RX10. 5-axis machining center a system developed for high performance. Machine tool manufacturer
|
|
- Lydia Caldwell
- 6 years ago
- Views:
Transcription
1 e RX10 5-axis machining center a system deveoped for high performance Machine too manufacturer
2 Minima mass to set in motion The compete machine design has been constructed on the principe of minimising the moving parts, maximising the static mass and guarantees a unique stabiity.
3 3 2 1 Machine coumn and machine bed made of minera casting 2 Linear roer guide ways 3 Direct measuring system (gass scaes) 4 Rotary tabe support 5 Ba screws 6 Feed motors 7 Strongy ribbed cross side RIGID construction The machine bed and machine coumn are made of minera casting and form a massive unity with enormous rigidity and exceent vibration absorbing properties. Therma and mechanica inherent stabiity are guaranteed with this type of construction, even at extreme oads. Dynamic properties Therma properties Ampitude Temperature Minera casting Cast iron Environment temperature -2-3 Cast iron Minera casting s s Time Time Time 2 3
4 The miing head sim, compact and rigid Its compact and sim design guarantees optimum accessibiity to the work piece to be machined. The drive is a backash-free worm drive and can thus counteract high machining forces.
5 No imits on universaity The proven pivoting head design guarantees a high universaity for muti-sided machining and is designed for simutaneous miing operations with up to 5 axes. This key technoogy has been used successfuy at Reiden Technik AG for years in different ranges of machinery. Cear work space Even with the miing head pivoted the operator aways has an optima view of the too and work piece. Work pieces of up to ø mm can be turned in the whoe work space. For machines with an automatic paet changer, the swing diameter is imited in the zone oft he paet changer. Vertica miing head position In the vertica miing head position the front fattened tabe edge can be driven up to and up to 300 mm behind the fattened tabe edge. Horizonta miing head position In the horizonta spinde position the spinde center can be driven up to 10 mm beow the edge of the tabe. Work pieces are camped directy to the tabe and do not ose any stabiity by construction using fixtures. A axis, continuous programmabe The A axis rotates continuous from -1 up to 90. The NC axis is designed for positioning and simutaneous operations. 4 5
6 Standard motor spinde DDT Doube Drive Technoogy High-Speed + High-Torque min -1 max. 135 Nm min min -1 max. 83 Nm max. 291 Nm Performance diagram Torque diagram Power [kw] Torque [Nm] HT => HS 14 7 HT => HS '000 3'000 5'000 10'000 16'000 Speed [min -1 ] 1'000 3'000 5'000 10'000 16'000 Speed [min -1 ] High Torque DDT 291 Nm 40% ED (27 kw) High Torque DDT 226 Nm 100% ED (21 kw) High Speed DDT 83 Nm 40% ED (28 kw) High Speed DDT 63 Nm 100% ED (28 kw) High Speed 135 Nm 40% ED (38 kw) High Speed 105 Nm 100% ED (38 kw) Increased machine precision via detecting spinde expansion at source. By integrating a spinde dispacement sensor at the expansion source, this can be measured accuratey and compensated eectronicay. The effective expansion of the spinde is transmitted in sync to the contros and compensated by appying a temperature compensation formua. The ongitudina expansion of swiveed panes is aso compensated corresponding to the aignment of the miing head.
7 DDT Doube Drive Technoogy Unique and patented As standard the RX10 is deivered with a motor spinde version of min -1 and a maximum torque of 135 Nm. The Doube Drive design patented by Reiden Technik AG is avaiabe as an option. With this version a maximum torque of 291 Nm is reached via the High Torque Motor at up to min -1. From min -1 the High-Torque- Motor is decouped and a maximum number of revoutions of min -1 reached via the buit in motor spinde in the head. Movement diagrams Rotary tabe ø 800 Rotary tabe ø 1' Spinde center = 10 mm under the edge of the tabe max. turning diameter on the rotary tabe by cosed doors = ø 1'350 Rotary tabe ø 800 Rotary tabe ø 1' max. turning diameter on the rotary tabe by cosed doors = ø 1'350 Horizonta Vertica Unique universaity Usabe as a horizonta machining center: thanks to the distance of up to 350 mm from the rear tabe edge to the spinde nose even arge work pieces can be machined with ong toos. Usabe as a vertica machining center: in the vertica spinde position the compete tabe surface can be traversed. 6 7
8 Additiona stabiity The HSK100 variant of the miing head aso masters high machining forces with fying coours. Two speed variants and pneumatic spinde camping ensure best possibe set-up, even in miing-turning mode.
