JCB SKID STEER AND COMPACT TRACK LOADERS

Transcription

1 OPERATING WEIGHT : 225 8,111 bs (3,679 kg) 260 8,389 bs (3,805 kg) 280 8,525 bs (3,867 kg) 300 8,966 bs (4,067 kg) 330 9,266 bs (4,203 kg) I M J G F E D L C P O N K H A B STATIC DIMENSIONS 225/260/280/300/330 Machine Modes ft-in (m) ft-in (m) ft-in (m) ft-in (m) ft-in (m) A Overa Length 12-2 (3.69) 12-2 (3.69) 12-4 (3.76) 12-5 (3.78) 12-7 (3.80) B Whee Base 4-0 (1.22) 4-0 (1.22) 4-0 (1.22) 4-0 (1.22) 4-0 (1.22) C Ange of Departure degrees D Overa Height 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) 6-11 (2.11) E Dump Height 8-1 (2.46) 8-1 (2.46) 8-1 (2.46) 8-1 (2.46) 8-2 (2.49) F Loadover Height 9-10 (3.02) 9-10 (3.02) 9-10 (3.02) 9-10 (3.02) 10 (3.05) G Height to hinge pin fuy raised 10-5 (3.175) 10-5 (3.175) 10-5 (3.175) 10-5 (3.175) 10-6 (3.2) H ground eve (0.98) (0.98) (0.98) 3-5 (1.04) 3-5 (1.04) I Max fu height 3-2 (.96) (1.23) (1.23) (1.23) 3-11 (1.2) J fu height - fuy dumped 1-11 (.59) 2-10 (0.87) 2-10 (0.87) 2-11 (0.90) 2-11 (0.90) K Dig depth (toe pate horizonta) cearance in (mm) -3/8 (-10) -3/8 (-10) -3/8 (-10) -3/8 (-10) 0 L ground degrees Machine Modes ft-in (m) ft-in (m) ft-in (m) ft-in (m) ft-in (m) M Dump ange degrees N Bucket width - standard 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-6 (1.98) O Width over tires - standard 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-2 (1.87) Width over tires - optiona 6-2 (1.87) 6-2 (1.87) 6-2 (1.87) 6-2 (1.87) 6-0 (1.82) Rated Operating Capacity 50% b(kg) 2250 (1021) 2600 (1179) 2800 (1270) 3000 (1361) 3295 (1495) Bucket capacity - standard yd³ (m³).62 (.47).62 (.47).62 (.47).67(.51).67 (.51) Turning Radius Bucket corner radius 7-3 (2.20) 7-3 (2.20) 7-3 (2.20) 7-3 (2.20) 7-3 (2.20) Quick hitch radius (1.48) (1.48) (1.48) (1.48) (1.48) Rear chassis radius (1.76) (1.76) (1.76) (1.76) (1.76) P Ground Cearance in(mm) 9.4 (238) 9.4 (238) 9.4 (238) 9.4 (238) 9.8 (248) LIFT PATH Radia Vertica Vertica Vertica Vertica

2 OPERATING WEIGHT : 225T 10,152 bs (4,605 kg) 260T 10,692 bs (4,850 kg) 300T 11,199 bs (5,080 kg) 320T 11,508 bs (5,220 kg) I M J G F E D L P C O N K H A B STATIC DIMENSIONS 225T/260T/300T/320T B Machine Modes 225T 260T 300T 320T ft-in (m) ft-in (m) ft-in (m) ft-in (m) A Overa Length 12-2 (3.69) 12-2 (3.69) 12-5 (3.78) 12-5 (3.78) B Track Base 6-11 (2.1) 6-11 (2.1) 6-11 (2.1) 6-11 (2.1) C Ange of Departure degrees D Overa Height 6-10 (2.08) 6-10 (2.08) 6-10 (2.08) 6-10 (2.08) E Dump Height 7-11 (2.42) 7-11 (2.42) 7-10 (2.39) 7-10 (2.39) F Loadover Height 9-10 (2.99) 9-10 (2.99) 9-10 (2.99) 9-10 (2.99) G Height to hinge pin fuy raised 10-5 (3.18) 10-5 (3.18) 10-5 (3.18) 10-5 (3.18) H ground eve 3-2 (0.96) 3-2 (0.96) 3-5 (1.04) 3-5 (1.04) I Max fu height 3-1 (.935) 4 (1.21) 4.3 (1.30) 4.3 (1.30) J fu height - fuy dumped 1-11 (5.85) (0.87) 2-11 (0.90) 2-11 (0.90) K Dig depth cearance in (mm) -3/8 (-10) -3/8 (-10) -3/8 (-10) -3/8 (-10) L ground degrees Machine Modes 225T 260T 300T 320T ft-in (m) ft-in (m) ft-in (m) ft-in (m) M Dump ange degrees N Bucket width - standard 6-6 (1.98) 6-6 (1.98) 7-0 (2.13) 7-0 (2.13) O Width over tracks - standard 6-1 (1.85) 6-6 (1.98) 6-6 (1.98) 6-6 (1.98) Rated Operating Capacity 35% b (kg) 2250 (1021) 2600 (1179) 3000 (1361) 3200 (1452) Rated Operating Capacity 50% b (kg) 3214 (1458) 3994 (1812) 4314 (1957) 4573 (2074) Bucket capacity - standard yd³ (m³).79 (.59).79 (.59).84 (.64).84 (.64) Turning Radius Bucket corner radius (2.24) (2.24) (2.24) (2.24) Quick hitch radius (1.48) (1.48) (1.48) (1.48) Rear chassis radius 5.95 (1.76) 5.95 (1.76) 5.95 (1.76) 5.95 (1.76) P Ground Cearance in (mm) 9.8 (248) 9.8 (248) 9.8 (248) 9.8 (248) Ground Bearing Pressure* psi (Kp) 4.36 (30.1) 4.6 (31.7) 4.8 (33.1) 4.9 (33.8) LIFT PATH Radia Vertica Vertica Vertica * with 17.7 in. wide tracks (450 mm)

3 HYDRAULIC PERFORMANCE Mode R.O.C. bs (kg) Tipping Load bs (kg) Loader Lift bs (kg) Bucket Tit bs (kg) (1021) 4908 (2226) 5884 (2669) 5699 (2585) (1179) 5448 (2471) 5884 (2669) 5699 (2585) (1270) 5608 (2543) 5884 (2669) 5699 (2585) (1361) 6024 (2732) 5809 (2634) 7187 (3260) (1495) 6590 (2989) 5809 (2634) 7187 (3260) 225 T 2250 (1021) 6428 (2915) 5884 (2669) 5699 (2585) 260 T 2600 (1179) 7991 (3624) 5809 (2634) 7187 (3260) 300 T 3000 (1361) 8628 (3913) 5809 (2634) 7187 (3260) 320 T 3200 (1452) 9145 (4148) 5809 (2634) 7187 (3260) CAPACITIES US ga (iters) Hydrauic system (inc. tank) 15.9 (60) Fue tank 27.2 (103) Engine cooant 4.1 (15.5) Engine oi 3.7 (14) LH Chaincase 6.1 (23) RH Chaincase 6.1 (23) ENGINE 225/260/280/225T/260T 300/330/300T/320T Mode JCB Diesemax TC-63 JCB Diesemax TC-68 Dispacement (in 3 ) cm (4399) 268 (4399) Fue Diese Diese Cooing Water Water Aspiration Turbo Turbo Gross 2400rpm SAE J1995 hp (kw) 84.5 (63) 92 (68.6) Gross 1800rpm SAE J1995 b/ft (Nm) 267 (362) 301 (408) Starter motor hp (kw) 2.72 (2) 2.72 (2) Battery vot/ah 12 / 95 12/ 95 Aternator amps Emission Certification EPA-T3 (EU St3) EPA-T3 (EU St3) Engine Oi Service Interva hours Variabe speed hydrauicay driven fan YES YES HYDRAULICS In addition to the main hydrostatic drive pumps, there is a dedicated oader and attachments suppy pump (auxiiary hydrauics circuit standard on a base modes). Pump fow: 23 gpm ( rpm engine speed Main reief pressure 3335 psi (230 bar) HYD HP ow fow (44.8) HYD HP high fow (69.5) Low ever efforts give exceent and easy contro of transmission oader and attachments. Auxiiary hydrauics are actuated via the right hand controer giving progressive contro of oi fow for precise attachment contro. Loader arm hydrauic ines under protective stee guard on PowerBoom. Canister stye, fu fow, hydrauic oi fiter. JCB engine oi for engine and chain case. JCB hydrauic oi. The optiona hi-fow circuit provides 35.7 ga/min (135 iters/min) pump fow to the front of the machine for operation of high capacity attachments such as trenchers and cod paners. Seperate hydrauic pump for transmission charge and hydrauic fan. TRANSMISSION A fu servo controed hydrostatic transmission giving zero to maximum speed, both forward and reverse at fu power. Independent transmission systems for both the eft and right side, controed through servo contros for both precise and easy operation. Transmission power system maintains fu engine power avaiabiity maximizing oader and attachment contro. Creep speed is standard on a machines, for precise contro when running attachments. OPERATOR ENVIRONMENT Fu ROPS and Leve 1 FOPS with optiona Leve 2 guard for demoition, fu audibe and visua warning systems, and sound proofing. Cab access through side door due to JCB s PowerBoom design. Deuxe environment avaiabe in either open canopy, cab with heat, or cab with heat and A/C. Unequaed a-around visibiity. Mode Singe Speed Two Speed mph (kph) mph (kph) / mph (kph) Trave speeds 225/260/280/300: 6.8 (10.9) 6.8 (10.9) / 12.4 (20) Trave speeds 330: 7.3 (11.7) 7.3 (11.7) / 13.5 (21.7) Trave speeds 225T/260T/300T/320T: 5.7 (9.2) 4.8 (7.7) / 7.8 (12.6) Fuy adjustabe suspension seat. Retractabe seat bet fitted as standard. Drainage cover for easy ceaning of chassis. Eectronic hand throtte. Fu servo contro with either standard (3 way) joysticks or mutifunctiona (7 way) joysticks.

4 LIGHTING AND ELECTRICS TIRES TRACKS 12 vot, negative ground system 1000 cod cranking amp (CCA) battery 95 amp aternator Cab mounted instrument pane with ignition, fue gauge, hour meter, and eectronic throtte Aso incorporated into the instrument pane, is a warning ight custer which aso has audibe aarms for: Low charge pressure Engine water temperature Hydrauic oi pressure Bocked air fiter Engine oi pressure Aternator Cab mounted fuse and reay box designed to keep dirt and water out; IP 69 externa connections; standard battery isoater. Standard 225/260/280/ x pr Standard x 17.5 x 10 pr Avaiabe Options Standard Track - Wide Track Lifemaster Extra Foatation Brawer Soid Industria Foatation tires are fitted for most appications. *For arduous conditions and hostie environments soid tires are recommended. 225T 12.6 in (320 mm) traction ug 17.7 in (450 mm) traction ug 260T/300T/320T 17.7 in (450 mm) traction ug STANDARD EQUIPMENT Isoation mounted canopy. ROPS and FOPS. Fu audibe and visua warning systems. Restraint activated safety system. Loader arm safety strut. Centrifuga dry type engine air fiter with safety eement. Mechanica Quickhitch. Eectronic hand throtte. Front and rear workights. Emergency ower vave. Fue gauge. Hydrauic park brake. Standard fow auxiary hydrauics. Three way joysticks. Rear service access door. Titing screen guard. Titing cab. Mechanica suspension seat. Pod storage area. Cup hoder. Power socket. Rear view mirror. Interior ight. Battery isoator. Creep speed. CONTROLS JCB servo contro (ISO) pattern, provides a drive functions on eft and oader function on right joystick. The eft hand contro pod pivots rearwards, providing unparaeed machine entry / exit. WEIGHT SAE operating weight. Fuy operationa with quickhitch, standard shove, fu fue tank, open canopy + 165b (75kg) operator: 225 8,111 b (3,679 kg) 225T 10,152 b (4,605 kg) 260 8,389 b (3,805 kg) 260T 10,692 b (4,850 kg) 280 8,525 b (3,867 kg) 300T 11,199 b (5,080 kg) 300 8,966 b (4,067 kg) 320T 11,508 b (5,220 kg) 330 9,266 b (4,203 kg) OPTIONAL EQUIPMENT Fuy gazed seaed and pressurized cab with heater/defroster. Air conditioning. Air suspension seat. Road ights. Reverse aarm. Beacon. Foot throtte. Fire extinguisher. Tookit. Sef eveing. Foat. Leve 2 FOPS guard. Heavy Duty Rear door guard. Front screen guard. High fow auxiiary hydrauics. Spark arrestor. Tooth guard. Hydrauic quick hitch. Smooth Ride System. Lexan screen. Independent ifting eyes. Radio. Twine cutter. Three inch seat bet. OPERATOR VISIBILITY With JCB s unique PowerBoom design, not ony is our skid steer the word s safest, but we aso provide our operator with unmatched visibiity. VISIBLE AREAS OBSTRUCTED AREAS JCB 270 o Visibiity Typica Skid Steer 165 o Visibiity

5 ATTACHMENTS Attachment Description Attachment Description Augers Panetary Drive Augers are buit with fabricated boring heads using Forestry Cutting Heads Low profie with patent pending roter design, rotor operates at 1/2 thick pates with 5/8 carriage bots and nuts. 2,000 rpms. Breakers JCB Hammers are among the most efficient avaiabe and are Grappes, Brush Heavy duty unit with open bottom and sides which aows machine to perfecty matched to JCB equipment. carry objects onger than unit width. Brooms, Sweeper Coector For genera sweeping duties around the job site. Grappes, Scrap Heavy duty unit with twin ram grappe and ram guard protection. Brooms, Ange JCB Ange Brooms cover many appications incuding site cean-up, Grappes, Forked Scrap Aows for easy remova of brush, refuge and other oose materias. andscape and ground maintenance, road work and repair. Rakes, Auto JCB Auto Rake is used to groom and finish soi for sod or seed. Brush Cutters For remova of brush and sma trees up to 4 in diameter. Rakes, Landscape Power JCB Landscape Rakes are exceent toos for ceaning up debris, Buckets, 6 in 1 Muti Purpose Genuine JCB 6 in 1 buckets are idea for mutipe appications such as maintaining roads, driveways and finish grading. digging, oading, dozing, grading, spreading, and grabbing. Rakes, Landscape Preparators One soution for genera cean-up, rock remova, and soi preparation. Buckets, Dirt / Genera Purpose Genuine JCB Dirt / Genera Purpose Buckets are recommended where Rock Saws Avaiabe in 48 or 60 diameter for cutting rock and other hard surfaces. maximum breakout performance is required. Siage Defacers Open design aows operator to see bucket face and keeps the attachment Buckets, Landscape Genuine JCB Landscape Buckets are idea when cutting edge visibiity cog free. is important. Snow Bowers Provides exceent visibiity with 25 to 36 shroud opening. Buckets, Light Materia Genuine JCB Light Materia Buckets are speciay designed for ower Snow Bades Avaiabe in various widths for removing snow. density materias such as snow, much, grain. Stump Grinders Provides an environmentay friendy way to safey remove Buckets, Snow High carbon stee bucket with swept top wrap to better contain materia. tree stumps. Cod Paners The JCB Cod Paner is a vauabe too for parking ot and street repairs in Tiers Provides for safe and efficient tiing with choice of 4 or 6 tiing depths. addition to many other uses. Tree Spades Provides safe and efficient remova and panting of trees. Dozer Bades The JCB Dozer Bade is an attachment that is suited for genera grading Trenchers The JCB Trencher is usefu for trenching footings, burying utiities, instaing and and cearing appications. irrigation systems, etc. Forks, Paet Paet Forks are used in a variety of genera forkift appications such as Vibratory Roers Used to compact sand, grave, sois, crushed stone and other aggregates. construction, industria and agricutura industries. Forks, Manure Provides exceent visibiity whie moving oose hay and manure.

6 A GLOBAL COMMITMENT TO QUALITY JCB s tota commitment to its products and customers has heped it grow from a one-man business into one of the word s argest manufacturers of backhoe oaders, crawer excavators, wheeed excavators, teescopic handers, wheeed oaders, dump trucks, rough terrain fork ifts, industria fork ifts, mini/midi excavators, skid steer oaders and tractors. By making constant and massive investments in the atest production technoogy, the JCB factories have become some of the most advanced in the word. By eading the fied in innovative research and design, extensive testing and stringent quaity contro, JCB machines have become renowned a over the word for performance, vaue and reiabiity. And with an extensive deaer saes and service network in over 150 countries, we aim to deiver the best customer support in the industry. Through setting the standards by which others are judged, JCB has become one of the word s most impressive success stories. DWUSA /11 JCB Headquarters Savannah, 2000 Bamford Bvd., Savannah, GA Te: Fax: JCB reserves the right to change design, materias and/or specifications without notice. Specifications are appicabe to units sod in the United States and Canada. The JCB ogo is a registered trademark of J C Bamford Excavators Ltd.