Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas

Size: px
Start display at page:

Download "Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas"

Transcription

1 Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface spraying Water treatment and many others Fu cone nozzes

2 Fu cone nozzes Axiafow fu cone nozzes Lecher fu cone nozzes have an extraordinariy uniform iquid distribution over the whoe circuar impact area The high precision of distribution is achieved by orienting the iquid inet to the centre of the swir chamber of the nozze The optimized xstye swir insert ensures a high operating safety due to its arge free crosssections Axiafow fu cone nozzes are avaiabe with different spray anges and in may fow rates Therefore, matching to specific service conditions is possibe without any difficuties xtremey uniform iquid distribution Wide fow rate range Large number of avaiabe spray anges Specia design for fire fighting: efectorpate nozze Tangentia fow fu cone nozzes Tangentiafow fu cone nozzes are, for instance, particuary suited for cosedcircuit spraying of iquids with a high quota of soid matter, or for fire fighting appications The atomizing fuid is tangentiay suppied to a swir chamber, where it is put into rotation Tangentiafow fu cone nozzes are free of swir inserts ence, they are not at a prone to cogging The fu cone spray is obtained with the aid of speciay arranged grooves, mied into the nozze bottom, which cause an adequate part of the rotating iquid fow to diverge to the center of the swir chamber Thereby, an extremey uniform area distribution of the sprayed iquid is achieved Reiabe in service Noncogging Stabe spray anges, un affected by transient pressures Typica iquid distribution chart Custer ead Nozzes Lecher custer head nozzes achieve a very arge surface of the sprayed iquid by adding various finey atomizing singe nozzes Whenever a fine fogike fu cone atomization with reativey arge fow rates is necessary, eg gas exchange processes, steam cooing or dust suppression, Lecher custer head nozzes have decisive advantages: overapping hoow cones form a fine fu cone atomization with an increased dropet surface area These very fine dropets cannot be achieved by a singeorifice spray nozze of the same fow rate size The increased dropet surface area of the atomized iquid provides great efficiency in gas treatment and cooing appications Cumuated voume distribution Number distribution 32

3 Fu cone nozzes Axiafow Series V [/min] Connection Appication/ Page fu cone nozzes at p = 2 bar esign /8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPP 1 SPP Ceaning and washing processes, surface spraying, Container ceaning, foam precipitation, degassing of iquids Noncogging nozze design /8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPP 1 SPP Ceaning and washing process, cooing of gaseous fuids and soids, surface spraying, spraying onto mats in air washers, improving on chemica reactions Large free crosssections, due to optimized xstye swir insert /4 SPP 1 1/2 SPP 2 SPP Surface spraying, spraying over packings, ceaning and washing process, chemica process engineering, cooing of gaseous fuids and soids, water treatment Uniform fu cone spray /2 SPP 3 SPP 3 1/2 SPP 4 SPP Surface spraying, spraying over packings, ceaning and washing process, chemica process engineering, cooing of gaseous fuids and soids, water treatment Uniform fu cone spray Assemby with 3/8" retaining nut Surface spraying, spraying over packings, chemica process engineering, ceaning and washing processes, cooing of gaseous fuids and soids Uniform fu cone spray

4 Fu cone nozzes Tangentiafow Series V [/min] Connection Appication/ Page fu cone nozzes at p = 2 bar esign /4 SPT 3/8 SPT 1/2 SPT 3/4 SPT 1 SPT Ceaning and washing process, cooing of gaseous fuids and soids, surface spraying, spraying onto mats in air washers, improving on chemica reactions, continuous casting Without swir inserts, noncogging ayonet quickreease system Assemby with bayonet quickreease system Ceaning probems, cooing process, foam contro Quick and safe assemby, without toos Spacesaving instaation 314 Custer head nozzes Series V [/min] Connection Appication/ Page at p = 2 bar esign /2 SPP 3/4 SPP Cooing of gaseous and soid materia, desuperheating, chorine precipitation, absorption as we as for improvement of chemica reaction by enarging the contact area Fine fu cone atomization with the aid of severa hoow cones spraying into one another SPP Fire fighting, cooing of gaseous and soid materia, chorine precipitation xtremey fine fu cone atomization with the aid of severa hoow cones spraying into one another On request For further informations pease refer to our bro chure»lecher nozzes for fire fighting«efectorpate nozze Series V [/min] Connection Appication/ Page at p = 2 bar esign /2 SPP Fire fighting and broadcast spraying Noncogging nozze without swir inserts

