The new performance class...

Size: px
Start display at page:

Download "The new performance class..."

Transcription

1 The new performance class... 10/2017 EP(X)-II 30/40

2 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A B C... N Features: Manual or electric drive Occasional to multiple adjustments daily Low duty cycle Low speed Medium to high stability Width, length and height adjustment 2 Move-Tec Rodless style Drive + Guide

3 EP(X)-II 30/40 tubular linear unit Table of contents Properties/performance data General information / operating conditions... 5 Load data... 5 Geometric moments of inertia... 5 Versions (Dimensions, order numbers) EP-II 30/40 right or lefthand thread EP-II 30/40 right and lefthand thread EP-II 30/40 split screw EPX-II 30/40 right or lefthand thread EPX-II 30/40 right and lefthand thread EPX-II 30/40 split screw Accessories Drive Handwheel Chain wheel Timing-belt pulley Bevel gear set Angle drive Motor adapter / coupling Position determination Positioning indicator Limit switch Move-Tec 3

4 EP(X)-II 30/40 tubular linear unit The latest generation of EP(X)-II 40 twin tube units compensates for high bending moments during hand and motor-driven adjustments Precise / plane mounting surface 9Distortion-free 9 installation Integrated spindle clamping 9Manual 9 force locking spindle clamping optional 0,2 0,2 EP-II 30/40 EPX-II 30/40 Carriage with slide bushings as standard 99Longer lifetime due sleeves made of high performance material Features: High moment capacity Version available with large fixing plate Identical connection sizes as previous version New guide nut concept 99Split nuts, simple replacement no need to dismantle the linear unit 9Longer 9 lifetime due to high performance materials Versions size 30/40 EP-II 30/40 Right or lefthand thread Right and lefthand thread Split Screw EPX-II 30/40 Right or lefthand thread Right and lefthand thread Split Screw Reduced axial play 9Optimised 9 lead screw with fixed bearing in end element Options: Corrosion-protected units Second free moving Protect: with bellows and protection class IP 40 Spindle clamping only at ballscrew spindle units 4 Move-Tec Rodless style Drive + Guide

5 EP(X)-II 30/40 Technical data General information / operating conditions EP-II 30 EPX-II 30 EP-II 40 EPX-II 40 Guide Slide guide Installation position Any position Max. speed m/s (stroke independent) 0.02 m/s (stroke independent) Max. acceleration 3 m/s² Repeatability ± 0,1 mm Max. no-load torque 0,6 Nm 0,7 Nm 0,7 Nm 0,8 Nm Drive Trapezoidal screw, Ø 14, pitch 3 Trapezoidal screw, Ø 20, pitch 4 Lead accuracy (± 0,1 / 300 mm) Duty cycle S3, 30%, base 1h Ambient temperature 0 to +60 C Protection class Basic: no / Protect: IP 40 Static load data* F Force [N] M Moment [Nm] I Geometric moment of inertia [cm 4 ] * with reference to carriage (deflection of guide element f = 0.5 mm, static, end elements supported) Type Fx Fy Fz Total length Mx My Mz EP-II EPX-II EP-II EPX-II Geometric moment of inertia Type Iy Iz EP(X)-II EP(X)-II [cm 4 ] z y Move-Tec 5

6 EP-II 30/40 Dimensions / ordering data Order information: Corrosion-protected units available on request Second non driven carriage available on request Scale upon request Protect: version with bellows optional (IP 40) Version Right or lefthand thread Code No. Type Spindle Basic length B C D1 D2 D3 F G1 G2 H J L1 L2 M1 M2 M3 79_301 1 _ A 30 Tr 14x H8 M6 / 12 M6 / _303 1 _ A _401 1 _ A 40 Tr 20x H8 M8 / 20 M8 / _403 1 _ A x Total length = basic length + travel (minimum travel 50 mm) A = standard B = c/w angle drive on shaft end L1 (see page 19) (Only with spindle bearing ball bearing) A = standard B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing Spindle version: 1 = righthand thread 2 = lefthand thread 6 Move-Tec Rodless style Drive + Guide

