Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.
|
|
- Ariel Copeland
- 5 years ago
- Views:
Transcription
1 Pipes & Fittings
2 SHIELD
3 Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive and of assured quality. We stay ahead of today s evolving market requirements by coitting to a program of continued research and development. We are able to maintain our high standards by ensuring that our worldwide manufacturing networks are the most advanced in the industry in Europe, sia and merica in terms of quality and delivery lead time. Our fully experienced and professional staff is there to provide engineering expertise and after sales service exactly when you need it. Combine this with highly responsive and customer focused network of distribution centres around the world, you will find that customer satisfaction is what we excel at. We are justifiably proud of our global client base. With offices and facilities in the UK and Middle East, we are able to comprehend the specific needs of your particular region.
4 SHIELD PIPING SSTEM Trusted Worldwide
5 Contents Pipes Pipes (BS 1387) Pipes (STM 53) Page 2 3 Threaded Fittings 4 Elbow 90 SDT100 Reducing Elbow 90 SDT101 Elbow 45 SDT0 Tee SDT12 Reducing Tee SDT53 Reducing Coupling SDT Cross SDT13 Reducing Cross SDT51 Straight Coupling SDT22 Plug SDT55 Cap SDT14 Hex Bushing SDT57 Union SDT59 Hex Nipple SDT11 Hex Reducing Nipple SDT111 Grooved Fittings 10 Rigid Coupling Standard SDG22 Rigid Coupling Light SDG Flexible Couplings Heavy Duty SDG27 Flexible Couplings Standard SDG Flexible Couplings Light SDG21 Reducing Couplings SDG Elbows 90 SDG100, 45 SDG0, 90 SDG105 Elbows 22.5 SDG2, 11. SDG112 Tee SDG12, Cross Tee SDG13, Tee SDG102 Cap SDG14 Grooved Flange SDG15, daptor Flange SDG16 Reducing Tee SDG53 Concentric Reducer Grooved SDG35, Threaded SDG37 Eccentric Reducer Grooved SDG33 Mechanical Tee Threaded Outlet SDG42 Mechanical Tee Grooved Outlet SDG44 Mechanical Cross Threaded SDG47 Mechanical Cross Grooved SDG49 Mechanical Tee UBolt SDG40 Groove Specifications Pipe Support & ccessories 29 Swivel Hanger SDHB Clevis Hanger SDHC Pipe Clamp with Lining SDGERLC Pipe Clamp SDGEPPC U Strap Hanger with Lining SDGERUS U Strap Hanger SDGEUS Riser Hanger or Clamp with Lining SDGERRC Riser Hanger or Clamp SDGEPRC UBolt SDUB Rubber Support Insert SDRSI Threaded Rod SDTR Beam Clamp SDCBC
6 Pipes Technical Data Black and hot dipped galvanized steel welded pipes Conforming to BS 1387:1985 (EN 105) C l a s s Bore Outside Diameter Max. Min. Wall Thickness Weight of Black Pipes Weight of Galvanised Pipes (Calculated) Plain Ended Screwed & Socketed Plain Ended Screwed & Socketed kg/mtr mtr/ton ft/ton kg/mtr mtr/ton ft/ton kg/mtr mtr/ton ft/ton kg/mtr mtr/ton ft/ton No. of pipes packed per standard bundle (1 Tonne pprox.) L I G H T () 1 / / / / / M E D I U M (B) 1 / / / / / H E V (C) 1 / / / / / Tolerances: THICKNESS: Light Tube 8%, Medium and Heavy Tubes 10%. WEIGHT: Single Tube +10% 8%, Quantity 150 metres and above of one size & class ±4%. LENGTH: 6 metres ±0.05 metres SHIELD reserves the right to change the contents without notice. 2
7 Pipes Seamless steel pipe & welded steel pipe to STM 53, Grade & B (s, & Weights) * * Pipe size O.D. Schedule 10 Schedule Schedule Standard Schedule 40 Schedule 60 Schedule 80 Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. 3 / / / / / / / Tensile Requirements Grade Grade B Tensile Strength, Min, Psi [MPa] 48,000 [3] 60,000 [415] ield Strength, Min, Psi [MPa],000 [5] 35,000 [240] Hydrostatic pressure test applied as per STM Standards reserves the right to change the contents without notice. Wall = Wall thickness in Wt. = Weight in Kg / Mtr. vailable in black & hot dipped galvanized * UL & FM details are available in their respective certificates. 3
8 Threaded Fittings Threaded Fittings feature a complete range of ductile iron / malleable iron threaded fittings in a wide variety of configurations in sizes from 1/2" to 6". fittings are UL, ULC listed and FM approved for water line and fire protection applications. Materials Ductile iron STM 536, BS EN 1563 Malleable Iron BS EN 1562 Max. Working Pressure PSI merican Standard SME B16.3, B16.4, B16.14, Unions B16.39 British Standard BS EN 10242, BS 143 & 16 Threads Finish merican Standard NSI B1..1 British Standard BS 21, ISO 7/1 (Taper) Black or hot dipped galvanized 4
9 Threaded Fittings SDT100 ELBOW 90 UL/FM : ½" to 4" 1 / / / / / / SDT101 REDUCING ELBOW 90 B UL/FM : ¾" to 3" B 3 /4 x 1 / x 1 / x 3 / /4 x 1 / /4 x 3 / /4 x /2 x 1 / /2 x 3 / /2 x /2 x 1 1 / x 3 / x x 1 1 / /2 x /2 x 1 1 / x 2 1 / x x SDT0 ELBOW 45 UL/FM : ½" to 2½" 1 / / / / / / SHIELD reserves the right to change the contents without notice. 5
10 Threaded Fittings SDT12 TEE UL/FM: ½" to 4" 1 / / / / / / SDT53 REDUCING TEE B C Inlet Run Branch C Inlet C Inlet Branch B UL/FM: ¾ to 2½ Branch B UL/FM: ¾ to 3 Run Run 3/4 3/4 1/ / /4 1 / / / / / / /4 1 1 / / /4 3 / / / / / /2 1 1 /4 3 / / / / / / / / / / / / / / /2 2 3 / Note: s available upto 6" x 6" x 2" SHIELD reserves the right to change the contents without notice. 6
11 Threaded Fittings SDT REDUCING COUPLING UL/FM: ½" to 1½" 3 /4 x 1 / x 1 / x 3 / /4 x 3 / /4 x /2 x SDT13 CROSS 1 1 /2 x 1 1 / x x 1 1 / x 1 1 / /2 x Note: s are available up to 6" B B UL/FM : 1" to 2" B / / / / B B UL/FM : 1¼" to 2" SDT51 REDUCING CROSS B 1 1 /4 x 1 1 /4 x 1 x l 1 /2 x 1 1 /2 x 1 x x 2 x 1 x /2 x 2 1 /2 x 2 x x 3 x 2 x SHIELD reserves the right to change the contents without notice. 7