5 Axiafow fu cone nozzes Series 490 / 491 NW Patent pending Noncogging nozze design Stabe spray ange Particuary even iquid distribution Appications: Ceaning and washing processes, surface spraying, Container ceaning, foam precipitation, degassing of iquids Series 490 Series 491 Series 490/491 represents a new generation within the axiafow fu cone nozzes product group These nozzes were deveoped using stateoftheart design and simuation methods (CF) Nozzes of series 490/491 repace series 460/461 which are sti avaiabe on request imensions Weight L 1 L 2 ex rass L 2 ex L1 L 2 ex AM L 1 AM 1/8 SPT 1/4 SPT 3/8 SPT 3/8 SPT 1/2 SPT 1/2 SPT 3/4 SPP 1 SPP , Subject to technica modification In a critica instaation situation, pease ask for the exact dimensions 13 g 16 g 30 g 50 g 60 g 85 g 190 g 350 g Ordering no Type Mat no V [/min] Spray diameter at p = 2 bar Spray ange 1Y AISI 316L 30 rass 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPP 1 SPP = = mm mm AM AM Ony avaiabe in materia 30 = bore diameter = narrowest free cross section Continued on next page p 2 0,4 Conversion formua for the above series: V 2 p 35 1 ( 10 bar) ( )

6 Axiafow fu cone nozzes Series 490 / 491 NW Patent pending Ordering no Type Mat no V [/min] Spray diameter at p = 2 bar Spray ange AISI 316L rass 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 1Y 30 3/4 SPP 1 SPP = = mm mm AM AM AM AM AM = bore diameter = narrowest free cross section xampe Type + Materia no + = Ordering no for ordering: Y + = Y Other nozze materias (specia aoys, pastics) are avaiabe on request ( 10 bar) ( ) 36 Conversion formua for the above series: V 2 p 2 0,4

7 Axiafow fu cone nozzes Series 460 / 461 Very uniform spray pattern Large free crosssections, due to optimized xstye swir insert Appications: Ceaning and washing process, cooing of gaseous fuids and soids, surface spraying, spraying onto mats in air washers, improving of chemica reactions L 1 L 2 ex ex L 1 L 2 imensions L 1 L 2 ex 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPP Subject to technica modifications Pease enquire about the exact dimensions if the instaation situation is critica! Type Mat no Ordering no V [/min] Spray diameter at p = 2 bar Spray ange 5 PVF 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPP = = mm mm X = bore diameter = narrowest free cross section Materia PP (Materia no 53), connection 3/4 SPT ( CK) Continued on next page Conversion formua for the above series: V 2 ( 10 bar) ( ) p 2 0,4 37

8 Axiafow fu cone nozzes Series 460 / 461 Type Mat no Ordering no V [/min] Spray diameter at p = 2 bar Spray ange 5 PVF 1/8 SPT 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPP = = mm mm X = bore diameter = narrowest free cross section Materia PP (Materia no 53), connection 3/4 SPT ( CK) The foded page at the end of the cataogue wi give you a survey on the various assemby possibiities For compete assemby accessories, pease refer to»accessories«xampe Type + Materiano + = Ordering no for ordering: = ( 10 bar) ( ) 38 Conversion formua for the above series: V 2 p 2 0,4

9 Axiafow fu cone nozzes Series 405 Very uniform spray pattern Appications: Surface spraying, spraying over packings, ceaning and washing process, chemica process engineering, cooing of gaseous fuids and soids, water treatment imensions L 1 L 2 ex 1 1/4 SPP 1 1/2 SPP 2 SPP Type Ordering no Matno V [/min] Spray diameter at p = 2 bar Spray ange 1Y 30 AISI 316L rass 1 1/4 SPP 1 1/2 SPP 2 SPP = 05 m = 1 m AP AR AP AR AP AR = bore diameter = narrowest free cross section xampe Type + Materiano + = Ordering no for Ordering: Y + AP = Y AP Conversion formua for the above series: V 2 ( 10 bar) ( ) p 2 0,4 39

10 Axiafow fu cone nozzes Series 403 Very uniform spray pattern Appications: Surface spraying, spraying over packings, chemica process engineering, cooing of gaseous fuids and soids version Type imensions ISO 228 L 1 L 2 ex L 1 L / / 2 A 3 A 3 1 / 2 A version ø ex ø version Type / imensions ISO / 2 A 3 A 3 1 / 2 A 4 A L 1 L 2 ex Version v Ordering no Type Mat no V [/min] Spray diameter at p = 2 bar Spray ange 1Y AISI 316L = = m 1 m = bore diameter = narrowest free cross section xampe Type + Materiano = Ordering no for ordering: Y = Y ( 10 bar) ( ) 310 Conversion formua for the above series: V 2 p 2 0,4

11 Axiafow fu cone nozzes for retaining nut Series 468 Fu cone nozze for assemby with retaining nut Uniform fu cone spray Appications: Surface spraying, spraying over packings, chemica process engineering, ceaning and washing processes, cooing of gaseous fuids and soids L Weight brass: 18 g Spray ange Ordering no Type Matno 17 1) 30 5 AISI 316Ti/AISI 316L rass PVF V [/min] [US ga/ min] at 40 psi L Spray diameter at p = 2 bar = 200 mm = 500 mm ) We reserve the right to deiver AISI 316Ti or AISI 316L under the materia no 17 = bore diameter = narrowest free cross section xampe Type + Materiano = Ordering no for ordering = The foded page at the end of the cataogue wi give you a survey on the various assemby possibiities For compete assemby accessories, pease refer to»accessories«for assemby possibiities pease refer to fodet page Conversion formua for the above series: V 2 ( 10 bar) ( ) < p 2 0,4 311

