Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
|
|
|
- Kristina Wilcox
- 5 years ago
- Views:
Transcription
1 PN Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, Praha 4, CZ T: , F: E: info@mpowergroup.eu, W:
2 Content Application... 3 Technical description... 3 Connection... 3 Testing... 3 Installation... 3 Control... 3 Operating data... 4 Materials of main parts... 5 Dimensions... 7 Surfacing of the wedge and seats sealing surfaces... 8 Accessories... 9 Copyright All rights reserved. No content provided herein may be copied, distributed or otherwise reproduced without previous written approval of the company MPOWER Engineering, a.s. MPOWER Engineering, a.s., Praha 2015 Contact MPOWER Engineering, a.s. Pod vinicí 2028 / Praha 4 Modřany, CZ T: F: E: info@mpowergroup.eu W: PN page 2 / 7
3 Application Shut-off device designed to fully open or close the flow of the medium, not suitable for throttling or regulating Operating agents Water, steam, oil and oil products, natural gas, gas condensate, saturated and overheated steam, technological solutions, liquefied gases and other neutral and aggressive gases and liquids. The medium must not have a high content of solid and abrasive contaminants that can damage the sealing surface of the valve, or excessively wear inner surface of the gate vavle, especially sealing surfaces of the seats and wedges Industry Energy, chemicals, petrochemicals, gas metallurgy Environment Normal, tropical, explosive, seismic Technical description Yoke gate valve with full flow Body and lid made of cast steel Non-rotating rising stem, non-rising handwheel. Valves with DN 150 or more have a spindle nut with ball bearing, which reduces torque and improves the gate valve control Seats in the body and sealing surfaces of the wedge are hardfaced with alloy: 13Cr, Stellite 6 Flexible wedge of the gate valve (see picture) increases the adhesion to the seats and ensures higher tightness of the gate valve Tightness class "A" in both directions 12627, flanged according to EN , or on demand Building laengths of the gate valves according to EN On demand, the gate valves can be delivered also with other building length and with connection according to different standards (e.g. ASME, GOST, API atd). Testing Gate valves are tested with water for strength, impermeability, operational capacity and tightness depending on the operating parameters and material of the body according to EN Minimum pressure for the strength test 1.5 x PN Minimum pressure for the leakage test 1.1 x PN Gland space packing and sealing between the body and the lid is made of asbestos-free material Sealing between the body and the lid is made of expanded graphite with reinforcement made of stainless steel 304 Gland packing material is expanded graphite Gate valves can be equipped with a back seat, which makes it possible to additionall seal the leaks around the stem during operation Valves without a bypass for the full pressure gradient (on demand, they can be equipped with a bypass (with one or two valves) Flanged gate valves with integral flanges and body Connection Gate valves with but-welded ends according to EN- Installation Gate valves are installed in any position regardless of the direction of flow of the working fluid For electrically actuated valves, it is necessary to ensure compliance with the manufacturer's instructions of the actuator Control Hand wheel (when closing rotates clockwise) Front gear Electric servo motor (in the end position closed is switched off from the torques, in the position otevřeno is switched off from the set position) On demand, the gate valves can be delivered only with the preparation for connection to the actuator. Connection dimensions according to ISO 5210, form B1 PN page 3 / 7
