Advanced PE Single Wall Piping System
|
|
- Baldric Jackson
- 5 years ago
- Views:
Transcription
1 Advanced PE Single Wall Piping System 8
2 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply with FDA Code of Federal Regulators (CFR), Title 21, Chapter 1: Section determining suitability for contact with foodstuff. Pipe and fittings are certified to NSF 61-G. Dimensions and tolerances shall exceed ISO requirement. Fitting Production: Dimensions and tolerances shall exceed ISO requirement. Pressure Rating: Components shall be pressure rated in accordance with ASTM D2837 and DIN 8077 for hydrostatic design basis. Components shall be manufactured to standard dimensional ratio (SDR) 7 & 11. Based on continuous service life of 50 years at 68º F (20º C). SDR11: 150psi (PN10) PN = Nominal pressure in bar. Joining: Available methods shall be according to the schedule below DVS Socket: 1/2" (20mm) through 4" (110mm) DVS Contact Butt: 1" (32mm) through max product size 9
3 - Butt Fittings s PIPE 5 meter (16.4 ) lengths Dimensions SDR 11 / MOP 150 PSI mm inch OD s Weight (lbs/lth) Part Number / OD Pipe and fitting OD size is metric. Inch OD provided as nominal size only. PN10/150psi pressure rating. 10
4 - Butt Fittings EXTENDED EG 90 DEGREE EBOW Dimensions SDR 11 / PN 10 / 150 PSI mm inch 3 r z Weight (lbs) Part Number / * * *10 and 12 sizes are long spigot style. BUTT 45 DEGREE EBOW Dimensions SDR 11 / PN 10 / 150 PSI mm inch l3 z Weight (lbs) Part Number ½
5 - Butt Fittings EXTENDED EG BUTT TEE Dimensions SDR 11 / PN 10 / 150 PSI mm inch z 3 Weight (lbs) Part Number / , s z da(od) 3 MODED TEE* PRO150 Dimensions SDR 11 / PN 10 / 150 PSI mm inch 3 Z Weight (lbs) Part Number / *Short spigot.
6 - Butt Fittings REDUCING TEE* Dimensions SDR 11 / PN 10 / 150 PSI mm inch l z Weight (lbs) Part Number 63 x 50 2 x 1-1/ x 32 3 x 1* x 50 3 x 1-1/2* x 63 3 x x 32 4 x 1* x 50 4 x 1-1/2* x 63 4 x x 90 4 x x 63 6 x x 90 6 x x x x 63 8 x x 90 8 x x x x x x x x x x x x x x x x x x x * Fittings are short spigot style. 13
7 - Butt Fittings s SW NPT OD 2 1 MAE ADAPTER Dimensions SDR 11 / PN 10 / 150 PSI mm inch 1 2 SW NPT- Thread Weight (lbs) Part Number " / ½" " * *Note different part number for 3 machined version (rated 5 psi). Butt spigot end, can be used in socket fittings pages s OD NPT SW 1 2 FEMAE ADAPTER Dimensions SDR 11 / PN 10 / 150 PSI mm inch 2 SW NPT-Thread Weight (lbs) Part Number " / ½" " * *Note different part number for 3 machined version (rated 5 psi). Butt spigot end, can be used in socket fittings pages
8 - Butt Fittings EXTENDED EG END CAP Dimensions SDR 11 / PN 10 / 150 PSI mm inch l 3 Weight (lbs) Part Number 20 1/2* /4* / *1/2 and 3/4 require use of coupling as only socket fusion is available in these sizes. 15
9 - Butt Fittings s OD dm l2 b l l1 BUTT UNION-FKM Dimensions SDR 11 / PN 10 / 150 PSI mm inch s l l1 l2 dm b Weight (lbs) Part Number / EPDM unions available as special order. PVC/CPCV END l d TRANSITION UNION PVC/CPVC TO CHEM PROINE (ADVANCED PE) Dimensions mm inch l d Weight (lbs) SDR 11 / PN 10 / 150 PSI PVC Part Number CPVC Part Number 20 1/ * * 25 3/ * * / * 1/2 and 3/4 requires the use of socket fitting or coupling, butt fusion is not available for these sizes. 16