12 Tangentiafow fu cone nozzes Series 422 ( 10 bar) ( ) 312 Conversion formua for the above series: V 2 p 2 0,4

13 Tangentiafow fu cone nozzes Pastic version Series 422 / 423 Tangentiay arranged iquid suppy Without swir inserts Noncogging Stabe spray ange Uniform spray Appications: Ceaning and washing process, cooing of gaseous fuids and soids, surface spraying, spraying onto mats in air wash ers, improving on chemica reactions, foam contro Materia: PVF imensions L 1 L 2 L ex Weight PVF 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPT g 16 g 40 g 50 g Type Ordering no Mat no V [/min] Spray diameter at p = 110 bar Spray ange 5 PVF 1/4 SPT 3/8 SPT 1/2 SPT 3/4 SPT [US ga/ = = min] at psi mm mm CK CK = bore diameter = narrowest free cross section The foded page at the end of the cataogue wi give you a survey on the various assemby possibiities For compete assemby accessories, pease refer to»accessories«xampe Type + Materiano + = Ordering no of ordering: = Conversion formua for the above series: V 2 p 2 313

14 Tangentiafow fu cone nozzes ayonet quickreease system Series 422 Quick and safe assemby, without too Spacesaving instaation Noncogging and maintenancefree igh resistance to temperatures and chemicas Appications: Ceaning probems, cooing process, foam contro Type / / Weight (PVF): 20 g Type / / Weight (PVF): 14 g Ordering no Type Matno V [/min] Spray diameter at p = 1 10 bar Spray ange 5 PVF 53 PP ayonet quickreease [US ga/ mm] at = = psi mm 500 mm K K K K K K Simpe assemby just with a twist Nozze set assembed on pipe = bore diameter = narrowest free cross section The foded page at the end of the cataogue wi give you a survey on the various assemby possibiities For compete assemby accessories, pease refer to»accessories«314 Conversion formua for the above series: V 2 p 2

15 Custer head nozzes Series 502 / 503 Fine fu cone atomization with the aid of severa hoow cones spraying into one another Appications: Cooing of gaseous and soid materia, desuperheating, chorine precipitation, absorption as we as for improvement of chemica reaction by enarging the contact area 70 imensions 1/2 3/4 ex ex Weight (rass) 250 g 870 g ex 1 imensions 1/2 3/4 ex ex 2 1 ex Weight (rass) 150 g 410 g Spray ange Ordering no Type Matno 17 1) 30 AISI 316Ti/AISI 316L rass SPP V [/min] [US ga/ min] at 40 psi Spray diameter at p = 2 bar = 1000 mm = 2000 mm /2 3/4 3/ /2 1/2 3/4 3/4 3/4 3/4 3/ ) We reserve the right to deiver AISI 316Ti or AISI 316L under the materia no 17 = bore diameter = narrowest free cross section xampe Type + Materiano = Ordering no for ordering: = The foded page at the end of the cataogue wi give you a survey on the various assemby possibiities For compete assemby accessories, pease refer to»accessories«iagram of spray diameter Spraying Spritzabstand distance Strahdurchmesser Spray diameter 70, p = 2 bar Spraying Spritzabstand distance Strahdurchmesser Spray diameter 130, p = 2 bar Conversion formua for the above series: V 2 p 2 315

16 efectorpate nozze Series 525 Fu cone spray Non cogging nozze without swir insert Appications: Fire fighting and broadcast spraying, wide area spray 1/2 SPP 11 14,5 ex 24 53,5 56 Weight: 68 g Ordering no Type Matno mm V [/min] Spray diameter [] at p = 3 bar ca ) Spray ange rass AISI 316Ti/AISI 316L [US ga/ min] at psi = 1 m = 3 m m 1000 m 1020 m 1060 m 680 m 520 m 640 m 1320 m 1340 m 1360 m 1040 m 1020 m 1) We reserve the right to deiver AISI 316Ti or AISI 316L under the materia no 17 = bore diameter Version with dust protection cap on request xampe Type + Materiano = Ordering no for ordering: = For information on further fire fighting nozzes pease refer to our brochure,»lecher nozzes for fire fighting«pease ask for this brochure, using the teefax form at the end of the cataogue 316 Conversion formua for the above series: V 2 p 2

Extremely uniform liquid distribution Wide flow rate range Large number of available spray angles

Extremely uniform liquid distribution Wide flow rate range Large number of available spray angles Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface

More information

Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment

Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment Absorption Chemica process engineering Cooing isinfection esuperheating ust contro Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of texties Oi

