Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections

Size: px

Start display at page:

Download "Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections"

Abner Banks
5 years ago
Views:

1 A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs Eastomer-Bars, -Sheets, -Sections FIBRO Chemica Tooing Aids Periphera Equipment Cam Units Standard Parts for Moud Making

2 C2 Lifting and Camping Devices

3 C3

4 Contents C C12 Die set shank, straight Screw-in ifter stud with cabe securing device C C13 Threaded die set shank DIN ISO Lifter stud VDI C C13 Die set shank with coar Lifter stud with cabe securing device, with weded disc C C14 Bot-on die set shank, ~DIN ISO Lifter stud with cabe securing device C C15 Couping spigot with thread Lifter stud C C16 Die set couping spigot Lifting eye bot, high tensie C C17 Spigot hoder Lifting eye bot, rotatabe C C18 Screw-in ifter stud VDI 3366 Hoisting snap ink, omnidirectiona C4

5 Contents C C28 Rotary safety eyebot, ight duty, with ba bearing Lifting fange with bot with safety ring, with feather key, to CNOMO Standard C C29 Rotary safety eyebot, heavy duty, with ba bearing Die ifting bot with safety ring, VDI C C30 Universa rotary safety eyebot with ova ring Die ifting bot with safety ring and spring, to VW standard C C31 Universa rotary safety eyebot for chain Die ifting bot with safety ring, CNOMO Standard C C32 Universa rotary safety eyebot with eye hook Bush for die ifting bot C C33 Ring bock with position ock Die ifting bot with safety ring, for ifting fange C C34 Lifting fange with bot with safety ring, to BMW Camp, forked shape, DIN 6315-B C C34 Lifting fange with bot with safety ring Camping caw, goose-neck shape C5

6 Contents C C39 Camping caw, infinitey variabe Set screw C C39 Camping caw, infinitey variabe Hexagon Nut DIN 6330 B C C40 Camp, straight, DIN 6314 Hexagon nut with coar, DIN C C40 Camp, straight, with setscrew Washer DIN C C41 Camp, goose neck shape, DIN 6316 Screw for T-sot, DIN C C42 Camp, goose neck shape, with setscrew Hexagon socket head cap screw, DIN EN ISO Strength cass C C43 Support, adjustabe Hexagon socket head cap screw, DIN EN ISO Strength cass C C44 Stepped Bock DIN 6318 Hexagon socket head cap screw, with ow profie head and key guide, DIN Strength cass 8.8 C6

30. C46 Hexagon socket countersunk head cap screw, ISO 10642 - Strength cass 8.

7 Contents C45 Socket head cap screw, with ow profie head, DIN Strength cass C46 Hexagon socket countersunk head cap screw, ISO Strength cass C47 Screw pug C48 Fat mushroom head screw with hexagon socket C50 Camping too set C51 Camping too set C7

Die set shank, straight Threaded die set shank DIN ISO 10242-1 211.11. d 1 h11 5 2 1 SW 3 d 3 211.11. Die set shank, straight Order No d 1 d 3 1 2 3 5 SW* 211.11.20.016 20 M16X1,5 40 3 18 58 17 211.

8 Die set shank, straight Threaded die set shank DIN ISO d 1 h SW 3 d Die set shank, straight Order No d 1 d SW* M16X1, M16X1, M20x1, M20x1, M24x1, M24x1, M30x M30x M42x *SW = width across fats d 1 f d 2 SW d Threaded die set shank DIN ISO Order No d 1 d 2 d SW* M16x1, M16x1, M20x1, M20x1, M24x1, M24x1, M27x M30x M30x M42x *SW = width across fats C8

Die set shank with coar Bot-on die set shank, ~DIN ISO 10242-2 211.13. d 1 f9 10 5 1 4 2 d 2 SW 3 b1 d 3 d 4 211.13. Die set shank with coar Order No d 1 d 2 d 3 d 4 1 2 3 4 5 b 1 SW* 211.13.20.

9 Die set shank with coar Bot-on die set shank, ~DIN ISO d 1 f d 2 SW 3 b1 d 3 d Die set shank with coar Order No d 1 d 2 d 3 d b 1 SW* M16x1, M16x1, M20x1, M20x1, M24x1, M24x1, M30x M30x *SW = width across fats d 1 f ø d ø9(4x) d 10 d Bot-on die set shank, ~DIN ISO Order No d 1 d 2 d 10 d C9

Couping spigot with thread Die set couping spigot 212.11. SW d 5 d 4 3 5 s 1 s 3 s 2 d 3 212.11. Couping spigot with thread Order No d 3 d 4 d 5 3 5 s 1 s 2 s 3 SW* 212.

5 43 60 *SW = width across fats 212.15. d 5 d 4 3 5 9 s s 2 1 ø9(4x) ø15 d 7 d 8 212.15. Die set couping spigot Order No d 4 d 5 d 7 d 8 3 5 s 1 s 2 212.15.063 25 32 46 63 18 31 13 6.

