ISO, SAE, DIN, JIS, BS, NF
|
|
- Lillian Morton
- 5 years ago
- Views:
Transcription
1 Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications typical of hyraulic pressure hose lines. Balflex optimize the prouction of these connectors an their compatibility with a wie range of hyraulic hoses, in orer to assure the highest performance an the most extensive range of applications. The Balfit hyraulic connectors program in this catalogue inclues the following stanar crimpe two-piece type (connector + ferrule) parts: Series 20 - Balfit ferrules for all types of crimpe Balfit connectors Series 23 - Balfit crimpe connectors for stanar 1 an 2 wire braie hyraulic hoses Series 24 - Balfit crimpe connectors for Balmaster multi-spiral hyraulic hoses Series 26 - Balfit crimpe interlocking connectors for Powerspir multi-spiral hyraulic hoses An overview of these parts is given in the following pages. The Balfit connectors parts coe is compose of three groups of igits: Ferrules - - series part type characterization hose ash size Fittings - - series hose ash size part type ash size Construction characteristics an imensions may be change at any time without prior notice. Balflex The European Technology Balflex 2010
2 Balflex HOSES vs FITTINGS Vs Fittings 3/16 1/4" 5/16 3/8 1/2" 5/8 3/4" 1 1.1/4 1.1/ Balflex Balflit Balflit Balflit Balflit Balflit Balflit Balflit Balflit Balflit Balflit Balflit R6 / 1TE TE R3 / 3TE R1T / 1SN R2T / 2SN R17 / 1SC SC R16/2SC R SP SH R R R (AMERICAN) (EUROPEAN) 2-MA JACK R7 TETILE R7 STEEL R PTFE ON Balflex The European Technology
3 Torque For each type of fitting a torque value that assures sealing without amaging the is recommene in table 2. Whenever a torque meter is not avaiable, follow the rule of thumb given for the fitting type. Table 2a: Recommene Torque for JIC Connectors Table 2b: Recommene Torque for BSP Connectors Torque (Nm) Torque (Nm) 7/16" /8" /2" /4" /16" /8" /8" /2" /4" /8" /8" /4" /16" " /16" /4" /16" /2" /8" " /8" /2" Table 2c: Recommene Torque for Metric Connectors Table 2: Recommene Torque for ORFS Connectors Torque (Nm) Torque (Nm) M12 x 1, /16" M14 x 1, /16" M16 x 1, /16" M18 x 1, " M20 x 1, /16" M22 x 1, /16" M24 x 1, /16" M26 x 1, /2" M30 x 2, M36 x 2, M42 x 2, M45 x 2, M52 x 2, Table 2e: Recommene Torque for Coe 61 Flange Table 2f: Recommene Torque for Coe 62 Flange Torque (Nm) Torque (Nm) 1/2" /2" /4" /4" " /4" /4" /2" /2" " " / Construction characteristics an imensions may be change at any time without prior notice. Balflex The European Technology Balflex 2010
4 Threa an s of Balfit Connectors Table 3a: Threa ash for JIC (37 flare) series 23 / 24 / P23 / P12 / P24 / P25 / 26 connectors Table 3b: Threa ash for NPT (ryseal taper) series 23 / 24 / P23 / P12 / P24 / P25 / 26 connectors Nominal Threa Threa ryseal Taper Threa Threa 3/16" - 3 7/16" /16" -3 1/8" /4" - 4 7/16" /16-3 1/4" /4" - 4 1/2" /4" -4 1/8" /4" - 4 9/16" /4" -4 1/4" /16" - 5 9/16" /16" -5 1/4" /8" - 6 9/16" /16" -5 3/8" /8" - 6 3/4" /8" -6 1/4" /32" /4" /8" -6 3/8" /2" - 8 3/4" /8" -6 1/2" /2" - 8 7/8" /32" /8" /8" -10 7/8" /32" /2" /8" /16" /2" -8 3/8" /4" -12 7/8" /2" -8 1/2" /4" /16" /8" -10 1/2" /4" /16" /8" -10 3/4" /8" /16" /4" -12 3/4" /8" /16" /8" -14 1" 11.1/2-16 1" /16" " / /4" /8" /4" /4" 11.1/ /2" /8" /2" /2" 11.1/2-24 2" /2" " -32 2" 11.1/2-32 Table 3c: Threa