High pressure strainer D71.2

Size: px
Start display at page:

Download "High pressure strainer D71.2"

Transcription

1 High pressure strainer D71.2 PN , DN 20 50, T max : 600 C High-pressure strainer D71.2 with flanges or butt weld ends,strainer insert made of stainlees steel, with nonasbestos gasket. Meets the requirements of PED 97/23/EC. EASY MAINTENANCE - THE SEAT CAN BE EASILY REPAIRED THANKS TO CONVENIENT ACCESS AND FLAT SEAT DESIGN CUSTOMER RELATED SOLUTION DESIGN VARIANTS AND MATERIALS COMBINATION ON REQUEST, DIFFERENT CONNECTION TYPES, CORROSION RESISTANT MATERIALS FOR AGGRESSIVE FLUIDS STRAINER INSERT FOR DIFFERENT MEDIA BASIC FEATURES TYPE D High pressure strainer PN 63, 100, 160, 250 DN 20, 25, 32, 40, 50 MEDIUM Water, steam, gas, oil, crude oil products, non-aggressive and aggressive substances WORKING TEMP. [ C] ) BODY MATERIAL MATERIAL ON REQUEST TYPE OF CONNECTION P250GH (C 22.8) (1.0460) 16Mo3 (1.5415) 13CrMo4-5 (1.7335) 11CrMo9-10 (1.7383) 14MoV6-3 (1.7715) (to ČSN ), (to ČSN ) and other on your request Flanged, butt weld, socket weld and threaded end acc. to DIN, EN, ČSN. X6CrNiMoTi (1.4571) FACE-TO-FACE DIMENSION Per table, see page 5, 6 DESIGN BASIC DESIGN VARIANTS High-pressure strainer: straight way pattern drain plug with non asbestos gasket Other designs of flanged and Butt-weld ends on your request Weld on connection branch from different forged materials PN DN PURCHASE ORDER DATA Operating pressure and temperature Material of body Pipe connection We reserve the right to make design changes without any previous announcement. mesh standard 56 meshes/cm 2 (min. 12, max. 500 meshes/cm 2 ) with non asbestos gasket Testing acc. to ČSN EN (1.5xPN body and 1.1xPN seat) Other testing requirements on request Delivery according to AD 2000 Merkblatt A4, TRD 110 and other standards on request Other on you request Size of mechanic impurities Fluid, concentration and temperature Variants Type Next technical requirements 1) Aplication over 400 C only for medium, which does not cause the intercrystalline corrosion. 1

2 PRESSURE-TEMPERATURE RATINGS Material P250GH (C22.8) (1.0460) Maximum working pressure [bar] for working temperature TS [ C] PN ,7 53,2 50,4 44,9 41,0 40,2 39,4 38,4 37,5 36,5 35,6 34, ,0 84,5 80,0 71,3 65,0 63,8 62,5 61,0 59,5 58,0 56,5 55, ,6 95,2 92,8 90,4 88, Material 16Mo3 (1.5415) 13CrMo4-5 (1.7335) 2) 11CrMo9-10 (1.7383) 14MoV63 (1.7715); (ČSN415128) X6CrNiMoTi (1.4571) 1) PN Maximum working pressure [bar] for working temperature TS [ C] ,7 52,9 50,4 44,1 36,5 25,7 20,4 16, ,8 32,4 25, ,8 65,3 51,8 41, , ,7 55,3 52,3 50,4 40,3 32,8 27,1 21,2 17,0 10, , ,0 43,0 33,6 27,0 16, ,2 68,8 53,8 43,2 26, ,5 41, ,7 54,2 51,7 50,4 40,3 35,3 30,2 26,5 22,7 16,4 15,1 11, ,0 86,0 82,0 80,0 64,0 56,0 48,0 42,0 36,0 26,0 24,0 18, ,6 76,8 67,2 57,6 41,6 38,4 29, ,0 65,0 60,0 46, ,4 40,3 40,3 40,3 40,3 40,3 40,3 40,3 40,3 40,3 40,3 40,3 31,5 31,5 31, ,0 64,0 64,0 64,0 64,0 64,0 64,0 64,0 64,0 64,0 64,0 64,0 50,0 50,0 50, ,0 80,0 80, ,7 57,9 54,9 53,3 51,4 50,1 50,1 49,9 49,9 49,9 49,6 49,6 49,4 49,1 48,6 40,3 35, ,0 92,5 87,2 84,2 81,6 79,6 79,6 79,2 79,2 79,2 78,8 78,8 78,4 78,0 77,2 64,0 56, , ) Aplication over 400 C only for medium, which does not cause the intercrystalline corrosion. 2) Material only to +570 C 2