10 Couping spigot with thread Die set couping spigot SW d 5 d s 1 s 3 s 2 d Couping spigot with thread Order No d 3 d 4 d s 1 s 2 s 3 SW* M16x1, M20x1, M24x1, M30x *SW = width across fats d 5 d s s 2 1 ø9(4x) ø15 d 7 d Die set couping spigot Order No d 4 d 5 d 7 d s 1 s C10

Spigot hoder Screw-in ifter stud VDI 3366 212.16. d 1 d9 10 3 s 2 s 1 1 2 5 4 d 2 d d 4 d 5 8 212.16. Spigot hoder Order No Work area d 1 d 2 d 4 d 5 d 8 1 2 3 4 s 1 s 2 212.

12. Screw-in ifter stud VDI 3366 Order No d 1 d 3 2 3 4 5 SW* Lifting capacity [kg] 213.12.016 16 M16 20 28 5 58 24 320 213.12.020 20 M20 22 34 6 68 30 500 213.

11 Spigot hoder Screw-in ifter stud VDI d 1 d s 2 s d 2 d d 4 d Spigot hoder Order No Work area d 1 d 2 d 4 d 5 d s 1 s VDI 3366 SW d 1 d Screw-in ifter stud VDI 3366 Order No d 1 d SW* Lifting capacity [kg] M M M M M *SW = Width across fats C11

12 Screw-in ifter stud with cabe securing device SW d 1 d 3 r For opening the cabe safety device, use key (to be ordered separatey) Screw-in ifter stud with cabe securing device Order No d 1 d SW* r Lifting capacity [kg] M M M M *SW = Width across fats C12

Lifter stud VDI 3366 Lifter stud with cabe securing device, with weded disc 2130.11. 5 t 2 d 2 d f 2 3 6 4 d 1 f f d 1 4 6 4 2130.11. Lifter stud VDI 3366 Order No d 1 d 2 d 4 f 2 3 4 5 6 t Number of screw hoes Lifting capacity [kg] 2130.

5 2 3200 2130.11.060 50 26 40 60 12 45 22 160 59 25.5 2 5000 2130.11.080 63 22 33 80 12 50 20 200 78 21.5 4 8000 2130.11.100 80 26 40 100 15 65 25 250 100 25.5 4 12500 2130.11.120 100 33 48 120 15 80 30 300 125 32 4 20000 2130.

13 Lifter stud VDI 3366 Lifter stud with cabe securing device, with weded disc t 2 d 2 d f d 1 f f d Lifter stud VDI 3366 Order No d 1 d 2 d 4 f t Number of screw hoes Lifting capacity [kg] t d 5 d 5 f f d 1 d 1 f 2 d 2 d Lifter stud with cabe securing device, with weded disc Order No d 1 d 2 d 4 d 5 * f t Number of screw hoes Lifting capacity [kg] *Puey for cabe securing device weded on C13

Lifter stud with cabe securing device 2130.13. d 4 d 2 r t 2 4 3 6 5 d 1 f/2 f d 1 f r 4 6 For opening the cabe safety device, use key 2130.00.03.01 (to be ordered separatey). 2130.13. Lifter stud with cabe securing device Order No d 1 d 2 d 4 f 2 3 4 5 6 r t Number of screw hoes Lifting capacity [kg] 2130.

14 Lifter stud with cabe securing device d 4 d 2 r t d 1 f/2 f d 1 f r 4 6 For opening the cabe safety device, use key (to be ordered separatey) Lifter stud with cabe securing device Order No d 1 d 2 d 4 f r t Number of screw hoes Lifting capacity [kg] C14

Lifter stud 213.13. 20 d 2 d 3 6 b h h 1 7 d 4 d 1 t 1 t 2 30 2 4 4 3 5 213.13. Lifter stud Order No b d 1 d 2 d 3 d 4 h h 1 2 3 4 5 6 7 t 1 t 2 Lifting capacity [kg] 213.13.060 60 32 13.

15 Lifter stud d 2 d 3 6 b h h 1 7 d 4 d 1 t 1 t Lifter stud Order No b d 1 d 2 d 3 d 4 h h t 1 t 2 Lifting capacity [kg] C15

16 Lifting eye bot, high tensie d F 1 b a F 2 F 2 c M e Description: During use check that the eyebot is firmy seated. Rotation during the ifting operation must be avoided. It wi not rotate automaticay to the correct oad ange. Not approved for mining appications. Materia: , heavy duty heat treated. 100% eectromagneticay crack tested, to EN , safety factor 4:1. Ensure that the boting surface is fat. Thread must be screwed in competey. Format: = octagona, Grade 8. Identification: cear indication of permissibe oad for F 2 category critica oads (not permissibe for DIN 580) Lifting eye bot, high tensie Order No a b c d M e M M M M M M M M M M M M Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement F 1 F 2 of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No carried oad in tonnes ,4 0, ,8 1, ,6 3, We recommend that you use the eyebot that is adjustabe in the direction of force for the type of suspension with no detais of carried oads! C16

Lifting eye bot, rotatabe 2131.11. 360 d F 1 e 1 c a b F 2 F 2 M e Description: During use check that the hexagon socket screw is firmy seated.