12 Threaded Fittings SDT22 STRIGHT COUPLING UL/FM : ½" to 2½" 1 / / / / SDT55 PLUG / Note: s are available up to 6" B UL/FM : ½" to 2" B 1 / / / / / / SDT14 CP Note: s are available up to 6" UL/FM : ½" to 2½" 1 / / / / / SHIELD reserves the right to change the contents without notice. 8
13 Threaded Fittings SDT57 HEX BUSHING UL/FM: ¾" to 2" 1 x 1 / x 3 / /4 x /2 x /2 x 1 1 / x x 1 1 / x 1 1 / SDT59 UNION UL/FM: 1" to 2" 1 / / / / / SDT11 HEX NIPPLE B B 1 / / / / / SDT111 HEX REDUCING NIPPLE 1 /4 x 1 /8 1x 3 /4 1 /4 x 1 /2 2 x 1 1 /2 2 1 /2 x /2 x 1 /4 2 1 /2 x 1 1/2 2 1 /2 x 2 3 x 1 /2 3 x 2 3 x 2 1 / SHIELD reserves the right to change the contents without notice. 9
14 Grooved Fittings The Grooved System provides an economical and efficient piping system solution and offers significant benefits when compared to conventional types of pipe connections including: Faster Installation Because there is no need for welding or heating, the System ensures a safer and reliable working environment Ensures easy alignment Reduces noise and vibration Easy to install and remove in case of any maintenance requirements Feature a wide range of coupling and fittings for piping applications in ir Conditioning, Fire Fighting Systems and water pipe lines etc. Grooved Systems offer 3 types of couplings: High Pressure Couplings (Flexible) Medium Pressure Couplings (Rigid, Flexible) Light Pressure Couplings (Rigid, Flexible) Material Grooved Coupling housing and other grooved fittings are cast from Ductile Iron to STM 536 Grade in red paint or hot dipped galvanized, bolts are carbon steel to ISO class 8.8 heat treated. Gasket (C shaped) It is important to use the gasket that suits your application, use the table below to select the optimum gasket. Material Temp Range Colour General Recoended pplication EPDM 34 C to +110 C Green Strip Hot water service, variety of diluted acid, oil free air, chemical. This is NOT recoended for Petroleum services. Nitrile 29 C to +82 C Orange Strip Petroleum products, vegetable and mineral oils, air with oil vapours. This is NOT recoended for hot water +66 C or for hot dry air over +60 C. Silicone 34 C to +177 C Red Gasket Dry heat and air without hydrocarbons up to +177 C and certain chemicals SHIELD Grooved Coupling EPDM Gaskets must be lubricated on the lips and outside back prior to assembly using silicon based nonpetroleum lubricant. For more details about lubricant for other types of gasket, please contact us. 10
15 Rigid Coupling x SDG22 Standard Pipe O.D. Working Pressure PSI X Bolt/Nut No /8 x 55 1 / /8 x / /8 x /8 x / /2 x 60 3 O.D /2 x /2 x /2 x /2 O.D /8 x /8 x /2 O.D /8 x /8 x /4 x /4 x /8 x /8 x /8 x /8 x /8 x x 140 SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. Rigid Coupling provides rigid joints to prevent linear movement of pipe assembly. With a unique ends locked design, SDG22 coupling can be used when the application or design calls for rigid installations. 11
16 Light Rigid Coupling x SDG Pipe O.D. Working Pressure PSI X Bolt/Nut No /8 x 2 1 /8 2 1 / /8 x 2 1 /8 3 O.D /8 x 2 1 / /8 x 2 3 / /8 x 2 3 /4 5 1 /2 O.D /2 x /2 O.D /2 x /2 x /2 x 75 Flexible Couplings x SDG27 Heavy Duty Pipe O.D. Working Pressure PSI X Bolt/Nut No. SDG27 is a high pressure flexible coupling can be used in different applications where high pressure service is required /2 x / /2 x 75 3 O.D /2 x /2 x /8 x /4 x /2 O.D /4 x /4 x /8 x SHIELD reserves the right to change the contents without notice. Refer to UL/FM approvals for details.
17 Flexible Couplings X SDG Standard Pipe O.D. Working Pressure PSI X Bolt/Nut No. Flexible Couplings allow controlled angular movement of the pipe to assist alignment and installation. The advantage of flexibility must be considered in the design for hanger and support spacing. 1 1 / /8 x / /8 x /8 x / /8 x 55 3 O.D /8 x /2 x /2 x /2 O.D /8 x /8 x /2 O.D /8 x /8 x /4 x /4 x /8 x /8 x /8 x /8 x /8 x x 140 SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. 13
18 Light Flexible Coupling X SDG21 SDG21 is designed for a maximum working pressure of 0psi. The flexibility benefits of this coupling can be used in applications where high pressure is not required. Pipe O.D. Working Pressure PSI X /8 x / /8 x 55 3 O.D /8 x /8 x /8 x /2 O.D /2 x /2 O.D /2 x 80 Bolt/Nut No /2 x /8 x 95 SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. 14
19 Reducing Coupling X SDG SDG Reducing Coupling allows in line reduction of the pipe diameter on a piping run. SDG can also replace the need for two couplings as well as reducing fittings. Pipe O.D. Working Pressure PSI X 2 x 1 1 / x /8 x /2 x x /8 x 55 3 O.D x x /8 x 55 3 x x /2 x 55 3 x 2 1 / x /2 x 55 3 x 3 O.D 88.9 x /2x 55 4 x x /2 x 55 4 x 2 1 / x /2 x 55 4 x 3 O.D x /2 x 55 4 x x /2 x /2 O.D x x /8 x /2 O.D x x /8 x /2 O.D x x /8 x 85 6 x x /8 x 85 6 x x /8 x 85 8 x 6 1 /2 O.D x /4 x x x /4 x 115 Bolt/Nut No. SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. 15
20 90 & 45 Elbows 90 SDG100, 45 SDG0, 90 SDG SDG SDG0 90 SDG105 Pipe O.D. Working Pressure Working Pressure PSI PSI / / / O.D /2 O.D /2 O.D SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. 16
