Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
|
|
- Juliana Hoover
- 5 years ago
- Views:
Transcription
1 Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon shaped Eye bolt/eye nut. RUD 4:1 ID M MF UNC BSW G C 400 C max. only UNF 8UN Considerably higher WLL (in comparison to DIN 580/582) at vertical load. Large thread and WLL range (M6-M48, 0.1 t 8 t). Standard Metric Thread (DIN EN 13) Metric Fine Thread (DIN EN 13) Coarse Pitch Thread UNC (ANSI B1.1) only : Fine Thread UNF (ANSI B1.1) Fine Thread 8UN (ANSI B1.1) Coarse thread BSW (BS 84) Inch Pipe Thread (DIN 228) Clear marking of the minimum WLL for all loading directions. Application-specific features Quick and easy installation with just one bolt connection. Other important RUD specific information and specialities to our RUD lifting points can be found on page 20 and in the specific user instruction ( Indication for the In accordance with the test principles of DGUV GS- OA-15-04, eyebolts with rigid eyes serve as mounting aids, e.g. on motors and gear units. There is a trade association clearance certificate available for using the high-strength RUD eyebolts. 116 RUD Ketten Rieger & Dietz GmbH u. Co. KG
2 MADE IN GEANY Eye bolt Eye nut Y Z For sideway loading use V respectively V For the actual WLL data of the please refer to the Working Load Limit chart on p.45. WLL WLL Z and : only vertical load allowed Lifting points ready for bolting 117
3 Lifting points ready for bolting metric thread metric fine thread pipe thread ISO Type WLL [t] weight [kg/pc.] T A B Eye bolt metric M M M M M M M M M M M M M M M M M M Eye bolt metric fine thread M M M M M M M M M M M M M M M M M M Eye bolt pipe thread ISO G 1/4" G 3/8" G 3/4" C 118 RUD Ketten Rieger & Dietz GmbH u. Co. KG
4 MADE IN GEANY D E M Ref. No M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M G 1/4" G 3/8" G 3/4" subject to technical modifications Lifting points ready for bolting 119
5 Lifting points ready for bolting UNC inch thread UNF inch fine thread BSW-Whitworth inch thread Type WLL [t] weight [kg/pc.] T A B Eye bolt UNC inch thread 1/4"-20UNC /16"-18UNC /8"-16UNC /16"-14UNC /2"-13UNC /16"-12UNC /8"-11UNC /4"-10UNC /8"-9UNC "-8UNC /8"-7UNC /8"-8UN /4"-7UNC /4"-8UN /8"-6UNC /2"-6UNC /4"-5UNC "-4.5UNC Eye bolt UNF inch fine thread 3/8"-24UNF /16"-20UNF /2"-20UNF /4"-16UNF "-12UNF Eye bolt BSW-Whitworth inch thread 1/4"-BSW /16"-BSW /8"-BSW /2"-BSW /8"-BSW /4"-BSW /8"-BSW "-BSW /8"-BSW /4"-BSW /2"-BSW /4"-BSW "-BSW C 120 RUD Ketten Rieger & Dietz GmbH u. Co. KG
6 MADE IN GEANY D E M Ref. No /4"-20UNC /16"-18UNC /8"-16UNC /16"-14UNC /2"-13UNC /16"-12UNC /8"-11UNC /4"-10UNC /8"-9UNC "-8UNC /8"-7UNC /8"-8UN /4"-7UNC /4"-8UN /8"-6UNC /2"-6UNC /4"-5UNC "-4.5UNC /8"-24UNF /16"-20UNF /2"-20UNF /4"-16UNF "-12UNF /4"-BSW /16"-BSW /8"-BSW /2"-BSW /8"-BSW /4"-BSW /8"-BSW "-BSW /8"-BSW /4"-BSW /2"-BSW /4"-BSW "-BSW subject to technical modifications Lifting points ready for bolting 121
