HSS-Drills. HSS-DrillS
|
|
- Emory Williamson
- 5 years ago
- Views:
Transcription
1 -Dris -DriS
2 Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12, eft-hand DIN 333 0,500-8, R DIN 333 0,500-10, R TiN DIN 333 0,800-6, reinf. neck Stock std. 1,000-6, B DIN 333 1,000-6, Center dris with fat Stock std. 1,600-6, R Stock std. 1,600-8,
3 Center dris Center dris without fat DIN 333 Cataog no Standard dri for producing centre hoes acc. to DIN 332, Sheet 1, form (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony singe-sided. Too materia Reieved cone Center dris without fat DIN 333 Cataog no Standard dri for producing centre hoes acc. to DIN 332, Sheet 1, form (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony singe-sided. Point ange 118 Toerance on Ø to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Too materia eft-hand Reieved cone Point ange 118 Toerance on Ø to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Cataog no Too materia Discount group eft-hand
4 Center dris Center dris without fat DIN 333 Cataog no Specia purpose dri for producing centre hoes to DIN 332, sheet 1, form R (radiused). Specia features of these toos are: 1. high fracture-resistant properties. 2. precise concentricity of the point in reation to the body. 3. radiused form providing a protected centre hoe. Center dris with Ø 0.5 and 0.8 mm are ony singe-sided. Too materia R Reieved cone Point ange 118 Center dris without fat DIN 333 Cataog no Specia purpose dri for producing centre hoes to DIN 332, sheet 1, form R (radiused). Specia features of these toos are: 1. high fracture-resistant properties. 2. precise concentricity of the point in reation to the body. 3. radiused form providing a protected centre hoe. Center dris with Ø 0.5 and 0.8 mm are ony singe-sided. Toerance on Ø to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Too materia TiN R Point ange 118 Toerance on Ø Reieved cone to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Cataog no Too materia Discount group TiN
5 Center dris Center dris without fat Stock std. reinf. neck Cataog no Specia purpose dri for producing centre hoes to DIN 332, sheet 1, form (without protecting chamfer), except for an annuar groove at the junction of the countersink and the dried hoe. Specia features of these toos are: high fracture-resistant properties, speciay strengthened form at the junction of the piot and body which permits high meta remova rates, specia form cuts annuar groove which acts as a reservoir for the ubricant. Too materia Point ange 118 Toerance on Ø Reieved cone to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Cataog no Too materia Discount group
6 Center dris Center dris without fat DIN 333 Cataog no Specia purpose dri for producing centre hoes to DIN 332, Sheet 1, form B (with protecting countersink of 120 ). Too materia B Reieved cone Point ange 118 Toerance on Ø to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): 120 o Cataog no Too materia Discount group
7 Center dris Center dris with fat Cataog no Specia purpose dri for producing centre hoes to DIN 332, sheet 1, form (without protecting chamfer). For centering and facing machines where the end face is required to be dressed and centred in the same operation. Stock std. Too materia Reieved cone Point ange 118 Center dris with fat Cataog no Specia purpose dri for producing centre hoes to DIN 332, sheet 1, form R (radiused). For centering and facing machines where the end face is required to be dressed and centered in the same operation. Specia features of these toos are: 1. high fracture-resistant properties. 2. precise concentricity of the point in reation to the body. 3. radiused form providing a protected centre hoe. Toerance on Ø to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Stock std. Too materia R Reieved cone Point ange 118 Toerance on Ø to. on body Ø: h7 (to DIN h9) to. on piot Ø (to new standard): Cataog no Too materia Discount group ~15 o S -0,
Center drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material
Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationoptibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores
optibet KS V-Grooved Pueys - Baancing, Surcharges for Bores 1 2 3 4 5 6 7 8 9 10 11 Baancing: The ist prices appy, as per VDI 2060, to cast iron pueys baanced in one pane as foows: Grade G 16 for Ø d d
More informationMarCator 1087 ABS USB. No interface box is required! Simple and inexpensive way to set up a multiple measuring. Digimatic. evaluation instrument
- -46 MarCator 1087 The new Digita Indicator Marcator 1087. The muti-functiona Digita Indicator with a combined anaog and digita dispay; pus toerance and dynamic measuring functions. D y n a m i c m e
More informationGT 2 Timing Belt Pulleys - 3 mm Pitch
GT Timing Bet Pueys - mm Pitch PROFIE AUMINUM OUBE OR NO FANGE / 7.0 /. / MATERIA: Auminum Aoy FINIH: Cear Anoize Cataog Number A AM0F00 A AM07F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00
More informationModel PHS (Female Threading Type)
Mode PHS (Femae Threading Type) φ φ Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 W D 1 D 2 B L D JIS Cass 2.1.2.1 PHS 5 35 16 8 M5.8 9 9 11 6 PHS 6 39 18 9 M6 1 11
More informationMarCator 1087 R ABS. Just set once to zero. Battery service life is 3 years. Error free operation
- -6 MarCator 1087 R The new Digita Indicator MarCator 1087 R. The muti-functiona Digita Indicator with a combined anaog and digita dispay as we as toerance and dynamic measuring functions. Dynamic measuring
More informationFilter Return Grilles. 51F Series Aluminium
Fiter Return Gries 51F Series uminium Fiter Return Gries 51F Series uminium The dvanced ir Mode Series 51F Fiter Return Gries are a convenient and economica means of fitering primary return air ocay. They
More informationClamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
More informationBlanking tools for the automotive industry
anking toos for the automotive industry 1736 006 3 rt.-nr..400.03.0706.01000 07/006 17363 00 1 anking toos for the automotive industry Tabe of contents age age FIRO Tradition and Technoogy 6 7 0. 1.. 3.
