Product catalogue. Mechanical accessories for pumps and mixers

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Product catalogue. Mechanical accessories for pumps and mixers"

Transcription

1 Product catalogue Mechanical accessories for pumps and mixers

2 Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15 Pump accessories Check valve...17 Check valve...18 Gate valve...19 Gate valve...20 Flap check valve...21 Hose unit Hose unit Hose unit Support grips Support grips Braid for cable grips Slurry pump accessories Flange Coupling Pipe bend Lifting chain...22 Lifting chain...23 Lifting chain...24 Chain block and tackle...25 BIBO pump accessories Quick coupling...27 Quick coupling...28 Hose...29 Check valve...30 Hose...31 Hose...32 Hose clamp...33 Hose clamp...34 Hose clamp...35 Jointing pipe...36 The manufacturer reserves the right to alter specifications and design

3 Mixer accessories Mixer 4610, 4620 Mixer 4610, 4620, 4630, 4640, 4650, 4660, 4670, 4680 Mixer 4410,

4 Single guide bar system Single guide bar system Lifting system Lifting equipment Guide bar system Mixer 4610, 4620, 4630, 4640, 4650, 4660, 4670,

5 Single guide bar system Dimensions All dimensions are in mm. Lifting davit 150 Lifting davit 320 Lifting system Product The lifting system holds the mixer in place and is also used for lifting the mixer when service. It consists of: a lifting davit, a winch, chain links with hook and shackle, a corner block, block and tackle. Maximum load Lifting davit 600 The accessories are CE-marked and approved. Part Maximum load Length Lifting davit kg/150 kg 1) - Lifting davit kg - Lifting davit kg - Winch kg/150 kg 1) Winch kg - Winch kg - Lifting chain 500 kg/1000 kg 5m,9m,20m Chain links with hook and shackle 500 kg/1000 kg 5 m, 7 m Corner block 300 kg - Block and tackle 500 kg - Block and tackle 1000 kg - Davit holder 1) Max.load if only one corner block is used: 80 kg Lifting davit Stainless steel Galvanized steel, hot dip 1. Floor mounted 2. Wall mounted 5

6 Single guide bar system Guide bar system over 6 m Indexing screw Alternative upper bracket Guide bars Intermediate support for guide bars over 6 m Lifting davit Dimensions Guide bar system up to 6 m Stainless steel Bracket Indexing screw Alternative upper bracket Lower bracket fixed to haunch or sloping tank bottom Lower bracket fixed to tank bottom Lower bracket fixed to tank wall 6

7 Single guide bar system Brackets Dimensions Measurements for mounting of brackets. All dimensions are in mm. Guide bar Distance between hole and edge dimensions Minimum Recommended 50 x mm 110 mm 100 x mm 110 mm 100 x mm 125 mm 150 x mm 125 mm Brackets Guide bar profile Dimensions in mm Davit holder, floor mounted bracket A B C D 50 x 50, 100 x 50 Ø x 100, 150 x 100 Ø Davit holder, wall mounted bracket A B C D E F G H 50 x 50, 100 x 50 Ø ,5 100 x 100, 150 x 100 Ø Guide bar, roof mounted bracket A B C D E F G 50 x 50, 100 x 50 Ø x 100, 150 x 100 Ø

8 Single guide bar system Brackets Guide bar profile Dimensions in mm Guide bar, intermediate bracket A B C D E F 50 x 50, 100 x 50 Ø ,5 100 x 100, 150 x 100 Ø Guide bar, lower bracket A B C D E F G 50 x 50, 100 x 50 Ø ,5 100 x 100, 150 x 100 Ø

9 Double/tripod guide bar system Double/tripod guide bar system Lifting system Lifting equipment Lifting equipment Double guide bar system Tripod guide bar system Mixer 4410,

10 Double/tripod guide bar system Dimensions All dimensions are in mm. Lifting davit 300 Lifting system Lifting davit 320 Product The lifting system holds the mixer in place and is also used for lifting the mixer when service. It consists of: a lifting davit, a winch, chain links with hook and shackle, a corner block, block and tackle. Maximum load The accessories are CE-marked and approved. Part Max load Length Lifting davit kg - Lifting davit kg - Winch kg - Winch kg - Lifting chain 500 kg 5m,9m,20m Chain links with hook and shackle 500 kg 5 m, 7 m Corner block 400 kg - Block and tackle 500 kg - Lifting davit Stainless steel Galvanized steel, hot dip 10

11 Double/tripod guide bar system Upper bracket Double guide bar Guide bar Ø115 mm. Length 3m alternative 6m Lifting davit Dimensions Stainless steel All dimensions are in mm. Upper bracket Support Lower bracket 11

