Spare Parts LKR-5 Agitator SP70790-GB2 9809
|
|
|
- Carmella Fletcher
- 6 years ago
- Views:
Transcription
1 Spare Parts LKR-5 Agitator SP70790-GB2 9809
2 2 Reg.: 9805 Intro.: 8301
3 AISI 304 Motor (kw) Propel.diameter Pos. Qty. Denomination RPM Propeller shaft O-ring EPDM O-ring NBR O-ring FPM Fixing-ring Shaft seal C/Sic. EPDM (Period 9801-) Shaft seal C/Sic. NBR (Period 9801-) Shaft seal C/Sic. FPM (Period 9801-) Shaft seal, NBR, Stationary-ring, Shaft seal, NBR Stationary-ring (AISI 316) (Period -9801) 1 Shaft seal, FPM, Stationary-ring, Front plate O-ring EPDM O-ring NBR O-ring FPM Welding flange Motor console Grease nipple Washer Shrink ring Set screw Pointed screw Lock nut Lock nut Allen screw Hexagon screw Propeller Fibre washer Nut Motor Motor (Period 9401-) Motor (Period -9401) O-ring EPDM O-ring NBR O-ring FPM O-ring NBR Gable gland Direction arrow Cover Cover (Period ) Cover (Period -9401) Fixing clamp a 1 Fixing clamp (Period 9401-) Fixing clamp (Period -9401) Nut Nut Washer Top nut Guard for motor Screw O-ring Alternative 4 1 Shaft seal Sic./Sic. EPDM (Period 9801-) Shaft seal Sic./Sic. NBR (Period 9801-) Shaft seal Sic./Sic. FPM (Period 9801-) Service kit, EPDM Service kit, NBR Service kit, FPM Parts marked with are included in the Service kit. Recommended spare parts: Service kit
4 (Same drawing as on page 2) 4 Reg.: Intro.:
5 AISI 304 Motor (kw) Propel.diameter Pos. Qty. Denomination RPM Propeller shaft O-ring EPDM O-ring NBR O-ring FPM Fixing-ring Shaft seal C/Sic. EPDM (Period 9801-) Shaft seal C/Sic. NBR (Period 9801-) Shaft seal C/Sic. FPM (Period 9801-) Shaft seal, NBR, Stationary-ring, Shaft seal, NBR Stationary-ring (AISI 316) (Period -9801) 1 Shaft seal, FPM, Stationary-ring, Front plate O-ring EPDM O-ring NBR O-ring FPM Welding flange Motor console Grease nipple Washer Shrink ring Set screw... 6 Pointed screw Lock nut Lock nut Allen screw Hexagon screw Propeller Fibre washer Nut Motor Motor (Period 9401-) Motor (Period -9401) O-ring EPDM O-ring NBR O-ring FPM O-ring NBR Gable gland Direction arrow Cover Cover (Period ) Cover (Period -9401) Fixing clamp a 1 Fixing clamp (Period 9401-) Fixing clamp (Period -9401) Nut... 2 Nut Washer Top nut Guard for motor Screw O-ring Alternative 4 1 Shaft seal Sic./Sic. EPDM (Period 9801-) Shaft seal Sic./Sic. NBR (Period 9801-) Shaft seal Sic./Sic. FPM (Period 9801-) Service kit, EPDM Service kit, NBR Service kit, FPM Parts marked with are included in the Service kit.