21 22.5 & 11. Elbows 22.5 SDG2 & 11. SDG Elbow 11. Elbow Pipe O.D. Working Pressure PSI / O.D /2 O.D SHIELD reserves the right to change the contents without notice. 17
22 Tees SDG12 Tee, SDG13 Cross Tee, SDG102 Tee SDG12 Tee SDG13 Cross Tee SDG102 Tee (Short) Pipe O.D. Working Pressure PSI Working Pressure PSI / / / O.D /2 O.D /2 O.D Cap SDG14 Reducing cross (grooved, threaded) are also available contact sheild for details. E Pipe O.D. Working Pressure PSI/Mpa Cap Dimension E 1 1 / / / O.D /2 O.D /2 O.D SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. 18
23 Grooved & daptor Flange W L X X E SDG15 Grooved Flange SDG15 & daptor Flange SDG16 PN10/PN16 SDG16 Pipe O.D. Max. Working Pressure PSI W Grooved Flange X E Bolt / Nut No. L daptor Flange X Bolt / Nut No. 1 1 /2 2 3 O.D /2 O.D 6 1 /2 O.D x50 2x50 2x50 2x50 2x55 2M12x65 2M12x65 2M12x /8 x /8 x /8 x 70 4M16 4M16 4M16 8M16 8M16 8M16 8M 8M 12M 12M24 12M M16 4M16 4M16 8M16 8M16 8M16 8M 8M 12M 12M24 12M24 NSI 1/150 Pipe O.D. Max. Working Pressure PSI X Grooved Flange E Bolt / Nut No. L daptor Flange X Bolt / Nut No. 2 1 / x50 2x50 2x55 2M12x65 2M12x /8 x /8 x /8 x /8 4 5 /8 8 5 /8 8 3 /4 8 3 /4 8 3 / / / /8 4 5 /8 8 5 /8 8 3 /4 8 3 /4 8 3 / / /4 Class 0 Grooved Flange 2 1 / O.D. of Flange X I.D. E Thickness PCD O.D. Inc. Bolt W Bolt 8 3 /4 8 3 /4 8 3 / / /8 SHIELD reserves the right to change the contents without notice Refer to UL/FM approvals for details. 19
24 Grooved Reducing Tee SDG53 Pipe O.D. Working Pressure PSI 2 x x x 1½ 60.3 x O.D x x x x x x x 3 O.D 88.9 x x x x x x 3 O.D x x x ½ O.D x x ½ O.D x 3 O.D x ½ O.D x x ½ O.D x x x x ½ O.D x x ½O.D x 3 O.D x ½ O.D x x ½ O.D x x ½ O.D x 51/2 O.D x x x x 2½ x x x x x x x x 3 O.D x x x x x x 5½ O.D x x 6½ O.D x x x x 6½ O.D x x x x x x x SHIELD reserves the right to change the contents without notice Please refer to UL/FM approvals for details. Reducing tee SDG55 threaded outlet are also available, contact for details.
25 EE EE Concentric Reducer Grooved SDG35 & Threaded SDG37 Pipe O.D. Working Pressure SDG35 Grooved EE SDG37 Threaded EE PSI 2 x 1 1 / x x 1 1 / x /2 x x O.D x x x x x 1 1 / x x x x 2 1 / x x 3 O.D 88.9 x x 1 1 / x x 1 1 / x x x x 2 1 / x x 3 O.D x x x /2 O.D x x /2 O.D x 3 O.D x /2 O.D x x /2 O.D x x /2 O.D x x /2 O.D x 3 O.D x /2 O.D x x /2 O.D x x /2 O.D x 5 1 /2 O.D x SHIELD reserves the right to change the contents without notice Please refer to UL/FM approvals for details. 21
26 Concentric Reducer(Continued) Grooved SDG35 & Threaded SDG37 Pipe O.D. Working Pressure PSI SDG35 Grooved EE 6 x x x 2 1 / x x 3 O.D x x x x x x 5 1 /2 O.D x x x x 2 1 / x x x x x x 5 1 /2 O.D x x x x 6 1 /2 O.D x x x x 6 1 /2 O.D x x x x x x x x x x x x x x x SDG37 Threaded EE Grooved Eccentric Reducer EE Grooved SDG33 Grooved x Grooved Pipe O.D. Working Pressure PSI SDG33 Grooved EE 4 x 3 O.D x x x /2 O.D x x /2 O.D x x /2 O.D x x /2 O.D x 5 1 /2 O.D x x x SHIELD reserves the right to change the contents without notice Please refer to UL/FM approvals for details.
27 Threaded Outlet Mechanical Tee V W SDG42 Run x Branch Pipe O.D. Working Pressure PSI Hole Dia +1.6 V W Bolt Mechanical Tees allow a direct branch connection to be made on a pipe run where sufficient space allows a hole to be cut. Material: Ductile Iron STM 536. Gasket material EPDM. Threads are available to BSPT or NPT and can be supplied in red coating or hot dipped galvanized. 2 x x /8 x 55 2 x 1 1 / x /8 x 55 2 x 1 1 / x /8 x /2 x 3 / x /2x /2 x x /2 x /2 x 1 1 / x /2 x /2 x 1 1 / x /2 x 60 3 O.D x x /2 x 75 3 O.D x 1 1 / x /2 x 75 3 O.D x 1 1 / x /2 x 75 3 x x /2x 75 3 x 1 1 / x /2 x 75 3 x 1 1 / x /2x 75 3 x x /2 x 75 4 x 1 / x /2 x 75 4 x 3 / x /2 x 75 4 x x /2 x 75 4 x 1 1 / x /2 x 75 4 x 1 1 / x /2 x 75 4 x x /2x 75 4 x 2 1 / x /2 x 75 4 x x /2 x /2O.D x x /8 x /2O.D x 1 1 / x /8 x /2O.D x 1 1 / x /8 x 85 51/2 O.D x x /8 x /2O.D x 3 O.D x /8 x /2O.D x x /8 x 85 5 x 1 1 / x /8 x /2O.D x 1 / x /8 x /2O.D x 3 / x /8 x /2O.D x x /8 x /2O.D x 1 1 / x /8 x /2O.D x 1 1 / x /8 x /2O.D x x /8 x /2O.D x 3 O.D x /8 x 110 SHIELD reserves the right to change the contents without notice. 23
28 SDG42 (Continued) V W Run x Branch Pipe O.D. Working Pressure PSI Hole Dia +1.6 V W Bolt 6 1 /2 O.D x x /8 x /2 O.D x x /8 x x 1 / x /8 x x 1 / x /8 x x x /8 x x 2 1 / x /8 x x x /8 x x x /4 x x 1 1 / x /4 x x 1 1 / x /4 x x x /4 x x 2 1 / x /4 x x x /4 x x x /4 x 115 SHIELD reserves the right to change the contents without notice. The mechanical tee and cross features a gap between the bolt pads. Do not attempt to bring bolt pads together which would result in metal to metal when tightening bolts and nuts. Note that excessive torque may cause joint failure the following table provides recoended bolt fastening torque. Bolt Recoended Bolt Torque N m 3 /8" 40 ~ 60 1 /2" 110 ~ /8" 135 ~ /4" 175 ~ /8" 245 ~ 3 24
29 Grooved Outlet Mechanical Tee V W SDG44 Run x Branch Pipe O.D. Working Pressure PSI Hole Dia /2 x 1 1 / x /2 x 60 3 x x /2 x 75 4 x x /2 x 75 4 x 2 1 / x /2 x 75 4 x 3 O.D x /2 x 75 4 x x /2 x /2 O.D x x /8 x /2 O.D x 3 O.D x /8 x /2 O.D x x /8 x /2 O.D x x /8 x /2 OD x 3 O.D x /8 x /2 O.D x x /8 x /2 O.D x x /8 x x x /8 x x x /8 x x x /4 x x 3 O.D x /4 x 115 V W Bolt 8 x x /4 x x x /4 x 115 SHIELD reserves the right to change the contents without notice.