9 Penty of room for individuaity Star-shaped T-sots and factory readying for jaw boxes provide the best possibe setup for camping circuar components. The tabe surface can however be taiored to customer requirements. MILLING AND TURNING in one setup The direct-drive circuar tabe has automatic imbaance detection. Counterweights ensure ow-vibration machining even at a maximum speed of 400 min -1. Workpieces need no onger be converted between miing and turning operations. Performance diagram Spinde and min -1 Torque diagram Spinde and min Power [kw] Torque [Nm] '000 2'000 3'000 4'000 5'000 6'000 8'000 Speed [min -1 ] 1'000 2'000 3'000 4'000 5'000 6'000 8'000 Speed [min -1 ] High Torque min Nm 40% ED (29 kw) High Torque min Nm 100% ED (29 kw) High Torque min Nm 40% ED (29 kw) High Torque min Nm 100% ED (29 kw) 8 9
10 Loading methods Two different oading methods can be used to pass toos to the magazine. On the HSK63 / SK40 it is a singe too drawer and on the HSK100 / SK50 a swing door for five toos that can be oaded together.
11 HSK100 / SK50 Too magazine HSK63 / SK40 Too magazine Too changer The shef magazine is arranged to the side of the atera work space. The too is prepared via 2 independent NC axes and exchanged using a dua too gripper. HSK63 / SK40: 73 / 173 / 273 paces HSK100 / SK50: 95 / 127 / 147 / 191 paces too handing Quick, reiabe and convenient On the rear of the machine, toos can be oaded and unoaded quicky in parae with ive operation. A touch pane increases ease of use for users and assists them in managing toos. The controer uses the too types to determine itsef vacant spaces and inhibits neighbouring spaces when arge toos are used. A chip system is avaiabe as an option that automaticay passes too information to the controer
12 Good view and accessibiity The optima arrangement of the contros, good ighting and arge windows aow the operator the best possibe view of the too and work piece. The CNC controers used, from HEIDENHAIN and SIEMENS, are amongst the best in the word.
13 Too charging station Window Maintenance / oi Eectrica cabinet Charging station Operation Cear working environment Ergonomicay coordinated on the operator Best accessibiity The obique arrangement of the chip conveyor resuts in optima access to the machine tabe. During set up work there is minimum weight on the back and hinges. The incomparabe view into the machine aows optimum monitoring of the machining process. Right back in the design stage the concerns and experiences of machine operators have been taken into account. This resuts in ergonomics which paces the operator in the foreground as a centra eement of the machine. Door opening mm Work piece oading, sma The rapid access with the right machine door aows on the one hand the rapid exchange of sma, ight work pieces and on the other aows toos to be quicky checked for wear. Work piece oading, arge The door can be opened up to mm when oading or unoading with the hoisting crane and thus aows maximum accessibiity
14 Linear roer guide ways Each inear axis is equipped with four roer shoes. These are connected to the automatic ubrication system and are maintenance-free.
15 Axis drives The axis drive motors are directy inked to the ba screw. The inine design aows direct power transfer and maximum performance. The Z axis is driven with a doube-spinde drive (master-save drive). Direct measuring systems The Heidenhahn direct measuring system in the inear and rotary axes, which are connected as standard to the seaing air, guarantee the highest machine precision for years. Tabe support High mechanica basic accuracy is the basis for the precision formed on the machined work piece. Therefore the tabe support is handscraped to the other basic components on the entire surface. Precision is produced if the quaity is right Anyone wanting to produce precise work pieces must be abe to rey on the machine. What our customers require of us is what we require of our suppiers. We guarantee that ony the highest quaity components are used in a our machines
16 Paet base tabe The paet tabe is camped to the paet base tabe via four zero point camping systems. A repeat accuracy of 0.01 mm is ensured at a times.
