Piston Accumulators Series Catalog /USA Page
|
|
- Ada Chambers
- 5 years ago
- Views:
Transcription
1 atalog /US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Six Standard Seal Options to Handle a Variety of Fluids & Temperatures SME ertification vailable 38 Parker Hannifin orporation ccumulator ivision
2 atalog /US Page Specifications Materials Shell high strength alloy steel (7" and 9" bores comply with SME material specifications as standard) aps steel (7" and 9" bores comply with SME material specifications as standard) Pistons aluminum (4" thru 7"), ductile iron (9") artridge stainless steel Protector steel Piston Glide Rings PTFE Piston & End Seals various polymers Piston Seal ackups PTFE Piston ccumulators Series 5000 Series 5000 accumulators and gas bottles with 2 through 6 bores are supplied with a high pressure cored gas valve as standard. Models with 7 and 9 bores are supplied with a heavy duty (military) poppet-type gas valve cartridge (Mil. Spec. MS ) as standard. with ore (2-6 ores) Military Style (MS) (7-9 ores) ctual ore Sizes & Maximum Flow Rates Nominal ctual ore Size Max. Recommended Flow* ore Size (in.) (in.) (mm) GPM LPM *Note: ased on 120 in/sec maximum piston speed, port & fitting size will become limiting factors for most applications. Pressure Ratings Series 5000 piston accumulators are rated at minimum 4 to 1 design factors. For pressures over 5000 psi, consult the factory. Fluids Parker s piston accumulators are compatible with a wide variety of fluids. Standard accumulators (with nitrile seals) may be used with petroleum-based industrial oils or water-based flame resistant fluids. Optional seals compatible with most industrial fluids are available with temperature ranges from -65 F to 400 F (-53 to 204 ). Precharge Units are shipped with a 25 psi nitrogen precharge as standard. For other precharge pressures, specify at the time of order. Standard s The following ports are supplied as standard on all fluid ends and on the gas end of accumulators ordered for use with gas bottles: Standard s ore Metric Models Size Standard Models SPP (in) 2 SE #12 3/4 3 SE #12 3/4 4 SE # SE # ode 62 Flange 2 Metric ode 62 Flange 9 2 ode 62 Flange 2 Metric ode 62 Flange ertification #5 SE Thread Parker offers SME (Section VIII, iv. 1) ertification as a standard option on piston accumulators and auxiliary gas bottles as follows: ore SME ertification Size Req'd. vailable 2" no no 3" no no 4" no no 6 no option 7 yes option 9 yes option Special Options If your application requires a piston accumulator, gas bottle, or special option that falls outside of Parker s broad offering, consult your local distributor, Parker representative, or the factory with your specific requirements. Parker has the manufacturing and engineering expertise to design and build piston accumulators to your exacting requirements, from simple modifications of standard units to complete designs. Some example of Parker s past special designs include: Special and Stainless Steel Materials Piston Position and Velocity Sensors and Switches Special Seals Non-Standard apacities 1/2-20 UNF-2 uxiliary Gas ottles When space does not permit the installation of the required piston accumulator, a smaller accumulator may be used by connecting it to an auxiliary gas bottle(s) that can be located in a nearby spot where space is available. In some cases, a piston accumulator and gas bottle combination may be more economical, especially large capacity sizes. Piston travel, confined to the accumulator, must be calculated with ample margins to store the required fluid. 39 Parker Hannifin orporation ccumulator ivision
3 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 5000 PSI Piston ccumulators for Oil and Water Service Threaded ored Flanged Model No. 1 Fluid Gas - Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 2N00051K N00 101K N00151K / / N00291K 1 Pint N00581K 1 Quart N00291K 1 Pint N00581K 1 Quart N00901K 1.5 Liter / /4 3/ N01 161K 1/2 Gal N0 1831K 3 Liter N00581K 1 Quart N01 161K 1/2 Gal N02311K 1 Gal / / N03471K 1-1/2 Gal N05781K 2-1/2 Gal N02311K 1 Gal N03471K 1-1/2 Gal N05781K 2-1/2 Gal N09241K 4 Gal / / N1 1551K 5 Gal N17331K 7-1/2 Gal N23 101K 10 Gal Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 40 Parker Hannifin orporation ccumulator ivision