17 Lifting eye bot, rotatabe d F 1 e 1 c a b F 2 F 2 M e Description: During use check that the hexagon socket screw is firmy seated. Can be set for the direction of appication so that there is no accidenta turning and fipping over. Captive hexagon socket screw. No toos are required as the hexagon socket screw is suppied with a hardened star profie key. The star profie key engages in the hexagon socket. It can be screwed and unscrewed by hand. Make sure that the ring is free to rotate through 360 when the unit is screwed in. Materia: , forged, heavy duty heat treated. 100% eectromagneticay crack tested, to EN , safety factor 4:1. Ensure that the boting surface is fat. Thread must be screwed in competey. Format: steate ceary distinguishabe to DIN 580 eye bot Identification: cear indication of permissibe oad for the oading capacity in the pane of the ring Lifting eye bot, rotatabe Order No a b c d e e 1 M M M M M M M M M M M48 Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement F 1 F 2 of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No carried oad in tonnes ,4 2 0,8 0,56 0,4 0,4 0,84 0,6 0, ,4 2 0,8 0,56 0,4 0,4 0,84 0,6 0, ,75 4 1,5 1 0,75 0,75 1,6 1,12 0, , ,1 1,5 1,5 3,15 2,25 1, ,3 12 4,6 3,22 2,3 2,3 4,83 3,45 2, ,2 16 6,4 4,48 3,2 3,2 6,7 4,8 3, , ,3 4,5 4,5 9,4 6,7 4, , ,7 10, , ,9 13, , , C17

Hoisting snap ink, omnidirectiona 2131.15. b c X SW n r h g d a f t e X M ødb j k Description: The hinged unit is free to rotate through 360, sef-aign with the direction of pu and foding.

18 Hoisting snap ink, omnidirectiona b c X SW n r h g d a f t e X M ødb j k Description: The hinged unit is free to rotate through 360, sef-aign with the direction of pu and foding. The hoisting Snap Link must be instaed in the stress direction before oading, must be abe to move freey and may not be supported at an ange. Do not rotate under oad. Fu oad bearing capacity in any direction. Compete with a 100% crack-checked outer and inner hexagona bot for universa too use. Ensure that the boting surface is fat. Thread must be screwed in competey Hoisting snap ink, omnidirectiona Order No a b max. c d e f g h Standard j k Standard M n SW* R t db Thightening torque [Nm] M M M M M M M M M M M M M *SW = Width across fats Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No Thread carried oad in tonnes M 8 0,3 0,3 0,6 0,6 0,42 0,3 0,3 0,63 0,45 0, M10 0,63 0,63 1,26 1,26 0,88 0,63 0,63 1,32 0,95 0, M12 1,0 1,0 2,0 2,0 1,4 1,0 1,0 2,1 1,5 1, M16 1,5 1,5 3,0 3,0 2,1 1,5 1,5 3,15 2,25 1, M20 2,5 2,5 5,0 5,0 3,5 2,5 2,5 5,25 3,75 2, M24 4,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4, M27 4,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4, M30 5,0 5,0 10,0 10,0 7,0 5,0 5,0 10,5 7,5 5, M36 7,0 7,0 14,0 14,0 9,8 7,0 7,0 14,7 10,5 7, M36 8,0 8,0 16,0 16,0 11,2 8,0 8,0 16,8 12,0 8, M42 10,0 10,0 20,0 20,0 14,0 10,0 10,0 21,0 15,0 10, M42 15,0 15,0 30,0 30,0 21,0 15,0 15,0 31,5 22,5 15, M48 20,0 20,0 40,0 40,0 28,0 20,0 20,0 42,0 30,0 20,0 C18

Rotary safety eyebot, ight duty, with ba bearing 2131.20. 360 c a 180 a F 3 e g b F 1 F 2 f 1) d 2 d 1 SW Description: For oads that are turned and rotated.

19 Rotary safety eyebot, ight duty, with ba bearing c a 180 a F 3 e g b F 1 F 2 f 1) d 2 d 1 SW Description: For oads that are turned and rotated. Mounted on ba-bearings can be rotated through 360 under oad (F 3 ). Cannot be rotated under fu oad at 90 to the threaded fixing (F 1, F 2 ). Not suitabe for extended rotationa movement when fuy oaded. Can be oaded on a sides with a safety factor 4:1. High-strength suspension eye conforming to EN ) Other thread engths avaiabe upon request. Ensure that the boting surface is fat. Thread must be screwed in competey. The threaded connection on the transported oad must be suitabe for transferring forces Rotary safety eyebot, ight duty, with ba bearing Order No Rated carrying capacity for F 1 [t] a b c d 1 d 2 e f g SW* *SW = Width across fats Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement F 3 F 1 (F 2 ) of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No Thread carried oad in tonnes M 8 0,6 0,3 (0,4) 1,2 0,6 (0,8) 0,42 (0,56) 0,3 (0,4) 0,3 (0,4) 0,63 (0,84) 0,45 (0,6) 0,3 (0,4) M10 0,9 0,45 (0,6) 1,8 0,9 (1,2) 0,63 (0,84) 0,45 (0,6) 0,45 (0,6) 0,95 (1,26) 0,68 (0,9) 0,45 (0,6) C19

Rotary safety eyebot, heavy duty, with ba bearing 2131.21. a b c F 3 a 360 180 F 1 F 2 e SW f d 1 d 2 Description: For oads that are turned and rotated.