17 REIDEN RX10 PCS (Paet Changing System) Paet size mm Max. transfer weight kg / 800 Number of paets 2 / 5 optiona up to inear storage unit * At 5-fod paet changing system Moduar automation design in a sma space Camping and setup during running time. Thanks to the ingenious automation design nonproductive time can be reduced to a minimum. The RX10 can be expanded to various eves up to a inear storage unit. User friendiness and access are not affected in the process
18 The Reiden RX10 is equipped even in the basic mode with innovative technoogy for commercia compete machining. Basic features Additiona features Contro and operation: Contro Heidenhain TNC640 Siemens 840D s Portabe eectronic hand whee 2 sets of operating and programming instructions (inc. wiring diagram) Drive and spinde Spinde speed range min -1 (135 Nm) DDT min -1 (291 Nm) Spinde taper HSK63 SK40 / HSK100 / SK50* Automatic pivoting head horizonta / vertica Miing head cooing system Airshied system in miing head C axis 360 (continuous) A axis -1 to 90 (continuous) Minima quantity ubrication system Work space and traveing distances Fu space protection casing Machine interior ighting 2 anged doors for oading by crane Minera gass windows Rotary tabe ø / ø Peripheras Too changer, paces (HSK63 / SK40) 73 (shef magazine) 173 / 273 (shef magazine) Too changer, paces (HSK100 / SK50) 95 (chain magazine) 127 / 147 / 191 (shef magazine) Chip conveyor, front, engthwise aong machine bed Rinsing jet with separate cooant pump Interna cooant suppy, form A 30 bar 50 / 80 bar Pressure reguation of interna cooant suppy Cooant recooing Paper band fiter Endess band fiter Rotating inspection gass Smoke and cooant mist extractor Touch probe (radio) Laser too setting and monitoring Paet exchange system 2-/ 5-way Coouring Light grey RAL7035 / Vioet bue RAL5000 upon request * With HSK100 and SK50 is the spinde speed / min -1
19 Features / Specifications Specifications Cutting area X axis (ongitudina axis) mm Y axis (transverse axis) mm Z axis (vertica axis) mm 810 Rotary tabe versions ø / Max. swing diameter mm (1 050)** Max. tabe oad kg Main drive Spinde power min -1 kw 38 kw at 100% duty ratio / 38 kw at 40% duty ratio Spinde power DDT min -1 * kw 21 kw at 100% duty ratio / 27 kw at 40% duty ratio Spinde power DDT min -1 * kw 28 kw at 100% duty ratio / 28 kw at 40% duty ratio Spinde power min -1 * kw 29 kw at 100% duty ratio / 37 kw at 40% duty ratio Spinde power min -1 * kw 29 kw at 100% duty ratio / 37 kw at 40% duty ratio Max spinde torque min -1 Nm 135 Max spinde torque DDT min -1 * Nm 291 Max spinde torque DDT min -1 * Nm 83 Max spinde torque min -1 * Nm 291 Max spinde torque min -1 * Nm 227 Feed motor Rapid feed X-/ Y-/ Z axis m / min 60 Too changer Max. too ength mm 400 (365 at SK50) Max. too diameter mm 80 / 160 (125 / 250 at SK50 and HSK100) Machine specifications Machine weight kg * Optiona, subject to technica aterations. ** for paetisation Guaranteed accuracies DIN VDI / DGQ 3441 Accuracy depends heaviy on externa therma infuences. The vaues given are reached in the temperature region of 20 +/- 2 during factory approva. Linear axes X, Y, Z Position error P 5 µm Position deviation Pa 3 µm Repeatabiity Ps mit 3 µm Repeatabiity Ps max 4 µm Reversa error Ps mit 1 µm Reversa error U max 2 µm Rotary tabe C axis Positioning error P Position deviation Pa Repeatabiity Ps mit Repeatabiity Ps max Reversa error U mit Reversa error U max Axia runout, rotary tabe Concentric run-out, aignment 5 ws 2 ws 2 ws 3 ws 2 ws 2 ws 0.01 mm mm 18 19
20 V6 RX10 dimensions REIDEN RX10 HSK63 / SK ø 1000 REIDEN RX10 HSK100 / SK ø Base Schaffhausen Aarau Zürich St. Gaen Reiden Neuchâte Bern Luzern Chur Reiden Technik AG Machine too manufacturer Werkstrasse 2 CH-6260 Reiden Te. +41 (0) Fax +41 (0) info@reiden.com Genève Lausanne Sion Lugano
RX10. 5-axis machining center a system developed for high performance. Machine tool manufacturer
e RX10 5-axis machining center a system deveoped for high performance Machine too manufacturer 3 2 1 Machine coumn and machine bed made of minera casting 2 Linear roer guide ways 3 Direct measuring system
More informationC 60. The new. Giant. milling at its best
C 60 The new Giant. miing at its best The C 60 U at home in a fieds Too and moud making Highy dynamic simutaneous 5-axes machining up to a component weight of 2,500 kg Aerospace Precision in perfection
More informationAVOLA KREISSÄGEN. Revolving Cross Cut Saw GAMA 65 K. Technical Equipment. Options
AVOLA Revoving Cross Cut Saw GAMA 65 K Technica Equipment Motor rating 8,1 kw/400 Vac-50 Hz, star / deta start sawbade mounted direct on motor shaft Motor speed 3.000 rpm / sawbade speed 3.000 rpm Sawbade
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationC 50. The Powerful. milling at its best
C 50 The Powerfu miing at its best C 50 5-axes / 5-sided machining up to 2,000 kg The C 50 U at home in a fieds Too and moud making Highy dynamic simutaneous 5-axes machining up to a component weight of
More informationDrill - Mill. Tilting Head MH 50V 3ph MH 50G 3ph Features. Can change tool in seconds! Optional Accessories.
