Threadmill Nomenclature TR N L ISO C
|
|
|
- Delilah Clark
- 5 years ago
- Views:
Transcription
1 Threami Nomencature TR N ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia mm mm mm mm mm mm mm mm mm 4 - Cutting ia mm 5 - Cutting ength mm 6 - Threa itch/ti mm TI 7 - Threa Form ISO - ISO UNC - Unifie Coarse UNF - Unifie Fine UNEF - Unifie Extra Fine BSW - British Stanar Whitworth BSF - British Stanar Fine BS - British Stanar ipe BST - British Stanar ipe Taper NT - Nationa ipe Threa NTF - Nationa ipe Threa Fue 8- Through Hoe Cooant 4 C - With Cooant
2 ISO Metric ISO mm Cataogue Number itches Futes M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M18-M TRN ISO M TRN ISO ISO Fine mm Cataogue Number itches Futes M TRN ISO M TRN ISO M TRN ISO M TRN ISO M TRN ISO M17-M TRN ISO ISO mm Cataogue Number itches Futes M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M18-M TRN ISO-C M TRN ISO-C ISO Fine mm Cataogue Number itches Futes M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M TRN ISO-C M17-M TRN ISO-C A threamis can be use to machine threas on arger iameter components.
3 UNIFIE UNC TI Cataogue Number itches Futes No TRN UNC /4" 20 TRN UNC /16" 18 TRN UNC /8" 16 TRN UNC /16" 14 TRN UNC /2" 13 TRN UNC /16" 12 TRN UNC /8" 11 TRN UNC /4" 10 TRN UNC /8" 9 TRN UNC " 8 TRN UNC UNF TI Cataogue Number itches Futes No.8 36 TRN UNF No TRN UNF No.12 1/4" 28 TRN UNF /4" 28 TRN UNF /16" 3/8" 24 TRN UNF /16" 1/2" 20 TRN UNF /16" 5/8" 18 TRN UNF /4" 16 TRN UNF /8" 14 TRN UNF /2" 12 TRN UNF UNEF TI Cataogue Number itches Futes 7/16" 1/2" 28 TRN UNEF /16" 11/16" 24 TRN UNEF /4" 1" 20 TRN UNEF A threamis can be use to machine threas on arger iameter components.
4 UNIFIE UNC TI Cataogue Number itches Futes No TRN UNC-C /4" 20 TRN UNC-C /16" 18 TRN UNC-C /8" 16 TRN UNC-C /16" 14 TRN UNC-C /2" 13 TRN UNC-C /16" 12 TRN UNC-C /8" 11 TRN UNC-C /4" 10 TRN UNC-C /8" 9 TRN UNC-C " 8 TRN UNC-C UNF TI Cataogue Number itches Futes No TRN UNF-C No.12 1/4" 28 TRN UNF-C /4" 28 TRN UNF-C /16" 3/8" 24 TRN UNF-C /16" 1/2" 20 TRN UNF-C /16" 5/8" 18 TRN UNF-C /4" 16 TRN UNF-C /8" 14 TRN UNF-C /2" 12 TRN UNF-C UNEF TI Cataogue Number itches Futes 7/16" 1/2" 28 TRN UNEF-C /16" 11/16" 24 TRN UNEF-C /4" 1" 20 TRN UNEF-C A threamis can be use to machine threas on arger iameter components.
5 WHITWORTH 55 R0.137 Whitworth BSW TI Cataogue Number itches Futes 1/4" 20 TRX BSW-C /16" 18 TRX BSW-C /8" 16 TRX BSW-C /16" 14 TRX BSW-C /2" 12 TRX BSW-C /8" 11 TRX BSW-C Whitworth BSF TI Cataogue Number itches Futes 5/16" 22 TRX BSF-C /8" 20 TRX BSF-C /16" 18 TRX BSF-C /2" 9/16" 16 TRX BSF-C /8" 11/16" 14 TRX BSF-C /4" 12 TRX BSF-C /8" 11 TRX BSF-C A threamis can be use to machine threas on arger iameter components.