10 - Butt Fittings STUB END* (FANGE ADAPTER) Dimensions SDR 11 / PN 10 / 150 PSI mm inch d4 H1 Weight (lbs) Part Number / *Requires backing ring. See page 288. CHAMFERED STUB END* Dimensions SDR 11 / PN 10 / 150 PSI mm inch d4 l H1 Weight (lbs) Part Number *Requires backing ring. See page 288. Machined chamfer for Asahi butterfly valve use. Consult factory for other manufacturers. 17
11 - Butt Fittings EXTENDED EG CONCENTRIC REDUCER Description SDR 11 / PN 10 / 150 PSI mm inch l1 l2 l Weight (lbs) Part Number 25 x 20 3/4 x 1/2* x 20 1 x 1/2* x 25 1 x 3/4* x /2 x 3/4* x /2 x x 32 2 x x 50 2 x 1-1/ x 63 3 x x 63 4 x x 90 4 x x 90 6 x x x x x x x x x x x x x *s below 1 require use of socket coupling. See page
12 - Butt Fittings ECCENTRIC REDUCER Dimensions SDR 11 / PN 10 / 150 PSI mm inch 1 2 Weight (lbs) Part Number 25 x 20 3/4 x 1/2* x 25 1 x 3/4* x /2 x x 32 2 x x 50 2 x 1-1/ x 63 3 x x 63 4 x x 90 4 x x 90 6 x x x x x x x *s below 1 require use of socket coupling. See page
13 - Butt Fittings MACHINED FUSH REDUCER Dimensions SDR 11 / MOP 150 mm in 2 Part Number 90 x 63 3 x x 63 4 x x 90 4 x x 63 6 x x 90 6 x x x x 63 8 x x 90 8 x x x x x x x x x x x x x x x x x x x x x x x x x x x
14 - Butt Fittings 1 2 S D1 OD 120 RESTRAINT FITTING Dimensions SDR 11 / PN 10 / 150 PSI mm inch OD D1 S 1 2 Part Number 20 1/2* /4* / *s below 1 require use of socket coupling. See page
15 - Socket Fittings s PIPE 5 meter (16.4 ) lengths Dimensions SDR 7 / MOP 150 PSI Dimensions SDR 11 / MOP 150 PSI mm inch OD s Weight (lbs/lth) Part Number OD s OD Weight (lbs/lth) Part Number 20 1/ / / Pipe and fitting OD size is metric. Inch OD provided as nominal size only PN10/150psi pressure rating. 22
16 - Socket Fittings k t OD dsp 90 DEGREE EBOW Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch dsp k t Weight (lbs.) Part Number 20 1/ / / k t OD dsp 45 DEGREE EBOW Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch dsp k t Weight (lbs.) Part Number 20 1/ / /
17 - Socket Fittings k OD dsp t COUPING Dimensions SDR 7 / MOP PN 10 / 150 PSII mm inch dsp k t Weight (lbs.) Part Number 20 1/ / / t k OD dsp TEE k t Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch dsp k t Weight (lbs.) Part Number 20 1/ / /
18 - Socket Fittings REDUCING TEE Dimensions MOP 7 / PN 10 / 150 PSI mm inch dsp dsp1 t t1 l z Weight (lbs) Part Number 25 x 20 3/4 x 1/ x 20 1 x 1/ x 25 1 x 3/ x /2 x 1/ x /2 x 3/ x /2 x x 25 2 x 3/ x 32 2 x x 50 2 x 1-1/ t OD1 OD2 dsp CONCENTRIC REDUCER OD1 x OD2 Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch OD1 OD2 dsp t Weight (lbs) Part Number 25 x 20 3/4 x 1/ x 20 1 x 1/ x 25 1 x 3/ x /2 x x 32 2 x x 50 2 x 1-1/ x 63 3 x x 90 4 x OD1 male spigot. OD2 female socket. arge dimension is spigot end. Small dimension is socket. 25
19 - Socket Fittings k t d4 ODd3 STUB END* Shown with backing ring h Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch d3 d4 h k t Weight (lbs.) Part Number 20 1/ / / *Requires backing ring. See page 288 t OD dsp END CAP Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch t OD dps Weight (lbs) Part Number 20 1/ / /
20 - Socket Fittings d dsp OD t b UNION - FKM Dimensions SDR 7 / MOP PN 10 / 150 PSI mm inch d b dsp t Weight (lbs) Part Number 20 1/ / / FKM O-ring standard. EPDM unions available as special order. d dsp OD t b TRANSITION UNION - PVC/CPVC Dimensions SDR 7 / MOP PN 10 / 150 PSI PVC CPVC mm inch d b dsp t Weight (lbs) Part Number Part Number 20 1/ / / Discount Code Discount Code FKM O-ring standard. 27