6 6 Reg.: 9805 Intro.: 8301
7 AISI 316 Motor (kw) Propel.diameter Pos. Qty. Denomination RPM Propeller shaft O-ring EPDM O-ring NBR O-ring FPM Fixing-ring Shaft seal C/Sic. EPDM (Period 9801-) Shaft seal C/Sic. NBR (Period 9801-) Shaft seal C/Sic. FPM (Period 9801-) Shaft seal, NBR, Stationary-ring, Shaft seal, NBR Stationary-ring (AISI 316) (Period -9801) 1 Shaft seal, FPM, Stationary-ring, Front plate O-ring EPDM O-ring NBR O-ring FPM Welding flange Motor console Grease nipple Washer Shrink ring Set screw Pointed screw Lock nut Lock nut Allen screw Hexagon screw Propeller Fibre washer Nut Motor Motor (Period 9401-) Motor (Period -9401) O-ring EPDM O-ring NBR O-ring FPM O-ring NBR Gable gland Direction arrow Cover Cover (Period 9401-) Cover (Period -9401) Fixing clamp a 1 Fixing clamp (Period 9401-) Fixing clamp (Period -9401) Nut Nut Washer Top nut Guard for motor Screw O-ring Alternative 4 1 Shaft seal Sic./Sic. EPDM (Period 9801-) Shaft seal Sic./Sic. NBR (Period 9801-) Shaft seal Sic./Sic. FPM (Period 9801-) Service kit Service kit, NBR Service kit, FPM Parts marked with are included in the Service kit.
8 (Same drawing as on page 6) 8 Reg.: 9805 Intro.: 8301
9 AISI 316 Motor (kw) Propel.diameter Pos. Qty. Denomination RPM Propeller shaft O-ring EPDM O-ring NBR O-ring FPM Fixing-ring Shaft seal C/Sic. EPDM (Period 9801-) Shaft seal C/Sic. NBR (Period 9801-) Shaft seal C/Sic. FPM (Period 9801-) Shaft seal, NBR, Stationary-ring, Shaft seal, NBR Stationary-ring (AISI 316) (Period -9801) 1 Shaft seal, FPM, Stationary-ring, Front plate O-ring EPDM O-ring NBR O-ring FPM Welding flange Motor console Grease nipple Washer Shrink ring Set screw... 6 Pointed screw Lock nut Lock nut Allen screw Hexagon screw Propeller Fibre washer Nut Motor Motor (Period 9401-) Motor (Period -9401) O-ring EPDM O-ring NBR O-ring FPM O-ring NBR Gable gland Direction arrow Cover Cover (Period 9401-) Cover (Period -9401) Fixing clamp a 1 Fixing clamp (Period 9401-) Fixing clamp (Period -9401) Nut... 2 Nut Washer Top nut Guard for motor Screw O-ring Alternative 4 1 Shaft seal Sic./Sic. EPDM (Period 9801-) Shaft seal Sic./Sic. NBR (Period 9801-) Shaft seal Sic./Sic. FPM (Period 9801-) Service kit Service kit, NBR Service kit, FPM Parts marked with are included in the Service kit.
10 The information contained herein is correct at the time of issue but may be subject to change without prior notice. SP GB3 9809
ARC Aseptic Remote-Controlled Valve with PTFE diaphragm
Spare Parts ARC Aseptic Remote-Controlled Valve with PTFE diaphragm SP70727-GB6 2000-01 Type ARC - Stop Valve 2 Reg.: 2000-01 Intro.: 8605 Type ARC - Stop Valve Actuator DN 40 DN50 DN 65 DN80 DN 100 Pos.
Spare Parts MH Koltek Valve SP70735-GB
Spare Parts MH Koltek Valve SP70735-GB5 2000-05 Koltek Valve type MH, MHI and MHE Bearing and lid for bearing 2 Double shutter Reg.: 2000-05 Intro.: 9605 Koltek Valve type MH, MHI and MHE Type MH 25 mm
Spare Parts. SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB
Spare Parts SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm SP70811-GB2 2002-11 Type SMP-BCA - Stop Valve 2 Reg.: 9805 Intro.: 8605 Type SMP-BCA - Stop Valve 38mm 51mm 63.5mm 76mm 101.6mm Pos. Qty.