3 MATERIALS: Pos. Part Material P250GH 16Mo3 13CrMo4-5 11CrMo Body (C22.8) (1.5415) (1.7335) (1.7383) (1.0460) 2 Drain plug 3 Strainer basketr 4 Cover P250GH (C22.8) (1.0460) X20Cr13 (1.4021) X22CrMoV12-1 (1.4923) X6CrNiTi18-10 (1.4541) X22CrMoV12-1 (1.4923) 5 Gasket graphitte 14MoV6-3 (1.7715) X6CrNiMoTi (1.4571) 1) X6CrNiMoTi (1.4571) X6CrNiMoTi (1.4571) 1) Aplication over 400 C only for medium, which does not cause the intercrystalline corrosion. 3

4 B min. A max. DIMENSIONS Weld, socket weld and threaded ends Face-to-face: acc. to tables Weld ends: DIN 3239 Part 1 Groove form: DIN 2559 Sheet 1, Form 22 Socket weld end: EN (DIN Part 2) On your request: ČSN , ČSN , EN , and other within the B min,a min dimensions. Butt - weld ends, not machined Socket weld ends Butt - weld ends 4

5 Nominal size Face-to-face Centre-to-top Weight approximately Dimensions in mm Butt-weld ends acc. to DIN Groove forms acc. to DIN 2559 Sheet 1, Form 22 PN 63, 100 Socket weld ends to EN (DIN ) PN 160 PN 250 PN Not machined butt weld ends DN L h d 2 d 0 d 2 d 0 d 2 d 0 ØD 1-0,5 øc +0,2 b min A max B min m [kg] , , , ,5 12, , , , , ,5 12, , , , , , , , , , , , , , , , ,4 Pipe dimension DN PN 63 PN 100 PN 160 PN ,2 x 2,0 17,2 x 2,0 17,2 x 2,0 17,2 x 2, ,3 x 2,0 21,3 x 2,0 21,3 x 2,0 21,3 x 2, ,9 x 2,3 26,9 x 2,3 26,9 x 2,3 26,9 x 3, ,7 x 2,6 33,7 x 2,6 33,7 x 3,2 33,7 x 3, ,4 x 2,6 42,4 x 2,6 42,4 x 3,6 42,4 x 4, ,3 x 2,6 48,3 x 2,6 48,3 x 3,6 48,3 x 5, ,3 x 3,2 60,3 x 3,2 60,3 x 4,0 60,3 x 8,0 5

6 Nominal size Face-to-face dimension Number of holes Hole Bolt circle Flanges Flange thickness Raised face Weight approx. Number of holes Hole Bolt circle Flanges Flange thickness Raised face Weight approx. Nominal size Face-to-face dimension Number of holes Hole Bolt circle Flanges Flange thickness Raised face Weight approx. Number of holes Hole Bolt circle Flanges Flange thickness Raised face Weight approx. DIMENSIONS Flanged Face-to-face dimensions: acc. to the tables Flanges: EN1092-1, (DIN 2501/1972) Raised face: EN Form B1, (DIN 2526/1975 Form E) Design variants on request: ČSN , and other Flanges design on request: grooved form EN Form C or Form D (previously DIN 2512/1975 Form F or Form N), recessed or spigot EN Form E or Form F (previously DIN 2513/1966 Form V13 eor Form R13), lens shaped joint type DIN 2698 Other flanges design variants on your request Dimensions in mm PN 63 PN 100 DN L1 n ød øk ød b ød 4xf m [kg] n ød øk ød b ød 4xf m x2 4, x2 [kg] 4, x2 5, x2 5, x2 10, x2 11, x3 11, x3 12, x3 12, x3 13,6 PN 160 PN 250 DN L1 n ød øk ød b ød 4xf m [kg] n ød øk ød b ød 4xf x2 7, x2 8, x3 16, x3 16, x3 20, x3 20,5 m [kg] 6

7 VALVE DESCRIPTION CODE D DN / NPS PN / CLASS BODY / BONNET STYLE 1 Straight-way pattern TYPE OF CONNECTION 1 Flanged 2 weld ends 7 Socket-weld 8 Combination 9 - Other OPERATION 8 Without operating BODY MATERIAL 0 stainless steel X6CrNiMoTi (1.4571) (max. 600 C) 3 alloyed steel forged 16Mo (max. 530 C) 13CrMo (max. 570 C) 11CrMo (max. 600 C) 14MoV (max. 600 C) (to ČSN) (max. 600 C) 4 carbon steel forged P250GH (max. 450 C) (to ČSN) (max. 450 C) VALVE TYPE D - STEAM TRAPS, STRAINERS 71.2 high pressure strainer forged VALVE INSTALLATION: Valve must always be installed in the line position plug down. Medium correspondence with the arrow marked on the valve body. Cleaning strainer basket and strainer insert at every shut-down. During the installation and use of the valve following points have to be respected: - Maximum working parameters mustn t exceed the maximum values from the table above. - Medium has to be in correspondence with the corrosive resistance of the valve - The valve must not be mechanical damaged during its service life Duration of service life depends on regular maintenance. 7

