n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars

Size: px

Start display at page:

Download "n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars"

Cameron Barber
6 years ago
Views:

www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p.

1 moduar distribution bocks 40 to 0 moduar distribution bocks 40 to Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues (p. 370) Sef-extinguishing, according to EN : 960 C on active part supports Pack Cat.Nos Monoboc moduar distribution bocks Mounting on rai 4 or on pate with 2 screws Suppied with insuated back pate and transparent protective front cover Each bar can be abeed using CB 3 Possibe to add IP 2X termina bock (except Cat.No ) oube poe Equipped with 2 bars Isc Rating peak Icw Number () (kâ) (k) of modues Four poe Equipped with 4 bars (1) (2) (1) Moduar distribution bocks Mounting on rai 4 Fitted with Lexic abe hoder Can be joined together Possibiity of forming a four poe distribution bock by adding modues Singe poe Rating Isc peak Number () (kâ) of modues istribution terminas outputs mm 2 fexibe - Isc peak 30 kâ Can be fitted directy onto downstream termina of PX 1/160, Vistop 100/160 and X H outputs 35 mm 2 fexibe and 2 outputs mm 2 fexibe - Isc peak 36 kâ Can be fitted directy onto downstream termina of PX 0/0 ER and PX-IS 0 n Section for connecting rigid or fexibe conductors (with Starfix ferrues) istribution Bocks Connections per bar Rigid conductors Fexibe conductors with ferrues Cat.Nos Number Ø Section Section Starfix ferrues (mm 2 ) (mm 2 ) Cat.Nos to to to to to to to to to to to to to to to to to to to to to to to to to 6 to to 70/ to to to to 16 4 to /68/ to to to to 6 to to 70/ to to /72/ to to to to 10 6 to /69/ to 10 to / to 35 to to 77/ to to to to 6 to to 70/ to to to to 16 4 to /68/ to to to to 6 to to 70/ to to / to to to to 35 6 to to to to / to to to to 6 to to 70/ to to / to to to to 6 to to 70/ to 35 6 to to 70/ to to to to to to 6 to to 70/ to to to to to to 72/ to to PX MCCBs (from p. 74 to 103) Vistop isoating switches (p. 108) X MCBs (p. 1 to 153) (1) With short ferrue suppied for fexibe connection mm 2 (2) Incoming conductors must be equiped with ferrues (p. 370) Connection: mm 2 witth ferrues without insuating fange Red cataogue numbers : New products 1

2 moduar distribution bocks 40 to 0 (continued) Conform to EN Insuating votage according to EN / IEC : 500 V Impuse votage (Uimp): 8 kv - egree of poution: 3 Use in C: without derating Sef-extinguishing 960 C on active parts supports n Moduar distribution bocks Singe poe , Cat.Nos /83/ n Monoboc moduar distribution bocks oube poe , Cat.Nos /80/ w 50 Four poe , Cat.Nos /84/86/ Cat.Nos Width Connection Torque 3.5 Nm 10 Nm 36 Torque 3.5 Nm 36 Torque 24 Nm w 50 Four poe 1 Cat.No Cat.No n istribution terminas, Cat.Nos / Cat.No Cat.No Ø 10 W Four poe 160, Cat.No w 50 Four poe 0, Cat.No Sef-extinguishing 960 C according to EN W n Use of IP 2X termina bocks (p. 0) Moduar IP 2X erating distribution Termina bocks bocks Votage Rating (1) 400 V (1) 400 V (1) 400 V (2) 400 V (2) 400 V (2) 400 V (2) 400 V (2) 400 V (2) 400 V 100 (1) T (2) Neutra

www.kinkmann.com power distribution bocks power distribution bocks n Extra-fat for ugs Sef extinguishing: 960 C according to EN 60695-2-11 1 Cat.

Nos Extra-fat for ugs 1 1 374 47 Fixing on rai EN 60715 4 or on pate with M6 screws.