4 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 5000 PSI Piston ccumulators for Use with Gas ottles Gas Threaded Flanged Fluid Gas (oth Ends) ccumulator Volume Volume S Tube E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00583KTETE 1 Quart N01 163KTETE 1/2 Gal N02313KTETE 1 Gal / / N03473KTETE 1-1/2 Gal N05783KTETE 2-1/2 Gal N02313KTETE 1 Gal N03473KTETE 1-1/2 Gal N05783KTETE 2-1/2 Gal N09243KTETE 4 Gal / / N1 1553KTETE 5 Gal N17333KTETE 7-1/2 Gal N23103KTETE 10 Gal PSI uxiliary Gas ottles ored Threaded Flanged Model No. 1 Gas Volume Gas Nominal ctual S Tube E F G Weight ottle (gal) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00581K 1 Quart N01161K 1/2 Gal N02311K 1 Gal / / N03471K 1-1/2 Gal N05781K 2-1/2 Gal N02311K 1 Gal N03471K 1-1/2 Gal N05781K 2-1/2 Gal N09421K 4 Gal / / N11551K 5 Gal N17331K 7-1/2 Gal N23101K 10 Gal Parker Hannifin orporation ccumulator ivision
5 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 345 ar Metric Piston ccumulators for Oil and Water Service Threaded ored Flanged Model No. 1 Fluid - Gas Volume Oil Volume SPP/G SE E F G Weight Service (Liters) (cu in) (Liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 2N00052K N00 102K N00152K / N00292K N00582K N00292K N00582K N00902K /4 M N01 162K N01832K N00582K N01 162K N02312K M N03472K N05782K N02312K N03472K N05782K N09242K M N1 1552K N1 7332K N23 102K Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 42 Parker Hannifin orporation ccumulator ivision
6 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 345 ar Metric Piston ccumulators for Use with Gas ottles Gas Threaded Flanged Fluid - Gas ccumulator Volume Volume SPP/G SE E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582KRR N01 162KRR N02312KRR M N03472KRR N05782KRR N02312KRR N03472KRR N05782KRR N09242KRR M N1 1552KRR N 17332KRR N23 102KRR ar Metric uxiliary Gas ottles ored Threaded Flanged Model No. Gas Volume - Gas Nominal ctual SPP/G SE E F G Weight ottle (liters) (liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582K N01 162K N02312K M N03472K N05782K N02312K N03472K N05782K N09242K M N1 1552K N 17332K N23 102K Parker Hannifin orporation ccumulator ivision
7 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 5000 PSI Piston ccumulators for Oil and Water Service MS Flanged Fluid Gas Volume Volume E F G Weight Model No. 1 (gal) (cu in) (cu in) (in) (in) (in) (in) (in) (in) (lbs) 7K1 1551K 5 Gal K17331K 7-1/2 Gal " SE ode K23101K 10 Gal ± Flange 2 5/ K34651K 15 Gal K23101K 10 Gal K34651K 15 Gal K46201K 20 Gal " SE ode 62 3/ K57751K 25 Gal ± Flange K69301K 30 Gal The Minimum esign Metal Temperature (MMT) for SME certified piston accumulators presented in this section is 20 F (-7 ). Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 44 Parker Hannifin orporation ccumulator ivision
8 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 5000 PSI Piston ccumulators for Use with Gas ottles Flanged Fluid Gas ccumulator Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) s (in) (in) (in) (lbs) 7K11553KPQPQ 5 Gal K17333KPQPQ 7-1/2 Gal K23103KPQPQ 10 Gal ± SE ode 62 5/ K34653KPQPQ 15 Gal K23103KPQPQ 10 Gal K34653KPQPQ 15 Gal K46203KPQPQ 20 Gal SE ode 62 3/ K57753KPQPQ 25 Gal ± K69303KPQPQ 30 Gal PSI uxiliary Gas ottles MS Flanged Model No. 1 Gas Volume Gas Nominal ctual E F G Weight ottle (gal) (cu in) (in) (in) (in) s (in) (in) (in) (lbs) 7K11551K 5 Gal K17331K 7-1/2 Gal K23101K 10 Gal ± SE ode 62 5/ K34651K 15 Gal K23101K 10 Gal K34651K 15 Gal K46201K 20 Gal SE ode 62 3/ K57751K 25 Gal ± K69301K 30 Gal Parker Hannifin orporation ccumulator ivision