8 Strainer D30, PN Catalogue page 436 High-pressure strainer D30 PN , DN , T max : 550 C High-pressure strainer D30 with flanges or butt weld ends, with non-asbestos gasket Meets the requirements of PED 97/23/EC. THANKS TO CONVENIENT ACCESS AND FLAT SEAT DESIGN CUSTOMER RELATED SOLUTION DESIGN VARIANTS AND MATERIALS COMBINATION ON REQUEST, DIFFERENT CONNECTION TYPES BASIC PARAMETERS TYPE High-pressure strainer D30 PN 63, 100, 160 DN 50, 65, 80, 100, 125, 150 APPLICATION Water, steam, gas, oil, crude oil products, non-aggressive substances OPERATING TEMPERATURE [ C] BODY MATERIALS OTHER MATERIALS ON REQUEST CONNECTION FACE-TO-FACE DIMENSIONS DESIGN BASIC DESIGN OPTIONS Other designs of flanged and Butt-weld ends on your request Weld on connection branch from different forged materials * We reserve the right to make design changes without any previous announcement GP240GH (1.0619) G17CrMo5-5 (1.7357) , , (to ČSN ), GX5CrNiMo (1.4408) and other Butt weld ends, flanged, EN, ČSN, DIN Butt weld ends acc to EN 12982, DIN 3202 or customers request Flanged acc. to EN 558 High-pressure strainer: mesh standard range 23 to 600 straight way pattern meshes/inch drain plug with non asbestos gasket testing acc to. DIN other on request Other testing requirements on request Delivery according to AD 2000 Merkblatt A4, TRD 110 and other standards on request 1

9 h d0 d2 Strainer D30, PN Catalogue page 436 PRESSURE-TEMPERATURE-RATINGS Material GP240GH (1.0619) G17CrMo5-5 (1.7357) PN Admissible operating pressure PS [bar] at operating temperature TS [ C] MATERIALS: Lb L

10 Strainer D30, PN Catalogue page 436 Pos. Part Material 1 Body GP240GH (1.0619) 2 Cover 13CrMo4-5 (1.7335) 3, 4 Strainer X5CrNi18-10 (1.4301) 5 Gasket ST/Isoplan 6 Gasket Grafit 7 Bolt 21CrMoV5-7 (1.7709) 8 Hex nut 25CrMo4 (1.7218) 9 Branch P250GH; 16Mo3 (1.0460; ) 10 Plug 21CrMoV5-7 (1.7709) G17CrMo5-5 (1.7357) 21CrMoV5-7 (1.7709) 16Mo3; 13CrMo4-5 (1.5415; ) 3

11 Nominal pressure Nominal size Face-to-face Cemtre/-totop-height Number of bolt holes Bolt hole Bolt pitch circle Flange Flange thickness Raised face Weight appr. Strainer D30, PN Catalogue page 436 VALVE DIMENSIONS: Flanged Face-to-face dimensions: EN 558 line 2 Flanges: EN (DIN 2501/1972) Raised face: EN Form B1 (previously DIN 2526/1975 Form E) Design variants on request: Flanges design on request: Other flanges design variants on your request. ČSN , and other grooved or tongue type EN Form C or Form D (previously DIN 2512/1975 Form F or Form N), recessed or spigot type EN Form E or Form F (previously DIN 2513/1966 Form V13 or Form R13), etc. PN DN L1 h ød øk ød b ød4xf m n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg] x x x x x x x x x x x x x x x x x x

12 Nominal size Face-to-face dimension Face-to-face dimension with branches Strainer D30, PN Catalogue page 436 VALVE DIMENSIONS Weld ends Face-to-face dimensions with out connect. branches: see the table (EN 12982/65; DIN 3202/2 S3, DN50=260mm) Face-to-face dimensions with connection branches: as per table on your request Weld ends: DIN 3239 Part 1 Groove form: DIN 2559 Sheet 1, Form 22 Socket weld: B16.11, DIN , On your request: ČSN , EN , and other Butt-weld ends acc. to DIN Groove forms acc. to DIN 2559 Sheet 1, Form 22 Pipe dimension Weight approximated m [kg] PN 63, 100 PN 63 PN100 PN160 PN 63 PN100 PN160 PN 63 PN100 PN160 DN L Lb ød 2 ød 0 ød 0 ød ,5 60,3x3,2 60,3x3,2 60,3x ,1x3,6 76,1x3,6 76,1x5, ,5 88,9x4,0 88,9x4,0 88,9x6, ,5 114,3x5,0 114,3x5,0 114,3x , ,5 139,7x4,5 139,7x6,3 139,7x , ,5 168,3x5,6 168,3x7,1 168,3x12, Note: Standard design without connection branches. 5