21 - Socket Fittings s SW NPT OD 1 2 MAE ADAPTER Dimensions SDR 11 Molded MOP / 150 PSI mm inch OD s 1 2 NPT SW Weight (lbs) Part Number 20 1/ / / / / / Requires use of socket coupling on page 24. Butt fusion end, for socket welding use socket coupling. 1 OD NPT SW s FEMAE ADAPTER 2 Dimensions SDR 11 Molded MOP / 150 PSI mm inch OD s 1 2 NPT SW Weight (lbs) Part Number 20 1/ / / / / / Requires use of socket coupling on page 24. Butt fusion end, for socket welding use socket coupling. 28
22 - Fabricated Butt Fittings FABRICATED FUSH REDUCING TEE Dimensions SDR 11 / MOP 150 mm in Z Part Number 90 x 63 3 x x 63 4 x x 90 4 x x 63 6 x x 90 6 x x x x 63 8 x x 90 8 x x x x x x x x x x x x x x x x x x x x x x x x x x x
23 - Fabricated Butt Fittings 2 ATERAS 1 Dimensions MOP 5 PSI mm inch 1 2 Part Number ATERAS WITH 1/8 BEND Dimensions MOP 5 PSI mm inch 1 2 H Part Number
24 - Fabricated Butt Fittings z H P-TRAP Dimensions MOP 120 PSI mm inch Z H Part Number
25 - Valves t D1 d1 l PVC TYPE-21 BA VAVE - W/ CHEM PROINE SOCKET ENDS Dimensions EPDM O-RINGS FKM O-RINGS mm inch D1 d1 l Part Number Part Number 20 1/ / / For vented ball applications, use option code ($24.00 list). CPVC TYPE-21 BA VAVE - W/ CHEM PROINE SOCKET ENDS Dimensions EPDM O-RINGS FKM O-RINGS mm inch D1 d1 l Part Number Part Number 20 1/ / / For vented ball applications, use option code ($24.00 list). 32
26 - Valves PVC TYPE-21 BA VAVE - W/ CHEM PROINE BUTT ENDS Dimensions EPDM O-RINGS FKM O-RINGS mm inch D1 d1 l Part Number Part Number 20 1/ / / For vented ball applications, use option code ($24.00 list). CPVC TYPE-21 BA VAVE - W/ CHEM PROINE BUTT ENDS Dimensions EPDM O-RINGS FKM O-RINGS mm inch D1 d1 l Part Number Part Number 20 1/ / / For vented ball applications, use option code ($24.00 list). 33
27 - Valves H1 PVC TYPE-23 BA VAVE - W/ CHEM PROINE SOCKET ENDS Dimensions EPDM O-RINGS FKM O-RINGS PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l H1 Part Number Part Number 20 1/ / / Type-23 3-way ball valves are standard as pattern. For additional flow types, consult valve price book for proper option code and price. CPVC TYPE-23 BA VAVE - W/ CHEM PROINE SOCKET ENDS Dimensions EPDM O-RINGS FKM O-RINGS PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l H1 Part Number Part Number 20 1/ / / Type-23 3-way ball valves are standard as pattern. For additional flow types, consult valve price book for proper option code and price. 34
28 - Valves PVC TYPE-23 BA VAVE - W/ CHEM PROINE BUTT ENDS Dimensions EPDM O-RINGS FKM O-RINGS PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l H1 Part Number Part Number 20 1/ / / Type-23 3-way ball valves are standard as pattern. For additional flow types, consult valve price book for proper option code and price. CPVC TYPE-23 BA VAVE - W/ CHEM PROINE BUTT ENDS Dimensions EPDM O-RINGS FKM O-RINGS PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l H1 Part Number Part Number 20 1/ / / Type-23 3-way ball valves are standard as pattern. For additional flow types, consult valve price book for proper option code and price. 35
29 - Valves H PVC TYPE-14 DIAPHRAGM VAVE - W /CHEM PROINE SOCKET ENDS EPDM DIAPHRAGM PTFE DIAPHRAGM Dimensions PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l Part Number Part Number 20 1/ / / CPVC TYPE-14 DIAPHRAGM VAVE - W /CHEM PROINE SOCKET ENDS Dimensions EPDM DIAPHRAGM PTFE DIAPHRAGM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l Part Number Part Number 20 1/ / /
