Trio-Cut Circular Thread Milling Tools
|
|
|
- Claire Welch
- 5 years ago
- Views:
Transcription
1 Circular Threa illing Tools ore Ø Threa Page 4 6 x x x x n 3 Applications with only Tool n Threa illing n Threa illing with Unercut n rill illing n High Efficiency 50 luechip Tooling t 203 Torrington Ave Coventry CV4 9UT Tel info@bluechiptooling.co.uk
2 , 2 Circular illing Tools Cutting ata Page 6 Carbie raes Page 79 Inserts see below I / I * 2,0 7,5 2, ,5 7,5 0, SW SF 228/ I / I A / A 2 Ø Form ore Ø Operation T8 IP , only threa milling Steel , only rill milling Steel torque, Nm 2 milling tools can only be use with type 2 milling inserts! Circular illing Inserts * Pitch / Teeth 2 9 7,5 9,07 9 as of 3/8 only ,5 9, P I / I A / A * Pitch / P Teeth ,5, ,5 9, rill milling illing epth 2 2 0,5 7,5 8 (ore Ø 2-4) (ore Ø 4-20) Only for illing Cutters 2362 * The length "" of the Threa illing Insert is measure when the insert is clampe in the holer. luechip Tooling t 203 Torrington Ave Coventry CV4 9UT Tel info@bluechiptooling.co.uk 5
3 , 7 Circular illing Tools Cutting ata Page 6 Carbie raes Page 79 Inserts Page I / I * 7,0 6, ,5 6, ,0 6, A / A * 7,5 6, I / I * * 7,0 4,0 3,6 0, ,5,5 4, 0, ,0 2,0 3,6 0, / SW SF I / I A / A 7 Ø Form ore Ø T5 IP , Steel , Steel torque 3,8 Nm Circular illing Inserts 7 milling tools can only be use with type 7 milling inserts! * 7 6,6 all ,33 5/8 3/4 7/ * The length "" an "" of the Threa illing Inserts are measure when the insert is clampe in the holer. 52 luechip Tooling t 203 Torrington Ave Coventry CV4 9UT Tel info@bluechiptooling.co.uk
4 , 7 Circular illing Inserts I / I 228/ SW SF * 7 4 6,33 ½ profile correcte SW SF 228/ * * I / I A / A 7,54 4,6 0,4 all ,69 3,5 0,4 5/8 3/4 7/ SW SF 228/ * * I / I 7 4 2,69 3,5 0,4 ½ profile correcte P I / I A / A * Pitch / P Teeth , , P I / I A / A * * Pitch / P Teeth , 3,9 0, ,7 3,7 0, rill milling illing epth 7 7,5 0,4 2 (ore Ø 7-9) ,5 0,8 30 (ore Ø 20-32) ,5,2 30 (ore Ø 20-32) 4270 luechip Tooling t 203 Torrington Ave Coventry CV4 9UT Tel info@bluechiptooling.co.uk 53
5 , 20 Circular illing Tools Cutting ata Page 6 Carbie raes Page 79 Inserts see below Form Ø 22 ore Ø T8 IP , Steel torque, Nm 20 Ø 22 ore Ø T8 IP ,5 7,5 2 6 Steel torque, Nm Circular illing Inserts 20 milling tools can only be use with type 20 milling inserts! I / I * 20,0 7,5 2, ,5 7,5 0, SW SF 228/ I / I A / A * ,5 9, ** 4 7,5 9,07 ¾ profile correcte ** for internal threas only rill milling illing epth ,8 7,5 32 (ore Ø 26-40) Only for illing Cutters * The length "" of the Threa illing Insert is measure when the insert is clampe in the holer. 54 luechip Tooling t 203 Torrington Ave Coventry CV4 9UT Tel info@bluechiptooling.co.uk
6 , 25 Circular illing Tools Cutting ata Page 6 Carbie raes Page 79 Inserts see below Form Ø 26 ore Ø T5 IP ,7 07,6 50 Steel ,7 42,6 85 Heavy metal torque 3,8 Nm 25 milling tools can only be use with type 25 milling inserts! Circular illing Inserts I / I * 25,0 6, ,5 6, ,0 6, A / A * 25,5 6, SW SF 228/ I / I A / A * Pitch / Teeth 25 6, , rill milling illing epth 25 7,5 0,8 50/85 (ore Ø 30-50) ,5,2 50/85 (ore Ø 30-50) Only for illing Cutters * The length "" of the Threa illing Insert is measure when the insert is clampe in the holer. luechip Tooling t 203 Torrington Ave Coventry CV4 9UT Tel info@bluechiptooling.co.uk 55
Hitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]
![EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]](/thumbs/72/67540751.jpg "EFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]")
EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
Omslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