7 Total length = basic length + travel Total length R L2 L1 M4 M5 M6 O P1 P2 Q R W1 W2 W3 W x2x x4x32 Max. travel 10 / x2x x4x / / 8.5 Basic length Mass [kg] per 100 mm travel Move-Tec 7

8 EP-II 30/40 Dimensions / ordering data Order information: Please specify basic length and total travel when placing an order Corrosion-protected units available on request Second non driven carriage available on request Scale upon request Protect: version with bellows optional (IP 40) Version Right and lefthand thread Lefthand thread (shaft end L1) Code No. Type Spindle Basic length B C D1 D2 D3 F G1 G2 H J L1 L2 M1 M2 M _ A 30 Tr 14x H8 M6 / 12 M6 / _ A _ A 40 Tr 20x H8 M8 / 20 M8 / _ A x Total length = basic length + total travel (minimum total travel 100 mm) A = standard B = c/w angle drive on shaft end L1 (see page 19) (Only with spindle bearing ball bearing) A = standard B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing 8 Move-Tec Rodless style Drive + Guide

9 Total length = basic length + travel G2 B M6 M1 P2 P1 H Q F C M5 Ø W3 Ø W4 G2 Ø D3 G1 Total length R Ø O L2 L1 D1 M4 M3 M2 Ø D2 Ø W1 Ø W2 J R M4 M5 M6 O P1 P2 Q R W1 W2 W3 W x2x x4x32 2x2x20 4x4x / / 9 Max. travel Basic length Mass [kg] per 100 mm travel / Move-Tec 9

10 EP-II 30/40 Dimensions / ordering data Order information: Please specify basic length and total travel when placing an order Corrosion-protected units available on request Second non driven carriage available on request Scale upon request Protect: version with bellows optional (IP 40) Version Split screw Righthand thread Righthand thread Code No. Type Spindle Basic length B C D1 D2 D3 F G1 G2 H J L1 L2 M1 M2 M _ 1 _ A 30 Tr 14x H8 2 M6 / 12 M6 / x _ 1 _ A 40 Tr 20x H8 3 M8 / 20 M8 / Total length = basic length + total travel (minimum total travel 100 mm) A = standard B = c/w angle drive on shaft end L1 (see page 19) A = standard B = c/w integrated spindle clamping 10 Move-Tec Rodless style Drive + Guide

11 Total length = basic length + travel G2 M6 M1 P2 P1 H Q C M5 ØW3 ØW4 F G2 ØD3 G1 B Total length R L1 ØD1 M4 M3 M2 ØO L2 ØD2 ØW1 ØW2 J R M4 M5 M6 O P1 P2 Q R W1 W2 W3 W4 Max. travel Mass [kg] Basic length per 100 mm travel x2x20 2x2x / 26, x4x32 4x4x / / 8, Move-Tec 11

12 EPX-II 30/40 Dimensions / ordering data Order information: Corrosion-protected units available on request Second non driven carriage available on request Scale upon request Protect: version with bellows optional (IP 40) Version Right or lefthand thread Code No. Type Spindle Basic length B C D1 D2 D3 F G1 G2 G3 H H2 J L1 L2 M1 M2 79_301 1 _ A 30 Tr 14x H8 M6 / 12 2 M6 M6 / _303 1 _ A _401 1 _ A 40 Tr 20x H8 M8 / 20 3 M8 M8 / _403 1 _ A x Total length = basic length + travel A = standard B = c/w angle drive on shaft end L1 (see page 19) (Only with spindle bearing ball bearing) A = standard B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing Spindle version: 5 = righthand thread 6 = lefthand thread 12 Move-Tec Rodless style Drive + Guide

13 Total length = basic length + travel Total length R M3 M5 M6 M7 M8 O P 1 P 2 Q R W1 W2 W3 W4 Max. travel 10 / x2x x2x x4x32 4x4x / / 8.5 Mass [kg] Basic length per 100 mm travel Move-Tec 13