Spare Parts. SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB
Spare Parts SPC-2 Sanitary Electro-Pneumatic Modulating Valve SP70736-GB5 2002-11 Type SPC-2 (Samson actuator, beige colour) 2 Parts for FEP seal Reg.: 9805 Intro.: 9708 Type SPC-2 (Samson actuator, beige
Operating Manual. LKHSP Self-Priming Centrifugal Pump IM70818-GB
Operating Manual LKHSP Self-Priming Centrifugal Pump NOTE! This is an appendix to Operating Manual IM 70737 for LKH Centrifugal pump. The appendix must be used in connection with IM 70737 to ensure correct
Instruction Manual. SolidC Pump ESE00797-EN Original manual
Instruction Manual SolidC Pump ESE00797-EN3 2010-02 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior notice 1. EC Declaration
WHP+ SPARE PATRS LIST HIGH PRESSURE CENTRIFUGAL PUMP FORM NO.: L381655GB REVISION: 04/2015
SPARE PATRS LIST HIGH PRESSURE CENTRIFUGAL PUMP FORM NO.: L38655GB REVISION: 0/05 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. Form no.: L38655GB - revision 0/05 Table
MG 100. Spare parts list. Multi grapple. MG 100 s/n DEQ Construction Tools GmbH No
MG 100 Spare parts list Multi grapple MG 100 s/n DEQ176000-2018 Construction Tools GmbH No. 3390802401 2018-01-01 General information This spare parts list applies to the following: Part number Description
MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
Instruction Manual. LKH Centrifugal Pump IM70737-EN
Instruction Manual LKH Centrifugal Pump IM70737-EN11 2008-05 2 Declaration of Conformity The designating company Alfa Laval Company Name Albuen 31, DK-6000 Kolding, Denmark Address +45 79 32 22 00 Phone
BP 2050, 2050 R. Spare parts list. Bulk pulverizer. BP 2050 s/n DEQ BP 2050 R s/n DEQ
BP 2050, 2050 R Spare parts list Bulk pulverizer BP 2050 s/n DEQ169181 - BP 2050 R s/n DEQ169181-2018 Construction Tools GmbH No. 3390756701 2018-01-01 General information This spare parts list applies
BP 3050, 3050 R. Spare parts list. Bulk pulverizer. BP 3050 s/n DEQ BP 3050 R s/n DEQ
BP 3050, 3050 R Spare parts list Bulk pulverizer BP 3050 s/n DEQ169179 - BP 3050 R s/n DEQ169179-2018 Construction Tools GmbH No. 3390758101 2018-01-01 General information This spare parts list applies
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
CB Spare parts list. Hydraulic concrete buster. CB 2500 s/n DEQ Construction Tools GmbH No
CB 2500 Spare parts list Hydraulic concrete buster CB 2500 s/n DEQ169050-2018 Construction Tools GmbH No. 3390787501 2018-11-22 General information This spare parts list applies to the following: Part
BC Spare parts list. Bucket crusher. BC 2500 s/n DEQ Construction Tools GmbH No
BC 2500 Spare parts list Bucket crusher BC 2500 s/n DEQ159235 2018 Construction Tools GmbH No. 3390786201 2018-01-01 General information This spare parts list applies to the following: Part number Description
MG 400. Spare parts list. Multi grapple. MG 400 s/n BGF Construction Tools GmbH No
MG 400 Spare parts list Multi grapple MG 400 s/n BGF074759-2016 Construction Tools GmbH No. 3390774801 2016-07-21 General information This spare parts list applies to the following: Part number Description
No: En Revision Parts List. Bravo
No: 899370 En Revision.0 200 05 Parts List Bravo 800 852.020 www.grindex.com Parts List Bravo 800 852.020 Overview Table of Contents This publication contains the following topics: Topic Preface... 4
kythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump
. kythe Compact Pump LKH-110 and LKH-120/P Multi-Stage Centrifugal Pump Application LKH-110 and -120/P are highly efficient and economical multistage centrifugal pumps, which meet the requirements of sanitary
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
Prolac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications
Prolac MSHCP I Application Due to the choice of aterials and its design, PROLAC HCP is appropriate for applications requiring a high level of hygiene, it offers gentle handling of the product and resistance
MULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
Parts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-016 (6/99)
Parts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-012 NEW
EC 150T. Spare parts list. Hydraulic breakers. EC 150T s/n DEQ Construction Tools GmbH No
EC 150T Spare parts list Hydraulic breakers EC 150T s/n DEQ181223-2018 Construction Tools GmbH No. 3390768001 2018-07-30 General information This spare parts list applies to the following: Part number
Revision 1.0 Parts List Maxi Lite
Revision.0 www.grindex.com Parts List 807.300 Maxi Lite Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
Page - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART BEST ONE 202 PERFORMANCE CHART BEST ONE VOX 203
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 202 PERFORMANCE CHART VOX 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 DIAGRAM AND ELECTRIC CONNECTIONS 302 DIAGRAM
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 201 CURVE SPECIFICATIONS 202 PERFORMANCE CHART 40 203 PERFORMANCE CHART 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301
BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
Spare parts list. Hydraulic breakers RX 30.