More information

Full cone nozzles. Axial-flow full cone nozzles

Full cone nozzles. Axial-flow full cone nozzles Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control Gas treatment ing onto mats in air washers ing over packings Surface

More information

Flat fan nozzles. tongue-type nozzles

Flat fan nozzles. tongue-type nozzles Fat fan nozzes et ceaning Coating Steam ceaning Degreasing igh pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning Spray

More information

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others... Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,

More information

Flat fan nozzles. Nozzle characteristics

Flat fan nozzles. Nozzle characteristics Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning

More information

Precision Spray Nozzles for the Chemical Industry

Precision Spray Nozzles for the Chemical Industry Precision Spray Nozzes for the Chemica Industry P R O C S S O P T I M I Z AT I O N W I T H N O Z Z L T C H N O LO G Y A As eary as when his trading company was founded in 1879, Pau Lecher beieved in chemistry.

More information

Hollow cone. nozzles

Hollow cone. nozzles Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of textiles

More information

Hollow cone. nozzles

Hollow cone. nozzles Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of textiles

More information

Full cone nozzles.

Full cone nozzles. nozzles Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control as treatment ing onto mats in air washers ing over packings

More information

Precision Spray Nozzles for Surface Technology

Precision Spray Nozzles for Surface Technology Precision Spray Nozzes for Surface Technoogy I N N O V AT I V E N O Z Z L E T E C H N O L O G Y M A K E S I N N O V AT I V E S U R F A C E T E C H N O L O G Y P O S S I L E eing successfu means making

More information

Precision Spray Nozzles for the Food and Beverage Industry

Precision Spray Nozzles for the Food and Beverage Industry Precision Spray Nozzes for the Food and everage Industry W I D R A N G O F S R V I C S F O R Y O U R S U C C S S Wide product range Service xperience Custom made soutions COMPTN CUSTOMR ADVANTAGS Processoptimization

More information

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC OVE GROUND TNKS 66 WTER DIVISION ROTOTEC WTER DIVISION ROTOTEC 67 VERTICLE From 50 to 10000 itres Instaation Paced directy on a fat supporting surface vaiabe coours: standard on request Ø Cover Inet Outet

More information

Precision Spray Nozzles for Pickling Lines

Precision Spray Nozzles for Pickling Lines Precision Spray Nozzles for Pickling Lines O H O S O O H HIGH QUALITY NOZZLES FOR YOUR HIGH QUALITY PROCESS The closer it comes to the final step of a production process the more important the direct result

More information

Precision Spray Nozzles for Pickling Lines

Precision Spray Nozzles for Pickling Lines Precision Spray Nozzles for Pickling Lines O H O S O O H HIGH QUALITY NOZZLES FOR YOUR HIGH QUALITY PROCESS The closer it comes to the final step of a production process the more important the direct result

More information

Hollow cone nozzles.

Hollow cone nozzles. Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air, goods, or textiles Oil spraying Protection of

More information

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection: Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque

More information

Model TWS. Swirl Diffusers

Model TWS. Swirl Diffusers Mode TWS Swir Diffusers Mode TWS Advanced Air s new range of high performance TWS ceiing swir diffusers have been designed to deiver the high air change rates required to meet the demand of high oads.

More information

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured

More information

SCALEMASTER HP»High Performance«

SCALEMASTER HP»High Performance« SCLMSTR HP»High Performance« SCLMSTR HP»High Performance«Descaing Nozzes with Distinctive dvantages s a resut of greater demands on product surface quaity and pant efficiency, descaing systems need to

More information

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae

More information

Linear Slot Diffusers Series

Linear Slot Diffusers Series Linear Sot iffusers 5000 Series Linear Sot iffusers 5000 Series The Series 5000 Linear Sot Ceiing iffuser has been speciay designed to provide both the unobtrusive appearance required for architectura

More information

S I G N E X T R U S I O N S & S Y S T E M S. Kit Includes: LED s. Power Supply. Clear Plastic (Not Included) 1/2 Opening. Cap Screw Part #5940

S I G N E X T R U S I O N S & S Y S T E M S. Kit Includes: LED s. Power Supply. Clear Plastic (Not Included) 1/2 Opening. Cap Screw Part #5940 3032 Waker Ridge Dr. NW Grand Rapids, MI To Free: (877) 784-0405 Fax: (1) 784-0411 Wa Mount Tension Frame (Mi Finish) Cover Screw Part #5215 1 4-1/8 1-1/ Fexibe Face (Not Incuded) Mounting Hardware (Not

More information

Our policy is one of continuous research and development. We therefore reserve the right

Our policy is one of continuous research and development. We therefore reserve the right Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can