9 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 345 ar Metric Piston ccumulators for Oil and Water Service MS Flanged Fluid Gas Volume Volume E F G Weight Model No. 1 (Liters) (cu in) (liters) (mm) (mm) (mm) (mm) (mm) (mm) (kg) 7K1 1552K K17332K " Metric 233 7K23102K ± SE ode 62 Flange 2 M K34652K K23 102K K34652K Metric 359 9K46202K SE ode 62 M K57752K ± Flange K69302K Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 46 Parker Hannifin orporation ccumulator ivision
10 atalog /US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 345 ar Metric Piston ccumulators for Use with Gas ottles Flanged Fluid Gas ccumulator Volume Volume E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) s (mm) (mm) (mm) (kg) 7K11552KMQMQ K17332KMQMQ Metric 223 7K23102KMQMQ ± SE ode 62 Flange 2 M K34652KMQMQ K23102KMQMQ K34652KMQMQ Metric 359 9K46202KMQMQ SE ode 62 M K57752KMQMQ ± Flange K69302KMQMQ ar Metric uxiliary Gas ottles MS Flanged Model No. 1 Gas Volume Gas Nominal ctual E F G Weight ottle (Liters) (Liters) (mm) (mm) (mm) s (mm) (mm) (mm) (kg) 7K11552K K17332K Metric 219 7K23102K ± SE ode 62 Flange 2 M K34652K K23102K K34652K Metric 336 9K46202K SE ode 62 M K57752K ± Flange K69302K Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 47 Parker Hannifin orporation ccumulator ivision
11 atalog /US Page Options Piston ccumulators Series 5000 Optional s The following ports are available as options on all piston accumulators. SE Straight Thd. ode 62 Flange NPT SPP ISO Min. ode Min. Min. Min. Min. Size ode ore Size Inch Metric ore Size ode ore Size ode ore Size ode ore #5 T 2" 1" PG MG 4" 3/8" UT 2" 3/8" R 2" M14 Y 2" #6 T 2" 1¼" PH MH 4" 1/2" UU 2" 1/2" R 2" M18 Y 2" #8 T 2" 1½" PP MV 6" 3/4" UV 2" 3/4" R 2" M22 Y 2" #10 TI 2" 2" PQ MQ 6" 1" UW 3" 1" R 3" M27 Y 2" #12 T 2" 2½" PR 7" 1¼" UX 3" 1¼" RE 3" M33 YE 3" #16 TE 3" 3 PS 9 1½" UY 4" 1½" RF 4" M42 YF 3" 2 UZ 4 2 RG 4 Notes: 1) 1" thru 2" flanges are to standard SE ode 62 dimensions, 2-1/2" to Socket Weld Flange dapter Pattern, dimensions are shown below. Metric pattern supplied on 345 ar Metric units unless otherwise specified. 2) SPT and Metric ports available, consult factory. SE 4-olt Flange imensions ode 62 (ISO 6162) (thru 2" diameter) 6000 PSI (410 ar) Flange Size SE Flange imensions (in.) Metric SE Flange imensions (mm) in mm F G F G 1½" 38 5/ ½ M " 50 3/ M ½" 7/ ½ F (4 places) x G Min. epth Optional Military Style (M) 2 thru 6 ore Sizes heavy duty (military style) poppet-type gas valve cartridge (Mil. Spec. MS ) is available as an option (M) specify when ordering. Note: This valve is standard on 7 and 9 bore sizes. Military Style (MS) 1/2-20 UNF-2 Safety Fuse Options (F) Safety Fuses are used as a safety device on accumulators and gas bottles to prevent over-pressurization of gas due to external heat or hydraulic pressure (set at 140% of maximum system pressure to avoid rupture disk fatigue and premature failure). The rupture disks are calibrated to rupture at a pre-determined pressure. Safety fuses are available on most sizes of piston accumulators. Safety fuses can be installed on all piston accumulators by using a fuse adapter. 4" bore units and above can be equipped with a fuse port machined in the gas cap by specifying the Safety Fuse Option (F) at the time of order in the model code, see How to Order. The safety fuse assembly and/or fuse adapter must be ordered separately. escription Part Number Safety Fuse ssembly xxxx Replacement Rupture isks xxxx Fuse dapter ) ssembly includes housing and rupture disk, xxxx = pressure setting in 100 psi increments, i.e., for an assembly with a 2000 PSI setting, order P/N Fuse Fuse dapter #8 SE Straight Thread #5 SE Straight Thread #5 SE Straight Thread 48 Parker Hannifin orporation ccumulator ivision