7 Lifting points ready for bolting metric thread metric fine thread pipe thread ISO Type WLL [t] weight [kg/pc.] T A B Eye nut metric thread M M M M M M M M M M M M M M M M M Eye nut metric fine thread M M M M Eye nut pipe thread ISO G 1/4" G 1/2" G 3/4" C 122 RUD Ketten Rieger & Dietz GmbH u. Co. KG
8 MADE IN GEANY D E M Ref. No M M M M M M M M M M M M M M M M M M M M M G 1/4" G 1/2" G 3/4" subject to technical modifications Lifting points ready for bolting 123
9 Lifting points ready for bolting UNC inch thread BSW-Whitworth inch thread Type WLL [t] weight [kg/pc.] T A B Eye nut UNC inch thread 3/8"-16UNC /2"-13UNC /8"-11UNC /4"-10UNC /8"-9UNC "-8UNC /4"-7UNC Eye nut BSW-Whitworth inch thread 1/2"-BSW /8"-BSW /4"-BSW /8"-BSW "-BSW /8"-BSW C 124 RUD Ketten Rieger & Dietz GmbH u. Co. KG
10 MADE IN GEANY D E M Ref. No /8"-16UNC /2"-13UNC /8"-11UNC /4"-10UNC /8"-9UNC "-8UNC /4"-7UNC /2"-BSW /8"-BSW /4"-BSW /8"-BSW "-BSW /8"-BSW subject to technical modifications Lifting points ready for bolting 125
ICE-LBG-SR. ICE Load ring for bolting Super Rotation
HUMANES DE MADRID CP 28970 (MADRID) ICE Load ring for bolting Super Rotation 18 RUD Ketten Rieger & Dietz GmbH u. Co. KG MADE IN GERMANY ICE-bolt with revolutionary mechanical characteristics No loosening
More informationSOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
More informationICE-LBG-SR. Edition 02
ICE-LB-SR VLB Edition 02 EN CONTENTS Introduction ICE-LB-SR VLB LB-RS -ID-System Overview Lifting- and lashing points PSA Selection Chart product features WLL table lifting points for bolting Dimensioning
More informationLoad Ring for bolting >VLBG<
RUD-Art.-Nr.: 8500972-EN / 05.015 Load Ring for bolting >< EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More information>VLBG< Load Ring for bolting
RUD-Art.-Nr.: 8500972-EN / 03.013 Load Ring for bolting >< EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation
More informationUNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
More informationNOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More information> VIP-Balancer < VIP-Balancer. VIP-Balancer
RUD-Art.-Nr.: 7903591-EN / 06.017 > < EN User instruction This safety instruction / declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation of the original
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationBASIC STANDARDS. Core holes for tapping screws and bolts with tapping screw thread DIN Simple, most common tapping thread-joints.
ISO DIN : 797 Core holes for tapping screws and bolts with tapping screw thread DIN 7970 Guidelines for application The essential characteristic of tapping screw thread is its capability of forming chipless
More informationDLH ONLINE A GUIDE TO STANDARD EYE BOLTS, LIFTING POINTS AND HOIST RINGS FOR LIFTING PURPOSES. Benefits
DLH ONLINE A GUIDE TO STANDARD EYE BOLTS, LIFTING POINTS AND HOIST RINGS FOR LIFTING PURPOSES Benefits Safe use Types Applications Manufacturers Contact: Tel: 0845 270 2919 - INT: 00 44 161 223 1990 -
More informationTOOL MOVER TOOL MOVER HANDLE HEAVY OBJECTS SAFELY AND EASILY ENG EDITION_3. TOOL MOVER With attachments and Safety equipment. No standard.