3 power distribution bocks power distribution bocks n Extra-fat for ugs Sef extinguishing: 960 C according to EN Cat.No Isc peak kâ Insuating votage according to EN / IEC : 500 V Standard distribution Suppied with screen protection Pack Cat.Nos Extra-fat for ugs Fixing on rai EN or on pate with M6 screws. Equipped with: - 1 incoming 35 mm 2 (possibe tapp-off) - 10 phase outgoing 16 mm 2 - M5 screws - 17 neutra outgoing 16 mm 2 - M5 screws Connection possibe using connector Cat.No (p. 206) Fixing on pain pate or on pate with M6 screws istribution bock 1 incoming 150 mm 2 per poe: - 1 poe is composed of 3 parts - Each part can receive: 1 x 70 mm 2 or 1 x 50 mm 2 and 1 x 35 mm 2, or 2 x 35 mm 2 or 1 connector with 3 outgoing terminas Cat.No (p. 4) Stepped for ugs Fixing on rai EN depth 15 mm or on pate with screws Ø4 mm (by removing caws) 4 bars 12 x 4 mm with five connectors 2 x 10 mm 2 /bar (not mounted) Fixing on rai EN , with caws Cat.No (p. 297) or on pate with M6 screws 4 bars 15 x 4 mm suppied with: - 1 incoming 35 mm 2 - M8 screws - 5 outgoing mm 2 - M6 screws Fixing on rai EN , with caws Cat.No (p. 297) or on pate with M6 screws 4 bars 18 x 4 mm suppied with: - 1 incoming 70 mm 2 max. - M8 screws - 5 outgoing 35 mm 2 - M6 screws Fixing on rai EN , with caws Cat.No (p. 297) or on pate with M6 screws 4 bars x 4 mm suppied with: - 1 incoming 120 mm 2 - M10 screws - 5 outgoing 50 mm 2 - M8 screws Horizonta mounting in XL cabinets, vertica in XL cabe seeve, vertica in XL interna cabe seeve or on soid pate using the M6 screws suppied istribution bock consisting of 4 tin-coated bars 32 x 5 mm with insuated protection Composition of each bar: - 2 x Ø 8.5 mm untapped hoes for power suppy (fexibe bars, ) - 21 outgoing M6 hoes (70 mm 2 ugs max.) Fixing on rai EN , with caws Cat.No (p. 297) istribution bock consisting of 4 bars 32 x 5 mm Composition of each bar: - 2 x Ø 10.5 mm untapped hoes for power suppy (185 mm 2 max.) - 15 outgoing M6 hoes, 4 outgoing M8 hoes N N Cat.No Isc peak 60 kâ Insuating votage according to EN / IEC : 1000 V B M8 connection width 35 mm M6 connection width 35 mm n Stepped for ugs 1 Cat.No Isc peak 20 kâ Insuating votage according to EN / IEC : 600 V Sef extinguishing: 850 C according to EN /160/0 Cat.Nos /31/35 - Isc peak 35 kâ Insuating votage according to EN / IEC : 1000 V Sef extinguishing: 850 C according to EN Uimp: 12 kv, degree of poution: 3 I J 400 (1) Cat.No Isc peak 42 kâ. Insuating votage according to EN / IEC : 1000 V. Uimp: 12 kv, degree of poution: 3 Sef extinguishing: 960 C according to EN Cat.No Isc peak 50/75 kâ. Insuating votage according to EN / IEC : 1000 V fixing centres 50 mm,1500 V fixing centres 75 mm. Uimp: 8 kv fixing centres 50 mm, 12 kv fixing centres 75 mm. egree of poution: Cat.No (1) Horizonta mounting with minimum facepates height 300 mm H C G E F imensions istribution bocks B C E F G H I J

