SP Stationary concrete pump. Concrete output max. 113 m³/h Concrete output max. 162 bar. 18,300-19,400 lb

Transcription

1 SP 38 Stationary pump Concrete output max. 113 m³/h Concrete output max. bar Concrete output - 24 kw Machine weight 8,3-8,8 kg 18,3-19,4 b

2 The SP 38 from SCHWING Performance and reiabiity SP 38 Stationary pump With a output of up to 113 m³ / h and a pressure on of up to bar, the SP 38 from SCHWING is the reiabe and safe soution for pumping in medium and arge construction projects. The standard dua-circuit hydrauic system ensures smooth pumping, fast shift-over and high pump performance combined with exceent energy ef ciency. Like a SCHWING pumps, the SP 38 offers short maintenance times, an unrivaed ow wear and a high product quaity. For higher machine avaiabiity and more reiabiity for every pour. Low-wear vave The egendary ow wearing ROCK vave guarantees extremey ong operating times and very ow service costs. The optimum geometry of the ROCK reduces the friction of the fow. Its robustness aso aows the pumping of demanding mixtures ike with ow water-cement ratio. The optiona SmartSwitch function aows switching from maximum deivery rate (rodside) to maximum pump pressure (pistonside) at the touch of a button and without a the messy exchanging of hoses: quick, easy and secure. SP 38 D Stage IV/Tier 4f Stationary pump The generousy dimensioned cooing system provides optimum operationa safety and ensures, with its hydrostaticay driven ventiator and the arge-voume hydrauic tank, maximum pump power even at high temperatures. Short service times More productivity with optimum maintenance accessibiity: the maintenance faps of the SP 38 can be unocked and opened with ony one hand. A maintenance points are easiy accessibe and the serviceabe components are convenienty and ergonomicay arranged. The tank nozzes attached to both sides guarantee that the SP 38 D can be quicky refueed on any jobsite. The EcoCean procedure aows the pacement of a inside the pipeine for high-rise pumping. This reduces the amount of needed as we as disposa costs, increasing the efficiency of the pour. A SCHWING stationary pumps are equipped ready for the EcoCean procedure ex-factory. Increased operating comfort The cear operating structure and arge-format coour dispay of the machine contro aow for easy and intuitive operation of the SP 38. Machine data, operating modes and seected settings can be retrieved quicky and various parameters can be changed. The integrated diagnosis system supports safe operation and aerts the operator to the maintenance intervas. High-performance hydrauic system The open dua-circuit hydrauic system of the SP 38 converts the high drive power into high pumping power efficienty and with ow oss. The 7 itre hydrauic tank provides a ong oi service ife and a high heat dissipation capacity. As such, even in the case of extreme ambient temperatures, a constanty high pumping power is guaranteed. Motors for every need The SP 38 has various drives which combine maximum pump output with high efficiency: Diese engine in the IIIA/Tier 3 exhaust emission category Diese engine in the IV/Tier 4f exhaust emission category with diese particuate fiter and SCR system Emission-free eectric motor of efficiency cass IE 3

3 SP 38 Stationary pump SP 38 Stationary pump The ROCK Options Faster cean with ess water. Outet options Water pump Due to its straight design, in comparison to other vaves, the ROCK vave is easier and quicker to cean. It aso provides a direct view into the deivery cyinder and of the pumping pistons. The pump kit can therefore be ceaned easiy and convenienty within just two strokes. This saves water and reduces the time needed for ceaning. Scraping out the residua DN DN 125 DN 15 DN 15 DN 15 DN 15 Rockschieber Optimum geometry for ow-friction concret ow. The smaer the fow is diverted in the vave, the ower the pressure oss and wear at this point. And that is precisey the case with the ROCK vave: its optimum geometry ensures a straight and thus extremey ow-friction fow out of the deivery cyinder into the outet. This reduces wear in the vave and minimises the energy required for the drive. It aso ensures the owest maintenance and operating costs. For the connection of the pipeine chosen for the project (DN, DN 125 or DN 15) to the outet of the SP 38 (DN 15), suitabe output tions are avaiabe. Hydrauic contro unit Once the concreting work is finished, the water pump faciitates ceaning of the SP 38 with up to 8 /min and up to bar of water pressure. Hydrauic outriggers fow defection fow defection ROCK vave other vave Inteigent wear protection. The wear in the vave is particuary high as the is fed into the outet at high pressure. In order to minimize this wear, at the most heaviy oaded point of the ROCK does not rub on stee, but rather on. This is because the inteigent design of the ROCK eads to the formation of a triange after each shift. Protected by this ayer, the ROCK has a significanty onger service ife than other vaves. For noticeaby more profit per m³. Protection of the ROCK inside by triange Protection of the ROCK inside by triange Components, such as a shut f vave, can be easiy operated by the SP 38 (with up to 21 bar and up to 3 /min) via the hydrauic contro unit. With the hydrauic outriggers, the SP 38 can be jacked up easiy and safey. For an exact aignment of the pump the outrigger egs can be controed individuay. More options Foodight SmartSwitch Kompressor Concrete vibrator on the grid Radio remote contro Centra ubrication system Standard equipment Dua-circuit hydrauic system Four attachment points at the top Doube pressure accumuator Cabe remote contro with 3 m cabe Hydrostaticay driven fan Emergency-off button at the hopper and water box Fue tank with doube-sided tank nozzes Batteries 2 x 12 v, each with 143 Ah Chromed deivery cyinders Supporting eg, two-stage Cabe remote contro with 3 m cabe Pressure gauge for hydrauic pressure and for accumuated charge pressure Cabe remote contro with 3 m cabe Carbide wearing parts

4 SP 38 Stationary pump SP 38 Stationary pump Technica data Designation SP 38 D Stage IIIA/Tier 3 SP 38 D Stage IV/Tier 4f Designation SP 38 E (5 Hz) SP 38 E ( Hz) Weight kg 8,3 8,8 Weight kg 8,5 8,5 Length (L) 7,27 7,27 Length (L) 7,27 7,27 Height (H) 2,8 2,7 Height (H) 2,4 2,4 Width (B) 2,18 2,18 Width (B) 2,18 2,18 Width (C) 2,7 2,7 Width (C) 2,7 2,7 Height (G) 2,15 2,15 Height (G) 2,15 2,15 Performance Performance Pump kit P Pump kit P P Deivery cyinders x 2, x 2, Deivery cyinders x 2, Concrete output max. m³/h 66 Concrete output max. m³/h Pressure on max. bar 12 Pressure on max. bar Stroke rate max. 1/min Stroke rate max. 1/min Concrete vave Concrete vave Hydrauic system open system, dua-circuit hydrauics Design 7 Hydrauic tank Motors open system, dua-circuit hydrauics Diese CAT C7.1 Diese CAT C7.1 Engine type 5 5 Engine power Emission standard Stage IIIA/Tier 3 Stage IV/Tier 4f Frequenz Emission contro system - DPF + SCR Efficiency cass 4 4 Fue tank 7 Motors Engine type Engine power Hydrauic system Design Hydrauic tank kw Eectric motor Eectric motor kw 24 Hz 5 IE3 IE3 DPF: Diese particuate fiter; SCR: seective cataytic reduction Performance specifications are maximum theoretica vaues. C SP 38 D Stage IIIA/Tier 3 H Bid ersetzen! fow [m³/h] L pressure [bar] B SP 38 E (5 Hz) 18 pressure [bar] pressure [bar] G SP 38 D Stage IV/Tier 4f fow [m³/h] fow [m³/h]

5 SCHWING stationary pumps. Performance and safety at a eves. SCHWING GmbH Heerstrasse Herne, Germany Phone Fax info@schwing.de Stetter GmbH Dr.-Kar-Lenz-Strasse Meingen, Germany Phone Fax info@stetter.de Subject to technica and dimensiona modifications. Iustrations are non-binding. The exact standard specification, the scope of deivery and the technica data are detaied in the offer.