4 Operating data Material of body PN Working pressure MPa / Working temperature C (WCB) LC (WC6) (CF8M) (A217 WC9) (A217 C12A) 16 1,46 1,43 1,38 1,32 1,22 1,17 1,09 0, ,29 2,23 2,16 2,06 1,91 1,82 1,7 1, ,66 3,57 3,46 3,29 3,06 2,92 2,72 2, ,77 5,62 5,45 5,19 4,81 4,59 4,29 3, ,15 8,92 8,65 8,23 7,64 7,29 6,81 5, ,47 1,42 1,4 1,36 1,33 1,27 1, ,84 1,77 1,74 1,7 1,66 1,59 1, ,68 3,55 3,49 3,4 3,32 3,18 2, ,79 5,59 5,49 5,35 5,22 5,0 4, ,19 8,87 8,72 8,5 8,29 7,94 7, ,63 1,57 1,51 1,46 1,35 1,27 1,15 1,11 1,07 0,8 0,57 0,4 0, ,54 2,45 2,37 2,28 2,11 1,98 1,8 1,73 1,67 1,24 0,9 0,63 0, ,06 3,93 3,79 3,64 3,38 3,18 2,89 2,77 2,67 1,99 1,43 1,0 0, ,4 6,19 5,96 5,74 5,33 5,0 4,55 4,36 4,2 3,14 2,26 1,58 0, ,16 9,82 9,47 9,11 8,46 7,94 7,22 6,92 6,67 4,98 3,58 2,51 1, ,33 1,22 1,13 1,05 1,0 0,96 0,93 0,92 0,91 0,86 0,8 0,76 0, ,08 1,9 1,76 1,65 1,56 1,5 1,45 1,44 1,42 1,35 1,25 1,12 0, ,33 3,04 2,82 2,63 2,5 2,4 2,36 2,32 2,3 2,28 2,16 2,0 1, ,25 4,79 4,43 4,15 3,93 3,79 3,66 3,62 3,59 3,4 3,14 2,97 2, ,33 7,6 7,04 6,59 6,24 6,01 5,81 5,75 5,69 5,4 4,99 4,72 3, ,63 1,58 1,54 1,46 1,35 1,27 1,15 1,11 1,07 0,88 0,68 0,49 0, ,54 2,48 2,41 2,29 2,11 1,98 1,8 1,73 1,67 1,37 1,07 0,76 0, ,07 3,96 3,85 3,66 3,38 3,18 2,89 2,77 2,67 2,19 1,71 1,21 0, ,41 6,24 6,06 5,76 5,33 5,0 4,55 4,36 4,2 3,46 2,69 1,91 0, ,17 9,9 9,63 9,14 8,46 7,94 7,22 6,92 6,67 5,49 4,28 3,03 1, ,63 1,58 1,54 1,46 1,35 1,27 1,15 1,11 1,07 0,89 0,81 0,79 0, ,54 2,48 2,41 2,29 2,11 1,98 1,8 1,73 1,67 1,39 1,27 1,23 0, ,07 3,96 3,85 3,66 3,38 3,18 2,89 2,77 2,67 2,23 2,04 1,97 1, ,41 6,24 6,06 5,76 5,33 5,0 4,55 4,36 4,2 3,51 3,21 3,1 2, ,17 9,9 9,63 9,14 8,46 7,94 7,22 6,92 6,67 5,57 5,09 4,92 3,86 PN page 4 / 7
5 Materials of main parts Pos. Name Materials 1 Body (A (A (A (A (A217 A352 LC1 WCB) WC6) CF8M) WC9) C12A) 2 Wedge (A (A (A (A (A217 A352 LC1 WCB) WC6) CF8M) WC9) C12A) 3 Seat 13Cr/Stellite 13Cr/Stellite 13Cr/Stellite 13Cr/Stellite Stellite Stellite 4 Stem X20Cr13+QT X20Cr13+QT X20Cr13+QT A182 F316 25CrMoV 25CrMoV 5 Gasket stainless steel 304 stainless steel 304 stainless steel 304 stainless steel 316 stainless steel 304 stainless steel Nut A194 2H A194 7 A194 4 A194 8M A194 4 A Eyebolt A193 B7 A193 B7 A193 B16 A193 B8M A193 B16 A193 B16 8 Bonnet (A216 WCB) A352 LC (A217 WC6) (A351 CF8M) (A217 WC9) (A217 C12A) 9 Packing ring Graphite Graphite Graphite Graphite Graphite Graphite 10 Packing gland (A216 WCB) A352 LC (A217 WC6) (A351 CF8M) (A217 WC9) (A217 C12A) 11 Eye bolt A193 B7 A193 L7 A193 B16 A193 B8M A193 B16 A193 B16 12 Haxegon nut A194 2H A194 7 A194 4 A194 8M A194 4 A Lubricall fitting Cu Cu Cu Cu Cu Cu 14 Stem nut GGG40.3 GGG40.3 GGG40.3 GGG40.3 Cu Cu 15 Threaded nut C.S C.S C.S S.S C.S C.S 16 Handwheel 17 Bearing C.S C.S C.S S.S C.S C.S 18 Flange (A105) (A105) (A105) (A105) (A105) (A105) PN page 5 / 7
6 Gate valves K03, DN , PN , with hand wheel v Flanged type Welded type Gate valves K03, DN , PN , with electrical actuator and gears v Gate valve with actuator Gate valve with gear Notes: Dimension "Z": acc. to manufacturer s specification of the selected valve control type. PN page 6 / 7
7 Dimensions L H V DN PN FL BW F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F H1 ISO 5210 Mk Nm m kg PN page 7 / 7
