JCB SKID STEER & COMPACT TRACK LOADER RANGE

Transcription

1 NEW JCB SKID STEER & COMPACT TRACK LOADER RANGE JCB SKID STEER & COMPACT TRACK LOADER RANGE

2 REDEFINING skid steers Contents Strength and durabiity...pages 4 5 Unique design....pages 6 7 Power and performance...pages 8 9 A sound investment...pages Operator comfort... pages Serviceabiity... pages Range specifications....pages Vaue added...page 21 A few words about JCB....pages SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

3 REDEFINING SKID STEERS SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T TM320 ARTICULATED TELESCOPIC HANDLER 3

4 STRENGTH AND DURABILITY. BEFORE YOU BUY A SKID STEER OR COMPACT TRACK LOADER, YOU NEED TO KNOW IT S GOING TO BE TOUGH ENOUGH TO PERFORM ANY JOB YOU ASK OF IT. FORTUNATELY, WITH JCB, STRENGTH AND DURABILITY COME STANDARD. One-of-a-kind boom. 1 The PowerBoom structure provides a safe route for hydrauic hoses so that they re we protected from damage. 2 To ensure optimum precision and buid quaity, we use advanced manufacturing and assemby processes during the manufacture of key components. 1 JCB skid steer oaders and compact track oaders benefit from our unique PowerBoom design a singe-sided reinforced high tensie strength stee boom, with interna baffe pates for added strength. 2 Buit to ast. 3 Our engine technoogy is tried and proven; we ve buit 200,000 DIESELMAX units since To ensure simiar ongevity, the EcoMAX T4 Fina/ Stage 3B engine has been tested for 110,000 hours in 70 different machines across the toughest appications and environments. 4 A arge oader arm cross-member provides added strength: vita for when you re using a standard mechanica quickhitch or the optiona powered variant SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

5 UNEARTHED: KEY FACT A singe JCB PowerBoom boasts up to 20% more stee than our rivas twin-arm designs. STRENGTH AND DURABILITY Structura strength. 5 We ve designed the door to be stiff and durabe for added structura strength and rigidity. 6 Another area that boosts rigidity and service ife is the singe-piece chassis. 7 Expect durabe forged stee axes and a strong chain (100 HS on LP modes, 80 HS on SP modes). 8 Track retention is exceent on our compact track oaders, courtesy of a soid undercarriage with cast stee tripe-fanged roers. 6 9 To keep the fue tank protected, it s mounted inside the oader tower; there s aso an easiy accessibe drain port SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T TM320 ARTICULATED TELESCOPIC HANDLER 5

6 UNIQUE DESIGN. THE JCB SKID STEER AND COMPACT TRACK LOADER RANGE HELP YOU TO WORK HARDER WITH LESS EFFORT. FOR EXAMPLE, THANKS TO JCB S INNOVATIVE DESIGN, OPERATORS CAN ACCESS THE MACHINE WITHOUT NEEDING TO REMOVE LOADS OF MATERIAL. 2 Safey does it. 1 JCB s excusive eft-hand-side entry system aows operators to access the oader without having to cimb over arge cumbersome attachments or under an unsupported boom. 2 The emergency exit on a JCB skid steer or compact track oader is via the front of the machine, as opposed to via the sma rear window as per traditiona twin-arm designs. 1 6 SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

7 Visiby better. 3 With a 270 fied of vision, our oaders have up to 60% better visibiity than riva machines (which offer around 165 ). 4 PowerBoom s singe-arm ow-sung design means there s exceent visibiity to both the eft and right side of the machine. 5 There s a standard-fit rear view mirror at the operator s eye eve for easy rearward visibiity. 6 Part of the reason why visibiity is so good on a JCB skid steer or compact track oader is that our EcoMAX engine doesn t require buky after-treatment, making instaation more compact. Because JCB s unique PowerBoom design doesn t need a rear torque tube on vertica ift modes, visibiity is further improved. UNEARTHED: KEY FACT We use aminate gass instead of mesh, providing operators with unhindered a-around visibiity. 5 UNIQUE DESIGN Ordinary Skid Steer 165º Visibiity JCB Skid Loader 270º Visibiity SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T TM320 ARTICULATED TELESCOPIC HANDLER7 7

8 POWER AND PERFORMANCE. POWER AND PERFORMANCE ARE QUALITIES EVERYONE WANTS IN A SKID STEER OR COMPACT TRACKED LOADER. WITH PLENTY OF POWER AND TONS OF VERSATILE FEATURES, THE JCB RANGE SETS NEW STANDARDS OF EFFICIENCY AND PRODUCTIVITY. 1 Versed in versatiity. 1 For the utimate in versatie performance, our high fow hydrauics mean you can choose from a huge range of 31 different attachment types. 2 Operators can use an even wider variety of hydrauic attachments with our optiona 7-way muti-function joystick. 3 Our standard mechanica or optiona powered quickhitches are designed to meet stringent JCB standards; they make for quick and efficient attachment changes SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

9 NO COMPROMISE POWER AND ON PERFORMANCE VERTICAL LIFT: With maximum ift capacity at maximum height and reach, this is a good choice for oad and carry operations ike fork work, heavy construction and andscaping. RADIAL LIFT: This provides improved digging geometry with more reach at the midpoint of the ift cyce. It s perfect for excavating appications ike andscaping, digging, excavation, asphat work, farming, street construction and industria tasks. Maximum output. 4 The 300 cass modes now feature variabe dispacement piston pump hydrauics for faster cyce times and smoother muti functioning. 5 JCB s Smoothride System (SRS) aows the boom and oad to move independenty of the chassis, ensuring improved oad retention and operator comfort. In turn, this means faster oading cyces and journey times. 6 Optiona parae ift heps to keep oads eve throughout the ift cyce, which is idea for carrying paetized oads SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T 9