12 atalog /US Page Options & Parts Piston ccumulators Series 5000 Water Service Option (W) Piston accumulators are available for use with water as the fluid media. Modifications include electroless nickel plating all surfaces and metal parts. arboxilated Nitrile (J) piston seals should be specified for water service. onsult factory for details. Seal Material **Recommended Maximum Seal Operating Temperature with General pplication ode Polymer Temperature Range Reduced Life and ompatibility* K una -20 F to 165 F 200 F Parker's Standard ompound ompatible Nitrile -29 to with most mineral oil-based fluids E Fluorocarbon -10 F to 250 F 400 F ompatible with most mineral oil-based fluids at Elastomer -23 to higher temperatures and some exotic fluids Ethylene -40 F to 250 F 300 F ompatible with most phosphate ester fluids Propylene -40 to and some synthetic fluids H Hydrogenated -45 F to 325 F 350 F ompatible with most oil-based and biodegradable fluids, Nitrile -43 to maintains sealing effectiveness at low temperatures J arboxilated -20 F to 165 F 200 F ompatible with most mineral oil-based fluids Nitrile -29 to with added internal lubricity for water based fluids Q Low Temp. -45 F to 160 F 200 F ompatible with most mineral oil-based fluids and Nitrile -43 to maintains sealing effectiveness at low temperatures * Note: onsult local distributor or factory for fluid compatibility information. Temperature ranges may vary depending upon fluid used in hydraulic system. ** The temperature listed indicates the operating temperature range of the seals, not the accumulator. For the Minimum esign Metal Temperature (MMT) of SME certified accumulators, refer to page 44. Parts List ccumulators Item Part escription 1 ody 2 ap 3 Gas ap 4 Piston 5 V-O-Ring 5 V-O-Ring ack-up Washers 6 PTFE Ring (Piston) 7 O-Ring 7 O-Ring ack-up Washer 8 8 O-Ring 9 Guard 9 Screw PSI Seal Kit Numbers (Includes items 5, 5, 6, 7, 7, 8) Material ore Size 2" 3 4" 6" 7" 9" una-nitrile (Std.) RK0200K000 RK0300K000 RK0400K000 RK0600K000 RK0700K000 RK0900K000 Fluorocarbon RK0200E000 RK0300E000 RK0400E000 RK0600E000 RK0700E000 RK0900E000 EPR RK RK RK RK RK RK Hydrogenated Nitrile RK0200H000 RK0300H000 RK0400H000 RK0600H000 RK0700H000 onsult Factory arboxylated Nitrile RK0200J000 RK0300J000 RK0400J000 RK0600J000 RK0700J000 RK0900J000 Low Temp Nitrile RK0200Q000 RK0300Q000 RK0400Q000 RK0600Q000 RK0700Q000 RK0900Q Parker Hannifin orporation ccumulator ivision
13 atalog /US Piston ccumulators Page Ordering Information Series 5000 How to Order Series 5000 Piston ccumulators Piston accumulators and gas bottles can be specified by using the symbols in the chart below to develop a model number. Select only those symbols that represent the features desired, and place them in the sequence indicated by the example at the top of the chart. Nominal ore Type of esign esign Seal Hyd. Gas Series Size onstruction Options apacity Pressure Number ompound Modification Modification 7 K K Series ccumulator Gas ottle Nominal ore Size 2 2 inches 3 3 inches 4 4 inches 6 6 inches 7 7 inches 9 9 inches N K L Type of onstruction Threaded both ends non-sme mat l standard on 2, 3, 4, 6 Threaded both ends.s.m.e. mat l standard on 7 & up Same as K with.s.m.e. approval stamp 7 & up. vailable as special on smaller sizes Options lank Standard Gas ap W Water Service F SE Fuse * G SE Fuse * Water Service M MS L MS Water Service P Fuse and MS Valve R Fuse and MS Valve Water Service * Safety fuse assembly not included. Order fuse assembly separately. ore Size/apacity cu. in cu. in cu. in cu. in cu. in cu. in cu. in cu. in cu. in cu. in cu. in cu. in gal ½ gal ½ gal gal ½ gal ½ gal gal gal ½ gal gal gal ½ gal gal gal gal gal gal gal gal. onsult factory for other available sizes. esign Pressure 5000 PSI esign Number 1 Standard s* 2 Metric Mounting Holes & Hyd. (SPP/Metric Flange Standard*) Specify Special s 3 Special (Hyd. or Gas, See Table) ### Special esign and Gas Modifications esignated by 2 igits 1st 2nd Min. igit Style igit escription ore Size lank Std. lank Std. Straight Thread s T SE SE #5 (1/2-20) 2 SE #6 (9/16-18) 2 SE #8 (3/4-16) 2 SE #12 (1 1/16-12) 2 E SE #16 (1 5/16-12) 3 F SE #20 (1 5/8-12) 3 G SE #24 (1 7/8-12) 4 H SE #32 (2 1/2-12) 7 I SE #10 (7/8-14) PSI (ode 62) Min. ore P Flange G 1 4 H 1 1/4 4 P 1 1/2 6 M Metric Q 2 6 Flange R* 2 1/2 7 per S* 3 9 ISO 6162 T 3/8 2 U NPTF U 1/2 2 (Not V 3/4 2 Recommended) W 1 2 X 1 1/4 2 Y 1 1/2 4 Z 2 4 SPP/SPT Metric/ISO R SPP 3/8-19 M14 x 1.5 Parallel 1/2-14 M18 x 1.5 SPT 3/4-14 M22 x 1.5 Taper 1-11 M27 x 2 G Metric E 1 1/4-11 E M33 x 2 Y