ash for SAE (45 flare) series 23 / 24 / P23 / P12 / P24 / P25 / 26 connectors Table 3: Threa ash for ORFS (O-Ring Face Seal) series 23 / 24 / P23 / P12 / P24 / P25 / 26 connectors Nominal Threa Threa ryseal Taper Threa Threa 1/4" -4 7/16" /4" - 4 9/16" /4" -4 1/2" /8" /16" /16" -5 5/8" /2" /16" /8" -6 5/8" /8" " /8" -6 3/4" /4" /16 12" /2" -8 3/4" " /16" /2" -8 7/8" /4" /16" /8" -10 7/8" /2" " /8" /16" /4" -12 7/8" /4" /16" Construction characteristics an imensions may be change at any time without prior notice. Balflex 2010 Balflex The European Technology
5 Threa an s of Balfit Connectors Table 3e: size for Coe 61 series 23 / 24 / P23 / P12 / P24 / 26 connectors Table 3f: size for Coe 62 series 23 / 24 / P23 / P12 / P24 / 26 connectors Nominal Flange Flange Nominal Flange Flange 1/2" ,16-8 1/2" ,75-8 3/4" , /4" , " , " , /4" , /4" , /2" , /2" , " , " ,37-32 Construction characteristics an imensions may be change at any time without prior notice. Balflex The European Technology Balflex 2010
6 Quick ientification of hyraulic connectors Metric Connections (ISO ) IN 8434, Metric, 24 cone JIC Connections (ISO ) ANSI, 37 flare L pipe S pipe s M10 x 1,0 9,0 10,0 4-7/16" 10,00 11,07 20 M12 x 1,5 10,5 12,0 6-1/2" 11,60 12,70 20 M14 x 1,5 12,5 14, /16" 13,00 14,25 18 M16 x 1,5 14,5 16, /8" 14,70 15,85 18 M18 x 1,5 16,5 18, /4" 17,60 19,00 16 M20 x 1,5 18,5 20,0-12 7/8" 20,50 22,17 14 M22 x 1,5 20,5 22, /16" 25,00 26,95 12 M24 x 1,5 22,5 24, /16" 25,30 26,95 14 M26 x 1,5 24,5 26, /16" 27,95 30,12 12 M30 x 2,0 28,0 30, /16" 31,30 33,30 12 M36 x 2,0 34,0 36, /8" 39,20 41,22 12 M42 x 2,0 40,0 42, /8" 45,60 47,57 12 M45 x 2,0 43,0 45, /2" 61,50 63,45 12 M52 x 2,0 50,0 52, s 5/8"-18 UNF an 1-1/16"-14 UNF are 45º flare BSP Connections (BS 5200) Whitworth, 60 cone NPT Connections (SAE J476) ANSI taper, 60 cone s s 1/8" 8,60 9, /8" 10, /4" 11,60 13, /4" 13, /8" 15,10 16, /8" 17, /2" 18,90 20, /2" 21, /8" 20,90 22, /4" 26, /4" 24,40 26, " 33, /2" 1" 30,60 33, /4" 42, /2" 1-1/4" 39,30 41, /2" 47, /2" 1-1/2" 45,10 47, " 59, /2" 2" 56,70 59,60 11 Construction characteristics an imensions may be change at any time without prior notice. Balflex 2010 Balflex The European Technology
7 Quick ientification of hyraulic connectors Japanese Metric Connections JIS B 8363, Metric, 60 cone Japanese Gas Connections JIS B 8363, Whitworth, 60 cone pitch s M14 x 1,5 12,50 14,00 1,5 1/8" 8,60 9,73 28 M16 x 1,5 14,50 16,00 1,5 1/4" 11,60 13,16 19 M18 x 1,5 16,50 18,00 1,5 3/8" 15,10 16,66 19 M22 x 1,5 20,50 22,00 1,5 1/2" 18,90 20,96 14 M24 x 1,5 22,50 24,00 1,5 5/8" 20,90 22,91 14 M30 x 1,5 28,50 30,00 1,5 3/4" 24,40 26,44 14 M33 x 1,5 31,50 33,00 1,5 1" 30,60 33,25 11 M42 x 1,5 40,50 42,00 1,5 1-1/4" 39,30 41, /2" 45,10 47, " 56,70 59,60 11 ORFS Connections (ISO ) ANSI, flat face (male with o-ring groove) Split Flanges (SAE J518) coe 61 (3000 PSI) & 62 (6000 PSI) s s N w w 9/16" 12,70 14,28 18 coe PSI coe PSI 11/16" 15,87 17, /2" 30,16 38,10 31,75 40,48 13/16" 19,05 20, /4" 38,10 47,62 41,27 50,80 1" 23,81 25, " 44,45 52,38 47,62 57,15 1.3/16" 27,78 30, /4" 50,80 58,73 53,97 66,67 1.7/16" 34,13 36, /2" 60,32 69,85 63,50 79, /16" 40,48 42, " 71,43 77,78 79,37 96,83 2" 48,41 50,80 12 Construction characteristics an imensions may be change at any time without prior notice. Balflex The European Technology Balflex 2010