Spare parts list Hydraulic breakers RX 30 RX 30 Valid from serial number DEQ121453 Valid to serial number www.cp.com RX 30 Spare parts list General information This spare parts list applies to the following:
Spare parts list. Hydraulic breakers RX 26.
Spare parts list Hydraulic breakers RX 26 RX 26 Valid from serial number DEQ152263 Valid to serial number www.cp.com RX 26 Spare parts list General information This spare parts list applies to the following:
EC 120T. Spare parts list. Hydraulic breakers. EC 120T s/n DEQ Construction Tools GmbH No
EC 120T Spare parts list Hydraulic breakers EC 120T s/n DEQ150544-2018 Construction Tools GmbH No. 3390767701 2018-01-01 General information This spare parts list applies to the following: Part number
Specially designed low-maintenance control valves for a wide range of applications in water circulation
SEMPELL Specially designed low-maintenance control valves for a wide range of applications in water circulation Features and benefits modular design the valve is suitable for continuous operation good
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
No: En Revision Parts List. MINEX O-RING KIT BASIC REPAIR KIT E_8101_171_expl_view
No: 89850 En Revision 6.0 0 0 Parts List MINEX 80.7 www.grindex.com O-RING KIT BASIC REPAIR KIT 0008E_80_7_expl_view Parts List MINEX 80.7 Overview Table of Contents This publication contains the following
SPECIFICATION PUMP. DW - G 2 UNI ISO 228 Flange
SPECIFICATION PUMP Type of liquid Dirty water, sewage water Liquid Max temperature [ C] 40 Handled Max solids size [mm] 50 spherical Maximum immersion [m] 7 Single channel (DW) Impeller Vortex (DW VOX)
RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
Instruction Manual. SMP-TO Sanitary Mixproof Tank Outlet Valve IM70785-GB
Instruction Manual SMP-TO Sanitary Mixproof Tank Outlet Valve IM70785-GB2 1996-06 Declaration of Conformity The designating company Alfa Laval Company Name 6000 Kolding Address +45 79 32 22 00 Phone No.
MB Spare parts list. Hydraulic breakers. MB 1000 s/n DEQ Construction Tools GmbH No
MB 1000 Spare parts list Hydraulic breakers MB 1000 s/n DEQ170832-2018 Construction Tools GmbH No. 3390801001 2018-01-01 General information This spare parts list applies to the following: Part number
Flygt /181. Parts List
Flygt 057.09/8 Parts List Table of Contents Table of Contents Introduction... Purpose of this manual... Disclaimer... Data for ordering spare parts... Specially approved products... Qualification of personnel...