30 V V Threaded Mechanical Cross SDG47 Run x Branch Pipe O.D. Working Pressure PSI Hole Dia +1.6 V Bolt 2 x x /8 x 55 2 x 1 1 / x /8 x 55 2 x 1 1 / x /8 x /2 x 3 / x /2 x /2 x x /2 x /2 x 1 1 / x /2 x /2 x 1 1 / x /2 x 75 3 O.D x x /2 x 75 3 O.D x 1 1 / x /2 x 75 3 O.D x 1 1 / x /2 x 75 3 x x /2 x 75 3 x 1 1 / x /2 x 75 3 x 1 1 / x /2 x 75 3 x x /2 x 75 4 x 1 / x /2 x 75 4 x 3 / x /2 x 75 4 x x /2 x 75 4 x 1 1 / x /2 x 75 4 x 1 1 / x /2 x 75 4 x x /2 x 75 4 x 2 1 / x /2 x 75 4 x 3 O.D x /2 x 75 4 x x /2 x /2 O.D x x /8 x /2 O.D x 1 1 / x /8 x /2 O.D x 1 1 / x /8 x /2 O.D x x /8 x /2 O.D x 3 O.D x /8 x /2O.D x 3 / x /8 x /2 O.D x x /8 x /2 O.D x 1 1 / x /8 x /2 O.D x 1 1 / x /8 x /2 O.D x x /8 x /2 O.D x 3 O.D x /8 x x x /8 x x 2 1 / x /8 x x x /8 x x 1 1 / x /4 x x 1 1 / x /4 x x x /4 x x 3 O.D 219.1x /4 x SHIELD reserves the right to change the contents without notice.
31 Grooved Mechanical Cross V V SDG49 Run x Branch 2 1 /2 Pipe O.D. Working Pressure PSI Hole Dia +1.6 V Bolt x 1 1 / x /2 x 60 3 x x /2 x 75 4 x x /2 x 75 4 x 2 1 / x /2 x 75 4 x 3 O.D x /2 x 75 4 x x /2 x /2 O.D x x /8 x /2 O.D x 3 O.D x /8 x /2 O.D x x /8 x /2 O.D x x /8 x /2 O.D x 3 O.D x /8 x /2 O.D x x /8 x /2 O.D x x /8 x x x /8 x x x /8 x x x /4 x x 3 O.D x /4 x x x /4 x x x /4 x 115 SHIELD reserves the right to change the contents without notice. 27
32 UBolt Mechanical Tee SDG40 Hole Dia +1.6 Working Pressure PSI X U Bolt 1 1 /4 x 1 / /8 x /4 x 3 / /8 x /4 x /8 x /2 x 1 / /8 x /2 x 3 / /8 x /2 x /8 x 67 2 x 1 / /8 x 82 2 x 3 / /8 x 82 2 x /8 x /2 x 1 / /8 x /2 x 3 / /8 x /2 x /8 x 95 X Groove Specifications B t O.D C F d Pipe Outside Diameter Tolerance Gasket Seat ctual (+) () (+/)0.0 Groove Diameter C Groove Width B Groove Depth d Tolerance (+)0.000 Roll Groove (+/)0.0 Cut Groove (+/)0.031 Minimum Pipe Wall Thickness t Roll Groove Cut Groove Max F Flare Dia. Roll Groove 1 / / / OD /2 OD SHIELD reserves the right to change the contents without notice. 28
33 Swivel Ring Hanger Model : SDHB Function Designed for the suspension of noninsulated stationary pipe lines. The insert nut allows a vertical adjustment after installation, is tapped to NFP reduced rod size standards. SDHBF has a layer of felt which separates the pipe from the hanger to reduce vibration and sound. C B Federal Specification WWH171E & 1192 (Type 10) Manufacturers Standardization Society MSS SP69 & SP58 (Type 10) UL Listed/FM pproved. D Material and Finish : PreGalvanized coil adheres to STM 653 G90 E SDHB Pipe Rod B dj. C D E Max. Load lbs. 1 /2 3 /8 1 7 /8 1 7 / /4 3 1 / /4 3 / / /8 2 1 /2 3 1 / /8 1 5 / /2 3 3 / /4 3 / / / / / /2 3 /8 2 1 /8 1 1 / /8 3 7 / /8 2 7 / /8 3 5 / / /2 3 /8 2 3 /4 1 1 / / /8 2 7 /8 1 1 /8 3 3 /4 5 9 / /2 3 /8 3 3 /8 1 3 /8 4 5 / / /8 3 7 /8 1 1 /2 4 1 / /2 4 5 /8 1 5 /8 5 5 /8 8 3 / /2 5 5 /8 2 1 /4 6 1 / / / / / / / Note: a) Swivel Nut is coming along with hanger. b) Swivel Nut is available for 10 and 12 Rod size c) Refer to UL/FM certificates for more information 29
34 Clevis Hanger Model : SDHC Function Designed for the suspension of noninsulated stationary pipe lines. SDHCF has a layer of felt which separates the pipe from the hanger to reduce vibration and sound. C B D E Federal Specification WWH171E & 1192 (Type 1) Manufacturers Standardization Society MSS SP69 & SP58 (Type 1) UL Listed/FM pproved. Material : PreGalvanized coil (upto 4 ) adheres to STM 653 G90 or and Finish Low Carbon Steel Electro Galvanized to STM B633 or Low Carbon Steel Hot dipped galvanized to STM 123 SDHC Pipe 1 /2 Rod B C dj. D E Cross Bolt Max. Load lbs. 3 /8 2 7 / /8 1 1 /8 2 1 / /4 3 /8 2 5 /8 3 1 /8 1 1 /4 2 3 /16 1 / /8 3 1 / /4 1 5 /8 2 5 /8 1 1 /4 1 1 /2 3 /8 3 3 /8 4 3 / / /16 3 /8 3 1 /2 4 7 / /2 3 1 / /8 3 3 / /8 3 5 / /2 1 / / / / /2 3 7 /8 5 3 /8 1 1 /8 3 1 /4 3 / /2 4 1 / /8 3 5 /8 3 / /2 1 /2 4 1 /2 6 1 /2 1 1 /4 3 7 /8 3 / /8 5 1 / / / /16 3 / /8 6 1 /8 9 1 /8 1 7 /8 5 5 /16 1 / /4 6 7 / /8 1 5 /8 6 1 / /8 8 3 / /8 2 1 /8 7 7 /8 5 / /8 9 1 / /8 1 3 /4 8 1 /8 3 / / / / /2 3 / / /4 2 5 / /4 7 / / /8 2 5 / / / /2 1 /2 3 1 / / / / /8 1 1 / /4 1 / /4 4 3 / /8 1 1 / / / /8 5 1 / /2 1 1 / / /4 1 1 /2 9 Note: a) Use of an upper locknut ensures proper performance. Pipe spacers provided on and larger clevises. If ordering SDHCF felt lined hangers for pipe size of 3½ or under, order the next largest size to allow for the thickness of the felt lining. b) D djustment (Top of cross bolt to bottom of hanger rod nut). c) When an oversized clevis is used, a pipe spacer should be placed over the clevis bolt to prevent the lower Ustrap from moving inward.