MH 50V 3ph 0333-8185 MH 50G 3ph 0333-8180 Heavy, sturdy & soid coumns made of premium cast materia with ground and shaven dovetai guide for exceent stabiity and precision Cockwise/Anti-cockwise rotation
More informationCNC INTERNAL GRINDERS
CNC INTERNAL GRINDERS IG 50 IG 150 IG 150 U WHO WE ARE Estabished in 1973, Micromatic Grinding Technoogies Ltd (MGT ) have been manufacturing a wide range of Externa, Interna, Universa and Specia Purpose
More informationC 30. The Dynamic. milling at its best
C 30 The Dynamic miing at its best C 30 Unbeatabe in 5-axes / 5-sided machining The C 30 U at home in a fieds Too and moud making Highy dynamic simutaneous 5- axes machining up to a component weight of
More informationIndustry. SNR, your guide to linear modules
Industry SNR, your guide to inear modues SNR A bearing manufacturer known across the word For amost a century SNR has been focusing on the deveopment, design and manufacture of bearings. Today SNR has
More informationMAXXMILL Vertical milling center for 5-sided machining MILLING
MAXXMILL 400 630 750 Vertical milling center for 5-sided machining MILLING EMCO-WORLD.COM MAXXMILL 400 Compact vertic 1 MACHINE BED Machine bed and slide systems made of solid welded steel and cast iron
More informationReady for the future. ST 1082 mobile column lifts capacity kg
Ready for the future ST 1082 mobie coumn ifts capacity 8.200 kg Two hard and fast aws appy in today s maintenance and repair faciities: time is money and an agreement is an agreement. This is why more
More informationLOGIFLEX LF MINI / ELF. Logiflex - flexible handling of goods
LOGIFLEX LF MINI / ELF Logifex - fexibe handing of goods High fexibiity and efficiency - with ony one truck, goods can be transported, ifted and handed in many different ways. The design puts focus on
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationTECHNICAL DATA AND INFORMATION. 114 kw/152 hp t. up to 12 m SCRAP RECYCLING MACHINE MHL335
TECHNICAL DATA AND INFORMATION 114 kw/152 hp 23.5-25 t up to 12 m MHL335 SCRAP RECYCLING MACHINE TECHNICAL DATA MHL335 OPERATING WEIGHT 23.5-25t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 2012 L06
More informationMarCator 1087 R ABS. Just set once to zero. Battery service life is 3 years. Error free operation
- -6 MarCator 1087 R The new Digita Indicator MarCator 1087 R. The muti-functiona Digita Indicator with a combined anaog and digita dispay as we as toerance and dynamic measuring functions. Dynamic measuring
More informationTECHNICAL DATA AND INFORMATION. 366 hp. 145, ,710 lbs. up to 68.9 ft SCRAP-HANDLING AND PORT MACHINE MHL380D
TECHNICAL DATA AND INFORMATION 366 hp 145,505-147,7 bs up to 68.9 ft MHL380D SCRAP-HANDLING AND PORT MACHINE TECHNICAL DATA MHL380 D OPERATING WEIGHT 145,505-147,7 bs DIESEL ENGINE MANUFACTURER AND MODEL
More informationMarCator 1087 ABS USB. No interface box is required! Simple and inexpensive way to set up a multiple measuring. Digimatic. evaluation instrument
- -46 MarCator 1087 The new Digita Indicator Marcator 1087. The muti-functiona Digita Indicator with a combined anaog and digita dispay; pus toerance and dynamic measuring functions. D y n a m i c m e
More informationConnected to you 2019
2019» Connected to you Fu body ength viny (white traiers ony). Larger main side doors on both sides. 02 03 Standard. Not avaiabe. NCO = no cost option. Change to front nose mouding Now a thin nose section
More informationeven better and more powerful!
CNC UNIVERSAL MACHINING CENTRE THE 3 rd GENERATION DMU even better and more powerful! DMGMORI.COM Applications and Parts Machine and Technology Control Technology Technical Data Compact universal machining
More informationMHL 335 MHL 335 MATERIAL HANDLER
MHL 335 MATERIAL HANDLER ENGINE WEIGHT REACH 153 HP (114 kw) 51,808-55,115 bs (23.5-25 t) 39.4' (12 m) 36' (11 m) 35' (10.7 m) High-performance 153 HP (114 kw) turbocharged diese engine (TIER III/COM III)
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationClamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
More informationThe giant amongst the giants.
BB9090 PLUS 02 BB9090 PLUS The giant amongst the giants. The argest mode of the New Hoand big baer range is the BB9090 PLUS. Its superior performance both in terms of perfect, firm, we-shaped baes as we
More informationBlanking tools for the automotive industry
anking toos for the automotive industry 1736 006 3 rt.-nr..400.03.0706.01000 07/006 17363 00 1 anking toos for the automotive industry Tabe of contents age age FIRO Tradition and Technoogy 6 7 0. 1.. 3.