6 BS 55 R0.137 Whitworth BS TI Cataogue Number itches Futes 1/16" 1/8" 28 TRX BS /8" 28 TRX BS /4" 3/8" 19 TRX BS /8" 19 TRX BS /2" 3/4" 14 TRX BS " 1 1/2" 2" 2 1/2" 11 TRX BS STRAIGHT FUTE Whitworth BS TI Cataogue Number itches Futes 1/16" 28 TSX BS /4" 19 TSX BS /2" 14 TSX BS " 11 TSX BS Whitworth BS TI Cataogue Number itches Futes 1/16" 1/8" 28 TSX BS-C /8" 28 TSX BS-C /4" 3/8" 19 TSX BS-C /8" 19 TSX BS-C /2" 3/4" 14 TSX BS-C " 1 1/2" 2" 2 1/2" 11 TSX BS-C A threamis can be use to machine threas on arger iameter components.
7 BST R ' BST TI Cataogue Number itches Futes 1/16" 28 TRX BST /8" 28 TRX BST /4" 19 TRX BST /8" 19 TRX BST /2" 3/4" 14 TRX BST " 1 1/2" 2" 2 1/2" 11 TRX BST STRAIGHT FUTE BST TI Cataogue Number itches Futes 1/16" 28 TSX BST /4" 19 TSX BST /2" 14 TSX BST " 11 TSX BST BST TI Cataogue Number itches Futes 1/16" 28 TRX BST-C /8" 28 TRX BST-C /4" 19 TRX BST-C /8" 19 TRX BST-C /2" 3/4" 14 TRX BST-C " 1 1/2" 2" 2 1/2" 11 TRX BST-C A threamis can be use to machine threas on arger iameter components.
8 NT ' NT TI Cataogue Number itches Futes 1/16" 27 TRX NT /8" 27 TRX NT /4" 18 TRX NT /8" 18 TRX NT /2" 3/4" 14 TRX NT " 2" 11.5 TRX NT /2" 3" 8 TRX NT STRAIGHT FUTE NT TI Cataogue Number itches Futes 1/16" 27 TSX NT /4" 18 TSX NT /2" 14 TSX NT " 11.5 TSX NT /2" 8 TSX NT NT TI Cataogue Number itches Futes 1/16" 27 TRX NT-C /8" 27 TRX NT-C /4" 18 TRX NT-C /8" 18 TRX NT-C /2" 3/4" 14 TRX NT-C " 2" 11.5 TRX NT-C /2" 3" 8 TRX NT-C A threamis can be use to machine threas on arger iameter components.
9 NTF ' NTF TI Cataogue Number itches Futes 1/16" 27 TRN NTF /8" 27 TRN NTF /4" 18 TRN NTF /8" 18 TRN NTF /2" 3/4" 14 TRN NTF " 2" 11.5 TRN NTF /2" 3" 8 TRN NTF STRAIGHT FUTE NTF TI Cataogue Number itches Futes 1/16" 27 TSX NTF /4" 18 TSX NTF /2" 14 TSX NTF " 11.5 TSX NTF /2" 8 TSX NTF NTF TI Cataogue Number itches Futes 1/16" 27 TRX NTF-C /8" 27 TRX NTF-C /4" 18 TRX NTF-C /8" 18 TRX NTF-C /2" 3/4" 14 TRX NTF-C " 2" 11.5 TRX NTF-C /2" 3" 8 TRX NTF-C A threamis can be use to machine threas on arger iameter components.
10 Recommene Cutting Spees an Fees Spee Fee/Tooth fz Fee/Tooth fz Materia Metres/Min 8.0 Ø > 8.0 Ø ow/me. Carbon Stee High Carbon Stee High Carbon Stee Stainess Stee Cast Iron Non Ferrous Nicke Chrome Aoys Titanium Aoys Iron Base Aoys Cobat Base Aoys Recommene Cutting Spees an Fees Materia Groups Cutting Spees Fee / Tooth fz Materia Metres/Min TRN TSN TRN - C ow/me. Carbon Stee High Carbon Stee High Carbon Stee Stainess Stee Cast Iron Non Ferrous Nicke Chrome Aoys Titanium Aoys Iron Base Aoys Cobat Base Aoys The Cutting spee an fee on the too arc path to the start of the threa cut must be equa to the that of the threaing cyce.