ISO F 1 1/2-11 F M42 x G 2-11 G M48 x 2 Example of Special ccumulator 4 N K T U V Non-std. *Standard s vailable (See Modifications Table if Using Other Than Standard s Shown elow) ore Standard Metric (SPP) Size s s 2 SE #12 3/4 3 SE #12 3/4 4 SE # SE # ode 62 Flange 2 ode 62 Flange 9 2 ode 62 Flange 2 ode 62 Flange * For socket weld flange. Not available with metric flange. SE #8 Hyd. Seal ompound (See atalog for Temperature Settings) K una Nitrile (Std) E Fluoroelastomer EPR H Hydrogenated Nitrile J HWF Q S NPT 3/4 Gas Low Temp. Special (to be specified) 50 Parker Hannifin orporation ccumulator ivision
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More informationBladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle
LADDER PRODUCTS za03 ottom Repairable Top Repairable Medium Flow High Flow Transfer arrier Gas ottle Features: Operating Pressures to 6600 PSI Ten Different Capacities from 10 cu in to 15 gallons Nine
More informationPiston Accumulators. Threaded Piston Accumulators ACP Crimped Piston Gas Bottles Metric Accumulators & Bottles. Piston Accumulators.
Overview Introduction Threaded ACP Crimped Piston Gas ottles Metric Accumulators & ottles Piston 5000 4000 3000 3000 2000 IN THIS SECTION Series 2000 & 3000 29 ACP 37 Series 4000 & 5000 43 Features: Heavy
More informationA Series Piston Accumulators. 0.5 to 300 Litres, 250 and 350 bar
Series Piston ccumulators 0.5 to 300 Litres, 250 and 350 bar Description Piston ccumulators up to 80 Litres volume, 200 ore, 250 ar & 350 ar.parker series piston accumulators offer quality design and premium
More informationBladder Accumulators. Bladder Accumulators Introduction. Bladder IN THIS SECTION. Features. Models, Capacities & Dimensions. 10 cu in to 15 gallons
Overview ntroduction N TS SECTON Overview 51 Specifications 52, Capacities & Dimensions Bottom Repairable 54 Top Repairable 55 igh-flow 56 Transfer Barrier 57 Bottles 58 Options & Accessories 59 Replacement
More informationPiston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
More informationDiaphragm Accumulators AD Series
Parker Diaphragm Accumulators Feature: Operating Pressures to 250 Bar Capacities from.075 to 2.80 Liters Compact and Lightweight Low Cost, Non-Repairable Design Nitrile & Hydrin Diaphragms Durable Metric
More informationPiston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
More informationInline Pulse-Tone. Hydraulic Shock Suppressors. Inline Pulse-Tone Shock Suppressors Feature:
Shock Suppressors Feature: Three Bladder Polymers for a Wide Range of Fluids and Temperatures NPT, BSPP, SAE or Split Flange Connections Mounting in Any Position 3000 PSI Models for Water/Chemical Service
More informationA Series Piston Accumulators 250 & 350 bar accumulators with fluid volumes from 0.1 litres to 76 litres
Piston Accumulators & 350 bar accumulators with fluid volumes from 0. litres to 76 litres Catalogue HY07-240/UK October 2004 Catalogue HY07-240/UK Introduction Contents Page Accumulator Selection 2 Certification
More informationTable of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
More informationEHP Series Piston Accumulators. 0.1 to 1000 Litres, up to 350 bar (as standard)
EHP Series Piston ccumulators 0.1 to 1000 Litres, up to 350 bar (as standard) Description The EHP piston accumulators are manufactured in arbon & Stainless Steel and are available with a wide range of
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationLOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationOil and Gas - O&G Series Bladder Accumulators
Oil and Gas - O&G Series ladder ccumulators High Pressure, 07 to 760 bar Catalogue HY0-4004/UK rev. 0 escription esigned for high pressure hydraulic systems, the O&G bladder accumulator has been developed
More informationQuick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power and inst
Instrumentation Quick ouplings 1 Parker Hannifin orporation Quick oupling Products Introduction The Parker Hannifin offers a full range of precision quick action couplings for use in the process, power
More informationThermoplastic Couplings