14 EPX-II 30/40 Dimensions / ordering data Order information: Please specify basic length and total travel when placing an order Corrosion-protected units available on request Second non driven carriage available on request Scale upon request Protect: version with bellows optional (IP 40) Version Right and lefthand thread Lefthand thread (shaft end L1) Code No. Type Spindle Basic length B C D1 D2 D3 F G1 G2 G3 H H2 J L1 L2 M1 M _ A 30 Tr 14x H8 M6 / 12 2 M6 M6 / _ A _ A 40 Tr 20x H8 M8 / 20 3 M8 M8 / _ A x Total length = basic length + travel A = standard B = c/w angle drive on shaft end L1 (see page 19) (Only with spindle bearing ball bearing) A = standard B = c/w integrated spindle clamping (Only with spindle bearing ball bearing) Spindle bearing: 1 = ball bearing 0 = slide bearing 14 Move-Tec Rodless style Drive + Guide

15 H H2 Q F C Total length = basic length + travel B M6 M1 P2 P1 M5 Ø W3 Ø W4 G3 Ø D3 G1 Total length R G2 Ø O Ø D2 L2 M7 L1 Ø D1 M3 M2 Ø W1 Ø W2 M8 J R M3 M5 M6 M7 M8 O P 1 P 2 Q R W1 W2 W3 W x2x20 2x2x / 26.5 Max. travel Mass [kg] Basic length per 100 mm travel x4x32 4x4x / / 8, Move-Tec 15

16 EPX-II 30/40 Dimensions / ordering data Order information: Please specify basic length and total travel when placing an order Corrosion-protected units available on request Second non driven carriage available on request Scale upon request Protect: version with bellows optional (IP 40) Version Split screw Righthand thread Righthand thread Code No. Type Spindel Basic length B C D1 D2 D3 F G1 G2 G3 H H2 J L1 L2 M1 M _ 1 _ A 30 Tr 14x H8 2 M6 / 12 M6 M6 / x _ 1 _ A 40 Tr 20x H8 3 M8 / 20 M8 M8 / Total length = basic length + travel A = standard B = c/w angle drive on shaft end L1 (see page 19) A = standard B = c/w integrated spindle clamping 16 Move-Tec Rodless style Drive + Guide

17 Total length = basic length + travel B M6 M1 P2 H2 P1 F H Q C M5 ØW3 ØW4 G3 ØD3 G1 Total length R ØO G1 M3 M2 ØD1 M7 ØD2 L2 L1 ØW1 ØW2 M8 J R M3 M5 M6 M7 M8 O P 1 P 2 Q R W1 W2 W3 W x2x20 2x2x x4x32 4x4x / 26,5 15 / 9 Max. travel Mass [kg] Basic length per 100 mm travel / Move-Tec 17

18 EP(X)-II 30/40 Drive Handwheel Material: Die-cast aluminium, black powder-coated Diam Diam Code No. Type ØA B C D E G P I x x x4 66 Chain wheel Other sizes on request Material: Steel, 500 N/mm² min. Code No. Type A B C D E G No. of teeth Size M x2 10 1/2 x 3/ M x4 13 1/2 x 3/16 HTD timing belt pulley Suitable for maintenance-free continuous operation Excellent accuracy and zero backlash during change of direction Clampable on feather key Material: Steel Code No. Type A B C D E G Tensile force Pitch x2 220 N x4 330 N 5 18 Move-Tec Rodless style Drive + Guide

19 Bevel gear set Straight toothed Contact angle 20 Axial angle 90 Crowned tooth faces Code No. Type A B C D E G Set Single component Set Single component 40 No. of teeth Module Angle drive If angle drives are fitted, the linear units are delivered exclusively with ball bearings G H Delivery contents: Housing, bevel gear set and transmission unit Material: housing-die-cast aluminium, steel parts-zinc plated Power transmission of bevel gears C F D E A Code No. Type A B C D E F G H Assembled to EP (X) p p , Retrofit kit Move-Tec 19