More informationCNC universal machining centre DMU 50 DMU 50 The 3 rd generation DMU: even better and more powerful!
www.dmgmori.com CNC universal machining centre The 3 rd generation DMU: even better and more powerful! Applications and Parts Machine and Technology Control Technology Technical Data Compact universal
More informationFive-axis universal milling machine DMU 75 monoblock High tech as standard Five-axis simultaneous an excellent price.
www.dmgmoriseiki.com Five-axis universal milling machine DMU 75 monoblock High tech as standard Five-axis simultaneous machining at an excellent price. DMU 75 monoblock Top features for five-axis simultaneous
More informationTECHNICAL DATA AND INFORMATION. 128 kw/171 hp t. up to 13.7 m SCRAP RECYCLING MACHINE WITH QUICK CONNECT MHL340D MHL340DFQC
TECHNICAL DATA AND INFORMATION 8 kw/171 hp 27.5-1.2 t MHL4D MHL4DFQC SCRAP RECYCLING MACHINE WITH QUICK CONNECT up to 1.7 m TECHNICAL DATA MHL4D/MHL4DFQC OPERATING WEIGHT WITHOUT ATTACHMENTS 27.5-2 t MHL4
More informationAccurate Precision Machining R12/16/20 CNC VERTICAL LATHE ISO 9001
Accurate Precision Machining R12/16/20 CNC VERTICA ATHE ISO 9001 ABOUT RADAR Radar Industrial Co., td., established in 2007, has more than 50 years of experience in manufacturing professional machine tools
More informationComponents for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling
Engineered Materia Handing Components for Overhead Cranes Sta dard n Hoists Engineered Hoists Endtrucks Crane Kits Troey drive consists of singe speed squirre-cage gear motors. Integra disc brakes are
More informationGreat Productivity, Vertical Tapping Center
201201 UGINT Machine too Brochure Ver. 1 Engish Great Productivity, Vertica Tapping Center PT400S UT380 UT360D UT420 UM450 XT6000S http://www.ugint.co.kr 2 3 Technoogy NCMechanism Controer Energy Saving
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationToyoda Machinery Europe. horizontal machining centres
Toyoda Machinery Europe horizontal machining centres horizontal machining centres FH-J Series: FH400J FH500J FH-S Series: FH450S FH550S FH6S FH-SX Series: FH550SX FH6SX FH800SX FA-S Series: FA6S FA800S
More information--... Need a prototype tomorrow? Experts in customization, innovative design and engineering
. Hay!J.~!!., kerk " Experts in customization, innovative design and engineering Haydon Kerk Motion Soutions has the e
More informationLASER & LOW BODY Fan Coil Units 2 & 4 pipe system A complete range from 0.7 kw up to 9.5 kw
york air-conditioning products LASER & LOW BODY Fan Coi Units 2 & 4 pipe system A compete range from 0.7 kw up to 9.5 kw CSL00 (Buit in) CSR00 (Wa mounted) Fan speed seector CML00 (Buit in) CMR00 (Wa mounted)
More informationCentre Lathes CENTRE LATHES with CSS DRO as standard
www.cochester.co.uk Centre Lathes CENTRE LATHES with CSS DRO as standard Engineered for efficiency Cochester manua athes are renowned wordwide for quaity and reiabiity. Buit to withstand rugged, heavy
More informationHüller Hille NBH 5X 5-Axis Machining The New Benchmark for Complete Machining
Hüller Hille NBH 5X 5-Axis Machining The New Benchmark for Complete Machining The economic 5-axis machining is found in all industrial areas today. With two different concepts NBH machining centers can
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationInnovation. Simplicity. is Simply Better. Rotary Lobe Pumps
Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured
More informationThe DUET Urban Double Deck Trailer
The DUET Urban Doube Deck Traier Designed for High-Efficiency Urban Deiveries Deivering 200% oad voume to city centres The DUET Urban Doube Deck Traier A high-cube urban freight soution, the DUET Urban
More informationManual Lathes. The world turns on Colchester lathes
Manua Lathes With CSS DRO as Standard The word turns on Cochester athes Engineered for efficiency Cochester manua athes are renowned wordwide for quaity and reiabiity. Buit to withstand rugged, heavy
More information1B20 1B30 1B40. The engineering result of careful market research: Small, light, powerful and universally applicable kw HP.