More information

MAXIMUM FREE PASSAGE FULLJET SPRAY NOZZLES UNIQUE DESIGN MINIMIZES CLOGGING, PROVIDES SUPERIOR PERFORMANCE

MAXIMUM FREE PASSAGE FULLJET SPRAY NOZZLES UNIQUE DESIGN MINIMIZES CLOGGING, PROVIDES SUPERIOR PERFORMANCE MAXIMUM FREE PASSAGE FUJET SPRAY NOZZES UNIQUE DESIGN MINIMIZES COGGING, PROVIDES SUPERIOR PERFORMANCE The liquid comes in contact with the vane as it enters the nozzle. The unique vane design stabilizes

More information

Precision Spray Nozzles for the Chemical Industry

Precision Spray Nozzles for the Chemical Industry Precision Spray Nozzles for the Chemical Industry PROSS OPTIMIZATION WIT NOZZL TCNOLOGY Any company that wants to keep ahead of the competition needs to constantly optimize its production processes. In

More information

PRECISION PUMP APPLICATOR

PRECISION PUMP APPLICATOR User s Manua nstaation & Operating nstructions PRECSON PUMP APPLCATOR For Box, Junior, and Custom Appicators For questions and/or product support contact the TW ROCOL North America Customer Service Department

More information

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2 Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping

More information

solenoid dosing pumps

solenoid dosing pumps teknaevo soenoid dosing pumps innovation > technoogy > future The evoution of soenoid dosing pumps Cever Just Modes, Just PVDF, A functions in one pump modes that cover 1 to 60 t/h with an output pressure

More information

Aluminium Fixed Blade Return Grilles Series

Aluminium Fixed Blade Return Grilles Series Auminium Fixed Bade Return Gries 4900 Series Auminium Fixed Bade Return Gries Modes 5145H and 51FH Return Gries have fixed horizonta bades (parae to width/first specified dim.) spaced on 19mm centres with

More information

Center drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material

Center drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony

More information

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE 04666358 Edition 2 February, 1999 INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE. IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING VALVE. IT IS THE RESPONSIBILITY

More information

Section L Accessories

Section L Accessories Section L Tabe of Contents QuickJet and UniJet Spray Nozze Systems/Components QuickJet Spray Nozze Systems...L2 UniJet Spray Nozze Systems........... L2 Standard QuickJet Bodies...L3 ProMax QuickJet Bodies...L3

More information

Manifold Technology.

Manifold Technology. ----------------------------------------------------- 2017.2 Manifod Technoogy. made in Germany I Epkg. unitrything UNDER CONTROL. Manifod Technoogy - I BEULCO heating and cooing manifods made of high-quaity

More information

AVOLA KREISSÄGEN. Revolving Cross Cut Saw GAMA 65 K. Technical Equipment. Options

AVOLA KREISSÄGEN. Revolving Cross Cut Saw GAMA 65 K. Technical Equipment. Options AVOLA Revoving Cross Cut Saw GAMA 65 K Technica Equipment Motor rating 8,1 kw/400 Vac-50 Hz, star / deta start sawbade mounted direct on motor shaft Motor speed 3.000 rpm / sawbade speed 3.000 rpm Sawbade

More information

VN plus semi-mounted ploughs Perfect performance brings you success. Further VN-program:

VN plus semi-mounted ploughs Perfect performance brings you success. Further VN-program: GB Further VN-program: VN pus semi-mounted poughs Perfect performance brings you success VN TerraMix/TerraFex universa cutivator 2-/3-beam VN TerraCut muching cutivator 4-beam VN TerraDisc compact-disc

More information

GStype/HGStype/WGStype

GStype/HGStype/WGStype Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing

More information

Swivel and visitor chairs quarterback

Swivel and visitor chairs quarterback Swive and visitor chairs quarterback Generousy proportioned... Generousy proportioned and eegant the Sedus quarterback is an office swive chair which promises penty of space for productive we-being at

More information

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs

More information

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2 Stanar Quick-Disconnect Coupings Series ES one-way shut-off Materias a PN 35 bar -20 C +100 C air a.o. 7,2 ISO 228/DIN 2999/DIN 13 1100 L/min yes 1-way Eur. Stanar wor-wie 10 Coupings with mae threa Threa

More information

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series

More information

1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP.

1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP. The engineering resut of carefu market research: Sma, ight, powerfu and universay appicabe Te: 0 85 3 / 39-0 Fax: 3 94 8 http://www.hatz-diese.de emai: marketing@hatz-diese.de.4-7.7 kw.8-0.5 HP 5 / 629

More information

CATALOG 2017 SERIES 1

CATALOG 2017 SERIES 1 CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

R O L L C O O L I N G F L A T J E T N O Z Z L E

R O L L C O O L I N G F L A T J E T N O Z Z L E 6 S R I S R O L L C O O L I N G F L A T J T N O Z Z L NW! Patent Pending The correct alignment of the roll cooling nozzles on the spray header is essential for optimal roll cooling. Flat jets are the preferred

More information

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability)

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability) Kerk onventiona s: FW Series Free Wheeing Kerk FW Series conventiona stye, without anti-backash function. The Kerk FW Series genera purpose free-wheeing nut is for appications not requiring anti-backash

