminium (groups 1 and 2), cast iron (group
QUALITY FIRST.
Guillemin Couplings/French Couplings EN14420-8/ NF E 29572 Guillemin coupling was also raftered to Symmetrical half coupling, or French coupling. The symmetrical design ensure the same ends on both ends
Hyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
INDUSTRIAL FITTINGS - quick release couplings
NiTO 1/2-3/4-1 system - couplings for water Material: Chromium plated brass Working temp.: Up to +80 C Sealing: NBR - cannot be used with fuel and oil (option - Viton). For valve O-ring made of EPDM. High
ASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS
SÜDMO HYGIENIC CENTRIFUGAL PUMPS FOOD & BEVERAGE PROCESS SOLUTIONS HYGIENIC PUMPS SÜDMO HYGIENIC CENTRIFUGAL PUMPS Designed for continuous operation on thin liquids (milk, wine, cream, beer, wort, etc.).
get connected with clamp fittings Bradford Company, Inc
get connected with clamp fittings Bradford Company, Inc. 800.789.78 www.bradfordfittings.com 2 clamp fittings clamps end caps hangers ferrules elbows tees laterals reducers For the right fitting at Your
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
APPENDIX. APPENDIX // Industrial fittings manual. CONNECTION TYPE. WP = 10 bar
Industrial fittings manual INDUSTRIAL FITTINGS MANUAL COMPRESSED AIR EXPRESS NF E 29.573 WP = 10 bar Symmetric coupling system The two symmetrical half-couplings have two claws each, which are connected
Bimetal Thermometers Process Industry Series, Model 55
Mechanical Temperature Measurement Bimetal Thermometers Process Industry Series, Model 55 WIKA Data Sheet TM 55.01 Applications Chemical industry, petrochemical industry, process technology and food industry
EPI Applications. Features
EPI 887 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space
STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2
MidCap Rotary Rake. Illustrated Parts Breakdown
MidCap Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Main Frame Transport Wheel Assembly Lift Arm Assembly Main
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Applications. Benefits
Temperature probes with connection head BINOX Description Sensor Pt Measurement range -50...+400 C Accuracy IEC 751 Class A Measurement current max. 1 ma Connection type 3-wires connection Nominal length
Temperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional
Features. Specification. Tube I.D. (mm) Medium. Material. Ambient temperature. Type MHCBR MHCBF MHCBS
MH* series MIFLD TPE HDLI IDE Features ompact body design keeps overall length to a minimum. ylinder barrel internally honed to ensure smooth and consistent piston movement. High quality materials are
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES
STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES STAINLESS STEEL HOUSINGS WITH CERAMIC MEMBRANES modules in industrial design 52 mm 41 mm 25.4 mm Membrane diameter Membrane design 7/6 19/3.3 37/2 19/6 37/3.8
Electrical Boom Section Valve Modular-Fit / Quick-Fit
Electrical Boom Section Valve Modular-Fit / Quick-Fit The modular construction of altek s valves allows unlimited configuration possibilities for section valves. The variants range from a simple shut off
Ball & Socket Fittings (Bauer Style)
Page 96 Ball & Socket Fittings (Bauer Style) Elbow-Bauer Style 3-1/ * *1 MM 76 89 108 133 159 194 2 300 * Locking Bar (part # 9-7318) for & 1 Lever is Sold Separately 6-9038 6-9039 6-9040 6-9041 6-9042
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL -Thermoplastic level gauges made of transparent polyamide with good mechanical resistance, are compatible with mineral oil, gasoline,
Thermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications Sanitary applications Food industry Beverage industry Bio and pharmaceutical industry,
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