More information72 PITCH 1/8 FACE 1/8 BORE 20 PRESSURE ANGLE. 29L (800) In CT: (203) NORDEX
20 PRESSURE ANGE 1/8 BORE 5 5 3 STAINESS STEE 2024-T4-AUMINUM ORDER BY CATAOG NUMBER *AS-G1-20 *AS-G1-22 *AS-G1-24 AS-G1-26 AS-G1-27 *AA-G1-20 *AA-G1-22 *AA-G1-24 AA-G1-26 AA-G1-27 20 22 24 26 27.2777..3333.10.37.6.333.1.389.3
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationFlat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationAny switch configuration
Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationPremium quality cutting tools. Super Drills. Gold Drills
Premium quaity cutting toos Super Dris God Dris Super Dris (Precision driing on hard materia) ØD h8 ±3 o SPLIT 1 o POINT L1 HELIX ANGLE L APPLICATION : Driing aoy stee up to 28-35 HRc. Suitabe for driing
More informationExtremely uniform liquid distribution Wide flow rate range Large number of available spray angles
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
More informationLinear Slot Diffusers Series
Linear Sot iffusers 5000 Series Linear Sot iffusers 5000 Series The Series 5000 Linear Sot Ceiing iffuser has been speciay designed to provide both the unobtrusive appearance required for architectura
More informationRCK CLAMPING ELEMENTS
RCK CAMPING EEMENTS SERIES RCK 11 page 6 SERIES RCK 13 7 SERIES RCK 15 8 SERIES RCK 16 9 SERIES RCK 19 10 SERIES RCK 40 11 SERIES RCK 45 12 SERIES RCK 50 13 SERIES RCK 55 14 SERIES RCK 60 15 SERIES RCK
More informationParting Line Interlocks
144 Innovative old Interlocks Parting ine Interlocks For accurate alignment between mold halves ll machining can be done from the parting line saving set-up time and machining costs Components can be purchased
More informationRotary Cam Switches. Rotary Cam Switches
Rotary Cam es Series... 2 Hande Assembies... 8 Accessories... 12 Circuit Diagrams, Technica Information & Dimensions (Onine)... 13 Series R-Line Rotary Cam es... 24 Handes and Accessories... 27 Circuit
More informationAluminium Fixed Blade Return Grilles Series
Auminium Fixed Bade Return Gries 4900 Series Auminium Fixed Bade Return Gries Modes 5145H and 51FH Return Gries have fixed horizonta bades (parae to width/first specified dim.) spaced on 19mm centres with
More informationS I G N E X T R U S I O N S & S Y S T E M S. Kit Includes: LED s. Power Supply. Clear Plastic (Not Included) 1/2 Opening. Cap Screw Part #5940
3032 Waker Ridge Dr. NW Grand Rapids, MI To Free: (877) 784-0405 Fax: (1) 784-0411 Wa Mount Tension Frame (Mi Finish) Cover Screw Part #5215 1 4-1/8 1-1/ Fexibe Face (Not Incuded) Mounting Hardware (Not
More informationKENNAMETAL HERTEL FIX-PERFECT
KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification
More informationPOWER TRANSMISSION FLEXIBLE COUPLINGS ORPEX
POWER TRANSMISSION FLEXIBLE COUPLINGS 2 FLEXIBLE COUPLINGS Orpex copings are ses compensation copings everywhere where an absotey reiabe torqe transfer is reqired. Orpex copings cover with their types
More informationHydraulic notching machines
Notching & punching Hydrauic notching machines MRA Manua pipe notcher XXFor notching pipes up to 4.5 mm wa thickness XXUp to three pipe diameters can e notched (MRA 2) XXCan e used oth horizontay and verticay
More informationAbsorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
More informationPrestolok. Spark resistant push-in fittings for fluids. Catalogue /UK
Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae
More informationPRODUCT CATALOG /613 HIGH PERFORMANCE MICRO DRILLS PILOT DRILLS & STEP DRILLS INTERNAL COOLANT DRILLS SINGLE FLUTE END MILL
5 x x 614 638 HIGH PERFORMANCE MICRO DRILLS PILOT DRILLS & STEP DRILLS 612/613 INTERNAL COOLANT DRILLS SINGLE FLUTE END MILL 638 MICRO END MILLS PRODUCT CATALOG 2014-2015 GERMAN SWISS MACHINES Fax: +91
More informationMini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
More informationAir nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...
Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationPrecision Mounted Points
Precision Mounted Points Master MOUNTED POINTS Quaity Assured Perfecty concentric and uniform Securey fixed to shank Versatie appication Comprehensive range Master Abrasives UK Ltd High March, Long March
More informationSection L Accessories
Section L Tabe of Contents QuickJet and UniJet Spray Nozze Systems/Components QuickJet Spray Nozze Systems...L2 UniJet Spray Nozze Systems........... L2 Standard QuickJet Bodies...L3 ProMax QuickJet Bodies...L3
More informationHigh-performance milling tools New tools 2017
passion for precision High-performance miing toos New toos 2017 New cutting data cacuator TooExpert MFC End miing toos for stee, stainess stee, titanium and nicke Cyindrica Smooth-edged, norma version
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationCODED SWITCHES SPACERS PART NO. PART NO. SCREWS FOR FIELD ASSEMBLY OF THUMBWHEEL SWITCHES (2 screws needed per assembly nuts)
3P SERIES,.100 THK. (Makes section pitch.400 ) 663602000 663609000 3 SERIES FRONT MOUNT, FITS TYPE 0 & 3,.078 THK. (Makes section pitch 10mm) 410802000 410809000 3 SERIES REAR MOUNT, FITS TYPE 2,.150 THK.
More informationDrill - Mill. Tilting Head MH 50V 3ph MH 50G 3ph Features. Can change tool in seconds! Optional Accessories.
MH 50V 3ph 0333-8185 MH 50G 3ph 0333-8180 Heavy, sturdy & soid coumns made of premium cast materia with ground and shaven dovetai guide for exceent stabiity and precision Cockwise/Anti-cockwise rotation
More informationRT 100 T NEW. Solid carbide spiral-flute deep hole drills for drilling depths up to 40 x D. Now up to 40 x D. Made by Guhring
Soid carbide spira-fute deep hoe dris for driing depths up to 40 x D NEW Now up to 40 x D Made by Guhring ex-stock range Avaiabe ex-stock now: The spirafute deep hoe dri. The program incudes standard dris
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationBNZ Small hole boring bars DAL / DDL / DML. G High speed machining for super finishing hardened steel (HRC50~60) G Excellent surface roughness
SUMIBOON / SUMIDIA Precision BNBB M20 Sma hoe boring toos CBN cutting edge is brazed on to a soid carbide shank. Sma hoe boring BNZ M21 Sma hoe boring bars Soid carbide boring bars WB M22 CBN rooving System
More informationFlat fan nozzles. tongue-type nozzles
Fat fan nozzes et ceaning Coating Steam ceaning Degreasing igh pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning Spray
More informationINDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
More informationITM HSS GROUND THREAD HAND TAPS - MACHINE SCREW
TAPER 8 to 10 threads chamfered for easy thread starting in tough materia. PLUG BOTTOMING 3 to 5 threads chamfered for genera use when tapping to bottom of hoe is not critica. This is the most popuar tap
More information10.3 Flanged Connections acc. to EN 1092
10.3 Flanged Connections acc. to EN 1092 EN 1092 is split into two sections: - EN 1092-1 edition 09-2008 for steel flanges - EN 1092-2 edition 06-1997 for cast iron flanges EN 1092 contains dimensions
More informationH T STD STD STD
Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2
More informationCNC INTERNAL GRINDERS
CNC INTERNAL GRINDERS IG 50 IG 150 IG 150 U WHO WE ARE Estabished in 1973, Micromatic Grinding Technoogies Ltd (MGT ) have been manufacturing a wide range of Externa, Interna, Universa and Specia Purpose
More informationCoarse Pitch Axle. FR P: F:
Pr e - eng i neere Coponents Coarse Pitc Ae AT P: 00 301 00 F: 00 1 0 e_oesterreic@iacronco CZ P: 0 2 41 +4 2 4 F: 0 2 +4 1 e_c@iacronco FR P: +33 1 4 2 23 F: +33 1 4 2 22 e_france@iacronco NL P: +31 (0)