The engineering resut of carefu market research: Sma, ight, powerfu and universay appicabe Te: 0 85 3 / 39-0 Fax: 3 94 8 http://www.hatz-diese.de emai: marketing@hatz-diese.de.4-7.7 kw.8-0.5 HP 5 / 629
More informationLASER & LOW BODY Fan Coil Units
LASER & LOW BODY Fan Coi Units 2 & 4 pipe system A compete range from 0.6 kw up to 9.7 kw TUC03 Termina unit controer BacNET and N2 Metasys network compatibe CSL00 (Buit in) CSR00 (Wa mounted) Fan speed
More informationPRELIMINARY TECHNICAL DATA AND INFORMATION. 85 kw/114 hp t. up to 10.4 m RECYCLING MACHINE MHL320D
TECHNICAL DATA AND INFORMATION PRELIMINARY 85 kw/114 hp 17.8-1. t up to 1.4 m MHL2D RECYCLING MACHINE TECHNICAL DATA MHL2 D OPERATING WEIGHT 17.8-1. t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 212
More informationSP Stationary concrete pump. Concrete output max. 113 m³/h Concrete output max. 162 bar. 18,300-19,400 lb
SP 38 Stationary pump Concrete output max. 113 m³/h Concrete output max. bar Concrete output - 24 kw Machine weight 8,3-8,8 kg 18,3-19,4 b The SP 38 from SCHWING Performance and reiabiity SP 38 Stationary
More informationUSER INSTRUCTIONS USER INSTRUCTIONS. Innovative Car Alarm. Thatcham M.I.R.R.C. Evaluation No: TC2-1065/0199
USER INSTRUCTIONS USER INSTRUCTIONS Innovative Car Aarm Thatcham M.I.R.R.C. Evauation No: TC2-1065/0199 IMPORTANT WARNING The Cobra 7928/26/HF Aarm Immobiiser is a Category 1 MIRRC Thatcham isted security
More informationU1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE
U1000 U1000 SUPER CNC BED TYPE MILLING MACHINE RT1000 CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 CNC Bed Type Milling Machine Machine Specification U1000 Surface 2500 / 3100 / 3600 900(1050)mm
More informationwww.motiontech.com.au Precision Linear Motion Products Cataog and Design Guide How to Use This Guide Haydon Kerk Motion Soutions, Inc. speciaizes in customized designs to sove compex engineering probems
More informationFAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer.
EMCO FAMUP CNC machining centers Vertical milling centers FAMUP MC-Line/MCX-Line With integrated pallet changer FAMUP MCP-Line Vertical milling machines FAMUP MMV-Line EMCO, the industrial systems supplier
More informationLINEAR MOTION CATALOG AND DESIGN GUIDE
WWW.HAYDONKERK.COM LINEAR MOTION CATALOG AND DESIGN GUIDE Providing the technica experience, products, and custom soutions to chaenging motion contro probems Haydon Kerk Motion Soutions is an innovative
More informationCopyright EXTRON All rights reserved E-EH-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationKudos TM. From Volkswagen and Cab Direct
Kudos TM from Vokswagen and Cab Direct KUDOS TM From Vokswagen and Cab Direct 04. Comfort and Driveabiity 05. Accessibiity and Space 06. Technica Specification 06. Coour Choice 07. Features and Options
More informationLintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting
Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series
More informationEC Series GMS200C. Generator Set Specification. Your Partner for Power. Page of 5
EC Series Generator Set Specification Your Partner for Power Page - 1 - of 5 3-Phase, 50Hz@1500RPM Prime Power Standby Power Votage kw kva Amps 380 160 200 303.9 400 160 200 288.7 415 160 200 278.2 440
More informationUniversal basic turning centres for a broad range of manufacturing CLX series CLX 350 CLX 450
www.dmgmori.com CLX 350 CLX 450 Universal basic turning centres for a broad range of manufacturing Machine highlights Modularity Ì Technology and applications Ì Customization and solutions Ì Control technology
More informationE[M]CONOMy. means: Not just training: Real action! CONCEPT MILL 260. CNC training with industrial performance
[ E[M]CONOMy ] means: Not just training: Real action! CONCEPT MILL 260 CNC training with industrial performance Concept MILL 260 The new Concept Mill 260 combines all benefits of the proven CM 250 with
More informationVN plus semi-mounted ploughs Perfect performance brings you success. Further VN-program:
GB Further VN-program: VN pus semi-mounted poughs Perfect performance brings you success VN TerraMix/TerraFex universa cutivator 2-/3-beam VN TerraCut muching cutivator 4-beam VN TerraDisc compact-disc
More informationSimultaneous 5-axis vertical machining centres FLEXI
FLEXI An innovative project at the top of technology. New FLEXI vertical machining centres, with movable worktable and 5 simultaneous axes, have an universal field of application and they are conceived
More informationManifold Technology.