AD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
ODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F
OU-MINI-SNAP Series - IP and IP68 P-Locking oncept Keying with Halfshells Series OU-MINI-SNAP Series The Push-Pull Locking Principle: P Locking roove onical Sleeve Locking ingers Outer Housing Back Nut
GMS 32. Double flank testing machine for gears
GMS 32 Double flank testing machine gears Specifications max. diameter of measured gear 100 mm (4'') max. diameter of master gear 80 mm center distance 0... 90mm max. weight of gear 0.5 kg max. testing
UTK/UTT - Multi-blade Damper. Halton UTK, UTT. Multi-blade Damper
Halton UTK, UTT Multi-blade Damper Temperature operation range up to +100 C, optionally up to +200 C Galvanised steel design Classification of casing leakage EN 1751 class B UTK: Shut-off, adjustment,
HIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
Manual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
Piston Seal OE Profile
Seal, PTFE ap Seal atalog EPS 530/US The Parker OE profile is a bi-directional piston seal for use in low to medium duty hydraulic applications. The OE profile is a two piece design comprised of a standard
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
H1600 Mechanical Overload Clutches HOR Series
H1600 Mechanical Overload es HOR Series Section Contents FEATURES... 36 OPERATING PRINCIPLES... 36 SELECTION... 37 HOW TO ORER... 37 RATINGS AN IMENSIONS... 38 MOUNTING HOLE PATTERNS... 42 GENERAL INFORMATION...
TOP DRIVE - HTD - CHD 3M - 5M - 8M - 14M APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL. Office-ATM machines
TOP DRIVE - HTD - CHD Performance index TOP DRIVE HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050. This profile has been used for many
PARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
systems Features Technical Data Spindle Motor Frequency Converter FC 1500-CT Dimensions CNC Base Machines E23 CNC Base Machines SYSTEMS Accessory
Accessory MAV 2.075 S Features Robust two-pole AC motor (asynchronous motor) Rectangular design, protection class IP54, isolation class F Casting bearing plate on A-side Aluminium diecasting B-side Special
FEIN pipe milling machines. The FEIN solution to pipe cutting.
FEIN pipe milling machines The FEIN solution to pipe cutting. Powerful professionals. FEIN pipe milling machines are world reknown in the field of pipe cutting technology. Their applications range from
Piston Seal CQ Profile
Q Profile Q Profile, Premium PTFE ap with nti-rift Technology atalog EPS 530/US The Parker Q profile is a bi-directional piston seal for use in medium to heavy duty hydraulic applications. The Q profile
CONTROL EVOLUTION STANDARD COMPACT. Versatile in use. Perfect sawing and grooving with Striebig.
CONTROL EVOLUTION TANDARD COMPACT COMPOITE PANEL Versatile in use. Perfect sawing and grooving with triebig. Creating ustainable Values Confidence, ability, continuity We are committed to vertical panel
Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
Lecture 13 BEVEL GEARS
Lecture 13 BEVEL GEARS CONTENTS 1. Bevel gear geometry and terminology 2. Bevel gear force analysis 3. Bending stress analysis 4. Contact stress analysis 5. Permissible bending fatigue stress 6. Permissible
Quarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
T L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
SLIDING DOORS SYSTEMS
SLIDING DOORS SYSTEMS COPLANAR SYSTEM FOR CABINET REVERSIBLE SYSTEM Load capacity up to 25kg for one door tested by Catas. Door thickness up to 40mm. Soft closing and soft opening. Cuttable in every customized
Spur gearing, Helical gearing [mm/iso] Pinion Gear ii Project information? i Calculation without errors.