8 Threa Coes coe NPT ORFS JIC / SAE UN / UNF METRIC BSP 02 1/8 27 1/ /4" 18 9/ / /4" /2" / / / / / /2" 14 13/ /4" 16 1/2" /8 14 M10 x 1,0 5/ /4" / /16 12 M12 x 1,5 3/4" /16 12 M14 x 1, /2 1.7/ /16 12 M16 x 1, M18 x 1, /4 11.1/2 1.11/ /8 12 M20 x 1,5 1.1/ M22 x 1, /2 11.1/ /8 12 M24 x 1,5 1.1/ M26 x 1,5 30 M30 x 2, /2 2.1/ M36 x 2,0 42 M42 x 2,0 45 M45 x 2,0 52 M52 x 2,0 Flange Coes flange coe flange 61 coe 3000 PSI flange 62 coe 6000 PSI 08 1/2" 30,2 mm 1/2" 31,7 mm 10 5/8 34,0 mm 12 3/4" 38,1 mm 3/4" 41,3 mm ,5 mm 1 47,6 mm /4 50,8 mm 1.1/4 54,0 mm /2 60,3 mm 1.1/2 63,5 mm ,4 mm 2 79,4 mm Construction characteristics an imensions may be change at any time without prior notice. Balflex 2010 Balflex The European Technology
Balfit Hydraulic Hose Fittings
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More informationGS-HYDRO INTERTRACO HOSES & CARBON STEEL COUPLINGS
GS-HYDRO INTERTRACO HOSES & CARBON STEEL COUPLINGS PRODUCT CATALOGUE INTERTRACO HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More information4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More informationEngineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
More informationGS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationINTRODUCTION OF KOMAN
H Y D R A U L I C INTRODUCTION OF KOMAN KOMAN HYDRAULIC 02 03 시대는변해도, 기업환경은달라도 NO.1 비즈니스파트너, Koman 입니다 코만은 1981년회사설립이래, 오랫동안축척된기술과신뢰를바탕으로, 정밀한품질관리체제에서유압용호스및호스피팅과어댑터를 SAE, DIN, JIC 및 JIS 등의국제규격을통해생산하고있으며,
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationAssembly Instructions-C70 Amphenol MMCX
Assembly Instructions-C70 Amphenol All parts of the connector are shown. Strip the inner conuctor, ielectric, an jacket as per RECOMMENDED CABLE STRIPPING DIM S in catalog. Slie the INSULATOR onto inner
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationLow-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
More informationPVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
More informationProduct Range Export April PVC-U piping systems for industrial application. Pipe, Fittings, Valves and Accessories
Prouct Range Export April 2006 PVC-U piping systems for inustrial application Pipe, Fittings, Valves an Accessories 40 Years of Application Know ow Approvals PVC-U ebensmittelzulassung lebensmittelecht
More informationSection 5. SYGEF Standard PVDF Piping System. Effective Jan. 16, See for updated info. P
Section 5 SYGEF Stanar PVF Piping System P0801084 Effective Jan. 16, 2012. See www.gfpiping.com for upate info. SYGEF Stanar Prouct Specification Material Color ensity Surface tension inear expansion coefficient
More informationPRODUCTS FOR THE HYDRAULICS INDUSTRY
PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be
More informationThreadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
More informationThermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
More informationFAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
More informationCAST STEEL FLOATING BALL VALVE
CAST STEEL FLOATING BALL VALVE Stanar an Prouct Range Technical Innovation Design an Inspection Stanar: Pressure-Temperature Ratings Shell Wall Thickness Flange Face-to-face Dimensions Socket Wel & NPT
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationTension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationWelcome to JDM Industrial Maintenance Inc.