Spare Parts. SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB
Spare Parts SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB5 2002-11 Type SPC-2 (Samson actuator, beige colour) 2 Parts for FEP seal Reg.: 9805 Intro.: 9708 Type SPC-2 (Samson actuator, beige
GEMO UNIONS DIN11851/DIN TUBES AND FITTINGS. DIN11851 Unions All acc. To GERMANY DIN Standard EACH FITTINGS PACKAGING HAS A BARCODE
UNIONS DIN11851/DIN11850 DIN11851 Unions All acc. To GERMANY DIN Standard EA FITTINGS PAKAGING AS A BARODE 43 UNIONS DIN11851/DIN11850 The DIN union is the German standard hygienic fitting, A complete
Nessie Water Mist Nozzles
Data Sheet Nessie Water Mist Nozzles Applications The nozzles are tailored to atomize water in high pressure water mist systems. The nozzles are very suitable for applications within e.g.: Humidification
F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE)
PENTAIR HYGIENIC PROCESS VALVES (FORMERLY KEYSTONE) F269B+ HYGIENIC BALANCED DOUBLE SEAL VALVES REVERSIBLE ACTUATOR TYPE FOOD & BEVERAGE PROCESS SOLUTIONS PROCESS VALVE TECHNOLOGY PENTAIR HYGIENIC PROCESS
QUICK COUPLING M
2018 QUICK COUPLING M42 CONTENTS Quick coupling M42 description...2 Safety cover...3 Male coupling for welding KKV...4 Female coupling for welding KKM...4 Male coupling with hose connection KVS...5 Female
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Couplings, hose clamps and pneumatics
Cejn 310... 79 Cejn 320... 79 Cein 331... 80 Cejn 421... 80 Cejn 223... 81 Cejn 341... 81 Cejn 410... 82 Cejn 550... 82 Cejn 342... 83 Cejn 347... 83 Cejn 220... 84 Cejn 171 (Acetylen)... 84 Cejn 172 (LPG)...
1/4 BSPP. 500 psi / 35 bar) psi / 35 bar) 8 018X XXX 03 X XXX
0186 / 0187 Diaphragm / piston pressure switches up to 250 V with stainless steel housing M.4 Stainless steel housing (AISI 303 / 1.4305) Snap action with silver contacts Overpressure safety up to 4,350
Application Coding Cable diameter Color Part No. Std. Pack Part No. Std. Pack. Female connector. gray black gray black gray black green
Connectors Connector for cables of Ø 6 10 and 10 14 mm With spring clamp connections for rigid cables of 0.5 2.5 mm 2, f fine-stranded cables of 0.5 1.5 mm 2 with ferrules, stranded cables of 0.75 1.5
Long Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
ABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler
1"(Ø56 mm) Technical Information Tank unit / Adapter and Hose unit / Coupler Material Maximum working pressure Test pressure Minimum Burs Pressure uminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160
Hose Clamps and Clips High Performance Hose Clips Sockets Crimping Machine
For hose assembly of fittings different assembly methods from strong clamps to light clips or sockets can be used according to application, medium, pressure or hose material. The necessary method depends
STEEL RANGE RUBBER LINED CLIPS BZP M8/M10 UNLINED CLIPS - BZP M8/M10. Technical characteristics of rubber. Standard Type 2 Screw Fixing.
Full range of BZP pipe clamps, with or without Rubber lining for noise insulation. Sizes available 1/4 n.b. (12 14mm o.d.) 8 n.b. (215mm 225mm o.d.). For heavy duty applications, a wider range of BZP split
Instruction Manual. Keofitt Aseptic Membrane Sampling Valve IM70783-GB
Instruction Manual Keofitt Aseptic Membrane Sampling Valve IM7078-GB 996-06 Table of contents This manual is divided into main sections. - See below. Safety. Important information.... Warning signs....
Delivering powerful solutions.
Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8
BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
Spare Parts MH Koltek Valve SP70735-GB
Spare Parts MH Koltek Valve SP70735-GB5 2000-05 Koltek Valve type MH, MHI and MHE Bearing and lid for bearing 2 Double shutter Reg.: 2000-05 Intro.: 9605 Koltek Valve type MH, MHI and MHE Type MH 25 mm