4 connection connection n Connectors Cat.No Cat.No Ø Ø on copper bar "Standard" distribution Pack Cat.Nos Connectors With 3 outgoing terminas Fits onto fat copper bars and distribution bock Cat.No (p. 3) Capacity: - 1 x Ø5.3 mm outgoing termina for 1.5 to 6 mm 2 connection - 2 x Ø7.5 mm outgoing terminas for 6 to 16 mm 2 connection With 7 outgoing terminas Fits onto fat copper bars Capacity: - 4 x Ø5.3 mm outgoing terminas for 1.5 to 6 mm 2 connection - 3 x Ø7.5 mm outgoing terminas for 6 to 16 mm 2 connection uminium/copper distribution boxes up to 300 mm 2 dapt the cross-section of the incoming or outgoing cabe in order to connect a device IP 2X box, sef-extinguishing transparent cover Universa fixing on 4 rai or on pate Reversibe seaabe cover with area for abe Operationa votage: Ue = 690 V± according to EN /IEC uminium connection Conform to standard NFC cass B Copper connection Conform to standard EN Suppied with copper couping strip uminium/copper 120 mm 2 distribution box 300 max. Incoming: 16 to 120 mm 2 uminium or 16 to 120 mm 2 copper Outgoing: 16 to 70 mm 2 copper uminium/copper 300 mm 2 distribution box 540 max. Incoming: 70 to 300 mm 2 uminium or 70 to 185 mm 2 copper Outgoing: 70 to 150 mm 2 copper n uminium/copper distribution boxes Technica characteristics Cat.No Cat.No Impuse votage (Uimp) 10 kv 12 kv Short-circuit current Icw for 1 second 14.5 k 22.2 k Tightening torque 14 Nm 30 Nm imensions Cat.No Cat.No Connection Junction I/Cu Cu 152 I/Cu Cu I/Cu istribution I/Cu Connecting in series This bridging is made with 2 copper bars (suppied with each product) and accept max. rating of incoming cabe for tap-off between 2 distributions boards 1 66 Cu Junction boxes IP 30 - IK 07 For copper cabes 4 connections per poe Reversibe stirrup for zero camping Fitted with 4 or 5 junction bocks mounted on an insuated strip with a sheet stee cover Knock-out entries for conduits Ø9 and 21 mm Seaabe cover screws RL 7032 Cabe section Rated current Poes (mm 2 ) () n Junction boxes Ø G F 45 E C Cat.Nos C E F G

5 busbars supports seection standard distribution Max. In () Supports Fat copper bars C-section auminium bars Mounting / / XL Vertica at back of cabinet or encosure Vertica at back of cabe seeve XL Vertica at back of cabinet or encosure Vertica at back of interna cabe seeve Vertica at back of externa cabe seeve Main horizonta at top or at bottom of cabinet : 475 : 7 : 975 XL (5) (5) (5) (6) (5) (1) (1)(7) (7) Horizonta transfer : 7 : 975 (4+5) (5) (1) W W Vertica atera inside cabe seeve Vertica atera inside cabinet behind upright Vertica at back of cabinet Horizonta at back of cabinet : 475 : 7 : 975 : 7 : 975 W : 475 W : 7 W : 975 W : 475 W : 7 W : (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (3) (3) (3) (3) (3) (3) (1) With upright Cat.No in cabe seeve (2) epth min. 7 mm (3) Fixed supports ony (4) Inside compementary cabe seeve (5) Partia chassis (6) With crosspieces Cat.No (7) With crosspieces Cat.No Red cataogue numbers : New products 5

6 fat copper bars seection standard distribution Fat busbars supports Cat.No Cat.No Cat.No Cat.No Fat copper bars Cat.Nos Cross Section Number of bar per poe I () I () I () I () IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > x x x x x x x x x x x x x 10 6

www.kinkmann.com bar mounting: edgewise 1600 4000 réf. 373 22/23 réf.

- - - - - 700 630 430 350 700 630 500 420 1150 1000 650 510 1180 1020 750 630 - - - - 1600 1380 1000 900 - - - - 2020 1720 1120 1000 800 700 500 400 800 700 600 500 1350 1150 770 590 1380 1180 750

7 bar mounting: edgewise réf /23 réf / bar mounting: bar mounting: fa t edgewise bar mounting: f a t I () I () I () I () IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > 30 IP 30 IP > <<< ISTRIBUTION SYSTEM Be free to choose your distribution system Soutions up to Fat copper busbars C-section auminium busbars Isoating supports and fat copper busbars, for standard distribution up to Isoating supports and C-section auminium busbars, for standard distribution up to (with 2 bars per poe) Possibe mounting: vertica or horizonta, inside cabinets, encosures or cabe seeves Perfect integration into XL 3 cabinets thanks to compete range of accessories These products are part of distribution systems > See p