10 A SOUND INVESTMENT A JCB SKID STEER AND COMPACT TRACK LOADER ISN T JUST EFFICIENT TO USE IT S ALSO EFFICIENT TO OWN AND OPERATE. WE VE DESIGNED THESE MACHINES TO GIVE YOU GREAT FUEL EFFICIENCY, UNPARALLELED RESALE VALUE AND LOW RUNNING COSTS FOR MAXIMUM RETURN ON INVESTMENT EcoMAX efficiency. 1 Our T4 Fina EcoMAX engine uses up to 9% ess fue than our Tier 3 units, saving you money. 4 2 EcoMAX produces its peak torque at ow revs for fue-efficient matching of the transmission and hydrauics. 3 Because this engine doesn t require costy exhaust after-treatment or heat-resistant ube ois, it saves money on servicing. ECOMAX ENGINE Wheeed 225, 260, 280, 300, 330 Tracked 225T, 260T, 300T, 320T 4 EcoMAX can be remapped to operate on ow quaity fues. This means these oaders can be resod across different territories, improving residuas. 10 SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

11 A SOUND INVESTMENT JCB DIESEL BY KOHLER ENGINE Wheeed 135, 155, 175, 190, 205 Tracked, 150T, 190T, 205T 6 7 More for your money. 5 JCB s optiona 2-speed transmission heps these machines achieve quicker trave and cyce times. 6 Cooing is extremey efficient, with owertemperature air pued from the top of the cooing pack and expeed through the sides and rear; this improves overa performance. 5 JCB Diese by Koher engine design. 7 Choose one of our smaer skid steer or compact track oaders and you benefit from a JCB Diese by Koher KDI T4F engine: it features a maintenance-free diese-oxidation catayst (DOC) and offers improved torque and fue efficiency. The KDI 1903 TLR and KDI 2504 TLR engines feature an advanced combustion system that significanty reduces emissions and fue consumption. Like the JCB EcoMAX unit, JCB Diese by Koher s KDI engine doesn t use exhaust after-treatment ike a DPF. Operating costs and maintenance are therefore minimized. SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T 11

12 OPERATOR COMFORT. FOR A MACHINE TO PROVIDE MAXIMUM EFFICIENCY, IT NEEDS TO BE INTUITIVE AND COMFORTABLE TO OPERATE. WITH THAT IN MIND, WE VE DESIGNED THE JCB SKID STEER AND COMPACT TRACK LOADER RANGE TO PROVIDE THE MOST ERGONOMIC OPERATOR ENVIRONMENT POSSIBLE. 2 1 Comfort and convenience. 1 Access to a JCB skid steer or compact track oader is provided via a door that s more than doube the size of riva offerings. 2 Our cab is quite simpy in a cass of its own; we offer a 33% arger operator environment in our arge patform machines. On sma patform modes, meanwhie, the cab is as much as 46% bigger. 3 There s a fuy adjustabe mechanica suspension seat (or an optiona heated air suspension variant) for optimum comfort. 4 Ventiation is exceent on a modes fitted with a cab, thanks to a siding window on the eft side. 5 To make the cab an even better working environment, there s handy storage in the eft arm rest as we as a 12V socket SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

13 OPERATOR COMFORT 6 Aways in contro. 7 6 Three settings aow operators to choose the sensitivity of joystick movement; this makes it quick and straightforward to taior contros to specific tasks or conditions. 7 Low effort contros make it easier to operate one of these oaders. An optiona muti-function joystick enabes operators to use a wide array of hydrauic attachments. 8 For increased ergonomics, we offer optiona switchabe ISO/H-pattern contros. 9 Contros to various machine options are ergonomicay paced at roof eve in the operator s ine of sight. 10 The right contro pane features machine diagnostics, an eectronic throtte and the skid steer s ignition switch SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T 13

14 SERVICEABILITY. WE VE DESIGNED JCB SKID STEER AND COMPACT TRACK LOADERS TO BE AFFORDABLE, EFFICIENT AND HIGHLY PRODUCTIVE IN ALL SORTS OF AREAS. NOT LEAST BY MAKING THEM LOW MAINTENANCE AND EASY TO SERVICE. 3 1 Simpe servicing. 1 The T4F JCB EcoMAX engine doesn t require a Diese Particuate Fiter (DPF), which simpifies servicing and reduces operating costs. 2 Sma patform oaders within the range are fitted with a JCB Diese by Koher KDI T4F motor featuring a maintenance-free diese-oxidation catayst (DOC). 2 3 A of your oader s daiy maintenance points are easiy accessed via a arge rear service door. 14 SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T

15 SERVICEABILITY UNEARTHED: KEY FACT It ony takes one person to tit the cab for exceent access to your oader s internas. 4 4 When it comes to more compex maintenance, our titing cab design ensures easy access to key components. 5 To keep vita eements ike the cooing pack free of debris, you can opt for a reversing fan that automaticay reverses airfow every 30 minutes. This feature can aso be operated with a button on the eft-hand contro pane. 6 On arger skid steer or compact track oaders, there s a standard-fit air intake scavenge system, which keeps debris buid-up in the air fiter to a minimum. In turn, this extends service intervas. 7 Hydrauics on these oaders use O-ring face seas and incorporate 38 percent fewer parts than outgoing designs. The end resut is reduced downtime SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T 15

16 SPECIFICATION SKID STEER AND COMPACT TRACK LOADER I I M J M J G F E D G F E D L P C L P C N K H A B O O N K H A B STATIC DIMENSIONS Machine mode A Overa Length ft-in (m) 11-5 (3.49) 11-5 (3.49) 11-7 (3.53) 11-8 (3.56) (3.61) B Whee Base ft-in (m) 3-6 (1.07) 3-6 (1.07) 3-6 (1.07) 3-6 (1.07) 3-6 (1.07) C Ange of Departure degrees D Overa Height ft-in (m) 6-6 (1.98) 6-6 (1.98) 6-6 (1.98) 6-6 (1.98) 6-6 (1.98) E Dump Height ft-in (m) 7-5 (2.26) 7-5 (2.26) 7-5 (2.26) 7-5 (2.26) 7-5 (2.26) F Loadover Height ft-in (m) 9-4 (2.84) 9-4 (2.84) 9-4 (2.84) 9-4 (2.84) 9-4 (2.84) G Height to Hinge Pin Fuy Raised ft-in (m) 9-10 (3.00) 9-10 (3.00) 9-10 (3.00) 9-10 (3.00) 9-10 (3.00) H Ground Leve (cutting edge) ft-in (m) 3-3 (1.00) 3-3 (1.00) 3-3 (1.00) 3-3 (1.00) 3-3 (1.00) I Max Fu Height ft-in (m) 3-0 (.91) 3-0 (.91) 3-2 (.97) 3-3 (.99) 3-5 (1.04) J Fu Height - Fuy Dumped ft-in (m) 1-10 (.56) 1-10 (.56) 2-9 (.86) 2-9 (.86) 2-9 (.86) K Dig Depth (toe pate horizonta) Cearance in (mm) -0.4 (-10) -0.4 (-10) -0.4 (-10) -0.4 (-10) -0.4 (-10) L Ground degrees M Dump Ange degrees N Bucket Width - Standard ft-in (m) 5-0 (1.52) 5-6 (1.68) 5-6 (1.68) 5-8 (1.73) 6-0 (1.83) Bucket Width - Optiona ft-in (m) 4-6 (1.37) 5-0 (1.52) 5-8 (1.73) 6-0 (1.83) 5-8 (1.68) O Width Over Tires - Standard ft-in (m) 4-11 (1.52) 5-3 (1.60) 5-3 (1.60) 5-3 (1.60) 5-3 (1.60) Width Over Tires - Optiona ft-in (m) 4-5 (1.37) 5-0 (1.52) 5-0 (1.52) 5-0 (1.52) 5-0 (1.52) Rated Operating Capacity 50% b SAE (kg) 1350 (612.3) 1550 (703.1) 1750 (793.8) 1900 (861.8) 2050 (929.9) Bucket Capacity - Standard yd³ (m³).47 (.36).52 (.40).52 (.40).53 (.41).57 (.44) Turning Radius Bucket Corner Radius ft-in (m) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) Quick Hitch Radius ft-in (m) 3-7 (1.10) 3-7 (1.10) 3-9 (1.14) 3-9 (1.14) 3-9 (1.14) Rear Chassis Radius ft-in (m) 5-5 (1.65) 5-5 (1.65) 5-5 (1.65) 5-5 (1.65) 5-5 (1.65) P Ground Cearance in (mm) 8.3 (210) 8.3 (210) 8.3 (210) 8.3 (210) 8.3 (210) Lift Path Radia Radia Vertica Vertica Vertica STATIC DIMENSIONS Machine mode A Overa Length ft-in (m) 12-2 (3.69) 12-2 (3.69) 12-4 (3.76) 12-5 (3.78) 12-7 (3.80) B Whee Base ft-in (m) 4-0 (1.22) 4-0 (1.22) 4-0 (1.22) 4-0 (1.22) 4-0 (1.22) C Ange of Departure degrees D Overa Height ft-in (m) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) 6-11 (2.11) E Dump Height ft-in (m) 8-1 (2.46) 8-1 (2.46) 8-1 (2.46) 8-1 (2.46) 8-2 (2.49) F Loadover Height ft-in (m) 9-10 (3.02) 9-10 (3.02) 9-10 (3.02) 9-10 (3.02) 10 (3.05) G Height to Hinge Pin Fuy Raised ft-in (m) 10-5 (3.175) 10-5 (3.175) 10-5 (3.175) 10-5 (3.175) 10-6 (3.2) H Ground Leve ft-in (m) (0.98) (0.98) (0.98) 3-5 (1.04) 3-5 (1.04) I Max Fu Height ft-in (m) 3-2 (.96) (1.23) (1.23) (1.23) 3-11 (1.2) J Fu Height - Fuy Dumped ft-in (m) 1-11 (.59) 2-10 (0.87) 2-10 (0.87) 2-11 (0.90) 2-11 (0.90) K Dig Depth (toe pate horizonta) Cearance in (mm) -3/8 (-10) -3/8 (-10) -3/8 (-10) -3/8 (-10) 0 L Ground degrees M Dump Ange degrees N Bucket Width - Standard ft-in (m) 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-6 (1.98) O Width Over Tires - Standard ft-in (m) 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-0 (1.82) 6-2 (1.87) Width Over Tires - Optiona ft-in (m) 6-2 (1.87) 6-2 (1.87) 6-2 (1.87) 6-2 (1.87) 6-0 (1.82) Rated Operating Capacity 50% b SAE (kg) 2250 (1021) 2600 (1179) 2800 (1270) 3000 (1361) 3295 (1495) Bucket Capacity - Standard yd³ (m³).62 (.47).62 (.47).62 (.47).67 (.51).67 (.51) Bucket Capacity - Standard yd³ (m³).47 (.36).52 (.40).52 (.40).53 (.41).57 (.44) Turning Radius Bucket Corner Radius ft-in (m) 7-3 (2.20) 7-3 (2.20) 7-3 (2.20) 7-3 (2.20) 7-3 (2.20) Quick Hitch Radius ft-in (m) (1.48) (1.48) (1.48) (1.48) (1.48) Rear Chassis Radius ft-in (m) (1.76) (1.76) (1.76) (1.76) (1.76) P Ground Cearance in (mm) 9.4 (238) 9.4 (238) 9.4 (238) 9.4 (238) 9.8 (248) Lift Path Radia Vertica Vertica Vertica Vertica