30 - Valves PVC TYPE-14 DIAPHRAGM VAVE - W /CHEM PROINE BUTT ENDS EPDM DIAPHRAGM PTFE DIAPHRAGM Dimensions PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l Part Number Part Number 20 1/ / / CPVC TYPE-14 DIAPHRAGM VAVE - W /CHEM PROINE BUTT ENDS Dimensions EPDM DIAPHRAGM PTFE DIAPHRAGM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l Part Number Part Number 20 1/ / /
31 - Valves PVC BA CHECK VAVE - W /CHEM PROINE SOCKET ENDS Dimensions EPDM FKM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l Part Number Part Number 20 1/ / / CPVC BA CHECK VAVE - W /CHEM PROINE SOCKET ENDS Dimensions EPDM FKM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l Part Number Part Number 20 1/ / /
32 - Valves PVC BA CHECK VAVE - W /CHEM PROINE BUTT ENDS Dimensions EPDM FKM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l Part Number Part Number 20 1/ / / CPVC BA CHECK VAVE - W /CHEM PROINE BUTT ENDS Dimensions EPDM FKM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l Part Number Part Number 20 1/ / /
33 - Valves PVC SEDIMENT STRAINER - W /CHEM PROINE SOCKET ENDS Dimensions EPDM FKM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 l Part Number Part Number 20 1/ / /
34 - Valves PVC SEDIMENT STRAINER - W /CHEM PROINE BUTT ENDS Dimensions EPDM FKM PN 10 / 150 PSI PN 10 / 150 PSI mm inch d1 t l Part Number Part Number 20 1/ / /
35 - Valves Compact! W P H PVC AD-16 DIAPHRAGM VAVE - W/ CHEM PROINE SOCKET ENDS Dimensions EPDM O-RINGS FKM O-RINGS PN 6 / 90 PSI PN 6 / 90 PSI H W P mm inch Part Number Part Number 20 1/ / / , PE socket ends. Normally closed. For butt valve, use part number above with 1 at end. 42
36 - Accessories EM-TECHNIK SERIES 3D DIAPHRAGM GAUGE GUARD* mm inch PTFE/EPDM Part Number 20mm Spigot PTFE/FKM Part Number 20 1/ *Gauge not included. Non-returnable and non-cancelable. CAIBRATION COUMN mm inch Description Clear PVC Tube, Socket FKM Part Number EPDM Part Number 20 1/2 3 GPH (100m) /2 6 GPH (200m) /4 16 GPH (500m) /4 32 GPH (1000m) GPH (2000m) GPH (4000m) Non-returnable and non-cancelable. TRUFO TK SERIES FOW METERS WITH CHEM PROINE BUTT ENDS Contact Asahi/ America for pricing and information. 43
37 - Accessories 2 2-1/2 GAUGE PP Body- Advanced PE End- PTFE Diaphragm Dimensions mm inch Dia 1 Range (psi) Part Number 20 1/2 2 1/2" /2 2 1/2" /2 2 1/2" GAUGE - BIG GAUGE PP Body- Advanced PE End-PTFE Diaphragm- Big Gauge Dimensions mm inch Dia 1 Range (psi) Part Number 20 1/ / /
38 - Accessories 2 2-1/2 PANE MOUNT GAUGE PP Body- Advanced PE End- PTFE Diaphragm- Panel Mount Dimensions mm inch Dia 1 Range (psi) Part Number 20 1/2 2-1/ /2 2-1/ /2 2-1/ DIGITA GAUGE WITH CHEM PROINE END CONNECTOR PP Body- Advanced PE End- PTFE Diaphragm- Digital Gauge Dimensions mm inch Dia 1 Range (psi) Part Number 20 1/ Polypropylene and PVDF bodies also available, contact Asahi/ America for information. 45
39 V86 Back Pressure/Relief Valves - Straight (Inline) - Accessories d h s da (OD) b V86 BACK PRESSURE REIEF VAVE STRAIGHT (ININE) - BUTT/IR ENDS Dimensions mm Inch da(od) d b h s 20 1/ Range (psi) EPDM Part Number SDR11 / PN 10 / 150 PSI PTFE/FKM Part Number / / Non-returnable and non-cancelable. d h b V86 BACK PRESSURE REIEF VAVE STRAIGHT (ININE) - SOCKET UNION Dimensions mm Inch da(od) d b h s 20 1/ Range (psi) EPDM Part Number SDR11 / PN 10 / 150 PSI PTFE/FKM Part Number / /