20 Rotary safety eyebot, heavy duty, with ba bearing a b c F 3 a F 1 F 2 e SW f d 1 d 2 Description: For oads that are turned and rotated. Mounted on ba-bearings can be rotated through 360 under oad (F 3 ). Cannot be rotated under fu oad at 90 to the threaded fixing (F 1, F 2 ). Not suitabe for extended rotationa movement when fuy oaded. Can be oaded on a sides with a safety factor 4:1. Ensure that the boting surface is fat. Thread must be screwed in competey. The threaded connection on the transported oad must be suitabe for transferring forces Rotary safety eyebot, heavy duty, with ba bearing Order No Rated carrying capacity for F 1 [t] a b c d 1 d 2 e f SW* *SW = Width across fats Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement F 3 F 1 (F 2 ) of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricatrica asymme Order No Thread carried oad in tonnes M36 12,5 8 (10) (20) 11,2 (14) 8 (10) 8 (10) 16,8 (21) 12 (15) 8 (10) M (12,5) (25) 14 (17,5) 10 (12,5) 10 (12,5) 21 (26,2) 15 (18,8) 10 (12,5) [M45] (12,5) (25) 14 (17,5) 10 (12,5) 10 (12,5) 21 (26,2) 15 (18,8) 10 (12,5) M (12,5) (25) 14 (17,5) 10 (12,5) 10 (12,5) 21 (26,2) 15 (18,8) 10 (12,5) M (18) (36) 21 (25,2) 15 (18) 15 (18) 31,5 (38) 22,5 (27) 15 (18) M (18) (36) 21 (25,2) 15 (18) 15 (18) 31,5 (38) 22,5 (27) 15 (18) M (40) (80) 49 (56) 35 (40) 35 (40) 73,5 (84) 52,5 (60) 35 (40) C20

Universa rotary safety eyebot with ova ring 2131.25.

21 Universa rotary safety eyebot with ova ring c b a g SW f e m d Description: The unviversa rotary safety eyebots with ova ring with doube ba bearing for smooth non-jerking action tipping, rotating and turning. Aso rotates 90 in direction of screwing in with fu oad. Not suitabe for extended rotationa movement when fuy oaded. The specia design avoids damage to ifting eements and the vauabe oad when turning. For ring hoists, sings, cabes, hooks etc. Ensure that the boting surface is fat. Thread must be screwed in competey Universa rotary safety eyebot with ova ring Order No Rated carrying capacity [t] a b c d e f g m SW* M M M M M M36 90 *SW = Width across fats Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No carried oad in tonnes ,63 0,63 1,26 1,26 0,88 0,63 0,63 1,32 0,95 0, ,5 1,5 3,0 3,0 2,1 1,5 1,5 3,15 2,25 1, ,5 2,5 5,0 5,0 3,5 2,5 2,5 5,25 3,75 2, ,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4, ,5 5,0 13,0 10, ,5 7,5 5, ,0 8,0 20,0 16,0 11,2 8,0 8,0 16,8 12,0 8,0 C21

Universa rotary safety eyebot for chain 2131.26.

22 Universa rotary safety eyebot for chain a g SW f m d Description: The unviversa rotary safety eyebots for chains with doube ba bearing for smooth non-jerking action tipping, rotating and turning. Aso rotates 90 in direction of screwing in with fu oad. Not suitabe for extended rotationa movement when fuy oaded. The specia design avoids damage to ifting eements and the vauabe oad when turning. For ring hoists, sings, cabes, hooks etc. Ensure that the boting surface is fat. Thread must be screwed in competey. Use ony Grade 10 chains. Suppied without chain Universa rotary safety eyebot for chain a Order No Rated carrying capacity [t] Chain connection d f g m SW* M M M M M M36 90 *SW = Width across fats Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No carried oad in tonnes ,63 0,63 1,26 1,26 0,88 0,63 0,63 1,32 0,95 0, ,5 1,5 3,0 3,0 2,1 1,5 1,5 3,15 2,25 1, ,5 2,5 5,0 5,0 3,5 2,5 2,5 5,25 3,75 2, ,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4, ,5 5,0 13,0 10, ,5 7,5 5, ,0 8,0 20,0 16,0 11,2 8,0 8,0 16,8 12,0 8,0 C22

Universa rotary safety eyebot with eye hook 2131.23.

23 Universa rotary safety eyebot with eye hook f e g b a c SW m d Description: The unviversa rotary safety eyebots with eye hooks with doube ba bearing for smooth non-jerking action tipping, rotating and turning. Aso rotates 90 in direction of screwing in with fu oad. Not suitabe for extended rotationa movement when fuy oaded. The specia design avoids damage to ifting eements and the vauabe oad when turning. For ring hoists, sings, cabes, hooks etc. Ensure that the boting surface is fat. Thread must be screwed in competey Universa rotary safety eyebot with eye hook Order No Rated carrying capacity [t] a b c d e f g m SW* , M , M M M M M36 90 *SW = Width across fats Max. carried oad G in tonnes for various types of attachment Type of attachment, Arrangement of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymmetricaca asymmetri Order No carried oad in tonnes ,63 0,63 1,26 1,26 0,88 0,63 0,63 1,32 0,95 0, ,5 1,5 3,0 3,0 2,1 1,5 1,5 3,15 2,25 1, ,5 2,5 5,0 5,0 3,5 2,5 2,5 5,25 3,75 2, ,0 4,0 8,0 8,0 5,6 4,0 4,0 8,4 6,0 4, ,5 5,0 13,0 10,0 7 5,0 5,0 10,5 7,5 5, ,0 8,0 20,0 16,0 11,2 8,0 8,0 16,8 12,0 8,0 C23