----------------------------------------------------- 2017.2 Manifod Technoogy. made in Germany I Epkg. unitrything UNDER CONTROL. Manifod Technoogy - I BEULCO heating and cooing manifods made of high-quaity
More informationHigh Speed 5-Axis Mill-Turn Machining Center
MT4U SERIES CONTENTS MT4U series 1-2 MT4U series 3-4 Spindle system 5 Application sample 6 Expanded tool management 7 Two axes table (4/5 axis) 8 ATC system 9-1 Easy operation 11-12 Coolant system & Chip
More informationYour profit UMILL 1500 / Gantry-type milling machines for 5-axis machining MILLING EMCO-WORLD.COM
Your profit UMILL 1500 / 1800 Gantry-type milling machines for 5-axis machining MILLING EMCO-WORLD.COM Umill for 5-Ax 1 COMPACT DESIGN Maximum precision with top dynamics thanks to extraordinarily stable
More informationFlat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
More informationUNIC UNIC. (10.0t x 3.0m) SPIDER MINI CRANES SA RADIO REMOTE CONTROL WITH FEEDBACK DISPLAY
(.0t x 3.0m) URW-06 06 Tota width 2.0m Max Boom Length 23.m Max working radius 2.9m (.3m with fy jib) Max working height 22.8m (30.7m with fy jib) Diese powered and optiona integrated mains eectric Zero
More informationAluminium Fixed Blade Return Grilles Series
Auminium Fixed Bade Return Gries 4900 Series Auminium Fixed Bade Return Gries Modes 5145H and 51FH Return Gries have fixed horizonta bades (parae to width/first specified dim.) spaced on 19mm centres with
More information[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer
[ E[M]CONOMY] means: Standing up to any challenge. FAMUP MC and MCP Vertical CNC machining centers with and without pallet changer MC 120-60 and MC 75-50 The EMCO FAMUP MC series. One of the most advanced
More informationDisplacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2
Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................
More informationMHL 340D MHL 340D MATERIAL HANDLER
MHL 340D MATERIAL HANDLER ENGINE 171 HP (128 kw) WEIGHT REACHES 60,627-63,934 bs (27.5 t - 29 t ) 41.4 (12.6 m) 45 (13.7 m) RECYCLING MACHINE MHL 340D High performance 171 hp (128 kw) Deutz turbocharged
More informationSeries. High performances Vertical machining centre. Performance Technology Power Accuracy
Series High performances Vertical machining centre Performance Technology Power Accuracy Series Powerful, Rapid, Accurate High Performance Vertical Machining Centre The VX range of vertical machining centres
More informationDisplacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1
Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationUltimate Comfort SMART
NEW! Utimate Comfort SMART 1 Utimate Comfort SMART Comfort and quaity The patient chair is synchronized and is eectric driven. An ergonomic chair hight guarantees easy access. The water unit has a sef-contained
More informationTSP 6500/7000 SERIES. Specifications Turret Trucks
C TSP 6500/7000 SERIES Turret Trucks C TSP 6500 / 7000 Series Turret Trucks Minimum Cear Aise Running Cearance Non-Teescopic Forks Load Length + 205 + Fork Carriage Offset + Running Cearance + Running
More informationSpirit TM from Peugeot and Allied Fleet Driving for Perfection. Peugeot Spirit TM
Spirit TM from Peugeot and Aied Feet Driving for Perfection Peugeot Spirit TM 2 Fuy automatic interna ift Spacious rear compartment High quaity restraint system Passenger comfort Space and Fexibiity Avaiabe
More informationActros - Specifications
Pease note: Changes may have been made to the product since the brochure went to press (01.02.2014). The manufacturer reserves the right to make changes to the design, form, coour and specification of
More informationSwivel and visitor chairs quarterback
Swive and visitor chairs quarterback Generousy proportioned... Generousy proportioned and eegant the Sedus quarterback is an office swive chair which promises penty of space for productive we-being at
More informationHORIZ ONTAL MACHIN ING CENTERS NBH SERIES
HORIZ ONTAL MACHIN ING CENTERS NBH SERIES THE 3RD GENERATION NBH MACHINING CENTERS ADDED VALUE FROM OVER 40 YEARS NBH SERIES 4-AXIS MACHINING CENTERS NBH RUGGED, PRODUCTIVE AND MADE TO LAST With decades
More informationCopyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationGEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationLINEAR MOTOR SERIES 5-Axis Double column machine center
Focus High Speed & 5-axis LINEAR MOTOR SERIES 5-Axis Double column machine center KEN ICHI MACHINE CO., LTD LINEAR MOTOR SERIES 5-Axis Double column machine center Suitable for Automotive plastic mold
More informationMSeries. High Rigidity Vertical Machining Centers
MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationDisplacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 RPM GEAR PUMPS T3S
Dispacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 PM GEA PUMPS T3S Gear Pump Cataogue T3S TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationPOWER TRANSMISSION FLEXIBLE COUPLINGS ORPEX
POWER TRANSMISSION FLEXIBLE COUPLINGS 2 FLEXIBLE COUPLINGS Orpex copings are ses compensation copings everywhere where an absotey reiabe torqe transfer is reqired. Orpex copings cover with their types
More informationPiston pumps for eff icient wellpoint dewatering
Piston pumps for eff icient wepoint dewatering PT series P u m p s f o r r e s u t s Innovative eaders for the past 60 years BBA Pumps BV woudn t be a Dutch company if it didn t know how to dea with water!