Thermoplastic ouplings Thermoplastics -1 Quick oupling Division Thermoplastic ouplings Table of ontents Thermoplastics oupling Selection Guide...-3 Spectrum Series...-4 Specifications...-4 ouplers...-5
More information7" & 8" Bore High Pressure zhc03 Hydraulic Cylinders Series 3H
7" & " ore High Pressure zhc0 Hydraulic ylinders Series H Heavy Duty Service Industrial Tie-od onstruction Nominal Pressure 000 PSI Fifteen Standard Mounting Styles For ylinder Division Plant Locations
More informationSV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
More informationBV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationPiston Accumulators. SK Series 28 INNOVATIVE FLUID POWER. Piston Accumulators. Piston Types. Description. Construction.
SK Series Piston Accumulators Piston Types TYPE 2 Without heck Valves Application (without heck Valve) Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number
More informationSeries VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationMODEL NUMBERS UPDATED. Accumulator. The pressure is always on.
NUMERS UPDTED ccumulator The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 EconoLator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
More informationLow Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
More informationAccumulator. The pressure is always on.
ccumulator The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 Econolator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI MWP pplications
More informationA c c u m u l at o r. The pressure is always on.
c c u m u l at o r The pressure is always on. www.tobul.com Table of Contents Piston ccumulators 7 Econolator 8 3,000 PSI Series 9 5,000 PSI Series 12 10,000 PSI Series 14 Greater than 10,000 PSI MWP
More informationFLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More informationMounting Components. Accumulator Catalog. Mounting Components. HS - Regular Duty Clamp. Function. HSS - Heavy Duty Clamp. Types. KBK - Base Bracket
Mounting omponents Mounting omponents Y mounting components are used to mount all types of hydropneumatic accumulators safely and simply, regardless of the mounting position. Our wide range includes suitable
More informationMEDIUM PRESSURE FILTERS
Medium Pressure Filters 61-2999 psi Low-cost aluminum construction inline filters, provide flexibility for use in both mobile and industrial applications. Durable and light weight, these filters are ideal
More informationGold Cup Hydrostatic Transmission
Gold Cup Hydrostatic Transmission The Gold Cup Hydrostatic Transmission pumps are variable displacement piston pumps of an unparalleled rugged design. Rated to 5000 PSI continuous pressure and continuous
More informationLOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More informationHIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm
HIGH PRESSURE FILTERS DFFX Series Reverse Flow Differential Pressure Optimized Filters 6090 psi up to 160 gpm Hydraulic Symbol or DFFX FILTER REVERSE FLOW CIRCUIT P Indicator Reverse Flow Valve BY-PASS
More informationDuplex Pressure Filters
Duplex Pressure Filters Series DFDK Ball Valve Selector Pressures to 45 psi Flows to 9 gpm APPLICATIONS HYDAC DFDK Duplex Filters are ideal for use on hydraulic test equipment, robots, or other critical
More informationatalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
More informationHusky 1050 Plastic Pumps Air-Operated Double Diaphragm
PRT NO. ONFIGURTION NO. SERIL NO. TE OE SERIES MX WPR PSI-bar ME IN Husky 15 Plastic Pumps ir-operated ouble iaphragm Husky 15 Selector Tool To order a Husky 15, use the online selector tool at www.graco.com/process
More informationFlow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
More informationMedium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
More informationRotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationHIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm
HIGH PRESSURE FILTERS DF/DFF 1500 Series Inline Filters 6090 psi up to 250 gpm Hydraulic Symbol DFF FILTER REVERSE FLOW CIRCUIT Bypass Valve Filter Element Pop-up Indicator Features Available in T ported