11 Machining Recommenations Operation The bore for interna threas, or the outsie iameter for externa threas, shou be prouce to the minor iameter for interna an major iameter for externa threas, prior to the threa miing operation. For interna threas it is preferabe to start the threaing operation from the bottom of the hoe an fee outwars, this reuces the possibiity of amage by the swarf prouce an cimb miing is recommene When entering into the cut it is recommene that the too is introuce to the cut on a raia path taking 45 to reach fu epth of threa, simutaneousy the too shou move 1/8 pitch of the threa in the z axis to prevent threa thinning. 1 2 Start osition. Rapi fee own to threa E.g. X0, Y0, Z0 ength pus one pitch. E.g. Z minus 3 4 Fee in to within 0.05mm of Arc on to fu epth of threa minor iameter of threa. over 45 simutaneousy moving up x pitch at pre Y+ Y+ X- X+ Y- X- X+ Y- 5 6 Compete one circuar movement Arc off over 45 to No 3 to machine threa, whie moving position whie moving up up 1 x pitch x pitch. Y+ Y+ X- X+ Y- X- X+ Y- 7 Rapi back to Start osition E.g. X0, Y0, Z0 rior to the threa miing operation osithrea recommen that the bore is machine
12 To cacuate Spee an Fee (1) Cacuate R..M. of cutter N = R..M. V = Recommene Cutting Spee Machining Recommenations = iameter of cutter N = 1000 x V = Require R..M. x Π (2) Cacuate Fee per revoution F1 = Fee at cutting ege fz = Recommene fee per tooth Z = Number of teeth (futes) N = R..M. F1 = fz x Z x N = Fee in mm/min at cutting ege (3) Cacuate fee at too centre ine Interna Threas F2 = Fee at centre ine of cutter F1 = Fee at cutting ege 0 = Major iameter of component = Cutter iameter F2 = F1 x (0 - ) = Fee at cutter centre ine mm/min. 0 (4) Cacuate fee at too centre ine Externa Threas F2 = F1 x (0 + ) 0 rogram exampe (Fanuc ) Threa: M24x x 3.0 x 39.0 Too: TRN ISO Materia: Stainess Stee T00 M06 G21 S1450 M03 G00 G90 X0.000 Y0.000 M08 G43 H00 Z0.000 G91 (Fast fee to epth) G01 X0.000 Y0.000 Z F902.2 (Fee to arc in start aing ra comp) G01 X2.025 Y Z0.000 F152 G41 00 (Arc on) G03 X2.025 Y2.025 I J Z0.678 F152 (Machine threa) G03 X0.000 Y0.000 I J Z3.000 F152 (Arc out) G03 X Y2.025 I J Z0.678 F152 (Fast fee to centre removing ra comp) G01 X Y Z0.000 F451.1 G40 00 (Fast fee to start) G00 X0.000 Y0.000 Z F0.0 M05 (Too change) rograms can vary with ifferent CNC contros. 0 Machining Taper Threas rior to the threa miing operation osithrea recommen that the bore is machine to the finishe taper minor iameter size. When threa miing taper threas in orer to machine an accuratey finishe part, the too path must be programme to achieve this ange. The ange for BST an NT threas is 1:16 or This ange is prouce on the threa mi cutter, but in operation the too moves in a vertica straight ine in Z axis. In orer to correct the error the use of quarant move programming is require. Therefore the X an Y axis arc positions are compensate for every 90 movement of the too. The amount move in each quarant is: itch x Tan For a 14NT threa the quarant movement X an Y = mm 4 Interna Too Centre ine Externa Too Centre ine 0
13
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
Mini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
EX-(SUS) SERIES. TiN-coated HSSE precision drills EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
EX-(U) ERIE TiN-coate HE precision ris EX-U-G EX-U-GR EX-G EX-GR X Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes, increments
GStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
Gennaio TiN-coated HSSE precision drills EX-(SUS) SERIES EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
TiN-coate HE precision ris EX-(U) ERIE EX-U-G EX-U-GR EX-G EX-GR Gennaio 2017 Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes,
Thread Milling TOOLCUT.