![Spur gearing, Helical gearing [mm/iso] Pinion Gear ii Project information? i Calculation without errors.](/thumbs/80/81955134.jpg "Spur gearing, Helical gearing [mm/iso] Pinion Gear ii Project information? i Calculation without errors.")
S Spur gearing, Helical gearing [mm/iso] i Calculation without errors. Pinion Gear ii Project information? Input section 1. Options of basic input parameters 1.1 Transferred power Pw [kw] 9.67 9.63 1.2
Tension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
Richter Twin Piston Quarter-turn Actuators RA
Richter Twin Piston Quarter-turn Actuators RA Compact Powerful Maintenance-free ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for
8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
CCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12
AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3
New Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
Richter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
METAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
DIGITAL HEIGHT GAUGE. clamp
DIGIT HEIGHT GUGE lamp 55 40 6 Ø8 for 10-0 65 50 10 Ø8 for 10-500/600 0 55 10 Ø8 for 10-0 10-500 10-0 Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inh, BS/INC, ata hol, TO, set BS/INC is for asolute
as a voltage from 0 to 10 V or as a current from 4 to 20
You can use the actuators from Berger Lahr to position flaps, valves or slides with great precision. Inside the compact servo drive housing there is a motor, a gearbox and a control unit. There is a choice
Percussion milling cutters
Impact drilling cutters 1, 1 1/4 14.100 14.120 14.150 1 1 1 4 5 6 26 26 40 3.5 13.6 4.3 13.6 5.4 15.4 26.67 30.44 47.56 14.200* Standard Housing 14.200 14.225* Standard Housing 14.200 1 / 1 1/4 1 / 1 1/4
Tensioners. Stock Program Type B, eccentric, toothed running surface. Polyurethane Timing Belt Drives
Polyurethane Timing elt Drives Tensioners Type, eccentric, toothed running surface Type s run on ball bearings. The bearings are grease lubricated and up to C will experience no reduction in grease life.
Program Internal Gear Set Profile Shift Coefficients With Zero Backlash Introduction
Program 60-107 Internal Gear Set Profile Shift Coefficients With Zero Backlash Introduction The purpose of this model is to provide data for a gear set when the tooth thickness and/or the center distance
TC SERIES THREADMILLING. Threadmilling Insert Nomenclature Chart TI 15 N 8 UN. type of insert. Neutral Positive. insert length
C SERIES HREADMIING hreadmilling Insert Nomenclature Chart I 15 N 8 UN I threadmilling insert insert length type of insert N P 75.750 (19.05) 1 1.000 (25.40) 1.5 1.500 (38.10) hreadmilling Cutter Nomenclature
NEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due
Copy milling cutter RO18
Copy milling cutter RO18 < RDGX insert with facets prevents twisting and defines position while indexing < axial and radial cutting edges guarantee a soft cut < starting from Ø 20 mm Copy milling cutter
Contents. Milling. Solid end mills
UPDATE 2016-2 SOLUTIONS & SUPPORT By choosing Seco, you get more than just a comprehensive portfolio of advanced metal-cutting solutions and expert services. You get a partnership based on trust, respect
Quarter-Turn Pr20.1 L18
1-100.01 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, low profi le 15 Nm IP 65/67 Specially low profile Quarter-Turn. RH or LH application. This Quarter-Turn consists of three basic parts which
GIRTH GEARS AND PINIONS OVERVIEW
GIRTH GEARS AND PINIONS OVERVIEW Girth Gears & Pinions Tubular mills and rotary kiln operations are the life support system for the processing industries, and necessitates reliable and uninterrupted operations.