20 EP(X)-II 30/40 Drive Selection table motor adaptor/coupling Type EP(X)-II 30 EP(X)-II 40 Servo motor Three-phase A.C. motor RK-AC 118 RK-AC /120 W 180/250 W Note: For further details on motor versions, please refer to the chapter Motors and controls in our main catalogue Linear Technology. Motor adaptor Simple assembly Exact fit due to centering shoulders Material: Aluminium Code No. Type A B C D E F G M M M M M M ,7 90 M M M Ø120 Ø6.6 Motor adaptor for EHL Linear unit connection EHL connection A C E (E/EP 80=6,5) B D F Ø68,5 Ø64 Ø40 G H 26 (E/EP 80=34) Code No. for linear unit PinØ unit A B C D E F G H L Ø EP(X)-II EP(X)-II Move-Tec Rodless style Drive + Guide

21 Motor adaptor for linear units A E L I C G B F H D Linear unit LZ S Code No. LZ P Code No. Coupling Code No. A B C D E F G H I L EP(X)-II EP(X)-II Coupling Small size Shaft connection without backlash Maintenance-free Easy plug-in assembly Material: Hub aluminium Gear ring polyurethane To ensure the smooth running of the coupling, a clearance of D+3 mm is required. Code No. A B C D E P Torque [Nm] with feather key without feather key , x2 / x2 / 4x x2 / 5x , / 4x x4 / 4x x4 / 4x x4 / 5x x4 / 5x x2 / 4x Further information for adaption and drives see catalogue linear technology, chapter motors & controls. Move-Tec 21

22 EP(X)-II 30/40 Drive Positioning indicator Permitted ambient temperature + 80 C Figure height 6 mm Reading accuracy ± 0.1 mm If positioning indicators are fitted, the linear units are delivered exclusively with ball bearings Material: Housing polyamide 6 Orange RAL 2004, Steel parts corrosion-protected Scope of delivery: Positioning indicator, clamping ring, shaft extension and fastenings Note: rising and falling versions refer to the clockwise rotation of the drive shaft. Installation position: horizontal Installation position: vertical * Version with double lead e.g. for installation on righthand/lefthand thread screws Type Installation position Code No. Version Code No. Version* A B C D E F mm rising mm rising Horizontal mm falling mm falling mm rising mm rising Vertical mm falling mm falling mm rising mm rising Horizontal mm falling mm falling mm rising mm rising Vertical mm falling mm falling Move-Tec Rodless style Drive + Guide

23 EP(X)-II 30/40 Position determination Holder for inductive limit switch Type Square bar 10 mm Limit switch can be moved and fixed axially Movable clamping element Type Max. voltage 250 V AC Max. switching current 6 A Max. starting current 16 A Lifetime 10 million switching cycles Axis lever adjustment locking at 10 increments Protection rating IP 65 Ambient temperature -30 C to +80 C Code No. Type Basic length Version with switch without switch Mechanical limit switch Total length of linear unit Code No. Type Switching function A B C D NC contact / NO contact Limit switch can be moved and fixed axially Type Square bar 10 mm Movable clamping element Type Voltage V DC Max. switching current 200 ma Operating distance 4 mm for steel Protection rating IP 67 Ambient temperature -25 C to +70 C Cable lengths 2m Code No. Type Basic length Version without switch Total length of linear unit Inductive limit switch Code No. Type Switching function L M Wrench size (SW) Changeover 50 12x1 17 Move-Tec 23

24 FAX reply form Yes, I would like to know more about RK linear technology, please: send me details of your product range in PDF format on a CD-ROM EN Flyeralarm MAR /2017 Printed in Germany send me the Linear Technology catalogue contact me Company: Contact partner: Department: Address: Tel. + Fax: Connecting and positioning systems RK Rose+Krieger GmbH Postfach Minden, Germany Telephone: +49 (5) 71/35-0 Fax: +49 (5) 71/ info@rk-online.de Internet:

Profile guide/actuator - RK Compact

Profile guide/actuator - RK Compact Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of

More information

More power with every stroke...