More informationCOUNTERSINK SENKER HSS. Being the best through innovation. - Deburring, Chamfering, Countersinking, HSS & 8% Cobalt
Being the best through innovation SINK SENKER - Deburring, Chamfering, Countersinking, & % Cobalt - Entgraten und anfasen. und E-Co SEECTION GUIDE SIZE ITEM MODE DESCRIPTION PAGE MIN MAX C19 C39, DEBURRING
More informationINSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE
04666358 Edition 2 February, 1999 INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE. IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING VALVE. IT IS THE RESPONSIBILITY
More informationEU2B Series: 30mm Hazardous Location Switches EC2B Series: Hazardous Location Control Stations
EUB Series: 0mm Hazardous Location Switches ECB Series: Hazardous Location Contro Stations PRODUCT DESCRIPTION Compying with UL, IECEx, and ATEX Directives for hazardous environments, new 0mm EUB Hazardous
More informationS.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1
NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationFasteners Inc. innovative fastener solutions TOOLS CATALOG. "Quality The First Time"
Fasteners Inc. innovative fastener solutions TOOS CATAOG "Quality The First Time" WHO WE ARE GOEBE FASTENERS INC. is a subsidiary of GOEBE GmbH, which has been the leading corporation in Europe for specialty
More informationAVOLA KREISSÄGEN. Revolving Cross Cut Saw GAMA 65 K. Technical Equipment. Options
AVOLA Revoving Cross Cut Saw GAMA 65 K Technica Equipment Motor rating 8,1 kw/400 Vac-50 Hz, star / deta start sawbade mounted direct on motor shaft Motor speed 3.000 rpm / sawbade speed 3.000 rpm Sawbade
More informationn Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationWe do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
More informationService Manual. Clamps for Bolt-on Arms and Turnafork
Service Manua Camps for Bot-on Arms and Turnafork Seria Numbers 634448 through 666419 Basic Camps Sideshifting Camps Revoving Camps Turnafork Mode C4T Manua Number 667447 cascade@ Cascade is a registered
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More information1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationGroovers. TCT Groovers Light Duty 4 Wing. TCT Undercut Groovers 4 Wing. Premier Groovers 93 G407/LDTA
Groovers TCT Undercut Groovers 4 Wing UG TCT Groovers Light Duty 4 Wing G407/LDTA UG10 Groover can be used for fitting fire proof strip. Radiused groovers are made to order. Tips can be rounded over to
More informationUNIVERSAL. Glass preparation details. General information, Universal pinch free 24. General information, maximum measurements 8
UNIVERSAL General information, maximum measurements 8 General information, Universal pinch free 24 Glass preparation details Universal pinch free 38 Type selection 9 Patch fittings Universal 0 Connectors
More informationLocker and cloakroom furniture
Locker and coakroom furniture F urnishing with stee furniture Take a ot of wear and tear! Assembed box ockers S 4000 The sturdy cassic ockers with many different compartment sizes... Durabe stee structure
More informationOur policy is one of continuous research and development. We therefore reserve the right
Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can
More informationPrecision Aluminum Nosepieces Index
Aluminum Nosepiece Index Precision Aluminum Nosepieces Index TYPE II REGUAR STYE TYPE II COOANT STYE REGUAR STYES...FOR MOST MAKES AN MOES OF POSITIVE FEE RI TYPE I QUACKENUSH TYPE O-12 Aluminum Nosepieces
More informationModel TWS. Swirl Diffusers
Mode TWS Swir Diffusers Mode TWS Advanced Air s new range of high performance TWS ceiing swir diffusers have been designed to deiver the high air change rates required to meet the demand of high oads.