More information

Interact Overhead Power

Interact Overhead Power Interact Overhead Power 75 range introduction feature benefits Interact Overhead Power System is a powertrack catering for singe, 3 phase or dua circuit appications suitabe for standard, permanent ive,

More information

Hydraulic notching machines

Hydraulic notching machines Notching & punching Hydrauic notching machines MRA Manua pipe notcher XXFor notching pipes up to 4.5 mm wa thickness XXUp to three pipe diameters can e notched (MRA 2) XXCan e used oth horizontay and verticay

More information

STEPPER DRIVE : E-5042

STEPPER DRIVE : E-5042 54, Annapurna Industria Estate, Tiak oad, E L E C T O N I C S Introduction The E-5042 is a fuy digita stepper drive deveoped with advanced DSP contro agorithm based on the atest motion contro technoogy.

More information

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2 Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................

More information

1

1 www.systems-sunight.com 1 2 www.systems-sunight.com SUNLIGHT s motive power (traction) batteries motivate your business, as they provide reiabe energy to your industria vehices every day. SUNLIGHT s speciaized

More information

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1 NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer

More information

ASSEMBLY AND INSTALLATION

ASSEMBLY AND INSTALLATION ASSEMBY AND INSTAATION STRAIGT AND EVE GUARDRAIING (using Tpes 10, 15, 20, 21, 25 & 26) Where: = distance between centres of uprights I = ength of horizonta tube = distance from ground to centre ine of

More information

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing

More information

CATALOG 2016 SERIES 1

CATALOG 2016 SERIES 1 CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1 Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

HSS-Drills. HSS-DrillS

HSS-Drills. HSS-DrillS -Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN

More information

Filter Return Grilles. 51F Series Aluminium

Filter Return Grilles. 51F Series Aluminium Fiter Return Gries 51F Series uminium Fiter Return Gries 51F Series uminium The dvanced ir Mode Series 51F Fiter Return Gries are a convenient and economica means of fitering primary return air ocay. They

More information

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting 1 DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F- Gossary of terms... P.176~ guide... P.71~ Genera precautions... P.179~ PHOTO PHOTO IGHT FOW PARTICUAR

More information

/1505-I-20 TOO L HO L DERS 2015 GM 300

/1505-I-20 TOO L HO L DERS 2015 GM 300 TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY

More information

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

INSTRUMENTATION BALL VALVES VB3 Series

INSTRUMENTATION BALL VALVES VB3 Series INSTRUMENTATION BALL VALVES VB3 Series www.korokusa.com Kor-Lok USA eatures Directiona ande Pressure rating wit standard PTE seats 3000psig (206bar) ony for te vaves wit orifice 4.8 2500psig (172bar) for

More information

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM GEA PUMPS Dispacement from 10 to 36 ccm Pressure up to 300 bar GHD0 Speed from 350 to 3400 PM Gear Pump Cataogue GHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Blanking tools for the automotive industry

Blanking tools for the automotive industry anking toos for the automotive industry 1736 006 3 rt.-nr..400.03.0706.01000 07/006 17363 00 1 anking toos for the automotive industry Tabe of contents age age FIRO Tradition and Technoogy 6 7 0. 1.. 3.

More information

R O L L C O O L I N G F L A T J E T N O Z Z L E

R O L L C O O L I N G F L A T J E T N O Z Z L E 6 S R I S R O L L C O O L I N G F L A T J T N O Z Z L NW! Patent Pending The correct alignment of the roll cooling nozzles on the spray header is essential for optimal roll cooling. Flat jets are the preferred

More information

The giant amongst the giants.

The giant amongst the giants. BB9090 PLUS 02 BB9090 PLUS The giant amongst the giants. The argest mode of the New Hoand big baer range is the BB9090 PLUS. Its superior performance both in terms of perfect, firm, we-shaped baes as we

More information

TD3 Series UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE TD3-1-UN-65 TD3-3-UN-65

TD3 Series UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE TD3-1-UN-65 TD3-3-UN-65 TD3-1-UN-65 TD3-3-UN-65 RETROFIT INSTALLATION GUIDE UNIQUE LIGHTING SOLUTIONS WARNING Retrofit instaation must ony be performed by a icensed eectrician. To prevent death, injury or damage to property this

More information

Threadmill Nomenclature TMR N L ISO C

Threadmill Nomenclature TMR N L ISO C Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3

More information

CJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ

More information

Imperial College carbon capture pilot plant Preparing today s students for tomorrow s world

Imperial College carbon capture pilot plant Preparing today s students for tomorrow s world Imperia Coege carbon capture piot pant Preparing today s students for tomorrow s word Panting the seeds of change today Shaping tomorrow s engineers By suppying equipment for Imperia Coege s carbon capture