OOCUT Threa Milling TOOCUT. OOCUT SCHWARZ beliefert als Hersteller seine Kunen weltweit mit hochpräzisen Zerspanungswerkzeugen un garantiert Ihnen eine hohe Qualität un Stanzeit. Namhafte Unternehmen aus
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
ThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
CATALOG 2017 SERIES 1
CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
PRODUCT INFORMATION. HSS NON-STEP EXTRA LONG DRILLS 10 D, 15 D and 20 D! VOL.3 TDXL TDXL
PROUCT INFORMATION HSS NON-STEP EXTRA ONG RIS, an 2! VO.3 1 Newy eveope fat fute (Pat. P.) 2 4 Newy eveope ow-resistance thinning (Pat. P.) Newy eveope WX coating for ris 3 features four newy eveope technoogies
KENNAMETAL HERTEL FIX-PERFECT
KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
HIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
Tension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2
Stanar Quick-Disconnect Coupings Series ES one-way shut-off Materias a PN 35 bar -20 C +100 C air a.o. 7,2 ISO 228/DIN 2999/DIN 13 1100 L/min yes 1-way Eur. Stanar wor-wie 10 Coupings with mae threa Threa
CATALOG 2016 SERIES 1
CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
High-performance milling tools New tools 2017
passion for precision High-performance miing toos New toos 2017 New cutting data cacuator TooExpert MFC End miing toos for stee, stainess stee, titanium and nicke Cyindrica Smooth-edged, norma version
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
On the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1
Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................
Tungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
PRODUCT CATALOG /613 HIGH PERFORMANCE MICRO DRILLS PILOT DRILLS & STEP DRILLS INTERNAL COOLANT DRILLS SINGLE FLUTE END MILL
5 x x 614 638 HIGH PERFORMANCE MICRO DRILLS PILOT DRILLS & STEP DRILLS 612/613 INTERNAL COOLANT DRILLS SINGLE FLUTE END MILL 638 MICRO END MILLS PRODUCT CATALOG 2014-2015 GERMAN SWISS MACHINES Fax: +91
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
RNFTL A5 S RS2510A20. Rolled ball screws B256
oe ba screws -I-6.5 oe a Screw Series (1) Prouct cassification NSK roe ba screws are cassifie by nut moe as shown in abe I-6.4. abe I-6 4 Cassification of roe ba screws moe shape ecircuation system cassification
SIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
Balfit Hydraulic Hose Fittings
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
Premium quality cutting tools. Super Drills. Gold Drills
Premium quaity cutting toos Super Dris God Dris Super Dris (Precision driing on hard materia) ØD h8 ±3 o SPLIT 1 o POINT L1 HELIX ANGLE L APPLICATION : Driing aoy stee up to 28-35 HRc. Suitabe for driing
Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2
Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................
4.2 Method of measurement with Over balls or Rollers
m 4. Metho of measurement with Over balls or Rollers For spur gear, putting Over balls or Rollers to Spacewith. External gear is measure by outsie imension of Over ball or Rollers. Internal gear is measure
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
MINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM
Dispacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 PM GEA MOTOS JM Gear Motor Cataogue JM TABE OF CONTENTS DESCIPTION......................................................................................................................
Blanking tools for the automotive industry
anking toos for the automotive industry 1736 006 3 rt.-nr..400.03.0706.01000 07/006 17363 00 1 anking toos for the automotive industry Tabe of contents age age FIRO Tradition and Technoogy 6 7 0. 1.. 3.
Split pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
AD & ADO SERIES Volume 4
New carbie ri series A & AO ERIE Voume 4 N E W C O A T I N G A - A O N E W E R I E A - A O N E W E R I E 78 IN N E W C O A T HANK IZE AE I N G A - A O N E W E R I E E R I E A - B R A N E R I E A - B R
New Mini Tools Inch 2016
TM -treme thread cutting New Mini Tools Inch 2016 Mini Tools Vertical s and Toolholders for threading, chamfering, grooving and turning Carbide grade: BLU-Sub-micron grade with advanced PV triple layer
Shaft Locking Devices
abe of Contents JW Shaft ocking evices In his Section: Sef-Centering Series SS ow orque Series SS Meium orque Series SS High orque Series SS Heavy uty Series SS S www.ovejoy-inc.com 425 S-1 abe of Contents
Indexable Milling Tools
No. 315.4 Short Name Type: CRBIE Page Ba High Precision Finish - Carbide Shank Reguar BPF-W 8 5 4 BPF-W Ba High Precision Finish - Carbide Shank ong Neck 8 1 4 BPF-WE Ba High Precision Finish - Carbide
How to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator.