35 Pipe Clamp With Lining Model : SDGERLC Features: Designed for Horizontal, ver cal and suspended installa ons. Suitable for Steel, copper and PVC pipes. Welded Nut / with op on of /M12. Connec on thread with / dualtapped boss. Side Screw: 6 x Phillip head with vicer. High rigidity due to reinforcing rib. With highly elas c vibra on control lining, vibra on control tested. D H E C Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 (Type 12) Federal Specifica on WWH171E & 1192 (Type ) Material: Mild Steel & EPDM Rubber. Finishing: Electro galvanized as per STM B633 Standards. B Model No SDGERLC ⅜ SDGERLC ½ SDGERLC ¾ SDGERLC 1 SDGERLC 1¼ SDGERLC 1½ SDGERLC 1½54 SDGERLC 2 SDGERLC 263 SDGERLC 270 SDGERLC 2½ SDGERLC 2½83 SDGERLC 3 SDGERLC 3½ SDGERLC 3½110 SDGERLC 4 SDGERLC 41 SDGERLC 4133 SDGERLC 5 SDGERLC 5150 SDGERLC 5160 SDGERLC 6 SDGERLC 6210 SDGERLC 8 SDGERLC 10 SDGERLC 12 Pipe O.D H E B C D Load Kg ⅜ ½ ¾ 1 1¼ 1½ 2 2½ 3 3½ Notes: Measurements are subject to 5% tolerance. Other s available on request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce. 31
36 Pipe Clamp With Lining Model : SDGERLC Selection of Lined Pipe Hangers for Different Types of Pipes: Model No Copper Steel (SCH 40) UPVC / PE BS SDGERLC ⅜ 15, SDGERLC ½ 22 ½ 22 DN15 (21.4) SDGERLC ¾ 24, 28 ¾ 28 DN (26.8) SDGERLC , 38 DN (33.6) SDGERLC 1¼ 42 1¼ 42 40, 43 DN32 (42.3) SDGERLC 1½ 1½ DN40 (48.3) SDGERLC 1½ SDGERLC DN50 (60.4) SDGERLC 263 SDGERLC , SDGERLC 2½ 76 2½ DN65 (75.4) SDGERLC 2½ SDGERLC SDGERLC 3½ 102, DN80 (88.9) SDGERLC 3½ SDGERLC DN100 (114.3) SDGERLC SDGERLC SDGERLC DN1 (21.4) SDGERLC SDGERLC SDGERLC DN150 (168.3) SDGERLC SDGERLC , 2 DN0 (2.0) SDGERLC 10 0 DN2 (0.4) SDGERLC 12 DN0 (315.5) Notes: Measurements are subject to 5% tolerance SHIELD reserves the right to change the contents without notice. 32
37 Pipe Clamp Model : SDGEPPC Features: Designed for Horizontal, ver cal and suspended installa ons. Welded Nut / with op on of /M12. High Strength round welded connec ng nuts. The two locking screws allow adjustment. Can be used as a pipe anchor point. Suitable for installa ons without vibra on control requirements. D H E C Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 (Type 12) Federal Specifica on WWH171E & 1192 (Type ) Material: Mild Steel. Finishing: Electro galvanized as per STM B633 Standards. B Model No Pipe O.D H E B C D Load Kg SDGEPPC ⅜ ⅜ SDGEPPC ½ ½ SDGEPPC ¾ ¾ SDGEPPC SDGEPPC 1 ¼ 1¼ SDGEPPC 1 ½ 1½ SDGEPPC 1 ½ SDGEPPC SDGEPPC SDGEPPC SDGEPPC 2 ½ 2½ SDGEPPC 2 ½ SDGEPPC SDGEPPC 3 ½ 3½ SDGEPPC 3 ½ SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC SDGEPPC Notes: Measurements are subject to 5% tolerance Other s available on request Hot Dipped Galvanized can be supplied upon request SHIELD reserves the right to change the contents without no ce. 33
38 U Strap Hanger with Lining Model : SDGERUS Features: Designed for mount plain or insulated pipes. It can be used as a pipe anchor with Rubber Support Insert also. Vibra on and Sound Control tested & verified with highly elas c lining. D Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 Federal Specifica on WWH171E & 1192 Material: Mild Steel & EPDM Rubber Finishing: Electro galvanized as per STM B 633 Standards B Model No Pipe Pipe O.D B Width Bolt Load Kg SDGERUS ½ ½" SDGERUS ¾ ¾" SDGERUS 1 1" SDGERUS 1¼ 1¼" SDGERUS 1½ 1½" SDGERUS 1½ SDGERUS 2 2" SDGERUS SDGERUS 2½ 2½" SDGERUS 2½ SDGERUS 3 3" SDGERUS 3½ 3½" SDGERUS 3½ SDGERUS 4 4" SDGERUS SDGERUS 5 5" SDGERUS SDGERUS SDGERUS 6 6" SDGERUS SDGERUS SDGERUS SDGERUS 8 8" SDGERUS SDGERUS M12 10 SDGERUS M12 10 SDGERUS 10 10" M18 10 SDGERUS M Notes: Measurements are subject to 5% tolerance. Other s available on request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce.