8 isoating supports for busbars XL³ cabinets and encosures Mounting (p. 260 to 263) "Standard" distribution Pack Cat.Nos 1 bar per poe universa supports Singe poe support for fat copper bars 12 x 2 or 14 x 4 mm Singe poe support for fat copper bars 15 x 4, 18 x 4 or x 4 mm Set of 2 four poe supports for fat copper bars 12 x 2 or 12 x 4 mm Set of 2 four poe supports for fat copper bars 15 x 4 or 18 x 4 mm Set of 2 four poe supports for fat copper bars x 4 mm 1 bar per poe Support for fat copper bars 18 x 4, x 5 and 32 x 5 mm For XL cabinets and encosures Support for fat copper bars 18 x 4, x 4, x 5 and 32 x 5 mm, in soping position to create a vertica busbars at back For direct mounting on soid or perforated pate Support for fat copper bars 18 x 4, x 5, 32 x 5, 50 x 5 and 63 x 5 mm in soping position Support for fat copper bars 50 x 5, 63 x 5, 75 x 5 and 80 x 5 mm in staggered position Pack Cat.Nos 1 or 2 bars per poe Supports for fat copper bars 50 x 5, 63 x 5, 75 x 5, 80 x 5 and 100 x 5 mm, in aigned position Fixed support dditiona support Mounted in addition to fixed support Cat.No to compy with the distances (Isc withstand) 1 to 4 bars per poe Supports for 4 fat bars from 50 x 5 to 1 x 5 mm or 3 bars from 50 x 10 to 120 x 10 mm, in aigned position Fixed support dditiona support Mounted in addition to fixed support Cat.No to compy with the distances (Isc withstand) Fixing supports djustabe crosspieces Set of 2 crosspieces ength 350 mm Set of 2 crosspieces ength 600 mm Set of 2 crosspieces ength 850 mm Crosspieces for partia chassis Set of 2 fixed crosspieces ength 350 mm Set of 2 fixed crosspieces ength 600 mm Extension piece For mounting busbars supports Cat.No in XL and 4000 cabinets and encosures These products are part of protection and distribution systems > See p

9 copper bars and accessories isoating supports for c-section busbars XL³ cabinets and encosures Standard distribution Mounting (p. 260 to 263) Pack Cat.Nos Copper bars Rigid, fat, threaded hoes Cross I permissibe() Hoes Length section IP 30 IP >30 Ø mm x M x M x M x M x M x M x M Rigid fat cear hoes Cross I permissibe() Hoes Length section IP 30 IP > 30 Ø mm x x x x x Fexibe Suppied fat, ength 2 m Cross I () section IP 30 IP > x x x x x x ccessories Isoating profie 1/ Isoating profie for fat copper bars 18 x 4, x 4, x 5 and 32 x 5 mm, ength 1 m Suppied with fixing cips Insuating screws M6 x 10 HF screws with contact washe M6 x Ø 8, Standard distribution Pack Cat.Nos Supports from 630 to 1600 Support for a C-section auminium bars For encosures configurations possibe in XL encosures: - Vertica at the back of the encosure - Side-mounted vertica behind upright - Top horizonta - Horizonta transfer For encosures depth 7 mm or 475 mm in partia chassis For encosures depth 975 mm The support can be doubed for a current of 3200 For cabe seeves For mounting in cabe seeves in staggered position: - Side mounted atera For cabe seeves depth 7 mm or 475 mm For cabe seeves depth 975 mm The support can be doubed (externa cabe seeves ony) for a current of 3200 C-section auminium bars Length 1780 mm Cross I () section (mm 2 ) IP 30 IP > Connection pates For connecting C-section bars to extend a busbars or to connect vertica bars to horizonta bars bar per phase bars per phase ccessories M10 hammer head bot For joining supports Cat.Nos and to create busbars up to 3200 Bod pack quantities : Minimum quantities to be ordered. Red cataogue numbers : New products These products are part of protection and distribution systems > See p

10 isoating supports for busbars n Peak current Ipk The distance between the busbar supports depends on the eectrodynamic forces generated when there is a short-circuit, these being directy proportiona to the peak vaue of the short-circuit current (Ipk) Two methods can be used to determine the peak current vaue according to data that is generay avaiabe: Using the imiting capacity of the protective devices The imitation curves of the protective devices (X and PX) give the imited peak current according to the prospective short-circuit current The "Non-imited peak Isc" curve corresponds to no protection The tabe opposite gives the imited peak vaue (Ipk) for a maximum prospective short-circuit vaue equa to the breaking capacity (Icu) of the device. For ower prospective short-circuit vaues, reading the curves wi provide an optimised vaue Rating Isc peak Max. () (kâ) PX PX PX PX PX to PX 0 ER 100 to 0 22 PX 0 27 PX-H 0 34 PX PX-H PX PX-H Isc peak Isc imited peak Isc non-imited peak prospective Isc Isc RMS. The peak vaue is much higher if there are no imiting protective devices. This vaue is cacuated by appying a coefficient of asymmetry (n) to the prospective rms vaue shown in the tabe opposite Isc prospective RMS (k) n < I < I < I < I 2.2 n etermining the distances between the supports E Maximum distances "" E adjustabe Supports Bars (12 x 2) or (12 x 4) (15 x 4) or (18 x 4) or ( x 4) E Isc peak (Ipk in kâ) Maximum distances "" E fixed Supports / Bars (12 x 2) (12 x 4) (15 x 4) ( x 4) (18 x 4) ( x 4) ( x 5) (32 x 5) (18 x 4) ( x 5) (32 x 5) (18 x 4) Isc peak (Ipk in kâ)