ENG EDITION_3 TOOL MOVER HANDLE HEAVY OBJECTS SAFELY AND EASILY TOOL MOVER With attachments and Safety equipment. No standard. characteristics costs engineering Optional attachements Optional Safety equipment
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationLoad Ring for bolting >VLBG<
RUD-Art.-Nr.: 8500972-EN / 02.016 Load Ring for bolting >< EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More informationThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
More informationPRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Product Tensile Strength Property Class Diameter Size Range Length Evaluant Standard Psi Min N/mm Metric Inch* Metric Inch* IS ISO DIN BS ANSI JIS Hex Head Bolts/Screw 800/830 (8.8),0
More informationLoad Tables Lifting Points / Lifting Chains
Load Tables Lifting Points / Lifting Chains LIFTIN MEANS Lifting Points for bolting ICE-LB-SR / ICE Load ring for bolting thread size ICE-LB-SR 0.6 t M8 0.6 0.6 0.8 1.2 ICE-LB-SR 0.9 t M10 0.9 0.9 1.2
More informationSERVICE MANUAL. Coolant Level - Sight Glass. Air Cleaner Restriction Indicator
Maintenance 170907 Coolant Level - Sight Glass Daily Check The coolant level gauge is sighted on the rear of the vehicle. The coolant level should be checked when the engine is cold or after 15 minutes
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More informationIntroduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
More informationBolt-on Swivel Load Rings with Link - RUD VLBG with optional bolt lengths.
1 of 5 11/03/2015 11:15 (/) RUD "VLBG" Bolt-on Swivel Hoisting Rings, Rotating Swivel Eye Bolts. Metric & Imperial Thread - Range from 300kg to 20,000kg Model: RUD VLBG / BSLR-56 Quick Ref: BSLR-56 Bolt-on
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationINDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationThreadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
More informationLoad Ring for bolting >VLBG<
RUD-Art.-Nr.: 8500972-EN / 03.019 Load Ring for bolting >< EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation
More informationTOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS
PRICE LIST EFFECTIVE 04.02.2018 TOTEM HSS HAND / SHORT MACHINE / Forbes & Company Limited TOTEM HSS HIGH PERFORMANCE TAPS (AS PER IS - 6175 / 1977 BS 949 / 1976) SPIREX XL Bright Gold Xl Gold Size In MM
More information(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
More informationMATERIALS HANDLING TECHNICAL MANUAL VOL. 2
5 Beaver maintains a comprehensive range of rigging hardware items for the most rigorous working environment. Comprising of turnbuckles in all configurations, collared Eyebolts and eye nuts, chain split
More informationThreadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
More informationFULL COLOR TAB #6 TC 105
FULL COLOR TAB #6 TC 105 SERIES TC 2-STAGE TELESCOPING CYLINDER CONSTRUCTION FEATURES 3 Bore Sizes: 0.75, 1.50 and 2.50 Strokes up to 60 2-Stage Telescoping Space Saving Design 100% Double Action Heavy-Duty
More informationSTARPOINT. Safety instructions. Starpoint VRS (-F) Fax: Phone:
RUD-Art.-Nr.: 8500483-EN / 12.016 > STARPOINT < EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on Translation of the original instructions Starpoint (-F)
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
More informationMetrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
More informationYellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationRotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
More informationNIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
More informationLoad Ring for bolting >VLBG-PLUS<
Load Ring for bolting >VLBG-PLUS< Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. - Translation of the Original
More informationYellow Point WARNING NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. Catalog No YP. Copyright 2017 YOKE Industrial Corp. All Rights Reserved.