Compact Side Series MXU How to Order MXU A90V S Compact side Bore size 1 ø ø ø1 1 2 Stroke mm mm 1mm mm 2mm mm Number of auto switches 2 Auto switch S 1 Without auto switch (Buit-in magnet) Appicabe Auto
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK
Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
Trio-Cut Circular Thread Milling Tools
Circular Threa illing Tools ore Ø Threa Page 4 6 x 2 5 9 20 x 7 52-53 22 24 x 20 54 26 30 x 25 55 n 3 Applications with only Tool n Threa illing n Threa illing with Unercut n rill illing n High Efficiency
SIT V-Pulleys V-PULLEYS.
www.sitspa.co SIT V-Pueys on the arket there are various s V-bets, aong which, the ost 'wiesprea are: narrow Sp-Spa-Spb-Spc (iso4184 - Din 7753) cassic -a-b-c (iso 4184 - Din 2215) aerican narrow 3V-5V
GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
Omslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
Threading. Stellram offers high performance grades suitable for all machining applications, in a wide range of materials, for maximum productivity.
Threading Stellram s comprehensive threading program is available in a wide range of thread forms. artial and full pro le inserts are offered for thread turning. Stellram offers high performance grades
BNZ Small hole boring bars DAL / DDL / DML. G High speed machining for super finishing hardened steel (HRC50~60) G Excellent surface roughness
SUMIBOON / SUMIDIA Precision BNBB M20 Sma hoe boring toos CBN cutting edge is brazed on to a soid carbide shank. Sma hoe boring BNZ M21 Sma hoe boring bars Soid carbide boring bars WB M22 CBN rooving System
n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
KNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP
-Taster V- COE 219-001 Find your exact zero points in all three axes in seconds with the new distance measurin scale (raduated and analoue). 20 h 7 =12 With Standard Stylus %OFN VFOH IRU UGO GHÀHFWRQ HG
Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
Incremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
ANSI VALVE CATALOGUE
ANSI VAVE CATAOGUE GATE VAVES GOBE VAVES CHECK VAVES BA VAVES BUTTERFY VAVES SYSTEMS AND PRODUCTS FOR INDUSTRIA CARGO TRANSFER AND STORAGE ANSI VAVE CATAOGUE Introuction CTS has evelope itself into a reputable
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...
Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,
Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
ROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
GLOBE VALVE APPLICATION
SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,
HURCO VDI40 TOOLING FOR HURCO
HURCO VDI40 TOOLING FOR HURCO Tae of Contents Quick Change Tooing Page 4 LinA Broach Page 5 Axia Page 6-8 Raia Page 7-9 Ajustae Ange Page 9 Static Toos Page 10-18 Accessories Page 19-21 2 Mouar esign for
Extremely uniform liquid distribution Wide flow rate range Large number of available spray angles
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
Shyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS
CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically
HKK CURVED JAW COUPLINGS HITEX COUPLINGS
HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
Looking for a gas spring replacement...
Welcome to... ooking for a gas spring replacement... For over 40 years ACE has been successfully manufacturing and supplying a wide range of motion control products. Industrial gas springs have always
(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
ITM HSS GROUND THREAD HAND TAPS - MACHINE SCREW
TAPER 8 to 10 threads chamfered for easy thread starting in tough materia. PLUG BOTTOMING 3 to 5 threads chamfered for genera use when tapping to bottom of hoe is not critica. This is the most popuar tap
The Ultimate Solid Carbide Indexable Drill with a
The Ultimate Solid Carbide Indexable Drill with a Chamfering Option! Replaces Any Cylindrical Solid Carbide or High Speed Steel Drill www.iscar.com Engineered for Chamfering Performance Modular System:
Triple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
Manual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
CUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
PRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD