Model PHS (Female Threading Type)
|
|
- Ursula Miller
- 6 years ago
- Views:
Transcription
1 Mode PHS (Femae Threading Type) φ φ Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 W D 1 D 2 B L D JIS Cass PHS M PHS M PHS M PHS M PHS M PHS M PHS M PHS M PHS M PHS M PHS M PHS M Materia Hoder : S35C (Chromate treatment) Spherica inner ring : SUJ2, 58 HRC or higher Hard chrome pated except for the Bush : copper aoy Condition Norma oad Indeterminate oad Dimensiona toerance of the shaft p6 Mode number coding PHS1 L Mode number Left-hand thread A
2 φ φ Spherica inner ring dimensions Permissibe tit anges Static appied oad Radia L 1 L 2 Grease nippe d d 1 C C S Ba diameter Da mm (inch) H7 N g ( 7 / 16 ) ( 1 / 2 ) ( 5 / 8 ) ( 3 / 4 ) ( 7 / 8 ) PB (1) (1 1 / 8 ) (1 1 / 4 ) (1 3 / 8 ) (1 1 / 2 ) (1 11 / 16 ) A-M6F (2) Cearance Radia cearance Axia cearance.35 or ess.1 or ess Lubrication Appy ubricant before using the product. The hoder has a greasing hoe and an oi groove; they aow grease to be repenished through the grease nippe as necessary. Identification of Left-hand Thread If the femae threading is eft-hand, symbo L is added. The actua product is marked with symbo L on the hoder. Rod End Permissibe Tit Anges A
3 Mode NHS-T (No Lubrication Type) φ φ Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 W D 1 D 2 B L D +.1 JIS Cass NHS 3T M NHS 4T M NHS 5T M NHS 6T M NHS 8T M NHS 1T M NHS 12T M NHS 14T M NHS 16T M NHS 18T M NHS 2T M NHS 22T M Materia Hoder : S35C (Chromate treatment) For NHS3T and NHS4T, S2C Spherica inner ring : SUJ2, 58 HRC or higher Bush Hard chrome pated except for the : Sef-ubricating synthetic resin Condition Norma oad Indeterminate oad Dimensiona toerance of the shaft p6 Mode number coding NHS1T L Mode number Left-hand thread A
4 φ φ Spherica inner ring dimensions Permissibe tit anges Static appied oad Radia L 1 L 2 d d 1 C C S Ba diameter Da mm (inch) H7 N g ( 3 / 8 ) ( 13 / 32 ) ( 7 / 16 ) ( 1 / 2 ) ( 5 / 8 ) ( 3 / 4 ) ( 7 / 8 ) (1) (1 1 / 8 ) (1 1 / 4 ) (1 3 / 8 ) (1 1 / 2 ) Cearance Radia cearance Axia cearance.35 or ess.1 or ess Initia Lubrication This mode can be used without ubrication. However, if desiring to provide initia ubrication, appy oi or grease to the spherica area. Identification of Left-hand Thread If the femae threading is eft-hand, symbo L is added. The actua product is marked with symbo L on the hoder. Rod End Permissibe Tit Anges A
5 Mode POS (Mae Thread Type) Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 B L 1 L D.1 JIS Cass 2.1 POS M POS M POS M POS M POS M POS M POS M POS M POS M POS M POS M POS M Materia Hoder : S35C (Chromate treatment) Spherica inner ring : SUJ2, 58 HRC or higher Bush Hard chrome pated except for the : copper aoy Condition Norma oad Indeterminate oad Dimensiona toerance of the shaft p6 Mode number coding POS1 L Mode number Left-hand thread A
6 φ φ Grease nippe (Greasing hoe) Spherica inner ring dimensions Permissibe tit anges Static appied oad Radia d d 1 C C S Ba diameter Da mm (inch) H7 N g ( 7 / 16 ) ) ( 1 / 2 ) ( 5 / 8 ) ( 3 / 4 ) ( 7 / 8 ) (1) PB (1 1 / 8 ) (1 1 / 4 ) (1 3 / 8 ) (1 1 / 2 ) (1 11 / 16 ) A-M6F (2) Cearance Radia cearance Axia cearance.35 or ess.1 or ess Lubrication Appy ubricant before using the product. The hoder has a greasing hoe and an oi groove; they aow grease to be repenished through the grease nippe as necessary. To ubricate the product, repenish grease from the hoder greasing hoe for modes POS5 and 6, or from the grease nippe for other modes. Identification of Left-hand Thread If the mae thread is eft-hand, symbo L is added. The actua product is marked with symbo L on the hoder. Rod End Permissibe Tit Anges A
7 Mode NOS-T (No Lubrication, Mae Thread Type) Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 B L 1 L D +.1 JIS Cass NOS 3T M NOS 4T M NOS 5T M NOS 6T M NOS 8T M NOS 1T M NOS 12T M NOS 14T M NOS 16T M NOS 18T M NOS 2T M NOS 22T M Materia Hoder : S35C (Chromate treatment) For NOS3T and NOS4T, S2C Spherica inner ring : SUJ2, 58 HRC or higher Bush Hard chrome pated except for the : Sef-ubricating synthetic resin Condition Norma oad Indeterminate oad Dimensiona toerance of the shaft p6 Mode number coding NOS1T L Mode number Left-hand thread A
8 φ φ Spherica inner ring dimensions Permissibe tit anges Static appied oad Radia d H7 Ba diameter Da mm (inch) d 1 C C S g ( 3 / 8 ) ( 13 / 32 ) ( 7 / 16 ) ( 1 / 2 ) ( 5 / 8 ) ( 3 / 4 ) ( 7 / 8 ) (1) (1 1 / 8 ) (1 1 / 4 ) (1 3 / 8 ) (1 1 / 2 ) Cearance Radia cearance Axia cearance.35 or ess.1 or ess Initia Lubrication This mode can be used without ubrication. However, if desiring to provide initia ubrication, appy oi or grease to the spherica area. Identification of Left-hand Thread If the mae thread is eft-hand, symbo L is added. N Rod End Permissibe Tit Anges A
9 Mode PB (Standard Type) φ φ Static Permissibe appied Main dimensions Ba diameter tit anges oad Radia Inner Outer Outer Inner Mode No. diameteeter width width diam- ring ring d D B B 1 d 1 H C, r Da C S g H7 h6.1 mm (inch) N.1 PB ( 7 / 16 ) PB ( 1 / 2 ) PB ( 5 / 8 ) PB ( 3 / 4 ) PB ( 7 / 8 ) PB (1) PB (1 1 / 8 ) PB (1 1 / 4 ) PB (1 3 / 8 ) PB (1 1 / 2 ) PB (1 11 / 16 ) PB (2) Materia Outer ring : S35C Spherica inner ring : SUJ2, 58 HRC or higher Bush Hard chrome pated except for the : copper aoy For the fitting between the shaft and the housing, the foowing vaues are recommended. Inner ring rotationa oad Outer ring rotationa oad Condition Shaft Housing Norma oad Indeterminate oad Norma oad Indeterminate oad m6 n6 k6 H7 M7 Cearance Radia cearance Axia cearance Permissibe Tit Anges.35 or ess.1 or ess Lubrication Appy ubricant before using the product. The hoder has a greasing hoe and an oi groove; they aow grease to be repenished through the grease nippe as necessary. A
RNFTL A5 S RS2510A20. Rolled ball screws B256
oe ba screws -I-6.5 oe a Screw Series (1) Prouct cassification NSK roe ba screws are cassifie by nut moe as shown in abe I-6.4. abe I-6 4 Cassification of roe ba screws moe shape ecircuation system cassification
More informationClamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationHSS-Drills. HSS-DrillS
-Dris -DriS Center dris Cutting direction Too materia Standard Diameter range (mm) Cataog no. Discount group Standard range, page Center dris without fat DIN 333 0,500-12,500 71600 132 367 eft-hand DIN
More informationHow to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator.
Compact Side Series MXU How to Order MXU A90V S Compact side Bore size 1 ø ø ø1 1 2 Stroke mm mm 1mm mm 2mm mm Number of auto switches 2 Auto switch S 1 Without auto switch (Buit-in magnet) Appicabe Auto
More informationFlat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
More informationCenter drills. Center drills without flat din 333. Center drills without flat din 333. Catalogue no. Catalogue no. Tool material
Center dris Center dris without fat din 333 Cataogue 71600 Standard dri for producing centre hoes acc. to din 332, Sheet 1, form a (without protecting chamfer). Center dris with Ø 0.5 and 0.8 mm are ony
More informationDisplacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2
Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................
More informationDisplacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1
Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationClass Quality Module Total Tooth Thickness Max. Feed Force per Applications (Examples) Pitch Tolerance Length Pinion Contact/
Overview of Integrated Rack 90 Arrangement 180 Arrangement Adjusting between rack and rai not necessary Space-saving and performance-optimized design can be reaized Different types of integrated racks
More informationGEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 10 to 36 ccm Pressure up to 300 bar GHD0 Speed from 350 to 3400 PM Gear Pump Cataogue GHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationDisplacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 RPM GEAR PUMPS T3S
Dispacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 PM GEA PUMPS T3S Gear Pump Cataogue T3S TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationGEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationC-Line Linear guide system
www.bergab.ru adea S.r.. adea GmbH Via Meette, 16 20128 Miano Te. +39 02.27.093.297 Fax +39 02.25.51.768 Internet: www.nadea.it E-Mai: customer.service@nadea.it Rudof-Diese-Straße 28 71154 ufringen Te.
More informationMarCator 1087 ABS USB. No interface box is required! Simple and inexpensive way to set up a multiple measuring. Digimatic. evaluation instrument
- -46 MarCator 1087 The new Digita Indicator Marcator 1087. The muti-functiona Digita Indicator with a combined anaog and digita dispay; pus toerance and dynamic measuring functions. D y n a m i c m e
More informationP0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1
Thumb Pastic Head Knured Thumb 0.5 2 d 4 P0440 1 Thermopastic (PA), back knob. Thread stainess stee (A2) or stee (zinc-pated). Technica Notes Temperature resistant from -30 C to +80 C. Order No. 1 d 4
More informationMarCator 1087 R ABS. Just set once to zero. Battery service life is 3 years. Error free operation
- -6 MarCator 1087 R The new Digita Indicator MarCator 1087 R. The muti-functiona Digita Indicator with a combined anaog and digita dispay as we as toerance and dynamic measuring functions. Dynamic measuring
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationINDUSTRY PROCESS AND AUTOMATION SOLUTIONS TECNOINGRANAGGI
INDUSTRY PROCESS AND AUTOMATION SOUTIONS TECNOINGRANAGGI MP SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4
More informationPremium quality cutting tools. Super Drills. Gold Drills
Premium quaity cutting toos Super Dris God Dris Super Dris (Precision driing on hard materia) ØD h8 ±3 o SPLIT 1 o POINT L1 HELIX ANGLE L APPLICATION : Driing aoy stee up to 28-35 HRc. Suitabe for driing
More informationCNA. Series. Cylinder with Lock. Suitable for intermediate stops, emergency stops and drop prevention. ø40, ø50, ø63, ø80, ø100
Suitabe for intermediate stops, emergency stops and drop prevention Simpe construction force magnifying mechanism is empoyed based on the wedge effect of the taper ring and stee bas. Cyinder with Lock
More informationoptibelt KS V-Grooved Pulleys - Balancing, Surcharges for Finished Bores
optibet KS V-Grooved Pueys - Baancing, Surcharges for Bores 1 2 3 4 5 6 7 8 9 10 11 Baancing: The ist prices appy, as per VDI 2060, to cast iron pueys baanced in one pane as foows: Grade G 16 for Ø d d
More informationTROUBLE SHOOTING MANUAL
TROUBLE SHOOTNG MANUAL Mode RGDGOOT 0 FUJ HEAVY NDUSTRES LTD. PREFACE This manua covers the troube shooting procedures of Robin RGD600T generator. Carefu observance of the instructions given herein wi
More informationSUMMARY. Contents. Chapter
SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4 Selecting the gear unit...5 1.5 Service life of bearings...6
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationGEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM
Dispacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 PM GEA MOTOS JM Gear Motor Cataogue JM TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationUniting business - one person at a time BALL LINEAR GUIDES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS
Uniting business - one person at a time A IAR UIDS OR COMMRCIA AD IDUSTRIA APPICATIOS ORDRI IORMATIO inear uide wit was-down coating eatures of AA a inear uides: Interna ubrication for onger ife Size intercangeabe
More informationShaft Locking Devices
abe of Contents JW Shaft ocking evices In his Section: Sef-Centering Series SS ow orque Series SS Meium orque Series SS High orque Series SS Heavy uty Series SS S www.ovejoy-inc.com 425 S-1 abe of Contents
More informationLintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting
Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series
More informationTANKER T AND TANKER S SERIES
High Force and Long Strokes TANKER T AND TANKER S SERIES High force in short heights with contact forces to 15,400 bs. Stroke engths to 225 mm Dynamic ubrication extends spring ife Bore sea resists contamination
More informationASSEMBLY AND INSTALLATION
ASSEMBY AND INSTAATION STRAIGT AND EVE GUARDRAIING (using Tpes 10, 15, 20, 21, 25 & 26) Where: = distance between centres of uprights I = ength of horizonta tube = distance from ground to centre ine of
More informationA Product of Hard Work SELECTOR GRABS
A Product of Hard Work SELECTOR GRABS ATTACHMENTS SELECTOR GRABS The perfect partner for your machine Simpe heavy duty design for maximum durabiity and reiabiity Buit in safety features to protect the
More informationCHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE
CHECK VAVE P.47 P.49 P.5 P.53 P.55 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 45 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. Pressure
More informationMETRIC BALL SCREW JACKS
METRIC BA METRIC BA With over twenty-five years of experience manufacturing precision worm gear screw jacks, Nook Industries has expanded the ActionJac offering to include metric models providing design
More informationManifold Technology.
----------------------------------------------------- 2017.2 Manifod Technoogy. made in Germany I Epkg. unitrything UNDER CONTROL. Manifod Technoogy - I BEULCO heating and cooing manifods made of high-quaity
More informationBNZ Small hole boring bars DAL / DDL / DML. G High speed machining for super finishing hardened steel (HRC50~60) G Excellent surface roughness
SUMIBOON / SUMIDIA Precision BNBB M20 Sma hoe boring toos CBN cutting edge is brazed on to a soid carbide shank. Sma hoe boring BNZ M21 Sma hoe boring bars Soid carbide boring bars WB M22 CBN rooving System
More informationGXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation
777 PHOTO PHOTO DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms... P.16~ seection guide... P.77~ Genera precautions... P. Conforming
More informationTECHNICAL DATA AND INFORMATION. 366 hp. 145, ,710 lbs. up to 68.9 ft SCRAP-HANDLING AND PORT MACHINE MHL380D
TECHNICAL DATA AND INFORMATION 366 hp 145,505-147,7 bs up to 68.9 ft MHL380D SCRAP-HANDLING AND PORT MACHINE TECHNICAL DATA MHL380 D OPERATING WEIGHT 145,505-147,7 bs DIESEL ENGINE MANUFACTURER AND MODEL
More informationPerkins 3000 Series USER S HANDBOOK. This document has been printed from SPI². Not for Resale. 12 cylinder diesel engines for industrial applications
This document has been printed from SPI². Not for Resae Perkins 3000 Series USER S HANDBOOK 3012/CV12 12 cyinder diese engines for industria appications The contents of this handbook are appicabe to both
More informationPRELIMINARY TECHNICAL DATA AND INFORMATION. 85 kw/114 hp t. up to 10.4 m RECYCLING MACHINE MHL320D
TECHNICAL DATA AND INFORMATION PRELIMINARY 85 kw/114 hp 17.8-1. t up to 1.4 m MHL2D RECYCLING MACHINE TECHNICAL DATA MHL2 D OPERATING WEIGHT 17.8-1. t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 212
More informationPTFE SELF-LUBRICATE BEARING
PTFE SEF-UBRICATE BEARING About US SAIBO is one of world recognized leaders in design and manufacturing of low friction linear motion components and precision bearings. SAIBO products are exported to
More informationHEAVY DUTY BLOCKS. SPW and SFCW TYPE CAT. NO. C-2600-III
HEAVY DUTY BLOCKS SPW an SFCW TYPE CAT. NO. C-2600-III NUMBERING SYSTEM Housing Bore Diaeter C - SP W 2 2 20-307 N1 Prefix Bearing Suffix 1. PREFIX 3. BEARING No sybo: Stanar unit with seae spherica roer
More informationTERMINALI A SNODO INDUSTRIALI INDUSTRIAL BALL-JOINT ENDS
TERMINAI A NODO INDUTRIAI INDUTRIA BA-JOINT END Descrizione - Description Type TABEA COMPARATIVA TERMINAI A NODO COMPARATIVE TABE OR BA-JOINT END Page 142 CT C 143 CT N 143 CTCE N 144 CTAPR CE 144 CTAPR
More informationEP Series WPS150S. Generator Set Specification. Super Quiet, Superior Life! Page of 5
EP Series Generator Set Specification Super Quiet, Superior Life! Page - 1 - of 5 3-Phase, 50Hz@1500RPM Prime Power Standby Power Votage kw kva Amps 380 120 150 227.9 400 120 150 216.5 415 120 150 208.7
More informationGT 2 Timing Belt Pulleys - 3 mm Pitch
GT Timing Bet Pueys - mm Pitch PROFIE AUMINUM OUBE OR NO FANGE / 7.0 /. / MATERIA: Auminum Aoy FINIH: Cear Anoize Cataog Number A AM0F00 A AM07F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00 A AM0F00
More informationSanta Ana Operations. Slimsert - One-piece thin-walled locked-in threaded insert
Santa Ana Operations Slimsert - One-piece thin-walled locked-in threaded insert SIMSERT REPAIR KIT CONTENTS VERY IMPORTANT ONE PIECE OCKING SIMSERT -NON OCKING (FOUR POINT) STEP DRI (NEW HOE PREPARATION)
More informationCylinder with Lock. CNS Series
yinder with Lock S Series ø, ø, ø ocking cyinder idea for intermediate stops, emergency stops and drop prevention. Simpe construction force magnifying mechanism is empoyed based on the wedge effect of
More informationSeries ADR. Double Rod Cylinder W1H ADR M Bore Size : ф10, ф16, ф20, ф25. How to Order A ACP UACP AM2 AM AL ALX ARD AQ2 AGX GX ADM ADR
Double Rod Cylinder Bore Size : ф10, ф16, ф, ф25 HIGH ATERA OAD CAPABIITY ADJUSTABE STROKE IS AVAIABE A THIN AND COMPACT DOUBE ROD CYINDER BA BUSHING OPTION AUTO SWITCH READY NON-UBE SERVICE STAND. A 2
More informationPOWER TRANSMISSION FLEXIBLE COUPLINGS ORPEX
POWER TRANSMISSION FLEXIBLE COUPLINGS 2 FLEXIBLE COUPLINGS Orpex copings are ses compensation copings everywhere where an absotey reiabe torqe transfer is reqired. Orpex copings cover with their types
More informationGXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting
1 DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F- Gossary of terms... P.176~ guide... P.71~ Genera precautions... P.179~ PHOTO PHOTO IGHT FOW PARTICUAR
More informationJCB SKID STEER AND COMPACT TRACK LOADERS
OPERATING WEIGHT : 225 8,111 bs (3,679 kg) 260 8,389 bs (3,805 kg) 280 8,525 bs (3,867 kg) 300 8,966 bs (4,067 kg) 330 9,266 bs (4,203 kg) I M J G F E D L C P O N K H A B STATIC DIMENSIONS 225/260/280/300/330
More informationAny switch configuration
Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro
More informationHIGH CAPACITY FORKLIFT TRUCKS H18-20XM-9, H18-20XMS MM
HIGH CAPACITY FORKLIFT TRUCKS H18-20XM-9, H18-20XMS-9 18 000 20 000 KG @ 900 MM H18-20XM(S)-9 TRUCK DIMENSIONS DISTINGUISHING MARKS 1.1 Manufacturer (abbreviation) 1.2 Manufacturer s type designition 1.3
More informationMHL 335 MHL 335 MATERIAL HANDLER
MHL 335 MATERIAL HANDLER ENGINE WEIGHT REACH 153 HP (114 kw) 51,808-55,115 bs (23.5-25 t) 39.4' (12 m) 36' (11 m) 35' (10.7 m) High-performance 153 HP (114 kw) turbocharged diese engine (TIER III/COM III)
More informationHigh-performance milling tools New tools 2017
passion for precision High-performance miing toos New toos 2017 New cutting data cacuator TooExpert MFC End miing toos for stee, stainess stee, titanium and nicke Cyindrica Smooth-edged, norma version
More informationMini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
More informationPrinciples of design WR System
-1-1 EN 1995 WR fasteig system by SS itec Pricipes of desig WR System WR WR Covicig advatages high oad-bearig capacity easy istaatio stee/ coectios high fire resistace Data sheet Nr. 01 3.04 rapid assemby
More informationGuide plate. Fig. 1 Construction of Slide Pack Type FBW-RUU
A Slide Pack Slide Pack Type FBW Japanese patent No. 1696446 Overseas patent resistered in the U.S. Mounting plate Ball Slide rail Seal Guide plate Stopper Fig. 1 Construction of Slide Pack Type FBW-RUU
More informationMHL 340D MHL 340D MATERIAL HANDLER
MHL 340D MATERIAL HANDLER ENGINE 171 HP (128 kw) WEIGHT REACHES 60,627-63,934 bs (27.5 t - 29 t ) 41.4 (12.6 m) 45 (13.7 m) RECYCLING MACHINE MHL 340D High performance 171 hp (128 kw) Deutz turbocharged
More informationPART WEIGHT AND DIMENSIONS REFERENCE TABLE
pistons and cylindrical parts that are manufactured with a flange. TRANSDUCERS AND MODUAR MEASURING SYSTEM Quick Set is a retoolable modular system that can be assembled in three different gauging configurations:
More informationEC Series GMS200C. Generator Set Specification. Your Partner for Power. Page of 5
EC Series Generator Set Specification Your Partner for Power Page - 1 - of 5 3-Phase, 50Hz@1500RPM Prime Power Standby Power Votage kw kva Amps 380 160 200 303.9 400 160 200 288.7 415 160 200 278.2 440
More informationn Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
More information_# -.. -,. ,,.,. / ,r,..-: ;../. - ' ,, , ' .. _, fi'' _...,.. .,,.._. ... j . -. ' ' ; ; l t;. ,.
-- - ----- -.... j - ---~J,... _...,.. -. _# -.. - -.. - t,..,, r ~ \ : \... t;....,..- \~t. " -... ~,_J.,,.~ i, --- ~-;, 1.... -. J.. -,..,,.._ -""..r..-,r,..-: ;../....,.. _,,..J -- -...,,.,. / / ~ 1..
More informationItem 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2"-2"
Item M 3-Way Metal Seated Ball Valve ASME / 300 & 800 psi : -" ZIPSON'S M type, 3-way metal seated ball valve is a totally unique valve design for critical working condition of high working temperature
More informationPERFORMANCE AND KNOW-HOW
Linear and Motion Soutions PERFORMANCE AND KNOW-HOW Nadea represents 50 years of neede and cam foower bearing know-how. Our ong history in design and manufacturing has extended over the years to the products
More informationN1VS VARIABLE SPEED AIR HANDLERS
(0500) TECHNICAL SPECIFICATIONS VARIABLE SPEED AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING AND HEAT PUMP 600-2000 CFM BLOWERS 2-5 TON COILS OPTIONAL1 & 3 Ø ELECTRIC HEATERS DESCRIPTION These variabe
More informationContents. Tandembox Drawers. CLIPtop Blumotion Page 1. D Height Page 17. Tandembox Drawers. CLIPtop Hinges Page 2.
B u m S t o c k P r o g r a m Contents CLIPtop Bumotion Page 1 Tandembox Drawers D Height Page 17 CLIPtop Hinges Page 2 Tandembox Drawers K Height Page 18 TIP-ON for Tandembox. CLIP Base Pates Page 6 Servo
More information9.01 ROTARY JOINTS. Valvoind. valvole industriali. VALVOIND Srl Via Pascoli, Bagnatica (Bergamo) Tel Fax. 035.
9.01 ROTARY JOINTS VAVOIND Srl Via Pascoli, 5-24060 Bagnatica (Bergamo) Tel. 035.681919 Fax. 035.684461 9.02 ROTARY JOINTS SEF-SUPPORTED GRAPHITE VAVOIND Srl Via Pascoli, 5-24060 Bagnatica (Bergamo) Tel.
More information1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP.
The engineering resut of carefu market research: Sma, ight, powerfu and universay appicabe Te: 0 85 3 / 39-0 Fax: 3 94 8 http://www.hatz-diese.de emai: marketing@hatz-diese.de.4-7.7 kw.8-0.5 HP 5 / 629
More informationNew York State Department of Motor Vehicles DRIVER S MANUAL FOR THE SAFE SECUREMENT METAL COILS AND OTHER CARGO
New York State Department of Motor Vehices DRIVER S MANUAL FOR THE SAFE SECUREMENT OF METAL COILS AND OTHER CARGO TABLE OF CONTENTS INTRODUCTION................................ i - ii SECTION 1 Fundamentas
More informationTECHNICAL DATA AND INFORMATION. 114 kw/152 hp t. up to 12 m SCRAP RECYCLING MACHINE MHL335
TECHNICAL DATA AND INFORMATION 114 kw/152 hp 23.5-25 t up to 12 m MHL335 SCRAP RECYCLING MACHINE TECHNICAL DATA MHL335 OPERATING WEIGHT 23.5-25t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 2012 L06
More informationCutting and Turning Tools
Cuing and Turning Toos Our Company Specia Cuing Toos Circuar- and Thread Miing Toos Cuing and Turning Toos Driven Toohoders for CNC Machining Ceners Driven Toohoders for CNC Turning Machines Mui-Spinde
More informationL-SERIES BACKHOES 310L EP / 310L / 310SL / 310SL HL / 315SL / 410L / 710L LIFT MORE AND MULTITASK
L-SERIES BACKHOES L EP / L / SL / SL HL / 5SL / L / 7L LIFT MORE AND MULTITASK THE 7L -ft. 9-in. MAXIMUM DIGGING DEPTH (WITH OPTIONAL EXTENDABLE DIPPERSTICK) UP TO % INCREASE IN BACKHOE LIFT CAPACITY (WITH
More informationHSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options
More informationANGLE JET (Angle Head Holder)
ANGE JET (Angle Head Holder) BT -AGCT-RSC - D HSA -AGCT-RSC - D With the new mechanism "the coolant unit ", the thru-the-coolant from the spindle can be supplied directly to the cutting edge. FEATURES
More informationBall Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
More informationFBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
More informationThread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability)
Kerk onventiona s: FW Series Free Wheeing Kerk FW Series conventiona stye, without anti-backash function. The Kerk FW Series genera purpose free-wheeing nut is for appications not requiring anti-backash
More informationBevel Gears. Catalog Number of KHK Stock Gears. Bevel Gears M BS G R. Gears. Spur. Helical. Gears. Internal. Gears. Racks. CP Racks.
MHP High-Ratio Hypoid Ground Spiral G Ground Spiral 15 ~ 200 2 m1, 1.5 Page 456 m2 ~ 4 Page 458 m2 ~ 4 Page 460 Spur MBSA MBSB Finished Bore Spiral Spiral 1.5 ~ 4 SBZG Ground Zerol 1.5, 2 Helical m2 ~
More informationSRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball M Guide Miniature Type Model M rail Endplate End seal M block Compact type Model -M Ball Side seal Ball cage Wide type Model -WM * or the ball cage, see A. Point of Selection A Point of Design
More informationVDC Series High-Pressure Type Variable Volume Vane Pump
V SRS PRSSUR TYP VARA VU VA PUP V Series igh-pressure Type Variabe Voume Vane Pump eatures q ighy efficient and stabe high-pressure operation nnovative pressure contro and pressure baance mechanisms combine
More informationJCB SMALL PLATFORM SKID STEER AND COMPACT TRACK LOADERS
JC SMALL PLATFORM SKID STEER AND COMPACT TRACK LOADERS RATED OPERATING CAPACITY: 135 1,350 b (612 kg) 155 1,550 b (703 kg) 175 1,750 b (794 kg) 190 1,900 b (862 kg) 205 2,050 b (930 kg) I M J G F E D L
More informationS.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1
NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer
More informationSGM Series. Size 22 Contacts. Qualified to MIL-DTL IEC Publication HIGH DENSITY RECTANGULAR CONNECTORS with FIXED CONTACTS
Size 22 Contacts Qualified to MI-DT-28748 IEC Publication 807-1 Telecommunication U.. File #E140980 MIITARY SPECIFICATIONS: Qualified to MI-DT-28748/7 and MI- DT-28748/8. INTERNATIONA STANDARDS: IEC 807-1
More informationOperating instructions Maintenance instructions
Operating instructions Maintenance instructions Origina operating instructions S/N 101 692 26 1434 > / S/N 101 692 35... Reversibe Vibrating Pate Cataogue No. 008 067 61 12/2012 Foreword 1 Foreword BOMAG
More informationPrestolok. Spark resistant push-in fittings for fluids. Catalogue /UK
Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae
More informationConnect - Contact - Control. Charging Connectors LV Series A 84.en
Connect - Contact - Contro Charging Connectors LV Series 34.5 63 83 94 A 84.en LV Series charging connectors Competence, innovation and decades of experience Our new LV Series charging connectors represent
More informationPROTECTRON MACHINED CONTACT CONNECTORS
PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON INTRODUCTION INNER CLIP The inner cip consists of 4 Leaf Springs, stamped and rounded to take strip/round mae contacts at the bottom edge, faciitating
More informationANTILOCK BRAKE SYSTEM
SECTION 4F ANTILOCK BRAKE SYSTEM Caution: Disconnect the negative battery cabe before removing or instaing any eectrica unit or when a too or equipment coud easiy come in contact with exposed eectrica
More informationDODGE E-Z KLEEN and ULTRa KLEEN BaLL BEaRiNGs
DODGE E-Z KLEEN and ULTRA KLEEN Ball Bearings DODGE E-Z KLEEN an d ULTRA KLEEN Ba l l Bear ings For over 125 years, the DODGE brand has been synonymous with the best the industry has to offer. Bearing
More informationKENNAMETAL HERTEL FIX-PERFECT
KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification
More informationIndustry. SNR, your guide to linear modules
Industry SNR, your guide to inear modues SNR A bearing manufacturer known across the word For amost a century SNR has been focusing on the deveopment, design and manufacture of bearings. Today SNR has
More informationE-SERIES SKID LOADERS. Courtesy of Machine.Market
E-SERIES SKID LOADERS 1 6 4 0 E 3 6 4 0 E 4 2 4 0 E 4 6 4 0 E POWER2 In 1859, an agricutura impement company, housed in a backsmith shop, was started in West end, Wisconsin. From these humbe beginnings,
More informationRCK CLAMPING ELEMENTS
RCK CAMPING EEMENTS SERIES RCK 11 page 6 SERIES RCK 13 7 SERIES RCK 15 8 SERIES RCK 16 9 SERIES RCK 19 10 SERIES RCK 40 11 SERIES RCK 45 12 SERIES RCK 50 13 SERIES RCK 55 14 SERIES RCK 60 15 SERIES RCK
More informationRenold Roller Chain products are available from
Renold Roller Chain products are available from MARYLAND METRICS RENOLD Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142
More informationH T STD STD STD
Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2
More informationLinear Slot Diffusers Series
Linear Sot iffusers 5000 Series Linear Sot iffusers 5000 Series The Series 5000 Linear Sot Ceiing iffuser has been speciay designed to provide both the unobtrusive appearance required for architectura
More informationINTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.
INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard
More informationDK-Lok UHP Fittings. No.09-01(E) May 2017
K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05
More informationFlat fan nozzles. tongue-type nozzles
Fat fan nozzes et ceaning Coating Steam ceaning Degreasing igh pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning Spray
More information