Instruction Manual. LKHI Centrifugal Pump for 16 bar Inlet Pressure ESE00700-EN Original manual
Instruction Manual LKHI Centrifugal Pump for 16 bar Inlet Pressure 3002-0008 ESE00700-EN6 2017-08 Original manual Table of contents The information herein is correct at the time of issue but may be subject
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
Single Seal Driver O-Ring
Fristam Pumps 0 FM3 (HP3) Assembly Single Rotating Single Stationary Double Stationary Double Rotating Spring Set Screw Single Rotating 265000334 Rev A Driver Drive Ring Double Single Stationary Single
INVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE CURVE 150 206 - CONSTRUCTIONS
Flygt /181. Parts List
Flygt 045.091/181 Parts List Table of Contents Table of Contents Introduction... Purpose of this manual... Disclaimer... Data for ordering spare parts... Specially approved products... Qualification of
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART DW 204 PERFORMANCE CHART DW VOX 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
- CONTENTS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301 MECHANICAL SEAL 302 DIAGRAM
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
MG Spare parts list. Multi grapple. MG 2700 s/n BGF Construction Tools GmbH No
MG 2700 Spare parts list Multi grapple MG 2700 s/n BGF057417-2017 Construction Tools GmbH No. 3390775501 2017-01-23 General information This spare parts list applies to the following: Part number Description
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
AGRAR MANURE MIXERS. Our service range for effective manure management
MANURE MIXERS Our service range for effective manure management PTO Driven Mixers Our tractor driven agitator Types Z4, Z5 and Z6 are characterized by easy handling, quiet operation and high mixing performance.
Instruction Manual. LKH Centrifugal Pump ESE00698-EN Original manual
Instruction Manual LKH Centrifugal Pump 3000-0059 ESE00698-EN14 2012-10 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior
TETRA PAK VALVES. Aseptic Remote Controlled Valve Type ARC Stop Valve FREEPHONE:
For calls outside the UK Telephone +44 1777 701141 or Fax +44 1777 869983 FREEPHONE: 0800 666397 Type ARC Stop Valve 8 Freephone lines are open between 8.00am and 5.30pm Monday to Friday FREEFAX: 0800
No: En Revision Parts List. MINETTE O-RING KIT BASIC REPAIR KIT F_8102_171_expl_view
No: 89837 En Revision 6.0 202 0 Parts List MINETTE 802.7 www.grindex.com O-RING KIT BASIC REPAIR KIT 2002F_802_7_expl_view Parts List MINETTE 802.7 Overview Table of Contents This publication contains
CRN90. Parts List & Kits. CR Series. Parts List & Kits CRN90. GRUNDFOS Commercial Industrial Service Manual
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence P & Kits CRN90 GRUNDFOS Commercial Industrial Service Manual CRN90 P & Kits Contents P Spare t Kits Accessories
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 80 203 PERFORMANCE CURVE 100 204 PERFORMANCE CURVE 120 205 PERFORMANCE
KEYSTONE. Hygienic butterfly valves model F250 & F251 Installation & Maintenance Instructions. 1 Contents 1 Contents 1
Installation & Maintenance Instructions KEYSTONE 1 Contents 1 Contents 1 2 Introduction 1 2.1 Valve use 1 2.2. Application area 1 2.3. Incorrect use 1 3. Safety 2 4. Transport and storage 2 5. Installation
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL SEAL 301
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DW 203 PERFORMANCE CURVE DW VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 203 PERFORMANCE CURVE BEST 4 203 PERFORMANCE CURVE BEST
Norm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
LKH UltraPure Centrifugal Pump
PD 66322 GB1 2000-08 LKH UltraPure Centrifugal Pump Application The LKH UltraPure pump is a highly efficient and economical centrifugal pump, which meets the requirements of the pharmaceutical industries.
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 TYPE KEY 202 PERFORMANCE CHART DW 203 PERFORMANCE CHART DW VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 SINGLE
200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES DW VOX 204
CONTENTS Page SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 203 PERFORMANCE CURVES VOX 204 CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
BIOGAS AGITATORS. Our range of products BIOGAS
AGITATORS Our range of products Long-axis agitator GIANTMIX FR 30 For concrete and steel tanks - mounting through the wall FR 1-5 (200 275 400 rpm) Tube Ø 101.6 mm in ss304 or ss316 Tube wall thickness
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
INSTRUCTION. Internal pump elements APP6.5 - special 180B R R9134
INSTRUCTION Internal pump elements APP6.5 - special 180B3101 180R9134 This document covers the instructions for changing internal pump elements on the axial piston pumps APP6.5. Note: It is essential that
Installation & Service Manual
MADE IN SWEDEN Friction Transporter Installation & Service Manual 203-04-2 TPE 00 Installation TPE 00 Manual Installation. TPE 00 should be mounted so the tray can move without obstruction in both directions.