8 L H V DN PN FL BW F F F F F F F F F F F F F F F F F F F F F F F F F F Surfacing of the wedge and seats sealing surfaces H1 ISO 5210 Seats in the body and sealing surfaces of the wedge are hardalloyed according to the body materiál and the valves dimensions: PN DN Body material Surfacing type Mk Nm Surfacing on the wedge m kg Surfacing on the seat WCB, LC1 TRIM 1 13Cr 13Cr WCB, LC1 TRIM 8 13Cr Stellite CF8 TRIM 8 13Cr Stellite WC6 TRIM 5 Stellite 6 Stellite WCB, WC6 TRIM 5 Stellite 6 Stellite 6 PN page 8 / 7
9 Accessories On demand, the following accessories can be ordered for the valves: Valve bypass (with one or two shut-off valves) Back Seat Remote control including stands, chains and wheels Pressurized stuffing box for the valves used for vacuum PN page 9 / 7
10 Locking device Extension rings of forged steel 16Mo3, 13Cr, Steel 20 (Cталь 20) and other carbon low-alloyed or high-alloyed steel Position transmitters (only open or closed, or both positions: open and closed) Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, Praha 4, CZ T: , F: E: info@mpowergroup.eu, W:
Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015
PN 63 400 Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300,
GATE VALVES S 38 APPLICATION
APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C
High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
Gate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
FASANI PRESSURE SEAL CAST GLOBE VALVES - STYLE B Y AND T PATTERN
A wide range of globe valves specifically designed for high pressure and high temperature applications, where low pressure loss is required. FEATURES GENERAL APPLICATION Our pressure seal globe valves
Bolted Bonnet Valves. (BL Series) Cast Steel. Cast Steel Bolted Bonnet Valves - BL Series
Cast Steel Bolted Bonnet Valves (BL Series) Gate Valve - BL5 Series Gate Valve Features Globe Valve - BL6 Series Globe Valve Features Swing Check Valve - BL7 Series Optional Features Model Numbers GATE
ECOLINE GTC Type Series Booklet
Gate Valve ECOLINE GTC 150-600 Class 150-600 NPS 2''-36'' Cast Steel / Stainless Steel Bolted Bonnet Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet ECOLINE GTC 150-600
The bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
technical description:
The gate valves are used as the closing valves for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products Operating parameters are in accordance with the standard ASME
Gate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
HANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
TRIPLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.8
α TRIPLE-ECCENTRIC UTTERFLY VALVES TYPE L32.8 Application Triple-eccentric butterfly valves are industrial valves, which designed to fully open or close the passage of the working medium flowing through
Gate valve S38 PN , DN , T max : 540 C
Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
Gate, Globe & Check Valves Corrosion-resistant
Gate, Globe & Check Valves Corrosion-resistant ASME Class 0 to 00 " - " (0 mm - 00 mm) API 0, ASME B. L&T Valves Trusted by the industry for over five decades, L&T Valves offers innovative products and
CAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.
Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
KO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
HANCOCK 600 GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK 600 GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
HANCOCK GATE, GLOBE AND CHECK VALVES CAST STEEL
ANCOCK GATE, GOBE AND CECK VAVES CAST STEE A range of ASME Class 150, 300 and 600 bolted bonnet cast steel valves, with metal-to-metal seating in flanged or butt weld ends FEATURES Gate valves Internal
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.