12 Double/tripod guide bar system Tripod guide bar The guide bar holds the mixer in place. It is fastened at the bottom of the tank. An alternative upper bracket is available for mounting on the tank wall. Lifting davit Stainless steel Dimensions All dimensions are in mm. Alternative upper bracket 12

13 Double/tripod guide bar system Brackets Dimensions Measurements for mounting of brackets. All dimensions are in mm. Guide bar Distance between hole and edge dimensions Minimum Recommended 115 mm 55 mm 110 mm 100 x mm 125 mm Brackets Guide bar profile Dimensions in mm Davit holder, floor mounted bracket A B C D 100 x 100 Ø Tripod guide bar, alternative upper bracket A B C D E F 100 x 100 Ø Double guide bar, upper bracket A B C D E F G Ø / 1294 Ø / / 1363 Double guide bar, lower bracket A B C D E F G Ø , Ø18 13

14 Cantilever system Dimensions Guide bar length All dimensions are in mm. Wall mounted bracket max. 3 m Cantilever system Product The Cantilever system is intended for small mixers. The cantilever bar is clamped or bolted to the tank edge. For optimal mounting flexibility four different brackets can be used: Floor mounted bracket Hanging bracket Wall mounted bracket Adjustable bracket Floor mounted bracket Application The Cantilever system is intended for mixer 4610 and Alternative 1 High grade stainless steel 2 Galvanized steel, hot dip 14

15 Bottom fixing plate system Hanging bracket Adjustable bracket Bottom fixing plate system Application The bottom fixing plate system is intended for mixer 4610 and Alternative 1 High grade stainless steel 2 Galvanized steel, hot dip αv: angle vertical +60, -46 αh: angle horizontal ± 90 β: angle vertical ± 30 15

16 Pump accessories 16

17 Check valve D H C A L Check valve Nominal pressure PN 16 for connection PN 10 for connection Liquid temperature max +80 C Flange Drilled according to ISO Treatment Alternative Treatment 1 Water resistant black primer 2 Epoxy painting 80 µm Flange connection A C D H L Weight Part No. mm mm mm mm mm kg Alternative 1 Alternative

18 Check valve B H C SW L Check valve Nominal pressure PN 16 for connection PN 10 for connection 300 Liquid temperature max +80 C Treatment Grey synthetic basic painting Alternative 1 Nodular cast iron 2 Bronze RG5 Nodular cast iron DN Thread B C H L SW Weight Part No. ISO G mm mm mm mm mm kg 32 11/4" , /2" , " Bronze RG5 DN Thread B C H L SW Weight Part No. ISO G mm mm mm mm mm kg 32 11/4" , /2" , " ,

19 Gate valve Part Body & Bonnet Ductile iron to ISO 1083 Stem Stainless steel, DIN X 20 Cr 13 Wedge Ductile iron to ISO 1083, core fully encapsulated with EPDM rubber with integral wedge nut of dezincification resistant brass, CZ 132 to BS n Gate valve Product Cast iron gate valves, soft sluice valve. d Liquid temperature max +70 C Range of temperature +70 C Nominal pressure PN 10 / PN 16 Treatment Electrostatically applied epoxy resin to DIN Internally and externally. Flange Drilled according to ISO DN PN L H D1 D2 D3 F G n d Weight Part No. mm mm mm mm mm mm mm number mm kg 50 10, , , , , , , , , , , , , , , , , ,

20 Gate valve G F H D2 DN d D3 D1 Gate valve Product f n a Cast iron gate valves, with metallic seat. L Liquid temperature max +70 C Part House and cover ISO 1085 Stem DIN EN Liquid temperature max +150 C Nominal pressure PN 10 Treatment Sprayed with grey paint Flange Drilled according to ISO DN L H D1 D2 D3 F G a f n d Weight Part No. mm mm mm mm mm mm mm mm mm number mm kg

21 Flap check valve Flap check valve Cast iron Nominal pressure PN 16 for connection PN 10 for connection 300 Liquid temperature + 80 C Flange Drilled according to ISO DN Fig L V D1 D2 D3 a f d n Weight Part No. mm mm mm mm mm mm mm mm number kg , , , , , , ,

22 Lifting chain d B d A t L L tot. t Alternative 1 Stainless steel - EN AISI 316L 2 Steel Grade 4 hot-dip galvanized min. 45 µm Lifting chain Dimensions Alternative Max. load ton Lifting chain (A) (d xtxb i )mm Master link (B) (d xtxb i )mm Segment length L mm 1 0,2 5 x 18,5 x 7,5 6,5 x 70 x ,5 6 x 18,5 x 9,5 9 x 70 x ,0 8 x 24 x 10,4 10 x 80 x ,5 10 x 30 x x 80 x ,2 5 x 18,5 x 7,5 6,5 x 70 x ,5 6 x 18,5 x 9,5 9 x 70 x ,0 8 x 24 x 10,4 10 x 80 x ,5 10 x 30 x x 80 x Number of segments Total length L tot Part No. mm approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx approx