24 Ring bock with position ock k 92 ±0,5 n 180 a c b d Lock pate 17 DIN 463 St. 3 h 53 Position ock 6 min. e ±0,5 1x45 ød +0,2 1) 1 d 2 M16 2) g m p max. carrying capacity = 3,0 t when secured at four points k n screw 180 c a b d d 2 Position ock d +0,2 1 h e ±0,5 j g min. f ±0,4 m P Description: The position ocks protect the fixing bots against bending and shear stresses. The ring can be foded down. 1) Dri the hoes for the position ocks first. 2) Fix the ring bock in the position ock and then tap the hoes. Ensure that the boting surface is fat. See aso oading of eyebots. The threaded connection on the transported oad must be suitabe for transferring forces. Fixing: Ony use 100% crack tested bots. Once bots have been in use for some time, check that they are firmy seated. Minimum grade of screws, see tabe: "Y" : Ony use hexagona bots to ISO Fit washers before tightening and securing bots (tightening torque 120 Nm) /030.: Use ony hexagon socket head screws conforming to ISO 4762 ( tightening torque 300 Nm, tightening torque 600 Nm) Ring bock with position ock Order No Rated carrying capacity [t] a b c d d 1 d 2 e f g h j k m n y p M M M Max. carried oad G in tonnes for various types of attachment Type of attachment, F 3 F 1 (F 2 ) Arrangement of the suspension points G G G G G G G G Number of ines symmetrica 2 3 and 4 symmetrica 3 and 4 Ange of incination/ oad direction asymm asymm. Order No Thread carried oad in tonnes M , ,3 4, M M , , C24

25 Lifting fange with bot with safety ring, to BMW b ø27 d 4 p r ø22 H7 1 e t d 2 c = (2 x r) d h w v n m m u u t t k d 1 s g g f a 10 x 45 h w v m m u u t t R45 k d 1 s f a Centering pin to be ordered separatey Order No for spare part bot with safety ring: Order No for ifting fange with bot, with safety ring, two centering pins and fixing screws, to BMW: Lifting fange with bot with safety ring, to BMW Order No max. carrying capacity (2 ifting fanges) [kg]* d 1 d 2 a b c e f g h k m n p s t u v w DD d 4 t 1 Socket head cap screw DIN EN ISO M16x M20x M24x M30x M30x160 *The maximum permissibe oad capacity is to be cacuated such that two ifting fanges one their own are capabe of carrying or turning the too. C25

26 Lifting fange with bot with safety ring øm øg p n o w f a b ød 3 h c d Order No for spare part bot with safety ring: Lifting fange with bot with safety ring Order No max. carrying capacity (2 ifting fanges) [kg]* a b c d f g H13 h m n o p w d *The maximum permissibe oad capacity is to be cacuated such that two ifting fanges one their own are capabe of carrying or turning the too. C26

27 Lifting fange with bot with safety ring øo øn øg m a c b p q r i w t f ød 3 h s d e Order No for spare part bot with safety ring: Lifting fange with bot with safety ring Order No max. carrying capacity (2 ifting fanges) [kg]* a b c d e f g H13 h i m n o p q r s t w d *The maximum permissibe oad capacity is to be cacuated such that two ifting fanges one their own are capabe of carrying or turning the too. C27

Lifting fange with bot with safety ring, with feather key, to CNOMO Standard 2133.13. Order No for spare part bot with safety ring: 2132.11.032 für 2133.13.033 2132.11.040 für 2133.13.041 Feather key to DIN 6885: 14x9x63 up to 2133.

28 Lifting fange with bot with safety ring, with feather key, to CNOMO Standard Order No for spare part bot with safety ring: für für Feather key to DIN 6885: 14x9x63 up to x10x100 up to Lifting fange with bot with safety ring, with feather key, to CNOMO Standard Order No max. carrying capacity (2 ifting fanges) [kg]* a b c d e f g h j k m n p q r s t u v w y z a 1 b 1 d 1 e 1 f 1 g *The maximum permissibe oad capacity is to be cacuated such that two ifting fanges one their own are capabe of carrying or turning the too. C28

29 Die ifting bot with safety ring, VDI Mounting exampe It is important to ensure that there is safety cearance on both outer sides of the cast cheeks and that there is room for instaation on one side. The Lifting bot must aways be introduced from the outside of the too towards the midde Die ifting bot with safety ring, VDI 3366 Order No max. carrying capacity (2 die ifting bots) [kg]* d d 1 d 2 d 3 d s s M M M M M *The maximum permissibe oad capacity is to be cacuated such that two bots on their own are capabe of carrying or turning the too. C29

30 Die ifting bot with safety ring and spring, to VW standard d d 1 h11 d 1 h11 Mounting exampe d 2 d 1 h s +0,2 s 1 +0, It is important to ensure that there is safety cearance on both outer sides of the cast cheeks and that there is room for instaation on one side. The Lifting bot must aways be introduced from the outside of the too towards the midde Die ifting bot with safety ring and spring, to VW standard Order No max. carrying capacity (2 die ifting bots) [kg]* d d 1 d s s *The maximum permissibe oad capacity is to be cacuated such that two bots on their own are capabe of carrying or turning the too. C30

Die ifting bot with safety ring, CNOMO Standard 2132.11.