The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications. Features Swing check valves can fit on both horizontal and vertical (up-flow) piping.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications
The GACHOT V501 gate valve offer the most possible reliability for process and critical applications Features Construction complies with NF EN 1984 Straight-through flow and full port Cast body (investment
Bolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
GA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005
GWC Italia Proven technology for individual valve solutions worldwide forged STEEL VALVES GATE, GLOBE & CHECK FSV-1005 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w w. g w
ECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
Series Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features
Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. Features General application Designed for ASME boiler and pressure vessel code, section I applications
STAAL 40 AKD/AKDS Type Series Booklet
Gate Valve STAAL 40 AKD/AKDS PN 10-40 DN 50-600 Type Series Booklet Legal information/copyright Type Series Booklet STAAL 40 AKD/AKDS All rights reserved. The contents provided herein must neither be distributed,
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
arflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
NORI 320 ZXSV Type Series Booklet
Globe Valve NORI 320 ZXSV PN 250-320 DN 10-50 Type Series Booklet Legal information/copyright Type Series Booklet NORI 320 ZXSV All rights reserved. The contents provided herein must neither be distributed,
Fig. VC900PS Design: ASME B16.34
Gate Valves Class 900 DN 50-500 (2 20 ) Carbon, Alloy and Stainless Steel PDS JC-900PS Rev.3 Fig. 900PS Design: ASME B16.34 JC Fábrica de válvulas, s.a. E-Mail: jc@jc-valves.com Internet: www.jc-valves.com
w w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.
A trusted name in industrial valve company FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.34 CATALOG NUMBER FFI -1004 TABLE OF CONTENTS
KVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
AKG-A/AKGS-A. Type Series Booklet
AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Pressure seal bonnet Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A KSB Aktiengesellschaft Pegnitz All rights
SICCA SCC Type Series Booklet
Swing Check Valve SICCA 150-600 SCC Class 150-600 NPS 2-24 Inches Type Series Booklet Legal information/copyright Type Series Booklet SICCA 150-600 SCC All rights reserved. The contents provided herein
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
H i g h P r e s s u r e V a l v e
High Pressure Valve HIGH PRESSURE VALVES Applications & Specifications Range Gate Valve Advantages STRACK has designed and manufactured high pressure valves for over 35 years. Currently more than 3000
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
AKG-A/AKGS-A Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS
ANSI GATE, GLOBE AND CHECK VALVES & STRAINERS INDEX 2 8 16 20 32 36 44 50 54 58 62 66 78 THE COMPANY CAST GATE VALVES CAST GATE VALVES PRESSURE SEAL CAST GLOBE VALVES CAST GLOBE VALVES PRESSURE SEAL CAST
Large bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API
Large bore valves Powergeneration / petrochemical industries Medium & high-pressure valves in accordance with ASME, EN, BS and API An introduction to Key Valve Technologies Ltd. Key Valve Technologies
GWC Italia. Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004
GWC Italia Proven technology for individual valve solutions worldwide CAST STEEL VALVES GATE, GLOBE & CHECK CSV-1004 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide
AKG-A/AKGS-A. Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
GL-1601C (EN) GLOBE VALVE
GL1C (EN) GLOBE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
Series Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves
Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges
Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through
Sempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
YARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
NORI 500 ZXLR/ZXSR. Type Series Booklet
Globe Valve NORI 500 ZXLR/ZXSR PN 250-500 DN 10-50 With Gland Packing With Back Seat Flanged or with Butt or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 500
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam
The globe valves are used as a closing valve for: - noncorrosive fluids - saturated steam - oil - air - petroleum and petroleum products The Characteristics of working conditions: pressure dependency on
Sempell High Pressure Stop Valves Model VA500 (ASME)
7 Sempell High Pressure Stop Valves Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features
Cast Steel Globe Valve
www.itek.com 07 Category Globe Valve - BS1873-Specification Cast Steel Globe Valve Figure:DIDTEKCSGLV Ditek Cast steel Globe Valves are manufacture to the latest eitionof BS1873an teste to API Stanar 598.