More informationRANGER COUPLINGS RANGER COUPLINGS
RANGER COUPINGS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. ecause of the
More information1980 Rotating Cam Limit Switches. Ordering Guide & Technical Information
1980 Rotating Cam imit Switches Ordering Guide & Technical Information Features Precision Cam adjustment at any angular position of the Camshaft Speeds from 0 to 500 RPM in either direction No special
More informationCATALOG 2016 SERIES 1
CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
More informationCHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE
CHECK VAVE P.47 P.49 P.5 P.53 P.55 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 45 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. Pressure
More informationMounting a) 2 x M 5 screws, adjustment via elongated. b) 2 x M 5 screws for safety applications without additional attachment
Meta-bodied imit sitches ENM Standard sitch according to DIN EN 50041 Protection cass IP 65 Y Increased number of sitching functions for safety appications Gavanicay separated contacts Forced disconnection
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationHigh temperature sensors
Certificata IO 92 EI s.r.l. - via Milano, 11-22 ainate (MI) Tel.: (2) 937868 / 937342 - Fax: (2) 9371724 Home page: www.elsi.it e-mail: info@elsi.it High temperature traight thermocouple M1 with ceramic,
More informationASSEMBLY AND INSTALLATION
ASSEMBY AND INSTAATION STRAIGT AND EVE GUARDRAIING (using Tpes 10, 15, 20, 21, 25 & 26) Where: = distance between centres of uprights I = ength of horizonta tube = distance from ground to centre ine of
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationEX-(SUS) SERIES. TiN-coated HSSE precision drills EX-SUS-GDS EX-SUS-GDR EX-GDS EX-GDR
EX-(U) ERIE TiN-coate HE precision ris EX-U-G EX-U-GR EX-G EX-GR X Key features: EX-U eries EX-U-GR 485 sizes increments of 0.01 from 2.0-6.0mm EX-U-G Wie variety of in-between sizes 635 sizes, increments
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More information--... Need a prototype tomorrow? Experts in customization, innovative design and engineering
. Hay!J.~!!., kerk " Experts in customization, innovative design and engineering Haydon Kerk Motion Soutions has the e
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationCNA. Series. Cylinder with Lock. Suitable for intermediate stops, emergency stops and drop prevention. ø40, ø50, ø63, ø80, ø100
Suitabe for intermediate stops, emergency stops and drop prevention Simpe construction force magnifying mechanism is empoyed based on the wedge effect of the taper ring and stee bas. Cyinder with Lock
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationScrew-in Thermocouples
TT30..39 s Application Thermocouples are suited for direct temperature measurement of gaseous and liquid media. The applications of the measuring inserts are not limited to the specified thermocouples.
More informationTD3 Series UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE TD3-1-UN-65 TD3-3-UN-65
TD3-1-UN-65 TD3-3-UN-65 RETROFIT INSTALLATION GUIDE UNIQUE LIGHTING SOLUTIONS WARNING Retrofit instaation must ony be performed by a icensed eectrician. To prevent death, injury or damage to property this
More informationPROTECTRON MACHINED CONTACT CONNECTORS
PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON INTRODUCTION INNER CLIP The inner cip consists of 4 Leaf Springs, stamped and rounded to take strip/round mae contacts at the bottom edge, faciitating
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationPART WEIGHT AND DIMENSIONS REFERENCE TABLE
pistons and cylindrical parts that are manufactured with a flange. TRANSDUCERS AND MODUAR MEASURING SYSTEM Quick Set is a retoolable modular system that can be assembled in three different gauging configurations:
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationPUSH BUTTON BOXES AND TERMINAL BOXES
EN PUSH BUTTON BOXES AND TERMINA BOXES PUSH BUTTON BOXES AND TERMINA BOXES 4 PUSH BUTTON BOX MODE APH 8 12 TERMINA BOX MODE ADH slotted and hex screws supplied loose silicone gasket in compliance with
More informationFASTENERS BOLTS AND SCREWS NUTS MACHINE SCREWS WASHERS TAPPING AND WOOD SCREWS CHIPBOARD THREADED RODS AND PINS, RIVETS AND OTHERS ANCHORS
FASTENERS BOTS AND SCREWS NUTS MACHINE SCREWS WASHERS TAPPING AND WOOD SCREWS CHIPBOARD PINS, RIVETS AND THREADED RODS AND ANCHORS OTHERS C/ Nuva, 35 02002 Albact (Spain) tl:+(34) 967 221 602 fax:+(34)
More informationInnovation. Simplicity. is Simply Better. Rotary Lobe Pumps
Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured
More informationHigh-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
More informationSuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
More informationCATALOG 2017 SERIES 1
CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More information