23 Lifting chain L t B ds Lifting chain A d a Alternative 1 Stainless steel - EN AISI 316L 2 Steel Grade 4 hot-dip galvanized min. 45 µm Alternative Lifting chain (A) (d xtxb i )mm Working load Transition link (B) L kg (d xtxb i )mm mm d s mm a(+tol.) mm Fits the following lifting chains Part No. 1 6,0 x 18,5 x 9, x35x M8 16 (+0,5) ,0 x 18,5 x 9, x 35 x M12 20 (+5) ,0 x 24,0 x 10, x44x M ,0 x 24, 0 x 10, x 44 x M16 24 (+7,6)

24 Lifting chain d B A t t d Lifting chain L Alternative 1 Stainless steel - EN AISI 316L 2 Steel Grade T electroplated min. 12 µm Alternative Lifting chain (A) Max. load Transition link (B) Length L Part No. (d xtxb i )mm ton (d xtxb i )mm m 1 6,3 x 19,1 x 8,6 0,5 7x35x ,3 x 19,1 x 8,6 0,5 7 x 35 x ,3 x 19,1 x 8,6 0,5 7x35x , 3x 19,1 x 8,6 0,5 7 x 35 x ,3 x 19,1 x 8,6 0,5 7x35x ,9 x 23 x 10 1,0 9 x 44 x ,9 x 23 x 10 1,0 9x44x ,9 x 23 x 10 1,0 9 x 44 x ,9 x 23 x 10 1,0 9x44x ,9 x 23 x 10 1,0 9 x 44 x

25 Chain block and tackle 1 2 Chain block and tackle Alternative Chain material Lifting chain 1 Stainless steel - EN AISI 316L See page 24 2 Electroplated See page 22 and 23 Alternative Lifting chain Max. working load c g l Part No. (d xt)mm ton mm mm m 2 5,0 x 15, , ,3 x 19, , ,3 x 19, , ,3 x 19, , ,1 x 20, , ,1 x 20, , ,9 x 23, ,

26 BIBO pump accessories 26

27 Quick coupling a d a d G Quick coupling Couping part DN-hose-AI standard. Female-male threaded. G Nominal pressure Die-cast aluminium PN10, PN16 DN PN Standard a d Pipe thread Part No. Inner G Outer G mm mm inch inch G1, G1, DIN ,5 G G2A ,5 G G3A G ) G ) G6A G ) with 3 catches 27

28 Quick coupling L a d Quick coupling Couping part DN-hose-AI standard. For hose. Nominal pressure Die-cast aluminium PN10, PN16 Size DN PN Standard a L d Part No. mm mm mm C1, C DIN B DIN A A 4 1/ DIN F6 1) , ) With 3 catches 28

29 Hose D T 1. PVC 2. 1 plies 3. PVC Hose Delivery hose pliable. Working temperature PVC C D T Colour Weight Working pressure (N.B. 20 C) Bursting pressure (N.B. 20 C) Part No. Inches (mm) mm g/m MPa MPa 11/4(32) 1,35 Dark blue 240 0,9 2, /2(38) 1,35 Dark blue 260 0,5 1, (52) 1,4 Dark blue 280 0,5 1, (76) 1,8 Dark blue 460 0,4 1, (102) 2,0 Dark blue 650 0,4 1, (153) 2,1 Dark blue ,3 0,

30 Check valve Ø D B Check valve C A Aluminium DN C A B D Part No. ISO G mm mm mm , ,

31 Hose Ø D 1. Rubber 2. 2 plies 3. Rubber Hose T Temperature Inside Outside Reinforcement -40 C C black with smooth syntetic rubber black, with smooth syntetic rubber, UV-resistant high strength with syntetic cord. Two plies D inches (mm) T mm Colour Weight Kg/mm Working pressure MPa Bursting pressure MPa Part No. 2 (51) 2,75 Black 0, (76) 2,75 Black 0, (102) 3 Black 1, (152) 3 Black 1, (203) 3,5 Black 2, (254) 4 Black 3, /2(40) 3 Black 0, (51) 3 Black 0, (76) 3 Black 0, (102) 3,5 Black 1, (152) 4 Black 2,