13 Strainer D30, PN Catalogue page 436 VALVE DESCRIPTION CODE D DN / NPS PN/ CLASS BODY / BONNET STYLE 1 Straight-way pattern TYPE OF CONNECTION 1 Flanged 2 weld ends OPERATION 8 Without operating BODY MATERIAL 0 stainless steel GX5CrNiMo (max. 400 C) 2 alloyed steel - cast G17CrMo (max. 550 C) 5 carbon steel - cast GP240GH (max. 450 C) VALVE TYPE D - STEAM TRAPS, STRAINERS 30 high pressure strainer cast VALVE INSTALLATION: Valve must always be installed in the line position plug down. Medium - correspondence with the arrow marked on the valve body. During the installation and use of the valve following points have to be respected: - Maximum working parameters mustn t exceed the maximum values from the table above. - Right function and service life duration of the valve depends on presence of impurities in the medium. - Medium has to be in correspondence with the corrosive resistance of the valve - The valve must not be mechanical damaged during its service life Duration of service life depends on regular maintenance. 6

High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C

High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN , DN , T max : 550 C High-pressure shut-off globe valve V30 High-pressure shut-off globe valve with control cone V40 PN 63-160, DN 50 150, T max : 550 C Shut-off globe valve (series V30) or shut-off globe valve with control

More information

Gate valve S38 PN , DN , T max : 540 C

Gate valve S38 PN , DN , T max : 540 C Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,

More information

Gate valve S38 PN , DN , T max : 540 C

Gate valve S38 PN , DN , T max : 540 C Gate valve S38 40-100, DN 40 400, T max : 540 C Shut off gate valve with outsidescrew, rising stem, non-rising hand wheel, with bolted bonnet, with flanges or with butt weld ends, flexible or split wedge,

More information

Strainer PN 25/40 DN

Strainer PN 25/40 DN Type series booklet 7127.1/9-10 NORI 40 Strainer with drain plug flanged or with butt weld ends Type FSL Type FSS PN 25/40 DN 15-300 Fields of Application In heat transfer plants, industrial plants, building

More information

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Remarks. Materials

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Remarks. Materials Type series booklet 7161.1/17-10 BOA -H/HE Maintenance-free shut-off globe valves with bellows BOA-H BOA-HE Our bellows globe valves meet the stringent requirements of the German Clean Air Act flanged

More information

Globe valves PN 25/40 DN

Globe valves PN 25/40 DN Type series booklet 7622.1/9-10 NORI 40 Globe valves with gland packing with non-rotating stem flanged or with butt or socket weld ends ZXLF ZXSF PN 25/40 DN 10- Application In industrial plants, building

More information

Maintenance-free shut-off valves PN 25/40 DN

Maintenance-free shut-off valves PN 25/40 DN Type series booklet 7160.1/7-10 NORI 40 Maintenance-free shut-off valves with bellows flanged or with butt weld ends Type ZYLB Type ZYSB PN 25/40 DN 15-300 Fields of Application In heat transfer plants,

More information

ARI-Strainer PN63-160

ARI-Strainer PN63-160 ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +

More information

GATE VALVES S 38 APPLICATION

GATE VALVES S 38 APPLICATION APPLICATION The gate valves of this design are controlled valves used as the shut-off units in the piping system. They can be used for water, saturated and superheated steam, gases, non-aggressive liquids,

More information

STAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data

STAAL 100 Swing check valves PN DN Applications Standard Variants Operating Data Materials Additional Information Purchase Order Data Type series booklet 7371.1/10-10 STAAL 100 Swing check valves with bolted cover flanged or with butt weld ends AKK AKKS PN 63-100 DN 80-400 Applications In industrial plants, power stations, process and

More information

NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design

NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,

More information

Grey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2

Grey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2 CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt

More information

Grey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4

Grey cast iron Fig. 610 Page 2. Forged steel Stainless steel Fig. 610/612 (Y) Page 4 Thermostatic steam trap CONA M Thermostatic steam trap Thermostatic steam trap PN16 - with flanges (Fig. 610...1) - union with butt weld ends (Fig. 610...5) Grey cast iron Fig. 610 Page 2 Thermostatic

More information

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Materials

Maintenance-free shut-off globe valves PN 25/40 DN Standard variants. Application. Operating data. Materials Type series booklet 7165.1/11-10 NORI 40 Maintenance-free shut-off globe valves with bellows with two-piece stem Type ZXLB Type ZXSB Our bellows seal valves meet the requirements of the TA-Luft (German

More information

Grey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6

Grey cast iron Fig. 600 Page 2. Forged steel High temperature steel Stainless steel Fig. 600/601 (Y) DN15-25 Page 4 DN40-50 Page 6 Bimetallic steam trap CONA B Bimetallic steam trap Bimetallic steam trap PN16 - with flanges (Fig. 600...1) - union with butt weld ends (Fig. 600...5) Grey cast iron Fig. 600 Page 2 Bimetallic steam trap

More information

Grey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8

Grey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8 Ball float steam trap CONA S Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt

More information

NORI 320. Globe valves PN DN Applications. Standard variants. Operating data. Additional information. Materials.