17 SKID STEER AND COMPACT TRACK LOADER SPECIFICATION I I M J M J G F E D G F E D L P C L P C N K H A B O O N K H A B STATIC DIMENSIONS - SMALL PLATFORM TRACKED Machine mode 150T 190T 205T A Overa Length ft-in (m) 11-5 (3.49) 11-7 (3.53) 11-9 (3.58) B Track Base ft-in (m) 5-10 (1.78) 5-10 (1.78) 5-10 (1.78) C Ange of Departure degrees D Overa Height ft-in (m) 6-7 (2.00) 6-7 (2.00) 6-7 (2.00) E Dump Height ft-in (m) 7-6 (2.29) 7-6 (2.29) 7-6 (2.29) F Loadover Height ft-in (m) 9-4 (2.85) 9-4 (2.85) 9-4 (2.85) G Height to Hinge Pin Fuy Raised ft-in (m) 9-11 (3.02) 9-11 (3.02) 9-11 (3.02) H Ground Leve ft-in (m) 3-7 (1.09) 3-3 (1.00) 3-3 (1.00) I Max Fu Height ft-in (m) 3-3 (0.99) 4-0 (1.21) 4-0 (1.21) J Fu Height - Fuy Dumped ft-in (m) 2-1 (0.64) 2-9 (0.85) 2-9 (0.85) K Dig Depth Cearance in (mm) -0.4 (-10) -0.4 (-10) -0.4 (-10) L Ground degrees M Dump Ange degrees N Bucket Width - Standard ft-in (m) 5-8 (1.73) 5-8 (1.73) 6-0 (1.83) Bucket Width - Optiona ft-in (m) 5-6 (1.68) 6-0 (1.83) 5-8 (1.73) O Width Over Tracks - Standard ft-in (m) 5-5 (1.65) 5-5 (1.65) 5-5 (1.65) Rated Operating Capacity 35% b SAE (kg 1500 (680.4) 1900 (861.8) 2050 (929.9) Rated Operating Capacity 50% b SAE (kg) 2167 (982) 2714 (1231) 2928 (1328) Bucket Capacity - Standard yd³ (m³).53 (.41).53 (.41).57 (.44) Turning Radius Bucket Corner Radius ft-in (m) 6-10 (2.09) 6-10 (2.09) 6-10 (2.09) Quick Hitch Radius ft-in (m) 3-9 (1.10) 3-9 (1.14) 3-9 (1.14) Rear Chassis Radius ft-in (m) 5-5 (1.65) 5-5 (1.65) 5-5 (1.65) P Ground Cearance in (mm) 9.1 (230) 9.1 (230) 9.1 (230) Ground Bearing Pressure* psi (Kp) 6.75 (46.6) 6.20 (42.6) 6.50 (44.5) Lift Path Radia Vertica Vertica STATIC DIMENSIONS - LARGE PLATFORM TRACKED Machine mode 225T 260T 300T 320T A Overa Length ft-in (m) 12-2 (3.69) 12-2 (3.69) 12-5 (3.78) 12-5 (3.78) B Track Base ft-in (m) 6-11 (2.1) 6-11 (2.1) 6-11 (2.1) 6-11 (2.1) C Ange of Departure degrees D Overa Height ft-in (m) 6-10 (2.08) 6-10 (2.08) 6-10 (2.08) 6-10 (2.08) E Dump Height ft-in (m) 7-11 (2.42) 7-11 (2.42) 7-10 (2.39) 7-10 (2.39) F Loadover Height ft-in (m) 9-10 (2.99) 9-10 (2.99) 9-10 (2.99) 9-10 (2.99) G Height to Hinge Pin Fuy Raised ft-in (m) 10-5 (3.18) 10-5 (3.18) 10-5 (3.18) 10-5 (3.18) H Ground Leve ft-in (m) 3-2 (0.96) 3-2 (0.96) 3-5 (1.04) 3-5 (1.04) I Max Fu Height ft-in (m) 3-1 (.935) 4 (1.21) 4.3 (1.30) 4.3 (1.30) J Fu Height - Fuy Dumped ft-in (m) 1-11 (.585) (0.87) 2-11 (0.90) 2-11 (0.90) K Dig Depth Cearance in (mm) -3/8 (-10) -3/8 (-10) -3/8 (-10) -3/8 (-10) L Ground degrees M Dump Ange degrees N Bucket Width - Standard ft-in (m) 6-6 (1.98) 6-6 (1.98) 7-0 (2.13) 7-0 (2.13) O Width Over Tracks - Standard ft-in (m) 6-1 (1.85) 6-6 (1.98) 6-6 (1.98) 6-6 (1.98) Rated Operating Capacity 35% b (kg) 2250 (1021) 2600 (1179) 3000 (1361) 3200 (1452) Rated Operating Capacity 50% b (kg) 3214 (1458) 3994 (1812) 4314 (1957) 4573 (2074) Bucket Capacity - Standard yd³ (m³).79 (.59).79 (.59).84 (.64).84 (.64) Bucket Capacity - Optiona yd³ (m³).52 (.40).52 (.40).53 (.41).57 (.44) Turning Radius Bucket Corner Radius ft-in (m) (2.24) (2.24) (2.24) (2.24) Quick Hitch Radius ft-in (m) (1.48) (1.48) (1.48) (1.48) Rear Chassis Radius ft-in (m) 5.95 (1.76) 5.95 (1.76) 5.95 (1.76) 5.95 (1.76) P Ground Cearance in (mm) 9.8 (248) 9.8 (248) 9.8 (248) 9.8 (248) Ground Bearing Pressure* psi (Kp) 4.36 (30.1) 4.6 (31.7) 4.8 (33.1) 4.9 (33.8) Lift Path Radia Vertica Vertica Vertica B

18 SPECIFICATION SKID STEER AND COMPACT TRACK LOADER HYDRAULIC PERFORMANCE - SMALL PLATFORM Machine mode R.O.C b (kg) Tipping Load b (kg) Loader Lift b (kg) Bucket Tit b (kg) (612) 2989 (1356) 3175 (1440) 4012 (1820) (703) 3100 (1406) 3902 (1770) 4012 (1820) (794) 3500 (1587) 3461 (1570) 4718 (2140) (862) 3800 (1723) 3461 (1570) 4718 (2140) (930) 4100 (1859) 3461 (1570) 4718 (2140) 150T 1500 (680) 4334 (1966) 3902 (1770) 4012 (1820) 190T 1900 (862) 5429 (2462) 3461 (1570) 4718 (2140) 205T 2050 (930) 5857 (2656) 3461 (1570) 4718 (2140) HYDRAULIC PERFORMANCE - LARGE PLATFORM Machine mode R.O.C b (kg) Tipping Load b (kg) Loader Lift b (kg) Bucket Tit b (kg) (1021) 4908 (2226) 5884 (2669) 5699 (2585) (1179) 5448 (2471) 5884 (2669) 5699 (2585) (1270) 5608 (2543) 5884 (2669) 5699 (2585) (1361) 6024 (2732) 5809 (2634) 7187 (3260) (1495) 6590 (2989) 5809 (2634) 7187 (3260) 225 T 2250 (1021) 6428 (2915) 5884 (2669) 5699 (2585) 260 T 2600 (1179) 7991 (3624) 5809 (2634) 7187 (3260) 300 T 3000 (1361) 8628 (3913) 5809 (2634) 7187 (3260) 320 T 3200 (1452) 9145 (4148) 5809 (2634) 7187 (3260) HYDRAULICS - SMALL PLATFORM In addition to the main hydrostatic drive pumps, there is a dedicated oader and attachments suppy pump (auxiiary hydrauics circuit standard on a base modes). High fow is optiona on a modes except the 135. HYDRAULICS - LARGE PLATFORM In addition to the main hydrostatic drive pumps, there is a dedicated oader and attachments suppy pump (auxiiary hydrauics circuit standard on a base modes). Pump Fow: 18.5 gpm ( rpm engine speed Main reief pressure 3335 psi (230 bar) HYD HP Low Fow (36.0)* HYD HP High Fow (51.4)* *cacuated Pump Fow: 24 gpm ( rpm engine speed Main reief pressure 3335 psi (230 bar) HYD HP Low Fow (46.7)* HYD HP High Fow (64.2)* *cacuated Low ever efforts give exceent and easy contro of transmission oader and attachments. Low ever efforts give exceent and easy contro of transmission oader and attachments. Auxiiary hydrauics are actuated via the right hand controer giving progressive contro of oi fow for precise attachment contro (eft hand controer ocation on opriona 7 way muti-function joysticks. Auxiiary hydrauics are actuated via the right hand controer giving progressive contro of oi fow for precise attachment contro. Loader arm hydrauic ines under protective stee guard on PowerBoom. Loader arm hydrauic ines under protective stee guard on PowerBoom. Canister stye, fu fow, hydrauic oi fiter. Canister stye, fu fow, hydrauic oi fiter. JCB engine oi for engine and chain case. JCB engine oi for engine and chain case. JCB hydrauic oi. JCB hydrauic oi. The optiona High Fow circuit provides 26.4 ga/min (100 iters/min) pump fow to the front of the machine for operation of high capacity attachments such as trenchers and cod paners. The optiona High Fow circuit provides 33 ga/min (125 iters/min) pump fow to the front of the machine for operation of high capacity attachments such as trenchers and cod paners. CAPACITIES - SMALL PLATFORM CAPACITIES - LARGE PLATFORM ga () Hydrauic System (incuding tank) 11.1 (42) Fue Tank 25.9 (98) Engine Cooant 4.0 (15) Engine Oi 2.6 (10) LH Chaincase (wheeed machines ony) 2.0 (7.6) RH Chaincase (wheeed machines ony) 2.0 (7.6) ga () Hydrauic System (incuding tank) 15.9 (60) Fue Tank 27.2 (103) Engine Cooant 4.1 (15.5) Engine Oi 3.7 (14) LH Chaincase (wheeed machines ony) 3.1 (11.7) RH Chaincase (wheeed machines ony) 3.1 (11.7)