32 Hose 1 2 Ø D 1. Rubber 2. 2plies 3. Rubber Hose Delivery hose pliable. T Temperature Inside Outside Reinforcement -40 C C black with smooth syntetic rubber black, with smooth syntetic rubber, UV-resistant high strength with syntetic cord. Two plies D T Working pressure Bursting pressure Part No. Inches (mm) mm MPa MPa 2 (52) 1,2-1,4 1,5 4, (76) 1,2-1,4 1,5 4, (102) 1,2-1,4 1,0 3, (152) 1,2-1,4 1,0 3,

33 Hose clamp e r ø d b Hose clamp a Steel Werkstoff Nr Screw and nut Grade 8.8 coated with zink d a b e r Recommended tightening torque Part No. mm mm mm mm mm Nm , M , M ,4 27,5 13 M ,4 27,5 13 M ,4 27,5 13 M ,4 27,5 13 M , M , M

34 Hose clamp N Ø D t B Hose clamp Steel, bright coated with zinc (acc. to DIN 3017) D B N t Part No. mm mm mm mm ,0 7,0 0, ,0 7,0 0, ,0 7,0 0, ,0 7,0 0, ,0 7,0 0,

35 Hose clamp ØD Hose clamp b Steel, yellow chromatised (bright coated with zinc) D b Part No. mm mm

36 Jointing pipe A C E Jointing pipe L 2 L 1 Steel sheet, hot dip galv. A C E L 1 L 2 Part No. mm (inch) mm mm mm mm 50 (2") 47,6 1, (3") 72 1, (4") 99 1, (6") 147 1, (8") 197 1, (10") 247 1,

37 Hose unit A B C Hose unit PVC pressure hose pliable, both sides connected with two hose couplings and two or three hoseclamps. Lenght 20 m Steel sheet, hot dip galv. Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A1 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 0,5 1, (76) 0,4 1, (102) 0,4 1, (153) 0,3 0, Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A2 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 0,5 1, (76) 0,4 1, (102) 0,4 1, (153) 0,3 0,

38 Hose unit A B C Hose unit PVC pressure hose pliable, both sides connected with two hose couplings and two or three hose clamps. Length 20 m Steel sheet, hot dip galvanized Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A1 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 1,5 4, (76) 1,5 4, (102) 1,0 3, (153) 1,0 3, Inside diameter hose Working press. (at 20 C) Bursting pressure Part No. hose coupling A2 Part No. hose clamps B Number of hose clamps B Part No. hose C Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 1,5 4, (76) 1,5 4, (102) 1,0 3, (153) 1,0 3,

39 Hose unit A B C Hose unit Synthetic rubber pressure hose with synthetic cord pliable, both sides connected with two hose couplings and two hose clamps. Length 20 m Steel sheet, hot dip galvanized Inside diameter hose Working press. (at 20 C Bursting pressure Part No. hose coupling (A) Part No. hose clamps (B) Number of hose clamps (B) Part No. hose (C) Part No. hose unit Inches (mm) MPa MPa 2pcs 2 (52) 0,5 1, (76) (102) (152)

40 Support grips L A B Dy Support grips Support grip Thimble Press lock Stainless steel Stainless steel Copper Steel sheet, hot dip galvanized For cable D y B L Number of meshes (A) Part No. mm mm mm st/pcs

41 Support grips Support grips Support grip Thimble Press lock Stainless steel Stainless steel Copper Steel sheet, hot dip galvanized Dimensions Type A Type B Type C 1 eye/split (lace up) 1 eye/closed 2 eyes/closed Type L L 1 For cable d y Part No. mm mm A Steel. hot dip galvanized B Steel. hot dip galvanized mm B Stainless steel C Steel. hot dip galvanized 41

42 Braid for cable grips Ø D Braid for cable grips Colour: Design Polyethene Orange Friable pleated ropes D Part No. mm

43 Slurry pump accessories 43

44 Flange Z B A X W Y Flange ASTM A-536 Pipe Max. work Sealing surface W X Y Z Part No. Nom. size Actual size pressure Amax. Bmin. mm mm kpa mm mm mm mm mm mm , ,

45 Coupling Y Z X Coupling ASTM A-536 Nominal pressure PN10, PN16 VITAULIC Pipe Max. work X Y Z Part No. type nominal size actual size pressure mm mm kpa mm mm mm Style , Style ,

46 Pipe bend A Pipe bend Cast iron, coated inside with neoprene rubber Pipe A Part No. Nominal size Actual size mm mm mm MPa , ,

47

48 Mechanical accessories eng ITT Flygt AB XX XX XX

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1 Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut

More information

STAF-SG. ANSI flanges. Balancing valves DN

STAF-SG. ANSI flanges. Balancing valves DN STAF-SG ANSI flanges Balancing valves DN 20-400 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance

More information

CONFIGURATION OF CABLE SUPPORT SYSTEMs

CONFIGURATION OF CABLE SUPPORT SYSTEMs CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)

More information

DRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works

DRIVE SYSTEM. Operation and support elements made of stainless steel for chambers and water treatment works DRIVE SYSTEM Operation and support elements made of stainless steel for chambers and water treatment works Page 1 DALMINEX www.dalminex.de info@dalminex.de DRIVE SYSTEM Foreword DALMINEX, has been producing

More information

STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN

STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN STAF, STAF-SG Balancing valves PN 16 and PN 25 DN 20-400 IMI TA / Balancing valves / STAF, STAF-SG STAF, STAF-SG A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing valve that delivers accurate

More information

Pressure Pipes & Fittings

Pressure Pipes & Fittings Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:

More information

STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN

STAF, STAF-SG. Balancing valves PN 16 and PN 25 DN STAF, STAF-SG Balancing valves PN 16 and PN 25 20-400 IMI TA / Balancing valves / STAF, STAF-SG STAF, STAF-SG A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing valve that delivers accurate

More information

STAF-SG. ANSI flanges. Balancing valves Size 3/4-16

STAF-SG. ANSI flanges. Balancing valves Size 3/4-16 STAF-SG ANSI flanges Balancing valves Size 3/4-16 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance

More information

Ref ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:

Ref ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref: Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications

More information

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant

More information

Wafer Check Valve Type 012 PVC-U

Wafer Check Valve Type 012 PVC-U novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar

More information

Differential pressure relief controller AFPA / VFG 2 (VFG 21)

Differential pressure relief controller AFPA / VFG 2 (VFG 21) Differential pressure relief controller AFPA / VFG 2 (VFG 21) Description AFPA VFG2 (VFG 21) is a self-acting differential pressure relief controller primarily for use in district heating systems. The

More information

Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water

Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic

More information

See our expanding selection of products on Product Portfolio

See our expanding selection of products on  Product Portfolio See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page

More information

Fittings and Accessories. for Centralized Lubrication Systems and General Use

Fittings and Accessories. for Centralized Lubrication Systems and General Use and Accessories 1-0103-US 1 Fittings and Accessories 1-0103-US for Centralized Lubrication Systems and General Use Fittings and Accessories 1-0103-US 3 Contents Page Adaptors... 9, 10 Banjo fittings...

More information

KNIFE GATE VALVES -- MODEL D

KNIFE GATE VALVES -- MODEL D PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several

More information

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet

More information

Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:

Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure: Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30

More information

PN16 Resilient Seated Gate Valves DN50 - DN600

PN16 Resilient Seated Gate Valves DN50 - DN600 PN16 Resilient Seated Gate Valves DN50 - DN600 Series: VGR16 Gate Valve or Sluice Valve: The great naming debate The correct terminology referencing control valves for fluid media has, for many years,

More information

Materials : Ductile iron body EN GJS

Materials : Ductile iron body EN GJS Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications

More information

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA

CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400

More information

ANSI version. The valve closes when the differential pressure rises

ANSI version. The valve closes when the differential pressure rises Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For

More information

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.

Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle. Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing

More information

Motorized Butterfly Valve

Motorized Butterfly Valve Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated

More information

Valves and accessories for gas

Valves and accessories for gas Valves and accessories for gas When safety counts! AVK INTERNATIONAL A/S When safety counts, you can count on products from AVK! It s all about safety Safety comes first. Therefore AVK does not compromise

More information

PARTS SPECIFICATIONS

PARTS SPECIFICATIONS CHECK VALVES MODELS NR- 010, NR-020 a. Model NR- 010 B NO PART PARTS SPECIFICATIONS MATERIAL BODY REINFORCED NYLON DISC REINFORCED NYLON SEAL RUBBER EPDM BOLT STAINLESS STEEL 316 SHAFT STAINLESS STEEL

More information

2 Index. How the fence works: Connectors 13. Why to use electric fence for animal control 3. Reels 17. Fence heights 3. Insulators 18.

2 Index. How the fence works: Connectors 13. Why to use electric fence for animal control 3. Reels 17. Fence heights 3. Insulators 18. Catalogue Electric Fencing 2 Index How the fence works 2 Why to use electric fence for animal control 3 Fence heights 3 Energizers 4 Batteries 8 Earthing 9 Connectors 13 Reels 17 Insulators 18 Accessories

More information

TA-6-way valve. Standard control valves 6-way valve for change-over systems

TA-6-way valve. Standard control valves 6-way valve for change-over systems TA-6-way valve Standard control valves 6-way valve for change-over systems IMI TA / Control valves and Actuators / TA-6-way valve TA-6-way valve The 6-way valve solution enables various control set-ups

More information

BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR

BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional

More information

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50 Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60

More information

Series 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6

Series 46 Self-operated Regulators Differential Pressure and Flow Limiters Type 46-5 Type 46-6 Series 46 Self-operated Regulators Differential Pressure and Flow imiters Type 46-5 Type 46-6 Application Differential pressure and flow limitation for district heating systems with indirect connection,

More information

MR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating.