More power with every stroke... More power with every stroke... 04/2017 The LZ FL/PL electric cylinder Greater application flexibility Width, length and height adjustment Features: 99Low adjustment speeds 99Low duty cycle 99Impact resistant

More information

Profile guide/actuator - PLM

Profile guide/actuator - PLM Profile guide/actuator - PLM The small range for positioning small loads Control knob with vernier 9Simple 9 adjustment of carriage Screw cover 9Protection 9 of drive screw against contamination Connecting

More information

Roller guide actuator/guides - SQ /SQZ

Roller guide actuator/guides - SQ /SQZ Roller guide actuator/guides - SQ /SQZ Timing-belt unit with optimum connecting options due to slots in guide profile/carriage Fixing slots 9Easy 9 fixing of linear actuator 9Simple 9 connection of accessories

More information

Ball rail actuator/guide - RK DuoLine Z/R

Ball rail actuator/guide - RK DuoLine Z/R Ball rail actuator/guide - RK DuoLine Z/R All-round talent with protected guide system Fixing slots in the guide profile and carriage 9Simple 9 connection of accessories 9Excellent 9 fixing options for

More information

Automated Format Adjustment

Automated Format Adjustment Automated Format Adjustment reliable and precise in cooperation with 03/2016 Automated Format Adjustment RK Rose+Krieger and LENORD+BAUER benefit from the synergies that arise from the sensible combination

More information

Roller guide actuators - SQ ZST

Roller guide actuators - SQ ZST Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple

More information

Heavy duty cylinder LZ 70/80 TR PL

Heavy duty cylinder LZ 70/80 TR PL Heavy duty cylinder LZ 70/80 TR PL The new generation of industrial linear cylinders Drive options for LZ FL/PL: 9Compatible 9 with all motor manufacturers and types Push rod 9Protection 9 against rotation

More information

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview... SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...

More information

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded

More information

Linear Drive with Ball Screw Drive Series OSP-E..SB

Linear Drive with Ball Screw Drive Series OSP-E..SB Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions

More information

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded

More information

ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS

ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,

More information

124

124 124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High

More information

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17

More information

Toothed belt axes DGE

Toothed belt axes DGE Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching

More information

highlights Double tube linear actuators

highlights Double tube linear actuators highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand

More information

RKPowerlift telescope

RKPowerlift telescope RKPowerlift telescope Two-stage lifting column Multi-stage lifting column - RKPowerlift telescope The RKPowerlift with optimised installation height/stroke ratio Fixing 9Adaptor 9 plate with 4x M8 holes

More information

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7 Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z

More information

Mechanical danger protection acc. to DIN EN ISO 14120

Mechanical danger protection acc. to DIN EN ISO 14120 Mechanical danger protection acc. to DIN EN ISO 14120 RK Safety Guards 1 Safety gurads Introduction Due to the ever increasing automation of manufacturing processes and equipment, the protection of people

More information

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8 Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding

More information

mechanics LES functional overview LES 4 LES 6 LES 5

mechanics LES functional overview LES 4 LES 6 LES 5 LES functional overview LES 4 Overview B-36 B-38 with spindle drive LES 6 B-40 with spindle drive LES 5 B-42 with spindle drive Combination examples Motor modules Clutch housing Motor leads Installation

More information

Linear Axes Technical Data Summary

Linear Axes Technical Data Summary components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468

More information

Electric cylinders. Performance class 2

Electric cylinders. Performance class 2 Electric cylinders Performance class 2 Cylinders - performance class 2 LH15 Electric cylinder LAMBDA Electric cylinder LZ60 Electric cylinder (here with motor fitted in parallel) Features: Wide range of

More information

RODLESS MECHANICAL CYLINDERS

RODLESS MECHANICAL CYLINDERS RODLESS MECHANICAL CYLINDERS RODLESS MECHANICAL CYLINDRES WITH BALL-SCREW DRIVE, CMH CMH: A rodless cylinder whose carriage is positioned by the movement of nuts attached to a baliscrew. Each carriage

More information

Innovation & Excellence. Index. Index. Innovation & Excellence. Introduction. Our Solutions 4-5. MLE / MLZ Series iron core motor