NORI 320. Globe valves PN DN Applications. Standard variants. Operating data. Additional information. Materials. Type series booklet 7640.1/6-10 NORI 320 Globe valves with gland packing with non-rotating stem bonnetless, with bajonet-type body / yoke connection flanged or with butt or socket weld ends PN 250-320

More information

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA - Luft TÜV-Test-No. 922-9204866 Grey cast iron

More information

AWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63

AWH ARMATUREN- WERK HALLE GMBH. Thermodynamic steam trap. Thermodynamic steam trap. Thermodynamic steam trap PN40. Thermodynamic steam trap PN63 TD PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3) - with butt weld ends (Fig. 640/641...4) Forged steel High temperature steel

More information

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges

ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.

More information

ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing

ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges

More information

Grey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8

Grey cast iron SG iron Forged steel/ Cast steel Stainless steel Fig. 631 Page 2. High temperature steel Fig. 631 / Fig. 632 Page 8 Ball float steam trap CONA S Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt

More information

ITEM DESCRIPTION FIGURE STOP VALVES

ITEM DESCRIPTION FIGURE STOP VALVES INDEX OF STEEL INDUSTRIAL VALVES ITEM DESCRIPTION FIGURE STOP VALVES 01. STRAIGHT PATTERN STOP VALVES PN 40 DN 15-250 for general application ZPZ 1 with control disc for general application ZPR 1 for petroleum

More information

ARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges

ARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Grey cast iron SG iron Cast steel Fig. 003/303 Page 2 Straight through with flanges Straight through with flanges Angle

More information

Forged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6

Forged steel High temperature steel Stainless steel Fig. 640/641 (Y) Page 2. High temperature steel Fig. 640/641 (Y) Page 6 Thermodynamic steam trap CONA TD Thermodynamic steam trap Thermodynamic steam trap PN40 - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig. 640/641...3)

More information

CONA Further components / Accessories

CONA Further components / Accessories CONA Further components / Accessories Liquid drainer PN16 / PN40 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends (Fig. 665...4)

More information

ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing

ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing ARI-CHECKO -V / -D Check valve ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Straight through with flanges Straight through with flanges Angle pattern with flanges

More information

Forged steel Stainless steel Fig. 60A Page 2. Forged steel Stainless steel Fig. 61A Page 4. Forged steel Stainless steel Fig.

Forged steel Stainless steel Fig. 60A Page 2. Forged steel Stainless steel Fig. 61A Page 4. Forged steel Stainless steel Fig. CONA All-in-one - Steam trap station with integrated inlet and outlet valves CONA All-in-one Steam trap station with integrated inlet and outlet valves CONA B All-in-one Bimetallic steam trap PN40 - with

More information

ARI-FABA -Plus Stop valve with bellows seal

ARI-FABA -Plus Stop valve with bellows seal Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus - Straight through with flanges DIN DVGW-Type approval TA - Luft TÜV-Test-No. 973-10183778

More information

ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat

ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) (optional) Straight through with flanges TRB 801 Annex

More information

RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.

RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME

More information

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50

Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50 Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60

More information

ARI-STOBU PN16-40 Stuffing box valve

ARI-STOBU PN16-40 Stuffing box valve Stuffing box valve Stop valve with gland seal - metallic sealing Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA-Luft TÜV-Test-No. 922-9204866 Grey cast iron SG iron

More information

RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications.

RAIMONDI. High pressure forged check valves recommended to prevent flow reversal in severe applications. Fig. 6042 6045 RAIMONDI High pressure forged check valves recommended to prevent flow reversal in severe applications. Features High quality forged materials to guarantee pressure envelope integrity, all

More information

Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015

Type K12. Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / 2015 PN 63 400 Forged Gate Valve with Pressure Sealed Bonnet Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300,

More information

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends

Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges German "TA-Luft" TÜV-Test-No. 922-9204866 TRB 801 No. 45 (except cast iron) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern

More information

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN

PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2

More information

02. ANGLE PATTERN STOP-CHECK VALVES PN 6, 16, 25 DN , SCREW DOWN, TYPE 31, 32, 33, 41, 42, 43, 53, 63

02. ANGLE PATTERN STOP-CHECK VALVES PN 6, 16, 25 DN , SCREW DOWN, TYPE 31, 32, 33, 41, 42, 43, 53, 63 INDUSTRIAL VALVES INDEX OF INDUSTRIAL VALVES ITEM DESCRIPTION FIGURE STOP CHECK VALVES 01. STRAIGH STOP CHECK VALVES PN 6, 16, 25, 40 DN 15-300, SCREW DOWN, TYPE 31, 32, 33, 41, 42, 43 215 02. ANGLE PATTERN

More information

ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction

ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction ARI-FABA LA Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing - long construction ARI-FABA LA - Straight through with flanges EN ISO 15848-1 / TA - Luft TÜV-Test-No.

More information

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges

PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through

More information

Cast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3

Cast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3 Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges TRB 801 No. 45 (except GG-25) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern with flanges TRB 801 No. 45 Stainless steel

More information

Si Engineering GREAT Solutions. Steam Safety Valves to PED and DIN/EN standards

Si Engineering GREAT Solutions. Steam Safety Valves to PED and DIN/EN standards Engineering GREAT Solutions Steam Safety Valves to PED and DIN/EN standards Engineered specific for HP steam application Features The IMI Bopp & Reuther high pressure steam safety valve: > Solid inlet

More information

High Flow Safety Valves

High Flow Safety Valves High Flow Safety Valves Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards High Flow Safety Valves Valve summary Si 6301 Size DN 20 to DN 150 Set Pressure up to16 bar

More information

Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel.

Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel. Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres Condensate pump No electricity required / float-operated PN 16 (82.691) Body: Jacket P235GH-TC, Bottom flanges

More information

Si 6303 / Si 6304 / Si 6305

Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Features Engineered for high

More information

STRAINER VALVES VARIMEX VALVES CO.LTD

STRAINER VALVES VARIMEX VALVES CO.LTD STRAINER VALVES Features: Aplications VARIMEX VALVES CO.LTD 03-284 Warsaw, Porannej Bryzy 33 St. Poland, Tel.: (48 22) 828 15 31, Fax: (48 22) 828 15 32, e-mail: biuro@varimex-valves.pl; www.varimex-valves.pl

More information

NORI 320 ZXSV Type Series Booklet

NORI 320 ZXSV Type Series Booklet Globe Valve NORI 320 ZXSV PN 250-320 DN 10-50 Type Series Booklet Legal information/copyright Type Series Booklet NORI 320 ZXSV All rights reserved. The contents provided herein must neither be distributed,

More information

SAFETY QUICK SHUT-OFF VALVES FOR OIL. Safety devices with automatic shut-off function ASV DN 15, 20, 25 KVAZ DN 32, 40, 50

SAFETY QUICK SHUT-OFF VALVES FOR OIL. Safety devices with automatic shut-off function ASV DN 15, 20, 25 KVAZ DN 32, 40, 50 SAFETY QUICK SHUT-OFF VALVES FOR OIL Safety devices with automatic shut-off function Production series Nominal diameter ASV DN 15, 20, 25 KVAZ DN 32, 40, 50 KVAZ for high pressure DN 15, 20, 25, 32, 40,

More information

Gate valve, billet-forged. p approx. 600 bar DN Applications

Gate valve, billet-forged. p approx. 600 bar DN Applications Type series booklet 7451.1/11-10 ZTS Gate valve, billet-forged with pressure seal bonnet with butt weld ends p approx. 600 bar DN 50-800 Applications In industrial plants, power stations, process and marine

More information

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries:

COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries: CECK VAVES COMPANY PROFIE The company ARMATURY Group a.s. is a leaing Czech manufacturer an istributor of inustrial valves, fittings an control systems for valves. The annual prouction is of more than

More information

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets

with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page

More information

CONA ANSI Further components / Accessories

CONA ANSI Further components / Accessories CONA ANSI Further components / Accessories Liquid drainer ANSI150 / 300 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends

More information

Cast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4

Cast iron Nodular iron Cast steel BR 003/303 Page 2. Cast iron Nodular iron Cast steel BR 004/304 Page 3. Forget steel BR 030 Page 4 Check valve Straight through with flanges (except GG-25) Cast iron Nodular iron Cast steel BR 003/303 Page 2 Straight through with flanges Forged steel BR 003 Page 2 BR 003 Straight through with flanges

More information

STAAL 40 AKK/AKKS. Type Series Booklet

STAAL 40 AKK/AKKS. Type Series Booklet Swing Check Valve STAAL 40 AKK/AKKS PN 10-40 DN 80-400 Bolted cover Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet STAAL 40 AKK/AKKS KSB Aktiengesellschaft Pegnitz