Welcome to JDM Industrial Maintenance Inc. We are an experienced and innovative company which has been serving the City of Peterborough and the surrounding areas since 98. Our diverse skills and resources
More informationK-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
More informationThreadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
More informationPoly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
More informationHigh Temperature Masking
Hig Temperature Masking Silicone Caps an Plugs (+300ºC) 92-96 Flexible PVC Caps an Plugs (+220ºC) 97-98 Paper Caps an Plugs (+205ºC) 99 EPM an TPR Caps an Plugs (+180ºC) 100-105 Masking Tapes, Hooks an
More informationTechnical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More information43 THERMOPLASTIC EN 855 R8 / SAE 100R8 TWIN High pressure single aramidic braid -
Balflex Hose Index Description Pages General Safety Guidelines 4 to 7 General Guidelines/Cross Reference /Conversion Factors 8 to 14 DIN 1TE / SAE 100R6 DIN 2TE 15 DIN EN 854 3TE / SAE 100R3 16 SAE 100R4
More informationA PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
More informationCarbon or stainless Steel
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 6 FLEXIBLE HOSES TYPE FSH SERIES METALLIC
More informationHOSES HOSES INFORMATION GENERAL. GS Hose Components, medium press Working pressure, Type Approvals 345 High Pressure Hoses: P1T, EN 853/G1
GENERAL HYDRAULIC PIPES 10-40 AR SAE 50 AR SAE 3000 PSI DIN 350-400 AR SCHEDULE SERIE SAE 3000 PSI Product Page Working pressure, Type Approvals 345 High Pressure s: P1T, EN 853/G1 348 C1TH, EN 853/G2
More informationHOW TO SPECIFY PIRTEK HOSE TAILS
HOW TO SPECIFY PIRTEK HOSE TAILS Hose Tail Part Number C629L-2016X Tail Series / Dash Size stamped on 1-piece crimp fittings Configuration Angle Type - Fitting Size Hose Size Series C62 9 L - 20 16 X End
More informationNOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
More informationDN crimping diameter (guide values) [mm] 2 7,0 4 9,9
ØD hose hose PN pricked* ød part no. 2 400 bar yes 5 9-946-02-00-012 2 630 bar - 5 9-946-02-00-020 2 630 bar yes 5 9-946-02-01-020 4 550 bar yes 8 9-946-04-00-010 *for inert gases technical data of the
More informationFlat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationTube cleaning. Chapter C. Hose 2240D High pressure tube cleaning hose... C-2
C Table of contents Chapter C Hose 2240D High pressure tube cleaning hose... C-2 Related fittings 106TX JIC female swivel... C-3 1YTX Type M female swivel... C-3 1C9X Metric female swivel heavy series
More informationBimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
More informationUNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO -724-1976 (E) Gauging Practice :- IS - 2334-1975 : ISO -1502-1978 (E) CLASS OF FIT : Screw Plugs :6H(Medium.)
