High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C

Transcription

1 High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control cone (series V40) with rising rotating stem, with flanges or butt weld ends, with non-asbestos gland packing and gasket Meets the requirements of the Directive 2014/68/EU, EN LONG SERVICE LIFE - SEATS ARE HARD FACED WITH WEAR RESISTANT AND CORROSION PROOF CR METAL OR STELLITE EASY MAINTENANCE - THE SEAT CAN BE EASILY REPAIRED THANKS TO CONVENIENT ACCESS AND FLAT SEAT DESIGN CUSTOMER RELATED SOLUTION DESIGN VARIANTS AND MATERIALS COMBINATION ON REQUEST, DIFFERENT CONNECTION TYPES, CORROSION RESISTANT MATERIALS FOR AGGRESSIVE FLUIDS BASIC PARAMETERS TYPE High-pressure shut-off globe valve V30 and shut-off globe valve with control cone V40 PN 63, 100, 160 DN 50, 65, 80, 100, 125, 150 APPLICATION Water, steam, gas, oil, crude oil products, non-aggressive substances OPERATING TEMPERATURE [ C] BODY MATERIALS OTHER MATERIALS ON REQUEST CONNECTION FACE-TO-FACE DIMENSIONS OPERATION * We reserve the right to make design changes without any previous announcement , , (to ČSN ), GX5CrNiMo (1.4408) and other DESIGN Shut-off globe valve Rotating rising spindle hand wheel flat seat shut-off cone BASIC DESIGN OPTIONS Non-rotating stem Throttle cone Control cone (for rough control) series V40 Pressure relief cone With electric actuator Other designs of flanged and Butt-weld ends on your request Weld on connection branch from different forged materials Position indicator Butt weld ends, flanged, EN, ČSN, DIN Butt weld ends acc to EN 12982, DIN 3202 or customers request Flanged acc. to EN 558 Hand wheel, electric actuator, other on request seats hard faced with wear resistant and corrosion proof 13 Cr metal or stellite with non asbestos gland packing and gasket testing acc to. EN Position switch PTFE stuffing box and packing By-pass Free of oil and grease Threaded bush free from non-ferrous metals Locking device Other testing requirements on request Delivery according to AD 2000 Merkblatt A4, TRD 110, TRD 201, GOST-R and other standards on request 1

2 PRESSURE-TEMPERATURE-RATINGS Material PN Admissible operating pressure PS [bar] at operating temperature TS [ C]

3 MATERIALS: Pos. Part Material Body 1 Body seats 13Cr Stellite 6 2 Yoke P250GH 13CrMo4-5 Disc 3 (1.0460) (1.7335) Dics seats 13Cr Stellite 6 4 Stem X20Cr13 X22CrMoV12-1 (1.4021) (1.4923) 5 Gasket Graphite Kammprofil 6 Stuffing box packing Graphite 7 Gland 8 Gland-neck bush 10 Stud 11 Hex. nut 12 Handwheel 13 Connection branch 21CrMoV5-7 (1.7709) 25CrMo4 (1.7218) P250GH; 16Mo3 (1.0460; ) EN-GJS (0.7040) 21CrMoV5-7 (1.7709) 21CrMoV5-7 (1.7709) 16Mo3; 13CrMo4-5 (1.5415; ) 3

4 DESIGN VARIANTS: V30 DN50 V30 DN V40...DN V40 DN DESIGN WITH ACTUATOR DESIGN FOR ROTARY ACTUATOR 4

5 Nominal pressure Nominal size Stroke Hand wheel Face-toface Cemtre/-totop-height Assembly dimension Number of bolt holes Bolt hole diameter Bolt pitch circle Flange Flange thickness Raised face Weight appr. High-pressure shut-off globe valve V30, PN VALVE DIMENSIONS: Flanged Face-to-face dimensions: EN 558 line 2 Flanges: EN (DIN 2501/1972) Raised face: EN Form B1 (previously DIN 2526/1975 Form E) Design variants on request: Flanges design on request: Other flanges design variants on your request. ČSN , and other grooved or tongue type EN Form C or Form D (previously DIN 2512/1975 Form F or Form N), recessed or spigot type EN Form E or Form F (previously DIN 2513/1966 Form V13 or Form R13), etc. PN DN L1 z ødk h h4 ød øk ød b ød4xf m n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] x x x x x x x x x x x x x x x x x x

6 Nominal size Face-to-face with out connection branches Face-to-face with connection branches Stroke Hand wheel Centre-to-top Assembly dimension High-pressure shut-off globe valve V30, PN VALVE DIMENSIONS Weld ends Face-to-face dimensions with out connect. branches: EN Line 65 (DIN 3202-Part2 Line S3), DN50 = 260mm as per table on your request Face-to-face dimensions with connection branches: Weld ends: DIN 3239 Part 1 Groove form: DIN 2559 Sheet 1, Form 22 Socket weld: B16.11, DIN 3239-Part 2 On your request: ČSN , EN , and other Butt-weld ends acc. to DIN Groove forms acc. to DIN 2559 Sheet 1, Form 22 Pipe dimension PN 63, 100 PN 63 PN100 PN160 PN 63 PN100 PN160 DN L Lb z ødk h h4 ød 2 ød 0 ød 0 ød ,5 60,3x3,2 60,3x3,2 60,3x ,1x3,6 76,1x3,6 76,1x5, ,5 88,9x4,0 88,9x4,0 88,9x6, ,5 114,3x5,0 114,3x5,0 114,3x , ,5 139,7x4,5 139,7x6,3 139,7x /600 *) , ,5 168,3x5,6 168,3x7,1 168,3x12,5 *) 600 mm for PN160 Weight approximated m [kg] DN PN 63 PN100 PN

7 VALVE DESCRIPTION CODE V DN / NPS PN/ CLASS BODY / BONNET STYLE 1 Vertical TYPE OF CONNECTION 1 Flanged 2 Weld ends 8 Combination 9 - Other OPERATION 1 Hand wheel 2 Gearbox 3 E-actuator 4 attachment for pneumatic or hydraulic actuator 5 - remote control 6 others BODY MATERIAL 2 alloyed steel casted G17CrMo (max. 550 C) 5 carbon steel casted GP 240GH (max. 450 C) VALVE TYPE V - GLOBE VALVES 30 Shut off valve 40 Control valve VALVE INSTALLATION: Valve can be installed in any position. Medium has to enter the valve in correspondence with the arrow marked on the valve body. During the installation and use of the valve following points have to be respected - Maximum working parameters mustn t exceed the maximum values from the table above. - Right function and service life duration of the valve depends on presence of impurities in the medium. Keep the medium and piping clean by use of strainers - Medium has to be in correspondence with the corrosive resistance of the valve - The valve must not be mechanical damaged during its service life Duration of service life depends on regular maintenance. 7