31 Die ifting bot with safety ring, CNOMO Standard Mounting exampe It is important to ensure that there is safety cearance on both outer sides of the cast cheeks and that there is room for instaation on one side. The ifter bot must aways be introduced from the outside of the too towards the midde. **Stee spring incuded Die ifting bot with safety ring, CNOMO Standard Order No max. carrying capacity (2 die ifting bots) [kg]* d d 1 d 2 d 3 d s s 1 s 2 t *The maximum permissibe oad capacity is to be cacuated such that two bots on their own are capabe of carrying or turning the too. C31

32 Bush for die ifting bot Mounting exampe d 1 d 3 d 2 d 1 d 3 d 2 Description: Bush for casting-in for ifting bots /11. Materia: Stee Bush for die ifting bot Order No max. carrying capacity (2 die ifting bots) [kg] d 1 d 2 d 3 Number of grooves C32

33 Die ifting bot with safety ring, for ifting fange Mounting exampe øg It is important to ensure that there is safety cearance on both outer sides of the cast cheeks and that there is room for instaation on one side. The ifter bot must aways be introduced from the outside of the too towards the midde Die ifting bot with safety ring, for ifting fange Order No max. carrying capacity (2 die ifting bots) [kg]* g d d 1 d 2 d 3 d s s M M M M M *The maximum permissibe oad capacity is to be cacuated such that two bots on their own are capabe of carrying or turning the too. C33

34 Camp, forked shape, DIN 6315-B Camping caw, goose-neck shape a 1 a 2 b 2 b 3 c b 1 Materia: Heat-treated stee, painted Hoding and contact surfaces are pane-parae. High camping forces can be achieved by using high-strength screws conforming to DIN 787. The dimensions of the hoding strap shoud be matched to the strength of the bots. Suppied without camping bots, suitabe camping bots: Camp, forked shape, DIN B Order No a 1 a 2 b 1 b 2 b 3 c o o o o o o o o o e k b 1 f a 2 b 2 h m a 1 Materia: Forged and heat-treated stee, gavanised and yeow passivated Camping caws quicky span very different camping heigths without the need for additiona supports and take up very itte space on the machine tabe. They are designed for maximum oads and are particuary suitabe for camping cutting and punching toos Camping caw, goose-neck shape Order No a 1 a 2 b 1 b 2 e f k m Camping height h o o Suppied without camping bots, suitabe camping bots: C34

Camping caw, infinitey variabe 2140.13. c d d 1 h e a 1 b 1 f a 2 b 2 2140.13. Camping caw, infinitey variabe Order No a 1 a 2 b 1 b 2 c d e f h* Camping bot d 1 x a 1 x 2140.13.12.

35 Camping caw, infinitey variabe c d d 1 h e a 1 b 1 f a 2 b Camping caw, infinitey variabe Order No a 1 a 2 b 1 b 2 c d e f h* Camping bot d 1 x a 1 x M12x12x M12x14x M16x16x M16x18x M16x16x M16x18x M20x22x200 *Camping height Materia: Stee, forged and head-treated, tempered in burnishing cay. Camping caws quicky span very different camping heigths without the need for additiona supports and take up very itte space on the machine tabe. They are designed for maximum oads and are particuary suitabe for camping cutting and punching toos. Suppied without camping bots, suitabe camping bots: c d k h m e a 1 b 1 f a 2 a 2 b Camping caw, infinitey variabe Order No a 1 a 2 b 1 b 2 c d e f k m h max o o o o Materia: Forged and heat-treated stee, gavanised and yeow passivated Camping caws quicky span very different camping heigths without the need for additiona supports and take up very itte space on the machine tabe. They are designed for maximum oads and are particuary suitabe for camping cutting and punching toos. Suppied without camping bots, suitabe camping bots: C35

Camp, straight, DIN 6314 Camp, straight, with setscrew 2140.16. a 1 b 3 a 2 b 2 c e 1 e 2 b 1 Materia: Heat-treated stee, painted Hoding and contact surfaces are pane-parae.

36 Camp, straight, DIN 6314 Camp, straight, with setscrew a 1 b 3 a 2 b 2 c e 1 e 2 b 1 Materia: Heat-treated stee, painted Hoding and contact surfaces are pane-parae. High camping forces can be achieved by using high-strength screws conforming to DIN 787. The dimensions of the hoding strap shoud be matched to the strength of the bots. Suppied without camping bots, suitabe camping bots: : c = 35 mm, does not conform to DIN Camp, straight, DIN 6314 Order No a 1 a 2 b 1 b 2 b 3 c e 1 e o o o o o o d 1 d 2 h b 3 a 1 a 2 c b 2 e 1 e 2 b 1 Materia: Heat-treated stee, painted. Suppied with camping bots and setscrews for T grooves conforming to DIN with nuts and washers Camp, straight, with setscrew Order No a 1 a 2 b 1 b 2 b 3 c d 1, 2 e 1 e 2 h* Camping bot d 1 x a 1 x M M10x10x M M12x12x M M12x14x M M16x16x M M16x18x M M20x20x M M20x22x160 *Camping height depends on the groove depth C36

Camp, goose neck shape, DIN 6316 Camp, goose neck shape, with setscrew 2140.18. 2c e 3 b 3 a 2 b 2 c a 1 e 1 e 2 b 1 2140.18. Camp, goose neck shape, DIN 6316 Order No a 1 a 2 b 1 b 2 b 3 c e 1 e 2 e 3 2140.