19 SKID STEER AND COMPACT TRACK LOADER SPECIFICATION ENGINE - SMALL PLATFORM /175/150T 190/205/190T/205T Mode Koher KDI 1903 TCR Koher KDI 1903 TCR Koher KDI 2504 TCR Dispacement in3 (cm3) (1,860) (1,860) (2,481) Fue Diese Diese Diese Cooing Liquid Liquid Liquid Aspiration Turbo Turbo Turbo Gross 2800 rpm SAE J1995 hp (kw) 48 (36) 56 (42) 62 (46) Gross 1200 rpm SAE J1995 b/ft (Nm) (225) (225) (300) Starter Motor hp (kw) 2.72 (2) 2.72 (2) 2.72 (2) Battery V/Ah 12/109 12/109 12/109 Aternator amps Emission Certification EPA-T4F (EU St3B) EPA-T4F(EU St3B) EPA-T4F(EU St3B) Engine Oi Service Interva Hours Variabe Speed Hydrauicay Driven Fan YES YES YES ENGINE - LARGE PLATFORM 225/260/280/225T/260T/300/330/300T/320T Mode EcoMAX TCAE-55 Dispacement in3 (cm3) 268 (4399) Fue Diese Cooing Water Aspiration Turbo Gross 2400 rpm SAE J1995 hp (kw) 74 (55) Gross 1200 rpm SAE J1995 b/ft (Nm) 295 (400) Starter Motor hp (kw) 5.63 (4.2) Battery V/Ah 12 / 109 Aternator amps 95 Emission Certification EPA-T4F (EU St3B) Engine Oi Service Interva Hours 500 Variabe Speed Hydrauicay Driven Fan YES CAPACITIES - SMALL PLATFORM CAPACITIES - LARGE PLATFORM A fu servo controed hydrostatic transmission giving zero to maximum speed, both forward and reverse at fu power. Independent transmission systems for both the eft and right side, controed through servo contros for both precise and easy operation. Transmission power system maintains fu engine power avaiabiity maximizing oader and attachment contro. Mode Singe Speed Two Speed mph (km/h) mph (km/h) / mph (km/h) Trave Speeds 135: 7.5 (12.0) N/A Trave Speeds 155/175/190/205: 7.5 (12.0) 5.6 (9.0) / 11.5 (18.5) Trave Speeds 150T/190T/205T: 6.2 (10.0) 5.6 (9.0) / 7.8 (12.6) A fu servo controed hydrostatic transmission giving zero to maximum speed, both forward and reverse at fu power. Independent transmission systems for both the eft and right side, controed through servo contros for both precise and easy operation. Transmission power system maintains fu engine power avaiabiity maximizing oader and attachment contro. Mode Singe Speed Two Speed mph (km/h) mph (km/h) / mph Trave Speeds 225/260/280/300: 6.8 (10.9) 6.8 (10.9) / 12.4 (20) Trave Speeds 330: 7.3 (11.7) 7.3 (11.7) / 13.5 (21.7) Trave Speeds 225T/260T/300T/320T: 5.7 (9.2) 4.8 (7.7) / 7.8 (12.6) TIRES / TRACKS - SMALL PLATFORM TIRES / TRACKS - LARGE PLATFORM TIRES Standard 135/ x PR Standard Track Fotation Standard 175/190/ x 16.5 x 8 PR Wide Track Fotation Avaiabe Options Standard Track - Wide Track Lifemaster Industria Pneumatic 31.5 / 13 x 16.5 Extra Foatation Brawer Soid Industria Foatation tires are fitted for most appications. TRACKS A Track Modes 12.6 in (320 mm) traction ug TIRES Standard 225/260/280/ x PR Standard x 17.5 x 10 PR Avaiabe Options Standard Track - Wide Track Lifemaster Industria Pneumatic 33 / 15.5 x 16.5 Extra Foatation Brawer Soid Industria Foatation tires are fitted for most appications. TRACKS 225T/260T 12.6 in (320 mm) traction ug 17.7 in (450 mm) traction ug 300T/320T 17.7 in (450 mm) traction ug *For arduous conditions and hostie environments soid tires are recommended. *For arduous conditions and hostie environments soid tires are recommended.