40 V86 Back Pressure/Relief Valves- Angle - Accessories d h 2 b 2 s V86 BACK PRESSURE REIEF VAVE ANGE - BUTT/IR ENDS Dimensions mm Inch da(od) d 2 b h s 20 1/ Range (psi) SDR11 / PN 10 / 150 PSI EPDM PTFE/FKM Part Number Part Number / da (OD) Non-returnable and non-cancelable. d h b 2 2 V86 BACK PRESSURE REIEF VAVE ANGE - SOCKET UNION Dimensions mm Inch da(od) d 2 b h s 20 1/ Range (psi) SDR11 / PN 10 / 150 PSI EPDM PTFE/FKM Part Number Part Number / Non-returnable and non-cancelable. 47
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationPigmented Polypropylene. Piping System
Pigmented Polypropylene Piping Sytem Photo courtey of Agape Water Solution Inc. 75 - Specification PP-Pure Pigmented Polypropylene (PP) High Purity Piping Sytem REV:HP0512PP Material: ASTM D4101 Group
More informationPPN Piping System. Cost Effective Purity
PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationCOOLSAFE Pre-Insulated PE Piping System
COOLSAFE Pre-Insulated PE Piping System Pipe Fittings Valves Installation COOLSAFE PE piping system provides a cost effective way for installing insulated piping for a broad range of industries. Pipe and
More informationPP-RCT Plumbing and HVAC Piping Systems
PP-RCT Plumbing and HVAC Piping Systems Pipe Fittings Valves 9-2016 Efficient Sustainable Green Technology Asahi/America, in partnership with Bänninger of Germany, introduces - Asahitec PP-RCT piping systems
More informationType 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
More informationDistributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationType Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
More informationType 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
More informationType Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
More information-Super Proline Chemical Grade PVDF
EFFECTIVE: 5/26/10 Indutrial Piping Sytem Dimenional Guide #SPDIM Super Proline -Super Proline 3 r z www.aahi-america.com Dimenion ubject to change without notice, conult Aahi/America Engineering Department
More informationMATERIALS. Polypropylene
68509.verB_1_3.P1.fh 4/17/07 12:15 PM Page 1 THERMOPLASTIC INDUSTRIAL PIPING SYSTEMS Asahi/America thermoplastic piping systems are designed for tough industrial applications. With our partner Agru of
More information3 way ball valve S4 hand operated
General: Symbolfoto Material: PVC-U / PP / PVDF Sealing material: EPDM / FPM Ball seating joint: PTFE Ball: T- oder L-Bohrung Dimensions: DN0 (DN5 / d6 / d/8 ) DN5 d0 d/ DN0 (DN5 / d5 / d/4 ) DN5 d d DN
More informationNSF/ANSI 61 Drinking Water System Components Health Effects
The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Thursday, January 08, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationPVC - Socket Ends (True Union Style Uses End Connector O-ring Seals)
Valves Socket/Threaded Style Pressure Rating @ 7 F ( C), Water " - " 5 psi " - " Flanged & Valves w/ptfe 50 psi s " 00 psi " 75 psi Maximum Service Temperature PVC = 0 F (0 C) CPVC = 00 F (9 C) PP = 0
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationType 21 Ball Valves. features PTFE
PDF Published August 22, 217 Type 21 Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking True Union