MR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating. Type series booklet 8505.12/12--10 MR manual actuators MR 25 to 200 : Worm wheel and screw kinematics MR 400 to 1600 : Yoke kinematics MR 400 to 1600 MR 25 to 200 Output torques up to 16 000 Nm Applications

More information

ROSTA Rubber Suspension Units. Multifunctional Modules for the Machine Industries guiding tensioning absorbing

ROSTA Rubber Suspension Units. Multifunctional Modules for the Machine Industries guiding tensioning absorbing ROT ultifunctional odules for the achine Industries guiding tensioning absorbing pendulum suspensions for unbalanced motors torque supports for gear motors ROT Rubber torsion-elastic spring assemblies

More information

Trunnion Ball Valve Catalogue

Trunnion Ball Valve Catalogue Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of

More information

Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange

Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Data sheet Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications.

More information

Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN

Maintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications

More information

Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting

Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting Data sheet Pressure independent control valve with integrated flow limiter AVQM (PN 16) - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: AMV 0 1)

More information

Flow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line

Flow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line Flow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line Description / Application AFPQ VFQ AFPQ 4 VFQ The controller

More information

Formstücke, Flanschendruckrohre. und Armaturen. Index: (click with mouse) Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG )

Formstücke, Flanschendruckrohre. und Armaturen. Index: (click with mouse) Fittings, Flanged pipes and Valves made of Ductile Cast Iron ( GGG ) FITTINGS AND VALVES Index: (click with mouse) Formstücke, Düker in general Flanschendruckrohre Preamble und Armaturen aus The complete duktilem product Gusseisen range ( GGG ) > Index Location plan Flag

More information

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation

Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug

More information

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING

SECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

CR45-5 A-F-A-E-HQQE 3x400/ HZ

CR45-5 A-F-A-E-HQQE 3x400/ HZ GRUNDFOS DATA BOOKLET CR45-5 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 9612285 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612285/cr-45-5-a-f-a-e-hqqe.html

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges GN10-10 C + 80 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating stem, non rising handwheel No tightness

More information

Mounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve

Mounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve Electric Control Valves Types 3226/5857, 3226/5824, 3226/5825, 3226/5757-7, 3226/5724-8, 3226/5725-7, 3226/5725-8 Pneumatic Control Valve Type 3226/2780 Type 3226/5857 Type 3226/5757-7 Type 3226/2780-2,

More information

Three-port slipper valves PN10, female-threaded

Three-port slipper valves PN10, female-threaded 4 232 SERIES 02 Three-port slipper valves PN10, female-threaded VBI31.. Three-port slipper valves, PN10, female-threaded Grey cast iron EN-GJL-250 DN 20 40 k vs 6.3...25 m 3 /h Angle of rotation 90 Female-threaded

More information

Page ATALOGUE. Web: Tel: Fax:

Page ATALOGUE. Web:    Tel: Fax: Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION

More information

Standard Chainwheel

Standard Chainwheel Product Catalog Standard Chainwheel Standard Chainwheels are our most economical model for operating valves in high, normally out-of-reach locations. Chainwheels easily attach to the hand wheel of valves

More information

Performance Literature for J125 Gas Pressure Regulators 1½ and 2 Sizes. Catalogue

Performance Literature for J125 Gas Pressure Regulators 1½ and 2 Sizes. Catalogue Catalogue and Performance Literature for J125 Gas Pressure Regulators 1½ and 2 Sizes Catalogue General Information Regulating Capacity Capacity Figures 1½ size Capacity Figures 2 size CS2503D DS2501B DS2502B

More information

CR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ

CR1-3 A-FGJ-A-E-HQQE 1x220/240 50HZ GRUNDFOS DATA BOOKLET CR1-3 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos Pump 96537538 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537538/cr-1-3-a-fgj-a-e-hqqe.html

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

Two-port seat valves with male thread, PN16

Two-port seat valves with male thread, PN16 4 363 Two-port seat valves with male thread, PN6 VVG4... Two-port seat valves with male thread, PN6 Bronze Rg5 DN5... DN50 mm (½"... 2") k vs 0.63... 40 m 3 /h Stroke 20 mm Can be equipped with actuators

More information

CLASS 400 FORGED BRASS BALL VALVE

CLASS 400 FORGED BRASS BALL VALVE CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:

More information

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs

Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls

More information

CR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ

CR3-19 A-FGJ-A-E-HQQE 3x230/400 50HZ GRUNDFOS DATA BOOKLET CR3-19 A-FGJ-A-E-HQQE 3x23/4 5HZ Grundfos Pump 96516663 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96516663/cr-3-19-a-fgj-a-e-hqqe.html

More information

megaflo BSP Pressure Relief Vent

megaflo BSP Pressure Relief Vent Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the

More information

Technische Dokumentation Technical Documentation

Technische Dokumentation Technical Documentation Technische Dokumentation Technical Documentation XOMOX Fully Lined Check Valves Dok. Nr.: tdb_check_gb XOMOX International GmbH & Co. Von-Behring-Straße 15 D-88131 Lindau / Deutschland Januar 2008 Table

More information

PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10

PART NUMBER POLE DIAMETER RANGE CARTON QTY  to 5  to 6 3 4  to 7 3 4  to 8 3 4 10 PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1

More information

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator

Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency

More information

FHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters

FHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters High Pressure fi lters FHF5 series Maximum pressure up to 50 bar Flow rate up to 500 l/min housing according to SAE J066 for HF filter s 95 High Pressure fi lters FILTER SIZING The correct filter sizing

More information

Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244

Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve

More information

KRONE - Profi Liner. Quantity: 2 Type: SDP 27 elp3-cs. Technical specification/description

KRONE - Profi Liner. Quantity: 2 Type: SDP 27 elp3-cs. Technical specification/description KRONE - Profi Liner Quantity: 2 Type: SDP 27 elp3-cs Technical specification/description FIN-registration (Finland) Without country symbol sticker Lettering on manufacturers plate: Type: SD National type

More information

SRY. Ceiling mounted linear disc diffuser for supply air QUICK FACTS

SRY. Ceiling mounted linear disc diffuser for supply air QUICK FACTS Ceiling mounted linear disc diffuser for supply air QUICK FACTS flexible spread pattern Facility for vertical spread Facility for simultaneous vertical/horizontal spread Large induction effect Suitable

More information

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE

More information

NAF-Triball ball valve

NAF-Triball ball valve NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application

More information

JUMO MIDAS Pressure transmitter

JUMO MIDAS Pressure transmitter Phone: +44 19 635533 Fax: +44 19 6356 Data Sheet 401001 Page 1/5 JUMO MIDAS Pressure transmitter Brief description Pressure transmitters are used for measuring the relative (gauge) pressure in liquids

More information

Espagnolette ASSA 550

Espagnolette ASSA 550 Espagnolette ASSA 550 550 Used on inside of cupboard doors and hatches of wood or steel. Features Three-point closing with one single turn. Right and left is decided by the two stop pins, which are fixed

More information

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)

FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016) General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,

More information

AVQMT. AVQT controller can be combined with AVT or STM thermostatic actuators.

AVQMT. AVQT controller can be combined with AVT or STM thermostatic actuators. Data sheet Flow and temperature controller with / without integrated control valve (PN 25) AVQT - flow and temperature controller AVQMT - flow and temperature controller with integrated control valve Description

More information

Reinforced edge channels KE-100

Reinforced edge channels KE-100 Drainage with system Technical data sheet Reinforced edge channels KE-100 ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation

More information

AIR SHOWER & TUB REP

AIR SHOWER & TUB REP SHOWER & TUB REPAIR 02-2091 Price Pfister, Ball Joint, O-Ring, 403927 For Shower Head. 03-1251 403954 Fiberglass Shower Drain, Fits 2 Cast Iron, Steel, ABS, or PVC, Seals With Compression Gasket. 02-3027

More information

CR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz

CR15-10 A-F-A-E-HQQE 11kW 3x400D 50Hz GRUNDFOS DATA BOOKLET CR15-1 A-F-A-E-HQQE 11kW 3x4D 5Hz Grundfos Pump 965191 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/965191/cr-15-1-a-f-a-e-hqqe.html

More information

ABS submersible sewage pump AFP

ABS submersible sewage pump AFP BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance

More information

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p. contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug

More information

14 HH EAC/CTP CE RoHS-II conform

14 HH EAC/CTP CE RoHS-II conform Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand

More information

NDA-25 MKI - Rescue Boat Davit

NDA-25 MKI - Rescue Boat Davit NDA-25 MKI - Rescue Boat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0038 Rev. Date: 11.10.2016 Rev. No: 3 Tel: +47 37 05 85 00 Fax: +47 37 05 85

More information

2/2-way Solenoid Valve for liquids and gases

2/2-way Solenoid Valve for liquids and gases 2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased

More information

AVK UK GROSS PRICE LIST 2017

AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK GROSS PRICE LIST 2017 AVK UK PRICE LIST 2017 AVK UK is part of the globally renowned AVK Group, one of the leading manufacturers of valves for the water, gas and waste

More information

CRE45-1 A-F-A-E-HQQE 3x HZ

CRE45-1 A-F-A-E-HQQE 3x HZ GRUNDFOS DATA BOOKLET CRE45-1 A-F-A-E-HQQE 3x4 5 HZ Grundfos Pump 96123387 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/cre45/96123387/cre-45-1-a-f-a-e-hqqe.html

More information

CR5-26 A-FGJ-A-E-HQQE 3x400D 50HZ

CR5-26 A-FGJ-A-E-HQQE 3x400D 50HZ GRUNDFOS DATA BOOKLET CR5-26 A-FGJ-A-E-HQQE 3x4D 5HZ Grundfos Pump 96513391 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96513391/cr-5-26-a-fgj-a-e-hqqe.html

More information

Hawle Haku PE Pipe Saddle

Hawle Haku PE Pipe Saddle Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.

More information

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE

KEYSTONE BUTTERFLY VALVE PARASEAL RANGE The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,

More information

Insulated Crimp Terminals

Insulated Crimp Terminals CONTENTS PVC Insulated ring terminals 3 PVC insulated spade terminals 3 PVC insulated pin terminals 4 PVC insulated blade terminals 4 PVC insulated butt connectors 4 PVC insulated female disconnectors

More information

ERHARD is a company of. Datasheet ERHARD ABS Premium service valve

ERHARD is a company of. Datasheet ERHARD ABS Premium service valve ERHARD is a company of Datasheet ERHARD ABS Premium service valve ERHARD ABS Premium service valve The innovative tapping systems With the new it has been possible to reduce the number of required models

More information

Benteler Distribution. Steel tube solutions for hydraulic and pneumatic applications

Benteler Distribution. Steel tube solutions for hydraulic and pneumatic applications Benteler Distribution Steel tube solutions for hydraulic and pneumatic applications Benteler Distribution Customized steel tube solutions for challenging requirements Benteler Distribution is an internationally

More information

Cooper & Turner Ltd STRUCTURAL

Cooper & Turner Ltd STRUCTURAL Cooper & Turner Ltd STRUCTURAL Page 1 of 6 Dimensions of Fully Threaded Bolts/Setscrews CHARACTERISTIC STANDARD Thread d M12 M16 M20 M24 M30 M36 p (pitch) 1.75 2 2.5 3 3.5 4 a max. 5.3 6 7.5 9 10.5 12

More information

Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range

Butterfly valves. ARI-ZIVA -Z - Fig Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z - Fig. 014 - Free of maintenance wafer pattern butterfly valve - soft sealed - industrial range ARI-ZIVA -Z / ARI-ZIVA -G Butterfly valves ARI-ZIVA -G - Fig. 015 - Free of maintenance butterfly

More information

Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C)

Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 Fig. 070 ARI-EURO-WEDI - Hood valve Fig.

More information

INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS

INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS SECTION 3 General INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS Commercial shackles are not to be used for lifting purposes. Should extreme circumstances or shock loadings be applicable, this must be taken

More information

Air vane motors for special applications

Air vane motors for special applications Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high

More information

NDA-25B MKI Fast Rescue Boat Davit

NDA-25B MKI Fast Rescue Boat Davit NDA-25B MKI Fast Rescue Boat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0039 Rev. Date: 14.11.2016 Rev. No: 2 Tel: +47 37 05 85 00 Fax: +47 37 05

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

More information

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.

CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional

More information

Angle Seat Valve 7010

Angle Seat Valve 7010 Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

More information

ETHERMA 4-SPEED CIRCULATOR PUMPS

ETHERMA 4-SPEED CIRCULATOR PUMPS -SPEED CIRCULATOR PUMPS -speed circulator pups with otor ounted directly into the pup body. The switch allows to obtain different perforance curves guaranteeing greater flexibility and haroniously satisfying

More information

Sand Trap Louvers OSTL 300 SERIES. Sand Trap Louvers

Sand Trap Louvers OSTL 300 SERIES. Sand Trap Louvers Model : OSTL GI 341 Description: OPTIMA make Sand Trap Louver is used as pre-filter for the protection of air conditioning plants in area exposed to extreme levels of industrial pollution. It has a high

More information

Inductive conductivity meter

Inductive conductivity meter Inductive conductivity meter Type 8228 can be combined with... Configurable outputs: up to 2 transistor and up to 2 analog 4... 20 ma outputs Removable backlighted display Simulation of process values

More information

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................

More information