20 SPECIFICATION SKID STEER AND COMPACT TRACK LOADER WEIGHT - SMALL PLATFORM SAE Operating Weight Fuy operationa with quickhitch, standard shove, fu fue tank, open canopy b (75 kg) operator: b (2791 kg) b (3200 kg) 150T 8137 b (3691 kg) b (2883 kg) b (3310 kg) 190T 8355 b (3790 kg) b (3050 kg) 205T 8734 b (3962 kg) LIGHTING AND ELECTRICS- SMALL PLATFORM 12 V, negative ground system 1,000 cod cranking amp (CCA) battery amp aternator Cab mounted instrument pane with ignition, fue gauge, hour meter, 155 and Above 100 amp aternator and eectronic throtte Aso incorporated into the instrument pane, is a warning ight custer which aso has audibe aarms for: Low charge pressure Bocked air fiter Engine water temperature Engine oi pressure Hydrauic oi pressure Aternator Cab mounted fuse and reay box designed to keep dirt and water out; IP 69 externa connections; standard battery isoater. WEIGHT - LARGE PLATFORM SAE Operating Weight Fuy operationa with quickhitch, standard shove, fu fue tank, open canopy b (75 kg) operator: b (3608 kg) b (4107 kg) 225T 10,216 b (4634 kg) b (3734 kg) b (4243 kg) 260T 10,756 b (4879 kg) b (3796 kg) 300T 11,287 b (5120 kg) 320T 11,596 b (5260 kg) LIGHTING AND ELECTRICS - LARGE PLATFORM 12 V, negative ground system 1,000 cod cranking amp (CCA) battery 95 amp aternator Cab mounted instrument pane with ignition, fue gauge, hour meter, and eectronic throtte Aso incorporated into the instrument pane, is a warning ight custer which aso has audibe aarms for: Low charge pressure Bocked air fiter Engine water temperature Engine oi pressure Hydrauic oi pressure Aternator Cab mounted fuse and reay box designed to keep dirt and water out; IP 69 externa connections; standard battery isoater. STARNDARD EQUIPMENT - ALL MODELS Isoation mounted canopy. ROPS and FOPS. Fu audibe and visua warning systems. Restraint activated safety system. Loader arm safety strut. Centrifuga dry type engine air fiter with safety eement. Mechanica quickhitch. Eectronic hand throtte. Two front and one rear workight. Emergency ower vave. Fue gauge. Hydrauic park brake. Standard Fow auxiary hydrauics. Three way joysticks. Rear service access door. Titing cab. Static seat in wheeed. Mechanica suspension in tracked. Foat. Pod storage area. Cup hoder. Power socket. Rear view mirror. Interior ight. Battery isoator. OPTIONAL EQUIPMENT - ALL MODELS Seaed and pressurized cab with heater/defroster. Air conditioning (155 and above). Mechanica and air suspension seats. Road ights. Beacon. Foot throtte. Fire extinguisher. Tookit. Sef eveing. Leve 2 FOPS guard. Heavy-duty rear door guard. Front screen guard. High Fow auxiiary hydrauics (155 and above). Spark arrestor. Tooth guard. Powered quickhitch. Smooth Ride System (155 and above). Lexan screen. Radio. Twine cutter (wheeed units ony). Three inch seat bet. Creep speed. 1S0/H pattern changeover. Fenders. Reversing fan. Pre-ceaner. OPERATOR ENVIRNOMENT - ALL MODELS Fu ROPS and Leve 1 FOPS with optiona Leve 2 FOPS guard for demoition, fu audio and visua warning system. Soundproofing gives noise eves compying with EC reguations. Cab access through side door due to JCB s PowerBoom design. Deuxe environment avaiabe in either open canopy, cab with heat, or cab with heat and A/C (155 and Above) Unequaed a-around visibiity. Fuy adjustabe seat. Retractabe seat bet fitted as standard. Drainage cover for easy drainage of cab. Fu servo contro with either standard (3 way) joysticks or optiona JCB muti-function (7-way) joysticks. CONTROLS - ALL MODELS JCB servo contro (ISO) pattern, provides a drive functions on eft and oader function on right joystick. The eft hand contro pod pivots rearwards, providing unparaeed machine entry / exit. ATTACHMENTS Over 31 different famiies of attachments provides utimate versatiity. A brochure isting the fu range of attachments is avaiabe.

21 VALUE ADDED. VALUE VALUE ADDED ADDED JCB S WORLDWIDE CUSTOMER SUPPORT IS FIRST CLASS. WHATEVER YOU NEED AND WHEREVER YOU ARE, WE LL BE AVAILABLE QUICKLY AND EFFICIENTLY TO HELP MAKE SURE YOUR MACHINERY IS PERFORMING TO ITS FULL POTENTIAL. 1 Our Technica Support Service provides instant access to factory expertise, day or night, whie our Finance and Insurance teams are aways on hand to provide fast, fexibe, competitive quotes. 2 The goba network of JCB Parts Center is another mode of efficiency; with 15 regiona bases, we can deiver around 95% of a parts anywhere in the word within 24 hours. Our genuine JCB parts are designed to work in perfect harmony with your machine for optimum performance and productivity. 1 3 JCB Assetcare offers comprehensive extended warranties and service agreements, as we as service-ony or repair and maintenance contracts. Regardess of what you opt for, our maintenance teams around the word charge competitive abor rates, and offer non-obigation quotations as we as fast, efficient insurance repair work. 2 3 SKID STEER AND COMPACT TRACK LOADER 135/155/175/190/205/225/260/280/300/330/150T/190T/205T/225T/260T/300T/320T 21