More informationType 567. Wafer Style Butterfly Valve
Wafer Style Butterfly Valve Type 5 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 stainless steel Operation:
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationLug Style Butterfly Valve Type 578
Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:
More informationR690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
More informationPraher S4 Ball Valve. manual valves. Praher Type S4 Ball Valve. Materials. Size. Pressure Rating. Features. Connections.
Praher S4 Ball Valve Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: s 16mm to 7mm - 10bar; s 90mm to 110mm
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationType 21 True Union Ball Valves
PDF Published June 27, 218 Type 21 True Union Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking
More informationType 147. Electrically Actuated Lug Butterfly Valve
GF Piping Systems Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM
More informationTKD Series 3-Way Automated Ball Valves Product Data Sheet. Body Material: PVC Size Range: 1/2" through 2"
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F1498 IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation.
More informationi butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
More informationINSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationManual Thermoplastic Valves Complete Specification Guide
Manual Thermoplastic Valves Complete Specification Guide Home Products Engineering Data New Products Contact Us July 2, 2005 Products by Category: Chemical Resistance Guide Guide Chlorine Gas Systems Gas
More informationintroduction VKD Series Automated Ball Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D4101 ASTM F1498 ASTM F437 ASTM F439 IPEX VKD Series Automated Ball Valves offer a variety of advanced features
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationFilters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS
Filters & Strainers Technical Information TECHNICAL INFORMATION WEIGHTS & DIMENSIONS Contact Spears for any Information not found. Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for
More informationMaterial Specification PVC valves shall meet ASTM D1784 cell classification 124 standards. CPVC valves shall meet ASTM D1784 cell classification 23447
Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
More information+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
More informationPRICE LIST WEFATHERM. 1 November PP-R Piping System WEFATHERM PIPE LEADERS IN PIPELINE TECHNOLOGY. Asmuss Plastic Systems Limited
143 PRICE LIST 1 November 2016 The Wefatherm PP-R System is ideally suited for use in a wide range of applications including hot and cold water systems, industrial heating and cooling, air-conditioning
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationType 730 Diaphragm Valves
PDF Published March 1, 2013 Type 7 Diaphragm Valves PVC CPVC PP PVDF pneumatically actuated SERIES: Type 7 SIZES: 1/2 4 ENDS: DIAPHRAGMS: True Union Socket, Threaded or ChemFlare TM1 Spigot 2 bodies with
More informationThermoplastic Valves and Piping Systems
Thermoplastic and Piping Systems Thermoplastic and Actuators Industrial, Environmental and Commercial Piping Systems High Purity Piping Systems Wet Process Solutions Equipment Introduction Plastics. Performance.