39 U Strap Hanger Model : SDGEUS Features: Designed for mount plain or insulated pipes. U Strap Hangers can be used as a pipe anchor with rubber support inserts also. Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 (Type 26) Federal Specifica on WWH171E & 1192 (Type 26) Material: Mild Steel. Finishing: Electrogalvanized as per STM B 633 Standards. D B Model No Pipe Pipe O.D B Width Bolt Load Kg SDGEUS ½ ½" SDGEUS ¾ ¾" SDGEUS 1 1" SDGEUS 1¼ 1¼" SDGEUS 1½ 1½" SDGEUS 1½ SDGEUS 2 2" SDGEUS SDGEUS 2½ 2½" SDGEUS 2½ SDGEUS 3 3" SDGEUS 3½ 3½" SDGEUS 3½ SDGEUS 4 4" SDGEUS SDGEUS 5 5" SDGEUS SDGEUS SDGEUS 6 6" SDGEUS SDGEUS SDGEUS SDGEUS 8 8" SDGEUS SDGEUS M12 10 SDGEUS M12 10 SDGEUS 10 10" M18 10 SDGEUS M18 10 Notes: Measurements are subject to 5% tolerance. Other s available on request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce. 35
40 Riser Hanger or Clamp with Lining Model : SDGERRC Features: Designed to act as a rigid support / guide for ver cal pipes to control the suspension in pipeline. Equallly useable in most of the pipe types. Strengthened bolts for high load capacity. Highly elas c lining for sound and vibra ons control. D Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 (Type 8) Federal Specifica on WWH171E & 1192 (Type 8) Bolt Material: Finishing: Mild Steel & EPDM Rubber Electrogalvanized as per STM B633 Standards. Model No Pipe Pipe O.D Bolt Load Kg SDGERRC ½ ½" SDGERRC ¾ ¾" SDGERRC 1 1" SDGERRC 1¼ 1¼" SDGERRC 1½ 1½" SDGERRC 2 2" SDGERRC 2½ 2½" M SDGERRC 3 3" M12 20 SDGERRC 4 4" M12 3 SDGERRC 6 6" M16 4 SDGERRC 8 8" M16 4 SDGERRC 10 10" M SDGERRC 12 12" M 70 Notes: Measurements are subject to 5% tolerance. Other s available on request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce. 36
41 Riser Hanger or Clamp Model : SDGEPRC Features: Designed to act as a rigid support for ver cal pipes to control the suspension in pipeline. Equallly useable in most of the pipe types. Strengthened bolts for high load capacity. Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 (Type 8) Federal Specifica on WWH171E & 1192 (Type 8) Material: Finishing: Mild Steel Electrogalvanized as per STM B633 Standards. D Bolt Model No Pipe Pipe O.D Bolt Load Kg SDGEPRC ½ ½" SDGEPRC ¾ ¾" SDGEPRC 1 1" SDGEPRC 1¼ 1¼" SDGEPRC 1½ 1½" SDGEPRC 2 2" SDGEPRC 2½ 2½" M SDGEPRC 3 3" M12 20 SDGEPRC 4 4" M12 3 SDGEPRC 6 6" M16 4 SDGEPRC 8 8" M16 4 SDGEPRC 10 10" M SDGEPRC 12 12" M 70 Notes: Measurements are subject to 5% tolerance. Other s available on request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce. 37
42 UBolt Model : SDUB Features: Designed to use as a support, anchor or guide for various types of pipes. High load capacity due to one piece design. Supplied with two Nuts & Washers. Special U bolts with Longer Tangents and Threads can be furnished upon request. Manufacturers Standardiza on Society NSI/MSS SP69 & SP58 (Type 24) Federal Specifica on WWH171E & 1192 (Type 24) Material: Finishing: Mild Steel Electro galvanized as per STM B 633 Standards. Model No Pipe D C F G SDUB ½ ½" SDUB ¾ ¾" SDUB 1 1" SDUB 1¼ 1¼" SDUB 1½ 1½" SDUB 2 2" SDUB 2½ 2½" SDUB 3 3" SDUB 4 4" SDUB 6 6" M SDUB 8 8" M SDUB 10 10" M SDUB 12 12" M SDUB 14 14" M SDUB 16 16" M SDUB 18 18" M SDUB " M SDUB 24 24" M Notes: Measurements are subject to 5% tolerance. Other s available on request. U Bolt sizes can be modified to match with Rubber support inserts. lternate rod sizes for different pipe sizes are also available. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce. 38
43 Rubber Support Insert Model : SDRSI Features: Very high load bearing capacity. Dimensionally accurate as each piece is moulded. Tongue and Groove design for small sizes. Unique DOVETIL lock for higher sizes. Excellent resistance to Deterioration / Distortion. vailable with steel reinforcements for higher sizes. WIDTH I.D. Material: EPDM Rubber Pipe s Schedule 40 Steel Pipe OD Width of Rubber Support Insert Part numbers for Rubber Support Insert Thickness ½ (13) ¾ (19) 1 () 1¼ (32) 1½ (38) 2 (50) 2½" (65) 3 (75) () () () () () () () () ½ SDRSI1301 SDRSI1901 SDRSI01 SDRSI3201 SDRSI3801 SDRSI5001 SDRSI6501 SDRSI7501 ¾ 26.7 SDRSI1302 SDRSI1902 SDRSI02 SDRSI3202 SDRSI3802 SDRSI5002 SDRSI6502 SDRSI SDRSI1303 SDRSI1903 SDRSI03 SDRSI3203 SDRSI3803 SDRSI5003 SDRSI6503 SDRSI7503 1¼ SDRSI1304 SDRSI1904 SDRSI04 SDRSI3204 SDRSI3804 SDRSI5004 SDRSI6504 SDRSI7504 1½ SDRSI1305 SDRSI1905 SDRSI05 SDRSI3205 SDRSI3805 SDRSI5005 SDRSI6505 SDRSI SDRSI1306 SDRSI1906 SDRSI06 SDRSI3206 SDRSI3806 SDRSI5006 SDRSI6506 SDRSI7506 2½ SDRSI1307 SDRSI1907 SDRSI07 SDRSI3207 SDRSI3807 SDRSI5007 SDRSI6507 SDRSI SDRSI1308 SDRSI1908 SDRSI08 SDRSI3208 SDRSI3808 SDRSI5008 SDRSI6508 SDRSI7508 3½ SDRSI1309 SDRSI1909 SDRSI09 SDRSI3209 SDRSI3809 SDRSI5009 SDRSI6509 SDRSI SDRSI1310 SDRSI1910 SDRSI10 SDRSI3210 SDRSI3810 SDRSI5010 SDRSI6510 SDRSI SDRSI1311 SDRSI1911 SDRSI11 SDRSI3211 SDRSI3811 SDRSI5011 SDRSI6511 SDRSI SDRSI1312 SDRSI1912 SDRSI12 SDRSI3212 SDRSI3812 SDRSI5012 SDRSI6512 SDRSI SDRSI1313 SDRSI1913 SDRSI13 SDRSI3213 SDRSI3813 SDRSI5013 SDRSI6513 SDRSI SDRSI1314 SDRSI1914 SDRSI14 SDRSI3214 SDRSI3814 SDRSI5014 SDRSI6514 SDRSI SDRSI1315 SDRSI1915 SDRSI15 SDRSI3215 SDRSI3815 SDRSI5015 SDRSI6515 SDRSI SDRSI1316 SDRSI1916 SDRSI16 SDRSI3216 SDRSI3816 SDRSI5016 SDRSI6516 SDRSI SDRSI1317 SDRSI1917 SDRSI17 SDRSI3217 SDRSI3817 SDRSI5017 SDRSI6517 SDRSI SDRSI1318 SDRSI1918 SDRSI18 SDRSI3218 SDRSI3818 SDRSI5018 SDRSI6518 SDRSI SDRSI1319 SDRSI1919 SDRSI19 SDRSI3219 SDRSI3819 SDRSI5019 SDRSI6519 SDRSI SDRSI13 SDRSI19 SDRSI SDRSI32 SDRSI38 SDRSI50 SDRSI65 SDRSI75 Notes: Measurements are subject to 5% tolerance. Other s available on request. SHIELD reserves the right to change the contents without notice. Self extinguishing ruber Inserts also available on request. 39
44 Threaded Rod Model : SDTR D L Features: Designed for use as a Double end Studs with a nut on either side or as studs. Right Handed. Coarse Threads. Coercial Nut Fit. Material: Low Carbon Steel Standard: DIN 975, steel Property Class 4.8 Finishing: inc Plated. D Coarse & Fine Thread Length (L) = 1000, 00 & 00 Thread (D) MM M4 M5 M6 M7 M12 M12 Diameter INCH Pitch MM Thread (D) MM M14 M16 M16 M18 M M M22 M24 M27 M Diameter INCH Pitch MM Thread (D) MM M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 Diameter INCH Pitch MM Notes: Measurements are subject to 5% tolerance. Other s available on request. Left Handed is vailable upon request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without notice. 40