More informationO BRIEN BRASS COMPANY
O BRIEN BRASS COMPANY Table of Contents Quality................................2 Threads...............................3 Hose & Coupling Compatibility.............4 SAE 100R1, SAE 100R2...................5
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 382 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationHose, Tubes & Ducting. Hose, Tubes & Ducting
Hose, Tubes & Ducting 392 Together, we can kick out the cost of contamination 80% of all hydraulic failures are caused by poor maintenance and contamination. So let s put a stop to it today! Partner with
More informationHV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationQUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationKOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
More informationProduct Range. Butterfly Valve Type 567
Prouct Range Butterfly Valve Type 567 Butterfly valves SYGEF SYGEF stanar Butterfly valve type 567 PVF Bare shaft Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationTechnical Information
Technical Information Materials ISO- Code Material Colour Operating Temperature PA Polyamide Light grey PP PP-EL natural PP PVDF PVDF-EL PFA PTFE PTFE-EL PEEK Polypropylene Polypropylene Polypropylene
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationStandard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2
Stanar Quick-Disconnect Coupings Series ES one-way shut-off Materias a PN 35 bar -20 C +100 C air a.o. 7,2 ISO 228/DIN 2999/DIN 13 1100 L/min yes 1-way Eur. Stanar wor-wie 10 Coupings with mae threa Threa
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationSTAUFF. Klemmringverschraubungen Twin Ferrule Compression Fittings. Local solutions for individual customers worldwide
STAUFF Klemmringverschraubungen Twin Ferrule Compression Fittings Local solutions for iniviual customers worlwie INDEX UNION SU Union SRU Reucing Union SBHRU Bulkhea Reucing Union SBHU Bulkhea Union CONNECTORS
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationAVAILABLE IN CARBON AND STAINLESS STEEL
Prodotto in ACCIAIO AL CARBONIO e in ACCIAIO INOssidabile AVAILABLE IN CARBON AND STAINLESS STEEL 80 261 ORIGINS OF THE PRESS FITTING To fully understand the innovative content of the new Series C4 it
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationWYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S
Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless
More informationASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
More informationQuick Release Couplings & Live Swivel Joints
hardy spicer HOSE FITTINGS DRIVESHAFTS Quick Release Couplings & Live Swivel Joints, 17-1 Discovery Road, Dandenong South, Victoria, 175 Toll free Ph: 100 04 67 DISCLAIMER Disclaimer The information and
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationSECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationManifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationProduct features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
More informationHIGH PRESSURE - hydraulic cylinders
SSU - hyraulic cyliners A, type aterial: rotective coating: eium: ax. piston spee : ax. working press.: Carb. steel an cast iron (hea) U,, O, T rimer (option), chromiumplate yraulic oil 0.5 m/s 200 From
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS PF2000 Series Fixed Displacement s Also refer to "Checkball Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett
More informationEQUIPMENT & ACCESSORIES
0011 O-RING BOSS REPLACEMENT RINGS 00026 BSP O-RINGS FOR RECESSED PORT ADAPTERS Part Number O-Ring ID Wall Dia 0011-02 0.239" 0064" 0011-03 0.301" 0064" 0011-04 0.351" 0072" 0011-05 0.414" 0072" 0011-06
More informationMS02-MSE02 HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
MS02-MSE02 HYRAULIC MOTORS T E C H N I C A L C A T A L O G OCLAIN HYRAULICS INTROUCTION Given their optimized and modular design capable of delivering high performance, motors from the MS Classic range
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationTable of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS PF4200 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationPipe and Flange Protection
Pipe an Flange Protection Pipe Caps 78-82 Pipe Plugs 82-83 Flange Protection 84-89 77 Protect! Pipe an Flange Protection Moss offer a wie range of Plastic Protection Proucts for pipes an flanges. Our range
More informationThrottle Modules / Throttle and Check Modules
FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationBehringer Ball Valve Ordering Code
Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)
More informationTap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
More informationF3.00 Paddlewheel Flow Sensor INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description..
INSTRUCTION MANUAL EN 10-11 Table of Contents 1. Introuction 2 1.1. Safety Instructions.. 2 1.2. Unpacking. 2 2. Description.. 3 2.1. Design.... 3 2.2. Technical Features.. 3 2.3. Operating Principle...
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationHydraulic Hose & Coupling Mini-Catalog
Hydraulic Hose & Coupling Mini-Catalog The System Flextral offers a diversified line of SAE and ISO compliant hose and fitting products. Our extensive distributor network ensures product availability and
More informationInline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
More informationMS02 - MSE02 HYDRAULIC MOTORS
MS02 - MSE02 HYRAULIC MOTORS T E C H N I C A L C A T A L O G Hydraulic motors MS02 - MSE02 new generation OCLAIN HYRAULICS CHARACTERISTICS Motor inertia Noise emissions = 0.01 kg.m² = 60 dba Theoretical
More information