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
Instruction Manual. SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm IM70811-EN
Instruction Manual SMP-BCA Aseptic Mixproof Valve with PTFE Diaphragm IM70811-EN3 2010-04 Declaration of Conformity The designating company Alfa Laval Company Name Albuen 31, DK-6000 Kolding, Denmark
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE RIGHT PERFORMANCE CURVE RIGHT
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 75 204 PERFORMANCE CURVE 100 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 BEARINGS 301 MECHANICAL
DELTA RUF3. Operating Manual. Non - return Valve. Read and understand this manual prior to operating or servicing this product.
Operating Manual DELTA RUF3 Non - return Valve Read and understand this manual prior to operating or servicing this product. www.sks-online.com UK Table of contents Page 1. General Terms 2 2. Safety
SP A, SP. Submersible pumps Submersible motors Accessories. 50 Hz
SP A, SP Submersible motors Accessories For raw water supply, irrigation systems, groundwater lowering, pressure boosting and various industrial applications. 5 Hz TM 7318 2298 Contents General data Performance
GRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP, motors and accessories 5 Hz Contents General data Performance range 3 Applications 4 Type key 4 Pumped liquids 4 Operating conditions 4 Curve conditions 4 Pump range 5 Motor
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE BEST 2 203 PERFORMANCE CURVE BEST 3 204 PERFORMANCE CURVE BEST 4 205
Hygienic Butterfly Valve VZFA Product range overview
Hygienic Butterfly Valve Product range overview Hygienic butterfly valve Typ Norm Nominal diameter -C Clamp OD 1" 1 1/2" 2" 2 1/2" 3" 4" Connection possibilities Clamp / Clamp Welding / Welding Clamp /
CP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,
Instruction Manual. SMP-BC Sanitary Mixproof Valve IIM70771-GB
Instruction Manual SMP-BC Sanitary Mixproof Valve IIM70771-GB3 1996-03 Declaration of Conformity The designating company Alfa Laval Company Name 6000 Kolding Address +45 79 32 22 00 Phone No. hereby declare
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
GRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP, motors and accessories 5 Hz Contents General data Performance range Page 3 Applications Page 4 Type key Page 4 Pumped liquids Page 4 Operating conditions Page 4 Curve conditions
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
EC 70T. Spare parts list. Hydraulic breakers. EC 70T s/n BES Construction Tools PC AB No
EC 70T Spare parts list Hydraulic breakers EC 70T s/n BES038596 2018 Construction Tools PC AB No. 9800159801 2018-01 General information This spare parts list applies to the following: Part number Description
Instruction Manual. LKH Centrifugal Pump ESE00698-EN Original manual
Instruction Manual LKH Centrifugal Pump 3000-0059 ESE00698-EN21 2017-05 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior
ACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer ALSO VALID FOR PUMP SERIES UCF Generation 5 1. Applications
CVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
DW-DW VOX. Submersible Sewage Pumps. cod REV. 01/05. notice: all specifications could be subject to change
cod. 479705360 REV. 01/05 EBARA PUMPS EUROPE S.p.A. reserves the right to make modifications without prior notice: all specifications could be subject to change 007Q_DWDW VOX GB dep 18012005 17:10 Pagina
Flygt Parts List
Flygt 2870.80 Parts List Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data plate...3 2.3 Product
200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
Instruction Manual. LKH Evap ESE01861-EN Original manual
Instruction Manual LKH Evap 3000-0059 ESE01861-EN5 2017-09 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior notice 1.