More informationPlain Ended Welding Fittings BS 4825 Part 2
Plain Ended Welding Fittings BS 4825 Part 2 Alchem offer a wide range of plain ended weld fittings to suit both hygienic and pharmaceutical applications. These include bends, tees, and reducers, both concentric
More informationCHEM-FEED. Engineered Skid Systems. ProSeries. by Blue-White Ind.
CHEM-FEED Engineered Skid Systems R Single pump model number CFS-1AA-AAAAAA Shown with Chem-Pro C2 pump, sold separately Dual pump model number CFS-2AA-AAAAAA Shown with Flex-Pro A3 pump, sold separately
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationThermoplastic Valves and Piping Systems
Thermoplastic and Piping Systems Thermoplastic and Actuators Industrial, Environmental and Commercial Piping Systems High Purity Piping Systems Wet Process Solutions Equipment 3 Year Warranty on & Actuators
More informationFitting Guide. Chemtrol Thermoplastic Flow Solutions. Chemtrol is a brand of
Fitting Guide Thermoplastic Flow Solutions is a brand of Contents Introduction 2 Introduction to Fittings 2 Materials 2 Fitting Terms and Abbreviations 3 Dimensions and Standards 3 Product Guide 4 PVC
More informationType 145. Electrically Actuated Wafer Butterfly Valve
Electrically Actuated Wafer Butterfly Valve Type 1 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
More informationCORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS OFFERING YOU ADVANCED TECHNOLOGY, HIGH STANDARD OF QUALITY AND THE GUARANTEE OF A LEADING MANUFACTURER FOR A CUSTOM DESIGNED SOLUTION TO YOUR CORROSIVE
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationModular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
More informationPipe Nipples / Solvent Cement / Pipe Clips 11. Diaphragm Valves / Knife Gate Valves 21
TABLE OF CONTENTS Pipe Sizing 1 Pipe 2 Tee s 3 Elbows 4 Couplings 5 Adaptors, Caps & Plugs 6 Unions 7 Reducer Bushing 8 Wye s / Clamp on Saddles 9 Flanges 10 Pipe Nipples / Solvent Cement / Pipe Clips
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationDiaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.800.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled
More informationSDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationDatasheet Pressure Reducing Valves V782/V82/V182
Datasheet Pressure Reducing Valves V78/V8/V8 Advantages - No auxiliary energy is required to operate the valve - Small standard tolerances due to the large control surface and the spiral spring - Can also
More informationGEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
More informationintroduction RV Series Sediment Strainers Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D4101-86 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F1498 ASTM F437 IPEX RV Sediment Strainers protect critical pipeline components by
More informationASAHIPUR. High Purity Piping Systems. Purad PolyPure PP-Pure Purflon Frank Regulators SP Series Welding Equipment
ASAHIPUR High Purity Piping Systems Purad PolyPure PP-Pure Purflon Frank Regulators SP Series Welding Equipment High Purity and Wet Process Solutions Asahi/America offers the most advanced high purity
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationRotameters. Variable Area Flow Meters
Variable Area Flow Meters Rotameters General Size: ⅜ 2½ Total Flow Range:. 264 gpm Tube Material: PA, PSU, PVC transparent Seal: EPDM, FPM Float: PVDF, PVDF-HP transparent En Connection: Solvent cement
More informationABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
More informationpvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve
pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All
More informationK-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
More informationGeorge Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