More information08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
More informationHIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
More informationKLINGER KVN. Piston valves DN (1/2" 8")
KINGER Piston valves 15 200 (1/2" 8") www.klinger.kfc.at KINGER The original, tried and tested a million times over PROUCT VNTGES» ow maintenance» Relialy tight in the ore and to atmosphere in accordance
More informationPressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
More informationProcess Equipment Catalog Pumping Solutions for Process Industries
Process Equipment atalog Pumping Solutions for Process Industries Table of ontents Process Equipment uyer s Guide ontents New Products... 2 Pump Model Overviews... 3 Pump Selection Key for ODD Pumps...
More informationSV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves
SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally
More informationquick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
More informationColorflow and Ball Valves. Industrial Flow Control, Check, Gauge Control. Catalog HY /US
Colorflow and Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Fully guided poppets are used on Colorflow valves rather than the less durable ball-check type construction.
More informationF20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
More informationNFH Low Pressure Filters
PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,
More informationHydraulic. Quick Couplings
Hydraulic Quick ouplings -1 Introduction ouble Shut-Off and Straight-Thru ouplings Parker hydraulic couplings have a wide variety of designs, each tailored to a particular application or use. This catalog
More informationFisher Control-Disk Valve NPS 14-24
Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk
More informationThermo Scientific Gilmont
Direct Reading Laboratory Flowmeters Instruments Wide selection of flow ranges measure air from 0.02 ml/min to 137 LPM or water from 0.0002 ml/min to 4.1 LPM Excellent chemical compatibility with glass
More informationHigh Pressure Ball Valves Series BVHP. General Description. Operating. Specifications. Features. Performance Curves
Technical Information igh Pressure all Valves eries VP General Description eries VP valves are used for shut-off applications and are rated at 414 ar (6000 PI). The wide variety of porting options plus
More informationTension Brakes/Air Cooled
IST. UTORIZO Tension rakes/ir ooled MX (55) 53 63 23 31 Magnum rakes The Wichita Magnum rake sets new standards in performance, safety and serviceability. The Magnum is easy to apply and simple to service.
More informationBladder Special Orders 46 Accumulator Selection, Commissioning, Installation & Maintenance 47
Product Catalog Table of Contents Section Subject Page Contact Contacting Accumulators, Inc. Ordering Standard Part Number List 3 Accumulator Ordering Table Special Order Products 5 Product Drawings AccuMight
More informationFlow Controls & Accessories
Flow ontrols & ccessories Section V V Flow ontrol Valves SPF Series...2 337 Series...3 3250 Series... 4-5 Miniature Right ngle...6 3251 Series...7 FM701 & FM703 Series...8 F701, F702, FS701 Series...9
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationVickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
More informationTrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
More informationMax. Oper. Pressure Kgf/cm 2. Min. Oper. Pressure. Design. Design Standard. Number
ccumulators ccumulators are mainly used to store pressure fluid and these are used as a hydraulic damper. lthough various types of accumulators are developed today, proper selection should be made for
More informationHousings and miscellaneous parts
Hydraulic Screw-in artridge Valves (SiV) Housings and miscellaneous parts Standard and special valve housings, orifice disks, orifice sizing charts, pilot pistons, adapters, adjustment kits and seal kits
More informationHydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas.