Yellow Point Catalog No. 8-2017.YP 2 3 Yellow Point 4 Worldwide Quality Type Approval And Certificate: 5 Quality Control, Testing, and Detecting during manufacturing YOKE runs a constant and strict production
More informationPLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
More informationProduct Catalogue Specialists in the Lifting Equipment and Non Destructive Testing Industry for Over 30 Years
Product Catalogue 2017 Specialists in the Lifting Equipment and Non Destructive Testing Industry for Over 30 Years Interactive Text Page Company Introduction Page 4 Green Pin Grade 6 G-4163 Safety Bow
More informationM/s Eiffel Building Material Trading L.L.C. Al Quos Dubai. M/s Golden Tools Trading Riyadh- Saudi Arabia. M/s New Chrome Fasteners Oman
We are please to introduce ourselves as the manufacturers of Threaded Rods Zinc Plated, Plain, Hot Dip Galvanized and Stainless Steel grade 04/6, Anchor bolts/foundation Bolts, Expansion bolts, U bolts,
More informationov-lifting_bolts_divider - Updated Lifting Bolts
ov-lifting_bolts_divider - Updated - 09-01-2017 Lifting Bolts Technical Information roduct information Lifting Bolts roduct marking Compliant with 2006/42/EC, and with individual date of manufacture and
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More informationAccuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
More informationBalfit Hydraulic Hose Fittings
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More informationConversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationTESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
More informationType TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread
Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection
More informationPiston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
More informationNUTS Melbourne Rectangular Stadium Project Konnect supplied a range of fasteners to this project
90 TILT-UP AND PRECAST PRODUCTS Inserts, Connectors, Anchors, Lift, Brace and Chemical Systems As a single-source provider for the Tilt-Up and Precast markets, Konnect by Dayton Superior offers professionally
More informationPiston Accumulators High pressure
Piston Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydraulic accumulators
More informationSize and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
More information>IVH< >VVH< Shortening hook
RUD-Art.-Nr.: 7902326-EN / 05.015 >IVH< >VVH< EN Assembly instruction This assembly instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. TRANSLATION
More informationAssembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationMGF Thread Milling Tools
MGF Thread Milling Tools Chamfering and hread milling righ from M2 Spiral flued solid carbide ools wih profile correcion and rear chamfer. Diameer range 2-20 mm This offers he following main advanages
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationTHREADED INSERTS.
www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationSpecifications F & A Landmatics
For applications where the part rotates and the threading tool is stationary For straight threading, large diameter, and tapered thread applications from #4 to 6-1/2 maximum oversize (3 to 165 mm) Self-opening,
More informationSix-point sockets. 1/4" Square Drive Sockets /8" Square Drive Sockets /2" Square Drive Sockets /4" Square Drive Sockets 18-21
1 Six-point sockets 1/4" Square Drive Sockets 08-09 3/8" Square Drive Sockets 10-11 1/2" Square Drive Sockets 12-17 3/4" Square Drive Sockets 18-21 1" Square Drive Sockets 22-26 1-1/2" Square Drive Sockets
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationEmerson Power Transmission P.O. Box 687 Maysville, KY Phone:
Torq/Gard Installation, Operation and Maintenance Instructions Emerson Power Transmission P.O. Box 687 Maysville, KY 41056 Phone: 606-564-2093 www.emerson-ept.com FORM 8322 Revised June 2007 Installation
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationMINI CATALOGUE inserts tool holders spares
MINI CATALOGUE inserts tool holders spares T O O L I N G F O R O I L & G A S A U T O M O T I V E A E R O S PA C E G E N E R A L E N G I N E E R I N G Established in Washington on the North East coast of
More informationTechnical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
More informationQuadThread. Internal. For Thread Turning
QuadThread Internal For Thread Turning Scandinavian Tool Systems Scandinavian Tools System AB Our business idea is to offer the best rigid threading system to our customer and be in the front line of cutting
More informationSERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationDouble Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationTENSIONERS SPEED SIMPLE LOAD TO USE ACCURATE TENSIONER OPERATION DAMAGE. torqlite.com HYDRAULIC TENSIONER INTRO
TENSIONERS HYDRAULIC TENSIONER INTRO SPEED SIMPLE TO USE ACCURATE LOAD TENSIONER OPERATION NO DAMAGE Hydraulic bolt tensioning provides a quick and easy method for tightening large diameter bolts to high
More informationCOARSE SIZE. Suitable for all high tensile applications. PITCH (mm)
QUICK PRDUCT SELECTIN GUIDE THREAD SIZE CMPARISIN PRDUCT SCKET HEAD CAP SCKET CUNTER SUNK HEAD SCKET BUTN HEAD CAP SCKET SET (KNURLED CUP PINT) SCKET HEAD SHULDER HARDNESS Hrc 39-44 Hrc 39-44 Hrc 39-44
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More information