Innovation & Excellence. Index. Index. Innovation & Excellence. Introduction. Our Solutions 4-5. MLE / MLZ Series iron core motor Index Innovation & Excellence Introduction 3 Our Solutions 4-5 MLE / MLZ Series iron core motor 6-7 MLE 2 Linear Units 8-9 MLE 3 Linear Units 10-11 Index MLE 5 Linear Units MLE 7 Linear Units MLZ 2 Linear

More information

Catalogue. Portal Axes PAS

Catalogue. Portal Axes PAS Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35

More information

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Max. particle size 5 µm. Pressure for determining piston forces. Materials: Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile

More information

Electric cylinders. Performance class 1

Electric cylinders. Performance class 1 Electric cylinders Performance class 1 Cylinders - performance class 1 M9 Electric cylinder M10, LH10; LH11; LH950 Electric cylinder Features: M9, M10, LH10; LH11 and LH950 are maintenance-free due to

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS

More information

Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS

Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the

More information

mechanics LES functional overview LES 4 LES 6 LES 5

mechanics LES functional overview LES 4 LES 6 LES 5 LES functional overview LES 4 with spindle drive Overview 2-54 2-56 LES 6 2-58 with spindle drive LES 5 2-60 with spindle drive Calculations 2-62 Combination examples Motor modules Clutch housing Motor

More information

Product features & Overview. KA Linear actuators

Product features & Overview. KA Linear actuators Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range

More information

PNCE ELECTRIC CYLINDER

PNCE ELECTRIC CYLINDER ELECTRIC CYLINDER INDEX Characteristics 1 Structural design 2 How to order 3 Technical data 4 Dimensions 11 Accessories 12 Lubrication position 2 Motor adapter with coupling 2 Motor side drive with timing

More information

MTB 42 Belt Driven Linear Actuator

MTB 42 Belt Driven Linear Actuator LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features

More information

SNR, YOUR GUIDE TO LINEAR MODULES

SNR, YOUR GUIDE TO LINEAR MODULES SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has

More information

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46 Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS

More information

ndustr SNR our guide to linear modules

ndustr SNR our guide to linear modules ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections

More information

Linear actuator. Product features. Overview. Wide range of force outputs. Wide selection of column adapters. Wide selection of flanges

Linear actuator. Product features. Overview. Wide range of force outputs. Wide selection of column adapters. Wide selection of flanges V Linear actuator Product features Wide range of force outputs Wide selection of column adapters Large stroke range Wide selection of flanges Constant positioning times under fluctuating loads Solid metal

More information

RKPowerlift. Two-stage lifting column

RKPowerlift. Two-stage lifting column RKPowerlift Two-stage lifting column Two-stage lifting column - RKPowerlift The power pack for high bending moments Fixing 99Tapped hole for simple mounting classic design technic design wave design Fixing

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

Mini slides EGSL, electric

Mini slides EGSL, electric Key features At a glance Electric slide series Maximum performance in compact space: Precision Load capacity Dynamic response Choice of homing: To fixed stop To reference switch Perfect for vertical applications

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP) RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can

More information

Linear Actuator with Toothed Belt Series OSP-E..B

Linear Actuator with Toothed Belt Series OSP-E..B Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7

More information

WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail.

WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail. WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail. WIESEL POWERLine WM40 The linear drive unit for miniaturized applications. High performance

More information

KLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121

KLM. Application example. Linear modules Pneumatic Stroke module.  1 Single base support, SOE Adapter plate, APL 121 KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis

More information

Portal modules.

Portal modules. Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology

More information

Gearboxes & Motor Mounts

Gearboxes & Motor Mounts Gearboxes & Motor Mounts Contents Description Page Gearbox for BHD Series 162-164 Gearbox for OSP-E Belt 165-168 Motor Mounts 169-170 Belt Gear for OSP-E..S, SBR 171 161 PLANETARY GEARBOX FOR THE OSP-E

More information

LM-P608 Portal Axis. Features. Versions

LM-P608 Portal Axis. Features. Versions The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications

More information

Electric Mini Slides MSC-EL

Electric Mini Slides MSC-EL Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6