More informationA Product of Hard Work SELECTOR GRABS
A Product of Hard Work SELECTOR GRABS ATTACHMENTS SELECTOR GRABS The perfect partner for your machine Simpe heavy duty design for maximum durabiity and reiabiity Buit in safety features to protect the
More informationGXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting
1 DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F- Gossary of terms... P.176~ guide... P.71~ Genera precautions... P.179~ PHOTO PHOTO IGHT FOW PARTICUAR
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More informationsolenoid dosing pumps
teknaevo soenoid dosing pumps innovation > technoogy > future The evoution of soenoid dosing pumps Cever Just Modes, Just PVDF, A functions in one pump modes that cover 1 to 60 t/h with an output pressure
More informationn Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
More informationSOLUTIONS FOR MOLD MANUFACTURERS
www.unisig.com SOLUTIONS FOR MOLD MANUFACTURERS DEEP HOLE DRILLING AND MACHINING CENTERS FULL RANGE OF DEEP HOLE DRILLING AND MILLING CENTERS MILLING, BTA, AND GUNDRILLING CAPABILITIES DESIGNED FOR MOLD
More informationThe 3rd Generation NBH Machining Centers Added Value from over 40 Years NBH Series
The 3rd Generation NBH Machining Centers Added Value from over 40 ears NBH Series NBH rugged, productive and made to last With decades of success, the NBH series has now been updated according to modular
More informationTechnology that k eeps you ahead
cap making systems EnD-o-mat CAP-o-mat MACHINES FOR STAMPING, FORMING AND LINING OF LUG CAPS Technoogy that k eeps you ahead Cap iner END-O-MAT cap iner Rotary cap iner for pastiso with maximized sector
More informationMB SERIES High Precision Horizontal Boring Mills
MACHINING CENTERS by MACHINING CENTERS by YAMA SEIKI USA, INC. 5788 Schaefer Ave., Chino, CA 91710 TEL : ( 909 ) 628-5568 ( 888 ) 976-6789 FAX : ( 909 ) 628-5556 Web : www.yamaseiki.com E-mail : info@yamaseiki.com
More informationEXTERNAL SCREEN CLASSIC SATINÉ 5500 COLLECTION INTELLIGENT FABRICS FOR SOLAR PROTECTION. Widths: Up to 320 cm
EXTERNAL SCREEN CLASSIC SATINÉ 5500 COLLECTION 2015 2018 INTELLIGENT FABRICS FOR SOLAR PROTECTION Widths: Up to 320 cm www.sunscreen-mermet.com CLASSIC SATINÉ 5500 THE WIDEST RANGE OF EXTERNAL SOLAR PROTECTION
More informationUX series. Value model UX300. Offer max. value for small parts up to Ø400 x 352 mm / 100 kg. Motor FANUC = F SIEMENS = S HEIDENHAIN = X / Y / Z (kw) F
UX SERIES UX series Value model UX300 Offer max. value for small parts up to Ø400 x 352 mm / 100 kg FANUC = F SIEMENS = S HEIDENHAIN = Motor T UX300 5 axes Spindle code 9B 12B 15C 18A 24A X / Y / Z (kw)
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationUniport CNC Portal Machining Centre with Pallet Changer.
Uniport 6 CNC Portal Machining Centre with Pallet Changer www.unisign.nl Uniport 6 UNISIGN The economical solution to flexible manufacturing! Since the introduction of the UNIPORT portal machining centres,
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationAWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationC2 BLUE, C4 BLUE A2 TRANSPORTER, A4 TRANSPORTER STANDARDS RAISED
» Connected to you C BLUE, C4 BLUE A TRANSPORTER, A4 TRANSPORTER STANDARDS RAISED UNITED KINGDOM 0 03 BLUE THE NEW NAME IN RACE & RALLY PADDOCKS The Bue traier range represents the essence of Brian James
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationPICOMAX 823/825. PICOMAX 823/825 VERSA Dynamics and Performance on Top Level. FEHLMANN: The Brand. Vertical Machining Centre in Portal Design
Vertical Machining Centre in Portal Design PICOMAX 823/825 VERSA Dynamics and Performance on Top Level. FEHLMANN: The Brand. PICOMAX 823/825 Precision «Made in Switzerland». At FEHLMANN, the customer will
More informationAny switch configuration
Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro
More information