22 A few words about JCB Sir Anthony Bamford, the son of Mr. JCB, sti runs the company today. A famiy company on a goba scae JCB is no ordinary company. From the dreams of one man, Joseph Cyri Bamford, we have grown into the word s argest privatey owned construction equipment company by voume. Since 1945, the same attention to detai, passion for progress and famiy spirit has taken us from strength to strength. Nowadays, JCB operates across a five continents, manufacturing at 22 factories in the UK, Brazi, Germany, China, North America and India. With 1,500 deaerships and depots seing and supporting our products in over 150 countries, we are one of the top three manufacturers of construction equipment with some of the finest engineering faciities in the word. A history of word-cass innovation Our business has aways been driven by innovation, using ony the most advanced technoogy, components and processes, meticuous design and rigorous testing. Evidence of this doesn t come much more powerfu than our revoutionary JCB Diesemax engine. Having grabbed the headines when it smashed the word and speed record at mph, it is now providing our customers with tomorrow s performance today. Sustainabiity in a we do As a manufacturer of working machinery, operating in both estabished and emerging markets, we accept the chaenge of heping to deiver economic and environmenta sustainabiity. Product innovations that provide the right soutions to our customers have been a vita part of our history and wi be key to our sustainabe future. But in addition to deveoping ceaner and more efficient machines, we have a commitment to ensuring our manufacturing faciities meet the highest environmenta standards. A commitment to our customers that goes on That s a fact we remind ourseves of constanty, and it s the reason our customers are at the heart of everything we do. Whatever a customer needs, we make it our mission to provide word-cass support and 100% satisfaction. At the heart of this is a dedication to minimizing machine downtime. So our state-of-the-art Word Parts Center dispatches more than a miion genuine parts and attachments every week, with an Anywhere in 24 hours strategy. Our JCBtrained technicians provide exceent, expert customer care, whether it s routine servicing or something more urgent. Amost 1 out of every 2 backhoe oaders sod in the word is a JCB s 1950 s 1960 s 1970 s 22 Joseph Cyri Bamford buids his first twowheeed tipping traier using a war-surpus Jeep axe and whees in this rented garage in the United Kingdom. JCB continues to expand its product ine and moves its factory to arger quarters. By inventing the first backhoe oader, JCB revoutionizes the construction industry by giving contractors access to simpe, powerfu earthmovers. JCB expands its factory, virtuay doubing production capabiities. The company aunches the forerunner of today s Jet Visit Program, acquiring an airpane and fying in customers for factory tours. As demand for JCB products soars, the company exports its machines to Germany, Hoand, Itay, Spain and Canada. JCB s Loada Teescopic Hander revoutionizes the buiding industry by enabing bricks to be ifted on paets.

23 A FEW WORDS ABOUT JCB Buit in 2000, the JCB North American Headquarters in Savannah, Georgia supports a United States and Canadian deaers and manufactures the word s safest skid steer and compact tracked oader. JCB in North America JCB has been in North America for over 40 years, but made a huge commitment to the market in 2000, when the North American business and manufacturing center was buit in Savannah, Georgia. From this 500,000 square foot faciity, JCB supports over 120 deaers in the United States and Canada, providing parts, training and expertise. The Savannah manufacturing foor produces the word s safest skid steer and compact tracked oader. From Savannah, we are aso proud to manufacture the High Mobiity Engineer Excavator (HMEE), a high-speed fuy armored backhoe oader currenty in use by the U.S. Army. To find out more about the fu range of JCB construction equipment, and to find the deaer nearest you, pease visit Buit in Savannah, the fuy armored JCB High Mobiity Engineer Excavator (HMEE) is the word s toughest backhoe. 2 YEAR WARRANTY Manufacturing Faciities Parts Distribution Centers Deaers Protection comes standard n Industry best standard 2-year warranty n Incudes 3-year structura warranty n Fu JCB machine range covered n First year warranty covers unimited hours, second year covers up to 2000 hours JCB is committed to the best aftersaes support in the industry. The 2 year standard warranty can be serviced by any authorized JCB deaership and is transferabe during the standard 2 year period s 1990 s 2000 s Tomorrow JCB expands its product range to wheeed and tracked excavators. The company deveops the first and sti the ony true, high-speed tractor, the Fastrac. JCB aunches its teescopic hander in the U.S. The revoutionary monoboom skid steer is introduced to the compact range of equipment, quicky heraded as the safest skid steer on the market because of it s unique side-door entry. JCB buids it s North American headquarters near Savannah. The JCB Diesemax engine breaks the and speed record. The company begins manufacturing its own diese engines. The U.S. Army contracts 800 HMEES, to be buit in Savannah. JCB s commitment to be Never Content wi remain. We wi continue to deveop innovative machines that wi better hep our customers get the job done. Our famiy of deaers wi continue to grow, insuring you the word-cass service and support no matter where you operate your JCB. 23

24 ONE COMPANY, OVER 300 MACHINES. Your nearest JCB Deaer JCB North American - Headquarters Savannah Bamford Bvd., Savannah, Georgia, Te: (912) Downoad the very atest information on this product range at JCB inc. A rights reserved. No part of this pubication may be reproduced, stored in a retrieva system, or transmitted in any form or by any other means, eectronic, mechanica, photocopying or otherwise, without prior permission from JCB inc. A references in this pubication to operating weights, sizes, capacities and other performance measurements are provided for guidance ony and may vary dependant upon the exact specification of machine. They shoud not therefore be reied upon in reation to suitabiity for a particuar appication. Guidance and advice shoud aways be sought from your JCB Deaer. JCB reserves the right to change specifications without notice. Iustrations and specifications shown may incude optiona equipment and accessories. The JCB ogo is a registered trademark of J C Bamford Excavators Ltd. DWUSA /14 /JCB /JCBNA /JCBNORTHAMERICA