90 Series - Socket overview for 60 series relays
90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
HepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
Disconnect Switch and Circuit Breaker Mechanism Specifications Bulletin Number 1494
Technical ata isconnect Switch and ircuit reaker Mechanism Specifications ulletin Number 1494 Topic Page 1494U isconnect Switch Specifications 2 1494, 1494F, 1494G, 1494R, 1494V isconnect Switch Specifications
Damping Engineering Radial Dampers RD 240/241. Radial Damper RD 240/241 with Gear Wheel. Installation and Operating Instructions.
Radial Damper RD 240/241 with Gear Wheel For continuous damping with a revolving chain DICTATOR radial dampers provide continuous damping over unlimited distances. Although designed for sliding doors,
1 135 teeth to rack
1. A spur gear with 46 teeth, 2.5 module has to be cut on a column and knee type horizontal milling machine with a rotary disc type form gear milling cutter. The 2.5 module cutter no. 3 is used on a blank
HelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
Hinges. Concealed hinges. Concealed hinge 90 opening
oncealed hinges oncealed hinge 90 opening Pins and links in 430 stainless steel Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or vertical applications.
Motors Automation Energy Transmission & Distribution Coatings. Flat-frame Motors K1F / K2F
Motors Automation Energy Transmission & Distribution Coatings Flat-frame Motors K1F / K2F WEG Group WEG is a leading global solutions provider for drive technology, energy generation and distribution,
Low Voltage Apparatus. Technical Brochure. BaseLine. Fuse Bases OFAX, OFAS_ 690 V. Brochure OFA 1A GB 91-02/ 95-11/97-03.
Technical Brochure Low Voltage Apparatus BaseLine Fuse Bases OFAX, OFAS_ 690 V Brochure OFA 1A GB 91-02/ 95-11/97-03 ABB Control Oy S00279A Fuse Bases OFAX 00, 1, 2 and OFAS_3 Standards: IEC 269-2-1 IN
Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
STOCK RANGE. Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH.
STOCK RANGE 02476 932 999 sales@ajsteelservices.com Unit 16 Crondal Road Bayton Road Industrial Estate Coventry CV7 9NH www.ajsteelservices.com ABOUT ABOUT THE THE COMPANY AJ Steel Services is an independent
COLD SAWS. Manual Semi-Automatic Automatic
COLD SAWS Automatic Metal Cutting COLD SAWS The Baileigh brand stands for excellent quality and support at a competitive price. That thinking was carried over to all of our cold saws and are built to the
PNK-AC CNC CNC - HSS CIRCULAR SAWS GRINDING MACHINE
CNC - HSS CIRCULAR SAWS GRINDING MACHINE PNK-AC PNK-AC-CNC provides full automatic process for the HSS circular saw blades of complete tooth removing, re-toothing, re-grinding and chamfering in only 1-single
PINZBOHR BORING SYSTEM. Index
Index - Rough heads - Finish heads - Micro boring heads & boring bars - A4016 micro heads & 16mmØ shank boring bars - Key to select arbors - Arbors programme - Extensions & reducers - Large diameter boring
Technology of Machine Tools
PowerPoint to accompany Technology of Machine Tools 6 th Edition Krar Gill Smid Gear Cutting Unit 70 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 70-2 Objectives
Manufacturing of milling heads
ry Manufacturing of milling Design & development and production engineering ry Construction with SolidWorks FEM-Simulations with SimulationXpress Direct transfer of CAD data to the production NC-Programming
BU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.
TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter
Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
This table is offered as a guide only and does not take specific applications into account x kw kw = 0,746 x CV Nm = rpm
Dimensioning a shaft - The table below will allow you to determine a shaft diameter based on the type of material to be used and the torque to be transmitted. Material Shaft diameter (mm) Torque (Nm) Ø6
Mechanical. Power Transmission. Timing Pulley Catalogue. Muratech Engineering Company. Products. Delivering Quality Since 1997
Mechanical Power Transmission Products Timing Pulley Catalogue Muratech Engineering Company COMPANY PROFILE Muratech Engineering Company is Leading manufacturing company of Mechanical Power Transmission
SR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
L1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion
SIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
Hitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.2 Indexable illing Too S The new S/HU ini has 2 kinds of insert shapes and applications: JDT type insert for 90 cutting JDT Schneidplatte für 90 earbeitungen
QT Power Chain Sprockets & Belts
QT Power Chain Sprockets & Belts C2 Requires little retensioning Abrasion resistant Less drive maintenance P-1686-TBW 3/18... TB Wood s 888-829-6637 C2-1 QT Power Chain Sprocket 8M Dimensions SPROCKET
HSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
MG 300. Spare parts list. Multi grapple Atlas Copco Construction Tools GmbH No
MG 300 Spare parts list Multi grapple 0 Atlas Copco Construction Tools GmbH No. 3390 7354 0 0046 MG 300 Contents Contents General information................................................................
The new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A
Driven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
Power Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
Patio doors max. Sash width (mm) 365 to Sash height (mm) 550 to Sash weight (kg) max. 100/130 max. 100/130
ALU 5200-D (130 kg) Turn only hardware for hinge clearance (BD) 5 mm BD 5 Size range It is essential to adhere to the details of the system provider. Windows min. max. Patio doors max. Sash width (mm)
Solenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
Xtra-tec. High Performance Cutter F4030
Xtra-tec High Performance Cutter F4030 Table of Content Product description Results from lab and customer Program range Application areas & Target groups Benefits for the customer Typical work pieces 2
2015~2016. Cutting Tools Catalogue
2015~2016 Cutting Tools Catalogue Vol.16B Winstar Cutting Technologies Corp. Is a Taiwanese company that starte operations in the year 2008 by Tim Chen following a ream an personal interest in eveloping
Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
Nitro-Dyne. XP Manifold Cylinders and Systems S OLID AS A R OCK!
H Y S O N P R O U C T S Nitro-yne XP Manifold Cylinders and Systems S OLI S R OCK! I n t r o d u c t i o n In 1964, we delivered our first manifold system to a customer who chose it for its consistent
P (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
ELEMENTS OF METRIC GEAR TECHNOLOGY
ELEMENTS OF METRIC GEAR TECHNOLOGY Gears are some of the most important elements use in machinery. There are few mechanical evices that o not have the nee to transmit power an motion etween rotating shafts.
TORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
Spare Parts. N1 to N8. Spare Parts. Screws N2 Eccentric Pins Lever Pins N4. Clamps Rings Shim Pins Drawing Pins Nuts N6 Spanners N7
1 to 8 Screws 2 Eccentric Pinsever Pins 4 Shims 5 lampsringsshim PinsDrawing Pinsuts 6 Spanners 7 Indications and Symbols mark: Standard stocked item mark: o be replaced by a new item featured on the same
Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
catalogue Endless handling solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS
au Endless handling catalogue solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS INDEX DUGOMRULLI HISTORY 3 PRODUCT RANGE 5 AUTOMOTIVE ROLLER SOLUTIONS 7 COATED PALLET
SYNCHRONOUS BELT DRIVES
Experience The PTH-98 SYNCHRONOUS BELT DRIVES EMERSON POWER TRANSMISSION MORE HORSEPOWER PER DOLLAR... For Positive Performance, Choose... BROWNING Panther Synchronous Drive Systems. Todays Choice For:
INSERT SCREWS FOR MILLING CUTTERS
/ GENERAL INFORMATION INSERT SCREWS FOR CUTTERS Referece Old referece Sie Leght Screwdriver Isert Family 28349 - M 5.0 13.00 T20 5.0 N.m MP 2099 ZP 3200.. 416.1-833 VF 2394 M 3.5 9.40 10 IP 2.0 N.m PT-8007
Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
Sheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
The. 3-circuit. system
L I G H T I N G T R A C K S Y S T E M The 3-circuit system 1 GLOBAL pro, the 3-circuit lighting track system The GLOBAL pro system of the GLOBAL trac family is a complete track system for shops, department