More information

Ready for the future. ST 1082 mobile column lifts capacity kg

Ready for the future. ST 1082 mobile column lifts capacity kg Ready for the future ST 1082 mobie coumn ifts capacity 8.200 kg Two hard and fast aws appy in today s maintenance and repair faciities: time is money and an agreement is an agreement. This is why more

More information

External Louvres Series

External Louvres Series Externa Louvres 1600 Series Genera Product Overview Externa Louvres Advanced Air Externa Louvres feature an architecturay appeaing straight bade design with smooth, cean ines that visuay compiment any

More information

Threadmill Nomenclature TR N L ISO C

Threadmill Nomenclature TR N L ISO C Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0

More information

SEAM PROTECTION SYSTEMS SOUCOAT P LNS LAS PRC ANL

SEAM PROTECTION SYSTEMS SOUCOAT P LNS LAS PRC ANL SEAM PROTECTION SYSTEMS SOUCOAT P LNS LAS PRC ANL PERFECT WELD SEAM PROTECTION EASY TO OPERATE EASY AND FAST CONVERSION FROM LIQUID TO POWDER SYSTEM WITH QUICK - CONNECTION Technoogy that keeps you ahead

More information

Mechanical Level Switches

Mechanical Level Switches Mechanica Leve Switches SOR mechanica eve switches are rugged, industria products specificay designed for versatiity of appication. This cataog contains appication and ordering data for foat and dispaceroperated

More information

--... Need a prototype tomorrow? Experts in customization, innovative design and engineering

--... Need a prototype tomorrow? Experts in customization, innovative design and engineering . Hay!J.~!!., kerk " Experts in customization, innovative design and engineering Haydon Kerk Motion Soutions has the e

More information

High-performance milling tools New tools 2017

High-performance milling tools New tools 2017 passion for precision High-performance miing toos New toos 2017 New cutting data cacuator TooExpert MFC End miing toos for stee, stainess stee, titanium and nicke Cyindrica Smooth-edged, norma version

More information

F o a m C o n t r o l C l e a n i n g

F o a m C o n t r o l C l e a n i n g Full Cone s Absorption Fire Protection Chemical Injection Rinsing F o a m C o n t r o l C l e a n i n g Gas Treatment esuperheating Mist Elimination Cooling ust Control B Full Cone s Introduction CHOOE

More information

TANK - S ELECTRICAL SYSTEM

TANK - S ELECTRICAL SYSTEM TANK - S ELECTRICAL SYSTEM Mode Year 2009 TANK - S ELECTRICAL SYSTEM TABLE OF CONTENTS: PAGE 3 ) PIMARY WIRE COLOR DESIGNATION: Red. Green. Orange. Yeow. Bue. PRIMARY COMPONENTS: Battery. Fuses. Seat Switch.

More information

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation 777 PHOTO PHOTO DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms... P.16~ seection guide... P.77~ Genera precautions... P. Conforming

More information

Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g

Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO ON NOZZ INTRODUTION

More information

Blind Rivet Nuts indispensable part modern installation engeneering nearly unlimited fields of applications Honsel-Group

Blind Rivet Nuts indispensable part modern installation engeneering nearly unlimited fields of applications Honsel-Group Bind Rivet Nuts Bind rivet nuts have become an indispensabe part modern instaation engeneering. They aow to insta bot threads of different types into...... thin or ow rigidity components... hoow sections

More information

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series. INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard

More information

Piston pumps for eff icient wellpoint dewatering

Piston pumps for eff icient wellpoint dewatering Piston pumps for eff icient wepoint dewatering PT series P u m p s f o r r e s u t s Innovative eaders for the past 60 years BBA Pumps BV woudn t be a Dutch company if it didn t know how to dea with water!

More information

product WK-series industrial burners WK40 to WK80 industrial burners kw Information on duoblock burners

product WK-series industrial burners WK40 to WK80 industrial burners kw Information on duoblock burners product Information on duobock burners WK-series industria burners WK40 to WK80 industria burners 002 000 kw The powerfu duoboc burner: oduar design for ratings up to 2 W arae operation Air preheater Combustion

More information

Precision Mounted Points

Precision Mounted Points Precision Mounted Points Master MOUNTED POINTS Quaity Assured Perfecty concentric and uniform Securey fixed to shank Versatie appication Comprehensive range Master Abrasives UK Ltd High March, Long March

More information

Geberit Mapress. Product Guide and Price List. Valid from 1 May 2017 (Prices exclusive of VAT)

Geberit Mapress. Product Guide and Price List. Valid from 1 May 2017 (Prices exclusive of VAT) eberit Mapress Prouct uie an Price ist Vai from 1 May 2017 (Prices excusive of VAT) eberit Mapress Stainess Stee eberit Mapress Carbon Stee eberit Mapress Copper eberit Pipe Vave Fittings Appenix Swiss

More information

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others... Air nozzles Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others Air nozzles As a rule, any flat fan or solid stream nozzle can be operated with air instead of