More informationTrue Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support
Sekisui Industrial Piping Co., Ltd. located in the Chungkang Export Processing Zone of Taichung City in Taiwan. From March of 2006, Sekisui Industrial Piping Co., Ltd. was established as a wholly-owned
More information600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
More informationFK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationDiaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. The valve has an integrated optical
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationPOLYETHYLENE PIPE SYSTEMS AS/NZS 4129, AS/NZS 4130 Potable water, non-potable water, sewer, gas and conduit applications
POLYETHYLENE PIPE SYSTEMS AS/NZS 4129, AS/NZS 4130 Potable water, non-potable water, sewer, gas and conduit applications JAN 2017 1 CONTENTS PRESSURE PIPE 3 ELECTROFUSION FITTINGS 8 SPIGOT FITTINGS 18
More informationCEPEX PLASTIC VALVES EXTREME SERIES
CEPEX PLASTIC VALVES EXTREME SERIES Technical Product Presentation Cepex presentation Cepexis one of the leading European (Spanish) manufacturers of plastic valves and fittings. For more than 30 years
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More informationpolypropylene section guide application guide standards and approvals
polypropylene Polypropylene (PP) piping systems are widely used in industrial processing. Light in weight yet with high impact strength and reliable heat fusi welding, PP also offers good abrasi resistance
More informationType 561/562 Cone Check Valve
Type 561/562 Cone Check Valve Standard Features Size 3/8 4 Material Body: PVC, CPVC, PROGEF Standard, Polypropylene, SYGEF PVDF, ABS Spring (562 only): Stainless Steel Optional: Nimonic C/Hastelloy C,
More informationTechnical Data. Flow Meter Schwertberg, Poneggenstr. 5 Austria/Europe Fax +43/7262/ Tel.
Technical Data. Flow Meter. Tel. +43/7262/61179-0 4311 Schwertberg, Poneggenstr. 5 Austria/Europe info@praher-valves.com Fax +43/7262/61203 Float-type flow meter Float-type flow meter DN Inches da Measuring
More informationFlowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ 2/2-way diaphragm valve has a low maintenance piston actuator which can be controlled by inert gases. Normally Closed, Normally Open and Double Acting control
More informationFactory address: Mola sadra st., Abooreyhan st Eshtehard Industrial Town, TEHRAN/ IRAN
z d Le mm equiv inch Le r 1) z z Le L 110 5 2 5 5 8 2 Elbow d 1 51/2 210 2 1 6 2 0 7 2 272 8 0 0 5 9 8 291 2 10 375 0 0 11 3 73 78 355 1 5 93 0 511 675 531 0 7 1 0 8 625 6 25 95 653 710 1065 686 1 7 900
More informationSpears Low-Extractable SCHEDULE 80 PIPE
Spears Low-Extractable SCHEDULE 80 PIPE NOMINAL PIPE MAX. W.P. LGTHS/ PART NUMBER AVG. OD AVG. ID MIN. WALL LBS/FT SIZE PSI* CARTONS 1/2" LXT-005.840.528.147 420.202 22 3/4" LXT-007 1.050.724.154 340.273
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationElectric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe
Electric Actuated 3-Way Ball Valves L-Port, PVC Body, Teflon/EPDM Seals 1/2 to 2 inch Pipe SERIES Features Industrial grade PVC ball valve with PTFE/EPDM seals IP67 weatherproof polyamide enclosure with
More informationBondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements
Bondstrand 2000M/7000M for marine 1 to 6 inch (Quick-lock joint), 8 to 40 inch (Taper/Taper joint) with external pressure requirements Uses and applications Ballast Portable discharge line Chlorination
More informationDK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
More informationFK DN PVC-U. Butterfly valve
FK DN 40 400 PVC-U Butterfly valve FK DN 40 400 BUTTERFLY VALVE Interchangeable disk in PVC-U with through shaft, available in different thermoplastic materials: PP-H, PVC-C, ABS, PVDF Overall dimensions
More information