18 18 160 50 25 25 49 50 20 2140.18.22.160 20 o. 22 22 160 60 30 30 55 55 24 2140.18.22.200 20 o. 22 22 200 60 30 30 55 70 24 2140.18.26.

37 Camp, goose neck shape, DIN 6316 Camp, goose neck shape, with setscrew c e 3 b 3 a 2 b 2 c a 1 e 1 e 2 b Camp, goose neck shape, DIN 6316 Order No a 1 a 2 b 1 b 2 b 3 c e 1 e 2 e o o o o o Materia: Heat-treated stee, painted Hoding and contact surfaces are pane-parae. High camping forces can be achieved by using high-strength screws conforming to DIN 787. The dimensions of the hoding strap shoud be matched to the strength of the bots. Suppied without camping bots, suitabe camping bots: : c = 35 mm, does not conform to DIN d 1 d 2 h 2c e 3 b 3 a 2 b 2 c a 1 e 1 e 2 b Camp, goose neck shape, with setscrew Order No a 1 a 2 b 1 b 2 b 3,c d 1, 2 e 1 e 2 e 3 h* Camping bot d 1 x a 1 x M M10x10x M M12x12x M M12x14x M M16x16x M M16x18x M M20x20x M M20x22x160 *Camping height depends on the groove depth Materia: Heat-treated stee, painted. Suppied with camping bots and setscrews for T grooves conforming to DIN with nuts and washers. C37

Support, adjustabe Stepped Bock DIN 6318 2140.20. d 1 12 h h 1 d 2 Materia: Heat-treated stee, painted Centring hoe diameter 12 mm. Spinde with sef-ocking trapezoida thread and end ock. 2140.20. Support, adjustabe Order No h h 1 d 1 d 2 F max [dan] 2140.

38 Support, adjustabe Stepped Bock DIN d 1 12 h h 1 d 2 Materia: Heat-treated stee, painted Centring hoe diameter 12 mm. Spinde with sef-ocking trapezoida thread and end ock Support, adjustabe Order No h h 1 d 1 d 2 F max [dan] B 90 b A h h 30 7, ,5 a a b 1 Materia: Engineering cast iron, painted. Hoding and contact surfaces are pane-parae. High camping forces can be achieved by using high-strength screws conforming to DIN 787. The dimensions of the hoding strap shoud be matched to the strength of the bots Stepped Bock DIN 6318 Order No Size = h +37,5 a b b 1 h Shape A B B B B B A B B C38

Set screw Hexagon Nut DIN 6330 B 2140.02. d 2 M k d 3 2140.02. Set screw Order No M d 2 d 3 k 2140.02.10 M10 16 30 8 39 2140.02.12 M12 20 36 10 48 2140.02.16 M16 25 42 13 55 2140.02.20 M20 25 50 16 69 2140.

39 Set screw Hexagon Nut DIN 6330 B d 2 M k d Set screw Order No M d 2 d 3 k M M M M M Materia: heat-treated, strength cass m e s M Hexagon Nut DIN 6330 B Order No M e m s M M M M M M M M M M Materia: heat-treated, strength cass 10.9 Use washers conforming to DIN C39

Hexagon nut with coar, DIN 6331 Washer DIN 6340 2140.33. d 1 a m e s M Materia: heat-treated, strength cass 10.9 Execution: turned and mied Thread ength 1,5 x M 2140.33. Hexagon nut with coar, DIN 6331 Order No M a d 1 e m s 2140.

40 Hexagon nut with coar, DIN 6331 Washer DIN d 1 a m e s M Materia: heat-treated, strength cass 10.9 Execution: turned and mied Thread ength 1,5 x M Hexagon nut with coar, DIN 6331 Order No M a d 1 e m s M M M M M M M M M M s d 2 d 1 Materia: heat-treated, strength N/mm² Washer DIN 6340 Order No M d 1 d 2 s M M M M M M M M M M C40

Screw for T-sot, DIN 787 2140.30. d 1 b a 1 k a e Materia: heat-treated, M 8 M12 to strength cass 10.9 M14 M30 to strength cass 8.8 Execution: forged, thread roed, T-sot mied 2140.30. Screw for T-sot, DIN 787 Order No a 1 a b d 1 e k Order No a 1 a b d 1 e k 2140.