More information

optibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores

optibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores optibet KS V-Grooved Pueys - Baancing, Surcharges for Bores 1 2 3 4 5 6 7 8 9 10 11 Baancing: The ist prices appy, as per VDI 2060, to cast iron pueys baanced in one pane as foows: Grade G 16 for Ø d d

More information

SP Stationary concrete pump. Concrete output max. 113 m³/h Concrete output max. 162 bar. 18,300-19,400 lb

SP Stationary concrete pump. Concrete output max. 113 m³/h Concrete output max. 162 bar. 18,300-19,400 lb SP 38 Stationary pump Concrete output max. 113 m³/h Concrete output max. bar Concrete output - 24 kw Machine weight 8,3-8,8 kg 18,3-19,4 b The SP 38 from SCHWING Performance and reiabiity SP 38 Stationary

More information

VDC Series High-Pressure Type Variable Volume Vane Pump

VDC Series High-Pressure Type Variable Volume Vane Pump V SRS PRSSUR TYP VARA VU VA PUP V Series igh-pressure Type Variabe Voume Vane Pump eatures q ighy efficient and stabe high-pressure operation nnovative pressure contro and pressure baance mechanisms combine

More information

POWER TRANSMISSION FLEXIBLE COUPLINGS ORPEX

POWER TRANSMISSION FLEXIBLE COUPLINGS ORPEX POWER TRANSMISSION FLEXIBLE COUPLINGS 2 FLEXIBLE COUPLINGS Orpex copings are ses compensation copings everywhere where an absotey reiabe torqe transfer is reqired. Orpex copings cover with their types

More information

EP Series WPS150S. Generator Set Specification. Super Quiet, Superior Life! Page of 5

EP Series WPS150S. Generator Set Specification. Super Quiet, Superior Life! Page of 5 EP Series Generator Set Specification Super Quiet, Superior Life! Page - 1 - of 5 3-Phase, 50Hz@1500RPM Prime Power Standby Power Votage kw kva Amps 380 120 150 227.9 400 120 150 216.5 415 120 150 208.7

More information

User Manual. 12 Volt Battery Charger THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS READ ENTIRE INSTRUCTION BEFORE USE

User Manual. 12 Volt Battery Charger THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS READ ENTIRE INSTRUCTION BEFORE USE User Manua 12 Vot Battery Charger Pus Battery maintainer and Rejuvenator THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS READ ENTIRE INSTRUCTION BEFORE USE Mode No. 60134 / 60138 1 WARNING

More information

INSTRUCTION MANUAL LITHIUM-ION POLYMER MINI JUMP STARTER (KIT SET) SC POWER SCB22

INSTRUCTION MANUAL LITHIUM-ION POLYMER MINI JUMP STARTER (KIT SET) SC POWER SCB22 INSTRUCTION MANUAL LITHIUM-ION POLYMER MINI JUMP STARTER (KIT SET) Technica Specifications SCB22 Battery Type: Lithium-Ion Poymer Battery Capacity: 2200 mah (12V DC) Crancking Ampere: 220 A Peak Current:

More information

VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS

VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS ILASS-Europe 02 Zaragoza 9 11 September 02 VALIDATION OF AN ENHANCED LIQUID SHEET ATOMISATION MODEL AGAINST QUANTITATIVE LASER DIAGNOSTIC MEASUREMENTS C. A. Chryssakis, K. D. Drisco, V. Sick, D. N. Assanis

More information

Hollow Cone Spray Nozzles Series

Hollow Cone Spray Nozzles Series Hollow Cone Spray Nozzles Series TANK WASHING HOLLOW CONE APPLICATION Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment

More information

RT 100 T NEW. Solid carbide spiral-flute deep hole drills for drilling depths up to 40 x D. Now up to 40 x D. Made by Guhring

RT 100 T NEW. Solid carbide spiral-flute deep hole drills for drilling depths up to 40 x D. Now up to 40 x D. Made by Guhring Soid carbide spira-fute deep hoe dris for driing depths up to 40 x D NEW Now up to 40 x D Made by Guhring ex-stock range Avaiabe ex-stock now: The spirafute deep hoe dri. The program incudes standard dris

More information

Overview. The MicorTIG series at a glance

Overview. The MicorTIG series at a glance www.orch.com.au Overview Lorch, word-eading, new, a in one resonance technoogy that enabes the next generation of portabe machines to operate from mains suppy, sma generators and batteries a deivering

More information

Product Information. Process pressure/hydrostatic Pressure transmitter VEGABAR 51, 52, 53, 54, 55

Product Information. Process pressure/hydrostatic Pressure transmitter VEGABAR 51, 52, 53, 54, 55 Product Information Process pressure/hydrostatic Pressure transmitter VEGABAR 5, 5, 5, 54, 55 Contents Contents Measuring principe.......................................................................................

More information

KENNAMETAL HERTEL FIX-PERFECT

KENNAMETAL HERTEL FIX-PERFECT KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification

More information