More information

NORI 40 RXL/RXS. Type Series Booklet

NORI 40 RXL/RXS. Type Series Booklet Non-return Valve NORI 40 RXL/RXS PN 25/40 DN 10-300 Flanged/Butt Weld Ends or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 40 RXL/RXS KSB Aktiengesellschaft

More information

CONA -control Monitoring system for steam traps

CONA -control Monitoring system for steam traps CONA -control - Monitoring system for steam traps CONA -control Monitoring system for steam traps Central status indication External test chamber Bolt-on test chamber Inclusive: - AS-i-Master - Power supply

More information

Excess pressure regulator Excess pressure regulator, straight through DN

Excess pressure regulator Excess pressure regulator, straight through DN ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm

More information

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE

with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure

More information

Materials : Carbon steel or stainless steel

Materials : Carbon steel or stainless steel Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges

More information

Cast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5

Cast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5 ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (except cast iron) ARI-STOBU Globe valve with flanges TRB 801 No.45 Test approvals

More information

NORI 500 RXLR/RXSR. Type Series Booklet

NORI 500 RXLR/RXSR. Type Series Booklet Non-return Valve NORI 500 RXLR/RXSR PN 250-500 DN 10-50 Flanged or with Butt or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 500 RXLR/RXSR KSB Aktiengesellschaft

More information

BOA-H/HE/HV/HEV. Type Series Booklet

BOA-H/HE/HV/HEV. Type Series Booklet Globe Valve BOA-H/HE/HV/HEV PN 25/40 DN 10-350 Bellows Flanged/Butt Weld Ends or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet BOA-H/HE/HV/HEV All rights reserved.

More information

Sempell High Pressure Stop Valves Model VA510 (DIN)

Sempell High Pressure Stop Valves Model VA510 (DIN) Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with

More information

Pressure reducing valve Pressure reducing valve in straightway form DN

Pressure reducing valve Pressure reducing valve in straightway form DN Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast

More information

BOACHEM FSA. Type Series Booklet

BOACHEM FSA. Type Series Booklet Strainer BOACHEM FSA PN 10-40 DN 15-400 Flanged ends Type Series Booklet Legal information/copyright Type Series Booklet BOACHEM FSA KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided

More information

Forged steel Fig. 640/641 (Y) Page 6

Forged steel Fig. 640/641 (Y) Page 6 Thermodynamic steam trap CONA TD ANSI Thermodynamic steam trap Thermodynamic steam trap ANSI150 / - with flanges (Fig. 640/641...1) - with screwed sockets (Fig. 640/641...2) - with socket weld ends (Fig.

More information

with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426

with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426 with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing

More information

Oil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148

Oil safety valve 141 Flame arrester 143 Air release valve for reservoirs 145 Reparation of valves, pumps and other valves 148 PRODUCT CATALOGUE 2 History 4 Products Gate valves Flat 13 Oval 25 Round 41 Knife 53 Butterfly valves Double eccentric 63 Triple eccentric 81 Turbine inlet valves 85 Non-return valve Swing check valves

More information

Maintenance-free metallic seat shut-off globe valves

Maintenance-free metallic seat shut-off globe valves Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16

More information

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator

More information

ARI-STEVI 440 / 441 DVGW type approval

ARI-STEVI 440 / 441 DVGW type approval ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type

More information

NORI 500 ZXLR/ZXSR. Type Series Booklet

NORI 500 ZXLR/ZXSR. Type Series Booklet Globe Valve NORI 500 ZXLR/ZXSR PN 250-500 DN 10-50 With Gland Packing With Back Seat Flanged or with Butt or Socket Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet NORI 500

More information

NORI 40 ZXL/ZXS Type Series Booklet

NORI 40 ZXL/ZXS Type Series Booklet Globe Valve NORI 40 ZXL/ZXS PN 25/40 DN 10-400 Type Series Booklet Legal information/copyright Type Series Booklet NORI 40 ZXL/ZXS All rights reserved. The contents provided herein must neither be distributed,

More information

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.

More information

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)

ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP

More information

Forged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4

Forged steel High temperature steel Stainless steel BR 640 / BR 641 (Y) Page 2. with system connectors. Stainless steel BR 642 / BR 643 (Y) Page 4 Thermodynamic steam traps TRACO CONA TD Thermodynamic steam trap PN40 - with flanges (BR 640/641...1) - with screwed sockets (BR 640/641...2) - with socket weld ends (BR 640/641...3) - with butt weld ends

More information

AKG-A/AKGS-A. Type Series Booklet

AKG-A/AKGS-A. Type Series Booklet Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,

More information

ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn

ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP

More information

Forged steel Stainless steel Fig. 610/612 (Y) Page 2. Forged steel Fig. 616 Page 6