Gate, Globe and Check Valves
Gate, Globe and Check Valves 1 COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged
VB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
Sempell High Pressure Stop Valves Model VA500 (DIN)
Designed for the isolation and control of high temperature and high pressure systems, this multipurpose globe valve can be used in a wide variety of applications. Features Type tested (except for material
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
Cast Steel Valves. General Index. Figure Number Index -1-
Cast Valves General Index Cast Valves Ordering Information... 2 General Data... 3 Materials... 4 Identification... 5 General Features... 6 Gate Valve Features... 7 NACE Trim Valves...11 Globe Valve Features...12
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW
METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple
Triple Eccentric Control and Shut-off Butterfly Valve Series 14t
Application: Triple Eccentric Control and Shut-off Butterfly Valve Series 14t Triple eccentric butterfly valve providing excellent shut-off in all industrial applications: Nominal size DN 80 to DN 400
ASME Classes /2 24 ( mm) Class /2 1 1 /2 (15 40 mm)
ASME Classes 150 300 1 /2 24 (15 600 mm) Class 800 1 /2 1 1 /2 (15 40 mm) PROFILE Velan is one of the world's leading manufacturers of industrial valves, supplying forged and cast steel gate, globe, check,
L&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
D1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
WENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
Compact Expanding Gate. Double Disc Parallel Slide ORION STEEL VALVES API 6D API 600
ORION STEEL VALVES Compact Expanding Gate API 6D Double Disc Parallel Slide API 600 PARALLEL SLIDE COMPACT EXPANDING GATE API 6D - DOUBLE DISC PARALLEL SLIDE API 600 - p. 155 Class ASME 150 (PN 20) 300
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
SERVICE FEATURES CAST STEEL VALVES PRODUCTION RANGE PRODUCTION MATERIALS. Class Type UNIT : NPS GATE
API 600 Cast Steel Valves 1 SERVICE FEATURES Several trim combinations available for various services. Straight-through port design offering a good flow with minimum frictional loss and turbulence. Cast
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
OSV. Forged Steel Valves Technical book OSV
OSV Forged Steel Valves Technical book OSV Principles Of Company General Introduction Company History About the company OS Valves (OSV) is a subsidiary of OS Company. OSV has been inspiring our employees
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
GWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003
w w w. g w c i t a l i a. c o m GWC Italia Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003 1 1 GWC ITALIA Proven technology for individual valve solutions
Type. Type 457, , 458. Flanged Safety Relief Valves spring loaded
Type Type 458 Packed lever H4 Closed bonnet Conventional design 457, 458 Flanged Safety Relief Valves spring loaded Contents Chapter/Page Materials Conventional design 09/02 Balanced bellows design 09/04
Proven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
BUTTERFLY VALVE TRIPLE ECCENTRIC BUTTERFLY VALVE
Triple Eccentric Butterfly Valve provides a tight shut-off performance. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without rubbing or galling, providing
M Series Floating Metal Seat Ball Valve
M Series Floating Metal Valve 1 M Series Floating Metal Valve Full Bore Two-piece Flanged Ends ANSI 150/300/600LB The A-T Controls M Series metal seat ball valve is designed for use in severe services
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
VALVES AIL CAST STEEL GATE, GLOBE & CHECK AUDCO INDIA LIMITED. ASME Class mm mm (2-60 ) API 600 BS 1873 BS 1868 API 603
AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1500mm (2-60 ) API 600 BS 1873 BS 1868 API 603 ASME B16.34 API 6D AUDCO INDIA LIMITED Introduction AIL Cast Steel Gate, Globe and Check
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
Forged Steel Valves Comparison Chart 1. Standard material Specification 2. Figure Number 3. Gate Valves 4-5. Globe Valves 6-7. Y-Globe Valves 8-9
INDEX Forged Steel Valves Comparison Chart 1 Standard material Specification 2 Figure Number 3 Threaded, Socket Welded & Butt Welded Ends Gate Valves 4-5 Globe Valves 6-7 Y-Globe Valves 8-9 Check Valves
AIL METSEAL Butterfly Valves
AIL METSEAL Butterfly s The AIL METSEAL Butterfly is a high performance valve which is used for positive isolation in Power Generation, Petroleum Refining, Oil and Gas Production, Chemical, Petrochemical
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
TECHNICAL DATASHEET Pacific CSV Cast Steel Valves
brands you trust. TECNICA DATASEET Pacific CSV Cast Steel Valves Crane ChemPharma & Energy Gate, Globe and Check Features and Benefits The new Pacific CSV valves have been redesigned to improve performance
Bulletin B Piston Valves
B06-15.qxp 1/07/2006 9.50 Pagina 1 Bulletin B06-15 BON E T T I Piston Valves B06-15.qxp 1/07/2006 9.50 Pagina 2 INDEX Page Rating...2 General Information...4 Construction Details...5-6 Straight Pattern
CONTROL VALVE BELLOWS SEALED
APPLICATIONS & DESIGN FEATURES FIG. NO. 350EC9 /... APPROVAL No. 03/01 APPLICATIONS MODEL 350EC8/9 IS DESIGNED FOR FLOW CONTROL IN CRITICAL SERVICE APPLICATIONS INVOLVING LETHAL, TOXIC, CORROSIVE, INFLAMMABLE,
NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,