2010 TECHNICAL CATALOG FROM CONCEPT TO PERFORMANCE... KEPNER VALVES DELIVER ZERO LEAKAGE CONTROL! Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas. Kepner Products
More informationHYDRAULIC VARIABLE PUMPS
HYDRAULIC VARIABLE S EFFICIENT VARIABLE DELIVERY Checkball pump delivery is controlled by variable inlet ports in each piston pumping chamber. In these hydraulic variable models, output is regulated by
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationBall Valves. Full Ported Very low pressure drop. Polyamide Thrust Bearings Low actuation torque and high
Features and Advantages Introduction The Parker High Pressure all Valve Product Line serves in applications ranging from 3000 to 10,000 PI. Included in this section is the eries VAL, especially designed
More informationBladder Accumulator 690 to 760 Bar Range
Hydraulic & Offshore Supplies ladder ccumulator 690 to 760 ar Range YOUR GTWY TO GLOL SUPPLY HOS SSMLIS PRSSUR TSTING WLFORM QUIPMNT PCKGS FLNGS PIP & TU Hydraulic HY0-00-S/UK Featur es and imensions ladder
More informationN Series. High Speed Inline Poppet Valves 2 & 3-Way. Section D
Series igh Speed Inline Poppet Valves & 3-Way Section www.parker.com/pneu/n X Viking Z asic Valve unctions...0 Series asic eatures... ommon Part umbers...-3 Model umber Index...4- Technical Information
More informationPDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationProducts Recommended for Steam Service
oss ouplings Products Recommended for Steam Service Quick isconnect ittings ~ actory nly Quick disconnect fittings (socket and plug) are available in solid brass with stainless steel springs and locking
More informationQuick Coupling Products
Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationSuper CB Series Clutch/Brakes
Super Series lutch/rakes Long Life, High Performance esign The Super Series lutch/rakes function in the same manner as the standard Series. The major advantage of the Super Series is extraordinary long
More informationCheck Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationD5 & 10-5 SERIES AIR OPERATED LIQUID PUMPS
D & 1- SERIES AIR OPERATED LIQUID PUMPS PRESSURE RATIO OLD & NEW PART NUMBERS In the mid 199 s with the advent of a new inventory and computer system, SC Hydraulic Engineering was forced to change the
More informationliquid Pumps Air driven contents Chatsworth, California, USA LP500C
LP5C Air driven liquid Pumps contents Principle of Operation, Features, Why Use Air Driven Pumps...2 Typical Applications...3 Model Selection Table...4 Type of Materials in Contact with Fluid, Liquid Compatibility
More informationWorld Pressure Filters. A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration
More informationControl Valves/Meters Grease
Grease 740 WARNING Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726, 81795 Install as shown. Swivels Volume High-Pressure Swivels Model Description Thread Size 81728 Straight 1 /2" NPT(m) x
More informationH25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads
25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationFor High Pressure Applications
For High Pressure pplications SELEXCEL Swivels joints have been carefully designed and manufactured with continuous research and development backing to very close tolerances under rigid quality control
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationIndustrial Lifting Equipment
Industrial Lifting quipment Trolley and Tractor Selection Guide 1/2 20 metric ton Lifting apacity Ingersoll-Rand offers a wide variety of plain, geared or powered trolleys for use with the MLK and HLK
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationMaximum Working Pressure. Code Description Brass
Technical Information Series 500 General escription Series 500 low pressure ball valves provide total shut-off capability for services up to 41 ar (600 PSI). Series 500 consists of PT female/female ports,
More informationSliding Seal & Brass Poppet Valves
Sliding Seal & rass Poppet Valves anually Operated Section PL / VL Series... 2-3 HV Valve... 4-5 Hand Operated Valves,... 6-7 utton Operated Valves...8 Hand / Cam utton Valves...9 leed Valve...10 old text
More informationLOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 224 gpm
LOW PRESSURE FILTERS RFM Series In-Tank Return Line Filters 145 psi up to 4 gpm Technical Specifications Mounting Method 75/9/15/165/185 mounting holes - filter housing D5 Features The compact and lightweight
More informationTrueSeal Fittings. Applications: Markets: Food Potable Water Chemical Filtration. Specifications:
Parker s TrueSeal Fittings are lightweight, field attachable and connect to tubing without the use of tools. These all plastic push-to-connect fittings are manufactured from F compliant materials. Product
More informationNFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports
NFHD Modular Duplex Filter System Pressures to 360 psi Flows to 450 gpm 4 Ports PPLICTIONS HYDC NFHD Return Line Filters are designed for use on hydraulic power units, machine tools, plastics injection
More information