11 isoating supports for busbars n etermining the distances between the supports (continued) Maximum distances "" - E fixed: 75 mm Supports fat bar per poe 1 fat bar per poe Bars (18 x 4) ( x 5) (32 x 5) (50 x 5) (63 x 5) (50 x 5) (63 x 5) (75 x 5) (80 x 5) Isc peak (Ipk in kâ) Maximum distances "" - E fixed: 75 mm Supports , fat bar per poe 2 bars per poe Bars (50 x 5) (63 x 5) (75 x 5) (80 x 5) (100 x 5) (50 x 5) (63 x 5) (75 x 5) (80 x 5) (100 x 5) Isc peak (Ipk in kâ) dditiona support: Horizonta busbars (1) Mounted in addition: - to 2 fixed supports in encosure width 7 et to fixed support in cabe seeves width 475 Vertica busbars Mounted in addition to 3 fixed supports if necessary (1) In case of fat bar mounting, use fixed support ony Maximum distances "" Supports / /69 1 C-section auminium bar per poe 1 C-section auminium bar per poe Bars Isc peak (Ipk in kâ)

12 isoating supports for busbars (continued) Maximum distances "" with bars thick 5 mm - E fixed: 1 mm Supports , bar per poe 2 bars per poe 3 bars per poe 4 bars per poe Bars 50 x 5 63 x 5 75 x x 5 1 x 5 50 x 5 63 x 5 75 x x 5 1 x 5 50 x 5 63 x 5 75 x x 5 1 x 5 50 x 5 63 x 5 75 x x 5 1 x 5 80 x 5 80 x 5 80 x 5 80 x 5 Isc peak (Ipk in kâ) Maximum distances "" with bars thick 10 mm - E fixed: 1 mm Supports , 373 Bars 1 bar per poe 2 bars per poe 3 bars per poe 80 x x x x x x x x x 10 Isc peak (Ipk in kâ) dditiona support: Horizonta busbars (1) Mounted in addition: - to 2 fixed supports in encosure width 7 et to fixed support in cabe seeves width 475 Vertica busbars Mounted in addition to 3 fixed supports if necessary (1) In case of fat bar mounting, use fixed support ony n Insuating characteristics EN /IEC (degree of poution: 3) Cat.Nos / / / /67/68/69 Ui (V) Uimp (kv)

13 isoating supports for busbars (continued) n imensions Cat.No Side for 12 x 2 mm bar View from above Cat.No Cat.No Cat.No Side for 12 x 4 mm bar Ø Ø = = 42 = = Cat.No Cat.No Cat.No Cat.No Cat.No fixing centre fixing centre 3 im. Copper bar 50 x 5 63 x 5 75 x 5 80 x Cat.No (fixed support) Cat.No (additiona support) fixing centre 3 B B Copper bar im. 50 x 5 63 x 5 75 x 5 80 x 5 100x B Cat.No (fixed support) min. 567 / max B Cat.No 373 (additiona support) Bars thick 5 or 10 mm Cat.Nos im h75 h80 h100 h120 h B 187,5 192,5 215,5 232,5 237, Cat.No /68 Cat.No /69 35 B C E F F E Ø B C Ø 6.5 Cat.Nos B C E F E F F E 263

SELECT your. distribution SySTEm GLOBAL SPECIALIST FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

SELECT your. distribution SySTEm GLOBAL SPECIALIST FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES SELECT your distribution SySTEm GLOBAL SPECIALIST FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES Distribution is an essentia function for the eectrica panes, as we as for contro and circuit protection.