More information

Gearboxes & Motor Mounts

Gearboxes & Motor Mounts Gearboxes & Motor Mounts Contents Description Page Gearbox for BHD Series 134-136 Gearbox for OSP-E Belt 137-140 Motor Mounts 141-142 Belt Gear for OSP-E..S, SBR 143 133 PLANETARY GEARBOX FOR THE OSP-E

More information

Accessories smart additions for efficiency and intelligent performance

Accessories smart additions for efficiency and intelligent performance smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics

More information

Spindle axes DGE Key features

Spindle axes DGE Key features Spindle axes DGE Spindle axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching drive units

More information

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES

More information

ORIGA Pneumatic Linear Drives OSP-L

ORIGA Pneumatic Linear Drives OSP-L ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.

More information

POWER GEAR. The HighSpeed bevel gearbox.

POWER GEAR. The HighSpeed bevel gearbox. MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWER GEAR The HighSpeed bevel gearbox HS www.graessner.de Nothing but highlights! Designed for special requirements no adaption, no compromises: There are decades

More information

Mini slide EGSC-BS-KF. Operating instructions b [ ]

Mini slide EGSC-BS-KF. Operating instructions b [ ] Mini slide EGSC-BS-KF en Operating instructions 8081968 2017-11b [8081970] Translation of the original instructions EGSC-BS-KF-EN Identification of hazards and instructions on how to prevent them: Danger

More information

PNCE ELECTRIC CYLINDERS

PNCE ELECTRIC CYLINDERS ELECTRIC CYLINDERS Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

Product information PI Disk-type tool turret

Product information PI Disk-type tool turret Product information PI 43.2 Disk-type tool turret without tool drive Series 0.5.440.xxx with tool drive Series 2017-05-31 0.5.433. / 436.xxx 0.5.435.xxx Table of Contents PI 43.2 Disk-Type Tool Turret

More information

Guide axes ELFA, without drive

Guide axes ELFA, without drive Guide axes ELFA, without drive Guide axes ELFA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The guide axis is designed to support force and torque

More information

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL

Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM) LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up

More information

RasuunDrive. HighVac 10mm - Type 3. Technical Supply Specifications: RasuunDrive HighVac 10mm - Type 3. Attributes. Highlights.

RasuunDrive. HighVac 10mm - Type 3. Technical Supply Specifications: RasuunDrive HighVac 10mm - Type 3. Attributes. Highlights. RasuunDrive HighVac 10mm - Type 3 Attributes Highlights Description Wide travel range Vacuum suitable lubrication Zero backlash at optimised fit between speed and resolution Integrated limit switches Easy

More information

WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt

WIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear

More information

110

110 110 www.danahermotion.com Linear Units Linear Lifting Units SpeedLine, Movo Z Developed for lifting applications Telescopic models available Models with ball screw or belt drive Load up to 750 kg High

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL) LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.

More information

LINEAR UNITS CT & MT

LINEAR UNITS CT & MT LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right

More information

Берг АБ Тел. (495) , факс (495)

Берг АБ Тел. (495) , факс (495) AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection

More information

LM SERIES LINEAR MODULE

LM SERIES LINEAR MODULE LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.

More information

Toothed belt axis ELGC-TB-KF. Operating instruction [ ]

Toothed belt axis ELGC-TB-KF. Operating instruction [ ] Toothed belt axis ELGC-TB-KF en Operating instruction 8068220 2017-02 [8068222] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which can

More information

mechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216

mechanics RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 Overview RDH-M Indexing Table/Rotary Axis B 210 RDH-S Indexing Table/Rotary Axis B 212 RF 1 Indexing Table B 214 D 1 Indexing Table B 216 D 2 Indexing Table B 218 MD 1 Midget Rotary Axis B 220 ZR 20 Indexing

More information

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high

More information

Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS

Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Contents Modular Electric Actuators OSP Concept Origa System Plus Electric Actuator OSP-E, Modular Components - Overview Page 4 Applications for OSP-E

More information

Lexium Linear Motion

Lexium Linear Motion Linear axes and multi-axis systems Catalogue April 2011 All technical information about products listed in this catalogue are now available on: www.schneider-electric.com Browse the product data sheet