Forged steel Stainless steel Fig. 610/612 (Y) Page 2. Forged steel Fig. 616 Page 6 Thermostatic steam trap CONA M ANSI Thermostatic steam trap Thermostatic steam trap ANSI150 / - with flanges (Fig. 610/612...1) - with screwed sockets (Fig. 610/612...2) - with socket weld ends (Fig. 610/612...3)

More information

ARI-ZETRIX Process valve (gear-operated / actuated)

ARI-ZETRIX Process valve (gear-operated / actuated) - Fig. 016 - Double flanged process valve with metallic sealing - Triple offset Process valve (gear-operated / actuated) with worm gear Self-locking With variable adjustment Page 4 Fig. 016 - gear with

More information

STEVI 440 / 441. Straight through control valve DN

STEVI 440 / 441. Straight through control valve DN with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.

More information

EXTRACTION CHECK VALVES TYPE C09.6

EXTRACTION CHECK VALVES TYPE C09.6 Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for

More information

STEVI 450 / way control valve in mixing and diverting design DN

STEVI 450 / way control valve in mixing and diverting design DN STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel

More information

Uniwat. Resilient Seated Gate Valves

Uniwat. Resilient Seated Gate Valves Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01

More information

Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250

Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

High temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12

High temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12 Bimetallic steam trap CONA B ANSI Bimetallic steam trap Bimetallic steam trap ANSI150 / - with flanges (Fig. 600/601...1) - with screwed sockets (Fig. 600/601...2) - with socket weld ends (Fig. 600/601...3)

More information

High temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12

High temperature steel Fig. 600 Page 8. High temperature steel Fig. 600 Page 10. High temperature steel Fig. 600 Page 12 Bimetallic steam trap CONA B ANSI Bimetallic steam trap Bimetallic steam trap ANSI150 / - with flanges (Fig. 600/601...1) - with screwed sockets (Fig. 600/601...2) - with socket weld ends (Fig. 600/601...3)

More information

AKG-A/AKGS-A Type Series Booklet

AKG-A/AKGS-A Type Series Booklet Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,

More information

Steam-Conditioning Valve

Steam-Conditioning Valve Steam-Conditioning Valve Steam-Conditioning Valve Components Tailored to Meet Any Requirement Powerful actuator Whether you want to use it for control or safety applications, the actuator for ARCA s steam-conditioning

More information

LONG STEM BALL VALVE of carbon steel with welded ends series

LONG STEM BALL VALVE of carbon steel with welded ends series with welded ends 38000 series C ont R o L Description Edition 05-07-2016 Ball valve series 38000 tested according to the EN488 standard and fulfill the requirements of this standard. Tight on-off valve

More information

ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators

ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator

More information

Body Pressure Relief Valve UGS. p approx. 750 bar DN 15. Type Series Booklet

Body Pressure Relief Valve UGS. p approx. 750 bar DN 15. Type Series Booklet Body Pressure Relief Valve UGS p approx. 750 bar DN 15 Type Series Booklet Legal information/copyright Type Series Booklet UGS All rights reserved. The contents provided herein must neither be distributed,

More information

PRODUCT PORTFOLIO VALVES

PRODUCT PORTFOLIO VALVES BORSIG SERVICE GMBH PRODUCT PORTFOLIO VALVES www.borsig.de Borsig service GmbH ABOUT BORSIG VALVES BORSIG offers comprehensive products and service solutions for power generation, the oil and gas industries

More information

Swing Check Valve AKR/AKRS. PN DN 80/80 to 300/250. Type Series Booklet

Swing Check Valve AKR/AKRS. PN DN 80/80 to 300/250. Type Series Booklet Swing Check Valve AKR/AKRS PN 63-160 DN 80/80 to 300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKR/AKRS All rights reserved. The contents provided herein must neither be distributed,

More information

Si 2323 / Si 2324 / Si 2325

Si 2323 / Si 2324 / Si 2325 Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si 2323 / Si 2324 / Si 2325 Features Straightforward design for high pressures The regular flow safety

More information

Shut-off valves in stainless steel SVA-S SS

Shut-off valves in stainless steel SVA-S SS Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection

More information

Grey cast iron SG iron Cast steel Forged steel High temperature steel Stainless steel Fig. 631 Page 2

Grey cast iron SG iron Cast steel Forged steel High temperature steel Stainless steel Fig. 631 Page 2 Ball float steam trap CONA S ANSI Ball float steam trap Ball float steam trap ANSI125 / 150 / 300 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3)

More information

ARI-STEVI 470 / 471 (DN15-150)

ARI-STEVI 470 / 471 (DN15-150) With pneumatic and electric actuators ARI-STEVI 470 / 47 (DN5-50) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 47 Pneumatic actuator

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information