41 Screw for T-sot, DIN d 1 b a 1 k a e Materia: heat-treated, M 8 M12 to strength cass 10.9 M14 M30 to strength cass 8.8 Execution: forged, thread roed, T-sot mied Screw for T-sot, DIN 787 Order No a 1 a b d 1 e k Order No a 1 a b d 1 e k M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M C41

42 Hexagon socket head cap screw, DIN EN ISO Strength cass s k 1 d M Hexagon socket head cap screw, DIN EN ISO Strength cass 8.8 Order No M 1 d k s Order No M 1 d k s M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M C42

43 Hexagon socket head cap screw, DIN EN ISO Strength cass Hexagon socket head cap screw, DIN EN ISO Strength cass 12.9 Order No M 1 d k s Order No M 1 d k s Order No M 1 d k s M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M C43

44 Hexagon socket head cap screw, with ow profie head and key guide, DIN Strength cass s k 1 d M Hexagon socket head cap screw, with ow profie head and key guide, DIN Strength cass 8.8 Order No M 1 d k s Order No M 1 d k s M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M C44

Socket head cap screw, with ow profie head, DIN 7984 - Strength cass 8.8 2192.40. s k 1 d M 2192.40. Socket head cap screw, with ow profie head, DIN 7984 - Strength cass 8.

45 Socket head cap screw, with ow profie head, DIN Strength cass s k 1 d M Socket head cap screw, with ow profie head, DIN Strength cass 8.8 Order No M 1 d k s Order No M 1 d k s M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M C45

46 Hexagon socket countersunk head cap screw, ISO Strength cass s k 90 d M g Hexagon socket countersunk head cap screw, ISO Strength cass 8.8 Order No M g d k s M M M M M M M M M M M M M M M M M C46

Screw pug 2192.90. SW M ød øc 50 b 1x45 3 42 50 10 Description: Repair soution: Screw pugs are used to sea off defective borehoes, pass-through hoes or shrink hoes.

47 Screw pug SW M ød øc 50 b 1x Description: Repair soution: Screw pugs are used to sea off defective borehoes, pass-through hoes or shrink hoes. Screw in the screw pug as far as it wi go (minimum screw-in ength =diameter). The screw pug can be secured to prevent it becoming oose during reworking by appying, for exampe, high-strength LOCTITE (order no ). Remove width across fats and protuding thread mechanicay Screw pug Order No Materia M b c d SW* C15 (1.0401) M12x1, C15 (1.0401) M16x1, C15 (1.0401) M20x1, C15 (1.0401) M24x1, C15 (1.0401) M28x1, C15 (1.0401) M30x1, C15 (1.0401) M32x1, GG25 (EN-GJL-250) M12x1, GG25 (EN-GJL-250) M16x1, GG25 (EN-GJL-250) M20x1, GG25 (EN-GJL-250) M24x1, GG25 (EN-GJL-250) M28x1, GG25 (EN-GJL-250) M30x1, GG25 (EN-GJL-250) M32x1, *SW = Width across fats C47

Fat mushroom head screw with hexagon socket 2192.61. k c a d s M d a R Mounting exampe z.b.: 2052.70. Materia: Strength cass 10.9 = Code No 1. 2192.61. Fat mushroom head screw with hexagon socket Order No M k s c a d a d R 2192.

48 Fat mushroom head screw with hexagon socket k c a d s M d a R Mounting exampe z.b.: Materia: Strength cass 10.9 = Code No Fat mushroom head screw with hexagon socket Order No M k s c a d a d R M M M M M M M C48

49 C49

50 Camping too set Camping too set with camping jaws and screw paste. The camping too set is designed for machine toos with bedpates that have fixing sots and they contain a the necessary components for fast camping of toos, devices and workpieces. A parts are interchangeabe and compementary to each other. They are made of high tensie stee to DIN or company standards. Bot items strength cass 8 or 10. The wooden box has a detachabe hinged cover Camping too set Order No Contents Universacamping units Step camps Screws for fixing sots DIN 787 (Order No ) Pin screws Hexagona nuts 1.5 d deep Conica sockets, simiar to DIN Extension nuts 3.0 d deep Camping jaws, type Bue T-sot scraper Ring/open ended spanners Screw paste Size No. Size No. Size No. Size No. Size No. Size No. Size No. Size No. Size No. Size No. No M M M M M M10 M12 M12 M16 M M10 M12 M12 M16 M M10 M12 M12 M16 M C50

Camping Too Set Camping too set With spring-mounted camp hoder and screw paste. Description as 2140.01.01 but without camping jaws. Contains 4 spring-mounted camp hoders instead. 2140.01.02.

51 Camping Too Set Camping too set With spring-mounted camp hoder and screw paste. Description as but without camping jaws. Contains 4 spring-mounted camp hoders instead Camping Too Set Order No Contents Universa- Size camping units No. Size Step camps No. Screws for fixing sots Size DIN 787 No. (Order No ) Size Pin screws No. Hexagona nuts Size 1.5 d deep No. Conica sockets. simiar Size to DIN No. Extension nuts 3 d deep Size No. Size T-sot scraper No. Ring/open ended Size spanners No. Size Nuts for fixing sots No. Size. Camp hoders No. Screw paste No M M M M M M M M M10 M12 M12 M16 M16 M20 M20 M M10 M12 M12 M16 M16 M20 M20 M M10 M12 M12 M16 M16 M20 M20 M M C51

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections

A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components