More information

GRIPPERS SERIES P3 - P12 ACTUATORS

GRIPPERS SERIES P3 - P12 ACTUATORS GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made

More information

LINEAR MOTION SLIDES

LINEAR MOTION SLIDES LINEAR MOTION SLIDES INTRODUCTION Efficiency in automation can only be attained with simplified processes and systems. To achieve this task, aluminum profile systems and modules suitable for automated

More information

DGE Linear Actuators. Belt and Ball Screw Driven. Info 130 US

DGE Linear Actuators. Belt and Ball Screw Driven. Info 130 US DGE Linear Actuators Belt and Ball Screw Driven Belt Driven Linear Actuators Sizes: 8, 12, 18, 25, 40, 63 Stroke Lengths up to 5 m Maximum Speed: 10 m/s Repeatability of ±0.10 mm Axial force up to 1,500

More information

Actuator Units NEW All-in-one-solution

Actuator Units NEW All-in-one-solution Actuator Units NEW All-in-one-solution Axis Servo Motor Amplifier Actuator Units Economy Series ES4 p. 06-07 ES6 p. 08-09 EC3 p. 10-11 EC4 p. 12-13 LM Guide Actuator KR26 p. 16-17 KR33 p. 18-19 Linear

More information

Linear drives DGC Key features

Linear drives DGC Key features Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:

More information

EJP SERIES Right-angle Worm

EJP SERIES Right-angle Worm EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals

More information

Low backlash planetary gearheads Economy

Low backlash planetary gearheads Economy Low backlash planetary gearheads Economy LP + Innovation sets standards The low-backlash LP + planetary gearhead extends and completes the product portfolio. Up to 75% higher torques oise level halved

More information

ELGC-BS-KF. Spindle axis. Instructions Operating c [ ]

ELGC-BS-KF. Spindle axis. Instructions Operating c [ ] ELGC-BS-KF Spindle axis Instructions Operating 8095590 8095590 2018-08c [8095592] Translation of the original instructions 2 Festo ELGC-BS-KF 2018-08c Table of contents 1 Further applicable documents...

More information

ACTUATORLINE ELM series

ACTUATORLINE ELM series ACTUATORLINE ELM series www.rolloncorp.com www.motiontech.com.au Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 ELM 50 SP 6 ELM 65 SP 7 ELM 80 SP

More information

alpha Value Line - NPS Sizing and Technical Data Efficient Flexible Reliable

alpha Value Line - NPS Sizing and Technical Data Efficient Flexible Reliable alpha Value Line - NPS Sizing and Technical Data Efficient Flexible Reliable alpha Value Line NP NPS NPL NPT NPR Ratios 3-100 Torsional backlash [arcmin] 8 Output type Smooth output shaft Grooved output

More information

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed

More information

technology made in Italy

technology made in Italy technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission

More information

Electric slides EGSK/EGSP

Electric slides EGSK/EGSP Electric slides EGSK/EGSP Electromechanical drives Selection aid Overview of toothed belt and spindle axes Toothed belt axes Spindle axes Coordinate system Speeds of up to 10 m/s Acceleration of up to

More information

LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7

LONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7 DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...

More information

96

96 96 www.danahermotion.com Linear Units Linear Units with Belt Drive and Wheel Guide SpeedLine, ForceLine Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness

More information

mechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162

mechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary

More information

Linear Guides Series OSP-E

Linear Guides Series OSP-E Linear Guides Series OSP-E NEW Contents Description Page Overview 101-102 Plain Bearing SLIDELINE 103-104 Roller Guide POWERSLIDE 105-108 Aluminium Roller Guide PROLINE 109-111 Heavy-duty guide HD 113-115

More information

Product information PI Disk-type tool turret

Product information PI Disk-type tool turret Product information PI 43.2 Disk-type tool turret without tool drive 2011-05-09 mit tool drive Series 0.5.433. / 436.xxx 0.5.435.xxx Table of Contents PI 43.2 Disk-Type Tool Turret 1:2 Series without

More information