45 Beam Clamp D B Model : SDCBC C Features: ¾ Beam Clamps are designed to clamp hanger rod to the beam s top flange or bar joist. Universal open U design allows for adjustments and permissible to use in an inverted posi on on the bo om flange of the beam also. Manufacturers Standardiza on Society NSI/MSS SP69 (Type 19 & 23) Federal Specifica on WWH171E (Type 23) & 1192 (Type 19 & 23) Material: Duc le iron STM 536 E Finishing: Electro galvanized as per STM B 633 Standards. Model No Rod Max. Pipe Load B C D E () lbs. SDCBC110 ⅜ (10) SDCBC115 ½ (12) Notes: Measurements are subject to 5% tolerance. Other s available on request. Hot Dipped Galvanized can be supplied upon request. SHIELD reserves the right to change the contents without no ce. 41
46
HANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationSEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
More informationSTANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationPipe hangers & ss floor drains
Pipe support systems, Pipe hangers & ss floor drains profile Sprinkler hanger ABOUT US: With over two decades of experience Aqua Arab Trading Co is a leading exporter and reseller of Hardware solutions
More informationPipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationCOOPLOK Grooved Submittal. Material Specifications
SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:
More informationMechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications
82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal
More informationSteel Pipe Nipples & Malleable Fittings
March 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Steel Pipe Nipples & Malleable Fittings b u i l d i n g c o n n e c t i o n s
More informationPipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationPipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
More informationSection 2. Shurjoint Grooved Fittings Flow Data / Friction Resistance Ductile Iron Grooved Fittings. Wrought Grooved Fittings
Section 2 Cast & Wrought Grooved Fittings Shurjoint Grooved Fittings... 56 Flow Data / Friction Resistance... 56 Ductile Iron Grooved Fittings 7110 / 7111 / 7112 / 7113 Elbows... 57 7120 / 7135 / 7130
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationSize Inches UL ULC FM. Pipe Sch.
IPS CARBON STEEL PIPE - FIRE PROTECTION PRODUCTS FireLock Rigid Coupling STYLE 005 WITH VIC-PLUS GASKET SYSTEM (NORTH AMERICA ONLY) FireLock Style 005 rigid coupling has a unique, patented angle-pad design
More informationFIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationStyle Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
More informationProduct Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
More informationAdvantages of Grooved Fittings
Grooved Fittings Advantages of Grooved Fittings Comparative Advantages Allows angular deflection-misalignment Expansion, contraction or, no need for expansion joint Reclaimable, no need for union Allows
More informationSECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationMalleable Iron. Pipe Fittings. American Standard MECH FLOW SUPPLIES JINAN MEIDE CASTING CO., LTD. JINAN MEIDE CASTING CO., LTD.
Malleable Iron Pipe Fittings JINN MEIDE CSTING CO., LTD. MECH FLOW SUPPLIES Malleable Iron Pipe Fittings JINN MEIDE CSTING CO., LTD. Ductile Iron Grooved Fittings and Couplings JINN MEIDE CSTING CO., LTD.
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationGRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
More informationPHD Manufacturing, Inc.
4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most
More informationPipe support systems & Pipe hangers. Stamp of Quality
Pipe support systems & Pipe hangers Stamp of Quality contents Introduction 4 Clevis Hanger 6 Sprinkler Hanger 8 Split Clamp with EPDM Lining 10 Plain Split Clamp 12 Split Clamp 14 Clevis Hanger 16 Clevis
More informationModel 7706 Reducing Coupling. Deg. Axial Displacement
MODEL 7706 REDUCING COUPLING The Model 7706 Reducing allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents
More informationFig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece
ig. xtension piece Range: " through " Material: Malleable iron Maximum Temperature: 40 Service: or attaching hanger rod to various types of building attachments. pprovals: UL Listed ( " - " rod size) and
More information030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50
030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.
More informationBRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
More informationSTAINLESS STEEL SYSTEMS
STAINLESS STEEL SYSTEMS 139 Systems Table of Contents Figure 472 Rigid Couplings Page 142 Figure 401 45 Elbows Page 149 Figure SS-7X Rigid Couplings (Large Diameter) Page 143 Figure 405 Flexible Couplings
More informationGRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Worldwide Contacts www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B0 and Model BN0 Butterfly
More informationHousing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,
More informationProduct Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
More informationPipe Fittings & Steel Nipples
Pipe Fittings & Steel Nipples www.anvilintl.com NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com UILDING CONNECTIONS THT LST For
More informationGROOVED FITTINGS. Products Catalog
JINN Products Catalog Contents Couplings igid Coupling Fl exible Coupling Fl exible educing Coupling Fittings Elbow Concentric educer Tee educing Tee Cross Cap Mechanical Tee Mechanical Tee Threaded Outet
More informationQuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS
H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationPipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips
Select Language Home Profile Products Contact Us Email Resources Brass Sanitary Fittings Brass Cable Glands Cable Gland Accessories Brass Fasteners Pipe Brackets - Pipe Support Systems Brass Pipe brackets
More informationGROOVED COUPLINGS - STANDARD FLEXIBLE Model 101
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationStainless Steel Pipe System. System No. Submitted By Spec Sect Para Location Date Approved Date TEMPERATURE ( F/ C)
The Victaulic Vic-Press 304 System for joining approved Type 304/304L stainless steel pipe provides a fast, easy, clean, reliable means for joining 1/2"/15, 3/4"/20, 1"/25, 1 1/2"/40, and 2"/50 stainless
More informationRapidrop Global Ltd. Wet & Dry Riser Equipment. British Manufacturer of Fire Detection & Suppression Equipment.
Rapidrop Global Ltd British Manufacturer of Fire Detection & Suppression Equipment Wet & Dry Riser Equipment Wet & Dry Riser Equipment Rapidrop Global Limited is the leading UK manufacturer of fire sprinkler
More informationGRINNELL Model B303 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Worldwide Contacts www.grinnell.com GRINNELL Model B Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Model B Butterfly Valves provide for efficient
More informationCLEVIS HANGER 401. Standard Duty B A
CLEVIS HNGER 40 Standard Duty Size Range: /2 through 24 Surface Finish: Electro-zinc plated non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationREQUEST PUBLICATION 18.11
* SEE VICTALIC PBLICATION 10.01 FOR DETAILS The Victaulic Pressfit 316 System for joining approved Type 316/316L stainless steel pipe provides a fast, easy, clean, reliable means for joining ½"/15, ¾"/
More informationMalleable Iron Pipe Fittings BS EN Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT.
Malleable Iron Pipe Fittings BS EN 10242 Patterns Sizes List Prices Prices effective from 1st September 2008 Exclusive of VAT. FM 20478 George Fischer Ltd. Profile of a Company In 1802 Johann Conrad Fischer
More information11.02 Mechanical-T Bolted Branch Outlets
STLES AND SEE ICTAULIC PUBLICATION 10.01 FOR DETAILS NIIPO ictaulic Mechanical-T Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive
More informationP I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS
MALLEABLE P I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS EN 10226-2 and
More informationSection 3. Stainless Steel Series. Shurjoint Stainless Steel Piping Series Grooved Mechanical Couplings. Cast Grooved Fittings.
Section 3 Stainless Steel Series Shurjoint Stainless Steel Piping Series... 84 Grooved Mechanical ouplings SS-5 Rigid oupling... 85 SS-7 Rigid oupling... 86 SS-7X Rigid oupling... 87 SS-8 Flexible oupling...
More informationTHOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationStyle 99 Roust-A-Bout Couplings
R IPS CARBON STEEL PIPE PLAIN END SYSTEM Style 99 Roust-A-Bout Couplings 14.02 VICTAULIC IS AN ISO 9001 CERTIFIED COMPANY PRODUCT DESCRIPTION 1 1 / 2-12" Sizes 14-18" Sizes Style 99 Roust-A-Bout couplings
More informationINDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
More informationMALLEABLE PIPE FITTINGS
M A L L E A B L E P I P E F I T T I N G S O UR GENI US I S PIPE FIT TI NG S Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS
More informationANVIL MANAGEMENT TEAM NORTH EAST REGION SOUTH EAST REGION IONAL, INC.
PF-0.02 NVIL PRODUCT LINES The Largest and Most Complete Fitting and Hanger Manufacturer in the World CORE MRKETS From plumbing, mechanical, and fire protection, to mining, oil and gas, and OEMs, our
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationOne Company, Three Businesses,Your Complete Solution! Product and Service Catalogue NSF61 G-372
One Company, hree usinesses,your Complete Solution! Product and Service Catalogue NSF61 G-372 arwick inc. he D Piping Group Over View... 1-1 SM 778 & 774 Suary of Specification... 2-1 Pipe... 2-2 90 Elbows...
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationBeam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
More informationTable of Contents. Douglas Barwick
100 7 00 arwick c. 3 17 56 Ø100 9 200 56 200 Y EQUIP. SUPPLIER 500 ERED SLUDGE DIGESION NK No.1 60 60 X 69 650 3 17 500 50 Ø100 651 152 CON. ON D-170 GROU RING 6 x 50 (YP.2) ERED SLUDG2 DIGESION NK No.2
More informationMaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
More informationCCTF LOOKING BACK AND BEYOND
CCTF LOOKING BACK AND BEYOND CCTF was incorporated in Canada in 1952 as Clyde Tube Forging, a manufacturer of butt weld fittings originally from Scotland. EMCO Limited purchased the company in 1954. The
More informationINTRODUCTION SAKETH EXIM
Certificates INTRODUCTION SAKETH EXIM is an Industrial Powerhouse with a dominant presence in Manufacturing and Fabrication of Metal Products used in Pipe Support Systems, HVAC Anti Vibration System and
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationPipe Fittings & Steel Nipples
November 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Pipe Fittings & Steel Nipples U I L D I N G C O N N E C T I O N S T H T L
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationMaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions
Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology NOW Includes MaxiFit Plus Easier to fit Reduces installation costs Pioneers in pipe solutions MaxiFit Overview A Versatile Solution
More informationPipe Support Systems & Components. EDITION 3.
Pipe Support Systems & Components 10 899 4 sales@anchoragegroup.com.au www.anchoragegroup.com.au ABOUT ANCHORAGE GROUP ABOUT ANCHORAGE Leading manufacturing company Swift Metal Services designs, manufactures
More informationGrooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 48 /1200 in a variety of straight and reducing styles. Most standard fittings are cast of durable
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationHot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The Style 177 QuickVic flexible coupling is installation-ready, and joins 2-8"/50-200 standard roll grooved and cut grooved steel pipe. The coupling's unique
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationPipe Hangers, Strut & Accessories
I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationCAST IRON FITTINGS STANDARD
060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
More informationThe applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
More informationSteel Conduits Conduit Fittings Flexible Conduits
Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;
More informationTHOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
More informationYogendra Enterprise.
+91-8048601603 Yogendra Enterprise https://www.indiamart.com/yogendraenterprise/pdf1.html Distributor, Suppliers and Traders of Galvanized Pipe fittings, Seamless MSL JSL pipe, Stainless Steel Pipe fittings,
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationFIG Gruvlok Flanges
Gruvlok Flanges The Gruvlok Fig. 7012 Flange allows direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The two interlocking halves of the 2" thru 12" sizes of the
More informationVictaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
More informationGrooved Piping Products
2 Grooved Piping Products Tyco Fire Products is ISO 9001 Certified with products manufactured in our newly constructed state of the art domestic ductile iron foundry and manufacturing facilities. We are
More informationDesign Stress = 8 Mpa
hdpe Pipes HdPE Pipes Muna Noor Manufacturing & Trading LLC is a pioneer in the manufacture of plastic pipe systems in Oman. Today s modern polyethylene resins are highly engineered for rigorous applications
More informationFIRE SPRINKLER EQUIPMENT SUBMITTAL
Fire Systems West, Inc. 206 FRONTAGE ROAD NORTH, SUITE C PACIFIC, WA 98047 (253) 833-1248 FIRE SPRINKLER EQUIPMENT SUBMITTAL FOR Being 4-20-21 VPAL MAINTENANCE SHED AND SUBSTATION FSW JOB NO. 02-11-11013
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationUtilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
More information